The motivating case is seen in "splat4_v8f32_load_store" and based on code in PR42024:
https://bugs.llvm.org/show_bug.cgi?id=42024
(I haven't stepped through the v8i32 sibling test yet to see why that diverged.)
There are other potential improvements visible like allowing scalarization or vector
narrowing.
Differential Revision: https://reviews.llvm.org/D74909
There's a lot of old leftover code in LowerBRCOND. Especially
the detecting or AND or OR of X86ISD::SETCC nodes. Those were
needed before LegalizeDAG was changed to visit nodes before
their operands.
It also relied on reversing the output of LowerSETCC to find the
flags producing node to use for the X86ISD::BRCOND node.
Rather than using LowerSETCC this patch uses emitFlagsForSetcc to
handle the integer ISD::SETCC case. This gives the flag producer
and the comparison code to use directly. I've removed the addTest
flag and just produce a X86ISD::BRCOND and return immediately.
Floating point ISD::SETCC case is just an X86ISD::FCMP with special
care for OEQ and UNE derived from the previous code. I've left
f128 out so it will emit a test. And LowerSETCC will be called
later to produce a libcall and X86ISD::SETCC. We have combines
that can merge the test and X86ISD::SETCC.
We need to handle two cases for overflow ops. Either they are used
directly or they have a seteq 0 or setne 1 to invert the overflow.
The old code did not handle the setne 1 case, but I think some
other combines were making up for it.
If we fail to find a condition, we'll wrap an AND with 1 on the
original condition and tell emitFlagsForSetcc to emit a compare
with 0. This will pickup the LowerAndToBT and or the EmitTest case.
I kept the isTruncWithZeroHighBitsInput call, but we might be able
to fold that in to emitFlagsForSetcc.
Differential Revision: https://reviews.llvm.org/D74750
Only handle power of 2 element count for simplicity. Not sure what to do with vXf64->vXf16 fp_round to avoid double rounding
Differential Revision: https://reviews.llvm.org/D74886
We only need to split after type legalization. If we're before
we can just use a wide store and type legalization will split it.
Add a v128i1 test to exercise it post type legalization.
On some targets, like SPARC, forming overflow ops is only profitable if
the math result is used: https://godbolt.org/z/DxSmdB
This patch adds a new MathUsed parameter to allow the targets
to make the decision and defaults to only allowing it
if the math result is used. That is the conservative choice.
This patch also updates AArch64ISelLowering, X86ISelLowering,
ARMISelLowering.h, SystemZISelLowering.h to allow forming overflow
ops if the math result is not used. On those targets using the
overflow intrinsic for the overflow check only generates better code.
Reviewers: nikic, RKSimon, lebedev.ri, spatel
Reviewed By: lebedev.ri
Differential Revision: https://reviews.llvm.org/D74722
LoweSELECT will detect the constant inputs and convert to scalar
selects, but we can do it directly here.
I might remove some of the code from LowerSELECT and move it to
DAG combine so doing this explicitly will make us less dependent
on it happening in lowering.
This patch enables the debug entry values feature.
- Remove the (CC1) experimental -femit-debug-entry-values option
- Enable it for x86, arm and aarch64 targets
- Resolve the test failures
- Leave the llc experimental option for targets that do not
support the CallSiteInfo yet
Differential Revision: https://reviews.llvm.org/D73534
This helps this transform occur earlier so we can fold the not
with setcc. If we delay it until after type legalization we might
have introduced instructions to widen the mask if the vselect was
widened. This can prevent the not from making it to the setcc.
We could of course add more DAG combines to handle that, but
moving this earlier is easier.
D73835 will make IRBuilder no longer trivially copyable. This patch
deletes the copy constructor in advance, to separate out the breakage.
Currently, the IRBuilder copy constructor is usually used by accident,
not by intention. In rG7c362b25d7a9 I've fixed a number of cases where
functions accepted IRBuilder rather than IRBuilder &, thus performing
an unnecessary copy. In rG5f7b92b1b4d6 I've fixed cases where an
IRBuilder was copied, while an InsertPointGuard should have been used
instead.
The only non-trivial use of the copy constructor is the
getIRBForDbgInsertion() helper, for which I separated construction and
setting of the insertion point in this patch.
Differential Revision: https://reviews.llvm.org/D74693
Both of those functions only have a single caller starting
at LowerSETCC. Just handle floating point directly in LowerSETCC.
This removes the need to pass Chain and IsSignaling all the way
down.
The unseen logic diff occurs because MayFoldLoad() is defined like this:
static bool MayFoldLoad(SDValue Op) {
return Op.hasOneUse() && ISD::isNormalLoad(Op.getNode());
}
The test diffs here all seem ok to me on screen/paper, but it's hard to know
if that will lead to universally better perf for all targets. For example,
if a target implements broadcast from mem as multiple uops, we would have to
weigh the potential reduction of instructions and register pressure vs.
possible increase in number of uops. I don't know if we can make a truly
informed decision on this at compile-time.
The motivating case that I'm looking at in PR42024:
https://bugs.llvm.org/show_bug.cgi?id=42024
...resembles the diff in extract-concat.ll, but we're not going to change the
larger example there without at least 1 other fix.
Differential Revision: https://reviews.llvm.org/D74088
Without PSHUFB we are better using ROTL (expanding to OR(SHL,SRL)) than using the generic v16i8 shuffle lowering - but if we can widen to v8i16 or more then the existing shuffles are still the better option.
REAPPLIED: Original commit rG11c16e71598d was reverted at rGde1d90299b16 as it wasn't accounting for later lowering. This version emits ROTLI or the OR(VSHLI/VSRLI) directly to avoid the issue.
If we widen the compare we might trigger a spurious exception from
the garbage data.
We have two choices here. Explicitly force the upper bits to zero.
Or use a legacy VEX vcmpps/pd instruction and convert the XMM/YMM
result to mask register.
I've chosen to go with the second option. I'm not sure which is
really best. In some cases we could get rid of the zeroing since
the producing instruction probably already zeroed it. But we lose
the ability to fold a load. So which is best is dependent on
surrounding code.
Differential Revision: https://reviews.llvm.org/D74522
Summary:
This was a very odd API, where you had to pass a flag into a zext
function to say whether the extended bits really were zero or not. All
callers passed in a literal true or false.
I think it's much clearer to make the function name reflect the
operation being performed on the value we're tracking (rather than on
the KnownBits Zero and One fields), so zext means the value is being
zero extended and new function anyext means the value is being extended
with unknown bits.
NFC.
Subscribers: hiraditya, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D74482
This has a really interesting side effect in that it improves some UMAX/UMIN reduction code which had redundant XOR(SHUFFLE(XOR(X,SIGNMASK)),SIGNMASK) patterns - the getNegatibleCost recognises it as FNEG(SHUFFLE(FNEG(X))).... We have a lot of FNEG patterns bitcasted to the integer domain for XOR signbit twiddling which is similar to what we do to allow UMAX/UMIN to be lowered using SMAX/SMIN.
Differential Revision: https://reviews.llvm.org/D74231
The isNegatibleForFree/getNegatedExpression methods currently rely on a raw char value to indicate whether a negation is beneficial or not.
This patch replaces the char return value with an NegatibleCost enum to more clearly demonstrate what is implied.
It also renames isNegatibleForFree to getNegatibleCost to more accurately reflect whats going on.
Differential Revision: https://reviews.llvm.org/D74221
This patch enables the debug entry values feature.
- Remove the (CC1) experimental -femit-debug-entry-values option
- Enable it for x86, arm and aarch64 targets
- Resolve the test failures
- Leave the llc experimental option for targets that do not
support the CallSiteInfo yet
Differential Revision: https://reviews.llvm.org/D73534
This adds a strict version of FP16_TO_FP and FP_TO_FP16 and uses
them to implement soft promotion for the half type. This is
enough to provide basic support for __fp16 with strictfp.
Add the necessary X86 support to use VCVTPS2PH/VCVTPH2PS when F16C
is enabled.
We aren't doing a good job of optimizing AVX512 outside of this code. So remove the bail out for AVX512 and replace with a FIXME. This at least gets us the AVX2 codegen.
Differential Revision: https://reviews.llvm.org/D74431
Without PSHUFB we are better using ROTL (expanding to OR(SHL,SRL)) than using the generic v16i8 shuffle lowering - but if we can widen to v8i16 or more then the existing shuffles are still the better option.
We need to use vector instructions for these operations. Previously
we handled this with isel patterns that used extra instructions
and copies to handle the the conversions.
Now we use custom lowering to emit the conversions. This allows
them to be pattern matched and optimized on their own. For
example we can now emit vpextrw to store the result if its going
directly to memory.
I've forced the upper elements to VCVTPHS2PS to zero to keep some
code similar. Zeroes will be needed for strictfp. I've added a
DAG combine for (fp16_to_fp (fp_to_fp16 X)) to avoid extra
instructions in between to be closer to the previous codegen.
This is a step towards strictfp support for f16 conversions.
Non-AVX512BW targets failed to concatenate 256-bit shifts back to 512-bits (split during 512-bit shuffle lowering as they don't have v32i16/v64i8 types).
As noted on PR44379, we didn't attempt to lower vector shuffles using bit rotations on XOP/AVX512F targets.
This patch lowers to uniform ISD:ROTL nodes - ROTR isn't supported by XOP and they are interchangeable for constant values anyway.
There might be cases where targets without ISD:ROTL support would benefit from this (expanding to SRL+SHL+OR), which I'll investigate in a future patch.
REAPPLIED rGe82e17d4d4ca after reversion at rG39eade73a567 - fixed offset matching in matchShuffleAsBitRotate.
As noted on PR44379, we didn't attempt to lower vector shuffles using bit rotations on XOP/AVX512F targets.
This patch lowers to uniform ISD:ROTL nodes - ROTR isn't supported by XOP and they are interchangeable for constant values anyway.
There might be cases where targets without ISD:ROTL support would benefit from this (expanding to SRL+SHL+OR), which I'll investigate in a future patch.
Also, non-AVX512BW targets fail to concatenate 256-bit rotations back to 512-bits (split during shuffle lowering as they don't have v32i16/v64i8 types).
---
Internal shuffle tests indicate theres a bug somewhere that I haven't been able to track down yet.
Fix issue mentioned on rGe82e17d4d4ca - non-AVX512BW targets failed to concatenate 256-bit rotations back to 512-bits (split during shuffle lowering as they don't have v32i16/v64i8 types).
As noted on PR44379, we didn't attempt to lower vector shuffles using bit rotations on XOP/AVX512F targets.
This patch lowers to uniform ISD:ROTL nodes - ROTR isn't supported by XOP and they are interchangeable for constant values anyway.
There might be cases where targets without ISD:ROTL support would benefit from this (expanding to SRL+SHL+OR), which I'll investigate in a future patch.
Also, non-AVX512BW targets fail to concatenate 256-bit rotations back to 512-bits (split during shuffle lowering as they don't have v32i16/v64i8 types).
Implement protection against the stack clash attack [0] through inline stack
probing.
Probe stack allocation every PAGE_SIZE during frame lowering or dynamic
allocation to make sure the page guard, if any, is touched when touching the
stack, in a similar manner to GCC[1].
This extends the existing `probe-stack' mechanism with a special value `inline-asm'.
Technically the former uses function call before stack allocation while this
patch provides inlined stack probes and chunk allocation.
Only implemented for x86.
[0] https://www.qualys.com/2017/06/19/stack-clash/stack-clash.txt
[1] https://gcc.gnu.org/ml/gcc-patches/2017-07/msg00556.html
This a recommit of 39f50da2a3 with proper LiveIn
declaration, better option handling and more portable testing.
Differential Revision: https://reviews.llvm.org/D68720
Implement protection against the stack clash attack [0] through inline stack
probing.
Probe stack allocation every PAGE_SIZE during frame lowering or dynamic
allocation to make sure the page guard, if any, is touched when touching the
stack, in a similar manner to GCC[1].
This extends the existing `probe-stack' mechanism with a special value `inline-asm'.
Technically the former uses function call before stack allocation while this
patch provides inlined stack probes and chunk allocation.
Only implemented for x86.
[0] https://www.qualys.com/2017/06/19/stack-clash/stack-clash.txt
[1] https://gcc.gnu.org/ml/gcc-patches/2017-07/msg00556.html
This a recommit of 39f50da2a3 with proper LiveIn
declaration, better option handling and more portable testing.
Differential Revision: https://reviews.llvm.org/D68720
Remove code from LegalizeTypes that allowed this to work.
We were already using BUILD_PAIR for this in some places so this
standardizes on a single way to do this.
Implement protection against the stack clash attack [0] through inline stack
probing.
Probe stack allocation every PAGE_SIZE during frame lowering or dynamic
allocation to make sure the page guard, if any, is touched when touching the
stack, in a similar manner to GCC[1].
This extends the existing `probe-stack' mechanism with a special value `inline-asm'.
Technically the former uses function call before stack allocation while this
patch provides inlined stack probes and chunk allocation.
Only implemented for x86.
[0] https://www.qualys.com/2017/06/19/stack-clash/stack-clash.txt
[1] https://gcc.gnu.org/ml/gcc-patches/2017-07/msg00556.html
This a recommit of 39f50da2a3 with better option
handling and more portable testing
Differential Revision: https://reviews.llvm.org/D68720
This hasn't been used for years, its original implementation, D35700, had bugs that caused the reversion of most of the code, and since then x86 shuffle lowering/combining has handled most cases and can deal with the rest as well.
Implement protection against the stack clash attack [0] through inline stack
probing.
Probe stack allocation every PAGE_SIZE during frame lowering or dynamic
allocation to make sure the page guard, if any, is touched when touching the
stack, in a similar manner to GCC[1].
This extends the existing `probe-stack' mechanism with a special value `inline-asm'.
Technically the former uses function call before stack allocation while this
patch provides inlined stack probes and chunk allocation.
Only implemented for x86.
[0] https://www.qualys.com/2017/06/19/stack-clash/stack-clash.txt
[1] https://gcc.gnu.org/ml/gcc-patches/2017-07/msg00556.html
This a recommit of 39f50da2a3 with correct option
flags set.
Differential Revision: https://reviews.llvm.org/D68720
This reverts commit 39f50da2a3.
The -fstack-clash-protection is being passed to the linker too, which
is not intended.
Reverting and fixing that in a later commit.
Summary: This patch introduces an API for MemOp in order to simplify and tighten the client code.
Reviewers: courbet
Subscribers: arsenm, nemanjai, jvesely, nhaehnle, hiraditya, kbarton, jsji, kerbowa, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D73964
Implement protection against the stack clash attack [0] through inline stack
probing.
