The refactoring patch for the option completion broke the completion
for ambiguous long options. As this feature was also untested (as
testing ambiguous options with the current test methods is impossible),
I just noticed now. This patch restores the old behavior and adds a
test for this feature.
llvm-svn: 370185
Otherwise dotest doesn't run the test and just lets it always pass.
Also update the comment to explain that we do directory and not
file completion.
llvm-svn: 370047
On the command line we usually insert a space after a completion to indicate that
the completion was successful. After the completion API refactoring, this also
happens with directories which essentially breaks file path completion (as
adding a space terminates the path and starts a new arg). This patch restores the old
behavior by again allowing partial completions. Also extends the iohandler
and SB API tests as the implementation for this is different in Editline
and SB API.
llvm-svn: 370043
Today I discovered the skipLongRunningTest decorator and to my surprise
all the tests were passing without the decorator. They don't seem to be
that expensive either, they take a few seconds but we have tests that
take much longer than that. As such I propose to remove the decorator
and enable them by default.
Differential revision: https://reviews.llvm.org/D66774
llvm-svn: 369995
the platform in the setUp/tearDown methods. I want to migrate the
re-instatement of the correct plaform to the setUp base method but
haven't had time to look at that yet, so I want to land this handful
of fixes until I get to it.
Differential revision: https://reviews.llvm.org/D66331
llvm-svn: 369484
Summary:
The test for conditional breakpoints on Windows was skipped because
there was no expression evaluation support at the time it was written.
After removing the annotation and testing it again, the test is passing.
http://lists.llvm.org/pipermail/lldb-dev/2019-August/015405.html
Signed-off-by: Med Ismail Bennani <medismail.bennani@gmail.com>
Reviewers: stella.stamenova, jingham
Subscribers: lldb-commits
Tags: #lldb
Differential Revision: https://reviews.llvm.org/D66499
llvm-svn: 369453
These tests are mostly trying to reach the different completion functions
in CommandCompletions.cpp (::ArchitectureNames, ::DiskFiles, ::Modules).
llvm-svn: 369249
There was a little bit of logic in the StopInfoBreakpoint::PerformAction
that would null out the StopInfo once we had a completed plan so that the
next call to GetStopInfo would replace it with the StopInfoThreadPlan.
But the stop-hooks check for whether a thread stopped for a reason didn't
trigger this conversion. So I added an API to do that directly, and then
called it where before we just reset the StopInfo.
<rdar://problem/54270767>
Differential Revision: https://reviews.llvm.org/D66241
llvm-svn: 369052
Summary: We have been seeing increased reports of performance issue around large project and formatting std::function variables especially in functions signatures in back traces. There are some possible fixes but exploring those fixes may take time and it is better to temporarily disable the formatter due to its impact and re-enable it once we have a fix.
Differential Revision: https://reviews.llvm.org/D65666
llvm-svn: 367701
For security reasons, DYLD_INSERT_LIBRARIES is not propagated to a child
process. This breaks the skipIfSanitized decorator, which checks for the
environment variable being set. Instead, always set the ASAN_OPTIONS and
make the decorator check for that.
Differential revision: https://reviews.llvm.org/D65594
llvm-svn: 367595
This test was frequently hanging on Windows, causing a timeout after
10 minutes. The short delay (100 microsecond) in the sample program
could cause a deadlock in the Windows thread pool, as I've explained
in the test program's comments.
Now that it doesn't hang, it passes reliably, so I've removed the
Windows-specific XFAIL.
I've tried to clarify the comments in TestThreadSpecificGBreakpoint.py
by eliminating some redundancy and typos, and I simplified away a
couple unnecessary assignments.
Differential Revision: https://reviews.llvm.org/D65546
llvm-svn: 367573
I was going through some of the old bugs and came across PR21069 which I
was able to reproduce. The issue is that we match the regex `^foo`
against the `DW_AT_name` in the DWARF, which for our anonymous function
is indeed `foo`. However, when we get the function name from the symbol
context, the result is `(anonymous namespace)::foo()`. This throws off
completions, which assumes that it's appending to whatever is already
present on the input, resulting in a bogus
`b fooonymous\ namespace)::foo()`.
