Summary: Instead use a more reasonable value to start and rely on the fact that SmallString will resize if necessary.
Reviewers: labath, asmith
Reviewed By: labath
Subscribers: lldb-commits
Differential Revision: https://reviews.llvm.org/D55457
llvm-svn: 348775
This patch removes the comments grouping header includes. They were
added after running IWYU over the LLDB codebase. However they add little
value, are often outdates and burdensome to maintain.
llvm-svn: 346626
This patch removes the logic for resolving paths out of FileSpec and
updates call sites to rely on the FileSystem class instead.
Differential revision: https://reviews.llvm.org/D53915
llvm-svn: 345890
This patch removes the Exists method from FileSpec and updates its uses
with calls to the FileSystem.
Differential revision: https://reviews.llvm.org/D53845
llvm-svn: 345854
Summary:
We currently allow any completion handler to read and manipulate the list of matches we
calculated so far. This leads to a few problems:
Firstly, a completion handler's logic can now depend on previously calculated results
by another handlers. No completion handler should have such an implicit dependency,
but the current API makes it likely that this could happen (or already happens). Especially
the fact that some completion handler deleted all previously calculated results can mess
things up right now.
Secondly, all completion handlers have knowledge about our internal data structures with
this API. This makes refactoring this internal data structure much harder than it should be.
Especially planned changes like the support of descriptions for completions are currently
giant patches because we have to refactor every single completion handler.
This patch narrows the contract the CompletionRequest has with the different handlers to:
1. A handler can suggest a completion.
2. A handler can ask how many suggestions we already have.
Point 2 obviously means we still have a dependency left between the different handlers, but
getting rid of this is too large to just append it to this patch.
Otherwise this patch just completely hides the internal StringList to the different handlers.
The CompletionRequest API now also ensures that the list of completions is unique and we
don't suggest the same value multiple times to the user. This property has been so far only
been ensured by the `Option` handler, but is now applied globally. This is part of this patch
as the OptionHandler is no longer able to implement this functionality itself.
Reviewers: jingham, davide, labath
Reviewed By: davide
Subscribers: lldb-commits
Differential Revision: https://reviews.llvm.org/D49322
llvm-svn: 338151
Summary:
As suggested in D48796, this patch replaces even more internal calls that were using the old
completion API style with a single CompletionRequest. In some cases we also pass an option
vector/index, but as we don't always have this information, it currently is not part of the
CompletionRequest class.
The constructor of the CompletionRequest is now also more sensible. You only pass the
user input, cursor position and your list of matches to the request and the rest will be
inferred (using the same code we used before to calculate this). You also have to pass these
match window parameters to it, even though they are unused right now.
The patch shouldn't change any behavior.
Reviewers: jingham
Reviewed By: jingham
Subscribers: lldb-commits
Differential Revision: https://reviews.llvm.org/D48976
llvm-svn: 337031
Summary:
This patch gets rid of the C-string parameter in the RawCommandObject::DoExecute function,
making the code simpler and less memory unsafe.
There seems to be a assumption in some command objects that this parameter could be a nullptr,
but from what I can see the rest of the API doesn't actually allow this (and other command
objects and related code pieces dereference this parameter without any checks).
Especially CommandObjectRegexCommand has error handling code for a nullptr that is now gone.
Reviewers: davide, jingham, teemperor
Reviewed By: teemperor
Subscribers: jingham, lldb-commits
Differential Revision: https://reviews.llvm.org/D49207
llvm-svn: 336955
Summary:
A subset of the LLDB commands follows this command line interface style:
<command name> [arguments] -- <string suffix>
The parsing code for this interface has been so far been duplicated into the different
command objects which makes it hard to maintain and reuse elsewhere.
This patches improves the situation by adding a OptionsWithRaw class that centralizes
the parsing logic and allows easier testing. The different commands now just call this class to
extract the arguments and the raw suffix from the provided user input.
Reviewers: jingham
Reviewed By: jingham
Subscribers: mgorny, lldb-commits
Differential Revision: https://reviews.llvm.org/D49106
llvm-svn: 336723
Summary:
This patch refactors the internal completion API. It now takes (as far as possible) a single
CompletionRequest object instead o half a dozen in/out/in-out parameters. The CompletionRequest
contains a common superset of the different parameters as far as it makes sense. This includes
the raw command line string and raw cursor position, which should make the `expr` command
possible to implement (at least without hacks that reconstruct the command line from the args).
This patch is not intended to change the observable behavior of lldb in any way. It's also as
minimal as possible and doesn't attempt to fix all the problems the API has.
Some Q&A:
Q: Why is this not fixing all the problems in the completion API?
A: Because is a blocker for the expr command completion which I want to get in ASAP. This is the
smallest patch that unblocks the expr completion patch and which allows trivial refactoring in the future.
The patch also doesn't really change the internal information flow in the API, so that hopefully
saves us from ever having to revert and resubmit this humongous patch.
Q: Can we merge all the copy-pasted code in the completion methods
(like computing the current incomplete arg) into CompletionRequest class?
A: Yes, but it's out of scope for this patch.
Q: Why the `word_complete = request.GetWordComplete(); ... ` pattern?
A: I don't want to add a getter that returns a reference to the internal integer. So we have
to use a temporary variable and the Getter/Setter instead. We don't throw exceptions
from what I can tell, so the behavior doesn't change.
Q: Why are we not owning the list of matches?
A: Because that's how the previous API works. But that should be fixed too (in another patch).
Q: Can we make the constructor simpler and compute some of the values from the plain command?
A: I think this works, but I rather want to have this in a follow up commit. Especially when making nested
request it's a bit awkward that the parsed arguments behave as both input/output (as we should in theory
propagate the changes on the nested request back to the parent request if we don't want to change the
behavior too much).
Q: Can't we pass one const request object and then just return another result object instead of mixing
them together in one in/out parameter?
A: It's hard to get keep the same behavior with that pattern, but I think we can also get a nice API with just
a single request object. If we make all input parameters read-only, we have a clear separation between what
is actually an input and what an output parameter (and hopefully we get rid of the in-out parameters).
Q: Can we throw out the 'match' variables that are not implemented according to the comment?
A: We currently just forward them as in the old code to the different methods, even though I think
they are really not used. We can easily remove and readd them once every single completion method just
takes a CompletionRequest, but for now I prefer NFC behavior from the perspective of the API user.
Reviewers: davide, jingham, labath
Reviewed By: jingham
Subscribers: mgorny, friss, lldb-commits
Differential Revision: https://reviews.llvm.org/D48796
llvm-svn: 336146
SetFile has an optional style argument which defaulted to the native
style. This patch makes that argument mandatory so clients of the
FileSpec class are forced to think about the correct syntax.