Probe stack allocation every PAGE_SIZE during frame lowering or dynamic
allocation to make sure the page guard, if any, is touched when touching the
stack, in a similar manner to GCC[1].
This extends the existing `probe-stack' mechanism with a special value `inline-asm'.
Technically the former uses function call before stack allocation while this
patch provides inlined stack probes and chunk allocation.
Only implemented for x86.
[0] https://www.qualys.com/2017/06/19/stack-clash/stack-clash.txt
[1] https://gcc.gnu.org/ml/gcc-patches/2017-07/msg00556.html
Differential Revision: https://reviews.llvm.org/D68720
X86 uses i8 for shift amounts. This code can fail on a 32-bit target
if it runs after type legalization.
This code was copied from AArch64 and modified for X86, but the
shift amount wasn't changed to the correct type for X86.
Fixes PR44812
If we don't have cmov, X87 compares write to FPSW and we need to
move the bits to EFLAGS to use as JCC/SETCC/CMOV conditions.
Previously this was done by calling ConvertCmpIfNecessary in
multiple places which would emit the extra code for the FNSTSW,
a shift, a truncate, and a SAHF instructions. Isel would then
select trunc+X86ISD::CMP to a FUCOM instruction that produces FPSW.
This patch centralizes all of the handling into a single custom
isel handler. This allows us to remove ConvertCmpIfNecessary and
a couple target specific ISD opcodes.
Differential Revision: https://reviews.llvm.org/D73863
Same for any_extend though we don't have coverage for that.
The test changes are because isel didn't check one use of the
setcc_carry. So in isel we would end up with two different
sized setcc_carry instructions. And since it clobbers
the flags we would need to recreate the flags for the second
instruction.
This code handles additional uses by truncating the new wide
setcc_carry back to the original size for those uses.
lrint/llrint are defined as rounding using the current rounding
mode. Numbers that can't be converted raise FE_INVALID and an
implementation defined value is returned. They may also write to
errno.
I believe this means we can use cvtss2si/cvtsd2si or fist to
convert as long as -fno-math-errno is passed on the command line.
Clang will leave them as libcalls if errno is enabled so they
won't become ISD::LRINT/LLRINT in SelectionDAG.
For 64-bit results on a 32-bit target we can't use cvtss2si/cvtsd2si
but we can use fist since it can write to a 64-bit memory location.
Though maybe we could consider using vcvtps2qq/vcvtpd2qq on avx512dq
targets?
gcc also does this optimization.
I think we might be able to do this with STRICT_LRINT/LLRINT as
well, but I've left that for future work.
Differential Revision: https://reviews.llvm.org/D73859
The CATCHPAD node mostly existed to be selected into the EH_RESTORE
instruction, which sets the frame back up when 32-bit Windows exceptions
return to the parent function. However, creating this MachineInstr early
increases the risk that other passes will come along and insert
instructions that use the stack before ESP and EBP are restored. That
happened in PR44697.
Instead of representing these in the instruction stream early, delay it
until PEI. Mark the blocks where this needs to happen as EHPads, but not
funclet entry blocks. Passes after PEI have to be careful not to hoist
instructions that can use stack across frame setup instructions, so this
should be relatively reliable.
Fixes PR44697
Reviewed By: hans
Differential Revision: https://reviews.llvm.org/D73752
This time with correct types for the data result from the SUB.
Original commit message:
Our normal lowering for ISD::SETCC uses X86ISD::SUB to enable
CSE unless the RHS is 0. optimizeCompareInstr called by the peephole
pass can turn subs with unused results into cmps to clean this up.
This commit makes other places that create X86ISD::CMP have the
same behavior.
This code matches (zext (trunc (setcc_carry))) -> (and (setcc_carry), 1)
but the code never checks what type we're truncating too. An and
mask of 1 would only make sense if the trunc was to MVT::i1, but
we didn't check for that.
I believe this code is a leftover from when i1 was a legal type.
Our normal lowering for ISD::SETCC uses X86ISD::SUB to enable
CSE unless the RHS is 0. optimizeCompareInstr called by the peephole
pass can turn subs with unused results into cmps to clean this up.
This commit makes other places that create X86ISD::CMP have the
same behavior.
We were creating two with different operand orders, and then only
using one of them.
Instead just swap the operands when needed and create a single node.
Summary:
This is patch is part of a series to introduce an Alignment type.
See this thread for context: http://lists.llvm.org/pipermail/llvm-dev/2019-July/133851.html
See this patch for the introduction of the type: https://reviews.llvm.org/D64790
Reviewers: courbet
Subscribers: arsenm, dschuff, jyknight, sdardis, nemanjai, jvesely, nhaehnle, sbc100, jgravelle-google, hiraditya, aheejin, kbarton, fedor.sergeev, asb, rbar, johnrusso, simoncook, sabuasal, niosHD, jrtc27, MaskRay, zzheng, edward-jones, atanasyan, rogfer01, MartinMosbeck, brucehoult, the_o, PkmX, jocewei, jsji, Jim, lenary, s.egerton, pzheng, sameer.abuasal, apazos, luismarques, kerbowa, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D73885
We only need to call this on floating point comparisons. In this
case these are known to be integer compares. One of them even
has a SUB opcode instead of CMP.
Summary: This is a first step before changing the types to llvm::Align and introduce functions to ease client code.
Reviewers: courbet
Subscribers: arsenm, sdardis, nemanjai, jvesely, nhaehnle, hiraditya, kbarton, jrtc27, atanasyan, jsji, kerbowa, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D73785
ISD::FROUND is defined to round to nearest with ties rounding
away from 0. This mode isn't supported in hardware on X86.
But as long as we aren't compiling with trapping math, we can
emulate this with floor(X + copysign(nextafter(0.5, 0.0), X)).
We have to use nextafter to avoid some corner cases that adding
0.5 would have. For example, if X is nextafter(0.5, 0.0) it should
round to 0.0, but adding 0.5 would need one extra bit of mantissa
than can be stored so it rounds to 1.0. Adding nextafter(0.5, 0.0)
instead will just increase the exponent by 1 and leave the mantissa
as all 1s. This would be nextafter(1.0, 0.0) which will floor to 0.0.
Techically this requires -fno-trapping-math which isn't our default.
But if we care about exceptions we should be using constrained
intrinsics. Constrained intrinsics would use STRICT_FROUND which
won't go through this code.
Fixes PR42195.
Differential Revision: https://reviews.llvm.org/D73607
This code needs to map from the FPCW 2-bit encoding for rounding mode to the 2-bit encoding defined for FLT_ROUNDS. The previous implementation did some clever swapping of bits and adding 1 modulo 4 to do the mapping.
This patch instead uses an 8-bit immediate as a lookup table of four 2-bit values. Then we use the 2-bit FPCW encoding to index the lookup table by using a right shift and an AND. This requires extracting the 2-bit value from FPCW and multipying it by 2 to make it usable as a shift amount. But still results in less code.
Differential Revision: https://reviews.llvm.org/D73599
Summary: X86 has instructions to calculate fma and fneg at the same time. But we combine the fneg and fma only when fneg is the source operand under strict FP.
Reviewers: craig.topper, andrew.w.kaylor, uweigand, RKSimon, LiuChen3
Subscribers: LuoYuanke, llvm-commits, cfe-commits, jdoerfert, hiraditya
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D72824
Pull out combineTargetShuffle code added in rG3fd5d1c6e7db into a helper function and extend it to handle shufps(shufps(load(),x),y) and shufps(y,shufps(load(),x)) cases as well.
Every case in the switch had a string version of themselves. Two
of them had a typo that used : instead of ::
By using a macro we can automate the string creation and avoid
the possibility of typos like this.
This is similar to what is done on the AMDGPU target.
I believe for STRICT_FP I need to use a STRICT_FP_EXTEND for the extending to f80 for returning f32/f64 in 32-bit mode when SSE is enabled. The STRICT_FP_EXTEND node requires a Chain. I need to get that node onto the chain before any CopyToRegs are emitted. This is because all the CopyToRegs are glued and chained together. So I can't put a STRICT_FP_EXTEND on the chain between the glued nodes without also glueing the STRICT_ FP_EXTEND.
This patch moves all the extend creation to a first pass and then creates the copytoregs and fills out RetOps in a second pass.
Differential Revision: https://reviews.llvm.org/D72665
Summary:
This is a follow up on https://reviews.llvm.org/D71473#inline-647262.
There's a caveat here that `Align(1)` relies on the compiler understanding of `Log2_64` implementation to produce good code. One could use `Align()` as a replacement but I believe it is less clear that the alignment is one in that case.
Reviewers: xbolva00, courbet, bollu
Subscribers: arsenm, dylanmckay, sdardis, nemanjai, jvesely, nhaehnle, hiraditya, kbarton, jrtc27, atanasyan, jsji, Jim, kerbowa, cfe-commits, llvm-commits
Tags: #clang, #llvm
Differential Revision: https://reviews.llvm.org/D73099
vperm (ins ?, X, C), (ins ?, Y, C), 0x31 --> concat X, Y
This is another shuffle problem seen with PR42024:
https://bugs.llvm.org/show_bug.cgi?id=42024
We have this small crack in legalization/lowering/combining/demanded
that allows forming a vperm2f128 of high halves with AVX1 when we
could do better by peeking through the insert_subvector nodes.
AFAICT, it requires IR as shown in the diffs - much larger than legal
vectors - to avoid all of the usual folds.
Another option would prevent forming the 256-bit vperm in lowering.
Differential Revision: https://reviews.llvm.org/D73197
Currently PromoteMaskArithemtic only looks at a single operation to
skip casts. This means we miss cases where we combine multiple masks.
This patch updates PromoteMaskArithemtic to try to recursively promote
AND/XOR/AND nodes that terminate in truncates of the right size or
constant vectors.
Reviewers: craig.topper, RKSimon, spatel
Reviewed By: RKSimon
Differential Revision: https://reviews.llvm.org/D72524
Summary:
I think whatever problem the gluing was fixing has long since been fixed. We don't have any of the restrictions on FP stack stuff that existed back when this was first added.
I had to change which type we use for FILD in BuildFILD when X86 was enabled because most of the isel patterns block f32/f64 instructions when SSE1/SSE2 are enabled. So I needed to use the f80 pattern, but this shouldn't have an effect the generated code since there is only one FILD instruction anyway. We already use f80 explicitly in other other places.
Reviewers: RKSimon, spatel
Reviewed By: RKSimon
Subscribers: andrew.w.kaylor, scanon, hiraditya, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D72805
This is another part of a problem noted in PR42024:
https://bugs.llvm.org/show_bug.cgi?id=42024
The AVX2 code may use awkward 256-bit shuffles vs. the AVX code that gets split
into the expected 128-bit unpack instructions. We have to be selective in
matching the types where we try to do this though. Otherwise, we can end up
with more instructions (in the case of v8x32/v4x64).
Differential Revision: https://reviews.llvm.org/D72575
The code is trying to copy the i64 value to an xmm register to
use a 64-bit store so that the 64-bit fild can benefit from
store forwarding.
But this trick only works if f64 is going to be stored in an
XMM register. If we only have SSE1 then only float is in xmm
register. So this trick just causes 2 stores i32 stores, an f64
load into the x87, an f64 from x87, and a 64-bit fild. So we end
up with an extra stack temporary and still didn't get store forwarding.
We might be able to use v2f32 here instead, but I didn't check. I
just wanted the code to make sense.
Found by inspection as I continue to stare too hard at our
int_to_fp conversions.
We were performing an emulated i32->f64 in the SSE registers, then
storing that value to memory and doing a extload into the X87
domain.
After this patch we'll now just store the i32 to memory along
with an i32 0. Then do a 64-bit FILD to f80 completely in the X87
unit. This matches what we do without SSE.
Pass small FP values in GPRs or stack memory according the the normal
convention. This is what gcc -mno-sse does on Win64.
I adjusted the conditions under which we emit an error to check if the
argument or return value would be passed in an XMM register when SSE is
disabled. This has a side effect of no longer emitting an error for FP
arguments marked 'inreg' when targetting x86 with SSE disabled. Our
calling convention logic was already assigning it to FP0/FP1, and then
we emitted this error. That seems unnecessary, we can ignore 'inreg' and
compile it without SSE.
Reviewers: jyknight, aemerson
Differential Revision: https://reviews.llvm.org/D70465
This allows us to generate better code for selecting the fixup
to load.
Previously when the sign was set we had to load offset 0. And
when it was clear we had to load offset 4. This required a testl,
setns, zero extend, and finally a mul by 4. By switching the offsets
we can just shift the sign bit into the lsb and multiply it by 4.
By directly emitting the constants as a constant pool load we seem to avoid the build_vector/extract_subvector combines that resulted in the duplicate loads we had before.
Differential Revision: https://reviews.llvm.org/D72307
Only perform this if we are shuffling lower and upper lane elements across the lanes (otherwise splitting to lower xmm shuffles would be better).
This is a regression if we shuffle build_vectors due to getVectorShuffle canonicalizing 'blend of splat' build vectors, for now I've set this not to shuffle build_vector nodes at all to avoid this.
This causes the STRICT_FSETCC/STRICT_FSETCCS nodes to lowered
early while lowering SELECT, but the output chain doesn't get
connected. Then we visit the node again when it is its turn
because we haven't replaced the use of the chain result. In the
case of the fp128 libcall lowering, after D72341 this will cause
the libcall to be emitted twice.
Add initial support for lowering v4f64 shuffles to SHUFPD(VPERM2F128(V1, V2), VPERM2F128(V1, V2)), eventually this could be used for v8f32 (and maybe v8f64/v16f32) but I'm being conservative for the initial implementation as only v4f64 can always succeed.
This currently is only called from lowerShuffleAsLanePermuteAndShuffle so only gets used for unary shuffles, and we limit this to cases where we use upper elements as otherwise concating 2 xmm shuffles is probably the better case.
Helps with poor shuffles mentioned in D66004.
We only use lowerShuffleAsLanePermuteAndShuffle for unary shuffles at the moment, but we should consistently handle lane index calculations for multiple inputs in both the AVX1 and AVX2 paths.
Minor (almost NFC) tidyup as I'm hoping to use lowerShuffleAsLanePermuteAndShuffle for binary shuffles soon.
Only PPC seems to be using it, and only checks some simple cases and
doesn't distinguish between FP. Just switch to using LLT to simplify
use from GlobalISel.
