We were bailing to two places if our runtime checks failed. If the initial overflow check failed, we'd go to ScalarPH. If any other check failed, we'd go to MiddleBlock. This caused us to have to have an extra PHI per induction and reduction as the vector loop's exit block was not dominated by its latch.
There's no need to have this behavior - if we just always go to ScalarPH we can get rid of a bunch of complexity.
llvm-svn: 246637
This reduces the complexity of createEmptyBlock() and will open the door to further refactoring.
The test change is simply because we're now constant folding a trivial test.
llvm-svn: 246634
There's no need to widen canonical induction variables. It's just as efficient to create a *new*, wide, induction variable.
Consider, if we widen an indvar, then we'll have to truncate it before its uses anyway (1 trunc). If we create a new indvar instead, we'll have to truncate that instead (1 trunc) [besides which IndVars should go and clean up our mess after us anyway on principle].
This lets us remove a ton of special-casing code.
llvm-svn: 246631
Vectorized loops only ever have one induction variable. All induction PHIs from the scalar loop are rewritten to be in terms of this single indvar.
We were trying very hard to pick an indvar that already existed, even if that indvar wasn't canonical (didn't start at zero). But trying so hard is really fruitless - creating a new, canonical, indvar only results in one extra add in the worst case and that add is trivially easy to push through the PHI out of the loop by instcombine.
If we try and be less clever here and instead let instcombine clean up our mess (as we do in many other places in LV), we can remove unneeded complexity.
llvm-svn: 246630
Vector 'getelementptr' with scalar base is an opportunity for gather/scatter intrinsic to generate a better sequence.
While looking for uniform base, we want to use the scalar base pointer of GEP, if exists.
Differential Revision: http://reviews.llvm.org/D11121
llvm-svn: 246622
The MS incremental linker seems to inspect the timestamp written into
the object file to determine whether or not it's contents need to be
considered. Failing to set the timestamp to a date newer than the
executable will result in the object file not participating in
subsequent links. To ameliorate this, write the current time into the
object file's TimeDateStamp field.
llvm-svn: 246607
The code introduced in r244314 assumed that EXTRACT_VECTOR_ELT only
takes constant indices, but it does accept variables.
Bail out for those: we can't use them, as the shuffles we want to
reconstruct do require constant masks.
llvm-svn: 246594
COFF sections are accompanied with an auxiliary symbol which includes a
checksum. This checksum used to be filled with just zero but this seems
to upset LINK.exe when it is processing a /INCREMENTAL link job.
Instead, fill the CheckSum field with the JamCRC of the section
contents. This matches MSVC's behavior.
This fixes PR19666.
N.B. A rather simple implementation of JamCRC is given. It implements
a byte-wise calculation using the method given by Sarwate. There are
implementations with higher throughput like slice-by-eight and making
use of PCLMULQDQ. We can switch to one of those techniques if it turns
out to be a significant use of time.
llvm-svn: 246590
Parallelism can be enabled using a new plugin option, jobs=N, where N is
the number of code generation threads.
Differential Revision: http://reviews.llvm.org/D12308
llvm-svn: 246584
-only-needed -- link in only symbols needed by destination module
-internalize -- internalize linked symbols
Differential Revision: http://reviews.llvm.org/D12459
llvm-svn: 246561
This matches the ARM behavior. In both cases, the register is part
of the optional Performance Monitors extension, so, add the feature,
and enable it for the A-class processors we support.
Differential Revision: http://reviews.llvm.org/D12425
llvm-svn: 246555
Summary:
This change turns on by default interleaved access vectorization
for AArch64.
We also clean up some tests which were spedifically enabling this
behaviour.
Reviewers: rengolin
Subscribers: aemerson, llvm-commits, rengolin
Differential Revision: http://reviews.llvm.org/D12149
llvm-svn: 246542
Summary:
This change turns on by default interleaved access vectorization on ARM,
as it has shown to be beneficial on ARM.
Reviewers: rengolin
Subscribers: aemerson, llvm-commits, rengolin
Differential Revision: http://reviews.llvm.org/D12146
llvm-svn: 246541
Summary:
Interleaved access lowering removes a memory operation and a
sequence of vector shuffles and replaces it with a series of
memory operations. This should be always beneficial.
This pass in only enabled on ARM/AArch64.
Reviewers: rengolin
Subscribers: aemerson, llvm-commits, rengolin
Differential Revision: http://reviews.llvm.org/D12145
llvm-svn: 246540
Currently, when edge weights are assigned to edges that are created when lowering switch statement, the weight on the edge to default statement (let's call it "default weight" here) is not considered. We need to distribute this weight properly. However, without value profiling, we have no idea how to distribute it. In this patch, I applied the heuristic that this weight is evenly distributed to successors.
For example, given a switch statement with cases 1,2,3,5,10,11,20, and every edge from switch to each successor has weight 10. If there is a binary search tree built to test if n < 10, then its two out-edges will have weight 4x10+10/2 = 45 and 3x10 + 10/2 = 35 respectively (currently they are 40 and 30 without considering the default weight). Each distribution (which is 5 here) will be stored in each SwitchWorkListItem for further distribution.
There are some exceptions:
For a jump table header which doesn't have any edge to default statement, we don't distribute the default weight to it.
For a bit test header which covers a contiguous range and hence has no edges to default statement, we don't distribute the default weight to it.
When the branch checks a single value or a contiguous range with no edge to default statement, we don't distribute the default weight to it.
In other cases, the default weight is evenly distributed to successors.
Differential Revision: http://reviews.llvm.org/D12418
llvm-svn: 246522
SETCC is one of those special node types for which operation actions (legality,
etc.) is keyed off of an operand type, not the node's value type. This makes
sense because the value type of a legal SETCC node is determined by its
operands' value type (via the TLI function getSetCCResultType). When the
SDAGBuilder creates SETCC nodes, it either creates them with an MVT::i1 value
type, or directly with the value type provided by TLI.getSetCCResultType.
The first problem being fixed here is that DAGCombine had several places
querying TLI.isOperationLegal on SETCC, but providing the return of
getSetCCResultType, instead of the operand type directly. This does not mean
what the author thought, and "luckily", most in-tree targets have SETCC with
Custom lowering, instead of marking them Legal, so these checks return false
anyway.
The second problem being fixed here is that two of the DAGCombines could create
SETCC nodes with arbitrary (integer) value types; specifically, those that
would simplify:
(setcc a, b, op1) and|or (setcc a, b, op2) -> setcc a, b, op3
(which is possible for some combinations of (op1, op2))
If the operands of the and|or node are actual setcc nodes, then this is not an
issue (because the and|or must share the same type), but, the relevant code in
DAGCombiner::visitANDLike and DAGCombiner::visitORLike actually calls
DAGCombiner::isSetCCEquivalent on each operand, and that function will
recognise setcc-like select_cc nodes with other return types. And, thus, when
creating new SETCC nodes, we need to be careful to respect the value-type
constraint. This is even true before type legalization, because it is quite
possible for the SELECT_CC node to have a legal type that does not happen to
match the corresponding TLI.getSetCCResultType type.
To be explicit, there is nothing that later fixes the value types of SETCC
nodes (if the type is legal, but does not happen to match
TLI.getSetCCResultType). Creating SETCCs with an MVT::i1 value type seems to
work only because, either MVT::i1 is not legal, or it is what
TLI.getSetCCResultType returns if it is legal. Fixing that is a larger change,
however. For the time being, restrict the relevant transformations to produce
only SETCC nodes with a value type matching TLI.getSetCCResultType (or MVT::i1
prior to type legalization).
Fixes PR24636.
llvm-svn: 246507
Hopefully this will end the GEPs saga!
This commit reverts r245394, i.e., it reapplies r221876 while incorporating the
fixes from D11847.
r221876 was not reapplied alone because it was not safe and D11847 was not
applied alone because it needs r221876 to produce correct results.
This should fix PR24596.
Original commit message for r221876:
Let's try this again...
This reverts r219432, plus a bug fix.
Description of the bug in r219432 (by Nick):
The bug was using AllPositive to break out of the loop; if the loop break
condition i != e is changed to i != e && AllPositive then the
test_modulo_analysis_with_global test I've added will fail as the Modulo will
be calculated incorrectly (as the last loop iteration is skipped, so Modulo
isn't updated with its Scale).
Nick also adds this comment:
ComputeSignBit is safe to use in loops as it takes into account phi nodes, and
the == EK_ZeroEx check is safe in loops as, no matter how the variable changes
between iterations, zero-extensions will always guarantee a zero sign bit. The
isValueEqualInPotentialCycles check is therefore definitely not needed as all
the variable analysis holds no matter how the variables change between loop
iterations.
And this patch also adds another enhancement to GetLinearExpression - basically
to convert ConstantInts to Offsets (see test_const_eval and
test_const_eval_scaled for the situations this improves).
Original commit message:
This reverts r218944, which reverted r218714, plus a bug fix.
Description of the bug in r218714 (by Nick):
The original patch forgot to check if the Scale in VariableGEPIndex flipped the
sign of the variable. The BasicAA pass iterates over the instructions in the
order they appear in the function, and so BasicAliasAnalysis::aliasGEP is
called with the variable it first comes across as parameter GEP1. Adding a
%reorder label puts the definition of %a after %b so aliasGEP is called with %b
as the first parameter and %a as the second. aliasGEP later calculates that %a
== %b + 1 - %idxprom where %idxprom >= 0 (if %a was passed as the first
parameter it would calculate %b == %a - 1 + %idxprom where %idxprom >= 0) -
ignoring that %idxprom is scaled by -1 here lead the patch to incorrectly
conclude that %a > %b.
Revised patch by Nick White, thanks! Thanks to Lang to isolating the bug.
Slightly modified by me to add an early exit from the loop and avoid
unnecessary, but expensive, function calls.
Original commit message:
Two related things:
1. Fixes a bug when calculating the offset in GetLinearExpression. The code
previously used zext to extend the offset, so negative offsets were converted
to large positive ones.
2. Enhance aliasGEP to deduce that, if the difference between two GEP
allocations is positive and all the variables that govern the offset are also
positive (i.e. the offset is strictly after the higher base pointer), then
locations that fit in the gap between the two base pointers are NoAlias.
Patch by Nick White!
Message from D11847:
Un-revert of r241981 and fix for PR23626. The 'Or' case of GetLinearExpression
delegates to 'Add' if possible, and if not it returns an Opaque value.
Unfortunately the Scale and Offsets weren't being set (and so defaulted to 0) -
and a scale of zero effectively removes the variable from the GEP instruction.
This meant that BasicAA would return MustAliases when it should have been
returning PartialAliases (and PR23626 was an example of the GVN pass using an
incorrect MustAlias to merge loads from what should have been different
pointers).
Differential Revision: http://reviews.llvm.org/D11847
Patch by Nick White <n.j.white@gmail.com>!
llvm-svn: 246502
Summary: This handles all load/store operations that WebAssembly defines, and handles those necessary for C++ such as i1. I left a FIXME for outstanding features which aren't required for now.
Reviewers: sunfish
Subscribers: jfb, llvm-commits, dschuff
llvm-svn: 246500
Also delete and simplify a lot of MachineModuleInfo code that used to be
needed to handle personalities on landingpads. Now that the personality
is on the LLVM Function, we no longer need to track it this way on MMI.
Certainly it should not live on LandingPadInfo.
llvm-svn: 246478
Teach FunctionAttr to infer the nonnull attribute on return values of functions which never return a potentially null value. This is done both via a conservative local analysis for the function itself and a optimistic per-SCC analysis. If no function in the SCC returns anything which could be null (other than values from other functions in the SCC), we can conclude no function returned a null pointer. Even if some function within the SCC returns a null pointer, we may be able to locally conclude that some don't.
Differential Revision: http://reviews.llvm.org/D9688
llvm-svn: 246476
If asked to prove a predicate about a value produced by a PHI node, LazyValueInfo was unable to do so even if the predicate was known to be true for each input to the PHI. This prevented JumpThreading from eliminating a provably redundant branch.
The problematic test case looks something like this:
ListNode *p = ...;
while (p != null) {
if (!p) return;
x = g->x; // unrelated
p = p->next
}
The null check at the top of the loop is redundant since the value of 'p' is null checked on entry to the loop and before executing the backedge. This resulted in us a) executing an extra null check per iteration and b) not being able to LICM unrelated loads after the check since we couldn't prove they would execute or that their dereferenceability wasn't effected by the null check on the first iteration.
Differential Revision: http://reviews.llvm.org/D12383
llvm-svn: 246465
The ISelLowering code turned insertion turned the element for the
lowest lane of a BUILD_VECTOR into an INSERT_SUBREG, this prohibited
the patterns for SCALAR_TO_VECTOR(Load) to match later. Restrict this
to cases without a load argument.
Reported in rdar://22223823
Differential Revision: http://reviews.llvm.org/D12467
llvm-svn: 246462
Summary:
Constant vectors weren't allowed to have an i1 condition in the
BitcodeReader. Make sure we have the same restrictions that are
documented, not more.
Reviewers: nlewycky, rafael, kschimpf
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D12440
llvm-svn: 246459
Avoid marking some MCSymbols as used in MC/AsmParser.cpp when no uses
exist. This fixes a bug in parseAssignmentExpression() which
inadvertently sets IsUsed, thereby triggering:
"invalid re-assignment of non-absolute variable"
on otherwise valid code. No other functionality change intended.
The original version of this patch touched many calls to MCSymbol
accessors. On rafael's advice, I have stripped this patch down a bit.
As a follow-up, I intend to find the call sites which intentionally set
IsUsed and force them to do so explicitly.
Differential Revision: http://reviews.llvm.org/D12347
llvm-svn: 246457
AggressiveAntiDepBreaker was doing some EarlyClobber checking, but was not
checking that the register being potentially renamed was defined by an
early-clobber def where there was also a use, in that instruction, of the
register being considered as the target of the rename. Fixes PR24014.
llvm-svn: 246423
Summary:
If run with other locales (like French),
the decode operation might fail
Reviewers: rafael
Differential Revision: http://reviews.llvm.org/D12432
llvm-svn: 246421
Summary:
JumpThreading shouldn't duplicate a convergent call, because that would move a convergent call into a control-inequivalent location. For example,
if (cond) {
...
} else {
...
}
convergent_call();
if (cond) {
...
} else {
...
}
should not be optimized to
if (cond) {
...
convergent_call();
...
