llvm::tryFoldSPUpdateIntoPushPop assumes its arguments are valid
MachineInstrs. Update ARMFrameLowering::emitPrologue to respect that;
when LastPush==end(), it can't possibly be a push instruction anyway.
llvm-svn: 278880
Summary:
Fix for the upper bound check that was causing a build failure.
Reviewers: olista01, rengolin, t.p.northover
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D23501
llvm-svn: 278789
Summary:
The assembler currently does not check the branch target for CBZ/CBNZ
instructions, which only permit branching forwards with a positive offset. This
adds validation for the branch target to ensure negative PC-relative offsets are
not encoded into the instruction, whether specified as a literal or as an
assembler symbol.
Reviewers: rengolin, t.p.northover
Subscribers: llvm-commits, rengolin
Differential Revision: https://reviews.llvm.org/D23312
llvm-svn: 278788
This currently breaks the greendragon clang-stage1-configure-RA/ and
brotli. It is probably just uncovering a pre-existing problem. Reverting
temporarily to get the buildbots green again. A reduced testcase will
follow shortly.
This reverts commit r278659.
llvm-svn: 278711
Summary:
The assembler currently does not check the branch target for CBZ/CBNZ
instructions, which only permit branching forwards with a positive offset. This
adds validation for the branch target to ensure negative PC-relative offsets are
not encoded into the instruction, whether specified as a literal or as an
assembler symbol.
Reviewers: rengolin, t.p.northover
Subscribers: llvm-commits, rengolin
Differential Revision: https://reviews.llvm.org/D23312
llvm-svn: 278659
Created a Thumb2 predicated pattern matcher that uses Thumb2 and
HasT2ExtractPack and used it to redefine the patterns for sxta{b|h}
and uxta{b|h}. Also used the similar patterns to fill in isel pattern
gaps for the corresponding instructions in the ARM backend.
The patch is mainly changes to tests since most of this functionality
appears not to have been tested.
Differential Revision: https://reviews.llvm.org/D23273
llvm-svn: 278207
This patch adds support for some new relocation models to the ARM
backend:
* Read-only position independence (ROPI): Code and read-only data is accessed
PC-relative. The offsets between all code and RO data sections are known at
static link time. This does not affect read-write data.
* Read-write position independence (RWPI): Read-write data is accessed relative
to the static base register (r9). The offsets between all writeable data
sections are known at static link time. This does not affect read-only data.
These two modes are independent (they specify how different objects
should be addressed), so they can be used individually or together. They
are otherwise the same as the "static" relocation model, and are not
compatible with SysV-style PIC using a global offset table.
These modes are normally used by bare-metal systems or systems with
small real-time operating systems. They are designed to avoid the need
for a dynamic linker, the only initialisation required is setting r9 to
an appropriate value for RWPI code.
I have only added support to SelectionDAG, not FastISel, because
FastISel is currently disabled for bare-metal targets where these modes
would be used.
Differential Revision: https://reviews.llvm.org/D23195
llvm-svn: 278015
Summary: Thumb2 supports encoding immediates with specific patterns into mov.w by splatting the low 8 bits into other bytes.
I'm resubmitting this patch. The test case in the original commit
r277610 does not specify triple, so builds with differnt default triple
will have different output.
This patch fixed trile as thumb-darwin-apple.
Reviewers: john.brawn, jmolloy, bruno
Subscribers: jmolloy, aemerson, rengolin, samparker, llvm-commits
Differential Revision: https://reviews.llvm.org/D23090
llvm-svn: 277865
Summary: Thumb2 supports encoding immediates with specific patterns into mov.w by splatting the low 8 bits into other bytes.
Reviewers: john.brawn, jmolloy
Subscribers: jmolloy, aemerson, rengolin, samparker, llvm-commits
Differential Revision: https://reviews.llvm.org/D23090
llvm-svn: 277610
In this particular example we wouldn't want the smmls anyway (the value is
actually unused), but in general smmls does not provide the required flags
register so if that SUBE result is used we can't replace it.
llvm-svn: 277541
Added (sra (shl x, 16), 16) to the sext_16_node PatLeaf for ARM to
simplify some pattern matching. This has allowed several patterns
for smul* and smla* to be removed as well as making it easier to add
the matching for the corresponding instructions for Thumb2 targets.
Also added two Pat classes that are predicated on Thumb2 with the
hasDSP flag and UseMulOps flags. Updated the smul codegen test with
the wider range of patterns plus the ThumbV6 and ThumbV6T2 targets.
Differential Revision: https://reviews.llvm.org/D22908
llvm-svn: 277450
Summary:
Commit 276701 requires that targets have the DSP extensions to use
certain saturating instructions. This requires some corrections.
For ARM ISA the instructions in question are available in all v6*
architectures.
For Thumb2, the instructions in question are available from v6T2.
SSAT and USAT are part of the base architecture while SSAT16 and
USAT16 require the DSP extensions.
Reviewers: rengolin
Subscribers: aemerson, rengolin, samparker, llvm-commits
Differential Revision: https://reviews.llvm.org/D23010
llvm-svn: 277439
Summary:
The MOV/MOVT instructions being chosen for struct_byval predicates was
conditional only on Thumb2, resulting in an ARM MOV/MOVT instruction
being incorrectly emitted in Thumb1 mode. This is especially apparent
with v8-m.base targets. This patch ensures that Thumb instructions are
emitted in both Thumb modes.