At the same time this introduces a (protected) convenience method to
update the file from within the FileSpec class that keeps the current
style.
These two changes together prevent a potential pitfall where the style
might be forgotten, leading to the path being updated and the style
unintentionally being changed to the host style.
llvm-svn: 334663
This is intended as a clean up after the big clang-format commit
(r280751), which unfortunately resulted in many of the comment
paragraphs in LLDB being very hard to read.
FYI, the script I used was:
import textwrap
import commands
import os
import sys
import re
tmp = "%s.tmp"%sys.argv[1]
out = open(tmp, "w+")
with open(sys.argv[1], "r") as f:
header = ""
text = ""
comment = re.compile(r'^( *//) ([^ ].*)$')
special = re.compile(r'^((([A-Z]+[: ])|([0-9]+ )).*)|(.*;)$')
for line in f:
match = comment.match(line)
if match and not special.match(match.group(2)):
# skip intentionally short comments.
if not text and len(match.group(2)) < 40:
out.write(line)
continue
if text:
text += " " + match.group(2)
else:
header = match.group(1)
text = match.group(2)
continue
if text:
filled = textwrap.wrap(text, width=(78-len(header)),
break_long_words=False)
for l in filled:
out.write(header+" "+l+'\n')
text = ""
out.write(line)
os.rename(tmp, sys.argv[1])
Differential Revision: https://reviews.llvm.org/D46144
llvm-svn: 331197
Summary:
The Args class is used in plenty of places besides the command
interpreter (e.g., anything requiring an argc+argv combo, such as when
launching a process), so it needs to be in a lower layer. Now that the
class has no external dependencies, it can be moved down to the Utility
module.
This removes the last (direct) dependency from the Host module to
Interpreter, so I remove the Interpreter module from Host's dependency
list.
Reviewers: zturner, jingham, davide
Subscribers: mgorny, lldb-commits
Differential Revision: https://reviews.llvm.org/D45480
llvm-svn: 330200
Summary:
ArchSpec::SetTriple was taking a Platform as an argument, and used it to
fill in missing pieces of the specified triple. I invert the dependency
by moving this code to other classes. For this purpose, I've created
three new functions.
- HostInfo::GetAugmentedArchSpec: fills in the triple using the host
platform (this used to be implemented by passing a null platform
pointer). By putting this code in the Host module, we can provide a
way to anyone who does not have a platform instance (lldb-server) an
easy way to get Host data.
- Platform::GetAugmentedArchSpec: if you have a platform instance, you
can call this to let it fill in the triple.
- static Platform::GetAugmentedArchSpec: implements the "if platform ==
0 then use_host() else use_platform()" part.
Reviewers: zturner, jingham, clayborg
Subscribers: mgorny, javed.absar, lldb-commits
Differential Revision: https://reviews.llvm.org/D39387
llvm-svn: 316987
This renames the LLDB error class to Status, as discussed
on the lldb-dev mailing list.
A change of this magnitude cannot easily be done without
find and replace, but that has potential to catch unwanted
occurrences of common strings such as "Error". Every effort
was made to find all the obvious things such as the word "Error"
appearing in a string, etc, but it's possible there are still
some lingering occurences left around. Hopefully nothing too
serious.
llvm-svn: 302872
Summary:
I originally set out to move the NameMatches closer to the relevant
function and add some unit tests. However, in the process I've found a
couple of bugs in the implementation:
- the early exits where not always correct:
- (test==pattern) does not mean the match will always suceed because
of regular expressions
- pattern.empty() does not mean the match will fail because the "" is
a valid prefix of any string
So I cleaned up those and added some tests. The only tricky part here
was that regcomp() implementation on darwin did not recognise the empty
string as a regular expression and returned an REG_EMPTY error instead.
The simples fix here seemed to be to replace the empty expression with
an equivalent non-empty one.
Reviewers: clayborg, zturner
Subscribers: mgorny, lldb-commits
Differential Revision: https://reviews.llvm.org/D30094
llvm-svn: 295651
Summary:
The std::call_once implementation in libstdc++ has problems on few systems: NetBSD, OpenBSD and Linux PPC. LLVM ships with a homegrown implementation llvm::call_once to help on these platforms.
This change is required in the NetBSD LLDB port. std::call_once with libstdc++ results with crashing the debugger.
Sponsored by <The NetBSD Foundation>
Reviewers: labath, joerg, emaste, mehdi_amini, clayborg
Reviewed By: labath, clayborg
Subscribers: #lldb
Tags: #lldb
Differential Revision: https://reviews.llvm.org/D29288
llvm-svn: 294202
This is better for a number of reasons. Mostly style, but also:
1) Signed-unsigned comparison warnings disappear since there is
no loop index.
2) Iterating with the range-for style gives you back an entry
that has more than just a const char*, so it's more efficient
and more useful.
3) Makes code safter since the type system enforces that it's
impossible to index out of bounds.
llvm-svn: 283413
This change is very mechanical. All it does is change the
signature of `Options::GetDefinitions()` and `OptionGroup::
GetDefinitions()` to return an `ArrayRef<OptionDefinition>`
instead of a `const OptionDefinition *`. In the case of the
former, it deletes the sentinel entry from every table, and
in the case of the latter, it removes the `GetNumDefinitions()`
method from the interface. These are no longer necessary as
`ArrayRef` carries its own length.
In the former case, iteration was done by using a sentinel
entry, so there was no knowledge of length. Because of this
the individual option tables were allowed to be defined below
the corresponding class (after all, only a pointer was needed).
Now, however, the length must be known at compile time to
construct the `ArrayRef`, and as a result it is necessary to
move every option table before its corresponding class. This
results in this CL looking very big, but in terms of substance
there is not much here.
Differential revision: https://reviews.llvm.org/D24834
llvm-svn: 282188
This patch also marks the const char* versions as =delete to prevent
their use. This has the potential to cause build breakages on some
platforms which I can't compile. I have tested on Windows, Linux,
and OSX. Best practices for fixing broken callsites are outlined in
Args.h in a comment above the deleted function declarations.
