This extends any frame record created in the function to include that
parameter, passed in X22.
The new record looks like [X22, FP, LR] in memory, and FP is stored with 0b0001
in bits 63:60 (CodeGen assumes they are 0b0000 in normal operation). The effect
of this is that tools walking the stack should expect to see one of three
values there:
* 0b0000 => a normal, non-extended record with just [FP, LR]
* 0b0001 => the extended record [X22, FP, LR]
* 0b1111 => kernel space, and a non-extended record.
All other values are currently reserved.
If compiling for arm64e this context pointer is address-discriminated with the
discriminator 0xc31a and the DB (process-specific) key.
There is also an "i8** @llvm.swift.async.context.addr()" intrinsic providing
front-ends access to this slot (and forcing its creation initialized to nullptr
if necessary).
Second land attempt. MachineVerifier DefRegState expensive check errors fixed.
Prologs and epilogs handle callee-save registers and tend to be irregular with
different immediate offsets that are not often handled by the MachineOutliner.
Commit D18619/a5335647d5e8 (combining stack operations) stretched irregularity
further.
This patch tries to emit homogeneous stores and loads with the same offset for
prologs and epilogs respectively. We have observed that this canonicalizes
(homogenizes) prologs and epilogs significantly and results in a greatly
increased chance of outlining, resulting in a code size reduction.
Despite the above results, there are still size wins to be had that the
MachineOutliner does not provide due to the special handling X30/LR. To handle
the LR case, his patch custom-outlines prologs and epilogs in place. It does
this by doing the following:
* Injects HOM_Prolog and HOM_Epilog pseudo instructions during a Prolog and
Epilog Injection Pass.
* Lowers and optimizes said pseudos in a AArchLowerHomogneousPrologEpilog Pass.
* Outlined helpers are created on demand. Identical helpers are merged by the linker.
* An opt-in flag is introduced to enable this feature. Another threshold flag
is also introduced to control the aggressiveness of outlining for application's need.
This reduced an average of 4% of code size on LLVM-TestSuite/CTMark targeting arm64/-Oz.
Differential Revision: https://reviews.llvm.org/D76570
Prologs and epilogs handle callee-save registers and tend to be irregular with
different immediate offsets that are not often handled by the MachineOutliner.
Commit D18619/a5335647d5e8 (combining stack operations) stretched irregularity
further.
This patch tries to emit homogeneous stores and loads with the same offset for
prologs and epilogs respectively. We have observed that this canonicalizes
(homogenizes) prologs and epilogs significantly and results in a greatly
increased chance of outlining, resulting in a code size reduction.
Despite the above results, there are still size wins to be had that the
MachineOutliner does not provide due to the special handling X30/LR. To handle
the LR case, his patch custom-outlines prologs and epilogs in place. It does
this by doing the following:
* Injects HOM_Prolog and HOM_Epilog pseudo instructions during a Prolog and
Epilog Injection Pass.
* Lowers and optimizes said pseudos in a AArchLowerHomogneousPrologEpilog Pass.
* Outlined helpers are created on demand. Identical helpers are merged by the linker.
* An opt-in flag is introduced to enable this feature. Another threshold flag
is also introduced to control the aggressiveness of outlining for application's need.
This reduced an average of 4% of code size on LLVM-TestSuite/CTMark targeting arm64/-Oz.
Differential Revision: https://reviews.llvm.org/D76570
To accommodate frame layouts that have both fixed and scalable objects
on the stack, describing a stack location or offset using a pointer + uint64_t
is not sufficient. For this reason, we've introduced the StackOffset class,
which models both the fixed- and scalable sized offsets.
The TargetFrameLowering::getFrameIndexReference is made to return a StackOffset,
so that this can be used in other interfaces, such as to eliminate frame indices
in PEI or to emit Debug locations for variables on the stack.