Reviewers: rengolin, t.p.northover
Subscribers: llvm-commits, aemerson, rengolin
Differential Revision: https://reviews.llvm.org/D22865
llvm-svn: 277128
Currently, for ARMCOFFMCAsmInfoMicrosoft, no comment character is set, thus the
idefault, '#', is used.
The hash character doesn't work as comment character in ARM assembly, since '#'
is used for immediate values.
The comment character is set to ';', which is the comment character used by MS
armasm.exe. (The microsoft armasm.exe uses a different directive syntax than
what LLVM currently supports though, similar to ARM's armasm.)
This allows inline assembly with immediate constants to be built (and brings the
assembly output from clang -S closer to being possible to assemble).
A test is added that verifies that ';' is correctly interpreted as comments in
this mode, and verifies that assembling code that includes literal constants
with a '#' works.
Patch by Martin Storsjö.
llvm-svn: 276859
- More informative message when extension name is not an identifier token.
- Stop parsing directive if extension is unknown (avoid duplicate error
messages).
- Report unsupported extensions with a source location, rather than
report_fatal_error.
Differential Revision: https://reviews.llvm.org/D22806
llvm-svn: 276748
This option, compatible with gas's -mimplicit-it, controls the
generation/checking of implicit IT blocks in ARM/Thumb assembly.
This option allows two behaviours that were not possible before:
- When in ARM mode, emit a warning when assembling a conditional
instruction that is not in an IT block. This is enabled with
-mimplicit-it=never and -mimplicit-it=thumb.
- When in Thumb mode, automatically generate IT instructions when an
instruction with a condition code appears outside of an IT block. This
is enabled with -mimplicit-it=thumb and -mimplicit-it=always.
The default option is -mimplicit-it=arm, which matches the existing
behaviour (allow conditional ARM instructions outside IT blocks without
warning, and error if a conditional Thumb instruction is outside an IT
block).
The general strategy for generating IT blocks in Thumb mode is to keep a
small list of instructions which should be in the IT block, and only
emit them when we encounter something in the input which means we cannot
continue the block. This could be caused by:
- A non-predicable instruction
- An instruction with a condition not compatible with the IT block
- The IT block already contains 4 instructions
- A branch-like instruction (including ALU instructions with the PC as
the destination), which cannot appear in the middle of an IT block
- A label (branching into an IT block is not legal)
- A change of section, architecture, ISA, etc
- The end of the assembly file.
Some of these, such as change of section and end of file, are parsed
outside of the ARM asm parser, so I've added a new virtual function to
AsmParser to ensure any previously-parsed instructions have been
emitted. The ARM implementation of this flushes the currently pending IT
block.
We now have to try instruction matching up to 3 times, because we cannot
know if the current IT block is valid before matching, and instruction
matching changes depending on the IT block state (due to the 16-bit ALU
instructions, which set the flags iff not in an IT block). In the common
case of not having an open implicit IT block and the instruction being
matched not needing one, we still only have to run the matcher once.
I've removed the ITState.FirstCond variable, because it does not store
any information that isn't already represented by CurPosition. I've also
updated the comment on CurPosition to accurately describe it's meaning
(which this patch doesn't change).
Differential Revision: https://reviews.llvm.org/D22760
llvm-svn: 276747
The saturation instructions appeared in v6T2, with DSP extensions, but they
were being accepted / generated on any, with the new introduction of the
saturation detection in the back-end. This commit restricts the usage to
DSP-enable only cores.
Fixes PR28607.
llvm-svn: 276701
Some targets, notably AArch64 for ILP32, have different relocation encodings
based upon the ABI. This is an enabling change, so a future patch can use the
ABIName from MCTargetOptions to chose which relocations to use. Tested using
check-llvm.
The corresponding change to clang is in: http://reviews.llvm.org/D16538
Patch by: Joel Jones
Differential Revision: https://reviews.llvm.org/D16213
llvm-svn: 276654
Follow up to r276624. Changes bits 22-20 to be parameters to
instruction class.
Differential Revision: https://reviews.llvm.org/D22562
llvm-svn: 276626
functions so that the size computation is available not only in ConstantIslands
but in other passes as well.
Differential Revision: https://reviews.llvm.org/D22640
llvm-svn: 276399
Retry r275776 (no changes, we suspect the issue was with another commit).
The current logic for handling inline asm operands in DAGToDAGISel interprets
the operands by looking for constants, which should represent the flags
describing the kind of operand we're dealing with (immediate, memory, register
def etc). The operands representing actual data are skipped only if they are
non-const, with the exception of immediate operands which are skipped explicitly
when a flag describing an immediate is found.
The oversight is that memory operands may be const too (e.g. for device drivers
reading a fixed address), so we should explicitly skip the operand following a
flag describing a memory operand. If we don't, we risk interpreting that
constant as a flag, which is definitely not intended.
Fixes PR26038
Differential Revision: https://reviews.llvm.org/D22103
llvm-svn: 276101
Inference of the 'returned' attribute was fixed in r276008, lets try
turning the backend support back on.
This reverts commit r275677.
llvm-svn: 276081
There's not much functional change, but it really is an architectural feature
(on v6T2, v7A, v7R and v7EM) rather than something each CPU implements
individually.