For v4i64->v4f32 uint_to_fp on pre-avx targets where v4i64 isn't legal we create to v2i64->v2f32 uint_to_fp that need to be shuffled together. Our codegen for v2i64->v2f32 involves detecting if the number is larger than (2^31 - 1), if so we do a special divison by 2 so we can do a signed conversion which we need to scalarize, then do a multiply by 2 at the end if we divided earlier.
When v4i64 isn't legal we need to split the checking for a larger number and dividing by 2 into two v2i64 vectors. The scalar part can extract the 4 i64 values from those 4 splits. But we can reassemble the 4 scalar f32 results directly into a single v432 vector. Then we just need to combine the fixup indications from the 2 halves and we can do the final multiply by 2 fixup on all 4 values if needed at once using a single v4f32 blend and v4f32 fadd.
Differential Revision: https://reviews.llvm.org/D72368
Now that we generate decent code for (v2i64 (setlt zero, X)) on pre-sse4.2 targets I think we can use this now.
Differential Revision: https://reviews.llvm.org/D72354
Similar to D72302 but for the canonical form for the opposite case. I've changed foldVectorXorShiftIntoCmp to form a target independent setcc node instead of PCMPGT now and enabled its for v2i64 on pre-SSE4.2 targets. The setcc should eventually get lowered to PCMPGT or the new v2i64 sequence.
Differential Revision: https://reviews.llvm.org/D72318
Without sse4.2 a v2i64 setlt needs to expand into a pcmpgtd, pcmpeqd, 3 shuffles, and 2 logic ops. But if we're only interested in the sign bit of the i64 elements, we can just use one pcmpgtd and shuffle the odd elements to the even elements.
Differential Revision: https://reviews.llvm.org/D72302
Summary:
Based on Simon's D52965, but improved to handle strict fp and improve some of the shuffling.
Rather than use v2i1/v4i1 and let type legalization continue, just generate all the code with legal types and use an explicit shuffle.
I also added an explicit setcc to the v4i64 code to match the semantics of vselect which doesn't just use the sign bit. I'm also using a v4i64->v4i32 truncate instead of the shuffle in Simon's original code. With the setcc this will become a pack.
Future work can look into using X86ISD::BLENDV and a different shuffle that only moves the sign bit.
Reviewers: RKSimon, spatel
Reviewed By: RKSimon
Subscribers: hiraditya, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D71956
Attempt to use combineLogicBlendIntoConditionalNegate for (select M, (sub 0, X), X) -> (sub (xor X, M), M)
We limit this to cases that can't easily replace the VSELECT with a shuffle (non-constant masks) or where a BLENDV is likely to occur (which tends to result in slower codegen).
This uses an alternative implementation of this conversion derived
from our v2i32->v2f32 handling. We can zero extend the v2i32 to
v2i64, or it with the bit representation of 2.0^52 which will give
us 2.0^52 plus the 32-bit integer since double's mantissa is 52 bits.
Then we just need to subtract 2.0^52 as a double and let the floating
point unit normalize the remaining bits into a valid double.
This is less instructions then our previous code, but does require
a port 5 shuffle for the zero extend or unpack.
Differential Revision: https://reviews.llvm.org/D71945
When the "disable-tail-calls" attribute was added, checks were added for
it in various backends. Now this code has proliferated, and it is
something the target is responsible for checking. Move that
responsibility back to the ISels (fast, global, and SD).
There's no major functionality change, except for targets that never
implemented this check.
This LLVM attribute was originally added in
d9699bc7bd (2015).
Reviewers: echristo, MaskRay
Differential Revision: https://reviews.llvm.org/D72118
Summary:
We previously disabled this under fast math due to aggressive
reassociation by the machine combiner. But I think we can work
around this by using a FSUB instead of FADD for the first
operation.
This matches the similar algorithm we do for uint_to_fp i64->f64
in TargetLowering::expandUINT_TO_FP. If reassociation hasn't
been a problem for that, hopefully its not a problem here.
Reviewers: RKSimon, spatel, scanon
Reviewed By: spatel
Subscribers: hiraditya, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D71968
Summary:
After bugfix the undef value case here, we used more operations to implement inserting vxi1 sub vector into vXi1 vector, I optimize it by use less operations.
The history information at https://reviews.llvm.org/D68311
Reviewers: craig.topper, LuoYuanke, yubing, annita.zhang, pengfei, LiuChen3, RKSimon
Reviewed By: craig.topper
Subscribers: hiraditya, llvm-commits
Patch by Xiang Zhang (xiangzhangllvm)
Differential Revision: https://reviews.llvm.org/D71917
If we just subtracted 1 and are checking if the result is -1. We can use the carry flag from the ADD instead of an explicit CMP. I'm using the same checks for the add users as EmitTest.
Fixes one case from PR44412
Differential Revision: https://reviews.llvm.org/D72019
If the return value is a struct of 2 doubles we need two return
registers.
If SSE2 is disabled we can't return in XMM registers like the ABI says.
After logging an error we attempt to recover by using FP0 instead
of an XMM register. But if the return needs two registers, we may have
already used FP0. So if the register we were supposed to copy to is
XMM1, copy to FP1 in the recovery instead.
This seems to fix the assertion/crash in PR44413.
These nodes should only ever be formed with an i8 TargetConstant
so we don't need to check for it to be a constant. It's also
always 8-bits so we don't need to use APInt compare functions.
We had a Custom operation action for v4i32 on SSE1. But since
v4i32 isn't legal until SSE2 this was not what was intended. The
code that get executed was intended for op legalization and
creates a bunch of v4i32 nodes that all end up scalarized.
Summary:
Previously we did this with isel patterns that used garbage in
the widened part of the source. But that's not valid for strictfp.
So now we custom widen and use zeroes for the widened elemens for
strictfp.
This replaces D71864.
Reviewers: RKSimon, spatel, andrew.w.kaylor, pengfei, LiuChen3
Reviewed By: pengfei
Subscribers: hiraditya, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D71879
I believe the algorithm we use for non-strict is exception safe
for strict. The fsub won't generate any exceptions. After it we
will have an exact version of the i32 integer in a double. Then
we just round it to f32. That rounding will generate a precision
exception if it can't be represented exactly.
Previously we widened these through isel patterns, but that
didn't work for STRICT_ nodes. Those need to be padded with
zeroes in the upper bits which is harder to do in isel patterns.
Previously we were widening with isel patterns, but that wasn't
exception safe for strict FP. So now we widen to v4i32->v4f64
during type legalization. And then let op legalization further
widen to v8i32->v8f64.
The vec_int_to_fp.ll changes are caused by us no longer narrowing
extracts of strict_uint_to_fp to the v4i32->v2f64 instruction
without AVX512VL only to have isel rewiden it. Now we just keep
it wide throughout. So we don't have an opportunity to narrow
the load.
AVX512F added instruction for vector fp_to_uint conversions. With
AVX512VL we can use a specific instruction that does v2f64->v4i32 with
zeroes in the 2 extra elements. For non-strict nodes without AVX512VL
we relied on type legalization to turn it to v4f64->v4i32 which would
later be widened by op legalization to v8f64->v8i32. But type legalization
doesn't currently widen strict nodes since it doesn't know how to
safely and efficiently pad the extra elements. But for X86 we know
padding with zeroes is safe and efficient so do that ourselves.
In the worst case, this requires a 128-bit move instruction to
implicitly zero the upper bits. In the common case, we should
recognize the producing instruction already zeroed the upper bits.
On 32-bit targets we can't use the scalar instruction so we
insert the scalar into a vector and use packed conversions.
Previously we used either v4f32->v4i64 or v4f64->v4i64 to avoid
some complexity creating target specific ISD opcodes for
v4f32->v2i64. But this causes extra vzeroupper instructions and
possibly frequency throttling on Intel CPUs.
This patch changes this to create a 128-bit vector and uses a
target specific ISD opcode if needed.
Fix several several additional problems with the int <-> FP conversion
logic both in common code and in the X86 target. In particular:
- The STRICT_FP_TO_UINT expansion emits a floating-point compare. This
compare can raise exceptions and therefore needs to be a strict compare.
I've made it signaling (even though quiet would also be correct) as
signaling is the more usual default for an LT. This code exists both
in common code and in the X86 target.
- The STRICT_UINT_TO_FP expansion algorithm was incorrect for strict mode:
it emitted two STRICT_SINT_TO_FP nodes and then used a select to choose one
of the results. This can cause spurious exceptions by the STRICT_SINT_TO_FP
that ends up not chosen. I've fixed the algorithm to use only a single
STRICT_SINT_TO_FP instead.
- The !isStrictFPEnabled logic in DoInstructionSelection would sometimes do
the wrong thing because it calls getOperationAction using the result VT.
But for some opcodes, incuding [SU]INT_TO_FP, getOperationAction needs to
be called using the operand VT.
- Remove some (obsolete) code in X86DAGToDAGISel::Select that would mutate
STRICT_FP_TO_[SU]INT to non-strict versions unnecessarily.
Reviewed by: craig.topper
Differential Revision: https://reviews.llvm.org/D71840
This moves the X86 specific transform from rL364407
into DAGCombiner to generically handle 'little to big' cases
(for example: extract_subvector(v2i64 bitcast(v16i8))). This
allows us to remove both the x86 implementation and the aarch64
bitcast(extract_subvector(bitcast())) combine.
Earlier patches that dealt with regressions initially exposed
by this patch:
rG5e5e99c041e4
rG0b38af89e2c0
Patch by: @RKSimon (Simon Pilgrim)
Differential Revision: https://reviews.llvm.org/D63815
The setcc operands are copied into LHS and RHS variables at the top of the function. We also capture the condition code.
A later piece of code swaps the operands and changing the CC variable as part of a canonicalization to make some other checks simpler. But we might not make the transform we canonicalized for. So we continue on through the function where we can use the swapped LHS/RHS variables and access the original condition code operand instead of the modified CC variable. This leads to a setcc being created with the original condition code, but with swapped operands.
To mitigate this, this patch does a couple things. The LHS/RHS/CC variables are made const to keep them from being modified like this again. The transform that needs the swap now uses temporary copies of the variables. And the transform that used the original condition code operand has been altered to use the CC variable we cached originally. Either of these changes are enough to fix the issue, but doing both to make this code very safe.
I also considered rewriting the swap code in some way to check both permutations without explicitly swapping or needing temporary variables, but held off on that.
Differential Revision: https://reviews.llvm.org/D71736
The only thing its getting from the X86TargetLowering class is
the subtarget which we can easily pass. This function only has
one call site now since this might help the compiler inline it.
Explicitly return both the flag result and the chain result for
STRICT_FCMP nodes. This removes an assumption in the caller that
getValue(1) is the right way to get the chain.
EmitCmp will just immediately call EmitTest and discard the null
constant only to have EmitTest create it again if it doesn't fold.
So just skip all that and go directly to EmitTest.
of integers to floating point.
This includes some of Craig Topper's changes for promotion support from
D71130.
Differential Revision: https://reviews.llvm.org/D69275
Summary:
The use of a boolean isInteger flag (generally initialized using
VT.isInteger()) caused errors in our out-of-tree CHERI backend
(https://github.com/CTSRD-CHERI/llvm-project).
In our backend, pointers use a separate ValueType (iFATPTR) and therefore
.isInteger() returns false. This meant that getSetCCInverse() was using the
floating-point variant and generated incorrect code for us:
`(void *)0x12033091e < (void *)0xffffffffffffffff` would return false.
Committing this change will significantly reduce our merge conflicts
for each upstream merge.
Reviewers: spatel, bogner
Reviewed By: bogner
Subscribers: wuzish, arsenm, sdardis, nemanjai, jvesely, nhaehnle, hiraditya, kbarton, jrtc27, atanasyan, jsji, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D70917
This is an alternate fix for the bug discussed in D70595.
This also includes minimal tests for other in-tree targets
to show the problem more generally.
We check the number of uses as a predicate for whether some
value is free to negate, but that use count can change as we
rewrite the expression in getNegatedExpression(). So something
that was marked free to negate during the cost evaluation
phase becomes not free to negate during the rewrite phase (or
the inverse - something that was not free becomes free).
This can lead to a crash/assert because we expect that
everything in an expression that is negatible to be handled
in the corresponding code within getNegatedExpression().
This patch skips the use check during the rewrite phase.
So we determine that some expression isNegatibleForFree
(identically to without this patch), but during the rewrite,
don't rely on use counts to decide how to create the optimal
expression.
Differential Revision: https://reviews.llvm.org/D70975
Summary: This is a follow up of D69281, it enables the X86 backend support for the FP comparision.
Reviewers: uweigand, kpn, craig.topper, RKSimon, cameron.mcinally, andrew.w.kaylor
Subscribers: hiraditya, llvm-commits, annita.zhang, LuoYuanke, LiuChen3
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D70582
This reverts 3e1aee2ba7 in favor
of a different approach.
Scalarizing isn't great codegen, but making the type illegal was
interfering with k constraint in inline assembly.
The xor'ing behaviour is only used for msvc/crt environments, when we're targeting
macho the guard load code doesn't know about the xor in the epilog. Disable xor'ing
when targeting win32-macho to be consistent.
Differential Revision: https://reviews.llvm.org/D71095
D53794 introduced code to perform the FP_TO_UINT expansion via FP_TO_SINT in a way that would never expose floating-point exceptions in the intermediate steps. Unfortunately, I just noticed there is still a way this can happen. As discussed in D53794, the compiler now generates this sequence:
// Sel = Src < 0x8000000000000000
// Val = select Sel, Src, Src - 0x8000000000000000
// Ofs = select Sel, 0, 0x8000000000000000
// Result = fp_to_sint(Val) ^ Ofs
The problem is with the Src - 0x8000000000000000 expression. As I mentioned in the original review, that expression can never overflow or underflow if the original value is in range for FP_TO_UINT. But I missed that we can get an Inexact exception in the case where Src is a very small positive value. (In this case the result of the sub is ignored, but that doesn't help.)
Instead, I'd suggest to use the following sequence:
// Sel = Src < 0x8000000000000000
// FltOfs = select Sel, 0, 0x8000000000000000
// IntOfs = select Sel, 0, 0x8000000000000000
// Result = fp_to_sint(Val - FltOfs) ^ IntOfs
In the case where the value is already in range of FP_TO_SINT, we now simply compute Val - 0, which now definitely cannot trap (unless Val is a NaN in which case we'd want to trap anyway).
In the case where the value is not in range of FP_TO_SINT, but still in range of FP_TO_UINT, the sub can never be inexact, as Val is between 2^(n-1) and (2^n)-1, i.e. always has the 2^(n-1) bit set, and the sub is always simply clearing that bit.