} else {
...
convergent_call();
...
}
Test Plan: test/Transforms/JumpThreading/basic.ll
Patch by Xuetian Weng.
Reviewers: resistor, arsenm, jingyue
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D12484
llvm-svn: 246415
This testcase required 2 copies of the same file, and the second
copy was missing. It was currently working because of a bug I'm
about to fix.
llvm-svn: 246411
The fix is trivial (The actual patch is 2 lines, but as it changes
indentation it looks like more).
clang does not produce this kind of (slightly bogus) debug info
anymore, thus I had to rely on a hand-crafted assembly test to trigger
that case.
llvm-svn: 246410
The value of an inlined subprogram low_pc attribute should not
get relocated, but it can happen that it matches the enclosing
function's start address and thus gets the generic treatment.
Special case it to avoid applying the PC offset twice.
llvm-svn: 246406
There were really two problems here. The first was that we had the truth tables
for signed i1 comparisons backward. I imagine these are not very common, but if
you have:
setcc i1 x, y, LT
this has the '0 1' and the '1 0' results flipped compared to:
setcc i1 x, y, ULT
because, in the signed case, '1 0' is really '-1 0', and the answer is not the
same as in the unsigned case.
The second problem was that we did not have patterns (at all) for the unsigned
comparisons select_cc nodes for i1 comparison operands. This was the specific
cause of PR24552. These had to be added (and a missing Altivec promotion added
as well) to make sure these function for all types. I've added a bunch more
test cases for these patterns, and there are a few FIXMEs in the test case
regarding code-quality.
Fixes PR24552.
llvm-svn: 246400
Add support for MIR serialization of PowerPC-specific operand target flags
(based on the generic infrastructure added in r244185 and r245383).
I won't even pretend that this is good test coverage, but this includes the
regression test associated with r246372. Adding an MIR test for that fix is far
superior to adding an IR-level test because particular instruction-scheduling
decisions are necessary in order to expose the bug, and using an MIR test we
can start the pipeline post-scheduling.
llvm-svn: 246373
This is especially visible in softfp mode, for example in the implementation of libm fabs/fneg functions. If we have:
%1 = vmovdrr r0, r1
%2 = fabs %1
then move the fabs before the vmovdrr:
%1 = and r1, #0x7FFFFFFF
%2 = vmovdrr r0, r1
This is never a lose, and could be a serious win because the vmovdrr may be followed by a vmovrrd, which would enable us to remove the conversion into FPRs completely.
We already do this for f32, but not for f64. Tests are added for both.
llvm-svn: 246360
The VOP3 encoding of these allows any SGPR pair for the i1
output, but this was forced before to always use vcc.
This doesn't yet try to use this, but does add the operand
to the definitions so the main change is adding vcc to the
output of the VOP2 encoding.
llvm-svn: 246358
Without a memory operand, mayLoad or mayStore instructions
are treated as hasUnorderedMemRef, which results in much worse
scheduling.
We really should have a verifier check that any
non-side effecting mayLoad or mayStore has a memory operand.
There are a few instructions (interp and images) which I'm
not sure what / where to add these.
llvm-svn: 246356
I'm working on adding !dbg attachments to functions (PR23367), which
we'll use to determine the canonical subprogram for a function (instead
of the `subprograms:` array in the compile units). This updates a few
old tests in preparation.
Transforms/Mem2Reg/ConvertDebugInfo2.ll had an old-style grep+count
based test that would start to fail because I've added an extra line
with `!dbg`. Instead, explicitly `CHECK` for what I think the test
actually cares about.
All three testcases have subprograms with a valid `function:` reference
-- which means my upgrade script will add a `!dbg` attachment -- but
that aren't referenced from any compile unit. I suspect these testcases
were handreduced over-zealously (or have bitrotted?). Add a reference
from the compile unit so that upcoming Verifier checks won't fail here.
llvm-svn: 246351
Add `Function::setSubprogram()` and `Function::getSubprogram()`,
convenience methods to forward to `setMetadata()` and `getMetadata()`,
respectively, and deal in `DISubprogram` instead of `MDNode`.
Also add a verifier check to enforce that `!dbg` attachments are always
subprograms.
Originally (when I had the llvm-dev discussion back in April) I thought
I'd store a pointer directly on `llvm::Function` for these attachments
-- we frequently have debug info, and that's much cheaper than using map
in the context if there are no other function-level attachments -- but
for now I'm just using the generic infrastructure. Let's add the extra
complexity only if this shows up in a profile.
llvm-svn: 246339
Currently the DWARF backend requires that subprograms have a type, and
the type is ignored if it has an empty type array. The long term
direction here -- see PR23079 -- is instead to skip the type entirely if
there's no valid type.
It turns out we have cases in tree of missing types on subprograms, but
since they're not referenced by compile units, the backend never crashes
on them. One option would be to add a Verifier check that subprograms
have types, and fix the bitrot. However, this is a fair bit of churn
(20-30 testcases) that would be reversed anyway by PR23079.
I found this inconsistency because of a WIP patch and upgrade script for
PR23367 that started crashing on test/DebugInfo/2010-10-01-crash.ll.
This commit updates the testcase to reference the subprogram from the
compile unit, and fixes the resulting crash (in line with the direction
of PR23079). This also updates `DIBuilder` to stop assuming a non-null
pointer for the subroutine types.
llvm-svn: 246333
This reverts isSafeToSpeculativelyExecute's use of ReadNone until we
split ReadNone into two pieces: one attribute which reasons about how
the function reasons about memory and another attribute which determines
how it may be speculated, CSE'd, trap, etc.
llvm-svn: 246331
As a follow-up to r246098, require `DISubprogram` definitions
(`isDefinition: true`) to be 'distinct'. Specifically, add an assembler
check, a verifier check, and bitcode upgrading logic to combat testcase
bitrot after the `DIBuilder` change.
While working on the testcases, I realized that
test/Linker/subprogram-linkonce-weak-odr.ll isn't relevant anymore. Its
purpose was to check for a corner case in PR22792 where two subprogram
definitions match exactly and share the same metadata node. The new
verifier check, requiring that subprogram definitions are 'distinct',
precludes that possibility.
I updated almost all the IR with the following script:
git grep -l -E -e '= !DISubprogram\(.* isDefinition: true' |
grep -v test/Bitcode |
xargs sed -i '' -e 's/= \(!DISubprogram(.*, isDefinition: true\)/= distinct \1/'
Likely some variant of would work for out-of-tree testcases.
llvm-svn: 246327
PR24605 is caused due to an incorrect insert point in instcombine's IR
builder. When simplifying
%t = add X Y
...
%m = icmp ... %t
the replacement for %t should be placed before %t, not before %m, as
there could be a use of %t between %t and %m.
llvm-svn: 246315
This patch adds a test for MIPS64R6 relocations, it corrects check
expressions for R_MIPS_26 and R_MIPS_PC16 relocations in MIPS64R2 test, and
it adds run for big endian in MIPS64R2 test.
Patch by Vladimir Radosavljevic.
Differential Revision: http://reviews.llvm.org/D11217
llvm-svn: 246311
This has been causing the prologue_end to be incorrectly positioned.
Patch by Vladimir Radosavljevic.
Differential Revision: http://reviews.llvm.org/D11293
llvm-svn: 246309
When combiner AA is enabled, look at stores on the same chain.
Non-aliasing stores are moved to the same chain so the existing
code fails because it expects to find an adajcent store on a consecutive
chain.
Because of how DAGCombiner tries these store combines,
MergeConsecutiveStores doesn't see the correct set of stores on the chain
when it visits the other stores. Each store individually has its chain
fixed before trying to merge consecutive stores, and then tries to merge
stores from that point before the other stores have been processed to
have their chains fixed. To fix this, attempt to use FindBetterChain
on any possibly neighboring stores in visitSTORE.
Suppose you have 4 32-bit stores that should be merged into 1 vector
store. One store would be visited first, fixing the chain. What happens is
because not all of the store chains have yet been fixed, 2 of the stores
are merged. The other 2 stores later have their chains fixed,
but because the other stores were already merged, they have different
memory types and merging the two different sized stores is not
supported and would be more difficult to handle.
llvm-svn: 246307
Summary:
This patch removes two remaining places where pointer value comparisons
are used to order functions: comparing range annotation metadata, and comparing
block address constants. (These are both rare cases, and so no actual
non-determinism was observed from either case).
The fix for range metadata is simple: the annotation always consists of a pair
of integers, so we just order by those integers.
The fix for block addresses is more subtle. Two constants are the same if they
are the same basic block in the same function, or if they refer to corresponding
basic blocks in each respective function. Note that in the first case, merging
is trivially correct. In the second, the correctness of merging relies on the
fact that the the values of block addresses cannot be compared. This change is
actually an enhancement, as these functions could not previously be merged (see
merge-block-address.ll).
There is still a problem with cross function block addresses, in that constants
pointing to a basic block in a merged function is not updated.
This also more robustly compares floating point constants by all fields of their
semantics, and fixes a dyn_cast/cast mixup.
Author: jrkoenig
Reviewers: dschuff, nlewycky, jfb
Subscribers llvm-commits
Differential revision: http://reviews.llvm.org/D12376
llvm-svn: 246305
handle more allocas with loads past the end of the alloca.
I suspect there are some related crashers with slightly different
patterns, but I'll fix those and add test cases as I find them.
Thanks to David Majnemer for the excellent test case reduction here.
Made this super simple to debug and fix.
llvm-svn: 246289
This patch includes a fix for a llvm-readobj test. With this patch,
the tool does no longer print out COFF headers for the short import
file, but that's probably desirable because the header for the short
import file is dummy.
llvm-svn: 246283
COFF short import files are special kind of files that contains only
DLL-exported symbol names. That's different from object files because
it has no data except symbol names.
This change implements a SymbolicFile interface for the short import
files so that symbol names can be accessed through that interface.
llvm-ar is now able to read the file and create symbol table entries
for short import files.
llvm-svn: 246276
Summary:
Change the coloring algorithm in WinEHPrepare to visit a funclet's exits
in its parents' contexts and so properly classify the continuations of
nested funclets.
Also change the placement of cloned blocks to be deterministic and to
maintain the relative order of each funclet's blocks.
Add a lit test showing various patterns that require cloning, the last
several of which don't have CHECKs yet because they require cloning
entire funclets which is NYI.
Reviewers: rnk, andrew.w.kaylor, majnemer
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D12353
llvm-svn: 246245
After hitting @llvm.assume(X) we can:
- propagate equality that X == true
- if X is icmp/fcmp (with eq operation), and one of operand
is constant we can change all variables with constants in the same BasicBlock
http://reviews.llvm.org/D11918
llvm-svn: 246243
Prior to this patch, we hadn't been marking StratifiedSets with the
appropriate StratifiedAttrs when handling the result of no-args call
instructions. This caused us to report NoAlias when handed, for
example, an escaped alloca and a result from an opaque function. Now we
properly mark the return value of said functions.
Thanks again to Chandler, Richard, and Nick for pinging me about this.
Differential review: http://reviews.llvm.org/D12408
llvm-svn: 246240
more than 2 instructions.
I introduced this regression a while back and did not noticed it because I
somehow forgot to push the initial test cases for the pass!
Fix that as well!
llvm-svn: 246239
llvm::splitCodeGen is a function that implements the core of parallel LTO
code generation. It uses llvm::SplitModule to split the module into linkable
partitions and spawning one code generation thread per partition. The function
produces multiple object files which can be linked in the usual way.
This has been threaded through to LTOCodeGenerator (and llvm-lto for testing
purposes). Separate patches will add parallel LTO support to the gold plugin
and lld.
Differential Revision: http://reviews.llvm.org/D12260
llvm-svn: 246236
We can now run 32-bit programs with empty catch bodies. The next step
is to change PEI so that we get funclet prologues and epilogues.
llvm-svn: 246235
Any call which is side effect free is trivially OK to speculate. We
already had similar logic in EarlyCSE and GVN but we were missing it
from isSafeToSpeculativelyExecute.
This fixes PR24601.
llvm-svn: 246232
Fixes PR24602: r245689 introduced an unguarded use of
SelectionDAG::FoldConstantArithmetic, which returns 0 when it fails
because of opaque (hoisted) constants.
llvm-svn: 246217
Constant propagation for single precision math functions (such as
tanf) is already working, but was not enabled. This patch enables
these for many single-precision functions, and adds respective test
cases.
Newly handled functions: acosf asinf atanf atan2f ceilf coshf expf
exp2f fabsf floorf fmodf logf log10f powf sinhf tanf tanhf
llvm-svn: 246194
This patch changes the analysis diagnostics produced when loops with
floating-point recurrences or memory operations are identified. The new messages
say "cannot prove it is safe to reorder * operations; allow reordering by
specifying #pragma clang loop vectorize(enable)". Depending on the type of
diagnostic the message will include additional options such as ffast-math or
__restrict__.
This patch also allows the vectorize(enable) pragma to override the low pointer
memory check threshold. When the hint is given a higher threshold is used.
See the clang patch for the options produced for each diagnostic.
llvm-svn: 246187
Constant propagation for single precision math functions (such as
tanf) is already working, but was not enabled. This patch enables
these for many single-precision functions, and adds respective test
cases.
Newly handled functions: acosf asinf atanf atan2f ceilf coshf expf
exp2f fabsf floorf fmodf logf log10f powf sinhf tanf tanhf
llvm-svn: 246186
Constant propagation for single precision math functions (such as
tanf) is already working, but was not enabled. This patch enables
these for many single-precision functions, and adds respective test
cases.
Newly handled functions: acosf asinf atanf atan2f ceilf coshf expf
exp2f fabsf floorf fmodf logf log10f powf sinhf tanf tanhf
llvm-svn: 246158
Unlike scalar operations, we can perform vector operations on element types that
are smaller than the native integer types. We type-promote scalar operations if
they are smaller than a native type (e.g., i8 arithmetic is promoted to i32
arithmetic on Arm targets). This patch detects and removes type-promotions
within the reduction detection framework, enabling the vectorization of small
size reductions.
In the legality phase, we look through the ANDs and extensions that InstCombine
creates during promotion, keeping track of the smaller type. In the
profitability phase, we use the smaller type and ignore the ANDs and extensions
in the cost model. Finally, in the code generation phase, we truncate the result
of the reduction to allow InstCombine to rewrite the entire expression in the
smaller type.