The main functional change is the default behaviour you get when specifying
only "-triple".
llvm-svn: 276013
Recommitting after r274347 was reverted. This patch introduces some
classes to refactor the 3 and 4 register Thumb2 multiplication
instruction descriptions, plus improved tests for some of those
instructions.
Differential Revision: https://reviews.llvm.org/D21929
llvm-svn: 275979
The standard local dynamic model for TLS on ARM systems needs two
relocations:
- R_ARM_TLS_LDM32 (module idx)
- R_ARM_TLS_LDO32 (offset of object from origin of module TLS block)
In GNU style assembler we use symbol(tlsldm) and symbol(tlsldo) to
produce these relocations.
llvm-mc for ARM supports symbol(tlsldo) but does not support symbol(tlsldm).
This patch wires up the existing symbol(tlsldm) to R_ARM_TLS_LDM32.
TLS for ARM is defined in Addenda to, and Errata in, the ABI for the
ARM Architecture
Differential Revision: https://reviews.llvm.org/D22461
llvm-svn: 275977
The current logic for handling inline asm operands in DAGToDAGISel interprets
the operands by looking for constants, which should represent the flags
describing the kind of operand we're dealing with (immediate, memory, register
def etc). The operands representing actual data are skipped only if they are
non-const, with the exception of immediate operands which are skipped explicitly
when a flag describing an immediate is found.
The oversight is that memory operands may be const too (e.g. for device drivers
reading a fixed address), so we should explicitly skip the operand following a
flag describing a memory operand. If we don't, we risk interpreting that
constant as a flag, which is definitely not intended.
Fixes PR26038
Differential Revision: https://reviews.llvm.org/D22103
llvm-svn: 275776
At higher optimization levels, we generate the libcall for DIVREM_Ix, which is
fine: aeabi_{u|i}divmod. At -O0 we generate the one for REM_Ix, which is the
default {u}mod{q|h|s|d}i3.
This commit makes sure that we don't generate REM_Ix calls for ABIs that
don't support them (i.e. where we need to use DIVREM_Ix instead). This is
achieved by bailing out of FastISel, which can't handle non-double multi-reg
returns, and letting the legalization infrastructure expand the REM_Ix calls.
It also updates the divmod-eabi.ll test to run under -O0 as well, and adds some
Windows checks to it to make sure we don't break things for it.
Fixes PR27068
Differential Revision: https://reviews.llvm.org/D21926
llvm-svn: 275773
r275042 reverted function-attribute inference for the 'returned' attribute
because the feature triggered self-hosting failures on ARM and AArch64. James
Molloy determined that the this-return argument forwarding feature, which
directly ties the returned input argument to the returned value, was the cause.
It seems likely that this forwarding code contains, or triggers, a subtle bug.
Disabling for now until we can track that down.
llvm-svn: 275677
Initializing them in LLVMInitializeARMTarget() makes them visible early
enough for "llc -run-pass usage".
This required the pass to be renamed from "arm-load-store-opt" to
"arm-ldst-opt", because there already exists an arm-load-store-opt
cl::opt switch which would now clash with the passname getting added as
a switch in opt. On the bright side the pass name now matches the
DEBUG_TYPE name. Renamed "arm-prera-load-store-opt" to
"arm-repra-ldst-opt" as well for consistency.
llvm-svn: 275661
Summary:
Instead, we take a single flags arg (a bitset).
Also add a default 0 alignment, and change the order of arguments so the
alignment comes before the flags.
This greatly simplifies many callsites, and fixes a bug in
AMDGPUISelLowering, wherein the order of the args to getLoad was
inverted. It also greatly simplifies the process of adding another flag
to getLoad.
Reviewers: chandlerc, tstellarAMD
Subscribers: jholewinski, arsenm, jyknight, dsanders, nemanjai, llvm-commits
Differential Revision: http://reviews.llvm.org/D22249
llvm-svn: 275592
Summary:
Previously we took an unsigned.
Hooray for type-safety.
Reviewers: chandlerc
Subscribers: dsanders, llvm-commits
Differential Revision: http://reviews.llvm.org/D22282
llvm-svn: 275591
Thumb-1 doesn't have post-inc or pre-inc load or store instructions. However the LDM/STM instructions with writeback can function as post-inc load/store:
ldm r0!, {r1} @ load from r0 into r1 and increment r0 by 4
Obviously, this only works if the post increment is 4.
llvm-svn: 275540
... When we emit several calls to the same function in the same basic block.
An indirect call uses a "BLX r0" instruction which has a 16-bit encoding. If many calls are made to the same target, this can enable significant code size reductions.
llvm-svn: 275537
constant hoisting. It not only takes into account the number of uses and the
cost of expressions in which constants appear, but now also the resulting
integer range of the offsets. Thus, the algorithm maximizes the number of uses
within an integer range that will enable more efficient code generation. On
ARM, for example, this will enable code size optimisations because less
negative offsets will be created. Negative offsets/immediates are not supported
by Thumb1 thus preventing more compact instruction encoding.
Differential Revision: http://reviews.llvm.org/D21183
llvm-svn: 275382
Immediate branch targets aren't commonly used, but if they are we should make
sure they can actually be encoded. This means they must be divisible by 2 when
targeting Thumb mode, and by 4 when targeting ARM mode.
Also do a little naming cleanup while I was changing everything around anyway.
llvm-svn: 275116
Remove remaining implicit conversions from MachineInstrBundleIterator to
MachineInstr* from the ARM backend. In most cases, I made them less attractive
by preferring MachineInstr& or using a ranged-based for loop.