There is a slight complication in the case where Val is a constant, so we know at compile time whether Sel is true or false. In that scenario, the old code would automatically optimize the sub away, while this no longer happens with the new code. Instead, I've added extra code to check for this case and then just fall back to FP_TO_SINT directly. (This seems to catch even slightly more cases.)
Original version of the patch by Ulrich Weigand. X86 changes added by Craig Topper
Differential Revision: https://reviews.llvm.org/D67105
Summary:
musttail calls should not require allocating extra stack for arguments.
Updates to arguments passed in memory should happen in place before the
epilogue.
This bug was mostly a missed optimization, unless inalloca was used and
store to push conversion fired.
If a reserved call frame was used for an inalloca musttail call, the
call setup and teardown instructions would be deleted, and SP
adjustments would be inserted in the prologue and epilogue. You can see
these are removed from several test cases in this change.
In the case where the stack frame was not reserved, i.e. call frame
optimization fires and turns argument stores into pushes, then the
imbalanced call frame setup instructions created for inalloca calls
become a problem. They remain in the instruction stream, resulting in a
call setup that allocates zero bytes (expected for inalloca), and a call
teardown that deallocates the inalloca pack. This deallocation was
unbalanced, leading to subsequent crashes.
Reviewers: hans
Subscribers: hiraditya, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D71097
We shouldn't assume that the returned result can be used to get
the other result.
This is prep-work for strict FP where we will also need to pass
the chain result along in more cases.
I suspect this became unnecessary after r354161. Prior to that
we may have been going through the default expansion of FP_TO_UINT
on 64-bit targets and then ending up back in Custom X86 handling
to handle the FP_TO_SINT for it. Now we just Custom handle the
FP_TO_UINT directly. We already need to handle it for 32-bit mode
during type legalization so we wouldn't save any code by using
the default expansion on 64-bit.
Summary:
This follows a previous patch that changes the X86 datalayout to represent
mixed size pointers (32-bit sext, 32-bit zext, and 64-bit) with address spaces
(https://reviews.llvm.org/D64931)
This patch implements the address space cast lowering to the corresponding
sign extension, zero extension, or truncate instructions.
Related to https://bugs.llvm.org/show_bug.cgi?id=42359
Reviewers: rnk, craig.topper, RKSimon
Subscribers: hiraditya, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D69639
This is the following patch of D68854.
This patch adds basic operations of X87 instructions, including +, -, *, / , fp extensions and fp truncations.
Patch by Chen Liu(LiuChen3)
Differential Revision: https://reviews.llvm.org/D68857
MVE has a basic symmetry between it's normal loads/store operations and
the masked variants. This means that masked loads and stores can use
pre-inc and post-inc addressing modes, just like the standard loads and
stores already do.
To enable that, this patch adds all the relevant infrastructure for
treating masked loads/stores addressing modes in the same way as normal
loads/stores.
This involves:
- Adding an AddressingMode to MaskedLoadStoreSDNode, along with an extra
Offset operand that is added after the PtrBase.
- Extending the IndexedModeActions from 8bits to 16bits to store the
legality of masked operations as well as normal ones. This array is
fairly small, so doubling the size still won't make it very large.
Offset masked loads can then be controlled with
setIndexedMaskedLoadAction, similar to standard loads.
- The same methods that combine to indexed loads, such as
CombineToPostIndexedLoadStore, are adjusted to handle masked loads in
the same way.
- The ARM backend is then adjusted to make use of these indexed masked
loads/stores.
- The X86 backend is adjusted to hopefully be no functional changes.
Differential Revision: https://reviews.llvm.org/D70176
Returning SDValue() means we didn't handle it and the common
code should try to expand it. But its a target intrinsic so
expanding won't do anything and just leave the node alone. But
it will print confusing debug messages.
By returning Op we tell the common code that the node is legal
and shouldn't receive any further processing.
These need to emit a libcall like we do for the non-strict version.
32-bit mode needs to SoftenFloat support to be implemented for strict FP nodes.
Differential Revision: https://reviews.llvm.org/D70504
Add explicit setOperation actions for some to match their none
strict counterparts. This isn't required, but makes the code
self documenting that we didn't forget about strict fp. I've
used LibCall instead of Expand since that's more explicitly what
we want.
Only lrint/llrint/lround/llround are missing now.
The custom code just emits a libcall, but we can do the same
with generic code. The only difference is that the generic code
can form tail calls where the custom code couldn't. This is
responsible for the test changes.
This avoids needing to modify the Custom handling for strict fp.
The Custom handler doesn't do anything for these nodes anyway.
SelectionDAGISel won't mutate them if they are Legal or Custom.
X86 has custom code for mutating them due to missing isel patterns.
When the isel patterns are added Legal will be the right answer.
So go ahead a change it now since that's where we'll end up.
AL is only used for varargs on SysV platforms. Don't forward it on
Windows. This allows control flow guard to set up an extra hidden
parameter in RAX, as described in PR44049.
This also has the effect of freeing up RAX for use in virtual member
pointer thunks, which may also be a nice little code size improvement on
Win64.
Fixes PR44049
Reviewers: ajpaverd, efriedma, hans
Differential Revision: https://reviews.llvm.org/D70413
This is a first pass at Custom lowering for these operations. I also updated some of the vector code where it was obviously easy and straightforward. More work needed in follow up.
This enables these operations to be handled with X87 where special rounding control adjustments are needed to perform a truncate.
Still need to fix Promotion in the target independent code in LegalizeDAG.
llrint/llround split into separate test file because we can't make a strict libcall properly yet either and we need to do that when i64 isn't a legal type.
This does not include any isel support. So we still rely on the mutation in SelectionDAGIsel to remove the strict from this stuff later. Except for the X87 stuff which goes through custom nodes that already had chains.
Differential Revision: https://reviews.llvm.org/D70214
AMDGPU needs to know the FP mode for the function to answer this
correctly when this is removed from the subtarget.
AArch64 had to make this more complicated by using this from an IR
hook, so add an IR typed overload.
As detailed in PR43971/D70267, the use of XFormVExtractWithShuffleIntoLoad causes issues where we end up in infinite loops of extract(targetshuffle(vecload)) -> extract(shuffle(vecload)) -> extract(vecload) -> extract(targetshuffle(vecload)), there are just too many legalization checks at every stage that we can't guarantee that extract(shuffle(vecload)) -> scalarload can occur.
At the moment we see a number of minor regressions as we don't fold extract(shuffle(vecload)) -> scalarload before legal ops, these can be addressed in future patches and extension of X86ISelLowering's combineExtractWithShuffle.
* Implements scalable size queries for MVTs, split out from D53137.
* Contains a fix for FindMemType to avoid using scalable vector type
to contain non-scalable types.
* Explicit casts for several places where implicit integer sign
changes or promotion from 32 to 64 bits caused problems.
* CodeGenDAGPatterns will treat scalable and non-scalable vector types
as different.
Reviewers: greened, cameron.mcinally, sdesmalen, rovka
Reviewed By: rovka
Differential Revision: https://reviews.llvm.org/D66871
The Promote action doesn't apply until LegalizeDAG. By the time
we get there, we would have already softened all the FP operations
if useSoftFloat was true. So there wouldn't be any operation left
to Promote.
This is no longer needed after widening legalization as we
custom legalize v8i8 ourselves.
Added entries to the cost model, but bumped the cost slightly
to account for the truncate shuffle that wasn't costed before.
Otherwise just let the v64i8/v32i16 types be split to v32i8/v16i16.
In reality this shouldn't happen because it means we have a 512-bit
vector argument, but min-legal-vector-width says a value less than
512. But a 512-bit argument should have been factored into the
preferred vector width.
MVT::i1 should be removed by type legalization before we reach
any code that would act on the promote action.
Mainly to avoid replicating this for strict FP versions of these
operations.
If we're using soft floats, then these operations shoudl be
softened during type legalization. They'll never get to
LegalizeVectorOps or LegalizeDAG so they don't need to be
Expanded there.
We had some code for this for 32-bit ARM, but this doesn't really need
to be in target-specific code; generalize it.
(I think this started showing up recently because we added an
optimization that converts pow to powi.)
Differential Revision: https://reviews.llvm.org/D69013
The MMX intrinsics for shift by immediate take a 32-bit shift
amount but the hardware for shifting by immediate only encodes
8-bits. For the intrinsic we don't require the shift amount to
fit in 8-bits in the frontend because we don't check that its an
immediate in the frontend. If its is not an immediate we move it
to an MMX register and use the shift by register.
But if it is an immediate we'll use the shift by immediate
instruction. But we need to change the shift amount to 8-bits.
We were previously doing this accidentally by masking it in the
encoder. But this can make a large shift amount into a small
in bounds shift amount. Instead we should clamp larger shift
amounts to 255 so that the they don't become in bounds.
Fixes PR43922
PVS Studio noticed that we were asserting "VT.getVectorNumElements() == VT.getVectorNumElements()" instead of "VT.getVectorNumElements() == InVT.getVectorNumElements()".
When writing an email for a follow up proposal, I realized one of the diffs in the committed change was incorrect. Digging into it revealed that the fix is complicated enough to require some thought, so reverting in the meantime.
The problem is visible in this diff (from the revert):
; X64-SSE-LABEL: store_fp128:
; X64-SSE: # %bb.0:
-; X64-SSE-NEXT: movaps %xmm0, (%rdi)
+; X64-SSE-NEXT: subq $24, %rsp
+; X64-SSE-NEXT: .cfi_def_cfa_offset 32
+; X64-SSE-NEXT: movaps %xmm0, (%rsp)
+; X64-SSE-NEXT: movq (%rsp), %rsi
+; X64-SSE-NEXT: movq {{[0-9]+}}(%rsp), %rdx
+; X64-SSE-NEXT: callq __sync_lock_test_and_set_16
+; X64-SSE-NEXT: addq $24, %rsp
+; X64-SSE-NEXT: .cfi_def_cfa_offset 8
; X64-SSE-NEXT: retq
store atomic fp128 %v, fp128* %fptr unordered, align 16
ret void
The problem here is three fold:
1) x86-64 doesn't guarantee atomicity of anything larger than 8 bytes. Some platforms observably break this guarantee, others don't, but the codegen isn't considering this, so it's wrong on at least some platforms.
2) When I started to track down the problem, I discovered that DAGCombiner had stripped the atomicity off the store entirely. This comes down to idiomatic usage of DAG.getStore passing all MMO components separately as opposed to just passing the MMO.
3) On x86 (not -64), there are cases where 8 byte atomiciy is supported, but only for floating point operations. This would seem to imply that operation typing matters for correctness, and DAGCombine happily folds away bitcasts. I'm not 100% sure there's a problem here, but I'm not entirely sure there isn't either.
I plan on returning to each issue in turn; sorry for the churn here.
If we don't demand all elements, then attempt to combine to a simpler shuffle.
At the moment we can only do this if Depth == 0 as combineX86ShufflesRecursively uses Depth to track whether the shuffle has really changed or not - we'll need to change this before we can properly start merging combineX86ShufflesRecursively into SimplifyDemandedVectorElts (see D66004).
This reapplies rL368307 (reverted at rL369167) after the fix for the infinite loop reported at PR43024 was applied at rG3f087e38a2e7b87a5adaaac1c1b61e51220e7ff3
This stops infinite loops where KnownUndef elements are converted to Zeroable, resulting in KnownZero elements which are then simplified (via SimplifyDemandedElts etc.) back to KnownUndef elements........
Prep fix for PR43024 which will allow rL368307 to be re-applied.
This doesn't affect actual codegen, but is a minor refactor toward fixing PR43024 where we need to avoid excess changes (folding zeroables etc.) to the shuffle mask at Depth == 0.
Previously we marked zeroable elements in a way that prevented
the widening check from recognizing that it could widen. Now
we only mark them zeroable if V2 is an all zeros vector. This
matches what we do for widening elements in lowerVectorShuffle.
Fixes PR43866.
Teach combineVectorSizedSetCCEquality() to handle arbitrary memcmp
expansions but do not change any default policy for now.
This also fixes a bug in the memcmp expansion itself when large
displacements are needed.
https://reviews.llvm.org/D69507
Enable the new SelectionDAG representation for unordered loads and stores introduced in r371441 by default. As a reminder, the new lowering changes the representation of an unordered atomic load from an AtomicSDNode - which is essentially a black box which gets passed through without combines messing with it - to a LoadSDNode w/a atomic marker on the MMO. The later parallels the way we handle volatiles, and I've audited the code to ensure that every location which checks one checks the other.
This has been fairly heavily fuzzed, and I examined diffs in a reasonable large corpus of assembly by hand, so I'm reasonable sure this is correct for the common case. Late in the review for this, it was discovered that I hadn't correctly handled cases which could be legalized into CAS operations. This points out that there's a strong bias in the IR of the frontend I'm working with towards only legal atomics. If there are problems with this patch, the most likely area will be legalization.
Differential Revision: https://reviews.llvm.org/D69219
This catches some cases. There are probably ways to improve this.
I tried doing it as a combine on the setcc, but that broke
some cases involving flag reuse in place of test.
I renamed the isX86CCUnsigned to isX86CCSigned and flipped its
polarity to make it consistent with the similar functions for
ISD::SETCC. This avoids calling EQ/NE as being signed or unsigned.
Fixes PR43823.
Differential Revision: https://reviews.llvm.org/D69499
The legalization of v2i1->i2 or v4i1->i4 bitcasts followed by a setcc can create an and after the bitcast. If we're lucky enough that the input to the bitcast is a concat_vectors where the first operand is a setcc that can natively 0 all the upper bits of ak-register, then we should replace the other operands of the concat_vectors with zero in order to remove the AND.
With the AND removed we might be able to use a kortest on the result.
Differential Revision: https://reviews.llvm.org/D69205
PTEST and especially the MOVMSK instructions are slow on Knights Landing
or later. As a bonus, this patch increases instruction parallelism by
emitting:
KORTEST(PCMPNEQ(a, b), PCMPNEQ(c, d)) == 0
Instead of:
KORTEST(AND(PCMPEQ(a, b), PCMPEQ(c, d))) == ~0
https://reviews.llvm.org/D69157
tryToWidenViaDuplication lowers using the shuffle_v8i16(unpack_v16i8(shuffle_v8i16(x),shuffle_v8i16(x))) pattern, but the unpack only needs the even/odd 16i8 args if the original v16i8 shuffle mask references the even/odd elements - which isn't true for many extension style shuffles.
llvm-svn: 375342
We were always generating a single source HADDPD, but really we should only do this if shouldUseHorizontalOp says its a good idea.
Differential Revision: https://reviews.llvm.org/D69175
llvm-svn: 375341
Add generic DAG combine for extending masked loads.