This fixes PR21369.
http://reviews.llvm.org/D12202
Patch by Matt Simpson <mssimpso@codeaurora.org>!
llvm-svn: 246149
Globals in address spaces other than one may have 0 as a valid address,
so we should not assume that they can be null.
Reviewed by Philip Reames.
llvm-svn: 246137
A release fence acts as a publication barrier for stores within the current thread to become visible to other threads which might observe the release fence. It does not require the current thread to observe stores performed on other threads. As a result, we can allow store-load and load-store forwarding across a release fence.
We do need to make sure that stores before the fence can't be eliminated even if there's another store to the same location after the fence. In theory, we could reorder the second store above the fence and *then* eliminate the former, but we can't do this if the stores are on opposite sides of the fence.
Note: While more aggressive then what's there, this patch is still implementing a really conservative ordering. In particular, I'm not trying to exploit undefined behavior via races, or the fact that the LangRef says only 'atomic' accesses are ordered w.r.t. fences.
Differential Revision: http://reviews.llvm.org/D11434
llvm-svn: 246134
When computing base pointers, we introduce new instructions to propagate the base of existing instructions which might not be bases. However, the algorithm doesn't make any effort to recognize when the new instruction to be inserted is the same as an existing one already in the IR. Since this is happening immediately before rewriting, we don't really have a chance to fix it after the pass runs without teaching loop passes about statepoints.
I'm really not thrilled with this patch. I've rewritten it 4 different ways now, but this is the best I've come up with. The case where the new instruction is just the original base defining value could be merged into the existing algorithm with some complexity. The problem is that we might have something like an extractelement from a phi of two vectors. It may be trivially obvious that the base of the 0th element is an existing instruction, but I can't see how to make the algorithm itself figure that out. Thus, I resort to the call to SimplifyInstruction instead.
Note that we can only adjust the instructions we've inserted ourselves. The live sets are still being tracked in side structures at this point in the code. We can't easily muck with instructions which might be in them. Long term, I'm really thinking we need to materialize the live pointer sets explicitly in the IR somehow rather than using side structures to track them.
Differential Revision: http://reviews.llvm.org/D12004
llvm-svn: 246133
This patch ensures that every analysis diagnostic produced by the vectorizer
will be printed if the loop has a vectorization hint on it. The condition has
also been improved to prevent printing when a disabling hint is specified.
llvm-svn: 246132
This is a one-line-change patch that moves the update to UnhandledWeights to the correct position: it should be updated for all clusters instead of just range clusters.
Differential Revision: http://reviews.llvm.org/D12391
llvm-svn: 246129
As Sanjoy pointed out over in http://reviews.llvm.org/D11819, a switch on an icmp should always be able to become a branch instruction. This patch generalizes that notion slightly to prove that the default case of a switch is unreachable if the cases completely cover all possible bit patterns in the condition. Once that's done, the switch to branch conversion kicks in just fine.
Note: Duplicate case values are disallowed by the LangRef and verifier.
Differential Revision: http://reviews.llvm.org/D11995
llvm-svn: 246125
Summary:
Let NVPTX backend detect integer min and max patterns during isel and emit intrinsics that enable hardware support.
Reviewers: jholewinski, meheff, jingyue
Subscribers: arsenm, llvm-commits, meheff, jingyue, eliben, jholewinski
Differential Revision: http://reviews.llvm.org/D12377
llvm-svn: 246107
Currently, when lowering switch statement and a new basic block is built for jump table / bit test header, the edge to this new block is not assigned with a correct weight. This patch collects the edge weight from all its successors and assign this sum of weights to the edge (and also the other fall-through edge). Test cases are adjusted accordingly.
Differential Revision: http://reviews.llvm.org/D12166#fae6eca7
llvm-svn: 246104
Things of note:
- Other linkage types aren't handled yet. We'll figure it out with dynamic linking.
- Special LLVM globals are either ignored, or error out for now.
- TLS isn't supported yet (WebAssembly will have threads later).
- There currently isn't a syntax for alignment, I left it in a comment so it's easy to hook up.
- Undef is convereted to whatever the type's appropriate null value is.
- assert versus report_fatal_error: follow what other AsmPrinters do, and assert only on what should have been caught elsewhere.
llvm-svn: 246092
This was causing problems when some functions use a GuardReg and some
don't as can happen when mixing SelectionDAG and FastISel generated
functions.
llvm-svn: 246075
If you're going to realign %sp to get object alignment properly (which
the code does), and stack offsets and alignments are calculated going
down from %fp (which they are), then the total stack size had better
be a multiple of the alignment. LLVM did indeed ensure that.
And then, after aligning, the sparc frame code added 96 (for sparcv8)
to the frame size, making any requested alignment of 64-bytes or
higher *guaranteed* to be misaligned. The test case added with r245668
even tests this exact scenario, and asserted the incorrect behavior,
which I somehow failed to notice. D'oh.
This change fixes the frame lowering code to align the stack size
*after* adding the spill area, instead.
Differential Revision: http://reviews.llvm.org/D12349
llvm-svn: 246042
This is a fix for disassembling unusual instruction sequences in 64-bit
mode w.r.t the CALL rel16 instruction. It might be desirable to move the
check somewhere else, but it essentially mimics the special case
handling with JCXZ in 16-bit mode.
The current behavior accepts the opcode size prefix and causes the
call's immediate to stop disassembling after 2 bytes. When debugging
sequences of instructions with this pattern, the disassembler output
becomes extremely unreliable and essentially useless (if you jump midway
into what lldb thinks is a unified instruction, you'll lose %rip). So we
ignore the prefix and consume all 4 bytes when disassembling a 64-bit
mode binary.
Note: in Vol. 2A 3-99 the Intel spec states that CALL rel16 is N.S. N.S.
is defined as:
Indicates an instruction syntax that requires an address override
prefix in 64-bit mode and is not supported. Using an address
override prefix in 64-bit mode may result in model-specific
execution behavior. (Vol. 2A 3-7)
Since 0x66 is an operand override prefix we should be OK (although we
may want to warn about 0x67 prefixes to 0xe8). On the CPUs I tested
with, they all ignore the 0x66 prefix in 64-bit mode.
Patch by Matthew Barney!
Differential Revision: http://reviews.llvm.org/D9573
llvm-svn: 246038
This was only added to preserve the old ScalarRepl's use of SSAUpdater
which was originally to avoid use of dominance frontiers. Now, we only
need a domtree, and we'll need a domtree right after this pass as well
and so it makes perfect sense to always and only use the dom-tree
powered mem2reg. This was flag-flipper earlier and has stuck reasonably
so I wanted to gut the now-dead code out of SROA before we waste more
time with it. Among other things, this will make passmanager porting
easier.
llvm-svn: 246028
The binaries containing the linked DWARF generated by dsymutil are not
standard relocatable object files like emitted did previsously. They should be
dSYM companion files, which means they have a different file type in the
header, but also a couple other peculiarities:
- they contain the segments and sections from the original binary in their
load commands, but not the actual contents. This means they get an address
and a size, but their offset is always 0 (but these are not virtual sections)
- they also conatin all the defined symbols from the original binary
This makes MC a really bad fit to emit these kind of binaries. The approach
that was used in this patch is to leverage MC's section layout for the
debug sections, but to use a replacement for MachObjectWriter that lives
in MachOUtils.cpp. Some of the low-level helpers from MachObjectWriter
were reused too.
llvm-svn: 246012
llvm-dsymutil needs to emit dSYM companion bundles. These are binary files
that replicate some of the orignal binary file properties (sections and
symbols). To get acces to these properties, pass the binary path in the
debug map.
llvm-svn: 246011
Summary: When comparing basic blocks, there is an additional check that two Value*'s should have the same ID, which interferes with merging equivalent constants of different kinds (such as a ConstantInt and a ConstantPointerNull in the included testcase). The cmpValues function already ensures that the two values in each function are the same, so removing this check should not cause incorrect merging.
Also, the type comparison is redundant, based on reviewing the code and testing on the test suite and several large LTO bitcodes.
Author: jrkoenig
Reviewers: nlewycky, jfb, dschuff
Subscribers: llvm-commits
Differential revision: http://reviews.llvm.org/D12302
llvm-svn: 246001
Summary:
This change makes the variable argument intrinsics, `llvm.va_start` and
`llvm.va_copy`, and the `va_arg` instruction behave as they do on Windows
inside a `CallingConv::X86_64_Win64` function. It's needed for a Clang patch
I have to add support for GCC's `__builtin_ms_va_list` constructs.
Reviewers: nadav, asl, eugenis
CC: llvm-commits
Differential Revision: http://llvm-reviews.chandlerc.com/D1622
llvm-svn: 245990
There was an issue in the test setup because the test requires an arch that
wasn't filtered by the lit.local.cfg, but given the set of bots that failed,
I'm not confident this is the (only) issue. So this commit also adds more
output to the test to help me track down the failure if it happens again.
Original commit message:
[dsymutil] Rewrite thumb triple names in user visible messages.
We autodetect triples from the input file(s) while reading the mach-o debug map.
As we need to create a Target from those triples, we always chose the thumb
variant (because the arm variant might not be 'instantiable' eg armv7m). The
user visible architecture names should still be 'arm' and not 'thumb' variants
though.
llvm-svn: 245988
Extend signed relational comparison instrumentation with a special
case for comparisons with -1. This fixes an MSan false positive when
such comparison is used as a sign bit test.
https://llvm.org/bugs/show_bug.cgi?id=24561
llvm-svn: 245980
When lowering switch statement, if bit tests are used then LLVM will always generates a jump to the default statement in the last bit test. However, this is not necessary when all cases in bit tests cover a contiguous range. This is because when generating the bit tests header MBB, there is a range check that guarantees cases in bit tests won't go outside of [low, high], where low and high are minimum and maximum case values in the bit tests. This patch checks if this is the case and then doesn't emit jump to default statement and hence saves a bit test and a branch.
Differential Revision: http://reviews.llvm.org/D12249
llvm-svn: 245976
This reverts commit r245960.
Multiple bots are failing on the new test. It seemd like llvm-dsymutil exits with an error. Investigating.
llvm-svn: 245964
We autodetect triples from the input file(s) while reading the mach-o debug map.
As we need to create a Target from those triples, we always chose the thumb
variant (because the arm variant might not be 'instantiable' eg armv7m). The
user visible architecture names should still be 'arm' and not 'thumb' variants
though.
llvm-svn: 245960
The loop minimum iterations check below ensures the loop has enough trip count so the generated
vector loop will likely be executed, and it covers the overflow check.
Differential Revision: http://reviews.llvm.org/D12107.
llvm-svn: 245952
This is a follow-on from the discussion in http://reviews.llvm.org/D12154.
This change allows memset/memcpy to use SSE or AVX memory accesses for any chip that has
generally fast unaligned memory ops.
A motivating use case for this change is a clang invocation that doesn't explicitly set
the CPU, but does target a feature that we know only exists on a CPU that supports fast
unaligned memops. For example:
$ clang -O1 foo.c -mavx
This resolves a difference in lowering noted in PR24449:
https://llvm.org/bugs/show_bug.cgi?id=24449
Before this patch, we used different store types depending on whether the example can be
lowered as a memset or not.
Differential Revision: http://reviews.llvm.org/D12288
llvm-svn: 245950
This fixes two issues in x86 fptoui lowering.
1) Makes conversions from f80 go through the right path on AVX-512.
2) Implements an inline sequence for fptoui i64 instead of a library
call. This improves performance by 6X on SSE3+ and 3X otherwise.
Incidentally, it also removes the use of ftol2 for fptoui, which was
wrong to begin with, as ftol2 converts to a signed i64, producing
wrong results for values >= 2^63.
Patch by: mitch.l.bodart@intel.com
Differential Revision: http://reviews.llvm.org/D11316
llvm-svn: 245924
It doesn't solve the problem, when for example we load something, and
then assume that it is the same as some constant value, because
globalopt will fail on unknown load instruction. The proposed solution
would be to skip some instructions that we can't evaluate and they are
safe to skip (f.e. load, assume and many others) and see if they are
required to perform optimization (f.e. we don't care about ephemeral
instructions that may appear using @llvm.assume())
http://reviews.llvm.org/D12266
llvm-svn: 245919
We might end up with a trivial copy as the addend, and if so, we should ignore
the corresponding FMA instruction. The trivial copy can be coalesced away later,
so there's nothing to do here. We should not, however, assert. Fixes PR24544.
llvm-svn: 245907
Summary: I forgot to squash git commits before doing an svn dcommit of D12219. Reverting, and re-submitting.
Subscribers: jfb, llvm-commits
Differential Revision: http://reviews.llvm.org/D12298
llvm-svn: 245886
This patch fixes PR24546, which demonstrates a segfault during the VSX
swap removal pass. The problem is that debug value instructions were
not excluded from the list of instructions to be analyzed for webs of
related computation. I've added the test case from the PR as a crash
test in test/CodeGen/PowerPC.
llvm-svn: 245862
The FP16_TO_FP node only uses the bottom 16 bits of its input, so the
following pattern can be optimised by removing the AND:
(FP16_TO_FP (AND op, 0xffff)) -> (FP16_TO_FP op)
This is a common pattern for ARM targets when functions have __fp16
arguments, as they are passed as floats (so that they get passed in the
correct registers), but then bitcast and truncated to ignore the top 16
bits.
llvm-svn: 245832
Not only do we not need to do anything to read correct values from the
object files, but the current logic actually wrongly applies twice the
section base address when there is no LoadedObjectInfo passed to the
DWARFContext creation (as the added test shows).
Simply do not apply any relocations on the mach-o debug info if there is
no load offset to apply.
llvm-svn: 245807
This patch adds all the refactored tests in new files, the old
tests will be removed by a followup commit.
Thanks to D. Blaikie for all the feedback.
llvm-svn: 245803
Summary:
WinEHPrepare is going to require that cleanuppad and catchpad produce values
of token type which are consumed by any cleanupret or catchret exiting the
pad. This change updates the signatures of those operators to require/enforce
that the type produced by the pads is token type and that the rets have an
appropriate argument.
The catchpad argument of a `CatchReturnInst` must be a `CatchPadInst` (and
similarly for `CleanupReturnInst`/`CleanupPadInst`). To accommodate that
restriction, this change adds a notion of an operator constraint to both
LLParser and BitcodeReader, allowing appropriate sentinels to be constructed
for forward references and appropriate error messages to be emitted for
illegal inputs.