This patch is purely mechanical and doesn't change the behaviour of how
the result of this function is used for fixed-sized offsets. The patch adds
various checks to assert that the offset has no scalable component, as frame
offsets with a scalable component are not yet supported in various places.
Reviewed By: arsenm
Differential Revision: https://reviews.llvm.org/D90018
This patch replaces the AArch64StackOffset class by the generic one
defined in TypeSize.h.
Reviewed By: david-arm
Differential Revision: https://reviews.llvm.org/D88983
Implement stack frame reordering in the AArch64 backend.
Unlike the X86 implementation, AArch64 does not seem to benefit from
"access density" based frame reordering, mainly because it has a much
smaller variety of addressing modes, and the fact that all instructions
are 4 bytes so each frame object is either in range of an instruction
(and then the access is "free") or not (and that has a code size cost
of 4 bytes).
This change improves Memory Tagging codegen by
* Placing an object that has been chosen as the base tagged pointer of
the function at SP + 0. This saves one instruction to setup the pointer
(IRG does not have an offset immediate), and more because that object
can now be referenced without materializing its tagged address in a
scratch register.
* Placing objects that go out of scope simultaneously together. This
exposes opportunities for instruction merging in tryMergeAdjacentSTG.
Differential Revision: https://reviews.llvm.org/D72366
On windows, the callee saved registers in a canonical prologue are
ordered starting from a lower register number at a lower stack
address (with the possible gap for aligning the stack at the top);
this is the opposite order that llvm normally produces.
To achieve this, reverse the order of the registers in the
assignCalleeSavedSpillSlots callback, to get the stack objects
laid out by PrologEpilogInserter in the right order, and adjust
computeCalleeSaveRegisterPairs to lay them out from the bottom up.
This allows generated prologs more often to match the format that
allows the unwind info to be written as packed info.
Differential Revision: https://reviews.llvm.org/D88677
This patch adds a CFI entry for each SVE callee saved register
that needs unwind info at an offset from the CFA. The offset is
a DWARF expression because the offset is partly scalable.
The CFI entries only cover a subset of the SVE callee-saves and
only encodes the lower 64-bits, thus implementing the lowest
common denominator ABI. Existing unwinders may support VG but
only restore the lower 64-bits.
Reviewed By: efriedma
Differential Revision: https://reviews.llvm.org/D84044
The CFA is calculated as (SP/FP + offset), but when there are
SVE objects on the stack the SP offset is partly scalable and
should instead be expressed as the DWARF expression:
SP + offset + scalable_offset * VG
where VG is the Vector Granule register, containing the
number of 64bits 'granules' in a scalable vector.
Reviewed By: efriedma
Differential Revision: https://reviews.llvm.org/D84043
I have introduced a new TargetFrameLowering query function:
isStackIdSafeForLocalArea
that queries whether or not it is safe for objects of a given stack
id to be bundled into the local area. The default behaviour is to
always bundle regardless of the stack id, however for AArch64 this is
overriden so that it's only safe for fixed-size stack objects.
There is future work here to extend this algorithm for multiple local
areas so that SVE stack objects can be bundled together and accessed
from their own virtual base-pointer.
Differential Revision: https://reviews.llvm.org/D83859
This patch handles CFI with basic block sections, which unlike DebugInfo does
not support ranges. The DWARF standard explicitly requires emitting separate
CFI Frame Descriptor Entries for each contiguous fragment of a function. Thus,
the CFI information for all callee-saved registers (possibly including the
frame pointer, if necessary) have to be emitted along with redefining the
Call Frame Address (CFA), viz. where the current frame starts.
CFI directives are emitted in FDE’s in the object file with a low_pc, high_pc
specification. So, a single FDE must point to a contiguous code region unlike
debug info which has the support for ranges. This is what complicates CFI for
basic block sections.
Now, what happens when we start placing individual basic blocks in unique
sections:
* Basic block sections allow the linker to randomly reorder basic blocks in the
address space such that a given basic block can become non-contiguous with the
original function.
