Some of the Arm complex pattern functions call canExtractShiftFromMul,
which can modify the DAG in-place. For this to be valid and handled
successfully we need to define ComplexPatternFuncMutatesDAG.
Differential Revision: https://reviews.llvm.org/D107476
Much like fixed-point to floating-point conversion, the converse can
also be transformed into a fixed-point VCVT. This patch transforms
multiplications of floating point numbers by 2^n into a VCVT_fix. The
exception is that a float to fixed conversion with 1 fractional bit
ends up being an FADD (FADD(x, x) emulates FMUL(x, 2)) rather than an FMUL so there is a special case for that. This patch also moves the code from https://reviews.llvm.org/D103903 into a separate function as fixed to float and float to fixed are very similar.
Differential Revision: https://reviews.llvm.org/D104793
Conversion from a fixed-point number to a floating-point number is done by
multiplying the fixed-point number by 2^(-n) where n is the number of
fractional bits. Currently this is lowered to a vcvt
(integer to floating-point) then a vmul, but it can instead be lowered
directly to a vcvt (fixed-point to floating-point). This patch enables
such transformations as long as the multiplication factor is a power of 2.
Differential Revision: https://reviews.llvm.org/D103903
We currently prefer t2CMPrs over t2CMPri when the node contains a shift.
This can introduce more nodes if the shift has multiple uses though, as
value from the shift will be needed anyway, and in the case of a t2CMPri
compared with zero will more readily be removed entirely.
Differential Revision: https://reviews.llvm.org/D101688
Based on the same for AArch64: 4751cadcca
At -O0, the fast register allocator may insert spills between the ldrex and
strex instructions inserted by AtomicExpandPass when expanding atomicrmw
instructions in LL/SC loops. To avoid this, expand to cmpxchg loops and
therefore expand the cmpxchg pseudos after register allocation.
Required a tweak to ARMExpandPseudo::ExpandCMP_SWAP to use the 4-byte encoding
of UXT, since the pseudo instruction can be allocated a high register (R8-R15)
which the 2-byte encoding doesn't support. However, the 4-byte encodings
are not present for ARM v8-M Baseline. To enable this, two new pseudos are
added for Thumb which are only valid for v8mbase, tCMP_SWAP_8 and
tCMP_SWAP_16.
The previously committed attempt in D101164 had to be reverted due to runtime
failures in the test suites. Rather than spending time fixing that
implementation (adding another implementation of atomic operations and more
divergence between backends) I have chosen to follow the approach taken in
D101163.
Differential Revision: https://reviews.llvm.org/D101898
Depends on D101912
atomicrmw instructions are expanded by AtomicExpandPass before register allocation
into cmpxchg loops. Register allocation can insert spills between the exclusive loads
and stores, which invalidates the exclusive monitor and can lead to infinite loops.
To avoid this, reimplement atomicrmw operations as pseudo-instructions and expand them
after register allocation.
Floating point legalisation:
f16 ATOMIC_LOAD_FADD(*f16, f16) is legalised to
f32 ATOMIC_LOAD_FADD(*i16, f32) and then eventually
f32 ATOMIC_LOAD_FADD_16(*i16, f32)
Differential Revision: https://reviews.llvm.org/D101164
Originally submitted as 3338290c18.
Reverted in c7df6b1223.
Similarly to D101096, this makes sure that MMO operands get propagated
through from MVE gathers/scatters to the Machine Instructions. This
allows extra scheduling freedom, not forcing the instructions to act as
scheduling barriers. We create MMO's with an unknown size, specifying
that they can load from anywhere in memory, similar to the masked_gather
or X86 intrinsics.
Differential Revision: https://reviews.llvm.org/D101219
We create MMO's for the VLDn/VSTn intrinsics in ARMTargetLowering::
getTgtMemIntrinsic, but they do not currently make it ll the way through
ISel. This changes that in the various places it needs changing, making
sure that the MMO is propagate through to the final instruction. This
can help in scheduling, not treating the VLD2/VST2 as a scheduling
barrier.
Differential Revision: https://reviews.llvm.org/D101096
atomicrmw instructions are expanded by AtomicExpandPass before register allocation
into cmpxchg loops. Register allocation can insert spills between the exclusive loads
and stores, which invalidates the exclusive monitor and can lead to infinite loops.
