Arbitrary stack pointers are accessed using MUBUF instructions with
the voffset field, which is interpreted as the swizzled address. We
want to fold fold into the MUBUF form to use the SP in the SGPR
offset, and previously we were special casing the interpretation of
the pointer value if the access memory operand said it was relative to
the stack pointer.
690f5b7a01 removed this check, and moved
the DAG path to special casing copies from SGPRs. This is not an
entirely sound approach, since it's still changing the interpretation
of pointer values based the context.
Introduce a new pseudo which corresponds to the wave-to-vector address
transform. This way the memory instruction has consistent semantics
where the incoming pointer is always interpreted as a vector address,
and we're not obligated to optimize into the MUBUF offset-only
addressing mode. The DAG should probably have an equivalent pseudo.
This should fix some correctness issues, and folding this into
addressing modes will be a future optimization patch.
We were trying to guess at the original IR type for image intrinsics
after legalization to figure out if they were d16, but this didn't
work. Explicitly track if this is a d16 operation or not in the
opcode, as is done for the buffer intrinsics.
The OpenCL library is using f32 image writes with a dmask of 15 for
some reason, and this was incorrectly switching them to use d16. Fixes
image failures in the OpenCL conformance test. The equivalent dmask
for loads doesn't even select in either selector.
This reverts commit fd4808887e.
This patch causes gcc to issue a lot of warnings like:
warning: base class ‘class llvm::MCParsedAsmOperand’ should be
explicitly initialized in the copy constructor [-Wextra]
The existing constrained shift PatFrags only dealt with masked shift
from OpenCL front-ends. This change copies the
X86DAGToDAGISel::isUnneededShiftMask() function to AMDGPU and uses it in
the shift PatFrag predicates.
Differential Revision: https://reviews.llvm.org/D113448
- Move the `s_and exec` to its correct position before the content of
the waterfall loop
- Use the SI_WATERFALL pseudo instruction, like for sdag, to benefit
from optimizations
- Add support for indirect function calls
To support indirect calls, add a G_SI_CALL instruction without register
class restrictions and insert a waterfall loop when applying register
banks.
Differential Revision: https://reviews.llvm.org/D109052
Rework getConstantstVRegValWithLookThrough in order to make it clear if we
are matching integer/float constant only or any constant(default).
Add helper functions that get DefVReg and APInt/APFloat from constant instr
getIConstantVRegValWithLookThrough: integer constant, only G_CONSTANT
getFConstantVRegValWithLookThrough: float constant, only G_FCONSTANT
getAnyConstantVRegValWithLookThrough: either G_CONSTANT or G_FCONSTANT
Rename getConstantVRegVal and getConstantVRegSExtVal to getIConstantVRegVal
and getIConstantVRegSExtVal. These now only match G_CONSTANT as described
in comment.
Relevant matchers now return both DefVReg and APInt/APFloat.
Replace existing uses of getConstantstVRegValWithLookThrough and
getConstantVRegVal with new helper functions. Any constant match is
only required in:
ConstantFoldBinOp: for constant argument that was bit-cast of float to int
getAArch64VectorSplat: AArch64::G_DUP operands can be any constant
amdgpu select for G_BUILD_VECTOR_TRUNC: operands can be any constant
In other places use integer only constant match.
Differential Revision: https://reviews.llvm.org/D104409
1. Splitted out some parts of R600 target to separate modules/headers.
2. Reduced some include lists in headers.
3. Found and fixed issue with override `GCNTargetMachine::getSubtargetImpl()`
and `R600TargetMachine::getSubtargetImpl()` had different return value type
than base class.
4. Minor forward declarations cleanup.
Reviewed By: foad
Differential Revision: https://reviews.llvm.org/D108596
While v_cmp will AND inactive lanes with 0, that is not the case for logical
operations.
This fixes a Vulkan CTS test that would hang otherwise.
Differential Revision: https://reviews.llvm.org/D105709
Adds legalizer, register bank select, and instruction
select support for G_SBFX and G_UBFX. These opcodes generate
scalar or vector ALU bitfield extract instructions for
AMDGPU. The instructions allow both constant or register
values for the offset and width operands.
The 32-bit scalar version is expanded to a sequence that
combines the offset and width into a single register.
There are no 64-bit vgpr bitfield extract instructions, so the
operations are expanded to a sequence of instructions that
implement the operation. If the width is a constant,
then the 32-bit bitfield extract instructions are used.
Moved the AArch64 specific code for creating G_SBFX to
CombinerHelper.cpp so that it can be used by other targets.
Only bitfield extracts with constant offset and width values
are handled currently.