Also add a verifier rule (noted in LangRef) that a catchpad with a catchpad
predecessor must have no other predecessors; this ensures that WinEHPrepare
will see the expected linear relationship between sibling catches on the
same try.
Lastly, remove some superfluous/vestigial casts from instruction operand
setters operating on BasicBlocks.
Reviewers: rnk, majnemer
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D12108
llvm-svn: 245797
Some debug info was drastically out of date, from the days where we used
to emit a list of length one (with a single null entry) rather than an
empty list (or, more recently, no list at all) for list fields that have
no elements.
llvm-svn: 245796
There was already a good error path for this. Added a test for it & made
a minor code change to ensure the error path was actually reached,
rather than crashing before we got that far.
llvm-svn: 245795
Summary:
__shared__ variable may now emit undef value as initializer, do not
throw error on that.
Test Plan: test/CodeGen/NVPTX/global-addrspace.ll
Patch by Xuetian Weng
Reviewers: jholewinski, tra, jingyue
Subscribers: llvm-commits, jholewinski
Differential Revision: http://reviews.llvm.org/D12242
llvm-svn: 245785
Summary:
Merge functions previously relied on unsigned comparisons of pointer values to
order functions. This caused observable non-determinism in the compiler for
large bitcode programs. Basically, opt -mergefuncs program.bc | md5sum produces
different hashes when run repeatedly on the same machine. Differing output was
observed on three large bitcodes, but it was less frequent on the smallest file.
It is possible that this only manifests on the large inputs, hence remaining
undetected until now.
This patch fixes this by removing (almost, see below) all places where
comparisons between pointers are used to order functions. Most of these changes
are local, but the comparison of global values requires assigning an identifier
to each local in the order it is visited. This is very similar to the way the
comparison function identifies Value*'s defined within a function. Because the
order of visiting the functions and their subparts is deterministic, the
identifiers assigned to the globals will be as well, and the order of functions
will be deterministic.
With these changes, there is no more observed non-determinism. There is also
only minor slowdowns (negligible to 4%) compared to the baseline, which is
likely a result of the fact that global comparisons involve hash lookups and not
just pointer comparisons.
The one caveat so far is that programs containing BlockAddress constants can
still be non-deterministic. It is not clear what the right solution is here. In
particular, even if the global numbers are used to order by function, we still
need a way to order the BasicBlock*'s. Unfortunately, we cannot just bail out
and fail to order the functions or consider them equal, because we require a
total order over functions. Note that programs with BlockAddress constants are
relatively rare, so the impact of leaving this in is minor as long as this pass
is opt-in.
Author: jrkoenig
Reviewers: nlewycky, jfb, dschuff
Subscribers: jevinskie, llvm-commits, chapuni
Differential revision: http://reviews.llvm.org/D12168
llvm-svn: 245762
SCEV expansion can invalidate previously expanded values. For example
in SCEVExpander::ReuseOrCreateCast, if we already have the requested
cast value but it's not at the desired location, a new cast is inserted
and the old cast will be invalidated.
Therefore, when expanding the bounds for the pointers, a later entry can
invalidate the IR value for an earlier one. The fix is to store a value
handle rather than the value itself.
The newly added test has a more detailed description of how the bug
triggers.
This bug can have a negative but potentially highly variable performance
impact in Loop Distribution. Because one of the bound values was
invalidated and is an undef expression now, InstCombine is free to
transform the array overlap check:
Start0 <= End1 && Start1 <= End0
into:
Start0 <= End1
So depending on the runtime location of the arrays, we would detect a
conflict and fall back on the original loop of the versioned loop.
Also tested compile time with SPEC2006 LTO bc files.
llvm-svn: 245760
We can wait on either VM, EXP or LGKM.
The waits are independent.
Without this patch, a wait inserted because of one of them
would also wait for all the previous others.
This patch makes s_wait only wait for the ones we need for the next
instruction.
Here's an example of subtle perf reduction this patch solves:
This is without the patch:
buffer_load_format_xyzw v[8:11], v0, s[44:47], 0 idxen
buffer_load_format_xyzw v[12:15], v0, s[48:51], 0 idxen
s_load_dwordx4 s[44:47], s[8:9], 0xc
s_waitcnt lgkmcnt(0)
buffer_load_format_xyzw v[16:19], v0, s[52:55], 0 idxen
s_load_dwordx4 s[48:51], s[8:9], 0x10
s_waitcnt vmcnt(1)
buffer_load_format_xyzw v[20:23], v0, s[44:47], 0 idxen
The s_waitcnt vmcnt(1) is useless.
The reason it is added is because the last
buffer_load_format_xyzw needs s[44:47], which was issued
by the first s_load_dwordx4. It waits for all VM
before that call to have finished.
Internally after every instruction, 3 counters (for VM, EXP and LGTM)
are updated after every instruction. For example buffer_load_format_xyzw
will
increase the VM counter, and s_load_dwordx4 the LGKM one.
Without the patch, for every defined register,
the current 3 counters are stored, and are used to know
how long to wait when an instruction needs the register.
Because of that, the s[44:47] counter includes that to use the register
you need to wait for the previous buffer_load_format_xyzw.
Instead this patch stores only the counters that matter for the
register,
and puts zero for the other ones, since we don't need any wait for them.
Patch by: Axel Davy
Differential Revision: http://reviews.llvm.org/D11883
llvm-svn: 245755
The original checkin was buggy, this change has a fix.
Original commit message:
[InstCombine] Transform A & (L - 1) u< L --> L != 0
Summary:
This transform is never a pessimization at the IR level (since it
replaces an `icmp` with another), and has potentiall payoffs:
1. It may make the `icmp` fold away or become loop invariant.
2. It may make the `A & (L - 1)` computation dead.
This shows up in Java, in range checks generated by array accesses of
the form `a[i & (a.length - 1)]`.
Reviewers: reames, majnemer
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D12210
llvm-svn: 245753
When PPCVSXFMAMutate would look at the input addend register, it would get its
input value number. This would fail, however, if the register was undef,
causing a segfault. Don't segfault (just skip such FMA instructions).
Fixes the test case from PR24542 (although that may have been over-reduced).
llvm-svn: 245741
See discussion in D12154 ( http://reviews.llvm.org/D12154 ), AMD Software
Optimization Guides for 10H/12H/15H/16H, and Agner Fog's experimental data.
llvm-svn: 245733
This will confirm that the patch in D12154 is actually NFC.
It will also confirm that the proposed changes for the AMD chips
are behaving as expected.
llvm-svn: 245704
This is intended to improve code generation for GEPs, as the index value is
shifted by the element size and in GEPs of multi-dimensional arrays the index
of higher dimensions is multiplied by the lower dimension size.
Differential Revision: http://reviews.llvm.org/D12197
llvm-svn: 245689
Note: I do not implement a base pointer, so it's still impossible to
have dynamic realignment AND dynamic alloca in the same function.
This also moves the code for determining the frame index reference
into getFrameIndexReference, where it belongs, instead of inline in
eliminateFrameIndex.
[Begin long-winded screed]
Now, stack realignment for Sparc is actually a silly thing to support,
because the Sparc ABI has no need for it -- unlike the situation on
x86, the stack is ALWAYS aligned to the required alignment for the CPU
instructions: 8 bytes on sparcv8, and 16 bytes on sparcv9.
However, LLVM unfortunately implements user-specified overalignment
using stack realignment support, so for now, I'm going to go along
with that tradition. GCC instead treats objects which have alignment
specification greater than the maximum CPU-required alignment for the
target as a separate block of stack memory, with their own virtual
base pointer (which gets aligned). Doing it that way avoids needing to
implement per-target support for stack realignment, except for the
targets which *actually* have an ABI-specified stack alignment which
is too small for the CPU's requirements.
Further unfortunately in LLVM, the default canRealignStack for all
targets effectively returns true, despite that implementing that is
something a target needs to do specifically. So, the previous behavior
on Sparc was to silently ignore the user's specified stack
alignment. Ugh.
Yet MORE unfortunate, if a target actually does return false from
canRealignStack, that also causes the user-specified alignment to be
*silently ignored*, rather than emitting an error.
(I started looking into fixing that last, but it broke a bunch of
tests, because LLVM actually *depends* on having it silently ignored:
some architectures (e.g. non-linux i386) have smaller stack alignment
than spilled-register alignment. But, the fact that a register needs
spilling is not known until within the register allocator. And by that
point, the decision to not reserve the frame pointer has been frozen
in place. And without a frame pointer, stack realignment is not
possible. So, canRealignStack() returns false, and
needsStackRealignment() then returns false, assuming everyone can just
go on their merry way assuming the alignment requirements were
probably just suggestions after-all. Sigh...)
Differential Revision: http://reviews.llvm.org/D12208
llvm-svn: 245668
The module splitter splits a module into linkable partitions. It will
be used to implement parallel LTO code generation.
This initial version of the splitter does not attempt to deal with the
somewhat subtle symbol visibility issues around module splitting. These
will be dealt with in a future change.
Differential Revision: http://reviews.llvm.org/D12132
llvm-svn: 245662
When producing conditional compare sequences for or operations we need
to negate the operands and the finally tested flags. The thing is if we negate
the finally tested flags this equals a logical negation of all previously
emitted expressions. There was a case missing where we have to order OR
expressions so they get emitted first.
This fixes http://llvm.org/PR24459
llvm-svn: 245641
Create CMP;CCMP sequences from and/or trees does not gain us anything if
the and/or tree is materialized to a GP register anyway. While most of
the code already checked for hasOneUse() there was one important case
missing.
llvm-svn: 245640
Summary:
This transform is never a pessimization at the IR level (since it
replaces an `icmp` with another), and has potentiall payoffs:
1. It may make the `icmp` fold away or become loop invariant.
2. It may make the `A & (L - 1)` computation dead.
This shows up in Java, in range checks generated by array accesses of
the form `a[i & (a.length - 1)]`.
Reviewers: reames, majnemer
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D12210
llvm-svn: 245635
Fixes PR23464: one way to use the broadcast intrinsics is:
_mm256_broadcastw_epi16(_mm_cvtsi32_si128(*(int*)src));
We don't currently fold this, but now that we use native IR for
the intrinsics (r245605), we can look through one bitcast to find
the broadcast scalar.
Differential Revision: http://reviews.llvm.org/D10557
llvm-svn: 245613
Summary:
Add an LSR test that exercises isTruncateFree. Without this change, LSR creates
another indvar representing the truncated value.
Reviewers: jholewinski, eliben
Subscribers: jholewinski, llvm-commits
Differential Revision: http://reviews.llvm.org/D12058
llvm-svn: 245611
Since r245605, the clang headers don't use these anymore.
r245165 updated some of the tests already; update the others, add
an autoupgrade, remove the intrinsics, and cleanup the definitions.
Differential Revision: http://reviews.llvm.org/D10555
llvm-svn: 245606
Instruction::dropUnknownMetadata(KnownSet) is supposed to preserve all
metadata in KnownSet, but the condition for DebugLocs was inverted.
Most users of dropUnknownMetadata() actually worked around this by not
adding LLVMContext::MD_dbg to their list of KnowIDs.
This is now made explicit.
llvm-svn: 245589
Caught by the famous "DebugLoc describes the currect SubProgram" assertion.
When GVN is removing a nonlocal load it updates the debug location of the
SSA value it replaced the load with with the one of the load. In the
testcase this actually overwrites a valid debug location with an empty one.
In reality GVN has to make an arbitrary choice between two equally valid
debug locations. This patch changes to behavior to only update the
location if the value doesn't already have a debug location.
llvm-svn: 245588
Summary: We know that -x & 1 is equivalent to x & 1, avoid using negation for testing if a negative integer is even or odd.
Reviewers: majnemer
Subscribers: junbuml, mssimpso, gberry, mcrosier, llvm-commits
Differential Revision: http://reviews.llvm.org/D12156
llvm-svn: 245569
COMISD should receive QWORD because it is defined as
(V)COMISD xmm1, xmm2/m64
COMISS should receive DWORD because it is defined as
(V)COMISS xmm1, xmm2/m32
Differential Revision: http://reviews.llvm.org/D11712
llvm-svn: 245551
Usually DSE is not supposed to remove lifetime intrinsics, but it's
actually ok to remove them for dead objects in terminating blocks,
because they convey no extra information there. Until we hit a lifetime
start that cannot be removed, that is. Because from that point on the
lifetime intrinsics become interesting again, e.g. for stack coloring.
Reviewers: reames
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D11710
llvm-svn: 245542
XVCMPEQDP is used for VSX v2f64 equality comparisons, but the value type needs
to be v2i64 (as that's the corresponding SETCC type).
Fixes PR24225.
llvm-svn: 245535
This DAGCombine was creating custom SDAG nodes with an illegal ppc_fp128
operand type because it was triggering on f64/f32 int2fp(fp2int(ppc_fp128 x)),
but shouldn't (it should only apply to f32/f64 types). The result was a crash.
llvm-svn: 245530
This commit modifies the serialization syntax so that the global IR values in
machine memory operands use the global value '@<name>' syntax instead of the
current '%ir.<name>' syntax.
The unnamed global IR values are handled by this commit as well, as the
existing global value parsing method can parse the unnamed globals already.
llvm-svn: 245527
The global IR values in machine memory operands should use the global value
'@<name>' syntax instead of the current '%ir.<name>' syntax.
However, the global value call entry pseudo source values use the global value
syntax already. Therefore, the syntax for the call entry pseudo source values
has to be changed so that the global values and call entry global value PSVs
can be parsed without ambiguities.
llvm-svn: 245526
We still need to add constant folding of vector comparisons to fold the tests for targets that don't support the respective min/max nodes
I needed to update 2011-12-06-AVXVectorExtractCombine to load a vector instead of using a constant vector to prevent it folding
Differential Revision: http://reviews.llvm.org/D12118
llvm-svn: 245503
We are already falling back to SelectionDAG when encountering an shift with UB.
This adds the same checks for shifts with UB that get folded into arithmetic or
logical operations.
This fixes rdar://problem/22345295.
llvm-svn: 245499
We don't do a great job with >= 0 comparisons against zero when the
result is used as an i8.
Given something like:
void f(long long LL, bool *B) {
*B = LL >= 0;
}
We used to generate:
shrq $63, %rdi
xorb $1, %dil
movb %dil, (%rsi)
Now we generate:
testq %rdi, %rdi
setns (%rsi)
Differential Revision: http://reviews.llvm.org/D12136
llvm-svn: 245498
Previously WebAssembly's datalayout string had -v128:8:128. This had been an
attempt to declare a certain level of support for unaligned SIMD accesses.