Allow us to generate sext/zext masked loads which can access v4i8,
v8i8 and v4i16 memory to produce v4i32, v8i16 and v4i32 respectively.
Differential Revision: https://reviews.llvm.org/D68337
llvm-svn: 375085
Exposes an issue in getFauxShuffleMask where the OR(SHUFFLE,SHUFFLE) decode should always resolve zero/undef elements.
Part of the fix for PR43024 where ideally we shouldn't call resolveTargetShuffleAndZeroables for Depth == 0
llvm-svn: 374928
The only things VBROADCAST_LOAD uses is an address and a chain
node. It has no vector inputs.
So if its a user of the source of another broadcast that could
only mean one of two things. The other broadcast is broadcasting
the address of the broadcast_load. Or the source is a load and
the use we're seeing is the chain result from that load. Neither
of these cases make sense to combine here.
This issue was reported post-commit r373871. Test case has not
been reduced yet.
llvm-svn: 374862
This prevents isel from emitting a TEST instruction that
optimizeCompareInstr will need to remove later.
In some of the modified tests, the SUB gets duplicated due to
the flags being needed in two places and being clobbered in
between. optimizeCompareInstr was able to optimize away the TEST
that was using the result of one of them, but optimizeCompareInstr
doesn't know to turn SUB into CMP after removing the TEST. It
only knows how to turn SUB into CMP if the result was already
dead.
With this change the TEST never exists, so optimizeCompareInstr
doesn't have to remove it. Then it can just turn the SUB into
CMP immediately.
Fixes PR43649.
llvm-svn: 374755
We were already controlling whether the KnownZero elements were being written to the target mask, this extends it to the KnownUndef elements as well so we can prevent the target shuffle mask being manipulated at all.
llvm-svn: 374732
This enables use of the saturating truncate instructions when the
result type is less than 128 bits. It also enables the use of
saturating truncate instructions on KNL when the input is less
than 512 bits. We can do this by widening the input and then
extracting the result.
llvm-svn: 374731
This seems to improve std::midpoint code where we have a min and
a max with the same condition. If we split the setcc we can end
up with two compares if the one of the operands is a constant.
Since we aggressively canonicalize compares with constants.
For non-constants it can interfere with our ability to share
control flow if we need to expand cmovs into control flow.
I'm also not sure I understand this min/max canonicalization code.
The motivating case talks about comparing with 0. But we don't
check for 0 explicitly.
Removes one instruction from the codegen for PR43658.
llvm-svn: 374706
Since the input type is larger than 256-bits we'll need to some
concatenating to reassemble the results. The pack instructions
ability to concatenate while packing make this a shorter/faster
sequence.
llvm-svn: 374643
We already did this for VTRUNCUS with a specific combination of
types. This extends this to VTRUNCS and handles any types where
a truncating store is legal.
llvm-svn: 374615
If we don't have VLX we won't end up selecting a saturating
truncate for 256-bit or smaller vectors so we should just use
the pack lowering.
llvm-svn: 374487
When handling the packus pattern for i32->i8 we do a two step
process using a packss to i16 followed by a packus to i8. If the
final i8 step is a type with less than 64-bits the packus step
will return SDValue(), but the i32->i16 step might have succeeded.
This leaves the nodes from the middle step dangling.
Guard against this by pre-checking that the number of elements is
at least 8 before doing the middle step.
With that check in place this should mean the only other
case the middle step itself can fail is when SSE2 is disabled. So
add an early SSE2 check then just assert that neither the middle
or final step ever fail.
llvm-svn: 374460
If we've disable zmm registers, the v16i32 will need to be split. This split will propagate through min/max the truncate. This creates two sequences that need to be concatenated back to v16i8. We can instead use packusdw to do part of the clamping, truncating, and concatenating all at once. Then we can use a vpmovuswb to finish off the clamp.
Differential Revision: https://reviews.llvm.org/D68763
llvm-svn: 374431
As background, starting in D66309, I'm working on support unordered atomics analogous to volatile flags on normal LoadSDNode/StoreSDNodes for X86.
As part of that, I spent some time going through usages of LoadSDNode and StoreSDNode looking for cases where we might have missed a volatility check or need an atomic check. I couldn't find any cases that clearly miscompile - i.e. no test cases - but a couple of pieces in code loop suspicious though I can't figure out how to exercise them.
This patch adds defensive checks and asserts in the places my manual audit found. If anyone has any ideas on how to either a) disprove any of the checks, or b) hit the bug they might be fixing, I welcome suggestions.
Differential Revision: https://reviews.llvm.org/D68419
llvm-svn: 374261
Gather instructions can use i32 or i64 elements for indices. If
the index is zero extended from a type smaller than i32 to i64, we
can shrink the extend to just extend to i32.
llvm-svn: 373982
When the target option GuaranteedTailCallOpt is specified, calls with
the fastcc calling convention will be transformed into tail calls if
they are in tail position. This diff adds a new calling convention,
tailcc, currently supported only on X86, which behaves the same way as
fastcc, except that the GuaranteedTailCallOpt flag does not need to
enabled in order to enable tail call optimization.
Patch by Dwight Guth <dwight.guth@runtimeverification.com>!
Reviewed By: lebedev.ri, paquette, rnk
Differential Revision: https://reviews.llvm.org/D67855
llvm-svn: 373976
If a fp scalar is loaded and then used as both a scalar and a vector broadcast, perform the load as a broadcast and then extract the scalar for 'free' from the 0th element.
This involved switching the order of the X86ISD::BROADCAST combines so we only convert to X86ISD::BROADCAST_LOAD once all other canonicalizations have been attempted.
Adds a DAGCombinerInfo::recursivelyDeleteUnusedNodes wrapper.
Fixes PR43217
Differential Revision: https://reviews.llvm.org/D68544
llvm-svn: 373871
Replaces setTargetShuffleZeroElements with getTargetShuffleAndZeroables which reports the Zeroable elements but doesn't merge them into the decoded target shuffle mask (the merging has been moved up into getTargetShuffleInputs until we can get rid of it entirely).
This is part of the work to fix PR43024 and allow us to use SimplifyDemandedElts to simplify shuffle chains - we need to get to a point where the target shuffle mask isn't adjusted by its source inputs but instead we cache them in a parallel Zeroable mask.
llvm-svn: 373867
Summary:
The default legalization for v16i64->v16i8 tries to create a multiple stage truncate concatenating after each stage and truncating again. But avx512 implements truncates with multiple uops. So it should be better to truncate all the way to the desired element size and then concatenate the pieces using unpckl instructions. This minimizes the number of 2 uop truncates. The unpcks are all single uop instructions.
I tried to handle this by just custom splitting the v16i64->v16i8 shuffle. And hoped that the DAG combiner would leave the two halves in the state needed to make D68374 do the job for each half. This worked for the first half, but the second half got messed up. So I've implemented custom handling for v8i64->v8i8 when v8i64 needs to be split to produce the VTRUNCs directly.
Reviewers: RKSimon, spatel
Reviewed By: RKSimon
Subscribers: hiraditya, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D68428
llvm-svn: 373864
We can make use of the Zeroable mask to indicate which elements we can safely set to zero instead of creating a target shuffle mask on the fly.
This allows us to remove createTargetShuffleMask.
This is part of the work to fix PR43024 and allow us to use SimplifyDemandedElts to simplify shuffle chains - we need to get to a point where the target shuffle masks isn't adjusted by its source inputs in setTargetShuffleZeroElements but instead we cache them in a parallel Zeroable mask.
llvm-svn: 373846
As discussed on PR42025, with more complex boolean math we can end up with many truncations/extensions of the comparison results through each bitop.
This patch handles the cases introduced in combineBitcastvxi1 by pushing the sign extension through the AND/OR/XOR ops so its just the original SETCC ops that gets extended.
Differential Revision: https://reviews.llvm.org/D68226
llvm-svn: 373834
Rename some variables to match lowerShuffleAsRepeatedMaskAndLanePermute - prep work toward adding some equivalent sublane functionality.
llvm-svn: 373832
We already do this for ISD::TRUNCATE, but we can do the same for X86ISD::VTRUNC
Differential Revision: https://reviews.llvm.org/D68432
llvm-svn: 373765
This patch recognizes the shuffle pattern we get from a
v8i64->v8i8 truncate when v8i64 isn't a legal type.
With VLX we can use two VTRUNCs, unpckldq, and a insert_subvector.
Diffrential Revision: https://reviews.llvm.org/D68374
llvm-svn: 373645
We can make use of the Zeroable mask to indicate which elements we can safely set to zero instead of creating a target shuffle mask on the fly.
This only leaves one user of createTargetShuffleMask which we can hopefully get rid of in a similar manner.
This is part of the work to fix PR43024 and allow us to use SimplifyDemandedElts to simplify shuffle chains - we need to get to a point where the target shuffle masks isn't adjusted by its source inputs in setTargetShuffleZeroElements but instead we cache them in a parallel Zeroable mask.
llvm-svn: 373641
This improves broadcast load folding of i64 elements on 32-bit
targets where i64 isn't legal.
Previously we had to represent these as vXf64 vbroadcast_loads and
a bitcast to vXi64. But we didn't have any isel patterns
looking for that.
This also allows us to remove or simplify some isel patterns that
were looking for bitcasted vbroadcast_loads.
llvm-svn: 373566
The previous code tried to do a trick where we would extract the subvector from the location we were inserting. Then xor that with the new value. Take the xored value and clear out the bits above the subvector size. Then shift that xored subvector to the insert location. And finally xor that with the original vector. Since the old subvector was used in both xors, this would leave just the new subvector at the inserted location. Since the surrounding bits had been zeroed no other bits of the original vector would be modified.
Unfortunately, if the old subvector came from undef we might aggressively propagate the undef. Then we end up with the XORs not cancelling because they aren't using the same value for the two uses of the old subvector. @bkramer gave me a case that demonstrated this, but we haven't reduced it enough to make it easily readable to see what's happening.
This patch uses a safer, but more costly approach. It isolate the bits above the insertion and bits below the insert point and ORs those together leaving 0 for the insertion location. Then widens the subvector with 0s in the upper bits, shifts it into position with 0s in the lower bits. Then we do another OR.
Differential Revision: https://reviews.llvm.org/D68311
llvm-svn: 373495
The gather/scatter instructions can implicitly sign extend the indices. If we're operating on 32-bit data, an v16i64 index can force a v16i32 gather to be split in two since the index needs 2 registers. If we can shrink the index to the i32 we can avoid the split. It should always be safe to shrink the index regardless of the number of elements. We have gather/scatter instructions that can use v2i32 index stored in a v4i32 register with v2i64 data size.
I've limited this to before legalize types to avoid creating a v2i32 after type legalization. We could check for it, but we'd also need testing. I'm also only handling build_vectors with no bitcasts to be sure the truncate will constant fold.
Differential Revision: https://reviews.llvm.org/D68247
llvm-svn: 373408
Summary:
This adds the ISD opcode and a DAG combine to create it. There are
probably some places where we can directly create it, but I'll
leave that for future work.
This updates all of the isel patterns to look for this new node.
I had to add a few additional isel patterns for aligned extloads
which we should probably fix with a DAG combine or something. This
does mean that the broadcast load folding for avx512 can no
longer match a broadcasted aligned extload.
There's still some work to do here for combining a broadcast of
a broadcast_load. We also need to improve extractelement or
demanded vector elements of a broadcast_load. I'll try to get
those done before I submit this patch.
Reviewers: RKSimon, spatel
Reviewed By: RKSimon
Subscribers: hiraditya, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D68198
llvm-svn: 373349
Replace with the MachineFunction. X86 is the only user, and only uses
it for the function. This removes one obstacle from using this in
GlobalISel. The other is the more tolerable EVT argument.
The X86 use of the function seems questionable to me. It checks hasFP,
before frame lowering.
llvm-svn: 373292
The i1 scalar would have been type legalized to i8, but that
doesn't guarantee anything about the upper bits. If we're going
to use it as condition we need to make sure the upper bits are 0.
I've special cased ISD::SETCC conditions since that should
guarantee zero upper bits. We could go further and use
computeKnownBits, but we have no tests that would need that.
Fixes PR43507.
llvm-svn: 373246
ANY_EXTEND of v8i8 is marked Custom on AVX512 for handling extends
from v8i8. But the type legalization infrastructure will call
ReplaceNodeResults for v8i8 results. We should just defer it the
default handling instead of asserting in the default of the switch.
Fixes PR43509.
llvm-svn: 373234
This was added back to allow some performance regressions to be
investigated. The main perf issue was fixed shortly after adding
this back and no other major issues have been reported. So I
think its safe to remove this again.
llvm-svn: 373174
Creating new nodes is what we usually do. Have to explicitly
check that we don't update to an existing node and having
to manually manage the worklist is unusual.
We can probably add a helper function to reduce the duplication
of having to check if we should create a gather or scatter, but
I wanted to just get the simple thing done.
llvm-svn: 373137
The majority of the code doesn't run on the X86 nodes today since
its gated by isBeforeLegalizeOps and we don't formm X86 nodes
until after that. Except for a couple special case in type
legalization. But I think we would probably break those if
some of the transforms fire on them.
I want to remove the hardcoded operand numbers and the unusual
use of UpdateNodeOperands. Being able to know which ISD opcodes
are present should help with that.
llvm-svn: 373136
This removes the need for ConvertToTarget opcodes in the isel table.
It's also consistent with the recent changes to use TargetConstant
for intrinsic nodes that always take immediates.
Differential Revision: https://reviews.llvm.org/D67902
llvm-svn: 372645
The attached test case would previous infinite loop after
r365711.
I'm going to move this to X86ISelDAGToDAG.cpp to get the setcc
to match VPTEST in 32-bit mode in a follow up commit.
llvm-svn: 372543
This allows us to use timm in the isel table which is more
consistent with other intrinsics that take an immediate now.
We can't declare the intrinsic as taking an ImmArg because we
need to match non-constants to the shift by MMX register
instruction which we do by mutating the intrinsic id during
lowering.
llvm-svn: 372537
This intrinsics should be shift by immediate, but gcc allows any
i32 scalar and clang needs to match that. So we try to detect the
non-constant case and move the data from an integer register to an
MMX register.
Previously this was done by creating a v2i32 build_vector and
bitcast in SelectionDAGBuilder. This had to be done early since
v2i32 isn't a legal type. The bitcast+build_vector would be DAG
combined to X86ISD::MMX_MOVW2D which isel will turn into a
GPR->MMX MOVD.