Eventually we can remove these =delete declarations, but for now they
are important to make sure that all implicit conversions from
const char * are manually audited to make sure that they do not invoke a
conversion from nullptr.
llvm-svn: 281919
*** to conform to clang-format’s LLVM style. This kind of mass change has
*** two obvious implications:
Firstly, merging this particular commit into a downstream fork may be a huge
effort. Alternatively, it may be worth merging all changes up to this commit,
performing the same reformatting operation locally, and then discarding the
merge for this particular commit. The commands used to accomplish this
reformatting were as follows (with current working directory as the root of
the repository):
find . \( -iname "*.c" -or -iname "*.cpp" -or -iname "*.h" -or -iname "*.mm" \) -exec clang-format -i {} +
find . -iname "*.py" -exec autopep8 --in-place --aggressive --aggressive {} + ;
The version of clang-format used was 3.9.0, and autopep8 was 1.2.4.
Secondly, “blame” style tools will generally point to this commit instead of
a meaningful prior commit. There are alternatives available that will attempt
to look through this change and find the appropriate prior commit. YMMV.
llvm-svn: 280751
easier to scan a set of options with a relatively large number of positional
arguments. This commit standardizes their formatting throughout LLDB and
applies surrounding directives to exempt them from being formatted by
clang-format.
These kinds of exemptions should be rare cases that benefit significantly
from alternative formatting. They also imply a long-term obligation to
maintain their format since the automated tools will not do so.
llvm-svn: 279882
Options used to store a reference to the CommandInterpreter instance
in the base Options class. This made it impossible to parse options
independent of a CommandInterpreter.
This change removes the reference from the base class. Instead, it
modifies the options-parsing-related methods to take an
ExecutionContext pointer, which the options may inspect if they need
to do so.
Closes https://reviews.llvm.org/D23416
Reviewers: clayborg, jingham
llvm-svn: 278440
review it for consistency, accuracy, and clarity. These changes attempt to
address all of the above while keeping the text relatively terse.
<rdar://problem/24868841>
llvm-svn: 275485
The standard remote debugging workflow with gdb is to start the
application on the remote host under gdbserver (e.g.: gdbserver :5039
a.out) and then connect to it with gdb.
The same workflow is supported by debugserver/lldb-gdbserver with a very
similar syntax but to access all features of lldb we need to be
connected also to an lldb-platform instance running on the target.
Before this change this had to be done manually with starting a separate
lldb-platform on the target machine and then connecting to it with lldb
before connecting to the process.
This change modifies the behavior of "platform connect" with
automatically connecting to the process instance if it was started by
the remote platform. With this command replacing gdbserver in a gdb
based worflow is usually as simple as replacing the command to execute
gdbserver with executing lldb-platform.
Differential revision: http://reviews.llvm.org/D14952
llvm-svn: 255016
Summary:
This removes all uses of virtual on functions
where override could be used, including on destructors.
It also adds override where virtual was previously
missing.
Reviewers: clayborg, labath
Subscribers: lldb-commits
Differential Revision: http://reviews.llvm.org/D13503
llvm-svn: 249564
Existing commands supplying this type of help content have been reworked to take advantage of the changes. In addition to formatting changes, content was changes for accuracy and clarity purposes.
<rdar://problem/21269977>
llvm-svn: 242122
Summary:
This should solve the issue of sending denormalized paths over gdb-remote
if we stick to GetPath(false) in GDBRemoteCommunicationClient, and let the
server handle any denormalization.
Reviewers: ovyalov, zturner, vharron, clayborg
Reviewed By: clayborg
Subscribers: tberghammer, emaste, lldb-commits
Differential Revision: http://reviews.llvm.org/D9728
llvm-svn: 238604
Since interaction with the python interpreter is moving towards
being more isolated, we won't be able to include this header from
normal files anymore, all includes of it should be localized to
the python library which will live under source/bindings/API/Python
after a future patch.
None of the files that were including this header actually depended
on it anyway, so it was just a dead include in every single instance.
llvm-svn: 238581
This works for Python commands defined via a class (implement get_flags on your class) and C++ plugin commands (which can call SBCommand::GetFlags()/SetFlags())
Flags allow features such as not letting the command run if there's no target, or if the process is not stopped, ...
Commands could always check for these things themselves, but having these accessible via flags makes custom commands more consistent with built-in ones
llvm-svn: 238286
Summary: It should default to working-dir/src-filename if dst is not specified.
Reviewers: clayborg, flackr
Reviewed By: flackr
Subscribers: lldb-commits
Differential Revision: http://reviews.llvm.org/D9890
llvm-svn: 237831
Summary:
Presently Args::SetCommandString allows quotes to be escaped with backslash. However, the
backslash itself is not removed from the argument, nor there is a way to escape the backslash
itself. This leads to surprising results:
"a b" c" -> 'a b', 'c' # Here we actually have an unterminated quote, but that is ignored
"a b\" c" -> 'a b\" c' # We try to escape the quote. That works but the backslash is not removed.
"a b\\" c" -> 'a b\\" c' # Escaping the backslash has no effect.
This change changes quote handling to be more shell-like:
- single quotes and backquotes are literal and there is no way to escape the closing quote or
anything else inside;
- inside double quotes you can use backslash to escape the closing quote and another backslash
- outside any quotes, you can use backslash to escape quotes, spaces and itself.
This makes the parsing more consistent with what the user is familiar and increases the
probability that pasting the command line from shell to the "process launch" command "just work".
Reviewers: clayborg
Subscribers: lldb-commits
Differential Revision: http://reviews.llvm.org/D7855
llvm-svn: 230955
redirecting output to a path that will work well on host or target.
copying file from output location to location on local host that
test will read from
llvm-svn: 228217
Make sure the selected platform is always used
Make sure that the host uses the connect://hostname to connect to both
the lldb-platform and the lldb-gdbserver rather than what the platform
reports as the hostname of the lldb-gdbserver
Make sure that lldb-platform uses the IP address on it's connection
back to the host instead of the hostname that the host sends to it
when launching lldb-gdbserver with the remote host information
Tested on OSX and Linux
llvm-svn: 226712
The refactor was motivated by some comments that Greg made
http://reviews.llvm.org/D6918
and also to break a dependency cascade that caused functions linking
in string->int conversion functions to pull in most of lldb
llvm-svn: 226199
Fixed include:
- Change Platform::ResolveExecutable(...) to take a ModuleSpec instead of a FileSpec + ArchSpec to help resolve executables correctly when we have just a path + UUID (no arch).
- Add the ability to set the listener in SBLaunchInfo and SBAttachInfo in case you don't want to use the debugger as the default listener.