Once all the backends are fixed I'll make the operator explicit so that this
doesn't bitrot back.
llvm-svn: 274920
Windows on ARM uses a pure thumb-2 environment. This means that it can select a
high register when doing a __builtin_longjmp. We would use a tLDRi which would
truncate the register to a low register. Use a t2LDRi12 to get the full
register file access. Tweak the code to just load into PC, as that is an
interworking branch on all supported cores anyways.
llvm-svn: 274815
This is a follow-up for r273544.
The end goal is to get rid of the isSwift / isCortexXY / isWhatever methods.
This commit also removes a command line flag that isn't used in any of the tests:
check-vmlx-hazards. It can be replaced easily with the mattr mechanism, since
this is now a subtarget feature.
There is still some work left regarding FeatureExpandMLx. In the past MLx
expansion was enabled for subtargets with hasVFP2(), until r129775 [1] switched
from that to isCortexA9, without too much justification.
In spite of that, the code performing MLx expansion still contains calls to
isSwift/isLikeA9, although the results of those are pretty clear given that
we're only enabling it for the A9.
We should try to enable it for all targets that have FeatureHasVMLxHazards, as
it seems to be closely related to that behaviour, and if that is possible try to
clean up the MLx expansion pass from all calls to isWhatever. This will require
some performance testing, so it will be done in another patch.
[1] http://lists.llvm.org/pipermail/llvm-commits/Week-of-Mon-20110418/119725.html
Differential Revision: http://reviews.llvm.org/D21798
llvm-svn: 274742
This is a follow-up for r273544.
The end goal is to get rid of the isSwift / isCortexXY / isWhatever methods.
This commit also removes two command-line flags that weren't used in any of the
tests: widen-vmovs and swift-partial-update-clearance. The former may be easily
replaced with the mattr mechanism, but the latter may not (as it is a subtarget
property, and not a proper feature).
Differential Revision: http://reviews.llvm.org/D21797
llvm-svn: 274620
This is a follow-up for r273544 and r273853.
The end goal is to get rid of the isSwift / isCortexXY / isWhatever methods.
This commit also marks them as obsolete.
Differential Revision: http://reviews.llvm.org/D21796
llvm-svn: 274616
Not all code-paths set the relocation model to static for Windows. This
currently breaks on Windows ARM with `-mlong-calls` when built with clang.
Loosen the assertion to what it was previously. We would ideally ensure that
all the configuration sets Windows to static relocation model.
llvm-svn: 274570
The important thing I was missing was ensuring newly added constants were kept in topological order. Repositioning the node is correct if the constant is newly added (so it has no topological ordering) but wrong if it already existed - positioning it next in the worklist would break the topological ordering.
Original commit message:
[Thumb] Select a BIC instead of AND if the immediate can be encoded more optimally negated
If an immediate is only used in an AND node, it is possible that the immediate can be more optimally materialized when negated. If this is the case, we can negate the immediate and use a BIC instead;
int i(int a) {
return a & 0xfffffeec;
}
Used to produce:
ldr r1, [CONSTPOOL]
ands r0, r1
CONSTPOOL: 0xfffffeec
And now produces:
movs r1, #255
adds r1, #20 ; Less costly immediate generation
bics r0, r1
llvm-svn: 274543
We were using DAG->getConstant instead of DAG->getTargetConstant. This meant that we could inadvertently increase the use count of a constant if stars aligned, which it did in this testcase. Increasing the use count of the constant could cause ISel to fall over (because DAGToDAG lowering assumed the constant had only one use!)
Original commit message:
[Thumb] Select a BIC instead of AND if the immediate can be encoded more optimally negated
If an immediate is only used in an AND node, it is possible that the immediate can be more optimally materialized when negated. If this is the case, we can negate the immediate and use a BIC instead;
int i(int a) {
return a & 0xfffffeec;
}
Used to produce:
ldr r1, [CONSTPOOL]
ands r0, r1
CONSTPOOL: 0xfffffeec
And now produces:
movs r1, #255
adds r1, #20 ; Less costly immediate generation
bics r0, r1
llvm-svn: 274510
No functional changes. Just created wrapper classes around the 3
and 4 reg mult and mac instruction classes.
Differential Revision: http://reviews.llvm.org/D21549
llvm-svn: 274347
For the most part this simplifies all callers. There were two places in X86 that needed an explicit makeArrayRef to shorten a statically sized array.
llvm-svn: 274337
Change all the methods in LiveVariables that expect non-null
MachineInstr* to take MachineInstr& and update the call sites. This
clarifies the API, and designs away a class of iterator to pointer
implicit conversions.
llvm-svn: 274319
This is a mechanical change to make TargetLowering API take MachineInstr&
(instead of MachineInstr*), since the argument is expected to be a valid
MachineInstr. In one case, changed a parameter from MachineInstr* to
MachineBasicBlock::iterator, since it was used as an insertion point.
As a side effect, this removes a bunch of MachineInstr* to
MachineBasicBlock::iterator implicit conversions, a necessary step
toward fixing PR26753.
llvm-svn: 274287
This is mostly a mechanical change to make TargetInstrInfo API take
MachineInstr& (instead of MachineInstr* or MachineBasicBlock::iterator)
when the argument is expected to be a valid MachineInstr. This is a
general API improvement.