To avoid this, reimplement atomicrmw operations as pseudo-instructions and expand them
after register allocation.
Floating point legalisation:
f16 ATOMIC_LOAD_FADD(*f16, f16) is legalised to
f32 ATOMIC_LOAD_FADD(*i16, f32) and then eventually
f32 ATOMIC_LOAD_FADD_16(*i16, f32)
Differential Revision: https://reviews.llvm.org/D101164
Recently we improved the lowering of low overhead loops and tail
predicated loops, but concentrated first on the DLS do style loops. This
extends those improvements over to the WLS while loops, improving the
chance of lowering them successfully. To do this the lowering has to
change a little as the instructions are terminators that produce a value
- something that needs to be treated carefully.
Lowering starts at the Hardware Loop pass, inserting a new
llvm.test.start.loop.iterations that produces both an i1 to control the
loop entry and an i32 similar to the llvm.start.loop.iterations
intrinsic added for do loops. This feeds into the loop phi, properly
gluing the values together:
%wls = call { i32, i1 } @llvm.test.start.loop.iterations.i32(i32 %div)
%wls0 = extractvalue { i32, i1 } %wls, 0
%wls1 = extractvalue { i32, i1 } %wls, 1
br i1 %wls1, label %loop.ph, label %loop.exit
...
loop:
%lsr.iv = phi i32 [ %wls0, %loop.ph ], [ %iv.next, %loop ]
..
%iv.next = call i32 @llvm.loop.decrement.reg.i32(i32 %lsr.iv, i32 1)
%cmp = icmp ne i32 %iv.next, 0
br i1 %cmp, label %loop, label %loop.exit
The llvm.test.start.loop.iterations need to be lowered through ISel
lowering as a pair of WLS and WLSSETUP nodes, which each get converted
to t2WhileLoopSetup and t2WhileLoopStart Pseudos. This helps prevent
t2WhileLoopStart from being a terminator that produces a value,
something difficult to control at that stage in the pipeline. Instead
the t2WhileLoopSetup produces the value of LR (essentially acting as a
lr = subs rn, 0), t2WhileLoopStart consumes that lr value (the Bcc).
These are then converted into a single t2WhileLoopStartLR at the same
point as t2DoLoopStartTP and t2LoopEndDec. Otherwise we revert the loop
to prevent them from progressing further in the pipeline. The
t2WhileLoopStartLR is a single instruction that takes a GPR and produces
LR, similar to the WLS instruction.
%1:gprlr = t2WhileLoopStartLR %0:rgpr, %bb.3
t2B %bb.1
...
bb.2.loop:
%2:gprlr = PHI %1:gprlr, %bb.1, %3:gprlr, %bb.2
...
%3:gprlr = t2LoopEndDec %2:gprlr, %bb.2
t2B %bb.3
The t2WhileLoopStartLR can then be treated similar to the other low
overhead loop pseudos, eventually being lowered to a WLS providing the
branches are within range.
Differential Revision: https://reviews.llvm.org/D97729
This removes the existing patterns for inserting two lanes into an
f16/i16 vector register using VINS, instead using a DAG combine to
pattern match the same code sequences. The tablegen patterns were
already on the large side (foreach LANE = [0, 2, 4, 6]) and were not
handling all the cases they could. Moving that to a DAG combine, whilst
not less code, allows us to better control and expand the selection of
VINSs. Additionally this allows us to remove the AddedComplexity on
VCVTT.
The extra trick that this has learned in the process is to move two
adjacent lanes using a single f32 vmov, allowing some extra
inefficiencies to be removed.
Differenial Revision: https://reviews.llvm.org/D96876
Summary:
Instead of generating two i32 instructions for each load or store of a volatile
i64 value (two LDRs or STRs), now emit LDRD/STRD.
These improvements cover architectures implementing ARMv5TE or Thumb-2.
The code generation explicitly deviates from using the register-offset
variant of LDRD/STRD. In this variant, the register allocated to the
register-offset cannot be reused in any of the remaining operands. Such
restriction seems to be non-trivial to implement in LLVM, thus it is
left as a to-do.
Differential Revision: https://reviews.llvm.org/D70072
This reverts commit 8a12553223.
A bug has been found when generating code for Thumb2. In some very
specific cases, the prologue/epilogue emitter generates erroneous stack
offsets for the new LDRD instructions that access the stack.
