抽象针对微网的快速辅助类，三位触摸开关测试通过

TinyNet/Tiny.cpp

@@ -0,0 +1,131 @@
+#include "Tiny.h"
+
+#include "SerialPort.h"
+#include "WatchDog.h"
+#include "Config.h"
+
+#include "Drivers\NRF24L01.h"
+#include "Drivers\ShunCom.h"
+#include "Net\Zigbee.h"
+#include "TinyNet\TinyClient.h"
+
+uint OnSerial(ITransport* transport, ByteArray& bs, void* param, void* param2)
+{
+	debug_printf("OnSerial len=%d \t", bs.Length());
+	bs.Show(true);
+
+	TinyClient* client = TinyClient::Current;
+	if(client) client->Store.Write(1, bs);
+
+	return 0;
+}
+
+void Setup(ushort code, const char* name, COM_Def message, int baudRate)
+{
+	Sys.Code = code;
+	Sys.Name = (char*)name;
+
+    // 初始化系统
+    //Sys.Clock = 48000000;
+    Sys.MessagePort = message; // 指定printf输出的串口
+    Sys.Init();
+    Sys.ShowInfo();
+
+#if DEBUG
+	// 打开串口输入便于调试数据操作，但是会影响性能
+	SerialPort* sp = SerialPort::GetMessagePort();
+	if(baudRate != 1024000)
+	{
+		sp->Close();
+		sp->SetBaudRate(baudRate);
+		sp->Register(OnSerial);
+		sp->Open();
+	}
+
+	WatchDog::Start(20000);
+#else
+	WatchDog::Start();
+#endif
+}
+
+ITransport* Create2401(SPI_TypeDef* spi_, Pin ce, Pin irq, Pin power, bool powerInvert)
+{
+	static Spi spi(spi_, 10000000, true);
+	static NRF24L01 nrf;
+	nrf.Init(&spi, ce, irq, power);
+	nrf.Power.Invert = powerInvert;
+
+	nrf.AutoAnswer	= false;
+	nrf.PayloadWidth= 32;
+	nrf.Channel		= TinyConfig::Current->Channel;
+	nrf.Speed		= TinyConfig::Current->Speed;
+
+	//if(!nrf.Check()) debug_printf("请检查NRF24L01线路\r\n");
+
+	return &nrf;
+}
+
+ITransport* CreateShunCom(COM_Def index, int baudRate, Pin rst, Pin power, Pin slp, Pin cfg)
+{
+	static SerialPort sp(index, baudRate);
+	static ShunCom zb;
+	zb.Power.Init(power, TinyConfig::Current->HardVer < 0x08);
+	zb.Sleep.Init(slp, true);
+	zb.Config.Init(cfg, true);
+	zb.Init(&sp, rst);
+
+	return &zb;
+}
+
+TinyClient* CreateTinyClient(ITransport* port)
+{
+	static TinyController ctrl;
+	ctrl.Port	= port;
+	static TinyClient tc(&ctrl);
+	tc.Cfg		= TinyConfig::Current;
+
+	TinyClient::Current	= &tc;
+
+	//ctrl.Mode	= 3;
+	//ctrl.Open();
+
+	return &tc;
+}
+
+void* InitConfig(void* data, uint size)
+{
+	// Flash最后一块作为配置区
+	Config::Current	= &Config::CreateFlash();
+
+	// 启动信息
+	HotConfig* hot	= &HotConfig::Current();
+	hot->Times++;
+
+	data = hot->Next();
+	if(hot->Times == 1)
+	{
+		memset(data, 0x00, size);
+		((byte*)data)[0] = size;
+	}
+
+	// 默认出厂设置
+	static TinyConfig tc;
+	TinyConfig::Current = &tc;
+	tc.LoadDefault();
+	tc.Channel	= 120;
+	tc.Speed	= 250;
+	tc.HardVer	= 0x08;
+
+	// 尝试加载配置区设置
+	tc.Load();
+
+	return data;
+}
+
+/*void NoUsed()
+{
+	Setup(1234, "");
+	Create2401(SPI1, P0, P0);
+	CreateShunCom(COM2, 38400, P0, P0, P0, P0);
+	CreateTinyClient(NULL);
+}*/

TinyNet/Tiny.h

@@ -0,0 +1,20 @@
+#ifndef _Tiny_H_
+#define _Tiny_H_
+
+#include "Sys.h"
+#include "Net\ITransport.h"
+
+#include "TinyNet\TinyClient.h"
+
+void Setup(ushort code, const char* name, COM_Def message = COM1, int baudRate = 1024000);
+
+void* InitConfig(void* data, uint size);
+
+ITransport* Create2401(SPI_TypeDef* spi_, Pin ce, Pin irq, Pin power = P0, bool powerInvert = false);
+ITransport* CreateShunCom(COM_Def index, int baudRate, Pin rst, Pin power, Pin slp, Pin cfg);
+
+TinyClient* CreateTinyClient(ITransport* port);
+
+//void NoUsed();
+
+#endif

TinyNet/TinyClient.cpp

@@ -5,6 +5,8 @@
 
 #include "JoinMessage.h"
 
+TinyClient* TinyClient::Current	= NULL;
+
 static bool OnClientReceived(Message& msg, void* param);
 
 static void TinyClientTask(void* param);

TinyNet/TinyClient.h

@@ -39,6 +39,8 @@ public:
 	MessageHandler	Received;
 	void*			Param;
 
+	static TinyClient* Current;
+
 // 数据区
 public:
 	DataStore	Store;		// 数据存储区

TinyNet/TinyConfig.cpp

@@ -1,6 +1,8 @@
 #include "TinyConfig.h"
 #include "Config.h"
 
+TinyConfig* TinyConfig::Current	= NULL;
+
 // 初始化
 /*TinyConfig::TinyConfig()
 {

TinyNet/TinyConfig.h

@@ -41,6 +41,8 @@ struct TinyConfig
 	// 序列化到消息数据流
 	void Write(Stream& ms) const;
 	void Read(Stream& ms);
+
+	static TinyConfig* Current;
 };
 
 #pragma pack(pop)	// 恢复对齐状态