However, clang makes its own determinations for SIMD alignment that are
independent of the datalayout string, so this wasn't actually meaningful.
llvm-svn: 245494
Check to see if this is a CONCAT_VECTORS of a bunch of EXTRACT_SUBVECTOR operations. If so, and if the EXTRACT_SUBVECTOR vector inputs come from at most two distinct vectors the same size as the result, attempt to turn this into a legal shuffle.
Differential Revision: http://reviews.llvm.org/D12125
llvm-svn: 245490
This commit serializes the machine instruction's register operand ties.
The ties are printed out only when the instructon has register ties that are
different from the ties that are specified in the instruction's description.
llvm-svn: 245482
This revision has introduced an issue that only affects bootstrapped compiler
when it is printing the ASM. I am working on resolving the issue, but in the
meantime, I'm disabling the legalization of scalar_to_vector operation for v2i64
and the associated testing until I can get this fixed.
llvm-svn: 245481
The defined registers are already serialized - they are represented by placing
them before the '=' in a machine instruction. However, certain instructions like
INLINEASM can have defined register operands after the '=', so this commit
introduces the 'def' register flag for such operands.
llvm-svn: 245480
Reintroduce r245442. Remove an overly conservative assertion introduced
in r245442. We could replace the assertion to use `shareSameRegisterFile`
instead, but in that point in `insertPHI` we already lost the original
Def subreg to check against. So drop the assertion completely.
Original commit message:
- Teaches the ValueTracker in the PeepholeOptimizer to look through PHI
instructions.
- Add findNextSourceAndRewritePHI method to lookup into multiple sources
returnted by the ValueTracker and rewrite PHIs with new sources.
With these changes we can find more register sources and rewrite more
copies to allow coaslescing of bitcast instructions. Hence, we eliminate
unnecessary VR64 <-> GR64 copies in x86, but it could be extended to
other archs by marking "isBitcast" on target specific instructions. The
x86 example follows:
A:
psllq %mm1, %mm0
movd %mm0, %r9
jmp C
B:
por %mm1, %mm0
movd %mm0, %r9
jmp C
C:
movd %r9, %mm0
pshufw $238, %mm0, %mm0
Becomes:
A:
psllq %mm1, %mm0
jmp C
B:
por %mm1, %mm0
jmp C
C:
pshufw $238, %mm0, %mm0
Differential Revision: http://reviews.llvm.org/D11197
rdar://problem/20404526
llvm-svn: 245479
Since r244955, we try to use the short-form ErrorInfo when both
tries failed, and the long-form match failed on a suffix operand.
However, this means we sometimes mix ErrorInfo and MatchResult
(one manifestation of this being PR24498). Instead, restore both.
llvm-svn: 245469
This patch updates the X86 lowering so that the Exception Pointer and Selector
are 64-bit wide only if Subtarget.isTarget64BitLP64.
Patch by João Porto
Reviewers: dschuff, rnk
Differential Revision: http://reviews.llvm.org/D12111
llvm-svn: 245454
Reapply r243486.
- Teaches the ValueTracker in the PeepholeOptimizer to look through PHI
instructions.
- Add findNextSourceAndRewritePHI method to lookup into multiple sources
returnted by the ValueTracker and rewrite PHIs with new sources.
With these changes we can find more register sources and rewrite more
copies to allow coaslescing of bitcast instructions. Hence, we eliminate
unnecessary VR64 <-> GR64 copies in x86, but it could be extended to
other archs by marking "isBitcast" on target specific instructions. The
x86 example follows:
A:
psllq %mm1, %mm0
movd %mm0, %r9
jmp C
B:
por %mm1, %mm0
movd %mm0, %r9
jmp C
C:
movd %r9, %mm0
pshufw $238, %mm0, %mm0
Becomes:
A:
psllq %mm1, %mm0
jmp C
B:
por %mm1, %mm0
jmp C
C:
pshufw $238, %mm0, %mm0
Differential Revision: http://reviews.llvm.org/D11197
rdar://problem/20404526
llvm-svn: 245442
Summary:
The mid-end was generating vector smin/smax/umin/umax nodes, but
we were using vbsl to generatate the code. This adds the vmin/vmax
patterns and a test to check that we are now generating vmin/vmax
instructions.
Reviewers: rengolin, jmolloy
Subscribers: aemerson, rengolin, llvm-commits
Differential Revision: http://reviews.llvm.org/D12105
llvm-svn: 245439
There are some cases where the mul sequence is smaller, but for the most part,
using a div is preferable. This does not apply to vectors, since x86 doesn't
have vector idiv, and a vector mul/shifts sequence ought to be smaller than a
scalarized division.
Differential Revision: http://reviews.llvm.org/D12082
llvm-svn: 245431
Fix how DependenceAnalysis calls delinearization, mirroring what is done in
Delinearization.cpp (mostly by making sure to call getSCEVAtScope before
delinearizing, and by removing the unnecessary 'Pairs == 1' check).
Patch by Vaivaswatha Nagaraj!
llvm-svn: 245408
Here we make ScalarEvolution::isKnownPredicate, indirectly, a little smarter.
Given some relational comparison operator OP, and two AddRec SCEVs, {I,+,S} OP
{J,+,T}, we can reduce this to the comparison I OP J when S == T, both AddRecs
are for the same loop, and both are known not to wrap.
As it turns out, because of the way that backedge-guard expressions can be
leveraged when computing known predicates, this allows indvars to simplify the
if-statement comparison in this loop:
void foo (int *a, int *b, int n) {
for (int i = 0; i < n; ++i) {
if (i > n)
a[i] = b[i] + 1;
}
}
which, somewhat surprisingly, we were not previously optimizing away.
llvm-svn: 245400
This commit adds support for bit mask target flag serialization to the MIR
printer and the MIR parser. It also adds support for the machine operand's
target flag serialization to the AArch64 target.
Reviewers: Duncan P. N. Exon Smith
llvm-svn: 245383
To properly handle this, define the *a instructions as separate
instruction classes by refactoring the LoadA and StoreA multiclasses.
Move the instruction tests into the sparcv9 file to test the difference.
llvm-svn: 245360
The current code normalizes select(C0, x, select(C1, x, y)) towards
select(C0|C1, x, y) if the targets prefers that form. This patch adds an
additional rule that if the select(C1, x, y) part already exists in the
function then we want to normalize into the other direction because the
effects of reusing the existing value are bigger than transforming into
the target preferred form.
This addresses regressions following r238793, see also:
http://lists.cs.uiuc.edu/pipermail/llvm-commits/Week-of-Mon-20150727/290272.html
Differential Revision: http://reviews.llvm.org/D11616
llvm-svn: 245350
State numbers are calculated by performing a walk from the innermost
funclet to the outermost funclet. Rudimentary support for the new EH
constructs has been added to the assembly printer, just enough to test
the new machinery.
Differential Revision: http://reviews.llvm.org/D12098
llvm-svn: 245331
Summary: This is the correct way to handle JAL instructions when PIC is enabled.
Patch by Toma Tabacu
Reviewers: seanbruno, tomatabacu
Subscribers: brooks, seanbruno, emaste, llvm-commits
Differential Revision: http://reviews.llvm.org/D6231
llvm-svn: 245305
This is (almost) everything under MC/MachO/ARM. There are still some
cases missing, because llvm-readobj doesn't (yet) support some features,
that macho-dump provides. I plan to reduce the gap between them shortly.
llvm-svn: 245302
After hitting @llvm.assume(X) we can:
- propagate equality that X == true
- if X is icmp/fcmp (with eq operation), and one of operand
is constant we can change all variables with constants in the same BasicBlock
http://reviews.llvm.org/D11918
llvm-svn: 245265
It is possible to be in a situation where more than one funclet token is
a valid SSA value. If we see a terminator which exits a funclet which
doesn't use the funclet's token, replace it with unreachable.
Differential Revision: http://reviews.llvm.org/D12074
llvm-svn: 245238
Summary:
Increase the estimated costs for insert/extract element operations on
AArch64. This is motivated by results from benchmarking interleaved
accesses.
Add missing costs for zext/sext/trunc instructions and some integer to
floating point conversions. These costs were previously calculated
by scalarizing these operation and were affected by the cost increase of
the insert/extract element operations.
Reviewers: rengolin
Subscribers: mcrosier, aemerson, rengolin, llvm-commits
Differential Revision: http://reviews.llvm.org/D11939
llvm-svn: 245226
Summary:
This change limits the minimum cost of an insert/extract
element operation to 2 in cases where this would result
in mixing of NEON and VFP code.
Reviewers: rengolin
Subscribers: mssimpso, aemerson, llvm-commits, rengolin
Differential Revision: http://reviews.llvm.org/D12030
llvm-svn: 245225
Summary:
When demoting an SSA value that has a use on a phi and one of the phi's
predecessors terminates with catchret, the edge needs to be split and the
load inserted in the new block, else we'll still have a cross-funclet SSA
value.
Add a test for this, and for the similar case where a def to be spilled is
on and invoke and a critical edge, which was already implemented but
missing a test.
Reviewers: majnemer
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D12065
llvm-svn: 245218
Summary: It is the same as LA, except that it can also load 64-bit addresses and it only works on 64-bit MIPS architectures.
Reviewers: tomatabacu, seanbruno, vkalintiris
Subscribers: brooks, seanbruno, emaste, llvm-commits
Differential Revision: http://reviews.llvm.org/D9524
llvm-svn: 245208
These only get generated if the target supports them. If one of the variants is not legal and the other is, and it is safe to do so, the other variant will be emitted.
For example on AArch32 (V8), we have scalar fminnm but not fmin.
Fix up a couple of tests while we're here - one now produces better code, and the other was just plain wrong to start with.
llvm-svn: 245196
PR24469 resulted because DeleteDeadInstruction in handleNonLocalStoreDeletion was
deleting the next basic block iterator. Fixed the same by resetting the basic block iterator
post call to DeleteDeadInstruction.
llvm-svn: 245195
This change makes ScalarEvolution a stand-alone object and just produces
one from a pass as needed. Making this work well requires making the
object movable, using references instead of overwritten pointers in
a number of places, and other refactorings.
I've also wired it up to the new pass manager and added a RUN line to
a test to exercise it under the new pass manager. This includes basic
printing support much like with other analyses.
But there is a big and somewhat scary change here. Prior to this patch
ScalarEvolution was never *actually* invalidated!!! Re-running the pass
just re-wired up the various other analyses and didn't remove any of the
existing entries in the SCEV caches or clear out anything at all. This
might seem OK as everything in SCEV that can uses ValueHandles to track
updates to the values that serve as SCEV keys. However, this still means
that as we ran SCEV over each function in the module, we kept
accumulating more and more SCEVs into the cache. At the end, we would
have a SCEV cache with every value that we ever needed a SCEV for in the
entire module!!! Yowzers. The releaseMemory routine would dump all of
this, but that isn't realy called during normal runs of the pipeline as
far as I can see.
To make matters worse, there *is* actually a key that we don't update
with value handles -- there is a map keyed off of Loop*s. Because
LoopInfo *does* release its memory from run to run, it is entirely
possible to run SCEV over one function, then over another function, and
then lookup a Loop* from the second function but find an entry inserted
for the first function! Ouch.
To make matters still worse, there are plenty of updates that *don't*
trip a value handle. It seems incredibly unlikely that today GVN or
another pass that invalidates SCEV can update values in *just* such
a way that a subsequent run of SCEV will incorrectly find lookups in
a cache, but it is theoretically possible and would be a nightmare to
debug.
With this refactoring, I've fixed all this by actually destroying and
recreating the ScalarEvolution object from run to run. Technically, this
could increase the amount of malloc traffic we see, but then again it is
also technically correct. ;] I don't actually think we're suffering from
tons of malloc traffic from SCEV because if we were, the fact that we
never clear the memory would seem more likely to have come up as an
actual problem before now. So, I've made the simple fix here. If in fact
there are serious issues with too much allocation and deallocation,
I can work on a clever fix that preserves the allocations (while
clearing the data) between each run, but I'd prefer to do that kind of
optimization with a test case / benchmark that shows why we need such
cleverness (and that can test that we actually make it faster). It's
possible that this will make some things faster by making the SCEV
caches have higher locality (due to being significantly smaller) so
until there is a clear benchmark, I think the simple change is best.
Differential Revision: http://reviews.llvm.org/D12063
llvm-svn: 245193
If we can ignore NaNs, fmin/fmax libcalls can become compare and select
(this is what we turn std::min / std::max into).
This IR should then be optimized in the backend to whatever is best for
any given target. Eg, x86 can use minss/maxss instructions.
This should solve PR24314:
https://llvm.org/bugs/show_bug.cgi?id=24314
Differential Revision: http://reviews.llvm.org/D11866
llvm-svn: 245187
Bitwise arithmetic can obscure a simple sign-test. If replacing the
mask with a truncate is preferable if the type is legal because it
permits us to rephrase the comparison more explicitly.
llvm-svn: 245171
We can set additional bits in a mask given that we know the other
operand of an AND already has some bits set to zero. This can be more
efficient if doing so allows us to use an instruction which implicitly
sign extends the immediate.
This fixes PR24085.
Differential Revision: http://reviews.llvm.org/D11289
llvm-svn: 245169
For cases where we TRUNCATE and then ZERO_EXTEND to a larger size (often from vector legalization), see if we can mask the source data and then ZERO_EXTEND (instead of after a ANY_EXTEND). This can help avoid having to generate a larger mask, and possibly applying it to several sub-vectors.
(zext (truncate x)) -> (zext (and(x, m))
Includes a minor patch to SystemZ to better recognise 8/16-bit zero extension patterns from RISBG bit-extraction code.
This is the first of a number of minor patches to help improve the conversion of byte masks to clear mask shuffles.
Differential Revision: http://reviews.llvm.org/D11764
llvm-svn: 245160
Some personality routines require funclet exit points to be clearly
marked, this is done by producing a token at the funclet pad and
consuming it at the corresponding ret instruction. CleanupReturnInst
already had a spot for this operand but CatchReturnInst did not.
Other personality routines don't need to use this which is why it has
been made optional.
llvm-svn: 245149
This patch makes the Merge Functions pass faster by calculating and comparing
a hash value which captures the essential structure of a function before
performing a full function comparison.