This bug does not seem to be caused by the reverted patch though. Likely
the latter has made an undiscovered issue emerge in the
prologue/epilogue emission pass. Nevertheless, this reversion is
necessary since it is blocking users of the ARM backend.
Summary:
This change implements ACLE CDE intrinsics that translate to
instructions working with general-purpose registers.
The specification is available at
https://static.docs.arm.com/101028/0010/ACLE_2019Q4_release-0010.pdf
Each ACLE intrinsic gets a corresponding LLVM IR intrinsic (because
they have distinct function prototypes). Dual-register operands are
represented as pairs of i32 values. Because of this the instruction
selection for these intrinsics cannot be represented as TableGen
patterns and requires custom C++ code.
Reviewers: simon_tatham, MarkMurrayARM, dmgreen, ostannard
Reviewed By: MarkMurrayARM
Subscribers: kristof.beyls, hiraditya, danielkiss, cfe-commits
Tags: #clang
Differential Revision: https://reviews.llvm.org/D76296
This changes the way that asrl and lsrl intrinsics are lowered, going
via a the ISEL ASRL and LSLL nodes instead of straight to machine nodes.
On top of that, it adds some constant folds for long shifts, in case it
turns out that the shift amount was either constant or 0.
Differential Revision: https://reviews.llvm.org/D75553
Summary:
Instead of generating two i32 instructions for each load or store of a volatile
i64 value (two LDRs or STRs), now emit LDRD/STRD.
These improvements cover architectures implementing ARMv5TE or Thumb-2.
The code generation explicitly deviates from using the register-offset
variant of LDRD/STRD. In this variant, the register allocated to the
register-offset cannot be reused in any of the remaining operands. Such
restriction seems to be non-trivial to implement in LLVM, thus it is
left as a to-do.
Reviewers: dmgreen, efriedma, john.brawn, nickdesaulniers
Reviewed By: efriedma, nickdesaulniers
Subscribers: danielkiss, alanphipps, hans, nathanchance, nickdesaulniers, vvereschaka, kristof.beyls, hiraditya, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D70072
Summary:
The VSHLC instruction performs a left shift of a whole vector register
by an immediate shift count up to 32, shifting in new bits at the low
end from a GPR and delivering the shifted-out bits from the high end
back into the same GPR.
Since the instruction produces two outputs (the shifted vector
register and the output GPR of shifted-out bits), it has to be
instruction-selected in C++ rather than Tablegen.
Reviewers: MarkMurrayARM, dmgreen, miyuki, ostannard
Reviewed By: miyuki
Subscribers: kristof.beyls, hiraditya, cfe-commits, llvm-commits
Tags: #clang, #llvm
Differential Revision: https://reviews.llvm.org/D75445
Summary:
These are exactly parallel to the existing `vadciq` intrinsics, which
we implemented last year as part of the original MVE intrinsics
framework setup.
Just like VADC/VADCI, the MVE VSBC/VSBCI instructions deliver two
outputs, both of which the intrinsic exposes: a modified vector
register and a carry flag. So they have to be instruction-selected in
C++ rather than Tablegen. However, in this case, that's trivial: the
same C++ isel routine we already have for VADC works unchanged, and
all we have to do is to pass it a different instruction id.
Reviewers: MarkMurrayARM, dmgreen, miyuki, ostannard
Reviewed By: miyuki
Subscribers: kristof.beyls, hiraditya, cfe-commits, llvm-commits
Tags: #clang, #llvm
Differential Revision: https://reviews.llvm.org/D75444
Summary:
These instructions generate a vector of consecutive elements starting
from a given base value and incrementing by 1, 2, 4 or 8. The `wdup`
versions also wrap the values back to zero when they reach a given
limit value. The instruction updates the scalar base register so that
another use of the same instruction will continue the sequence from
where the previous one left off.
At the IR level, I've represented these instructions as a family of
target-specific intrinsics with two return values (the constructed
vector and the updated base). The user-facing ACLE API provides a set
of intrinsics that throw away the written-back base and another set
that receive it as a pointer so they can update it, plus the usual
predicated versions.
Because the intrinsics return two values (as do the underlying
instructions), the isel has to be done in C++.