Bug report: https://llvm.org/PR21069
Differential revision: https://reviews.llvm.org/D65498
llvm-svn: 367455
Summary:
This doubles the 3 tests running right now on linux by also executing each test with libraries-svr4 enabled.
Not sure if there's a better way to do this as I had to copy/paste all the decorators as well...
Reviewers: labath, clayborg, xiaobai
Reviewed By: labath
Subscribers: srhines, lldb-commits
Tags: #lldb
Differential Revision: https://reviews.llvm.org/D65129
llvm-svn: 367247
rL357954 did increase `packet-timeout` 1sec -> 5secs. Which is IMO about the
maximum timeout reasonable for regular use. But for testsuite I think the
timeout should be higher as the testsuite runs in parallel and it can be run
even on slow hosts and with other load (moreover if it runs on some slow arch).
I have chosen 60 secs, that should be enough hopefully. Larger value could
make debugging with hanging `lldb-server` annoying.
This patch was based on this testsuite timeout:
http://lab.llvm.org:8014/builders/lldb-x86_64-fedora/builds/546/steps/test/logs/stdio
FAIL: test_connect (TestGDBRemoteClient.TestGDBRemoteClient)
Test connecting to a remote gdb server
----------------------------------------------------------------------
Traceback (most recent call last):
File "/home/jkratoch/slave-lldb-x86_64-fedora/lldb-x86_64-fedora/llvm/tools/lldb/packages/Python/lldbsuite/test/functionalities/gdb_remote_client/TestGDBRemoteClient.py", line 13, in test_connect
process = self.connect(target)
File "/home/jkratoch/slave-lldb-x86_64-fedora/lldb-x86_64-fedora/llvm/tools/lldb/packages/Python/lldbsuite/test/functionalities/gdb_remote_client/gdbclientutils.py", line 480, in connect
self.assertTrue(error.Success(), error.description)
AssertionError: False is not True : failed to get reply to handshake packet
Differential Revision: https://reviews.llvm.org/D65271
llvm-svn: 367234
We noticed that TestInferiorCrashing.py and TestRecursiveInferior.py are
the second and third slowest tests in the test suite. Splitting them up
allows lit to schedule them more effectively.
llvm-svn: 367077
Mark the process as stopped when SIGSTOP arrives. This is necessary
for lldb-server to generate correct response to 'process interrupt',
and therefore to prevent the whole stack crashing when process
is stopped.
Thanks to Pavel Labath for the tip.
Differential Revision: https://reviews.llvm.org/D65289
llvm-svn: 367047
Summary:
Due to a logic error, lldb-server ended up asserting/crashing every time
the debugged process attempted an execve(). This fixes the error, and
extends TestExec to work on other platforms too. The "extension"
consists of avoiding non-standard posix_spawn extensions and using the
classic execve() call, which should be available on any platform that
actually supports re-execing. I change the test decorator from
@skipUnlessDarwin to @skipIfWindows.
Reviewers: clayborg, jasonmolenda
Subscribers: lldb-commits
Differential Revision: https://reviews.llvm.org/D65207
llvm-svn: 366985
Summary: update some test decorates that can actually pass on andriod aarch64
Patch by Wanyi Ye <kusmour@gmail.com>
Differential Revision: https://reviews.llvm.org/D64767
llvm-svn: 366858
Summary:
Add __kernel_rt_sigreturn to the list of trap handlers for Linux (it's
used as such on aarch64 at least), and __restore_rt as well (used on
x86_64).
Skip decrement-and-recompute for trap handlers in
InitializeNonZerothFrame, as signal dispatch may point the child frame's
return address to the start of the return trampoline.
Parse the 'S' flag for signal handlers from eh_frame augmentation, and
propagate it to the unwind plan.
Reviewers: labath, jankratochvil, compnerd, jfb, jasonmolenda
Reviewed By: jasonmolenda
Subscribers: clayborg, MaskRay, wuzish, nemanjai, kbarton, jrtc27, atanasyan, jsji, javed.absar, kristof.beyls, lldb-commits
Tags: #lldb
Differential Revision: https://reviews.llvm.org/D63667
llvm-svn: 366580
Summary:
It seems that calling Popen can return to the caller before the started process has read all the needed information
from its executable. This means that in case we delete the executable while the process is still starting up,
this test will create a zombie process which in turn leads to a failing test. On my macOS system this happens quite frequently.