* The different basic block sections can no longer share the cfi_startproc and
cfi_endproc directives. So, each basic block section should emit this
independently.
* Each (cfi_startproc, cfi_endproc) directive will result in a new FDE that
caters to that basic block section.
* Now, this basic block section needs to duplicate the information from the
entry block to compute the CFA as it is an independent entity. It cannot refer
to the FDE of the original function and hence must duplicate all the stuff that
is needed to compute the CFA on its own.
* We are working on a de-duplication patch that can share common information in
FDEs in a CIE (Common Information Entry) and we will present this as a follow up
patch. This can significantly reduce the duplication overhead and is
particularly useful when several basic block sections are created.
* The CFI directives are emitted similarly for registers that are pushed onto
the stack, like callee saved registers in the prologue. There are cfi
directives that emit how to retrieve the value of the register at that point
when the push happened. This has to be duplicated too in a basic block that is
floated as a separate section.
Differential Revision: https://reviews.llvm.org/D79978
Summary:
Detect a run of memory tagging instructions for adjacent stack frame slots,
and replace them with a shorter instruction sequence
* replace STG + STG with ST2G
* replace STGloop + STGloop with STGloop
This code needs to run when stack slot offsets are already known, but before
FrameIndex operands in STG instructions are eliminated; that's the
reason for the new hook in PrologueEpilogue.
This change modifies STGloop and STZGloop pseudos to take the size as an
immediate integer operand, and adds _untied variants of those pseudos
that are allowed to take the base address as a FI operand. This is needed to
simplify recognizing an STGloop instruction as operating on a stack slot
post-regalloc.
This improves memtag code size by ~0.25%, and it looks like an additional ~0.1%
is possible by rearranging the stack frame such that consecutive STG
instructions reference adjacent slots (patch pending).
Reviewers: pcc, ostannard
Subscribers: hiraditya, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D70286
Summary:
Detect a run of memory tagging instructions for adjacent stack frame slots,
and replace them with a shorter instruction sequence
* replace STG + STG with ST2G
* replace STGloop + STGloop with STGloop
This code needs to run when stack slot offsets are already known, but before
FrameIndex operands in STG instructions are eliminated; that's the
reason for the new hook in PrologueEpilogue.
This change modifies STGloop and STZGloop pseudos to take the size as an
immediate integer operand, and base address as a FI operand when
possible. This is needed to simplify recognizing an STGloop instruction
as operating on a stack slot post-regalloc.
This improves memtag code size by ~0.25%, and it looks like an additional ~0.1%
is possible by rearranging the stack frame such that consecutive STG
instructions reference adjacent slots (patch pending).
Reviewers: pcc, ostannard
Subscribers: hiraditya, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D70286
Summary:
This patch fixes a few issues when large arrays are allocated on the
stack. Currently, clang has inconsistent behaviour, for debug builds
there is an assertion failure when the array size on stack is around 2GB
but there is no assertion when the stack is around 8GB. For release
builds there is no assertion, the compilation succeeds but generates
incorrect code. The incorrect code generated is due to using
int/unsigned int instead of their 64-bit counterparts. This patch,
1) Removes the assertion in frame legality check.
2) Converts int/unsigned int in some places to the 64-bit variants. This
helps in generating correct code and removes the inconsistent behaviour.
3) Adds a test which runs without optimisations.
Reviewers: sdesmalen, efriedma, fhahn, aemerson
Reviewed By: efriedma
Subscribers: eli.friedman, fpetrogalli, kristof.beyls, hiraditya,
llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D70496
This patch adds a target interface to set the StackID for a given type,
which allows scalable vectors (e.g. `<vscale x 16 x i8>`) to be assigned a
'sve-vec' StackID, so it is allocated in the SVE area of the stack frame.