This commit just moves the whole thing to lowering and emits
the X86ISD::MMX_MOVW2D directly to avoid the illegal type. The
test changes just seem to be due to nodes being linearized in a
different order.
llvm-svn: 372535
This reverts commit 52621307bc.
Tests have been failing all night with
[0/2] ACTION //llvm/test:check-llvm(//llvm/utils/gn/build/toolchain:unix)
-- Testing: 33647 tests, 64 threads --
Testing: 0 .. 10..
UNRESOLVED: LLVM :: CodeGen/AMDGPU/GlobalISel/isel-blendi-gettargetconstant.ll (6943 of 33647)
******************** TEST 'LLVM :: CodeGen/AMDGPU/GlobalISel/isel-blendi-gettargetconstant.ll' FAILED ********************
Test has no run line!
********************
Since there were other concerns on https://reviews.llvm.org/D67785,
I'm just reverting for now.
llvm-svn: 372383
We reuse an ISD opcode here that can be reached from BMI that
doesn't require it to be an immediate. Our isel patterns to match
the TBM immediate form require a Constant and not a TargetConstant.
We were accidentally getting the Constant due to a quirk of
combineBEXTR calling SimplifyDemandedBits. The call to
SimplifyDemandedBits ended up constant folding the TargetConstant
to a regular Constant. But we should probably instead be asserting
if SimplifyDemandedBits on a TargetConstant so we shouldn't rely
on this behavior.
llvm-svn: 372373
Summary: This fixes a crasher introduced by r372338.
Reviewers: echristo, arsenm
Subscribers: jvesely, wdng, nhaehnle, hiraditya, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D67785
Tighten up the test case.
llvm-svn: 372366
The later code that generates a constant when there are
some non-const elements works basically the same and doesn't
require there to be any non-const elements.
llvm-svn: 372365
This reverts r372314, reapplying r372285 and the commits which depend
on it (r372286-r372293, and r372296-r372297)
This was missing one switch to getTargetConstant in an untested case.
llvm-svn: 372338
This patch converts the DAGCombine isNegatibleForFree/GetNegatedExpression into overridable TLI hooks and includes a demonstration X86 implementation.
The intention is to let us extend existing FNEG combines to work more generally with negatible float ops, allowing it work with target specific combines and opcodes (e.g. X86's FMA variants).
Unlike the SimplifyDemandedBits, we can't just handle target nodes through a Target callback, we need to do this as an override to allow targets to handle generic opcodes as well. This does mean that the target implementations has to duplicate some checks (recursion depth etc.).
I've only begun to replace X86's FNEG handling here, handling FMADDSUB/FMSUBADD negation and some low impact codegen changes (some FMA negatation propagation). We can build on this in future patches.
Differential Revision: https://reviews.llvm.org/D67557
llvm-svn: 372333
This broke the Chromium build, causing it to fail with e.g.
fatal error: error in backend: Cannot select: t362: v4i32 = X86ISD::VSHLI t392, Constant:i8<15>
See llvm-commits thread of r372285 for details.
This also reverts r372286, r372287, r372288, r372289, r372290, r372291,
r372292, r372293, r372296, and r372297, which seemed to depend on the
main commit.
> Encode them directly as an imm argument to G_INTRINSIC*.
>
> Since now intrinsics can now define what parameters are required to be
> immediates, avoid using registers for them. Intrinsics could
> potentially want a constant that isn't a legal register type. Also,
> since G_CONSTANT is subject to CSE and legalization, transforms could
> potentially obscure the value (and create extra work for the
> selector). The register bank of a G_CONSTANT is also meaningful, so
> this could throw off future folding and legalization logic for AMDGPU.
>
> This will be much more convenient to work with than needing to call
> getConstantVRegVal and checking if it may have failed for every
> constant intrinsic parameter. AMDGPU has quite a lot of intrinsics wth
> immarg operands, many of which need inspection during lowering. Having
> to find the value in a register is going to add a lot of boilerplate
> and waste compile time.
>
> SelectionDAG has always provided TargetConstant for constants which
> should not be legalized or materialized in a register. The distinction
> between Constant and TargetConstant was somewhat fuzzy, and there was
> no automatic way to force usage of TargetConstant for certain
> intrinsic parameters. They were both ultimately ConstantSDNode, and it
> was inconsistently used. It was quite easy to mis-select an
> instruction requiring an immediate. For SelectionDAG, start emitting
> TargetConstant for these arguments, and using timm to match them.
>
> Most of the work here is to cleanup target handling of constants. Some
> targets process intrinsics through intermediate custom nodes, which
> need to preserve TargetConstant usage to match the intrinsic
> expectation. Pattern inputs now need to distinguish whether a constant
> is merely compatible with an operand or whether it is mandatory.
>
> The GlobalISelEmitter needs to treat timm as a special case of a leaf
> node, simlar to MachineBasicBlock operands. This should also enable
> handling of patterns for some G_* instructions with immediates, like
> G_FENCE or G_EXTRACT.
>
> This does include a workaround for a crash in GlobalISelEmitter when
> ARM tries to uses "imm" in an output with a "timm" pattern source.
llvm-svn: 372314
Encode them directly as an imm argument to G_INTRINSIC*.
Since now intrinsics can now define what parameters are required to be
immediates, avoid using registers for them. Intrinsics could
potentially want a constant that isn't a legal register type. Also,
since G_CONSTANT is subject to CSE and legalization, transforms could
potentially obscure the value (and create extra work for the
selector). The register bank of a G_CONSTANT is also meaningful, so
this could throw off future folding and legalization logic for AMDGPU.
This will be much more convenient to work with than needing to call
getConstantVRegVal and checking if it may have failed for every
constant intrinsic parameter. AMDGPU has quite a lot of intrinsics wth
immarg operands, many of which need inspection during lowering. Having
to find the value in a register is going to add a lot of boilerplate
and waste compile time.
SelectionDAG has always provided TargetConstant for constants which
should not be legalized or materialized in a register. The distinction
between Constant and TargetConstant was somewhat fuzzy, and there was
no automatic way to force usage of TargetConstant for certain
intrinsic parameters. They were both ultimately ConstantSDNode, and it
was inconsistently used. It was quite easy to mis-select an
instruction requiring an immediate. For SelectionDAG, start emitting
TargetConstant for these arguments, and using timm to match them.
Most of the work here is to cleanup target handling of constants. Some
targets process intrinsics through intermediate custom nodes, which
need to preserve TargetConstant usage to match the intrinsic
expectation. Pattern inputs now need to distinguish whether a constant
is merely compatible with an operand or whether it is mandatory.
The GlobalISelEmitter needs to treat timm as a special case of a leaf
node, simlar to MachineBasicBlock operands. This should also enable
handling of patterns for some G_* instructions with immediates, like
G_FENCE or G_EXTRACT.
This does include a workaround for a crash in GlobalISelEmitter when
ARM tries to uses "imm" in an output with a "timm" pattern source.
llvm-svn: 372285
This generates worse code, but matches what is done for avx2 and
prevents crashes when more arguments are passed than we have
registers for.
llvm-svn: 372200
The case were Immediate is 0 and HasConstElts is true should never
happen since that would mean the constant elts were all zero. But
we check for all zero build vector earlier. So just use HasConstElts
and blindly take Immediate without checking if its 0.
Move the code that bitcasts and extract the immediate into the
the HasConstElts case since the other code just creates an undef
with the right type. No casting needed.
llvm-svn: 372153
* Reordered MVT simple types to group scalable vector types
together.
* New range functions in MachineValueType.h to only iterate over
the fixed-length int/fp vector types.
* Stopped backends which don't support scalable vector types from
iterating over scalable types.
Reviewers: sdesmalen, greened
Reviewed By: greened
Differential Revision: https://reviews.llvm.org/D66339
llvm-svn: 372099
Previously we tried to split them into narrower v64i1 or v16i1
pieces that each got promoted to vXi8 and then passed in a zmm
or xmm register. But this crashes when you need to pass more
pieces than available registers reserved for argument passing.
The scalarizing done here generates much longer and slower code,
but is consistent with the behavior of avx2 and earlier targets
for these types.
Fixes PR43323.
llvm-svn: 372069
Some prep work for PR42863, this change allows us to move all the FMA opcode mappings into the negateFMAOpcode helper.
For the FMADDSUB/FMSUBADD cases, we can only negate the accumulator - any other negations will result in an error.
llvm-svn: 371840
The X86 decision assumes the compare will produce a result in an XMM
register, but that can't happen for an fp128 compare since those
go to a libcall the returns an i32. Pass the VT so X86 can check
the type.
llvm-svn: 371775
I found three issues:
1. the loop over E[ABCD]X copies run over BB start
2. the direct address of cmpxchg8b could be a frame index
3. the displacement of cmpxchg8b could be a global instead of an
immediate
These were all introduced together in r287875, and should be fixed with
this change.
Issue reported by Zachary Turner.
llvm-svn: 371678
fp128 is considered a legal type for a register, but has almost no legal operations so everything needs to be converted to a libcall. Previously this was implemented by tricking type legalization into softening the operations with various checks for "is legal in hardware register" to change the behavior to still use f128 as the resulting type instead of converting to i128.
This patch abandons this approach and instead moves the libcall conversions to LegalizeDAG. This is the approach taken by AArch64 where they also have a legal fp128 type, but no legal operations. I think this is more in spirit with how SelectionDAG's phases are supposed to work.
I had to make some hacks for STRICT_FP_ROUND because some of the strict FP handling checks if ISD::FP_ROUND is Legal for a given result type, but I had to make ISD::FP_ROUND Custom to allow making a libcall when the input is f128. For all other types the Custom handler just returns the original node. These hacks are incomplete and don't work for a strict truncate from f128, but I don't think it worked before either since LegalizeFloatTypes doesn't know about strict ops yet. I've also raised PR43209 against AArch64 which currently crashes on a strict ftrunc from f64->f32 because of FP_ROUND being marked Custom for the same reason there.
Differential Revision: https://reviews.llvm.org/D67128
llvm-svn: 371672
See D66309 for context.
This is the first sweep of x86 target specific code to add isAtomic bailouts where appropriate. The intention here is to have the switch from AtomicSDNode to LoadSDNode/StoreSDNode be close to NFC; that is, I'm not looking to allow additional optimizations at this time.
Sorry for the lack of tests. As discussed in the review, most of these are vector tests (for which atomicity is not well defined) and I couldn't figure out to exercise the anyextend cases which aren't vector specific.
Differential Revision: https://reviews.llvm.org/D66322
llvm-svn: 371547
This is the first patch in a large sequence. The eventual goal is to have unordered atomic loads and stores - and possibly ordered atomics as well - handled through the normal ISEL codepaths for loads and stores. Today, there handled w/instances of AtomicSDNodes. The result of which is that all transforms need to be duplicated to work for unordered atomics. The benefit of the current design is that it's harder to introduce a silent miscompile by adding an transform which forgets about atomicity. See the thread on llvm-dev titled "FYI: proposed changes to atomic load/store in SelectionDAG" for further context.
Note that this patch is NFC unless the experimental flag is set.
The basic strategy I plan on taking is:
introduce infrastructure and a flag for testing (this patch)
Audit uses of isVolatile, and apply isAtomic conservatively*
piecemeal conservative* update generic code and x86 backedge code in individual reviews w/tests for cases which didn't check volatile, but can be found with inspection
flip the flag at the end (with minimal diffs)
Work through todo list identified in (2) and (3) exposing performance ops
(*) The "conservative" bit here is aimed at minimizing the number of diffs involved in (4). Ideally, there'd be none. In practice, getting it down to something reviewable by a human is the actual goal. Note that there are (currently) no paths which produce LoadSDNode or StoreSDNode with atomic MMOs, so we don't need to worry about preserving any behaviour there.
We've taken a very similar strategy twice before with success - once at IR level, and once at the MI level (post ISEL).
Differential Revision: https://reviews.llvm.org/D66309
llvm-svn: 371441
Current for SAE instructions we only allow _MM_FROUND_CUR_DIRECTION(bit 2) or _MM_FROUND_NO_EXC(bit 3) to be used as the immediate passed to the inrinsics. But these instructions don't perform rounding so _MM_FROUND_CUR_DIRECTION is just sort of a default placeholder when you don't want to suppress exceptions. Using _MM_FROUND_NO_EXC by itself is really bit equivalent to (_MM_FROUND_NO_EXC | _MM_FROUND_TO_NEAREST_INT) since _MM_FROUND_TO_NEAREST_INT is 0. Since we aren't rounding on these instructions we should also accept (_MM_FROUND_CUR_DIRECTION | _MM_FROUND_NO_EXC) as equivalent to (_MM_FROUND_NO_EXC). icc allows this, but gcc does not.
Differential Revision: https://reviews.llvm.org/D67289
llvm-svn: 371430
This patch decodes target and faux shuffles with getTargetShuffleInputs - a reduced version of resolveTargetShuffleInputs that doesn't resolve SM_SentinelZero cases, so we can correctly remove zero vectors if they aren't demanded.
llvm-svn: 371353
If the two zero vectors have undefs in different places they
won't get combined by simplifySelect.
This fixes a regression from an earlier commit.
llvm-svn: 371351
The change to avx512-vec-cmp.ll is a regression, but should be
easy to fix. It occurs because the getZeroVector call was
canonicalizing both sides to the same node, then SimplifySelect
was able to simplify it. But since only called getZeroVector
on some VTs this isn't a robust way to combine this.
The change to vector-shuffle-combining-ssse3.ll is more
instructions, but removes a constant pool load so its unclear
if its a regression or not.
llvm-svn: 371350
This generalizes the existing <32 x i1> pre-AVX2 split code to support reductions from <64 x i1> as well, we can probably generalize to any larger pow2 case in the future if the (unlikely) need ever arises.
We still need to tweak combineBitcastvxi1 to improve AVX512F codegen as its assumes vXi1 types should be handled on the mask registers even when they aren't legal.
Differential Revision: https://reviews.llvm.org/D67070
llvm-svn: 371328
isel used to require zero vectors to be canonicalized to a single
type to minimize the number of patterns needed to match. This is
no longer required.
I plan to do this to integers too, but floating point was simpler
to start with. Integer has a complication where v32i16/v64i8 aren't
legal when the other 512-bit integer types are.
llvm-svn: 371325
Use getAPIntValue() directly - this is mainly a best practice style issue to help prevent fuzz tests blowing up when a i12345 (or whatever) is generated.
Use getConstantOperandVal/getConstantOperandAPInt wrappers where possible.
llvm-svn: 371315
Fix for https://bugs.llvm.org/show_bug.cgi?id=43230.
When creating PSHUFLW from a repeated shuffle mask, we have to apply
the checks to the repeated mask, not the original one. For the test
case from PR43230 the inspected part of the original mask is all undef.