This is the first family of MVE intrinsics that use the `imm_1248`
immediate type in the clang Tablegen framework, so naturally, I found
I'd given it the wrong C integer type. Also added some tests of the
check that the immediate has a legal value, because this is the first
time those particular checks have been exercised.
Finally, I also had to fix a bug in MveEmitter which failed an
assertion when I nested two `seq` nodes (the inner one used to extract
the two values from the pair returned by the IR intrinsic, and the
outer one put on by the predication multiclass).
Reviewers: dmgreen, MarkMurrayARM, miyuki, ostannard
Reviewed By: dmgreen
Subscribers: kristof.beyls, hiraditya, cfe-commits, llvm-commits
Tags: #clang, #llvm
Differential Revision: https://reviews.llvm.org/D73357
The MVE_VLDRWU32_qi_pre gather loads, like the other _pre/_post mve
loads returns the writeback as result 0, the value as result 1. The llvm
ir intrinsic seems to have this the other way around though, and so when
lowering from one to the other we need to switch the first two outputs.
I've also fixed up the types of _pre/_post on normal MVE loads. There we
were already getting the values the right way around, just not for the
types. I don't believe this was causing anything to go wrong, but it was
very confusing to read in the debug output.
Differential Revision: https://reviews.llvm.org/D73370
This adds Post inc variants of the VLD2/4 and VST2/4 instructions in
MVE. It uses the same mechanism/nodes as Neon, transforming the
intrinsic+add pair into a ARMISD::VLD2_UPD, which gets selected to a
post-inc instruction. The code to do that is mostly taken from the
existing Neon code, but simplified as less variants are needed.
It also fills in some getTgtMemIntrinsic for the arm.mve.vld2/4
instrinsics, which allow the nodes to have MMO's, calculated as the full
length to the memory being loaded/stored.
Differential Revision: https://reviews.llvm.org/D71194
Summary:
Instead of generating two i32 instructions for each load or store of a volatile
i64 value (two LDRs or STRs), now emit LDRD/STRD.
These improvements cover architectures implementing ARMv5TE or Thumb-2.
Reviewers: dmgreen, efriedma, john.brawn, nickdesaulniers
Reviewed By: efriedma, nickdesaulniers
Subscribers: nickdesaulniers, vvereschaka, kristof.beyls, hiraditya, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D70072
This allows us to delete InlineAsm::Constraint_i workarounds in
SelectionDAGISel::SelectInlineAsmMemoryOperand overrides and
TargetLowering::getInlineAsmMemConstraint overrides.
They were introduced to X86 in r237517 to prevent crashes for
constraints like "=*imr". They were later copied to other targets.
Summary:
Instead of generating two i32 instructions for each load or store of a volatile
i64 value (two LDRs or STRs), now emit LDRD/STRD.
These improvements cover architectures implementing ARMv5TE or Thumb-2.
Reviewers: dmgreen, efriedma, john.brawn
Reviewed By: efriedma
Subscribers: kristof.beyls, hiraditya, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D70072
Summary:
This patch adds intrinsics for the following MVE instructions:
* VABAV
* VMLADAV, VMLSDAV
* VMLALDAV, VMLSLDAV
* VRMLALDAVH, VRMLSLDAVH
Each of the above 4 groups has a corresponding new LLVM IR intrinsic,
since the instructions cannot be easily represented using
general-purpose IR operations.
Reviewers: simon_tatham, ostannard, dmgreen, MarkMurrayARM
Reviewed By: MarkMurrayARM
Subscribers: merge_guards_bot, kristof.beyls, hiraditya, cfe-commits, llvm-commits
Tags: #clang, #llvm
Differential Revision: https://reviews.llvm.org/D71062
Summary:
This fills in the remaining shift operations that take a single vector
input and an immediate shift count: the `vqshl`, `vqshlu`, `vrshr` and
`vshll[bt]` families.
`vshll[bt]` (which shifts each input lane left into a double-width
output lane) is the most interesting one. There are separate MC
instruction ids for shifting by exactly the input lane width and
shifting by less than that, because the instruction encoding is so
completely different for the lane-width special case. So I had to
write two sets of patterns to match based on the immediate shift
count, which involved adding a ComplexPattern matcher to avoid the
general-case pattern accidentally matching the special case too. For
that family I've made sure to add an llc codegen test for both
versions of each instruction.