Reviewers: ostannard, efriedma, rengolin, cameron.mcinally
Reviewed By: efriedma
Differential Revision: https://reviews.llvm.org/D70080
Summary:
This is patch is part of a series to introduce an Alignment type.
See this thread for context: http://lists.llvm.org/pipermail/llvm-dev/2019-July/133851.html
See this patch for the introduction of the type: https://reviews.llvm.org/D64790
Reviewers: courbet
Subscribers: arsenm, dschuff, jyknight, sdardis, jvesely, nhaehnle, sbc100, jgravelle-google, hiraditya, aheejin, fedor.sergeev, jrtc27, atanasyan, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D69216
llvm-svn: 375398
Summary:
This is patch is part of a series to introduce an Alignment type.
See this thread for context: http://lists.llvm.org/pipermail/llvm-dev/2019-July/133851.html
See this patch for the introduction of the type: https://reviews.llvm.org/D64790
Reviewers: courbet
Subscribers: jholewinski, arsenm, dschuff, jyknight, dylanmckay, sdardis, nemanjai, jvesely, nhaehnle, sbc100, jgravelle-google, hiraditya, aheejin, kbarton, fedor.sergeev, asb, rbar, johnrusso, simoncook, apazos, sabuasal, niosHD, jrtc27, MaskRay, zzheng, edward-jones, atanasyan, rogfer01, MartinMosbeck, brucehoult, the_o, PkmX, jocewei, jsji, Jim, lenary, s.egerton, pzheng, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D68993
llvm-svn: 375084
Materialize accesses to SVE frame objects from SP or FP, whichever is
available and beneficial.
This patch still assumes the objects are pre-allocated. The automatic
layout of SVE objects within the stackframe will be added in a separate
patch.
Reviewers: greened, cameron.mcinally, efriedma, rengolin, thegameg, rovka
Reviewed By: cameron.mcinally
Differential Revision: https://reviews.llvm.org/D67749
llvm-svn: 374772
Adds support to AArch64FrameLowering to allocate fixed-stack SVE objects.
The focus of this patch is purely to allow the stack frame to
allocate/deallocate space for scalable SVE objects. More dynamic
allocation (at compile-time, i.e. determining placement of SVE objects
on the stack), or resolving frame-index references that include
scalable-sized offsets, are left for subsequent patches.
SVE objects are allocated in the stack frame as a separate region below
the callee-save area, and above the alignment gap. This is done so that
the SVE objects can be accessed directly from the FP at (runtime)
VL-based offsets to benefit from using the VL-scaled addressing modes.
The layout looks as follows:
+-------------+
| stack arg |
+-------------+
| Callee Saves|
| X29, X30 | (if available)
|-------------| <- FP (if available)
| : |
| SVE area |
| : |
+-------------+
|/////////////| alignment gap.
| : |
| Stack objs |
| : |
+-------------+ <- SP after call and frame-setup
SVE and non-SVE stack objects are distinguished using different
StackIDs. The offsets for objects with TargetStackID::SVEVector should be
interpreted as purely scalable offsets within their respective SVE region.
Reviewers: thegameg, rovka, t.p.northover, efriedma, rengolin, greened
Reviewed By: efriedma
Differential Revision: https://reviews.llvm.org/D61437
llvm-svn: 373585
To support spilling/filling of scalable vectors we need a more generic
representation of a stack offset than simply 'int'.
For this we introduce the StackOffset struct, which comprises multiple
offsets sized by their respective MVTs. Byte-offsets will thus be a simple
tuple such as { offset, MVT::i8 }. Adding two byte-offsets will result in a
byte offset { offsetA + offsetB, MVT::i8 }. When two offsets have different
types, we can canonicalise them to use the same MVT, as long as their
runtime sizes are guaranteed to have the same size-ratio as they would have
at compile-time.