The hash is calculated by hashing the function signature, then walking the basic
blocks of the function in the same order as the main comparison function. The
opcode of each instruction is hashed in sequence, which means that different
functions according to the existing total order cannot have the same hash, as
the comparison requires the opcodes of the two functions to be the same order.
The hash function is a static member of the FunctionComparator class because it
is tightly coupled to the exact comparison function used. For example, functions
which are equivalent modulo a single variant callsite might be merged by a more
aggressive MergeFunctions, and the hash function would need to be insensitive to
these differences in order to exploit this.
The hashing function uses a utility class which accumulates the values into an
internal state using a standard bit-mixing function. Note that this is a different interface
than a regular hashing routine, because the values to be hashed are scattered
amongst the properties of a llvm::Function, not linear in memory. This scheme is
fast because only one word of state needs to be kept, and the mixing function is
a few instructions.
The main runOnModule function first computes the hash of each function, and only
further processes functions which do not have a unique function hash. The hash
is also used to order the sorted function set. If the hashes differ, their
values are used to order the functions, otherwise the full comparison is done.
Both of these are helpful in speeding up MergeFunctions. Together they result in
speedups of 9% for mysqld (a mostly C application with little redundancy), 46%
for libxul in Firefox, and 117% for Chromium. (These are all LTO builds.) In all
three cases, the new speed of MergeFunctions is about half that of the module
verifier, making it relatively inexpensive even for large LTO builds with
hundreds of thousands of functions. The same functions are merged, so this
change is free performance.
Author: jrkoenig
Reviewers: nlewycky, dschuff, jfb
Subscribers: llvm-commits, aemerson
Differential revision: http://reviews.llvm.org/D11923
llvm-svn: 245140
This seems to only work some of the time. In some situations,
this seems to use a nonsensical type and isn't actually aware of the
memory being accessed. e.g. if branch condition is an icmp of a pointer,
it checks the addressing mode of i1.
llvm-svn: 245137
Summary:
http://reviews.llvm.org/D11212 made Scalar Evolution able to propagate NSW and NUW flags from instructions to SCEVs for add instructions. This patch expands that to sub, mul and shl instructions.
This change makes LSR able to generate pointer induction variables for loops like these, where the index is 32 bit and the pointer is 64 bit:
for (int i = 0; i < numIterations; ++i)
sum += ptr[i - offset];
for (int i = 0; i < numIterations; ++i)
sum += ptr[i * stride];
for (int i = 0; i < numIterations; ++i)
sum += ptr[3 * (i << 7)];
Reviewers: atrick, sanjoy
Subscribers: sanjoy, majnemer, hfinkel, llvm-commits, meheff, jingyue, eliben
Differential Revision: http://reviews.llvm.org/D11860
llvm-svn: 245118
Although targeting CoreCLR is similar to targeting MSVC, there are
certain important differences that the backend must be aware of
(e.g. differences in stack probes, EH, and library calls).
Differential Revision: http://reviews.llvm.org/D11012
llvm-svn: 245115
We canonicalize V64 vectors to V128 through insert_subvector: the other
FMLA/FMLS/FMUL/FMULX patterns match that already, but this one doesn't,
so we'd fail to match fmls and generate fneg+fmla instead.
The vector equivalents are already tested and functional.
llvm-svn: 245107
This patch makes the Darwin ARM backend take advantage of TargetParser. It
also teaches TargetParser about ARMV7K for the first time. This makes target
triple parsing more consistent across llvm.
Differential Revision: http://reviews.llvm.org/D11996
llvm-svn: 245081
This patch fixes the x86 implementation of allowsMisalignedMemoryAccess() to correctly
return the 'Fast' output parameter for 32-byte accesses. To test that, an existing load
merging optimization is changed to use the TLI hook. This exposes a shortcoming in the
current logic and results in the regression test update. Changing other direct users of
the isUnalignedMem32Slow() x86 CPU attribute would be a follow-on patch.
Without the fix in allowsMisalignedMemoryAccesses(), we will infinite loop when targeting
SandyBridge because LowerINSERT_SUBVECTOR() creates 32-byte loads from two 16-byte loads
while PerformLOADCombine() splits them back into 16-byte loads.
Differential Revision: http://reviews.llvm.org/D10662
llvm-svn: 245075
Summary: Similar to the change we applied to ASan. The same test case works.
Reviewers: samsonov
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D11961
llvm-svn: 245067
This reverts commit r245047.
It was failing on the darwin bots. The problem was that when running
./bin/llc -march=msp430
llc gets to
if (TheTriple.getTriple().empty())
TheTriple.setTriple(sys::getDefaultTargetTriple());
Which means that we go with an arch of msp430 but a triple of
x86_64-apple-darwin14.4.0 which fails badly.
That code has to be updated to select a triple based on the value of
march, but that is not a trivial fix.
llvm-svn: 245062
Other than some places that were handling unknown as ELF, this should
have no change. The test updates are because we were detecting
arm-coff or x86_64-win64-coff as ELF targets before.
It is not clear if the enum should live on the Triple. At least now it lives
in a single location and should be easier to move somewhere else.
llvm-svn: 245047
Spotted by Ahmed - in r244594 I inadvertently marked f16 min/max as legal.
I've reverted it here, and marked min/max on scalar f16's as promote. I've also added a testcase. The test just checks that the compiler doesn't fall over - it doesn't create fmin nodes for f16 yet.
llvm-svn: 245035
This introduces the basic functionality to support "token types".
The motivation stems from the need to perform operations on a Value
whose provenance cannot be obscured.
There are several applications for such a type but my immediate
motivation stems from WinEH. Our personality routine enforces a
single-entry - single-exit regime for cleanups. After several rounds of
optimizations, we may be left with a terminator whose "cleanup-entry
block" is not entirely clear because control flow has merged two
cleanups together. We have experimented with using labels as operands
inside of instructions which are not terminators to indicate where we
came from but found that LLVM does not expect such exotic uses of
BasicBlocks.
Instead, we can use this new type to clearly associate the "entry point"
and "exit point" of our cleanup. This is done by having the cleanuppad
yield a Token and consuming it at the cleanupret.
The token type makes it impossible to obscure or otherwise hide the
Value, making it trivial to track the relationship between the two
points.
What is the burden to the optimizer? Well, it turns out we have already
paid down this cost by accepting that there are certain calls that we
are not permitted to duplicate, optimizations have to watch out for
such instructions anyway. There are additional places in the optimizer
that we will probably have to update but early examination has given me
the impression that this will not be heroic.
Differential Revision: http://reviews.llvm.org/D11861
llvm-svn: 245029
Summary:
This patch implements my promised optimization to reunites certain sexts from
operands after we extract the constant offset. See the header comment of
reuniteExts for its motivation.
One key building block that enables this optimization is Bjarke's poison value
analysis (D11212). That helps to prove "a +nsw b" can't overflow.
Reviewers: broune
Subscribers: jholewinski, sanjoy, llvm-commits
Differential Revision: http://reviews.llvm.org/D12016
llvm-svn: 245003
This commit modifies the way the machine basic blocks are serialized - now the
machine basic blocks are serialized using a custom syntax instead of relying on
YAML primitives. Instead of using YAML mappings to represent the individual
machine basic blocks in a machine function's body, the new syntax uses a single
YAML block scalar which contains all of the machine basic blocks and
instructions for that function.
This is an example of a function's body that uses the old syntax:
body:
- id: 0
name: entry
instructions:
- '%eax = MOV32r0 implicit-def %eflags'
- 'RETQ %eax'
...
The same body is now written like this:
body: |
bb.0.entry:
%eax = MOV32r0 implicit-def %eflags
RETQ %eax
...
This syntax change is motivated by the fact that the bundled machine
instructions didn't map that well to the old syntax which was using a single
YAML sequence to store all of the machine instructions in a block. The bundled
machine instructions internally use flags like BundledPred and BundledSucc to
determine the bundles, and serializing them as MI flags using the old syntax
would have had a negative impact on the readability and the ease of editing
for MIR files. The new syntax allows me to serialize the bundled machine
instructions using a block construct without relying on the internal flags,
for example:
BUNDLE implicit-def dead %itstate, implicit-def %s1 ... {
t2IT 1, 24, implicit-def %itstate
%s1 = VMOVS killed %s0, 1, killed %cpsr, implicit killed %itstate
}
This commit also converts the MIR testcases to the new syntax. I developed
a script that can convert from the old syntax to the new one. I will post the
script on the llvm-commits mailing list in the thread for this commit.
llvm-svn: 244982
We used to just say "invalid type suffix for instruction", which is
misleading. This is because we fallback to the long-form matcher if the
short-form matcher failed, losing the error information on the way.
Save it, so that we can provide a little better diagnostics when the
long-form matcher thinks a suffix is the cause of the error.
llvm-svn: 244955
If <src> is non-zero we can safely set the flag to true, and this
results in less code generated for, e.g. ffs(x) + 1 on FreeBSD.
Thanks to majnemer for suggesting the fix and reviewing.
Code generated before the patch was applied:
0: 0f bc c7 bsf %edi,%eax
3: b9 20 00 00 00 mov $0x20,%ecx
8: 0f 45 c8 cmovne %eax,%ecx
b: 83 c1 02 add $0x2,%ecx
e: b8 01 00 00 00 mov $0x1,%eax
13: 85 ff test %edi,%edi
15: 0f 45 c1 cmovne %ecx,%eax
18: c3 retq
Code generated after the patch was applied:
0: 0f bc cf bsf %edi,%ecx
3: 83 c1 02 add $0x2,%ecx
6: 85 ff test %edi,%edi
8: b8 01 00 00 00 mov $0x1,%eax
d: 0f 45 c1 cmovne %ecx,%eax
10: c3 retq
It seems we can still use cmove and save another 'test' instruction, but
that can be tackled separately.
Differential Revision: http://reviews.llvm.org/D11989
llvm-svn: 244947
We used to be over-conservative about preserving inbounds. Actually, the second
GEP (which applies the constant offset) can inherit the inbounds attribute of
the original GEP, because the resultant pointer is equivalent to that of the
original GEP. For example,
x = GEP inbounds a, i+5
=>
y = GEP a, i // inbounds removed
x = GEP inbounds y, 5 // inbounds preserved
llvm-svn: 244937
This patch corresponds to review:
http://reviews.llvm.org/D11471
It improves the code generated for converting a scalar to a vector value. With
direct moves from GPRs to VSRs, we no longer require expensive stack operations
for this. Subsequent patches will handle the reverse case and more general
operations between vectors and their scalar elements.
llvm-svn: 244921
They rely on global fast-math options, but soon ISel will rely only on fast-math flags on the instructions themselves. Rip the fast checks out into their own file so we can mark their instructions as fast.
llvm-svn: 244914
These tests relied on -enable-no-nans-fp-math, whereas soon they'll take their no-nans hint
from the FCMP instruction itself, so split the no-nans stuff out into its own test.
Also do a slight rejig of instruction order. The old FMIN/MAX backend matching had to deal with looking through casts, which it never did particularly well. Now, instcombine will recognize such patterns and canonicalize the cast outside the select. So modify the test inputs to assume that instcombine has already run.
llvm-svn: 244913
DeadStoreElimination does eliminate a store if it stores a value which was loaded from the same memory location.
So far this worked only if the store is in the same block as the load.
Now we can also handle stores which are in a different block than the load.
Example:
define i32 @test(i1, i32*) {
entry:
%l2 = load i32, i32* %1, align 4
br i1 %0, label %bb1, label %bb2
bb1:
br label %bb3
bb2:
; This store is redundant
store i32 %l2, i32* %1, align 4
br label %bb3
bb3:
ret i32 0
}
Differential Revision: http://reviews.llvm.org/D11854
llvm-svn: 244901
Previously, for O32 ABI we did not calculate correct addend for R_MIPS_HI16
and R_MIPS_PCHI16 relocations. This patch fixes that.
Patch by Vladimir Radosavljevic.
Differential Revision: http://reviews.llvm.org/D11186
llvm-svn: 244897
Summary:
Update the demotion logic in WinEHPrepare to avoid creating new cleanups by
walking predecessors as necessary to insert stores for EH-pad PHIs.
Also avoid creating stores for EH-pad PHIs that have no uses.
The store/load placement is still pretty naive. Likely future improvements
(at least for optimized compiles) include:
- Share loads for related uses as possible
- Coalesce non-interfering use/def-related PHIs
- Store at definition point rather than each PHI pred for non-interfering
lifetimes.
Reviewers: rnk, majnemer
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D11955
llvm-svn: 244894
Recent mesa/llvmpipe crashes on SystemZ due to a failed assertion when
attempting to compile a routine with a return type of
{ <4 x float>, <4 x float>, <4 x float>, <4 x float> }
on a system without vector instruction support.
This is because after legalizing the vector type, we get a return value
consisting of 16 floats, which cannot all be returned in registers.
Usually, what should happen in this case is that the target's CanLowerReturn
routine rejects the return type, in which case SelectionDAG falls back to
implementing a structure return in memory via implicit reference.
However, the SystemZ target never actually implemented any CanLowerReturn
routine, and thus would accept any struct return type.
This patch fixes the crash by implementing CanLowerReturn. As a side effect,
this also handles fp128 return values, fixing a todo that was noted in
SystemZCallingConv.td.
llvm-svn: 244889
Consider this code:
BB:
%i = phi i32 [ 0, %if.then ], [ %c, %if.else ]
%add = add nsw i32 %i, %b
...
In this common case the add can be moved to the %if.else basic block, because
adding zero is an identity operation. If we go though %if.then branch it's
always a win, because add is not executed; if not, the number of instructions
stays the same.
This pattern applies also to other instructions like sub, shl, shr, ashr | 0,
mul, sdiv, div | 1.
Patch by Jakub Kuderski!
llvm-svn: 244887
Other than PC-relative loads/store the patterns that match the various
load/store addressing modes have the same complexity, so the order that they
are matched is the order that they appear in the .td file.
Rearrange the instruction definitions in ARMInstrThumb.td, and make use of
AddedComplexity for PC-relative loads, so that the instruction matching order
is the order that results in the simplest selection logic. This also makes
register-offset load/store be selected when it should, as previously it was
only selected for too-large immediate offsets.