I'm experimenting with a new strategy for parametrising the isel
patterns for all these instructions: adding extra fields to the
relevant `Instruction` subclass itself, which are ignored by the
Tablegen backends that generate the MC data, but can be retrieved from
each instance of that instruction subclass when it's passed as a
template parameter to the multiclass that generates its isel patterns.
A nice effect of that is that I can fill in those informational fields
using `let` blocks, rather than having to type them out once per
instruction at `defm` time.
(As a result, quite a lot of existing instruction `def`s are
reindented by this patch, so it's clearer to read with whitespace
changes ignored.)
Reviewers: dmgreen, MarkMurrayARM, miyuki, ostannard
Reviewed By: MarkMurrayARM
Subscribers: kristof.beyls, hiraditya, cfe-commits, llvm-commits
Tags: #clang, #llvm
Differential Revision: https://reviews.llvm.org/D71458
This has two main effects:
- Optimizes debug info size by saving 221.86 MB of obj file size in a
Windows optimized+debug build of 'all'. This is 3.03% of 7,332.7MB of
object file size.
- Incremental step towards decoupling target intrinsics.
The enums are still compact, so adding and removing a single
target-specific intrinsic will trigger a rebuild of all of LLVM.
Assigning distinct target id spaces is potential future work.
Part of PR34259
Reviewers: efriedma, echristo, MaskRay
Reviewed By: echristo, MaskRay
Differential Revision: https://reviews.llvm.org/D71320
Summary:
This patch refactors instruction selection of the complex vector
addition, multiplication and multiply-add intrinsics, so that it is
now based on TableGen patterns rather than C++ code.
It also changes the first parameter (halving vs non-halving) of the
arm_mve_vcaddq IR intrinsic to match the corresponding instruction
encoding, hence it requires some changes in the tests.
The patch addresses David's comment in https://reviews.llvm.org/D71190
Reviewers: dmgreen, ostannard, simon_tatham, MarkMurrayARM
Reviewed By: dmgreen
Subscribers: merge_guards_bot, kristof.beyls, hiraditya, cfe-commits, llvm-commits
Tags: #clang, #llvm
Differential Revision: https://reviews.llvm.org/D71245
Summary:
This patch adds intrinsics for the following MVE instructions:
* VCADD, VHCADD
* VCMUL
* VCMLA
Each of the above 3 groups has a corresponding new LLVM IR intrinsic.
Reviewers: simon_tatham, MarkMurrayARM, ostannard, dmgreen
Reviewed By: MarkMurrayARM
Subscribers: merge_guards_bot, kristof.beyls, hiraditya, cfe-commits, llvm-commits
Tags: #clang, #llvm
Differential Revision: https://reviews.llvm.org/D71190
MVE has a basic symmetry between it's normal loads/store operations and
the masked variants. This means that masked loads and stores can use
pre-inc and post-inc addressing modes, just like the standard loads and
stores already do.
To enable that, this patch adds all the relevant infrastructure for
treating masked loads/stores addressing modes in the same way as normal
loads/stores.
This involves:
- Adding an AddressingMode to MaskedLoadStoreSDNode, along with an extra
Offset operand that is added after the PtrBase.
- Extending the IndexedModeActions from 8bits to 16bits to store the
legality of masked operations as well as normal ones. This array is
fairly small, so doubling the size still won't make it very large.
Offset masked loads can then be controlled with
setIndexedMaskedLoadAction, similar to standard loads.
- The same methods that combine to indexed loads, such as
CombineToPostIndexedLoadStore, are adjusted to handle masked loads in
the same way.
- The ARM backend is then adjusted to make use of these indexed masked
loads/stores.
- The X86 backend is adjusted to hopefully be no functional changes.
Differential Revision: https://reviews.llvm.org/D70176
This fills in the small family of MVE intrinsics that have nothing to
do with vectors: they implement bit-shift operations on 32- or 64-bit
values held in one or two general-purpose registers. Most of these
shift operations saturate if shifting left, and round to nearest if
shifting right, although LSLL and ASRL behave like ordinary shifts.
When these instructions take a variable shift count in a register,
they pay attention to its sign, so that (for example) LSLL or UQRSHLL
will shift left if given a positive number but right if given a
negative one. That makes even LSLL and ASRL different enough from
standard LLVM IR shift semantics that I couldn't see any better
alternative than to simply model the whole family as a set of
MVE-specific IR intrinsics.