Differential Revision: https://reviews.llvm.org/D100149
This also adds new interfaces for the fixed- and scalable case:
* LLT::fixed_vector
* LLT::scalable_vector
The strategy for migrating to the new interfaces was as follows:
* If the new LLT is a (modified) clone of another LLT, taking the
same number of elements, then use LLT::vector(OtherTy.getElementCount())
or if the number of elements is halfed/doubled, it uses .divideCoefficientBy(2)
or operator*. That is because there is no reason to specifically restrict
the types to 'fixed_vector'.
* If the algorithm works on the number of elements (as unsigned), then
just use fixed_vector. This will need to be fixed up in the future when
modifying the algorithm to also work for scalable vectors, and will need
then need additional tests to confirm the behaviour works the same for
scalable vectors.
* If the test used the '/*Scalable=*/true` flag of LLT::vector, then
this is replaced by LLT::scalable_vector.
Reviewed By: aemerson
Differential Revision: https://reviews.llvm.org/D104451
This allows to convert the add instruction to s_addk_i32 and
v_add_nc_u32 instead of needing v_add_co_u32 when converting to a VALU
instruction.
Differential Revision: https://reviews.llvm.org/D103322
When flat scratch is used, the stack pointer needs to be added when
writing arguments to the stack.
For buffer instructions, this is done in SelectMUBUFScratchOffen
and SelectMUBUFScratchOffset.
Move that to call argument lowering, like it is done in GlobalISel.
Differential Revision: https://reviews.llvm.org/D103166
For gfx10 gradient (g16) and address (a16) can be independent. Previous
implementation assumed that a16 implied g16.
There are some other changes that fix the verification (as well as asm/disasm)
that are required for the included test to pass - the XFAIL will be removed in
those changes.
This also includes required fixes for GlobalISel
Differential Revision: https://reviews.llvm.org/D102066
Change-Id: I7d171cc90994de05f41669b66a6d0ffa2ed05d09
An address can be a uniform sum of two i64 bit values.
That regularly happens in a loop where index is an induction
variable promoted to 64 bit by the LSR. We can materialize
zero in a VGPR and still use SADDR form of the load.
Differential Revision: https://reviews.llvm.org/D101591
When atomic image intrinsic return value is unused, register class for
destination of a sub-register copy of return value ends up not being set.
This copy then hits 'Register class not set' assert later.
If return value has uses, register class is determined by use instruction.
Fix is to not create sub-register copy when image intrinsic destination has
no uses because it would be deleted by dead-mi-elimination later anyway.
Differential Revision: https://reviews.llvm.org/D101448
Use SIInstrFlags to differentiate between the different
variants of flat instructions (flat, global and scratch).
This should make it easier to bundle the immediate offset logic in a
single place and implement restrictions and bug workarounds.
Fixed version of D99587, which does not rely on the address space.
Differential Revision: https://reviews.llvm.org/D99743
Doing this during instruction selection avoids the cost of running
SIAddIMGInit which is yet another pass over the MIR.
Differential Revision: https://reviews.llvm.org/D99670
This includes gfx908 which only has a no-return version of the
global_atomic_add_f32 instruction, using the same hack that was
previously implemented for selecting from the
llvm.amdgcn.global.atomic.fadd intrinsic.
Differential Revision: https://reviews.llvm.org/D97767
Replace individual operands GLC, SLC, and DLC with a single cache_policy
bitmask operand. This will reduce the number of operands in MIR and I hope
the amount of code. These operands are mostly 0 anyway.
Additional advantage that parser will accept these flags in any order unlike
now.
Differential Revision: https://reviews.llvm.org/D96469
* Add amdgcn_strict_wqm intrinsic.
* Add a corresponding STRICT_WQM machine instruction.
* The semantic is similar to amdgcn_strict_wwm with a notable difference that not all threads will be forcibly enabled during the computations of the intrinsic's argument, but only all threads in quads that have at least one thread active.
* The difference between amdgc_wqm and amdgcn_strict_wqm, is that in the strict mode an inactive lane will always be enabled irrespective of control flow decisions.
Reviewed By: critson
Differential Revision: https://reviews.llvm.org/D96258
* Introduce the new intrinsic amdgcn_strict_wwm
* Deprecate the old intrinsic amdgcn_wwm
The change is done for consistency as the "strict"
prefix will become an important, distinguishing factor
between amdgcn_wqm and amdgcn_strictwqm in the future.
The "strict" prefix indicates that inactive lanes do not
take part in control flow, specifically an inactive lane
enabled by a strict mode will always be enabled irrespective
of control flow decisions.
The amdgcn_wwm will be removed, but doing so in two steps
gives users time to switch to the new name at their own pace.
Reviewed By: critson
Differential Revision: https://reviews.llvm.org/D96257
To do this while supporting the existing functionality in SelectionDAG of using
PGO info, we add the ProfileSummaryInfo and LazyBlockFrequencyInfo analysis
dependencies to the instruction selector pass.