Differential Revision: http://reviews.llvm.org/D11800
llvm-svn: 244882
Most SSE/AVX (non-constant) vector shift instructions only use the lower 64-bits of the 128-bit shift amount vector operand, this patch calls SimplifyDemandedVectorElts to optimize for this.
I had to refactor some of my recent InstCombiner work on the vector shifts to avoid quite a bit of duplicate code, it means that SimplifyX86immshift now (re)decodes the type of shift.
Differential Revision: http://reviews.llvm.org/D11938
llvm-svn: 244872
Now that we can properly promote mismatched FCOPYSIGNs (r244858), we
can mark the FP_ROUND on the result as truncating, to expose folding.
FCOPYSIGN doesn't change anything but the sign bit, so
(fp_round (fcopysign (fpext a), b))
is equivalent to (modulo the sign bit):
(fp_round (fpext a))
which is a no-op.
llvm-svn: 244862
We can lower them using our cool tricks if we fpext/fptrunc the second
input, like we do for f32/f64.
Follow-up to r243924, r243926, and r244858.
llvm-svn: 244860
We don't care about its type, and there's even a combine that'll fold
away the FP_EXTEND if we let it run. However, until it does, we'll have
something broken like:
(f32 (fp_extend (f64 v)))
Scalar f16 follow-up to r243924.
llvm-svn: 244858
To be clear: this is an *optimization* not a correctness change.
CodeGenPrep likes to duplicate icmps feeding branch instructions to take advantage of x86's ability to fuze many comparison/branch patterns into a single micro-op and to reduce the need for materializing i1s into general registers. PlaceSafepoints likes to place safepoint polls right at the end of basic blocks (immediately before terminators) when inserting entry and backedge safepoints. These two heuristics interact in a somewhat unfortunate way where the branch terminating the original block will be controlled by a condition driven by unrelocated pointers. This forces the register allocator to keep both the relocated and unrelocated values of the pointers feeding the icmp alive over the safepoint poll.
One simple fix would have been to just adjust PlaceSafepoints to move one back in the basic block, but you can reach similar cases as a result of LICM or other hoisting passes. As a result, doing a post insertion fixup seems to be more robust.
I considered doing this in CodeGenPrep itself, but having to update the live sets of already rewritten safepoints gets complicated fast. In particular, you can't just use def/use information because by moving the icmp, we're extending the live range of it's inputs potentially.
Instead, this patch teaches RewriteStatepointsForGC to make the required adjustments before making the relocations explicit in the IR. This change really highlights the fact that RSForGC is a CodeGenPrep-like pass which is performing target specific lowering. In the long run, we may even want to combine the two though this would require a lot more smarts to be integrated into RSForGC first. We currently rely on being able to run a set of cleanup passes post rewriting because the IR RSForGC generates is pretty damn ugly.
Differential Revision: http://reviews.llvm.org/D11819
llvm-svn: 244821
When rewriting the IR such that base pointers are available for every live pointer, we potentially need to duplicate instructions to propagate the base. The original code had only handled PHI and Select under the belief those were the only instructions which would need duplicated. When I added support for vector instructions, I'd added a collection of hacks for ExtractElement which caught most of the common cases. Of course, I then found the one test case my hacks couldn't cover. :)
This change removes all of the early hacks for extract element. By defining extractelement as a BDV (rather than trying to look through it), we can extend the rewriting algorithm to duplicate the extract as needed. Note that a couple of peephole optimizations were left in for the moment, because while we now handle extractelement as a first class citizen, we're not yet handling insertelement. That change will follow in the near future.
llvm-svn: 244808
Summary:
D11924 implemented part of the floating-point comparisons, this patch implements the rest:
* Tell ISelLowering that all booleans are either 0 or 1.
* Expand the eq/ne/lt/le/gt/ge floating-point comparisons to the canonical ones (similar to what Mips32r6InstrInfo.td does).
* Add tests for ord/uno.
* Add tests for ueq/one/ult/ule/ugt/uge.
* Fix existing comparison tests to remove the (res & 1) code, which setBooleanContents stops from generating.
Reviewers: sunfish
Subscribers: llvm-commits, jfb
Differential Revision: http://reviews.llvm.org/D11970
llvm-svn: 244779
r242520 was reverted in r244313 as the expected behaviour of the alias
attribute in C is that the alias has the same size as the aliasee. However
we can re-introduce adding the size on the alias when the aliasee does not,
from a source code or object perspective, exist as a discrete entity. This
happens when the aliasee is not a symbol, or when that symbol is private.
Differential Revision: http://reviews.llvm.org/D11943
llvm-svn: 244752
On Mach-O emitting aliases for the variables that make up a MergedGlobals
variable can cause problems when linking with dead stripping enabled so don't
do that, except for external variables where we must emit an alias.
llvm-svn: 244748
This abstracts away the test for "when can we fold across a MachineInstruction"
into the the MI interface, and changes call-frame optimization use the same test
the peephole optimizer users.
Differential Revision: http://reviews.llvm.org/D11945
llvm-svn: 244729
As discussed in D11886, this patch moves the SSE/AVX vector blend folding to instcombiner from PerformINTRINSIC_WO_CHAINCombine (which allows us to remove this completely).
InstCombiner already had partial support for this, I just had to add support for zero (ConstantAggregateZero) masks and also the case where both selection inputs were the same (allowing us to ignore the mask).
I also moved all the relevant combine tests into InstCombine/blend_x86.ll
Differential Revision: http://reviews.llvm.org/D11934
llvm-svn: 244723
For NVPTX, try to use 32-bit division instead of 64-bit division when the dividend and divisor
fit in 32 bits. This speeds up some internal benchmarks significantly. The underlying reason
is that many index computations are carried out in 64-bits but never actually exceed the
capacity of a 32-bit word.
llvm-svn: 244684
Mangled "linkage" names can be huge, and if the debugger (or other
tools) have no use for them, the size savings can be very impressive
(on the order of 40%).
Add one test for controlling behavior, and modify a number of tests to
either stop using linkage names, or make llc emit them (so these tests
will still run when the default triple is for PS4).
Differential Revision: http://reviews.llvm.org/D11374
llvm-svn: 244678
`InstCombiner::OptimizeOverflowCheck` was asserting an
invariant (operands to binary operations are ordered by decreasing
complexity) that wasn't really an invariant. Fix this by instead having
`InstCombiner::OptimizeOverflowCheck` establish the invariant if it does
not hold.
llvm-svn: 244676
Some of the FP comparisons (ueq, one, ult, ule, ugt, uge) are currently broken, I'll fix them in a follow-up.
Reviewers: sunfish
Subscribers: llvm-commits, jfb
Differential Revision: http://reviews.llvm.org/D11924
llvm-svn: 244665
Summary:
For example:
s6 = s0*s5;
s2 = s6*s6 + s6;
...
s4 = s6*s3;
We notice that it is possible for s2 is folded to fma (s0, s5, fmul (s6 s6)).
This only happens when Aggressive is true, otherwise hasOneUse() check
already prevents from folding the multiplication with more uses.
Test Plan: test/CodeGen/NVPTX/fma-assoc.ll
Patch by Xuetian Weng
Reviewers: hfinkel, apazos, jingyue, ohsallen, arsenm
Subscribers: arsenm, jholewinski, llvm-commits
Differential Revision: http://reviews.llvm.org/D11855
llvm-svn: 244649
Summary: LowerSwitch crashed with the attached test case after deleting the default block. This happened because the current implementation of deleting dead blocks is wrong. After the default block being deleted, it contains no instruction or terminator, and it should no be traversed anymore. However, since the iterator is advanced before processSwitchInst() function is executed, the block advanced to could be deleted inside processSwitchInst(). The deleted block would then be visited next and crash dyn_cast<SwitchInst>(Cur->getTerminator()) because Cur->getTerminator() returns a nullptr. This patch fixes this problem by recording dead default blocks into a list, and delete them after all processSwitchInst() has been done. It still possible to visit dead default blocks and waste time process them. But it is a compile time issue, and I plan to have another patch to add support to skip dead blocks.
Reviewers: kariddi, resistor, hans, reames
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D11852
llvm-svn: 244642
Other objects can never reference the MergedGlobals symbol so external linkage
is never needed. Using private instead of internal linkage means the object is
more similar to what it looks like when global merging is not enabled, with
the only difference being that the merged variables are addressed indirectly
relative to the start of the section they are in.
Also add aliases for merged variables with internal linkage, as this also makes
the object be more like what it is when they are not merged.
Differential Revision: http://reviews.llvm.org/D11942
llvm-svn: 244615
I incorrectly wrote CHECK-NEXT with followin with ':', the check was
ignored by FileCheck.
The non-inbound GEP is folded here because the DataLayout is no longer
optional, the fold was originally guarded with a comment that said:
We need TD information to know the pointer size unless this is inbounds.
Now we always have "TD information" and perform the fold.
Thanks Jonathan Roelofs for noticing.
From: Mehdi Amini <mehdi.amini@apple.com>
llvm-svn: 244613
First step in preventing immediates that occur more than once within a single
basic block from being pulled into their users, in order to prevent unnecessary
large instruction encoding .Currently enabled only when optimizing for size.
Patch by: zia.ansari@intel.com
Differential Revision: http://reviews.llvm.org/D11363
llvm-svn: 244601
Lower Intrinsic::aarch64_neon_fmin/fmax to fminnum/fmannum and match that instead. Minimal functional change:
- Extra tests added because coverage of scalar fminnm/fmaxnm instructions was nonexistant.
- f16 test updated because now we actually generate scalar fminnm/fmaxnm we no longer need to bail out to a libcall!
llvm-svn: 244595
REPE, REPZ, REPNZ, REPNE should have mnemonics for Intel syntax as well.
Currently using these instructions causes compilation errors for Intel syntax.
Differential Revision: http://reviews.llvm.org/D11794
llvm-svn: 244584
The "imul reg, imm" alias is not defined for intel syntax.
In intel syntax there is no w/l/q suffix for the imul instruction.
Differential Revision: http://reviews.llvm.org/D11887
llvm-svn: 244582
The select pattern recognition in ValueTracking (as used by InstCombine
and SelectionDAGBuilder) only knew about integer patterns. This teaches
it about minimum and maximum operations.
matchSelectPattern() has been extended to return a struct containing the
existing Flavor and a new enum defining the pattern's behavior when
given one NaN operand.
C minnum() is defined to return the non-NaN operand in this case, but
the idiomatic C "a < b ? a : b" would return the NaN operand.
ARM and AArch64 at least have different instructions for these different cases.
llvm-svn: 244580
Summary:
This patch remaps the assembly idiom 'move' to 'or' instead of 'daddu' or
'addu'. The use of addu/daddu instead of or as move was highlighted as a
performance issue during the analysis of a recent 64bit design. Originally
move was encoded as 'or' by binutils but was changed for the r10k cpu family
due to their pipeline which had 2 arithmetic units and a single logical unit,
and so could issue multiple (d)addu based moves at the same time but only 1
logical move.
This patch preserves the disassembly behaviour so that disassembling a old style
(d)addu move still appears as move, but assembling move always gives an or
Patch by Simon Dardis.
Reviewers: vkalintiris
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D11796
llvm-svn: 244579
When optimizing for size, replace "addl $4, %esp" and "addl $8, %esp"
following a call by one or two pops, respectively. We don't try to do it in
general, but only when the stack adjustment immediately follows a call - which
is the most common case.
That allows taking a short-cut when trying to find a free register to pop into,
instead of a full-blown liveness check. If the adjustment immediately follows a
call, then every register the call clobbers but doesn't define should be dead at
that point, and can be used.
Differential Revision: http://reviews.llvm.org/D11749
llvm-svn: 244578
The condition for clearing the folding candidate list was clamped together
with the "uninteresting instruction" condition. This is too conservative,
e.g. we don't need to clear the list when encountering an IMPLICIT_DEF.
Differential Revision: http://reviews.llvm.org/D11591
llvm-svn: 244577
Summary: I somehow forgot to add these when I added the basic floating-point opcodes. Also remove ceil/floor/trunc/nearestint for now, and add them only when properly tested.
Subscribers: llvm-commits, sunfish, jfb
Differential Revision: http://reviews.llvm.org/D11927
llvm-svn: 244562
This patch and a relatec clang patch solve the problem of having to explicitly enable analysis when specifying a loop hint pragma to get the diagnostics. Passing AlwasyPrint as the pass name (see below) causes the front-end to print the diagnostic if the user has specified '-Rpass-analysis' without an '=<target-pass>’. Users of loop hints can pass that compiler option without having to specify the pass and they will get diagnostics for only those loops with loop hints.
llvm-svn: 244555
Summary: convertToHexString doesn't represent them correctly at this point in time. This is a follow-up to sunfish's suggestion in D11914.
Subscribers: llvm-commits, sunfish, jfb
Differential Revision: http://reviews.llvm.org/D11925
llvm-svn: 244551
This commit serializes the UsedPhysRegMask register mask from the machine
register information class. The mask is serialized as an inverted
'calleeSavedRegisters' mask to keep the output minimal.
This commit also allows the MIR parser to infer this mask from the register
mask operands if the machine function doesn't specify it.
Reviewers: Duncan P. N. Exon Smith
llvm-svn: 244548
This patch moves checking the threshold of runtime pointer checks to the vectorization requirements (late diagnostics) and emits a diagnostic that infroms the user the loop would be vectorized if not for exceeding the pointer-check threshold. Clang will also append the options that can be used to allow vectorization.
llvm-svn: 244523
Summary:
For now output using C99's hexadecimal floating-point representation.
This patch also cleans up how machine operands are printed: instead of special-casing per type of machine instruction, the code now handles operands generically.
Reviewers: sunfish
Subscribers: llvm-commits, jfb
Differential Revision: http://reviews.llvm.org/D11914
llvm-svn: 244520
The PATCHPOINT instructions have a single optional defined register operand,
but the machine verifier can't verify the optional defined register operands.
This commit makes sure that the machine verifier won't report an error when a
PATCHPOINT instruction doesn't have its optional defined register operand.
This change will allow us to enable the machine verifier for the code
generation tests for the patchpoint intrinsics.
Reviewers: Juergen Ributzka
llvm-svn: 244513
Summary:
This makes it so that reports symbolized after the fact with
llvm-symbolizer are more similar to the ones we generate at runtime with
in-process dbghelp.
Reviewers: samsonov
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D11785
llvm-svn: 244512
frame setup instruction.
This commit ensures that the stack map lowering code in FastISel adds an
appropriate number of immediate operands to the frame setup instruction.