Although it would be possible to do this one function at a time, that
would demand a quadratic amount of churn since many of these functions
call each other. Instead I've done everything as a block and just
updated what was necessary.
This is mostly mechanical fixes: adding and removing `*` and `&`
operators. The only non-mechanical change is to split
ARMBaseInstrInfo::getOperandLatencyImpl out from
ARMBaseInstrInfo::getOperandLatency. Previously, the latter took a
`MachineInstr*` which it updated to the instruction bundle leader; now,
the latter calls the former either with the same `MachineInstr&` or the
bundle leader.
As a side effect, this removes a bunch of MachineInstr* to
MachineBasicBlock::iterator implicit conversions, a necessary step
toward fixing PR26753.
Note: I updated WebAssembly, Lanai, and AVR (despite being
off-by-default) since it turned out to be easy. I couldn't run tests
for AVR since llc doesn't link with it turned on.
llvm-svn: 274189
Summary:
This fixes bug: https://llvm.org/bugs/show_bug.cgi?id=28282
Currently the cost model of constant hoisting checks the bit width of the data type of the constants.
However, the actual immediate value is small enough and not need to be hoisted.
This patch checks for the actual bit width needed for the constant.
Reviewers: t.p.northover, rengolin
Subscribers: aemerson, rengolin, llvm-commits
Differential Revision: http://reviews.llvm.org/D21668
llvm-svn: 274073
This is a follow-up for r273544.
The end goal is to get rid of the isSwift / isCortexXY / isWhatever methods.
Since the ARM backend seems to have quite a lot of calls to these methods, I
intend to submit 5-6 subtarget features at a time, instead of one big lump.
Differential Revision: http://reviews.llvm.org/D21685
llvm-svn: 273853
Summary:
SSAT saturates an integer, making sure that its value lies within
an interval [-k, k]. Since the constant is given to SSAT as the
number of bytes set to one, k + 1 must be a power of 2, otherwise
the optimization is not possible. Also, the select_cc must use <
and > respectively so that they define an interval.
Reviewers: mcrosier, jmolloy, rengolin
Subscribers: aemerson, rengolin, llvm-commits
Differential Revision: http://reviews.llvm.org/D21372
llvm-svn: 273581
Move most of the initializations in ARMSubtarget::initializeEnvironment to
member initializers.
Change suggested by Matthias Braun (see http://reviews.llvm.org/D21432).
llvm-svn: 273556
This is a cleanup commit similar to r271555, but for ARM.
The end goal is to get rid of the isSwift / isCortexXY / isWhatever methods.
Since the ARM backend seems to have quite a lot of calls to these methods, I
intend to submit 5-6 subtarget features at a time, instead of one big lump.
Differential Revision: http://reviews.llvm.org/D21432
llvm-svn: 273544
The setCallee function will set the number of fixed arguments based
on the size of the argument list. The FixedArgs parameter was often
explicitly set to 0, leading to a lack of consistent value for non-
vararg functions.
Differential Revision: http://reviews.llvm.org/D20376
llvm-svn: 273403
TargetLowering and DAGToDAG are used to combine ADDC, ADDE and UMLAL
dags into UMAAL. Selection is split into the two phases because it
is easier to match the two patterns at those different times.
Differential Revision: http://http://reviews.llvm.org/D21461
llvm-svn: 273165
Reduces a bit of code duplication and clarify where we are interested
just on position independence and no the location of the symbol.
llvm-svn: 273164
Recommiting after fixing non-atomic insert to front of SmallVector in
MCAsmLexer.h
Add explicit Comment Token in Assembly Lexing for future support for
outputting explicit comments from inline assembly. As part of this,
CPPHash Directives are now explicitly distinguished from Hash line
comments in Lexer.
Line comments are recorded as EndOfStatement tokens, not Comment tokens
to simplify compatibility with current TargetParsers. This slightly
complicates comment output.
This remove all lexing tasks out of the parser, does minor cleanup
to remove extraneous newlines Asm Output, and some improvements white
space handling.
Reviewers: rtrieu, dwmw2, rnk
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D20009
llvm-svn: 273007
Reapplying patch as it was reverted when it was first
committed because of an assertion failure when the
mrrc2 intrinsic was called in ARM mode. The failure
was happening because the instruction was being built
in ARMISelDAGToDAG.cpp and the tablegen description for
mrrc2 instruction doesn't allow you to use a predicate.
The ARM architecture manuals do say that mrrc2 in ARM
mode can be predicated with AL in assembly but this has
no effect on the encoding of the instruction as the top
4 bits will always be 1111 not 1110 which is the encoding
for the condition AL.
Differential Revision: http://reviews.llvm.org/D21408
llvm-svn: 272982
Add explicit Comment Token in Assembly Lexing for future support for
outputting explicit comments from inline assembly. As part of this,
CPPHash Directives are now explicitly distinguished from Hash line
comments in Lexer.
Line comments are recorded as EndOfStatement tokens, not Comment tokens
to simplify compatibility with current TargetParsers. This slightly
complicates comment output.
This remove all lexing tasks out of the parser, does minor cleanup
to remove extraneous newlines Asm Output, and some improvements white
space handling.
Reviewers: rtrieu, dwmw2, rnk
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D20009
llvm-svn: 272953
The R_ARM_PLT32 relocation is deprecated and is not produced by MC.