- Modified all places that use the SBLaunchInfo/SBAttachInfo and the internal ProcessLaunchInfo/ProcessAttachInfo to not take a listener as a parameter since it is in the launch/attach info now
- Load a module's sections by default when removing a module from a target. Since we create JIT modules for expressions and helper functions, we could end up with stale data in the section load list if a module was removed from the target as the section load list would still have entries for the unloaded module. Target now has the following functions to help unload all sections a single or multiple modules:
size_t
Target::UnloadModuleSections (const ModuleList &module_list);
size_t
Target::UnloadModuleSections (const lldb::ModuleSP &module_sp);
llvm-svn: 222167
Changes include:
- fix it so you can select the "host" platform using "platform select host"
- change all callbacks that create platforms to returns shared pointers
- fix TestImageListMultiArchitecture.py to restore the "host" platform by running "platform select host"
- Add a new "PlatformSP Platform::Find(const ConstString &name)" method to get a cached platform
- cache platforms that are created and re-use them instead of always creating a new one
llvm-svn: 218145
This reverses out the options validators changes. We'll get these
back in once the changes to the output can be resolved.
Restores broken tests on FreeBSD, Linux, MacOSX.
Changes reverted: r212500, r212317, r212290.
llvm-svn: 212543
Windows uses a different process security model and does not have
a concept of process UID or GID. This patch makes these options
invalid on Windows. Attempting to specify these options when the
current platform is Windows will generate an error.
Reviewed by: Jim Ingham
Differential Revision: http://reviews.llvm.org/D4373
llvm-svn: 212500
The purpose of the OptionValidator is to determine, based on some
arbitrary set of conditions, whether or not a command option is
valid for a given debugger state. An example of this might be
to selectively disable or enable certain command options that
don't apply to a particular platform.
This patch contains no functional change, and does not actually
make use of an OptionValidator for any purpose yet. A follow-up
patch will begin to add the logic and users of OptionValidator.
Reviewed by: Greg Clayton, Jim Ingham
Differential Revision: http://reviews.llvm.org/D4369
llvm-svn: 212290
Example code:
remote_platform = lldb.SBPlatform("remote-macosx");
remote_platform.SetWorkingDirectory("/private/tmp")
debugger.SetSelectedPlatform(remote_platform)
connect_options = lldb.SBPlatformConnectOptions("connect://localhost:1111");
err = remote_platform.ConnectRemote(connect_options)
if err.Success():
print >> result, 'Connected to remote platform:'
print >> result, 'hostname: %s' % (remote_platform.GetHostname())
src = lldb.SBFileSpec("/Applications/Xcode.app/Contents/SharedFrameworks/LLDB.framework", False)
dst = lldb.SBFileSpec()
# copy src to platform working directory since "dst" is empty
err = remote_platform.Install(src, dst);
if err.Success():
print >> result, '%s installed successfully' % (src)
else:
print >> result, 'error: failed to install "%s": %s' % (src, err)
Implemented many calls needed in lldb-platform to be able to install a directory that contains symlinks, file and directories.
The remote lldb-platform can now launch GDB servers on the remote system so that remote debugging can be spawned through the remote platform when connected to a remote platform.
The API in SBPlatform is subject to change and will be getting many new functions.
llvm-svn: 195273
- add default timeout of 10s (unil qPlatform_RunCommand supports timeout packets and CommandObjectPlatform is updated to read a timeout flag/setting)
- add a few tests for platform shell
llvm-svn: 189405
Summary:
This merge brings in the improved 'platform' command that knows how to
interface with remote machines; that is, query OS/kernel information, push
and pull files, run shell commands, etc... and implementation for the new
communication packets that back that interface, at least on Darwin based
operating systems via the POSIXPlatform class. Linux support is coming soon.
Verified the test suite runs cleanly on Linux (x86_64), build OK on Mac OS
X Mountain Lion.
Additional improvements (not in the source SVN branch 'lldb-platform-work'):
- cmake build scripts for lldb-platform
- cleanup test suite
- documentation stub for qPlatform_RunCommand
- use log class instead of printf() directly
- reverted work-in-progress-looking changes from test/types/TestAbstract.py that work towards running the test suite remotely.
- add new logging category 'platform'
Reviewers: Matt Kopec, Greg Clayton
Review: http://llvm-reviews.chandlerc.com/D1493
llvm-svn: 189295
<rdar://problem/13594769>
Main changes in this patch include:
- cleanup plug-in interface and use ConstStrings for plug-in names
- Modfiied the BSD Archive plug-in to be able to pick out the correct .o file when .a files contain multiple .o files with the same name by using the timestamp
- Modified SymbolFileDWARFDebugMap to properly verify the timestamp on .o files it loads to ensure we don't load updated .o files and cause problems when debugging
The plug-in interface changes:
Modified the lldb_private::PluginInterface class that all plug-ins inherit from:
Changed:
virtual const char * GetPluginName() = 0;
To:
virtual ConstString GetPluginName() = 0;
Removed:
virtual const char * GetShortPluginName() = 0;
- Fixed up all plug-in to adhere to the new interface and to return lldb_private::ConstString values for the plug-in names.
- Fixed all plug-ins to return simple names with no prefixes. Some plug-ins had prefixes and most ones didn't, so now they all don't have prefixed names, just simple names like "linux", "gdb-remote", etc.
llvm-svn: 181631
from the current Target, if there is one, else back off to getting
the currently selected platform from the Debugger (as it ws doing
previously.)
Remove code from DynamicLoaderDarwinKernel that was setting the platform
in both the Target and in the Debugger.
llvm-svn: 178836
Major fixed to allow reading files that are over 4GB. The main problems were that the DataExtractor was using 32 bit offsets as a data cursor, and since we mmap all of our object files we could run into cases where if we had a very large core file that was over 4GB, we were running into the 4GB boundary.
So I defined a new "lldb::offset_t" which should be used for all file offsets.
After making this change, I enabled warnings for data loss and for enexpected implicit conversions temporarily and found a ton of things that I fixed.
Any functions that take an index internally, should use "size_t" for any indexes and also should return "size_t" for any sizes of collections.
llvm-svn: 173463
enum
{
//----------------------------------------------------------------------
// eFlagRequiresTarget
//
// Ensures a valid target is contained in m_exe_ctx prior to executing
// the command. If a target doesn't exist or is invalid, the command
// will fail and CommandObject::GetInvalidTargetDescription() will be
// returned as the error. CommandObject subclasses can override the
// virtual function for GetInvalidTargetDescription() to provide custom
// strings when needed.
//----------------------------------------------------------------------
eFlagRequiresTarget = (1u << 0),
//----------------------------------------------------------------------
// eFlagRequiresProcess
//
// Ensures a valid process is contained in m_exe_ctx prior to executing
// the command. If a process doesn't exist or is invalid, the command
// will fail and CommandObject::GetInvalidProcessDescription() will be
// returned as the error. CommandObject subclasses can override the
// virtual function for GetInvalidProcessDescription() to provide custom
// strings when needed.
