The n_type field in the symbol table entry has two interpretations in XCOFF32, and a single interpretation in XCOFF64.
The new interpretation is used in XCOFF32 if the value of the o_vstamp field in the auxiliary header is 2.
In XCOFF64 and the new XCOFF32 interpretation, the n_type field is used for the symbol type and visibility.
The patch writes the aux header with an o_vstamp field value of 2 when the visibility is specified in XCOFF32 to make the new XCOFF32 interpretation used.
Reviewed By: DiggerLin, jhenderson
Differential Revision: https://reviews.llvm.org/D128148
We are going to change alignment for DWARF sections. This patch is to
fix functionality issue if the alignment is not the same with
DefaultSectionAlign defined in XCOFFObjectWriter.cpp.
Currently no test for this patch as for now alignment for DWARF sections
and other sections are always the same. This patch will be tested when
patch changing DWARF section is merged in.
Reviewed By: Esme
Differential Revision: https://reviews.llvm.org/D116092
This is a follow on to the revert of D84265 to add an error if we'd need
to write a non-zero visibility type in the xcoff object file. We can't
currently do that because we lack the auxilary header to interpret the
bits in XCOFF32. This is important because visibility is being enabled
in the assembly writing path, and without this error the visibility
could be silently ignored.
Differential Revision: https://reviews.llvm.org/D124392
This is the first patch to enable the XCOFF64 object writer.
Currently only fileHeader and sectionHeaders are supported.
Reviewed By: jhenderson, DiggerLin
Differential Revision: https://reviews.llvm.org/D120861
There's a few relevant forward declarations in there that may require downstream
adding explicit includes:
llvm/MC/MCContext.h no longer includes llvm/BinaryFormat/ELF.h, llvm/MC/MCSubtargetInfo.h, llvm/MC/MCTargetOptions.h
llvm/MC/MCObjectStreamer.h no longer include llvm/MC/MCAssembler.h
llvm/MC/MCAssembler.h no longer includes llvm/MC/MCFixup.h, llvm/MC/MCFragment.h
Counting preprocessed lines required to rebuild llvm-project on my setup:
before: 1052436830
after: 1049293745
Which is significant and backs up the change in addition to the usual benefits of
decreasing coupling between headers and compilation units.
Discourse thread: https://discourse.llvm.org/t/include-what-you-use-include-cleanup
Differential Revision: https://reviews.llvm.org/D119244
Summary: Some structs like FileHeader32/SectionHeader32
defined in llvm/include/llvm/BinaryFormat/XCOFF.h seem
unnecessary, because we only need their size. So this
patch removes them and defines size constants directly.
Reviewed By: jhenderson
Differential Revision: https://reviews.llvm.org/D103901
- Add branch absolute reloction R_RBA, R_TLS relocation for the variable offset
for the tlsgd model and R_TLSM for the region handle for the tlsgd model
- Properly set the relocation fixed values for R_TLS and R_TLSM
- Emit the TCEntry with the variant kind in the XCOFFStreamer
Reviewed by: sfertile, nemanjai, DiggerLin
Differential Revision: https://reviews.llvm.org/D100214
Summary:
This patch implements the backend implementation of adding global variables
directly to the table of contents (TOC), rather than adding the address of the
variable to the TOC.
Currently, this patch will look for the "toc-data" attribute on symbols in the
IR, and then add those symbols to the TOC.
ATM, this is implemented for 32 bit AIX.
Reviewers: sfertile
Differential Revision: https://reviews.llvm.org/D101178
This patch adds support for TLS variables to the XCOFF object writer:
- Add TData and TBSS sections
- Add CsectGroups for the mapping classes XCOFF::XMC_TL and XCOFF::XMC_UL
- Add XMC_UL in the enum entry of CsectStorageMapping class to print the string
while reading the symbol properties for TLS variables
- Fix the starting address of TData and TBSS sections
Reviewed by: hubert.reinterpretcast, DiggerLin
Differential Revision: https://reviews.llvm.org/D98946
This is for XCOFF DWARF support.
Seems when DWARF debug is enable, symbol 0 has special usage
for AIX binder. At least, symbol 0 can not be the .text
section. Otherwise, we get some binding time error.
Add correct C_FILE symbol at index 0 here to make AIX binder
work.
Reviewed By: hubert.reinterpretcast
Differential Revision: https://reviews.llvm.org/D97117
Summary:
In small code model, AIX assembler could not deal with labels that
could not be reached within the [-0x8000, 0x8000) range from TOC base.
So when generating the assembly, we would need to help the assembler
by subtracting an offset from the label to keep the actual value
within [-0x8000, 0x8000).
Reviewed By: hubert.reinterpretcast, Xiangling_L
Differential Revision: https://reviews.llvm.org/D86879
Summary:
Support TOCU and TOCL relocation type for object file generation.
Reviewed by: DiggerLin
Differential Revision: https://reviews.llvm.org/D84549
Summary:
When a desired symbol name contains invalid character that the
system assembler could not process, we need to emit .rename
directive in assembly path in order for that desired symbol name
to appear in the symbol table.