Then, use the predicate to generate constant pool loads for f32 materialization,
if we're targeting optsize/minsize.
Differential Revision: https://reviews.llvm.org/D97732
gfx90a operations require even aligned registers, but this was
previously achieved by reserving registers inside the full class.
Ideally this would be captured in the static instruction definitions
for the operands, and we would have different instructions per
subtarget. The hackiest part of this is we need to manually reassign
AGPR register classes after instruction selection (we get away without
this for VGPRs since those types are actually registered for legal
types).
During instruction selection, there is an inconsistency in choosing
the initial soffset value. With certain early passes, this value is
getting modified and that brought additional fixup during
eliminateFrameIndex to work for all cases. This whole transformation
looks trivial and can be handled better.
This patch clearly defines the initial value for soffset and keeps it
unchanged before eliminateFrameIndex. The initial value must be zero
for MUBUF with a frame index. The non-frame index MUBUF forms that
use a raw offset from SP will have the stack register for soffset.
During frame elimination, the soffset remains zero for entry functions
with zero dynamic allocas and no callsites, or else is updated to the
appropriate frame/stack register.
Also, did some code clean up and made all asserts around soffset
stricter to match.
Reviewed By: scott.linder
Differential Revision: https://reviews.llvm.org/D95071
If constants are hidden behind G_ANYEXT we can treat them same way as G_SEXT.
For that purpose we extend getConstantVRegValWithLookThrough with option
to handle G_ANYEXT same way as G_SEXT.
Differential Revision: https://reviews.llvm.org/D92219
Previously, instructions which could be
expressed as VOP3 in addition to another
encoding had a _e64 suffix on the tablegen
record name, while those
only available as VOP3 did not. With this
patch, all VOP3s will have the _e64 suffix.
The assembly does not change, only the mir.
Reviewed By: foad
Differential Revision: https://reviews.llvm.org/D94341
Change-Id: Ia8ec8890d47f8f94bbbdac43745b4e9dd2b03423
Returning int64_t was arbitrarily limiting for wide integer types, and
the functions should handle the full generality of the IR.
Also changes the full form which returns the originally defined
vreg. Add another wrapper for the common case of just immediately
converting to int64_t (arguably this would be useful for the full
return value case as well).
One possible issue with this change is some of the existing uses did
break without conversion to getConstantVRegSExtVal, and it's possible
some without adequate test coverage are now broken.
It does not seem to fold offsets but this is not specific
to the flat scratch as getPtrBaseWithConstantOffset() does
not return the split for these tests unlike its SDag
counterpart.
Differential Revision: https://reviews.llvm.org/D93670
It is possible for copies or spills to be inserted in the middle of indirect
addressing sequences which use VGPR indexing. Spills to accvgprs could be
effected by the indexing mode.
Add new pseudo instructions that are expanded after register allocation to avoid
the problematic spill or copy placement.
Differential Revision: https://reviews.llvm.org/D91048
It's more future-proof to use isGFX10Plus from the start, on the
assumption that future architectures will be based on current
architectures.
Also make use of the existing isGFX9Plus in a few places.
Differential Revision: https://reviews.llvm.org/D92092
It's fairly common to need matchers for a specific constant value, or for
common idioms like finding a negated register.
Add
- `m_SpecificICst`, which returns true when matching a specific value..
- `m_ZeroInt`, which returns true when an integer 0 is matched.
- `m_Neg`, which returns when a register is negated.
Also update a few places which use idioms related to the new matchers.
Differential Revision: https://reviews.llvm.org/D91397
This change adds a real glc operand to the return atomic
instead of just string " glc" in the middle of the asm
string.
Improves asm parser diagnostics.
Differential Revision: https://reviews.llvm.org/D90730
These instructions use a scaled offset. We were wrongly selecting them
even when the required offset was not a multiple of the scale factor.
Differential Revision: https://reviews.llvm.org/D90607
V_DIV_SCALE_F32/F64 are VOP3B encoded so they can't use the ABS src
modifier, but they can still use NEG and the usual output modifiers.
This partially reverts 3b99f12a4e "AMDGPU: Remove modifiers from v_div_scale_*".
Differential Revision: https://reviews.llvm.org/D90296
Summary:
This implements a workaround for a hardware bug in gfx8 and gfx9,
where register usage is not estimated correctly for image_store and
image_gather4 instructions when D16 is used.
Change-Id: I4e30744da6796acac53a9b5ad37ac1c2035c8899
Subscribers: arsenm, kzhuravl, jvesely, wdng, nhaehnle, yaxunl, dstuttard, tpr, t-tye, hiraditya, kerbowa, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D81172
Use tablegen generic tables to get the index of image intrinsic
arguments.