//----------------------------------------------------------------------
eFlagRequiresProcess = (1u << 1),
//----------------------------------------------------------------------
// eFlagRequiresThread
//
// Ensures a valid thread is contained in m_exe_ctx prior to executing
// the command. If a thread doesn't exist or is invalid, the command
// will fail and CommandObject::GetInvalidThreadDescription() will be
// returned as the error. CommandObject subclasses can override the
// virtual function for GetInvalidThreadDescription() to provide custom
// strings when needed.
//----------------------------------------------------------------------
eFlagRequiresThread = (1u << 2),
//----------------------------------------------------------------------
// eFlagRequiresFrame
//
// Ensures a valid frame is contained in m_exe_ctx prior to executing
// the command. If a frame doesn't exist or is invalid, the command
// will fail and CommandObject::GetInvalidFrameDescription() will be
// returned as the error. CommandObject subclasses can override the
// virtual function for GetInvalidFrameDescription() to provide custom
// strings when needed.
//----------------------------------------------------------------------
eFlagRequiresFrame = (1u << 3),
//----------------------------------------------------------------------
// eFlagRequiresRegContext
//
// Ensures a valid register context (from the selected frame if there
// is a frame in m_exe_ctx, or from the selected thread from m_exe_ctx)
// is availble from m_exe_ctx prior to executing the command. If a
// target doesn't exist or is invalid, the command will fail and
// CommandObject::GetInvalidRegContextDescription() will be returned as
// the error. CommandObject subclasses can override the virtual function
// for GetInvalidRegContextDescription() to provide custom strings when
// needed.
//----------------------------------------------------------------------
eFlagRequiresRegContext = (1u << 4),
//----------------------------------------------------------------------
// eFlagTryTargetAPILock
//
// Attempts to acquire the target lock if a target is selected in the
// command interpreter. If the command object fails to acquire the API
// lock, the command will fail with an appropriate error message.
//----------------------------------------------------------------------
eFlagTryTargetAPILock = (1u << 5),
//----------------------------------------------------------------------
// eFlagProcessMustBeLaunched
//
// Verifies that there is a launched process in m_exe_ctx, if there
// isn't, the command will fail with an appropriate error message.
//----------------------------------------------------------------------
eFlagProcessMustBeLaunched = (1u << 6),
//----------------------------------------------------------------------
// eFlagProcessMustBePaused
//
// Verifies that there is a paused process in m_exe_ctx, if there
// isn't, the command will fail with an appropriate error message.
//----------------------------------------------------------------------
eFlagProcessMustBePaused = (1u << 7)
};
Now each command object contains a "ExecutionContext m_exe_ctx;" member variable that gets initialized prior to running the command. The validity of the target objects in m_exe_ctx are checked to ensure that any target/process/thread/frame/reg context that are required are valid prior to executing the command. Each command object also contains a Mutex::Locker m_api_locker which gets used if eFlagTryTargetAPILock is set. This centralizes a lot of checking code that was previously and inconsistently implemented across many commands.
llvm-svn: 171990
- add new header lldb-python.h to be included before other system headers
- short term fix (eventually python dependencies must be cleaned up)
Patch by Matt Kopec!
llvm-svn: 169341
Cleaned up the option parsing code to always pass around the short options as integers. Previously we cast this down to "char" and lost some information. I recently added an assert that would detect duplicate short character options which was firing during the test suite.
This fix does the following:
- make sure all short options are treated as "int"
- make sure that short options can be non-printable values when a short option is not required or when an option group is mixed into many commands and a short option is not desired
- fix the help printing to "do the right thing" in all cases. Previously if there were duplicate short character options, it would just not emit help for the duplicates
- fix option parsing when there are duplicates to parse options correctly. Previously the option parsing, when done for an OptionGroup, would just start parsing options incorrectly by omitting table entries and it would end up setting the wrong option value
llvm-svn: 169189
LLDB changes argv[0] when debugging a symlink. Now we have the notion of argv0 in the target settings:
target.arg0 (string) =
There is also the program argument that are separate from the first argument that have existed for a while:
target.run-args (arguments) =
When running "target create <exe>", we will place the untouched "<exe>" into target.arg0 to ensure when we run, we run with what the user typed. This has been added to the ProcessLaunchInfo and all other needed places so we always carry around the:
- resolved executable path
- argv0
- program args
Some systems may not support separating argv0 from the resolved executable path and the ProcessLaunchInfo needs to carry all of this information along so that each platform can make that decision.
llvm-svn: 166137
Make breakpoint setting by file and line much more efficient by only looking for inlined breakpoint locations if we are setting a breakpoint in anything but a source implementation file. Implementing this complex for a many reasons. Turns out that parsing compile units lazily had some issues with respect to how we need to do things with DWARF in .o files. So the fixes in the checkin for this makes these changes:
- Add a new setting called "target.inline-breakpoint-strategy" which can be set to "never", "always", or "headers". "never" will never try and set any inlined breakpoints (fastest). "always" always looks for inlined breakpoint locations (slowest, but most accurate). "headers", which is the default setting, will only look for inlined breakpoint locations if the breakpoint is set in what are consudered to be header files, which is realy defined as "not in an implementation source file".
- modify the breakpoint setting by file and line to check the current "target.inline-breakpoint-strategy" setting and act accordingly
- Modify compile units to be able to get their language and other info lazily. This allows us to create compile units from the debug map and not have to fill all of the details in, and then lazily discover this information as we go on debuggging. This is needed to avoid parsing all .o files when setting breakpoints in implementation only files (no inlines). Otherwise we would need to parse the .o file, the object file (mach-o in our case) and the symbol file (DWARF in the object file) just to see what the compile unit was.
- modify the "SymbolFileDWARFDebugMap" to subclass lldb_private::Module so that the virtual "GetObjectFile()" and "GetSymbolVendor()" functions can be intercepted when the .o file contenst are later lazilly needed. Prior to this fix, when we first instantiated the "SymbolFileDWARFDebugMap" class, we would also make modules, object files and symbol files for every .o file in the debug map because we needed to fix up the sections in the .o files with information that is in the executable debug map. Now we lazily do this in the DebugMapModule::GetObjectFile()
Cleaned up header includes a bit as well.
llvm-svn: 162860
- no setting auto completion
- very manual and error prone way of getting/setting variables
- tons of code duplication
- useless instance names for processes, threads
Now settings can easily be defined like option values. The new settings makes use of the "OptionValue" classes so we can re-use the option value code that we use to set settings in command options. No more instances, just "does the right thing".
llvm-svn: 162366
Execute which was never going to get run and another ExecuteRawCommandString. Took the knowledge of how
to prepare raw & parsed commands out of CommandInterpreter and put it in CommandObject where it belongs.