When we have both scalable- and fixed-size objects on the stack, we can
create an offset that is:
({ offset_fixed, MVT::i8 } + { offset_scalable, MVT::nxv1i8 })
The struct also contains a getForFrameOffset() method that is specific to
AArch64 and decomposes the frame-offset to be used directly in instructions
that operate on the stack or index into the stack.
Note: This patch adds StackOffset as an AArch64-only concept, but we would
like to make this a generic concept/struct that is supported by all
interfaces that take or return stack offsets (currently as 'int'). Since
that would be a bigger change that is currently pending on D32530 landing,
we thought it makes sense to first show/prove the concept in the AArch64
target before proposing to roll this out further.
Reviewers: thegameg, rovka, t.p.northover, efriedma, greened
Reviewed By: rovka, greened
Differential Revision: https://reviews.llvm.org/D61435
llvm-svn: 368024
Split AArch64FrameLowering::resolveFrameIndexReference in two parts
* Finding frame offset for the index.
* Finding base register and offset to that register.
The second part will be used to implement a virtual frame pointer in
armv8.5 MTE stack instrumentation lowering.
Reviewers: pcc, vitalybuka, hctim, ostannard
Subscribers: javed.absar, kristof.beyls, hiraditya, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D64171
llvm-svn: 365958
To help produce better diagnostics for stack use-after-return, we'd like
to be able to determine the addresses of each HWASANified function's local
variables given a small amount of information recorded on entry to the
function. Currently we require all HWASANified functions to use frame pointers
and record (PC, FP) on function entry. This works better than recording SP
because FP cannot change during the function, unlike SP which can change
e.g. due to dynamic alloca.
However, most variables currently end up using SP-relative locations in their
debug info. This prevents us from recomputing the address of most variables
because the distance between SP and FP isn't recorded in the debug info. To
address this, make the AArch64 backend prefer FP-relative debug locations
when producing debug info for HWASANified functions.
Differential Revision: https://reviews.llvm.org/D63300
llvm-svn: 364117
Summary: This fixes using the correct stack registers for SEH when stack realignment is needed or when variable size objects are present.
Reviewers: rnk, efriedma, ssijaric, TomTan
Reviewed By: rnk, efriedma
Subscribers: javed.absar, kristof.beyls, llvm-commits
Differential Revision: https://reviews.llvm.org/D57183
llvm-svn: 352923
to reflect the new license.
We understand that people may be surprised that we're moving the header
entirely to discuss the new license. We checked this carefully with the
Foundation's lawyer and we believe this is the correct approach.
Essentially, all code in the project is now made available by the LLVM
project under our new license, so you will see that the license headers
include that license only. Some of our contributors have contributed
code under our old license, and accordingly, we have retained a copy of
our old license notice in the top-level files in each project and
repository.
llvm-svn: 351636
This patch adds support for funclets in frame lowering and ISel
lowering. Together with D50288 and D50166, it enables C++ exception
handling.
Patch by Sanjin Sijaric, with some fixes by me.
Differential Revision: https://reviews.llvm.org/D51524
llvm-svn: 346568
We've been running doxygen with the autobrief option for a couple of
years now. This makes the \brief markers into our comments
redundant. Since they are a visual distraction and we don't want to
encourage more \brief markers in new code either, this patch removes
them all.
Patch produced by
for i in $(git grep -l '\\brief'); do perl -pi -e 's/\\brief //g' $i & done
Differential Revision: https://reviews.llvm.org/D46290
llvm-svn: 331272
This header already includes a CodeGen header and is implemented in
lib/CodeGen, so move the header there to match.
This fixes a link error with modular codegeneration builds - where a
header and its implementation are circularly dependent and so need to be
in the same library, not split between two like this.
llvm-svn: 317379
The liveness-tracking code assumes that the registers that were saved
in the function's prolog are live outside of the function. Specifically,
that registers that were saved are also live-on-exit from the function.
This isn't always the case as illustrated by the LR register on ARM.