Before, the computation of which image intrinsic argument is at which
index was scattered in a few places, tablegen, the SDag instruction
selection and GlobalISel. This patch changes that, so only tablegen
contains code to compute indices and the ImageDimIntrinsicInfo table
provides these information.
Differential Revision: https://reviews.llvm.org/D86270
We have a single noret intrinsic an a lot of special handling
around it. Declare it just as any other but do not define rtn
instructions itself instead.
Differential Revision: https://reviews.llvm.org/D87719
Check for NoNaNsFPMath function attribute in isKnownNeverSNaN.
Function attributes are in held in 'TargetMachine.Options'.
Among other things, this allows selection of some patterns imported
in D87351 since G_FCANONICALIZE is not generated when isKnownNeverSNaN
returns true in lowerFMinNumMaxNum.
However we notice some incorrect results since function attributes are
not correctly written in TargetMachine.Options when next function is
processed. Take a look at @v_test_no_global_nnans_med3_f32_pat0_srcmod0,
it has "no-nans-fp-math"="false" but TargetMachine.Options still has it
set to true since first function in test file had this attribute set to
true. This will be fixed in D87511.
Differential Revision: https://reviews.llvm.org/D87456
Predicates with 'let PredicateCodeUsesOperands = 1' want to examine
matched operands. When we encounter predicate code that uses operands,
analyze its named operand arguments and create a map between argument
index and name. Later, when leaf node with name is encountered, emit
GIM_RecordNamedOperand that will store that operand at its argument
index in operand list. This operand list will be an argument to c++
code of the predicate.
Differential Revision: https://reviews.llvm.org/D87285
If a workgroup size is known to be not greater than wavefront size
the s_barrier instruction is not needed since all threads are guaranteed
to come to the same point at the same time.
This is the same optimization that was implemented for SelectionDAG in
D31731.
Differential Revision: https://reviews.llvm.org/D86609
Fix local ds_read/write_b96/b128 so they can be selected if the alignment
allows. Otherwise, either pick appropriate ds_read2/write2 instructions or break
them down.
Differential Revision: https://reviews.llvm.org/D81638
Previously, it would successfully select and assert if not HSA or PAL
when expanding the pseudoinstruction. We don't need the
pseudoinstruction anymore since we know the total size after
legalization.
The code to determine the value size was overcomplicated and only
correct in the case where the result register already had a register
class assigned. We can always take the size directly from the
register's type.
We may have an SGPR->VGPR copy if a totally uniform pointer
calculation is used for a VGPR pointer operand.
Also hack around a bug in MUBUF matching which would incorrectly use
MUBUF for global when flat was requested. This should really be a
predicate on the parent pattern, but the DAG always checked this
manually inside the complex pattern.
This was always set to 0. Use a default value of 0 in this context to
satisfy the instruction definition patterns. We can't unconditionally
use SLC with a default value of 0 due to limitations in TableGen's
handling of defaulted operands when followed by non-default operands.
This was trying to constrain a physical register. By the verifier's
understanding, it's impossible to have a 1-bit copy to vcc/vcc_lo so
don't try to handle physregs.
There were various hacks used to try to avoid making s1 SGPR vs. s1
VCC ambiguous after constraining the register before we had a strategy
to deal with this. This also attempted to handle undef operands, which
are now illegal gMIR.
We are using undef on the indirect move source subreg and then
using implicit super-reg. This creates a problem in RA when
Greedy decides to split the register. It reassigns the implicit
super-reg but does not bother to change undef source because
it is really does not matter. The fix is to stop lying to RA and
drop undef flag.
This has also hit a problem in SIFoldOperands as it can fold
immediate into an indirect move since there is no undef flag
anymore. That results in multiple test failures, so added the
check for this case.
Differential Revision: https://reviews.llvm.org/D84899
The hardware has created a real mess in the naming for add/sub, which
have been renamed basically every generation. Switch the carry out
pseudos to have the gfx9/gfx10 names. We were using the original SI/CI
v_add_i32/v_sub_i32 names. Later targets reintroduced these names as
carryless instructions with a saturating clamp bit, which we do not
define. Do this rename so we can unambiguously add these missing
instructions.
The carry-in versions should also be renamed, but at least those had a
consistent _u32 name to begin with. The 16-bit instructions were also
renamed, but aren't ambiguous.
This does regress assembler error message quality in some cases. In
mismatched wave32/wave64 situations, this will switch from
"unsupported instruction" to "invalid operand", with the error
pointing at the wrong position. I couldn't quite follow how the
assembler selects these, but the previous behavior seemed accidental
to me. It looked like there was a partial attempt to handle this which
was never completed (i.e. there is an AMDGPUOperand::isBoolReg but it
isn't used for anything).
Select into corresponding V_CMP instruction based on CmpInst predicate,
stored as immediate, in last operand.
Differential Revision: https://reviews.llvm.org/D82652
serge-sans-paille