Differential Revision: https://reviews.llvm.org/D67314
llvm-svn: 371307
Summary:
This is patch is part of a series to introduce an Alignment type.
See this thread for context: http://lists.llvm.org/pipermail/llvm-dev/2019-July/133851.html
See this patch for the introduction of the type: https://reviews.llvm.org/D64790
Reviewers: courbet
Subscribers: nemanjai, javed.absar, hiraditya, kbarton, asb, rbar, johnrusso, simoncook, apazos, sabuasal, niosHD, jrtc27, MaskRay, zzheng, edward-jones, rogfer01, MartinMosbeck, brucehoult, the_o, PkmX, jocewei, jsji, s.egerton, pzheng, ychen, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D67267
llvm-svn: 371212
As noted in PR43197, we can use test+add+cmov+sra to implement
signed division by a power of 2.
This is based off the similar version in AArch64, but I've
adjusted it to use target independent nodes where AArch64 uses
target specific CMP and CSEL nodes. I've also blocked INT_MIN
as the transform isn't valid for that.
I've limited this to i32 and i64 on 64-bit targets for now and only
when CMOV is supported. i8 and i16 need further investigation to be
sure they get promoted to i32 well.
I adjusted a few tests to enable cmov to demonstrate the new
codegen. I also changed twoaddr-coalesce-3.ll to 32-bit mode
without cmov to avoid perturbing the scenario that is being
set up there.
Differential Revision: https://reviews.llvm.org/D67087
llvm-svn: 371104
As discussed on D64551 and PR43227, we don't correctly handle cases where the base load has a non-zero byte offset.
Until we can properly handle this, we must bail from EltsFromConsecutiveLoads.
llvm-svn: 371078
Summary:
This patch renames functions that takes or returns alignment as log2, this patch will help with the transition to llvm::Align.
The renaming makes it explicit that we deal with log(alignment) instead of a power of two alignment.
A few renames uncovered dubious assignments:
- `MirParser`/`MirPrinter` was expecting powers of two but `MachineFunction` and `MachineBasicBlock` were using deal with log2(align). This patch fixes it and updates the documentation.
- `MachineBlockPlacement` exposes two flags (`align-all-blocks` and `align-all-nofallthru-blocks`) supposedly interpreted as power of two alignments, internally these values are interpreted as log2(align). This patch updates the documentation,
- `MachineFunctionexposes` exposes `align-all-functions` also interpreted as power of two alignment, internally this value is interpreted as log2(align). This patch updates the documentation,
Reviewers: lattner, thegameg, courbet
Subscribers: dschuff, arsenm, jyknight, dylanmckay, sdardis, nemanjai, jvesely, nhaehnle, javed.absar, hiraditya, kbarton, fedor.sergeev, asb, rbar, johnrusso, simoncook, apazos, sabuasal, niosHD, jrtc27, MaskRay, zzheng, edward-jones, atanasyan, rogfer01, MartinMosbeck, brucehoult, the_o, dexonsmith, PkmX, jocewei, jsji, Jim, s.egerton, llvm-commits, courbet
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D65945
llvm-svn: 371045
This reverts r370525 (git commit 0bb1630685)
Also reverts r370543 (git commit 185ddc08ee)
The approach I took only works for functions marked `noreturn`. In
general, a call that is not known to be noreturn may be followed by
unreachable for other reasons. For example, there could be multiple call
sites to a function that throws sometimes, and at some call sites, it is
known to always throw, so it is followed by unreachable. We need to
insert an `int3` in these cases to pacify the Windows unwinder.
I think this probably deserves its own standalone, Win64-only fixup pass
that runs after block placement. Implementing that will take some time,
so let's revert to TrapUnreachable in the mean time.
llvm-svn: 370829
This merges the 32-bit and 64-bit mode code to just use Custom
for both i32 and i64. We already had most of the handling in
the custom handling due to the AVX512 having legal fp_to_uint.
Just needed to add the i32->i64 promotion handling. Refactor
the fp_to_uint code in the custom handler to simplify the
number of times we check things.
Tweak cost model tables to match the default handling we were
getting due to Expand before.
llvm-svn: 370700
Use Custom lowering instead. Fall back to default expansion only
when the scalar FP type belongs in an XMM register. This improves
lowering for i32 to fp80, and also i32 to double on SSE1 only.
llvm-svn: 370699
FP128 values are passed in xmm registers so should be asssociated
with an SSE feature rather than MMX which uses a different set
of registers.
llc enables sse1 and sse2 by default with x86_64. But does not
enable mmx. Clang enables all 3 features by default.
I've tried to add command lines to test with -sse
where possible, but any test that returns a value in an xmm
register fails with a fatal error with -sse since we have no
defined ABI for that scenario.
llvm-svn: 370682
Rename to lowerShuffleAsLanePermuteAndShuffle to make it clear that not just blends are performed.
Cleanup the in-lane shuffle mask generation to make it more obvious what's going on.
Some prep work noticed while investigating the poor shuffle code mentioned in D66004.
llvm-svn: 370613
EltsFromConsecutiveLoads was assuming that the number of input elts was the same as the number of elements in the output vector type when creating a zeroing shuffle, causing an assert when subvectors were being combined instead of just scalars.
llvm-svn: 370592
Users have complained llvm.trap produce two ud2 instructions on Win64,
one for the trap, and one for unreachable. This change fixes that.
TrapUnreachable was added and enabled for Win64 in r206684 (April 2014)
to avoid poorly understood issues with the Windows unwinder.
There seem to be two major things in play:
- the unwinder
- C++ EH, _CxxFrameHandler3 & co
The unwinder disassembles forward from the return address to scan for
epilogues. Inserting a ud2 had the effect of stopping the unwinder, and
ensuring that it ran the EH personality function for the current frame.
However, it's not clear what the unwinder does when the return address
happens to be the last address of one function and the first address of
the next function.
The Visual C++ EH personality, _CxxFrameHandler3, needs to figure out
what the current EH state number is. It does this by consulting the
ip2state table, which maps from PC to state number. This seems to go
wrong when the return address is the last PC of the function or catch
funclet.
I'm not sure precisely which system is involved here, but in order to
address these real or hypothetical problems, I believe it is enough to
insert int3 after a call site if it would otherwise be the last
instruction in a function or funclet. I was able to reproduce some
similar problems locally by arranging for a noreturn call to appear at
the end of a catch block immediately before an unrelated function, and I
confirmed that the problems go away when an extra trailing int3
instruction is added.
MSVC inserts int3 after every noreturn function call, but I believe it's
only necessary to do it if the call would be the last instruction. This
change inserts a pseudo instruction that expands to int3 if it is in the
last basic block of a function or funclet. I did what I could to run the
Microsoft compiler EH tests, and the ones I was able to run showed no
behavior difference before or after this change.
Differential Revision: https://reviews.llvm.org/D66980
llvm-svn: 370525
gcc and icc pass these types in zmm registers in zmm registers.
This patch implements a quick hack to override the register
type before calling convention handling to one that is legal.
Longer term we might want to do something similar to 256-bit
integer registers on AVX1 where we just split all the operations.
Fixes PR42957
Differential Revision: https://reviews.llvm.org/D66708
llvm-svn: 370495
ISD::isBuildVectorAllZeros permits undef elements to be present, which means we can't return it as a zero vector. PMULDQ/PMULUDQ is an extending multiply so a multiply by zero of the lower 32-bits should result in a zero 64-bit element.
llvm-svn: 370404
Summary:
We were previously doing it in DAGCombine.
But we also want to do `sub %x, C` -> `add %x, (sub 0, C)` for vectors in DAGCombine.
So if we had `sub %x, -1`, we'll transform it to `add %x, 1`,
which `combineIncDecVector()` will immediately transform back into `sub %x, -1`,
and here we go again...
I've marked this as NFC since not a single test changes,
but since that 'changes' DAGCombine, probably this isn't fully NFC.
Reviewers: RKSimon, craig.topper, spatel
Reviewed By: craig.topper
Subscribers: hiraditya, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D62327
llvm-svn: 370327
We had an isel pattern to perform this, but its better to
do it in DAG combine as a simplification. This also fixes the lack
of patterns for AVX512 targets.
llvm-svn: 370294
Including a type legalizer fix to make bitcast operand promotion
work correctly when getSoftenedFloat returns f128 instead of i128.
Fixes PR43157
llvm-svn: 370293
Neither libgcc or compiler-rt are usually used on Windows, so these
functions can't be called.
Differential revision: https://reviews.llvm.org/D66880
llvm-svn: 370204
Probably better to keep add over sub in early DAG combines.
It might make sense to push this to lowering or delay it all
the way to isel. But this was the simplest change.
llvm-svn: 369981
ANY_EXTEND_VECTOR_INREG isn't currently marked Legal which prevents SimplifyDemandedBits from turning SIGN/ZERO_EXTEND_VECTOR_INREG into it after op legalization. And even if we did make it Legal, combineExtInVec doesn't do shuffle combining on the VECTOR_INREG nodes until AVX1.
This patch adds a quick hack to combinePMULDQ to directly emit a vector shuffle corresponding to an ANY_EXTEND_VECTOR_INREG operation. This avoids both of those issues without creating any other regressions on our tests. The xop-ifma.ll change here also showed up when I tried to resurrect D56306 and seemed to be the only improvement that patch creates now. This is a more direct way to get the benefit.
Differential Revision: https://reviews.llvm.org/D66436
llvm-svn: 369942
Summary:
Concat_vectors is more canonical during early DAG combine. For example, its what's used by SelectionDAGBuilder when converting IR shuffles into SelectionDAG shuffles when element counts between inputs and mask don't match. We also have combines in DAGCombiner than can pull concat_vectors through a shuffle. See partitionShuffleOfConcats. So it seems like concat_vectors is a better operation to use here. I had to teach DAGCombiner's SimplifyVBinOp to also handle concat_vectors with undef. I haven't checked yet if we can remove the INSERT_SUBVECTOR version in there or not.
I didn't want to mess with the other caller of getShuffleHalfVectors that's used during shuffle lowering where insert_subvector probably is what we want to produce so I've enabled this via a boolean passed to the function.
Reviewers: spatel, RKSimon
Reviewed By: RKSimon
Subscribers: hiraditya, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D66504
llvm-svn: 369872
CONCAT_VECTORS and INSERT_SUBVECTORS can both call combineConcatVectorOps,
but we shouldn't produce INSERT_SUBVECTORS from there. We should
keep CONCAT_VECTORS until vector legalization.
Noticed while looking at the madd_quad_reduction test from madd.ll
llvm-svn: 369802
Patch showing the effect of enabling bool vector oversimplification.
Non-VLX builds can simplify a kshift shuffle, but VLX builds simplify:
insert_subvector v8i zeroinitializer, v2i --> insert_subvector v8i undef, v2i
Preventing the removal of the AND to clear the upper bits of result
Differential Revision: https://reviews.llvm.org/D53022
llvm-svn: 369780
For v2i32 we only feed 2 i8 elements into the psadbw instructions
with 0s in the other 14 bytes. The resulting psadbw instruction
will produce zeros in bits [127:16] of the output. We need to take
the result and feed it to a v2i32 add where the first element
includes bits [15:0] of the sad result. The other element should
be zero.
Prior to this patch we were using a truncate to take 0 from
bits 95:64 of the psadbw. This results in a pshufd to move those
bits to 63:32. But since we also have zeroes in bits 63:32 of
the psadbw output, we should just take those bits.
The previous code probably worked better with promoting legalization,
but now we use widening legalization. I've preserved the old
behavior if -x86-experimental-vector-widening-legalization=false
until we get that option removed.
llvm-svn: 369733
I also had to add a new combine to X86's combineExtractSubvector to prevent a regression.
This helps our vXi1 code see the full concat operation and allow it optimize undef to a zero if there is already a zero in the concat. This helped us use a movzx instead of an AND in some of the tests. In those tests, one concat comes from SelectionDAGBuilder and the second comes from type legalization of v4i1->i4 bitcasts which uses an additional concat. Though these changes weren't my original motivation.
I'm looking at making X86ISelLowering's narrowShuffle emit a concat_vectors instead of an insert_subvector since concat_vectors is more canonical during early DAG combine. This patch helps prevent a regression from my experiments with that.
Differential Revision: https://reviews.llvm.org/D66456
llvm-svn: 369459
Without AVX512DQ we don't have KMOVB so we can't really copy 8-bits of a k-register to a GPR. We have to copy 16 bits instead. We do this even if the DAG copy is from v8i1->v16i1. If we detect the (i8 (bitcast (v8i1 (extract_subvector (v16i1 X), 0)))) we should rewrite the types to match the copy we do support. By doing this, we can help known bits to propagate without losing the upper 8 bits of the input to the extract_subvector. This allows some zero extends to be removed since we have an isel pattern to use kmovw for (zero_extend (i16 (bitcast (v16i1 X))).
Differential Revision: https://reviews.llvm.org/D66489
llvm-svn: 369434
Google is reporting performance issues with the new default behavior
and have asked for a way to switch back to the old behavior while we
investigate and make fixes.
I've restored all of the code that had since been removed and added
additional checks of the command flag onto code paths that are
not otherwise guarded by a check of getTypeAction.
I've also modified the cost model tables to hopefully get us back
to the previous costs.
Hopefully we won't need to support this for very long since we
have no test coverage of the old behavior so we can very easily
break it.
llvm-svn: 369332
The motivating case are the changes in vector-reduce-add.ll where
we were doing extra work in the scalar domain instead of shuffling.
There may be some one use check that needs to be looked into there,
but this patch sidesteps the issue by avoiding broadcasts that
aren't really broadcasting.
Differential Revision: https://reviews.llvm.org/D66071
llvm-svn: 369287
We can support these by widening to a supported type,
then shifting all the way to the left and then
back to the right to ensure that we shift in zeroes.
llvm-svn: 369232
Not sure how to test this as we have tests that exercise this code,
but nothing failed for the types not matching. Since all the k-registers
use equivalent register classes everything just ends up working.
llvm-svn: 369228
This allows us to widen the type when the KSHIFTR instruction
doesn't exist for the type. If we need to shift in zeroes into
the upper elements we would need more work to guarantee zeroes
when widening.
llvm-svn: 369227
For such a case we should only need a KSHIFTL, but we were
previously generating a KSHIFTL followed by a KSHIFTR because
we mistakenly believed we need to zero the undef elements.
llvm-svn: 369224
Add similar functionality to isShuffleEquivalent - if the mask elements don't match, try matching the BUILD_VECTOR scalars instead.