Reviewed By: hubert.reinterpretcast, DiggerLin, daltenty, Xiangling_L
Differential Revision: https://reviews.llvm.org/D82481
If there are more than 65534 relocation entries in a single section,
we should generate an overflow section.
Since we don't support overflow section for now, we should generate
an error.
Differential revision: https://reviews.llvm.org/D81104
This patch intends to provide relocation support for the expression
contains two unpaired relocatable terms with opposite signs.
Differential Revision: https://reviews.llvm.org/D77424
Summary:
For current architect, we always require setContainingCsect to be
called on every MCSymbol got used in XCOFF context.
This is very hard to achieve because symbols gets created everywhere
and other MCSymbol types(ELF, COFF) do not have similar rules.
It's very easy to miss setting the containing csect, and we would
need to add a lot of XCOFF specialized code around some common code area.
This patch intendeds to do
1. Rely on getFragment().getParent() to get csect from labels.
2. Only use get/setRepresentedCsect (was get/setContainingCsect)
if symbol itself represents a csect.
Reviewers: DiggerLin, hubert.reinterpretcast, daltenty
Differential Revision: https://reviews.llvm.org/D77080
SUMMARY:
1.if there is a gap between the end virtual address of one section and the beginning virtual address of the next section, the XCOFFObjectWriter.cpp will hit a assert.
2.as discussed in the patch https://reviews.llvm.org/D66969,
since implemented the function description. We can output the raw object data for function.
we need to create a test for raw text section content and test section header for xcoff object file.
Reviewer: daltenty,hubert.reinterpretcast,jasonliu
Differential Revision: https://reviews.llvm.org/D71845
Summary:
We need to handle the MCSA_LGlobal case in emitSymbolAttribute for functions marked internal in the IR so that the
appropriate storage class is emitted on the function descriptor csect. As part of this we need to make sure that external
labels are not emitted into the symbol table, so we don't emit the descriptor label in the object writing path.
Reviewers: jasonliu, DiggerLin, hubert.reinterpretcast
Reviewed By: jasonliu
Subscribers: Xiangling_L, wuzish, nemanjai, hiraditya, jsji, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D74968
Summary:
When we have a long name for the undefined symbol, we would hit this assertion:
Assertion failed: I != StringIndexMap.end() && "String is not in table!"
This patch addresses that.
Reviewed by: DiggerLin, daltenty
Differential Revision: https://reviews.llvm.org/D74924
Summary:
This patch intends to support three most common relocation type
on AIX: R_POS, R_TOC, R_RBR.
These three relocation type will be needed for object file generation
on AIX for small code model.
We will have follow up patches to bring relocation support for
large code model on AIX.
Reviewers: hubert.reinterpretcast, daltenty, DiggerLin
Differential Revision: https://reviews.llvm.org/D72027
Summary:
When we use undefined symbol with its qualname, we are not able
to generate that symbol because of the logic of early "continue"
that skip the qualname symbol. This patch fixes it.
Differential revision: https://reviews.llvm.org/D71667
SUMMARY:
Fixed a bug of XCOFFObjectFile.cpp when there is padding at the last csect of a sections.
when there is a tail padding of a section, but the value of CurrentAddressLocation do not be increased by the padding size. it will hit assert assert(CurrentAddressLocation == Section->Address && "We should have no padding between sections.");
Reviewers: daltenty,hubert.reinterpretcast,
Differential Revision: https://reviews.llvm.org/D70859
SUMMARY:
if the size of Csect is zero, the Csect do not need write any data into sections
for example, the TOC Csect has zero size, it do not need invoke a
Asm.writeSectionData(W.OS, Csect.MCCsect, Layout);
Reviewers: daltenty
Subscribers: rupprecht, seiyai,hiraditya
Differential Revision: https://reviews.llvm.org/D71120
Summary:
Implement emitTCEntry for PPCTargetXCOFFStreamer.
Add TC csects to TOCCsects for object file writing.
Note:
1. I did not include any raw data testing for this object file generation
because TC entries raw data will all be 0 without relocation implemented.
I will add raw data testing as part of relocation testing later.
2. I removed "Symbol->setFragment(F);" for common symbols because we
don't need it, and if we have it then we would hit assertions below:
Assertion `(SymbolContents == SymContentsUnset ||
SymbolContents == SymContentsOffset) &&
"Cannot get offset for a common/variable symbol"' failed.
3.Fixed incorrect TOC-base alignment.
Differential Revision: https://reviews.llvm.org/D70798
Summary:
This patch sets up the infrastructure for
1. Associate MCSymbolXCOFF with an MCSectionXCOFF when it could not
get implicitly associated.
2. Generate undefined symbols. The patch itself generates undefined symbol
for external function call only. Generate undefined symbol for external
global variable and external function descriptors will be handled in
separate patch(s) after this is land.
Differential Revision: https://reviews.llvm.org/D70443
Summary:
This patch is a follow up on read-only assembly patch D70182.
It intends to enable object file generation for the read-only data section on AIX.
Reviewers: DiggerLin, daltenty
Differential Revision: https://reviews.llvm.org/D70455
esmeyi