This is a continuation of my quest to make the size 0 a supported value.
This reapplies r352394 with additional PDB parser fixes prepared by
Pavel Labath!
Differential Revision: https://reviews.llvm.org/D57273
llvm-svn: 352521
to reflect the new license.
We understand that people may be surprised that we're moving the header
entirely to discuss the new license. We checked this carefully with the
Foundation's lawyer and we believe this is the correct approach.
Essentially, all code in the project is now made available by the LLVM
project under our new license, so you will see that the license headers
include that license only. Some of our contributors have contributed
code under our old license, and accordingly, we have retained a copy of
our old license notice in the top-level files in each project and
repository.
llvm-svn: 351636
Summary:
If we opened a file which was produced on system with different path
syntax, we would parse the paths from the debug info incorrectly.
The reason for that is that we would parse the paths as they were
native. For example this meant that on linux we would treat the entire
windows path as a single file name with no directory component, and then
we would concatenate that with the single directory component from the
DW_AT_comp_dir attribute. When parsing posix paths on windows, we would
at least get the directory separators right, but we still would treat
the posix paths as relative, and concatenate them where we shouldn't.
This patch attempts to remedy this by guessing the path syntax used in
each compile unit. (Unfortunately, there is no info in DWARF which would
give the definitive path style used by the produces, so guessing is all
we can do.) Currently, this guessing is based on the DW_AT_comp_dir
attribute of the compile unit, but this can be refined later if needed
(for example, the DW_AT_name of the compile unit may also contain some
useful info). This style is then used when parsing the line table of
that compile unit.
This patch is sufficient to make the line tables come out right, and
enable breakpoint setting by file name work correctly. Setting a
breakpoint by full path still has some kinks (specifically, using a
windows-style full path will not work on linux because the path will be
parsed as a linux path), but this will require larger changes in how
breakpoint setting works.
Reviewers: clayborg, zturner, JDevlieghere
Subscribers: aprantl, lldb-commits
Differential Revision: https://reviews.llvm.org/D56543
llvm-svn: 351328
This parameter was only ever used with the Module set, and
since a SymbolFile is tied to a module, the parameter turns
out to be entirely unnecessary. Furthermore, it doesn't make
a lot of sense to ask a caller to ask SymbolFile which is tied
to Module X to find types for Module Y, but that possibility
was open with the previous interface. By removing this
parameter from the API, it makes it harder to use incorrectly
as well as easier for an implementor to understand what it
needs to do.
llvm-svn: 351133
Every callsite was passing an empty SymbolContext, so this parameter
had no effect. Inside the DWARF implementation of this function,
however, there was one codepath that checked members of the
SymbolContext. Since no call-sites actually ever used this
functionality, it was essentially dead code, so I've deleted this
code path as well.
llvm-svn: 351132
This method took a SymbolContext but only actually cared about the
case where the m_function member was set. Furthermore, it was
intended to be implemented to parse blocks recursively despite not
documenting this in its name. So we change the name to indicate
that it should be recursive, while also limiting the function
parameter to be a Function&. This lets the caller know what is
required to use it, as well as letting new implementers know what
kind of inputs they need to be prepared to handle.
llvm-svn: 351131
Previously all of these functions accepted a SymbolContext&.
While a CompileUnit is one member of a SymbolContext, there
are also many others, and by passing such a monolithic parameter
in this way it makes the requirements and assumptions of the
API unclear for both callers as well as implementors.
All these methods need is a CompileUnit. By limiting the
parameter type in this way, we simplify the code as well as
make it self-documenting for both implementers and users.
Differential Revision: https://reviews.llvm.org/D56564
llvm-svn: 350943
The function SymbolFile::ParseTypes previously accepted a SymbolContext.
This makes it extremely difficult to implement faithfully, because you
have to account for all possible combinations of members being set in
the SymbolContext. On the other hand, no clients of this function
actually care about implementing this function to this strict of a
standard. AFAICT, there is actually only 1 client in the entire
codebase, and it is the function ParseAllDebugSymbols, which is itself
only called for testing purposes when dumping information. At this
call-site, the only field it sets is the CompileUnit, meaning that an
implementer of a SymbolFile need not worry about any examining or
handling any other fields which might be set.