Differential Revision: https://reviews.llvm.org/D36160
llvm-svn: 310619
Summary:
If the target requests it, use emptry spaces in the fixed and
callee-save stack area to allocate local stack objects.
AArch64: Change last callee-save reg stack object alignment instead of
size to leave a gap to take advantage of above change.
Reviewers: t.p.northover, qcolombet, MatzeB
Subscribers: rengolin, mcrosier, llvm-commits, aemerson
Differential Revision: http://reviews.llvm.org/D20220
llvm-svn: 271527
Summary:
If a function needs to allocate both callee-save stack memory and local
stack memory, we currently decrement/increment the SP in two steps:
first for the callee-save area, and then for the local stack area. This
changes the code to allocate them both at once at the very beginning/end
of the function. This has two benefits:
1) there is one fewer sub/add micro-op in the prologue/epilogue
2) the stack adjustment instructions act as a scheduling barrier, so
moving them to the very beginning/end of the function increases post-RA
scheduler's ability to move instructions (that only depend on argument
registers) before any of the callee-save stores
This change can cause an increase in instructions if the original local
stack SP decrement could be folded into the first store to the stack.
This occurs when the first local stack store is to stack offset 0. In
this case we are trading off one more sub instruction for one fewer sub
micro-op (along with benefits (2) and (3) above).
Reviewers: t.p.northover
Subscribers: aemerson, rengolin, mcrosier, llvm-commits
Differential Revision: http://reviews.llvm.org/D18619
llvm-svn: 268746
This will become necessary in a subsequent change to make this method
merge adjacent stack adjustments, i.e. it might erase the previous
and/or next instruction.
It also greatly simplifies the calls to this function from Prolog-
EpilogInserter. Previously, that had a bunch of logic to resume iteration
after the call; now it just continues with the returned iterator.
Note that this changes the behaviour of PEI a little. Previously,
it attempted to re-visit the new instruction created by
eliminateCallFramePseudoInstr(). That code was added in r36625,
but I can't see any reason for it: the new instructions will obviously
not be pseudo instructions, they will not have FrameIndex operands,
and we have already accounted for the stack adjustment.
Differential Revision: http://reviews.llvm.org/D18627
llvm-svn: 265036
Summary:
Avoid special case for FP, LR CFI emission and just allow general
AArch64FrameLowering::emitCalleeSavedFrameMoves() to handle them. Also,
stop recalculating the stack offsets in emitCalleeSavedFrameMoves()
since we can just reuse the previously calculated offset stored in the
MachineFrameInfo.
Depends on D17000
Reviewers: t.p.northover, rengolin, mcrosier, jmolloy
Subscribers: aemerson, rengolin, mcrosier, llvm-commits
Differential Revision: http://reviews.llvm.org/D17004
llvm-svn: 261885
function.
This was the same as getFrameIndexReference, but without the FrameReg
output.
Differential Revision: http://reviews.llvm.org/D12042
llvm-svn: 245148
This changes TargetFrameLowering::processFunctionBeforeCalleeSavedScan():
- Rename the function to determineCalleeSaves()
- Pass a bitset of callee saved registers by reference, thus avoiding
the function-global PhysRegUsed bitset in MachineRegisterInfo.
- Without PhysRegUsed the implementation is fine tuned to not save
physcial registers which are only read but never modified.
Related to rdar://21539507
Differential Revision: http://reviews.llvm.org/D10909
llvm-svn: 242165
The patch is generated using this command:
tools/clang/tools/extra/clang-tidy/tool/run-clang-tidy.py -fix \
-checks=-*,llvm-namespace-comment -header-filter='llvm/.*|clang/.*' \
llvm/lib/
Thanks to Eugene Kosov for the original patch!
llvm-svn: 240137
This patch introduces a new pass that computes the safe point to insert the
prologue and epilogue of the function.
The interest is to find safe points that are cheaper than the entry and exits
blocks.