This means that the code being deleted is dead from the .o point of
view and was making the .s more confusing.
llvm-svn: 272909
We can only generate immediates up to #510 with a MOV+ADD, not #511, because there's no such instruction as add #256.
Found by Oliver Stannard and csmith!
llvm-svn: 272665
MRRC/MRRC2 instruction writes to two registers. The
intrinsic definition returns a single uint64_t to
represent the write, this is a compact way of
representing a write to two 32 bit registers,
the alternative might have been two return a
struct of 2 uint32_t's but this isn't as nice.
Differential Revision:
llvm-svn: 272544
This used to be free, copying and moving DebugLocs became expensive
after the metadata rewrite. Passing by reference eliminates a ton of
track/untrack operations. No functionality change intended.
llvm-svn: 272512
ReplaceTailWithBranchTo assumed that if an instruction is predicated, it must be part of an IT block. This is not correct for conditional branches.
No testcase as this was triggered by the reverted patch r272017 - test coverage will occur when that patch is re-reverted and there is no known way to trigger this in the meantime.
llvm-svn: 272258
If an immediate is only used in an AND node, it is possible that the immediate can be more optimally materialized when negated. If this is the case, we can negate the immediate and use a BIC instead;
int i(int a) {
return a & 0xfffffeec;
}
Used to produce:
ldr r1, [CONSTPOOL]
ands r0, r1
CONSTPOOL: 0xfffffeec
And now produces:
movs r1, #255
adds r1, #20 ; Less costly immediate generation
bics r0, r1
llvm-svn: 272251
The MSR instructions can write to the CPSR, but we did not model this
fact, so we could emit them in the middle of IT blocks, changing the
condition flags for later instructions in the block.
The tests use two calls to llvm.write_register.i32 because it is valid
to use these instructions at the end of an IT block, which if conversion
does do in some cases. With two calls, the first clobbers the flags, so
a branch has to be used to make the second one conditional.
Differential Revision: http://reviews.llvm.org/D21139
llvm-svn: 272154
As suggested by clang-tidy's performance-unnecessary-copy-initialization.
This can easily hit lifetime issues, so I audited every change and ran the
tests under asan, which came back clean.
llvm-svn: 272126
These instructions end in "S" but are not flag-setting, so they need including
in the list of special cases in the assembly parser.
Differential Revision: http://reviews.llvm.org/D21077
llvm-svn: 272015
A Thumb-2 post-indexed LDR instruction such as:
ldr.w r0, [r1], #4
Can be rewritten as:
ldm.n r1!, {r0}
LDMs can be more expensive than LDRs on some cores, so this has been enabled only in minsize mode.
llvm-svn: 272002
If we have an LDM that uses only low registers and doesn't write to its base register:
ldm.w r0, {r1, r2, r3}
And that base register is dead after the LDM, then we can convert it to writeback form and use a narrow encoding:
ldm.n r0!, {r1, r2, r3}
Obviously, this introduces a new register write and so can cause WAW hazards, so I've enabled it only in minsize mode. This is a code size trick that ARM Compiler 5 ("armcc") does that we don't.
llvm-svn: 272000
The Thumb2 conditional branch B<cond>.W has a different encoding (T3)
to the unconditional branch B.W (T4) as it needs to record <cond>.
As the encoding is different the B<cond>.W is given a different
relocation type.
ELF for the ARM Architecture 4.6.1.6 (Table-13) states that
R_ARM_THM_JUMP19 should be used for B<cond>.W. At present the
MC layer is using the R_ARM_THM_JUMP24 from B.W.
This change makes B<cond>.W use R_ARM_THM_JUMP19 and alters the
existing test that checks for R_ARM_THM_JUMP24 to expect
R_ARM_THM_JUMP19.
llvm-svn: 271997
TLS access requires an offset from the TLS index. The index itself is the
section-relative distance of the symbol. For ARM, the relevant relocation
(IMAGE_REL_ARM_SECREL) is applied as a constant. This means that the value may
not be an immediate and must be lowered into a constant pool. This offset will
not be base relocated. We were previously emitting the actual address of the
symbol which would be base relocated and would therefore be the vaue offset by
the ImageBase + TLS Offset.
llvm-svn: 271974
new instruction to ARM and AArch64 targets and several system registers.
Patch by: Roger Ferrer Ibanez and Oliver Stannard
Differential Revision: http://reviews.llvm.org/D20282
llvm-svn: 271670
forces having special checks in ArmInstPrinter::printInstruction. This
patch addresses this issue.
Not all special checks could be removed: either they involve elaborated
conditions under which the alias is emitted (e.g. ldm/stm on sp may be
pop/push but only if the number of registers is >= 2) or the number
of registers is multivalued (like happens again with ldm/stm) and they
do not match the InstAlias pattern which assumes single-valued operands
in the pattern.
Patch by: Roger Ferrer Ibanez
Differential Revision: http://reviews.llvm.org/D20237
llvm-svn: 271667
This adds an additional matcher to select UBFX(..) from SRL(AND(..)) in
ARMISelDAGToDAG to help with code size.
Patch by David Green.
Differential Revision: http://reviews.llvm.org/D20667
llvm-svn: 271384
Physregs have no associated register class, do not attempt to modify it
in Thumb2InstrInfo::storeRegToStackSlot()/loadFromStackSlot().
llvm-svn: 271339
Added support to map intrinsics
__builtin_arm_{ldc,ldcl,ldc2,ldc2l,stc,stcl,stc2,stc2l}
to their ARM instructions.