(The //immediate// forms of LSLL and ASRL, on the other hand, do
behave exactly like a standard IR shift of a 64-bit value. In fact,
those forms don't have ACLE intrinsics defined at all, because you can
just write an ordinary C shift operation if you want one of those.)
The 64-bit shifts have to be instruction-selected in C++, because they
deliver two output values. But the 32-bit ones are simple enough that
I could write a DAG isel pattern directly into each Instruction
record.
Reviewers: ostannard, MarkMurrayARM, dmgreen
Reviewed By: dmgreen
Subscribers: kristof.beyls, hiraditya, cfe-commits, llvm-commits
Tags: #clang, #llvm
Differential Revision: https://reviews.llvm.org/D70319
The VST2 and VST4 instructions take two or four vector registers as
input, and store part of each register to memory in an interleaved
pattern. They come in variants indicating which part of each register
they store (VST20 and VST21; VST40 to VST43 inclusive); the intention
is that issuing each of those variants in turn has the combined effect
of loading or storing the whole set of registers to a memory block of
equal size. The corresponding VLD2 and VLD4 instructions load from
memory in the same interleaved format: each one overwrites only part
of its output register set, and again, the idea is that if you use
VLD4{0,1,2,3} or VLD2{0,1} together, you end up having written to the
whole of each register.
I've implemented the stores and loads quite differently. The loads
were easiest to implement as a single intrinsic that expands to all
four VLD4x instructions or both VLD2x, delivering four complete output
registers. (Implementing each individual load as a separate
instruction taking four input registers to partially overwrite is
possible in theory, but pointless, and when I tried it, I found it
would need extra work to get the register allocation not to be
horrible.) Since that intrinsic delivers multiple outputs, it has to
be instruction-selected in custom C++.
But the store instructions are easier to model individually, because
they don't overwrite any register at all and you can write a DAG Isel
pattern in Tablegen for each one.
Hence, my new intrinsic `int_arm_mve_vld4q` expands to four load
instructions, delivers four full output vectors, and is handled by C++
code, whereas `int_arm_mve_vst4q` expands to just one store
instruction, takes four input vectors and a constant indicating which
lanes to store, and is handled entirely in Tablegen. (And similarly
for vld2q/vst2q.) This is asymmetric, but it was the easiest way to do
each one.
Reviewers: dmgreen, miyuki, ostannard
Subscribers: kristof.beyls, hiraditya, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D68700
This adds some initial example IR intrinsics for MVE instructions that
deliver multiple output values, and hence, have to be instruction-
selected by custom C++ code instead of Tablegen patterns.
I've added the writeback gather load instructions (taking a vector of
base addresses and a single common offset, returning a vector of
loaded values and an updated vector of base addresses); one example
from the long shift family (taking and returning a 64-bit value in two
GPRs); and the VADC instruction (which propagates a carry bit from
each vector-lane addition to the next, taking an input carry flag in
FPSCR and outputting the final one in FPSCR as well).
To support the VPT-predicated forms of these instructions, I've
written some helper functions to add the cluster of MVE predicate
operands to the end of a MachineInstr. `AddMVEPredicateToOps` is used
when the instruction actually is predicated (so it takes a predicate
mask argument), and `AddEmptyMVEPredicateToOps` is for when the
instruction is unpredicated (so it fills in $noreg for the mask). Each
one comes in a form suitable for `vpred_n`, and one for `vpred_r`
which takes the extra 'inactive' parameter.
For VADC, the representation of the carry flag in the IR intrinsic is
a word intended to be moved directly to and from `FPSCR_nzcvqc`, i.e.
with the carry flag in bit 29 of the word. (The user-facing ACLE
intrinsic will want it to be in bit 0, but I'll do that on the clang
side.)
Reviewers: dmgreen, miyuki, ostannard
Subscribers: kristof.beyls, hiraditya, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D68699
We were previously using the SelectT2AddrModeImm7 for both normal and narrowing
MVE loads/stores. As the narrowing instructions do not accept sp as a register,
it makes little sense to optimise a FrameIndex into the load, only to have to
recover that later on. This adds a SelectTAddrModeImm7 which does not do that
folding, and uses it for narrowing load/store patterns.
Differential Revision: https://reviews.llvm.org/D67489
llvm-svn: 372134
Simon Pilgrim