As an example and to avoid regressions to be introduce, this patch also
implements the required bits to enable the shrink-wrapping pass for AArch64.
** Context **
Currently we insert the prologue and epilogue of the method/function in the
entry and exits blocks. Although this is correct, we can do a better job when
those are not immediately required and insert them at less frequently executed
places.
The job of the shrink-wrapping pass is to identify such places.
** Motivating example **
Let us consider the following function that perform a call only in one branch of
a if:
define i32 @f(i32 %a, i32 %b) {
%tmp = alloca i32, align 4
%tmp2 = icmp slt i32 %a, %b
br i1 %tmp2, label %true, label %false
true:
store i32 %a, i32* %tmp, align 4
%tmp4 = call i32 @doSomething(i32 0, i32* %tmp)
br label %false
false:
%tmp.0 = phi i32 [ %tmp4, %true ], [ %a, %0 ]
ret i32 %tmp.0
}
On AArch64 this code generates (removing the cfi directives to ease
readabilities):
_f: ; @f
; BB#0:
stp x29, x30, [sp, #-16]!
mov x29, sp
sub sp, sp, #16 ; =16
cmp w0, w1
b.ge LBB0_2
; BB#1: ; %true
stur w0, [x29, #-4]
sub x1, x29, #4 ; =4
mov w0, wzr
bl _doSomething
LBB0_2: ; %false
mov sp, x29
ldp x29, x30, [sp], #16
ret
With shrink-wrapping we could generate:
_f: ; @f
; BB#0:
cmp w0, w1
b.ge LBB0_2
; BB#1: ; %true
stp x29, x30, [sp, #-16]!
mov x29, sp
sub sp, sp, #16 ; =16
stur w0, [x29, #-4]
sub x1, x29, #4 ; =4
mov w0, wzr
bl _doSomething
add sp, x29, #16 ; =16
ldp x29, x30, [sp], #16
LBB0_2: ; %false
ret
Therefore, we would pay the overhead of setting up/destroying the frame only if
we actually do the call.
** Proposed Solution **
This patch introduces a new machine pass that perform the shrink-wrapping
analysis (See the comments at the beginning of ShrinkWrap.cpp for more details).
It then stores the safe save and restore point into the MachineFrameInfo
attached to the MachineFunction.
This information is then used by the PrologEpilogInserter (PEI) to place the
related code at the right place. This pass runs right before the PEI.
Unlike the original paper of Chow from PLDI’88, this implementation of
shrink-wrapping does not use expensive data-flow analysis and does not need hack
to properly avoid frequently executed point. Instead, it relies on dominance and
loop properties.
The pass is off by default and each target can opt-in by setting the
EnableShrinkWrap boolean to true in their derived class of TargetPassConfig.
This setting can also be overwritten on the command line by using
-enable-shrink-wrap.
Before you try out the pass for your target, make sure you properly fix your
emitProlog/emitEpilog/adjustForXXX method to cope with basic blocks that are not
necessarily the entry block.
** Design Decisions **
1. ShrinkWrap is its own pass right now. It could frankly be merged into PEI but
for debugging and clarity I thought it was best to have its own file.
2. Right now, we only support one save point and one restore point. At some
point we can expand this to several save point and restore point, the impacted
component would then be:
- The pass itself: New algorithm needed.
- MachineFrameInfo: Hold a list or set of Save/Restore point instead of one
pointer.
- PEI: Should loop over the save point and restore point.
Anyhow, at least for this first iteration, I do not believe this is interesting
to support the complex cases. We should revisit that when we motivating
examples.
Differential Revision: http://reviews.llvm.org/D9210
<rdar://problem/3201744>
llvm-svn: 236507
Add header guards to files that were missing guards. Remove #endif comments
as they don't seem common in LLVM (we can easily add them back if we decide
they're useful)
Changes made by clang-tidy with minor tweaks.
llvm-svn: 215558
Paul Walker