Differential Revision: http://reviews.llvm.org/D20564
llvm-svn: 271271
Having an enum member named Default is quite confusing: Is it distinct
from the others?
This patch removes that member and instead uses Optional<Reloc> in
places where we have a user input that still hasn't been maped to the
default value, which is now clear has no be one of the remaining 3
options.
llvm-svn: 269988
Since r207518 they are printed exactly like non-hidden stubs on x86 and
since r207517 on ARM.
This means we can use a single set for all stubs in those platforms.
llvm-svn: 269776
The movw instruction is only available in ARM state for V6T2 and above.
The MOVi16 instruction has requirement HasV6T2 but the InstAlias
for mov rd, imm where the operand is imm0_65535_expr:$imm does not.
This means that movw can incorrectly be used in ARMv4 and ARMv5 by
writing mov rd, 0x1234. The simple fix is to the requirement HasV6T2
to the InstAlias. Tests added to not-armv4.s.
Patch by Peter Smith.
llvm-svn: 269761
It seems that cl will emit the export directives for Windows ARM targets. The
fact that it did this had originally been missed and this functionality was
never implemented. This makes it possible to rely solely on the source code for
indicating what the exported interfaces are and brings us more compatibility
with cl.
llvm-svn: 269574
When setting the frame pointer, the offset from SP is calculated based on the
stack slot it gets allocated, but this slot is in turn based on the order of
the CSR list so that list should match the order we actually save the registers
in. Mostly it did, but in the edge-case of MachO AAPCS targets it was wrong.
llvm-svn: 269459
This change implements the transformation in processInstruction() for the
LDR rt, =expression to MOV rt, expression when the expression can be evaluated
and can fit into the immediate field of the MOV or a MVN.
Across the ARM and Thumb instruction sets there are several cases to consider,
each with a different range of representatble constants.
In ARM we have:
* Modified immediate (All ARM architectures)
* MOVW (v6t2 and above)
In Thumb we have:
* Modified immediate (v6t2, v7m and v8m.mainline)
* MOVW (v6t2, v7m, v8.mainline and v8m.baseline)
* Narrow Thumb MOV that can be used in an IT block (non flag-setting)
If the immediate fits any of the available alternatives then we make the transformation.
Fixes 25722.
Patch by Peter Smith.
llvm-svn: 269354
This change adds a new constant pool kind to ARMOperand. When parsing the
operand for =immediate we create an instance of this operand rather than
creating a constant pool entry and rewriting the operand.
As the new operand kind is only created for ldr rt,= we can make ldr rt,=
an explicit pseudo instruction in ARM, Thumb and Thumb2
The pseudo instruction is expanded in processInstruction(). This creates the
constant pool and transforms the pseudo instruction into a pc-relative ldr to
the constant pool.
There are no functional changes and no modifications needed to existing tests.
Required by the patch that fixes PR25722.
Patch by Peter Smith.
llvm-svn: 269352
Fix "Logic error" warnings of the type "Called C++ object pointer is
null" reported by Clang Static Analyzer.
Patch by Apelete Seketeli.
llvm-svn: 269285
This is a large change, but it's pretty mechanical:
- Where we were returning a node before, call ReplaceNode instead.
- Where we would return null to fall back to another selector, rename
the method to try* and return a bool for success.
- Where we were calling SelectNodeTo, just return afterwards.
Part of llvm.org/pr26808.
llvm-svn: 269258
I'm really not sure why we were in the first place, it's the linker's job to
convert between BL/BLX as necessary. Even worse, using BLX left Thumb calls
that could be locally resolved completely unencodable since all offsets to BLX
are multiples of 4.
rdar://26182344
llvm-svn: 269101
Many files include Passes.h but only a fraction needs to know about the
TargetPassConfig class. Move it into an own header. Also rename
Passes.cpp to TargetPassConfig.cpp while we are at it.
llvm-svn: 269011
(re-apply r268810 as it exposed an uninitialized variable in ARM MFI.
Patch 268868 should fix that.)
Summary:
Currently, when checking if a stack is "BigStack" or not, it doesn't count into spills and arguments. Therefore, LLVM won't reserve spill slot for this actually "BigStack". This may cause scavenger failure.
Reviewers: rengolin
Subscribers: vitalybuka, aemerson, rengolin, tberghammer, danalbert, srhines, llvm-commits
Differential Revision: http://reviews.llvm.org/D19896
llvm-svn: 268869
(this is resubmit of r268529 with minor refactoring. r268529 was reverted
at r268536 due a memory sanitizer failure. I have not been able to
reproduce that failure and I checked all the variable used in my change
but I could not spot an issue. I did some refactoring and see if it will
give a clearer hint)
Summary:
Currently, when checking if a stack is "BigStack" or not, it doesn't count into spills and arguments. Therefore, LLVM won't reserve spill slot for this actually "BigStack". This may cause scavenger failure.
Reviewers: rengolin
Subscribers: vitalybuka, aemerson, rengolin, tberghammer, danalbert, srhines, llvm-commits
Differential Revision: http://reviews.llvm.org/D19896
llvm-svn: 268810
This is a step towards removing the rampant undefined behaviour in
SelectionDAG, which is a part of llvm.org/PR26808.
We rename SelectionDAGISel::Select to SelectImpl and update targets to
match, and then change Select to return void and consolidate the
sketchy behaviour we're trying to get away from there.