By restricting this API to accept exactly a CompileUnit& and nothing
more, we can simplify the life of new SymbolFile plugin implementers by
making it clear exactly what the necessary and sufficient set of
functionality they need to implement is, while at the same time removing
some dead code that tried to handle other types of SymbolContext fields
that were never going to be set anyway.
Differential Revision: https://reviews.llvm.org/D56462
llvm-svn: 350889
Summary:
instead of returning the architecture through by-ref argument and a
boolean value indicating success, we can just return the ArchSpec
directly. Since the ArchSpec already has an invalid state, it can be
used to denote the failure without the additional bool.
Reviewers: clayborg, zturner, espindola
Subscribers: emaste, arichardson, JDevlieghere, lldb-commits
Differential Revision: https://reviews.llvm.org/D56129
llvm-svn: 350291
This patch simplifies boolean expressions acorss LLDB. It was generated
using clang-tidy with the following command:
run-clang-tidy.py -checks='-*,readability-simplify-boolean-expr' -format -fix $PWD
Differential revision: https://reviews.llvm.org/D55584
llvm-svn: 349215
This patch removes the comments grouping header includes. They were
added after running IWYU over the LLDB codebase. However they add little
value, are often outdates and burdensome to maintain.
llvm-svn: 346626
Clang recently improved its DWARF support for C VLA types. The DWARF
now looks like this:
0x00000051: DW_TAG_variable [4]
DW_AT_location( fbreg -32 )
DW_AT_name( "__vla_expr" )
DW_AT_type( {0x000000d3} ( long unsigned int ) )
DW_AT_artificial( true )
...
0x000000da: DW_TAG_array_type [10] *
DW_AT_type( {0x000000cc} ( int ) )
0x000000df: DW_TAG_subrange_type [11]
DW_AT_type( {0x000000e9} ( __ARRAY_SIZE_TYPE__ ) )
DW_AT_count( {0x00000051} )
Without this patch LLDB will naively interpret the DIE offset 0x51 as
the static size of the array, which is clearly wrong. This patch
extends ValueObject::GetNumChildren to query the dynamic properties of
incomplete array types.
See the testcase for an example:
4 int foo(int a) {
5 int vla[a];
6 for (int i = 0; i < a; ++i)
7 vla[i] = i;
8
-> 9 pause(); // break here
10 return vla[a-1];
11 }
(lldb) fr v vla
(int []) vla = ([0] = 0, [1] = 1, [2] = 2, [3] = 3)
(lldb) quit
rdar://problem/21814005
Differential Revision: https://reviews.llvm.org/D53530
llvm-svn: 346165
This is useful for investigating the clang ast as you reconstruct
it via by parsing debug info. It can also be used to write tests
against.
Differential Revision: https://reviews.llvm.org/D54072
llvm-svn: 346149
This patch removes the logic for resolving paths out of FileSpec and
updates call sites to rely on the FileSystem class instead.
Differential revision: https://reviews.llvm.org/D53915
llvm-svn: 345890
This patch removes the Exists method from FileSpec and updates its uses
with calls to the FileSystem.
Differential revision: https://reviews.llvm.org/D53845
llvm-svn: 345854
This patch removes the GetByteSize method from FileSpec and updates its
uses with calls to the FileSystem.
Differential revision: https://reviews.llvm.org/D53788
llvm-svn: 345812
This patch extends the FileSystem class with a bunch of functions that
are currently implemented as methods of the FileSpec class. These
methods will be removed in future commits and replaced by calls to the
file system.
The new functions are operated in terms of the virtual file system which
was recently moved from clang into LLVM so it could be reused in lldb.
Because the VFS is stateful, we turned the FileSystem class into a
singleton.
Differential revision: https://reviews.llvm.org/D53532
llvm-svn: 345783
This is similar to D53597, but following up with 2 more enums.
After this, all flag enums should be strongly typed all the way
through to the symbol files plugins.
Differential Revision: https://reviews.llvm.org/D53616
llvm-svn: 345314
When we get the `resolve_scope` parameter from the SB API, it's a
`uint32_t`. We then pass it through all of LLDB this way, as a uint32.
This is unfortunate, because it means the user of an API never actually
knows what they're dealing with. We can call it something like
`resolve_scope` and have comments saying "this is a value from the
`SymbolContextItem` enumeration, but it makes more sense to just have it
actually *be* the correct type in the actual C++ type system to begin
with. This way the person reading the code just knows what it is.