Also took all the cases where there were the subcommands of Multiword commands declared in the .h file for
the overall command and moved them into the .cpp file.
Made the CommandObject flags work for raw as well as parsed commands.
Made "expr" use the flags so that it requires you to be paused to run "expr".
llvm-svn: 158235
Switch over to the "*-apple-macosx" for desktop and "*-apple-ios" for iOS triples.
Also make the selection process for auto selecting platforms based off of an arch much better.
llvm-svn: 156354
Error
Host::RunShellCommand (const char *command,
const char *working_dir,
int *status_ptr,
int *signo_ptr,
std::string *command_output_ptr,
uint32_t timeout_sec);
This will allow us to use this functionality in the host lldb_private::Platform, and also use it in our lldb-platform binary. It leverages the existing code in Host::LaunchProcess and ProcessLaunchInfo.
llvm-svn: 154730
Each platform now knows if it can handle an architecture and a platform can be found using an architecture. Each platform can look at the arch, vendor and OS and know if it should be used or not.
llvm-svn: 153104
will allow us to represent a process/thread ID using a pointer for the OS
plug-ins where they might want to represent the process or thread ID using
the address of the process or thread structure.
llvm-svn: 145644
info for us to attach by pid, or by name and will also allow us to eventually
do a lot more powerful attaches. If you look at the options for the "platform
process list" command, there are many options which we should be able to
specify. This will allow us to do things like "attach to a process named 'tcsh'
that has a parent process ID of 123", or "attach to a process named 'x' which
has an effective user ID of 345".
I finished up the --shell implementation so that it can be used without the
--tty option in "process launch". The "--shell" option now can take an
optional argument which is the path to the shell to use (or a partial name
like "sh" which we will find using the current PATH environment variable).
Modified the Process::Attach to use the new ProcessAttachInfo as the sole
argument and centralized a lot of code that was in the "process attach"
Execute function so that everyone can take advantage of the powerful new
attach functionality.
llvm-svn: 144615
be in the target. All of the environment, args, stdin/out/err files, etc have
all been moved. Also re-enabled the ability to launch a process in a separate
terminal on MacOSX.
llvm-svn: 144061
on internal only (public API hasn't changed) to simplify the paramter list
to the launch calls down into just one argument. Also all of the argument,
envronment and stdio things are now handled in a much more centralized fashion.
llvm-svn: 143656
shared pointers.
Changed the ExecutionContext over to use shared pointers for
the target, process, thread and frame since these objects can
easily go away at any time and any object that was holding onto
an ExecutionContext was running the risk of using a bad object.
Now that the shared pointers for target, process, thread and
frame are just a single pointer (they all use the instrusive
shared pointers) the execution context is much safer and still
the same size.
Made the shared pointers in the the ExecutionContext class protected
and made accessors for all of the various ways to get at the pointers,
references, and shared pointers.
llvm-svn: 140298
This is helping us track down some extra references to ModuleSP objects that
are causing things to get kept around for too long.
Added a module pointer accessor to target and change a lot of code to use
it where it would be more efficient.
"taret delete" can now specify "--clean=1" which will cleanup the global module
list for any orphaned module in the shared module cache which can save memory
and also help track down module reference leaks like we have now.
llvm-svn: 137294
threads, and stack frame down in the lldb_private::Process,
lldb_private::Thread, lldb_private::StackFrameList and the
lldb_private::StackFrame classes. We had some command line
commands that had duplicate versions of the process status
output ("thread list" and "process status" for example).
Removed the "file" command and placed it where it should
have been: "target create". Made an alias for "file" to
"target create" so we stay compatible with GDB commands.
We can now have multple usable targets in lldb at the
same time. This is nice for comparing two runs of a program
or debugging more than one binary at the same time. The
new command is "target select <target-idx>" and also to see
a list of the current targets you can use the new "target list"
command. The flow in a debug session can be:
(lldb) target create /path/to/exe/a.out
(lldb) breakpoint set --name main
(lldb) run
... hit breakpoint
(lldb) target create /bin/ls
(lldb) run /tmp
Process 36001 exited with status = 0 (0x00000000)
(lldb) target list
Current targets:
target #0: /tmp/args/a.out ( arch=x86_64-apple-darwin, platform=localhost, pid=35999, state=stopped )
* target #1: /bin/ls ( arch=x86_64-apple-darwin, platform=localhost, pid=36001, state=exited )
(lldb) target select 0
Current targets:
* target #0: /tmp/args/a.out ( arch=x86_64-apple-darwin, platform=localhost, pid=35999, state=stopped )
target #1: /bin/ls ( arch=x86_64-apple-darwin, platform=localhost, pid=36001, state=exited )
(lldb) bt
* thread #1: tid = 0x2d03, 0x0000000100000b9a a.out`main + 42 at main.c:16, stop reason = breakpoint 1.1
frame #0: 0x0000000100000b9a a.out`main + 42 at main.c:16
frame #1: 0x0000000100000b64 a.out`start + 52
Above we created a target for "a.out" and ran and hit a
breakpoint at "main". Then we created a new target for /bin/ls
and ran it. Then we listed the targest and selected our original
"a.out" program, so we showed two concurent debug sessions
going on at the same time.
llvm-svn: 129695
Modified the OptionGroupOptions to be able to specify only some of the options
that should be appended by using the usage_mask in the group defintions and
also provided a way to remap them to a new usage mask after the copy. This
allows options to be re-used and also targetted for specific option groups.
Modfied the CommandArgumentType to have a new eArgTypePlatform enumeration.
Taught the option parser to be able to automatically use the appropriate
auto completion for a given options if nothing is explicitly specified
in the option definition. So you don't have to specify it in the option
definition tables.
Renamed the default host platform name to "host", and the default platform
hostname to be "localhost".
Modified the "file" and "platform select" commands to make sure all options
and args are good prior to creating a new platform. Also defer the computation
of the architecture in the file command until all options are parsed and the
platform has either not been specified or reset to a new value to avoid
computing the arch more than once.