Next, we'll update backends to implement `void Select(...)` instead of
SelectImpl and eventually drop the base Select implementation.
llvm-svn: 268693
Given something like:
ldr r0, .LCPI0_0 (== pc-rel var)
add r0, pc
ldr r1, .LCPI0_1 (== pc-rel var)
add r1, pc
we cannot combine the 2 ldr instructions and litpools because they get added to
a different pc to form the correct address. I think the original logic came
from a time when we fused the LDRpci/PICADD instructions into one
pseudo-instruction so the PC was always immediately at-hand. That's no longer
the case.
Should fix general-dynamic TLS access on Linux, and quite possibly other -fPIC
code that relies on litpools (e.g. v6m and -Oz compilations) though trivial
tweaks of the .ll test didn't provoke anything.
llvm-svn: 268662
The code here is recursively Select-ing a new Node to avoid issues
where N is CSE'd during replaceDAGValue and stops being valid. We can
accomplish the same goal in a more principled way by using a
HandleSDNode.
This is essentially a less dodgy fix for PR25733 than the original
attempt back in r255120.
llvm-svn: 268590
Summary:
Currently, when checking if a stack is "BigStack" or not, it doesn't count into spills and arguments. Therefore, LLVM won't reserve spill slot for this actually "BigStack". This may cause scavenger failure.
Reviewers: rengolin
Subscribers: aemerson, rengolin, tberghammer, danalbert, srhines, llvm-commits
Differential Revision: http://reviews.llvm.org/D19896
llvm-svn: 268529
Remove the AddPristinesAndCSRs parameters from
addLiveIns()/addLiveOuts().
We need to respect pristine registers after prologue epilogue insertion,
Seeing that we got this wrong in at least two commits already, we should
rather pay the small price to query MachineFrameInfo for it.
There are three cases that did not set AddPristineAndCSRs to true even
after register allocation:
- ExecutionDepsFix: live-out registers are used as a hint that the
register is used soon. This is not true for pristine registers so
use the new addLiveOutsNoPristines() to maintain this behaviour.
- SystemZShortenInst: Not setting AddPristineAndCSRs to true looks like
a bug, should do the right thing automatically now.
- StackMapLivenessAnalysis: Not adding pristine registers looks like a
bug to me. Added a FIXME comment but maintain the current behaviour
as a change may need to get coordinated with GC runtimes.
llvm-svn: 268336
We were negating an immediate that was going to be used in a SUBri form
unnecessarily. Since ADD/SUB are very similar we *can* do that, but we have to
change the SUB to an ADD at the same time. This also applies to ADD, and allows
us to handle a slightly larger range of immediates for those two operations.
rdar://25992245
llvm-svn: 268276
Summary:
Historically, we had a switch in the Makefiles for turning on "expensive
checks". This has never been ported to the cmake build, but the
(dead-ish) code is still around.
This will also make it easier to turn it on in buildbots.
Reviewers: chandlerc
Subscribers: jyknight, mzolotukhin, RKSimon, gberry, llvm-commits
Differential Revision: http://reviews.llvm.org/D19723
llvm-svn: 268050
transferSuccessors() would LoadCmpBB a successor of DoneBB, whereas
it should be a successor of the original MBB.
The testcase changes are caused by Thumb2SizeReduction, which
was previously confused by the broken CFG.
Follow-up to r266679.
Unfortunately, it's tricky to catch this in the verifier.
llvm-svn: 267778
Summary:
We don't use MinLatency any more since r184032.
Reviewers: atrick, hfinkel, mcrosier
Differential Revision: http://reviews.llvm.org/D19474
llvm-svn: 267502
Summary:
This patch adds support for the X asm constraint.
To do this, we lower the constraint to either a "w" or "r" constraint
depending on the operand type (both constraints are supported on ARM).
Fixes PR26493
Reviewers: t.p.northover, echristo, rengolin
Subscribers: joker.eph, jgreenhalgh, aemerson, rengolin, llvm-commits
Differential Revision: http://reviews.llvm.org/D19061
llvm-svn: 267411
This corrects the MI annotations for the stack adjustment following the __chkstk
invocation. We were marking the original SP usage as a Def rather than Kill.
The (new) assigned value is the definition, the original reference is killed.
Adjust the ISelLowering to mark Kills and FrameSetup as well.
This partially resolves PR27480.
llvm-svn: 267361
The relative vtable ABI (PR26723) needs PLT relocations to refer to virtual
functions defined in other DSOs. The unnamed_addr attribute means that the
function's address is not significant, so we're allowed to substitute it
with the address of a PLT entry.
Also includes a bonus feature: addends for COFF image-relative references.
Differential Revision: http://reviews.llvm.org/D17938
llvm-svn: 267211
WIN__DBZCHK will insert a CBZ instruction into the stream. This instruction
reserves 3 bits for the condition register (rn). As such, we must ensure that
we restrict the register to a low register. Use the tGPR class instead of GPR
to ensure that this is properly constrained. In debug builds, we would attempt
to use lr as a condition register which would silently get truncated with no
hint that the register selection was incorrect.
llvm-svn: 267080
We'd disabled them on x86 because back in the early days some host tools
couldn't handle the new load commands. This no longer holds: anyone capable of
deploying Clang should be able to deploy its copies of ar/ranlib/etc.
rdar://25254790
llvm-svn: 267075
Zijiao Ma