The reason to use integers instead of enumerations for flags is because
when you do bitwise operations on enumerations they get promoted to
integers, so it makes it tedious to constantly be casting them back
to the enumeration types, so I've introduced a macro to make this
happen magically. By writing LLDB_MARK_AS_BITMASK_ENUM after defining
an enumeration, it will define overloaded operators so that the
returned type will be the original enum. This should address all
the mechanical issues surrounding using rich enum types directly.
This way, we get a better debugger experience, and new users to
the codebase can get more easily acquainted with the codebase because
their IDE features can help them understand what the types mean.
Differential Revision: https://reviews.llvm.org/D53597
llvm-svn: 345313
With the fix: do not forget to hanlde the DW_RLE_start_end, which seems was
omited/forgotten/removed by mistake.
Original commit message:
The patch implements the support for DW_RLE_base_address and DW_RLE_offset_pair
.debug_rnglists entries
Differential revision: https://reviews.llvm.org/D53140
----
Added : /lldb/trunk/lit/Breakpoint/Inputs/debug_rnglist_offset_pair.yaml
Added : /lldb/trunk/lit/Breakpoint/debug_rnglist_offset_pair.test
Modified : /lldb/trunk/source/Plugins/SymbolFile/DWARF/DWARFDebugInfoEntry.cpp
Modified : /lldb/trunk/source/Plugins/SymbolFile/DWARF/DWARFDebugRanges.cpp
Modified : /lldb/trunk/source/Plugins/SymbolFile/DWARF/DWARFDebugRanges.h
Modified : /lldb/trunk/source/Plugins/SymbolFile/DWARF/SymbolFileDWARF.cpp
Modified : /lldb/trunk/source/Plugins/SymbolFile/DWARF/SymbolFileDWARF.h
llvm-svn: 345251
The patch implements the support for DW_RLE_base_address and DW_RLE_offset_pair
.debug_rnglists entries
Differential revision: https://reviews.llvm.org/D53140
llvm-svn: 345127
This implements the support for .debug_loclists section, which is
DWARF 5 version of .debug_loc.
Currently, clang is able to emit it with the use of D53365.
Differential revision: https://reviews.llvm.org/D53436
llvm-svn: 345016
As discussed with Greg at the dev meeting, we need to ensure we have the
module lock in the SymbolFile. Usually the symbol file is accessed
through the symbol vendor which ensures that the necessary locks are
taken. However, there are a few methods that are accessed by the
expression parser and were lacking the lock.
This patch adds the locking where necessary and everywhere else asserts
that we actually already own the lock.
Differential revision: https://reviews.llvm.org/D52543
llvm-svn: 344945
There are several places that call `FindRanges`,
all of them use `Slide` to adjust the ranges found
by the base address.
All except one, which does the same manually in a loop.
Patch updates it to use `Slide` for consistency.
llvm-svn: 344122
This adds a basic support of the .debug_rnglists section.
Only the DW_RLE_start_length and DW_RLE_end_of_list entries are supported.
Differential revision: https://reviews.llvm.org/D52981
llvm-svn: 344119
This patch teaches lldb to detect when there are missing frames in a
backtrace due to a sequence of tail calls, and to fill in the backtrace
with artificial tail call frames when this happens. This is only done
when the execution history can be determined from the call graph and
from the return PC addresses of calls on the stack. Ambiguous sequences
of tail calls (e.g anything involving tail calls and recursion) are
detected and ignored.
Depends on D49887.
Differential Revision: https://reviews.llvm.org/D50478
llvm-svn: 343900
This is a follow-up to https://reviews.llvm.org/D46362.
When evaluating a complex expression in DWARFExpression::Evaluate,
file addresses must be resolved to load addresses before we can
perform operations such as DW_OP_deref on them.
For this the address goes through three steps
1. Read the file address as stored in the DWARF
2. Link/relocate the file address (when reading from a .dSYM, this is a no-op)
3. Convert the file address to a load address.
D46362 implemented step (3) by resolving the file address using the
Module that the original DWARF came from. In the case of a dSYM that
is correct, but when reading from .o files, we need to look up
relocated/linked addresses, so the right place to look them up is the
current frame's module. This patch fixes that by setting the
expression's Module to point to the linked debugmap object.