Switch the PluginManager code over to using llvm::StringRef for string
comparisons and got rid of all the AccessorXXX functions in lieu of the newer
mutex + collection singleton accessors.
llvm-svn: 129483
lldb_private::OptionGroup
lldb_private::OptionGroupOptions
OptionGroup lets you define a class that encapsulates settings that you want
to reuse in multiple commands. It contains only the option definitions and the
ability to set the option values, but it doesn't directly interface with the
lldb_private::Options class that is the front end to all of the CommandObject
option parsing. For that the OptionGroupOptions class can be used. It aggregates
one or more OptionGroup objects and directs the option setting to the
appropriate OptionGroup class. For an example of this, take a look at the
CommandObjectFile and how it uses its "m_option_group" object shown below
to be able to set values in both the FileOptionGroup and PlatformOptionGroup
classes. The members used in CommandObjectFile are:
OptionGroupOptions m_option_group;
FileOptionGroup m_file_options;
PlatformOptionGroup m_platform_options;
Then in the constructor for CommandObjectFile you can combine the option
settings. The code below shows a simplified version of the constructor:
CommandObjectFile::CommandObjectFile(CommandInterpreter &interpreter) :
CommandObject (...),
m_option_group (interpreter),
m_file_options (),
m_platform_options(true)
{
m_option_group.Append (&m_file_options);
m_option_group.Append (&m_platform_options);
m_option_group.Finalize();
}
We append the m_file_options and then the m_platform_options and then tell
the option group the finalize the results. This allows the m_option_group to
become the organizer of our prefs and after option parsing we end up with
valid preference settings in both the m_file_options and m_platform_options
objects. This also allows any other commands to use the FileOptionGroup and
PlatformOptionGroup classes to implement options for their commands.
Renamed:
virtual void Options::ResetOptionValues();
to:
virtual void Options::OptionParsingStarting();
And implemented a new callback named:
virtual Error Options::OptionParsingFinished();
This allows Options subclasses to verify that the options all go together
after all of the options have been specified and gives the chance for the
command object to return an error. It also gives a chance to take all of the
option values and produce or initialize objects after all options have
completed parsing.
Modfied:
virtual Error
SetOptionValue (int option_idx, const char *option_arg) = 0;
to be:
virtual Error
SetOptionValue (uint32_t option_idx, const char *option_arg) = 0;
(option_idx is now unsigned).
llvm-svn: 129415
the CommandInterpreter where it was always being used.
Make sure that Modules can track their object file offsets correctly to
allow opening of sub object files (like the "__commpage" on darwin).
Modified the Platforms to be able to launch processes. The first part of this
move is the platform soon will become the entity that launches your program
and when it does, it uses a new ProcessLaunchInfo class which encapsulates
all process launching settings. This simplifies the internal APIs needed for
launching. I want to slowly phase out process launching from the process
classes, so for now we can still launch just as we used to, but eventually
the platform is the object that should do the launching.
Modified the Host::LaunchProcess in the MacOSX Host.mm to correctly be able
to launch processes with all of the new eLaunchFlag settings. Modified any
code that was manually launching processes to use the Host::LaunchProcess
functions.
Fixed an issue where lldb_private::Args had implicitly defined copy
constructors that could do the wrong thing. This has now been fixed by adding
an appropriate copy constructor and assignment operator.
Make sure we don't add empty ModuleSP entries to a module list.
Fixed the commpage module creation on MacOSX, but we still need to train
the MacOSX dynamic loader to not get rid of it when it doesn't have an entry
in the all image infos.
Abstracted many more calls from in ProcessGDBRemote down into the
GDBRemoteCommunicationClient subclass to make the classes cleaner and more
efficient.
Fixed the default iOS ARM register context to be correct and also added support
for targets that don't support the qThreadStopInfo packet by selecting the
current thread (only if needed) and then sending a stop reply packet.
Debugserver can now start up with a --unix-socket (-u for short) and can
then bind to port zero and send the port it bound to to a listening process
on the other end. This allows the GDB remote platform to spawn new GDB server
instances (debugserver) to allow platform debugging.
llvm-svn: 129351
This allows you to have a platform selected, then specify a triple using
"i386" and have the remaining triple items (vendor, os, and environment) set
automatically.
Many interpreter commands take the "--arch" option to specify an architecture
triple, so now the command options needed to be able to get to the current
platform, so the Options class now take a reference to the interpreter on
construction.
Modified the build LLVM building in the Xcode project to use the new
Xcode project level user definitions:
LLVM_BUILD_DIR - a path to the llvm build directory
LLVM_SOURCE_DIR - a path to the llvm sources for the llvm that will be used to build lldb
LLVM_CONFIGURATION - the configuration that lldb is built for (Release,
Release+Asserts, Debug, Debug+Asserts).
I also changed the LLVM build to not check if "lldb/llvm" is a symlink and
then assume it is a real llvm build directory versus the unzipped llvm.zip
package, so now you can actually have a "lldb/llvm" directory in your lldb
sources.
llvm-svn: 129112
event.
Modified the ProcessInfo structure to contain all process arguments. Using the
new function calls on MacOSX allows us to see the full process name, not just
the first 16 characters.
Added a new platform command: "platform process info <pid> [<pid> <pid> ...]"
that can be used to get detailed information for a process including all
arguments, user and group info and more.
llvm-svn: 128694
class now implements the Host functionality for a lot of things that make
sense by default so that subclasses can check:
int
PlatformSubclass::Foo ()
{
if (IsHost())
return Platform::Foo (); // Let the platform base class do the host specific stuff
// Platform subclass specific code...
int result = ...
return result;
}
Added new functions to the platform:
virtual const char *Platform::GetUserName (uint32_t uid);
virtual const char *Platform::GetGroupName (uint32_t gid);
The user and group names are cached locally so that remote platforms can avoid
sending packets multiple times to resolve this information.
Added the parent process ID to the ProcessInfo class.
Added a new ProcessInfoMatch class which helps us to match processes up
and changed the Host layer over to using this new class. The new class allows
us to search for processs:
1 - by name (equal to, starts with, ends with, contains, and regex)
2 - by pid
3 - And further check for parent pid == value, uid == value, gid == value,
euid == value, egid == value, arch == value, parent == value.