The previous code added just one immediate operand, which was fine for a target
like AArch64, but on X86 the ADJCALLSTACKDOWN64 instruction needs two explicit
operands. This caused the machine verifier to report an error when the old code
added just one.
Reviewers: Juergen Ributzka
Differential Revision: http://reviews.llvm.org/D11853
llvm-svn: 244508
NaCl's sandbox doesn't allow PUSHF/POPF out of security concerns (priviledged emulators have forgotten to mask system bits in the past, and EFLAGS's DF bit is a constant source of hilarity). Commit r220529 fixed PR20376 by saving cmpxchg's flags result using EFLAGS, this commit now generated LAHF/SAHF instead, for all of x86 (not just NaCl) because it leads to an overall performance gain over PUSHF/POPF.
As with the previous patch this code generation is pretty bad because it occurs very later, after register allocation, and in many cases it rematerializes flags which were already available (e.g. already in a register through SETE). Fortunately it's somewhat rare that this code needs to fire.
I did [[ https://github.com/jfbastien/benchmark-x86-flags | a bit of benchmarking ]], the results on an Intel Haswell E5-2690 CPU at 2.9GHz are:
| Time per call (ms) | Runtime (ms) | Benchmark |
| 0.000012514 | 6257 | sete.i386 |
| 0.000012810 | 6405 | sete.i386-fast |
| 0.000010456 | 5228 | sete.x86-64 |
| 0.000010496 | 5248 | sete.x86-64-fast |
| 0.000012906 | 6453 | lahf-sahf.i386 |
| 0.000013236 | 6618 | lahf-sahf.i386-fast |
| 0.000010580 | 5290 | lahf-sahf.x86-64 |
| 0.000010304 | 5152 | lahf-sahf.x86-64-fast |
| 0.000028056 | 14028 | pushf-popf.i386 |
| 0.000027160 | 13580 | pushf-popf.i386-fast |
| 0.000023810 | 11905 | pushf-popf.x86-64 |
| 0.000026468 | 13234 | pushf-popf.x86-64-fast |
Clearly `PUSHF`/`POPF` are suboptimal. It doesn't really seems to be worth teaching LLVM about individual flags, at least not for this purpose.
Reviewers: rnk, jvoung, t.p.northover
Subscribers: llvm-commits
Differential revision: http://reviews.llvm.org/D6629
llvm-svn: 244503
As discussed in D11760, this patch moves the (V)PSRA(WD) arithmetic shift-by-constant folding to InstCombine to match the logical shift implementations.
Differential Revision: http://reviews.llvm.org/D11886
llvm-svn: 244495
This patch moves the verification of fast-math to just before vectorization is done. This way we can tell clang to append the command line options would that allow floating-point commutativity. Specifically those are enableing fast-math or specifying a loop hint.
llvm-svn: 244489
Sometimes interleaving is not beneficial, as determined by the cost-model and sometimes it is disabled by a loop hint (by the user). This patch modifies the diagnostic messages to make it clear why interleaving wasn't done.
llvm-svn: 244485
The LDD/STD instructions can load/store a 64bit quantity from/to
memory to/from a consecutive even/odd pair of (32-bit) registers. They
are part of SparcV8, and also present in SparcV9. (Although deprecated
there, as you can store 64bits in one register).
As recommended on llvmdev in the thread "How to enable use of 64bit
load/store for 32bit architecture" from Apr 2015, I've modeled the
64-bit load/store operations as working on a v2i32 type, rather than
making i64 a legal type, but with few legal operations. The latter
does not (currently) work, as there is much code in llvm which assumes
that if i64 is legal, operations like "add" will actually work on it.
The same assumption does not hold for v2i32 -- for vector types, it is
workable to support only load/store, and expand everything else.
This patch:
- Adds a new register class, IntPair, for even/odd pairs of registers.
- Modifies the list of reserved registers, the stack spilling code,
and register copying code to support the IntPair register class.
- Adds support in AsmParser. (note that in asm text, you write the
name of the first register of the pair only. So the parser has to
morph the single register into the equivalent paired register).
- Adds the new instructions themselves (LDD/STD/LDDA/STDA).
- Hooks up the instructions and registers as a vector type v2i32. Adds
custom legalizer to transform i64 load/stores into v2i32 load/stores
and bitcasts, so that the new instructions can actually be
generated, and marks all operations other than load/store on v2i32
as needing to be expanded.
- Copies the unfortunate SelectInlineAsm hack from ARMISelDAGToDAG.
This hack undoes the transformation of i64 operands into two
arbitrarily-allocated separate i32 registers in
SelectionDAGBuilder. and instead passes them in a single
IntPair. (Arbitrarily allocated registers are not useful, asm code
expects to be receiving a pair, which can be passed to ldd/std.)
Also adds a bunch of test cases covering all the bugs I've added along
the way.
Differential Revision: http://reviews.llvm.org/D8713
llvm-svn: 244484
I looked into adding a warning / error for this to FileCheck, but there doesn't
seem to be a good way to avoid it triggering on the instances of it in RUN lines.
llvm-svn: 244481
This change adds the unroll metadata "llvm.loop.unroll.enable" which directs
the optimizer to unroll a loop fully if the trip count is known at compile time, and
unroll partially if the trip count is not known at compile time. This differs from
"llvm.loop.unroll.full" which explicitly does not unroll a loop if the trip count is not
known at compile time.
The "llvm.loop.unroll.enable" is intended to be added for loops annotated with
"#pragma unroll".
llvm-svn: 244466
The scalarizer can cache incorrect entries when walking up a chain of
insertelement instructions. This occurs when it encounters more than one
instruction that it is not actively searching for, as it unconditionally caches
every element it finds. The fix is to only cache the first element that it
isn't searching for so we don't overwrite correct entries.
Reviewers: hfinkel
Differential Revision: http://reviews.llvm.org/D11559
llvm-svn: 244448
PR24139 contains an analysis of poor register allocation. One of the findings
was that when calculating the spill weight, a rematerializable interval once
split is no longer rematerializable. This is because the isRematerializable
check in CalcSpillWeights.cpp does not follow the copies introduced by live
range splitting (after splitting, the live interval register definition is a
copy which is not rematerializable).
Reviewers: qcolombet
Differential Revision: http://reviews.llvm.org/D11686
llvm-svn: 244439
We can only PHI translate instructions. In our attempt to PHI translate
a bitcast, we attempt to translate its operand; however, the operand
might be an argument or a global instead of an instruction. Benignly
bail out when this happens.
This fixes PR24397.
Differential Revision: http://reviews.llvm.org/D11879
llvm-svn: 244418
The pass adds new kernel arguments for image attributes, and
resolves calls to dummy attribute and resource id getter functions.
Patch by: Zoltan Gilian
llvm-svn: 244372
Summary:
With InstAlias, we don't need to print the _e32 portion of the mnemonic
when we print the $dst operand. This change makes it possible to
include vcc in the asm string when we switch VOPC over to having
implicit vcc defs.
Reviewers: arsenm
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D11813
llvm-svn: 244362
Summary: llvm::ConstantFoldTerminator function can convert SwitchInst with single case (and default) to a conditional BranchInst. This patch adds support to preserve make.implicit metadata on this conversion.
Reviewers: sanjoy, weimingz, chenli
Subscribers: mcrosier, llvm-commits
Differential Revision: http://reviews.llvm.org/D11841
llvm-svn: 244348
This patch fixes the sse2/avx2 vector shift by constant instcombine call to correctly deal with the fact that the shift amount is formed from the entire lower 64-bit and not just the lowest element as it currently assumes.
e.g.
%1 = tail call <4 x i32> @llvm.x86.sse2.psrl.d(<4 x i32> %v, <4 x i32> <i32 15, i32 15, i32 15, i32 15>)
In this case, (V)PSRLD doesn't perform a lshr by 15 but in fact attempts to shift by 64424509455 ((15 << 32) | 15) - giving a zero result.
In addition, this review also recognizes shift-by-zero from a ConstantAggregateZero type (PR23821).
Differential Revision: http://reviews.llvm.org/D11760
llvm-svn: 244341
Summary: We were using the SI encoding for VI.
Reviewers: arsenm
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D11812
llvm-svn: 244332
In tree they are only used by llvm-readobj, but it is also used by
https://github.com/mono/CppSharp.
While at it, add some missing error checking.
llvm-svn: 244320
llvm-dsymutil has to be able to process debug info produced by other compilers
which use different line table settings. The testcase wasn't generated by
another compiler, but by a modified clang.
llvm-svn: 244319
Summary:
Port the ReconstructShuffle function from AArch64 to ARM
to handle mismatched incoming types in the BUILD_VECTOR
node.
This fixes an outstanding FIXME in the ReconstructShuffle
code.
Reviewers: t.p.northover, rengolin
Subscribers: aemerson, llvm-commits, rengolin
Differential Revision: http://reviews.llvm.org/D11720
llvm-svn: 244314
Summary: WebAssembly's tablegen instructions have the names WebAssembly expects, but by LLVM convention they're uppercase and suffixed with their type after an underscore. Leave the C++ code that way, but print outt he names WebAssembly expects (lowercase, no type). We could teach tablegen to do this later, maybe by using `!cast<string>(node)` in the .td files.
Reviewers: sunfish
Subscribers: jfb, llvm-commits
Differential Revision: http://reviews.llvm.org/D11776
llvm-svn: 244305
The block address machine operands can reference IR blocks in other functions.
This commit fixes a bug where the references to unnamed IR blocks in other
functions weren't serialized correctly.
llvm-svn: 244299
When we are not emitting the condition for the branch, because the condition is
in another BB or SDAG did the selection for us, then we have to mask the flag in
the register with AND.
This is required when the condition comes from a truncate, because SDAG only
truncates down to a legal size of i32.
This fixes rdar://problem/22161062.
llvm-svn: 244291
This reverts commit r243198 and 243304.
Turns out this wasn't the correct fix for this problem. It works only within
FastISel, but fails when the truncate is selected by SDAG.
llvm-svn: 244287
lld might end up using a small part of this, but it will be in a much
refactored form. For now this unblocks avoiding the full section scan in the
ELFFile constructor.
This also has a (very small) error handling improvement.
llvm-svn: 244282
A dSYM bundle is a file hierarchy that looks slike this:
<bundle name>.dSYM/
Contents/
Info.plist
Resources/
DWARF/
<DWARF file(s)>
This is the default output mode of dsymutil.
llvm-svn: 244270
dsymutil should by default generate dSYM bundles which are filesystem
hierarchies containing the debug info and an additional Info.plist.
Currently llvm-dsymutil emits raw binaries containing the debug info.
This is what we call the 'flat mode'. Add a -f/-flat option that is
supposed to enable that flat mode, but don't wire it for now, only
pass it to the tests that will need it to stay functional once we
do bundle generation by default.
This basically makes this commit NFC and removes the noise from the
actual commit that adds support for bundle generation.
llvm-svn: 244269
Summary: This allows us to consolidate several of the TableGen patterns.
Reviewers: arsenm
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D11602
llvm-svn: 244253
points.
There is an infinite loop that can occur in Shrink Wrapping while searching
for the Save/Restore points.
Part of this search checks whether the save/restore points are located in
different loop nests and if so, uses the (post) dominator trees to find the
immediate (post) dominator blocks. However, if the current block does not have
any immediate (post) dominators then this search will result in an infinite
loop. This can occur in code containing an infinite loop.
The modification checks whether the immediate (post) dominator is different from
the current save/restore block. If it is not, then the search terminates and the
current location is not considered as a valid save/restore point for shrink wrapping.
Phabricator: http://reviews.llvm.org/D11607
llvm-svn: 244247
iisUnmovableInstruction() had a list of instructions hardcoded which are
considered unmovable. The list lacked (at least) an entry for the va_arg
and cmpxchg instructions.
Fix this by introducing a new Instruction::mayBeMemoryDependent()
instead of maintaining another instruction list.
Patch by Matthias Braun <matze@braunis.de>.
Differential Revision: http://reviews.llvm.org/D11577
rdar://problem/22118647
llvm-svn: 244244
Summary: Divide the primitive size in bits by eight so the initial load's alignment is in bytes as expected. Tested with the included unit test.
Reviewers: rengolin, jfb
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D11804
llvm-svn: 244229
This change improves EmitLoweredSelect() so that multiple contiguous CMOV pseudo
instructions with the same (or exactly opposite) conditions get lowered using a single
new basic-block. This eliminates unnecessary extra basic-blocks (and CFG merge points)
when contiguous CMOVs are being lowered.
Patch by: kevin.b.smith@intel.com
Differential Revision: http://reviews.llvm.org/D11428
llvm-svn: 244202
The COFFSymbolRef::isFunctionDefinition() function tests for several conditions
that are not related to whether a symbol is a function, but rather whether
the symbol meets the requirements for a function definition auxiliary record,
which excludes certain symbols such as internal functions and undefined
references. The test we need to determine the symbol type is much simpler:
we only need to compare the complex type against IMAGE_SYM_DTYPE_FUNCTION.
llvm-svn: 244195
This commit implements the initial serialization of the machine operand target
flags. It extends the 'TargetInstrInfo' class to add two new methods that help
to provide text based serialization for the target flags.
This commit can serialize only the X86 target flags, and the target flags for
the other targets will be serialized in the follow-up commits.
Reviewers: Duncan P. N. Exon Smith
llvm-svn: 244185
This reverts commit r244163. The workaround shouldn't be necessary
after r244172, and moreover the commit was slightly buggy as it
dis a simple mkdir without removing the directory first, which could
cause 'File exists' errors.
llvm-svn: 244182
More specifically, make NVPTXISelDAGToDAG able to emit cached loads (LDG) for pointer induction variables.
Also fix latent bug where LDG was not restricted to kernel functions. I believe that this could not be triggered so far since we do not currently infer that a pointer is global outside a kernel function, and only loads of global pointers are considered for cached loads.
llvm-svn: 244166
This option allows to select a subset of the architectures when
performing a universal binary link. The filter is done completely
in the mach-o specific part of the code.
llvm-svn: 244160
Summary:
Emit both DWARF and CodeView if "CodeView" and "Dwarf Version" module
flags are set.
Reviewers: majnemer
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D11756
llvm-svn: 244158
This commit serializes the offset for the following operands: target index,
global address, external symbol, constant pool index, and block address.
llvm-svn: 244157
NAKAMURA Takumi