A word a bout the unorthodox testcase: The motivating testcase for
this fix is in Swift, but I managed to hand-modify LLVM-IR for a
trivial C program to exhibit the same problem, so we can fix this in
llvm.org.
rdar://problem/44689915
Differential Revision: https://reviews.llvm.org/D52678
llvm-svn: 343612
This patch improves the support of DWARF5.
Particularly the reporting of source code locations.
Differential revision: https://reviews.llvm.org/D51935
llvm-svn: 342153
These three classes have no external dependencies, but they are used
from various low-level APIs. Moving them down to Utility improves
overall code layering (although it still does not break any particular
dependency completely).
The XCode project will need to be updated after this change.
Differential Revision: https://reviews.llvm.org/D49740
llvm-svn: 339127
SetFile has an optional style argument which defaulted to the native
style. This patch makes that argument mandatory so clients of the
FileSpec class are forced to think about the correct syntax.
At the same time this introduces a (protected) convenience method to
update the file from within the FileSpec class that keeps the current
style.
These two changes together prevent a potential pitfall where the style
might be forgotten, leading to the path being updated and the style
unintentionally being changed to the host style.
llvm-svn: 334663
With the recent changes in FileSpec to use LLVM's path style, it is
possible to delegate a bunch of common path operations to LLVM's path
helpers. This means we only have to maintain a single implementation and
at the same time can benefit from the efforts made by the rest of the
LLVM community.
This is part one of a set of patches. There was no obvious way to split
this so I just worked from top to bottom.
Differential revision: https://reviews.llvm.org/D48084
llvm-svn: 334615
This also fixes a bug where SymbolFileDWARF was returning the same
function multiple times - this can happen if both mangled and demangled
names match the regex. Other lookup lookup functions had code to handle
this case, but it was forgotten here.
llvm-svn: 334277
Summary:
This patch adds the ability to lookup variables to the DWARF v5 index
class.
During review we discovered an inconsistency between how the existing
two indexes handle looking up qualified names of the variables:
- manual index would return a value if the input string exactly matched
the demangled name of some variable.
- apple index ignored the context and returned any variable with the
same base name.
So, this patch also rectifies that situation:
- it removes all context handling from the index classes. The
GetGlobalVariables functions now just take a base name. For manual
index, this meant we can stop putting demangled names into the
variable index (this matches the behavior for functions).
- context extraction is put into SymbolFileDWARF, so that it is common
to all indexes.
- additional filtering based on the context is also done in
SymbolFileDWARF. This is done via a simple substring search, which is
not ideal, but it matches what we are doing for functions (cf.
Module::LookupInfo::Prune).
Reviewers: clayborg, JDevlieghere
Subscribers: aprantl, lldb-commits
Differential Revision: https://reviews.llvm.org/D47781
llvm-svn: 334181
Summary:
This patch adds the skeleton for implementing the DWARF v5 name index
class. All of the methods are stubbed out and will be implemented in
subsequent patches. The interesting part of the patch is the addition of
a "ignore-file-indexes" setting to the dwarf plugin which enables a
user to force using manual indexing path in lldb (for example as a
debugging aid). I have also added a test that verifies that file indexes
are used by default.
Reviewers: JDevlieghere, clayborg, jingham
Subscribers: mgorny, mehdi_amini, aprantl, lldb-commits
Differential Revision: https://reviews.llvm.org/D47629
llvm-svn: 334088
Now that Apple index determines method-ness straight from the debug
info, we don't need to resolve the functions into SymbolContexts inside
the Index classes. This removes the need for callback arguments and
allows us to pull the common parts out of the two implementations of
these functions back into the SymbolFileDWARF class.
Reviewers: JDevlieghere, clayborg
Subscribers: aprantl, lldb-commits
Differential Revision: https://reviews.llvm.org/D47147
llvm-svn: 334004
Summary:
As discussed in https://bugs.llvm.org/show_bug.cgi?id=37317,
FindGlobalVariables does not properly handle the case where
append=false. As this doesn't seem to be used in the tree, this patch
removes the parameter entirely.