This is all hookup up to the "platform process list" command which required
adding dumping routines to dump process information. If the Host class
implements the process lookup routines, you can now lists processes on
your local machine:
machine1.foo.com % lldb
(lldb) platform process list
PID PARENT USER GROUP EFF USER EFF GROUP TRIPLE NAME
====== ====== ========== ========== ========== ========== ======================== ============================
99538 1 username usergroup username usergroup x86_64-apple-darwin FileMerge
94943 1 username usergroup username usergroup x86_64-apple-darwin mdworker
94852 244 username usergroup username usergroup x86_64-apple-darwin Safari
94727 244 username usergroup username usergroup x86_64-apple-darwin Xcode
92742 92710 username usergroup username usergroup i386-apple-darwin debugserver
This of course also works remotely with the lldb-platform:
machine1.foo.com % lldb-platform --listen 1234
machine2.foo.com % lldb
(lldb) platform create remote-macosx
Platform: remote-macosx
Connected: no
(lldb) platform connect connect://localhost:1444
Platform: remote-macosx
Triple: x86_64-apple-darwin
OS Version: 10.6.7 (10J869)
Kernel: Darwin Kernel Version 10.7.0: Sat Jan 29 15:17:16 PST 2011; root:xnu-1504.9.37~1/RELEASE_I386
Hostname: machine1.foo.com
Connected: yes
(lldb) platform process list
PID PARENT USER GROUP EFF USER EFF GROUP TRIPLE NAME
====== ====== ========== ========== ========== ========== ======================== ============================
99556 244 username usergroup username usergroup x86_64-apple-darwin trustevaluation
99548 65539 username usergroup username usergroup x86_64-apple-darwin lldb
99538 1 username usergroup username usergroup x86_64-apple-darwin FileMerge
94943 1 username usergroup username usergroup x86_64-apple-darwin mdworker
94852 244 username usergroup username usergroup x86_64-apple-darwin Safari
The lldb-platform implements everything with the Host:: layer, so this should
"just work" for linux. I will probably be adding more stuff to the Host layer
for launching processes and attaching to processes so that this support should
eventually just work as well.
Modified the target to be able to be created with an architecture that differs
from the main executable. This is needed for iOS debugging since we can have
an "armv6" binary which can run on an "armv7" machine, so we want to be able
to do:
% lldb
(lldb) platform create remote-ios
(lldb) file --arch armv7 a.out
Where "a.out" is an armv6 executable. The platform then can correctly decide
to open all "armv7" images for all dependent shared libraries.
Modified the disassembly to show the current PC value. Example output:
(lldb) disassemble --frame
a.out`main:
0x1eb7: pushl %ebp
0x1eb8: movl %esp, %ebp
0x1eba: pushl %ebx
0x1ebb: subl $20, %esp
0x1ebe: calll 0x1ec3 ; main + 12 at test.c:18
0x1ec3: popl %ebx
-> 0x1ec4: calll 0x1f12 ; getpid
0x1ec9: movl %eax, 4(%esp)
0x1ecd: leal 199(%ebx), %eax
0x1ed3: movl %eax, (%esp)
0x1ed6: calll 0x1f18 ; printf
0x1edb: leal 213(%ebx), %eax
0x1ee1: movl %eax, (%esp)
0x1ee4: calll 0x1f1e ; puts
0x1ee9: calll 0x1f0c ; getchar
0x1eee: movl $20, (%esp)
0x1ef5: calll 0x1e6a ; sleep_loop at test.c:6
0x1efa: movl $12, %eax
0x1eff: addl $20, %esp
0x1f02: popl %ebx
0x1f03: leave
0x1f04: ret
This can be handy when dealing with the new --line options that was recently
added:
(lldb) disassemble --line
a.out`main + 13 at test.c:19
18 {
-> 19 printf("Process: %i\n\n", getpid());
20 puts("Press any key to continue..."); getchar();
-> 0x1ec4: calll 0x1f12 ; getpid
0x1ec9: movl %eax, 4(%esp)
0x1ecd: leal 199(%ebx), %eax
0x1ed3: movl %eax, (%esp)
0x1ed6: calll 0x1f18 ; printf
Modified the ModuleList to have a lookup based solely on a UUID. Since the
UUID is typically the MD5 checksum of a binary image, there is no need
to give the path and architecture when searching for a pre-existing
image in an image list.
Now that we support remote debugging a bit better, our lldb_private::Module
needs to be able to track what the original path for file was as the platform
knows it, as well as where the file is locally. The module has the two
following functions to retrieve both paths:
const FileSpec &Module::GetFileSpec () const;
const FileSpec &Module::GetPlatformFileSpec () const;
llvm-svn: 128563
public types and public enums. This was done to keep the SWIG stuff from
parsing all sorts of enums and types that weren't needed, and allows us to
abstract our API better.
llvm-svn: 128239
On Mac OS X we now have 3 platforms:
PlatformDarwin - must be subclassed to fill in the missing pure virtual funcs
but this implements all the common functionality between
remote-macosx and remote-ios. It also allows for another
platform to be used (remote-gdb-server for now) when doing
remote connections. Keeping this pluggable will allow for
flexibility.
PlatformMacOSX - Now implements both local and remote macosx desktop platforms.
PlatformRemoteiOS - Remote only iOS that knows how to locate SDK files in the
cached SDK locations on the host.
A new agnostic platform has been created:
PlatformRemoteGDBServer - this implements the platform using the GDB remote
protocol and uses the built in lldb_private::Host
static functions to implement many queries.
llvm-svn: 128193
platform connect <args>
platform disconnect
Each platform can decide the args they want to use for "platform connect". I
will need to add a function that gets the connect options for the current
platform as each one can have different options and argument counts.
Hooked up more functionality in the PlatformMacOSX and PlatformRemoteiOS.
Also started an platform agnostic PlatformRemoteGDBServer.cpp which can end
up being used by one or more actual platforms. It can also be specialized and
allow for platform specific commands.
llvm-svn: 128123
platform status -- gets status information for the selected platform
platform create <platform-name> -- creates a new instance of a remote platform
platform list -- list all available platforms
platform select -- select a platform instance as the current platform (not working yet)
When using "platform create" it will create a remote platform and make it the
selected platform. For instances for iPhone OS debugging on Mac OS X one can
do:
(lldb) platform create remote-ios --sdk-version=4.0
Remote platform: iOS platform
SDK version: 4.0
SDK path: "/Developer/Platforms/iPhoneOS.platform/DeviceSupport/4.0"
Not connected to a remote device.
(lldb) file ~/Documents/a.out
Current executable set to '~/Documents/a.out' (armv6).
(lldb) image list
[ 0] /Volumes/work/gclayton/Documents/devb/attach/a.out
[ 1] /Developer/Platforms/iPhoneOS.platform/DeviceSupport/4.0/Symbols/usr/lib/dyld
[ 2] /Developer/Platforms/iPhoneOS.platform/DeviceSupport/4.0/Symbols/usr/lib/libSystem.B.dylib
Note that this is all happening prior to running _or_ connecting to a remote
platform. Once connected to a remote platform the OS version might change which
means we will need to update our dependecies. Also once we run, we will need
to match up the actualy binaries with the actualy UUID's to files in the
SDK, or download and cache them locally.
This is just the start of the remote platforms, but this modification is the
first iteration in getting the platforms really doing something.
llvm-svn: 127934
Stella Stamenova