This patch fixes this by letting the test synchronize with the inferior after it has started up.
Reviewers: davide
Reviewed By: davide
Subscribers: labath, friss, lldb-commits
Tags: #lldb
Differential Revision: https://reviews.llvm.org/D64546
llvm-svn: 365813
This test was originally marked as expected failure on Windows, but it is timing out instead of outright failing now. The expectedFailure attribute does not correctly track timeouts (as in, they don't count as failures), so now this is causing the test suite to fail.
llvm-svn: 365527
It looks like when this test was added, it was based on TestBreakAfterJoin and it ended up with the same class name. This is an issue because the logs associated with the tests use the class name as the identifier for the file and if two tests have the same name their logs overwrite each other. On non-windows, this just means we lose one of the logs, but on Windows this means that one of the tests will fail occasionally because the file are locked by the other test.
llvm-svn: 364826
Set global enable bits (i.e. bits 1, 3, 5, 7) to enable watchpoints
on NetBSD rather than the local enable bits (0, 2, 4, 6). The former
are necessary for watchpoints to be correctly recognized by the NetBSD
kernel. The latter cause them to be reported as trace points.
Differential Revision: https://reviews.llvm.org/D63792
llvm-svn: 364781
on a thread. When talking to some older gdb-remote stubs, We were getting
a stop reason from the stop reply packet and setting it on the relevant
thread before we updated the full stop list. That would get discarded when
the full list was updated.
Also, if you already have a thread list when you go to see if there is an
Operating System plugin, and you do indeed load a new OS plugin, you have to
re-fetch the thread list or it will only show the raw threads.
Differential Revision: https://reviews.llvm.org/D62887
llvm-svn: 364666
The qemu x86_64 target returns a target.xml register definition file which
includes other xml files and they include others, etc. Also, the registers
are not put in register groups like lldb wants to see.
This patch (1) puts registers that aren't in a register group in a "general"
register group, (2) change ProcessGDBRemote::GetGDBServerRegisterInfo to
be a method that starts the parsing, asking a recurisve function to fetch
and parse target.xml, (3) adds
ProcessGDBRemote::GetGDBServerRegisterInfoXMLAndProcess which can recusively
call itself to read and parse included xml files, (4) in addition to expecting
the top-level <target> element (which only happens in the top level xml file),
also an xml file that consists of a <feature> node - read the register
defintions and includes from that <feature> element.
<rdar://problem/49537922>
Differential revision: https://reviews.llvm.org/D63802
llvm-svn: 364484
Add a function to flatten the nested aggregate type
Differential Revision: https://reviews.llvm.org/D62702
Patch by Wanyi Ye <kusmour@gmail.com>
llvm-svn: 362543
Replace checked-in minidumps with their yaml forms now that yaml2obj
supports the ThreadList stream. I delete the test_modules_in_mini_dump
test altogether as this functionality is covered more systematically in
TestMinidumpUUID.py.
llvm-svn: 360655
logging when the testsuite is run with trace mode enabled are leaving
the logging enabled after the tests have finished. That state
isn't cleared in a --no-multiprocess testsuite run.
llvm-svn: 360480
This can cause us to return paths to files on the local filesystem even
if we don't end up using that file (for instance because the file is not
a real module).
llvm-svn: 360432
While this fixed the windows bot failures, it also broke all other bots.
Upon closer inspection, it turns out that the windows bots were "broken"
because two tests were unexpectedly passing -- i.e., the original patch
(r360375) actually improved our stepping support on windows.
So instead, I remove the relevant XFAILs.
This reverts commit r360397.
llvm-svn: 360407
Currently when we single step over a source line, we run and stop at every branch in the source line range. We can reduce the number of times we stop when stepping over by figuring out if any of these branches are function calls, and if so, ignore these branches. Since we are stepping over we can safely ignore these calls since they will return to the next instruction. Currently the step logic would stop at those branches (1st stop), single step into the branch (2nd stop), and then set a breakpoint at the return address (3rd stop), and then continue.
Differential Revision: https://reviews.llvm.org/D58678
llvm-svn: 360375
Raphael Isemann