Reviewers: clayborg, jingham, labath
Reviewed By: clayborg
Subscribers: aprantl, lldb-commits, kubamracek, JDevlieghere
Differential Revision: https://reviews.llvm.org/D46885
Patch by Tom Tromey <ttromey@mozilla.com>.
llvm-svn: 333639
As suggested by Pavel Labath in D46810 DWARFUnit::GetUnitDIEOnly() returning
a pointer to m_first_die should not permit using methods like GetFirstChild().
Differential revision: https://reviews.llvm.org/D47276
llvm-svn: 333224
Summary:
This places the `if(m_using_apple_tables)` branches inside the
SymbolFileDWARF class behind an abstract DWARFIndex class. The class
currently has two implementations:
- AppleIndex, which searches using .apple_names and friends
- ManualIndex, which searches using a manually built index
Most of the methods of the class are very simple, and simply extract the
list of DIEs for the given name from the appropriate sub-table. The main
exception are the two GetFunctions overloads, which take a couple of
extra paramenters, including some callbacks. It was not possible to
split these up the same way as other methods, as here we were doing a
lot of post-processing on the results. The post-processing is similar
for the two cases, but not identical. I hope to factor these further in
separate patches.
Other interesting methods are:
- Preload(): do any preprocessing to make lookups faster (noop for
AppleIndex, forces a build of the lookup tables for ManualIndex).
- ReportInvalidDIEOffset(): Used to notify the users of an invalid index
(prints a message for AppleIndex, noop for ManualIndex).
- Dump(): dumps the index state (noop for AppleIndex, prints the lookup
tables for ManualIndex).
Reviewers: clayborg, JDevlieghere
Subscribers: mgorny, aprantl, lldb-commits
Differential Revision: https://reviews.llvm.org/D46889
llvm-svn: 332719
This cleanup is designed to make the https://reviews.llvm.org/D32167 patch smaller and easier to read.
Cleanup in this patch:
Allow DWARFUnit subclasses to hand out the data that should be used when decoding data for a DIE. The information might be in .debug_info or could be in .debug_types. There is a new virtual function on DWARFUnit that each subclass must override:
virtual const lldb_private::DWARFDataExtractor &DWARFUnit::GetData() const;
This allows DWARFCompileUnit and eventually DWARFTypeUnit to hand out different data to be used when decoding the DIE information.
Add a new pure virtual function to get the size of the DWARF unit header:
virtual uint32_t DWARFUnit::GetHeaderByteSize() const = 0;
This allows DWARFCompileUnit and eventually DWARFTypeUnit to hand out different offsets where the first DIE starts when decoding DIE information from the unit.
Added a new function to DWARFDataExtractor to get the size of an offset:
size_t DWARFDataExtractor::GetDWARFSizeOfOffset() const;
Removed dead dumping and parsing code in the DWARFDebugInfo class.
Inlined a bunch of calls in DWARFUnit for accessors that were just returning integer member variables.
Renamed DWARFUnit::Size() to DWARFUnit::GetHeaderByteSize() as it clearly states what it is doing and makes more sense.
Differential Revision: https://reviews.llvm.org/D46606
llvm-svn: 331892
Summary:
Before this patch the two paths were doing very different things
- the apple path searched the .apple_names section, which contained
mangled names, as well as basenames of all functions. It returned any
name it found.
- the non-accelerated path looked in the "full name" index we built
ourselves, which contained mangled as well as demangled names of all
functions (but no basenames). Then however, if it did not find a match
it did an extra search in the basename index, with some special
handling for anonymous namespaces.
This aligns the two paths by changing the non-accelerated path to return
the same results as in the apple-tables one. In pratice, this means we
will search in both the "basename", "method" and "fullname" indexes (in
the manual indexes these are separate indexes. This means the function
will return some slightly inappropriate results (e.g. bar::baz::foo when
one asks for a "full name" foo), but this can be handled by additional
filtering, independently indexing method. I've also stopped inserting
demangled names into the "fullname" index, as that is inconsistent with
the apple path.
Reviewers: clayborg, JDevlieghere
Subscribers: lldb-commits
Differential Revision: https://reviews.llvm.org/D46576
llvm-svn: 331855
In an effort to make the .debug_types patch smaller, breaking out the part that reads the .debug_types from object files into a separate patch
Differential Revision: https://reviews.llvm.org/D46529
llvm-svn: 331777
Adrian Prantl