As target shuffles need to handle SM_Sentinel values, this can get a bit tricky, so commit just adds actual mask element index handling - full SM_SentinelZero support will be added when the need arises.
Also, enables support in matchVectorShuffleWithPACK
llvm-svn: 369212
Simplifies shuffle mask comparisons by just bailing out if the shuffle mask has any out of range values - will make an upcoming patch much simpler.
llvm-svn: 369211
Eventually we need to generalize combineExtractWithShuffle to handle all faux shuffles and handle truncate (and X86ISD::VTRUNC etc.) there, but we're not ready yet (still creates nodes on the fly, incomplete DemandedElts support, bad use of recursive Depth limit).
llvm-svn: 369134
Summary:
This clang-tidy check is looking for unsigned integer variables whose initializer
starts with an implicit cast from llvm::Register and changes the type of the
variable to llvm::Register (dropping the llvm:: where possible).
Partial reverts in:
X86FrameLowering.cpp - Some functions return unsigned and arguably should be MCRegister
X86FixupLEAs.cpp - Some functions return unsigned and arguably should be MCRegister
X86FrameLowering.cpp - Some functions return unsigned and arguably should be MCRegister
HexagonBitSimplify.cpp - Function takes BitTracker::RegisterRef which appears to be unsigned&
MachineVerifier.cpp - Ambiguous operator==() given MCRegister and const Register
PPCFastISel.cpp - No Register::operator-=()
PeepholeOptimizer.cpp - TargetInstrInfo::optimizeLoadInstr() takes an unsigned&
MachineTraceMetrics.cpp - MachineTraceMetrics lacks a suitable constructor
Manual fixups in:
ARMFastISel.cpp - ARMEmitLoad() now takes a Register& instead of unsigned&
HexagonSplitDouble.cpp - Ternary operator was ambiguous between unsigned/Register
HexagonConstExtenders.cpp - Has a local class named Register, used llvm::Register instead of Register.
PPCFastISel.cpp - PPCEmitLoad() now takes a Register& instead of unsigned&
Depends on D65919
Reviewers: arsenm, bogner, craig.topper, RKSimon
Reviewed By: arsenm
Subscribers: RKSimon, craig.topper, lenary, aemerson, wuzish, jholewinski, MatzeB, qcolombet, dschuff, jyknight, dylanmckay, sdardis, nemanjai, jvesely, wdng, nhaehnle, sbc100, jgravelle-google, kristof.beyls, hiraditya, aheejin, kbarton, fedor.sergeev, javed.absar, asb, rbar, johnrusso, simoncook, apazos, sabuasal, niosHD, jrtc27, MaskRay, zzheng, edward-jones, atanasyan, rogfer01, MartinMosbeck, brucehoult, the_o, tpr, PkmX, jocewei, jsji, Petar.Avramovic, asbirlea, Jim, s.egerton, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D65962
llvm-svn: 369041
If the last step in an FP add reduction allows reassociation and doesn't care
about -0.0, then we are free to recognize that computation as a reduction
that may reorder the intermediate steps.
This is requested directly by PR42705:
https://bugs.llvm.org/show_bug.cgi?id=42705
and solves PR42947 (if horizontal math instructions are actually faster than
the alternative):
https://bugs.llvm.org/show_bug.cgi?id=42947
Differential Revision: https://reviews.llvm.org/D66236
llvm-svn: 368995
If the width is 256 bits, then we must have AVX so the else here
was unnecessary. Once that's removed then the >= 256 bit code is
identical to the 128 bit code with a different VT so combine them.
llvm-svn: 368956
If the target shuffle mask is from a wider type, attempt to scale the mask so that the extraction can attempt to peek through.
Fixes the regression mentioned in rL368662
Reapplying this as rL368308 had to be reverted as part of rL368660 to revert rL368276
llvm-svn: 368663
If we don't demand all elements, then attempt to combine to a simpler shuffle.
At the moment we can only do this if Depth == 0 as combineX86ShufflesRecursively uses Depth to track whether the shuffle has really changed or not - we'll need to change this before we can properly start merging combineX86ShufflesRecursively into SimplifyDemandedVectorElts.
The insertps-combine.ll regression is because XFormVExtractWithShuffleIntoLoad can't see through shuffles of different widths - this will be fixed in a follow-up commit.
Reapplying this as rL368307 had to be reverted as part of rL368660 to revert rL368276
llvm-svn: 368662
This introduced a false positive MemorySanitizer warning about use of
uninitialized memory in a vectorized crc function in Chromium. That suggests
maybe something is not right with this transformation. See
https://crbug.com/992853#c7 for a reproducer.
This also reverts the follow-up commits r368307 and r368308 which
depended on this.
> This patch attempts to peek through vectors based on the demanded bits/elt of a particular ISD::EXTRACT_VECTOR_ELT node, allowing us to avoid dependencies on ops that have no impact on the extract.
>
> In particular this helps remove some unnecessary scalar->vector->scalar patterns.
>
> The wasm shift patterns are annoying - @tlively has indicated that the wasm vector shift codegen are to be refactored in the near-term and isn't considered a major issue.
>
> Differential Revision: https://reviews.llvm.org/D65887
llvm-svn: 368660
We need AVX512BW to be able to truncate an i16 vector. If we don't
have that we have to extend i16->i32, then trunc, i32->i8. But we
won't be able to remove the min/max if we do that. At least not
without more special handling.
llvm-svn: 368623
If we're after type legalize, we should make sure we won't create
a store with an illegal type when we separate the AVG pattern
from the truncating store.
I don't know of a way to fail for this today. Just noticed while
I was in the vicinity.
llvm-svn: 368608
The test case that changed is probably better served through
allowing combineTruncatedArithmetic to create narrow vectors. It
also appears InstCombine would have simplified this test case
to remove the zext and trunc anyway.
llvm-svn: 368522
On SSE41+ targets we always lower vector shuffles to ZERO_EXTEND_VECTOR_INREG, even if we don't need the extended bits.
This patch relaxes this so that we lower to ANY_EXTEND_VECTOR_INREG if we can, meaning that shuffle combines have a better idea of what elements need to be kept zero. This helps the multiple reduction code as we can now combine away a lot more of the pack+extend codes.
Differential Revision: https://reviews.llvm.org/D65741
llvm-svn: 368515
Summary:
This patch adds a special DAG combine for SSE1 to recognize the IR pattern InstCombine gives us for movmsk. This only does the recognition for a few cases where its obvious the input won't be scalarized resulting in building a vector just do to the movmsk. I've made it separate from our existing matching for movmsk since that's called in multiple places and I didn't spend time to see if the other callers would make sense here. Plus the restrictions and additional checks would complicate that.
This fixes the case from PR42870. Buts its probably still broken the presence of logic ops feeding the movmsk pattern which would further hide the v4f32 type.
Reviewers: spatel, RKSimon, xbolva00
Subscribers: hiraditya, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D65689
llvm-svn: 368506
Summary:
On windows if the frame size exceed 4096 bytes, compiler need to
generate a call to _alloca_probe. X86CallFrameOptimization pass
changes the reserved stack size and cause of stack probe function
not be inserted. This patch fix the issue by detecting the call
frame size, if the size exceed 4096 bytes, drop X86CallFrameOptimization.
Reviewers: craig.topper, wxiao3, annita.zhang, rnk, RKSimon
Reviewed By: rnk
Subscribers: hiraditya, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D65923
llvm-svn: 368503
As discussed on PR42825, if we are inverting the selection mask we can just swap the inputs and avoid the inversion.
Differential Revision: https://reviews.llvm.org/D65522
llvm-svn: 368438
The only way to generate these was through promoting legalization
of narrow vectors, but we widen those types now. So we shouldn't
produce these nodes.
llvm-svn: 368396
Under this configuration we'll want to split the v8i64 or v16i32 into two vectors. The default legalization will try to truncate each of those 256-bit pieces one step to 128-bit, concatenate those, then truncate one more time from the new 256 to 128 bits.
With this patch we now truncate the two splits to 64-bits then concatenate those. We have to do this two different ways depending on whether have widening legalization enabled. Without widening legalization we have to manually construct X86ISD::VTRUNC to prevent the ISD::TRUNCATE with a narrow result being promoted to 128 bits with a larger element type than what we want followed by something like a pshufb to grab the lower half of each element to finish the job. With widening legalization we just get the right thing. When we switch to widening by default we can just delete the other code path.
Differential Revision: https://reviews.llvm.org/D65626
llvm-svn: 368349
If the target shuffle mask is from a wider type, attempt to scale the mask so that the extraction can attempt to peek through.
Fixes the regression mentioned in rL368307
llvm-svn: 368308
If we don't demand all elements, then attempt to combine to a simpler shuffle.
At the moment we can only do this if Depth == 0 as combineX86ShufflesRecursively uses Depth to track whether the shuffle has really changed or not - we'll need to change this before we can properly start merging combineX86ShufflesRecursively into SimplifyDemandedVectorElts.
The insertps-combine.ll regression is because XFormVExtractWithShuffleIntoLoad can't see through shuffles of different widths - this will be fixed in a follow-up commit.
llvm-svn: 368307
If we're splitting the 512-bit vector anyway and we have zero/sign bits, then we might as well use pack instructions to concat and truncate at once.
Differential Revision: https://reviews.llvm.org/D65904
llvm-svn: 368210
The assert that caused this to be reverted should be fixed now.
Original commit message:
This patch changes our defualt legalization behavior for 16, 32, and
64 bit vectors with i8/i16/i32/i64 scalar types from promotion to
widening. For example, v8i8 will now be widened to v16i8 instead of
promoted to v8i16. This keeps the elements widths the same and pads
with undef elements. We believe this is a better legalization strategy.
But it carries some issues due to the fragmented vector ISA. For
example, i8 shifts and multiplies get widened and then later have
to be promoted/split into vXi16 vectors.
This has the potential to cause regressions so we wanted to get
it in early in the 10.0 cycle so we have plenty of time to
address them.
Next steps will be to merge tests that explicitly test the command
line option. And then we can remove the option and its associated
code.
llvm-svn: 368183
If we're after type legalization we should only be trying to turn
v2i64 into v2i32. So bitcast to v4i32, shuffle the even elements
together. Then use X86ISD::CVTSI2P. The alternative is to leave
the v2i64 type alone and let it scalarized. Hopefully keeping
it packed is better.
Fixes PR42905.
llvm-svn: 368091
If we don't demand any non-undef shuffle elements then the assert will fail as all shuffle inputs would still be flagged as 'identity' safe.
Exposed by an incoming patch.
llvm-svn: 368022
Summary:
Before this patch MGATHER/MSCATTER is capable of representing all
common addressing modes, but only when illegal types are used.
This patch adds an IndexType property so more representations
are available when using legal types only.
Original modes:
vector of bases
base + vector of signed scaled offsets
New modes:
base + vector of signed unscaled offsets
base + vector of unsigned scaled offsets
base + vector of unsigned unscaled offsets
The current behaviour of addressing modes for gather/scatter remains
unchanged.
Patch by Paul Walker.
Reviewed By: craig.topper
Differential Revision: https://reviews.llvm.org/D65636
llvm-svn: 368008
This patch changes our defualt legalization behavior for 16, 32, and
64 bit vectors with i8/i16/i32/i64 scalar types from promotion to
widening. For example, v8i8 will now be widened to v16i8 instead of
promoted to v8i16. This keeps the elements widths the same and pads
with undef elements. We believe this is a better legalization strategy.
But it carries some issues due to the fragmented vector ISA. For
example, i8 shifts and multiplies get widened and then later have
to be promoted/split into vXi16 vectors.
This has the potential to cause regressions so we wanted to get
it in early in the 10.0 cycle so we have plenty of time to
address them.
Next steps will be to merge tests that explicitly test the command
line option. And then we can remove the option and its associated
code.
llvm-svn: 367901
The test case is based on the example from the post-commit thread for:
https://reviews.llvm.org/rGc9171bd0a955
This replaces the x86-specific simple-type check from:
rL367766
with a check in the DAGCombiner. Adding the check isn't
strictly necessary after the fix from:
rL367768
...but it seems likely that we're heading for trouble if
we are creating weird types in this transform.
I combined the earlier legality check into the initial
clause to simplify the code.
So we should only try the trunc/sext transform at the
earliest combine stage, but we limit the transform to
simple types anyway because the TLI hook is probably
too lax about what it considers a free truncate.
llvm-svn: 367834
Summary:
This is patch is part of a serie to introduce an Alignment type.
See this thread for context: http://lists.llvm.org/pipermail/llvm-dev/2019-July/133851.html
See this patch for the introduction of the type: https://reviews.llvm.org/D64790
Reviewers: courbet, jfb, jakehehrlich
Reviewed By: jfb
Subscribers: wuzish, jholewinski, arsenm, dschuff, nemanjai, jvesely, nhaehnle, javed.absar, sbc100, jgravelle-google, hiraditya, aheejin, kbarton, asb, rbar, johnrusso, simoncook, apazos, sabuasal, niosHD, jrtc27, MaskRay, zzheng, edward-jones, rogfer01, MartinMosbeck, brucehoult, the_o, dexonsmith, PkmX, jocewei, jsji, s.egerton, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D65514
llvm-svn: 367828
Summary:
The SimplifyDemandedVectorElts function can replace with undef
when no elements are demanded, but due to how it interacts with
TargetLoweringOpts, it can only do this when the node has
no other users.
Remove a now unneeded DAG combine from the X86 backend.
Reviewers: RKSimon, spatel
Reviewed By: RKSimon
Subscribers: hiraditya, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D65713
llvm-svn: 367788
This avoids the crash from:
https://bugs.llvm.org/show_bug.cgi?id=42880
...and I think it's a proper constraint for the TLI hook.
But that example raises questions about what happens to get us
into this situation (created i29 types) and what happens later
(why does legalization die on those types), so I'm not sure if
we will resolve the bug based on this change.
llvm-svn: 367766
This is consistent with the target independent intrinsic handling.
Not sure this really matters since we just pull the constant out
using getZExtValue later.
llvm-svn: 367736
If a type is larger than a legal type and needs to be split, we would previously allow the multiply to be decomposed even if the split multiply is legal. Since the shift + add/sub code would also need to be split, its not any better to decompose it.
This patch figures out what type the mul will eventually be legalized to and then uses that type for the query. I tried just returning false illegal types and letting them get handled after type legalization, but then we can't recognize and i64 constant splat on 32-bit targets since will be destroyed by type legalization. We could special case vectors of i64 to avoid that...
Differential Revision: https://reviews.llvm.org/D65533
llvm-svn: 367601
This adds SimplifyMultipleUseDemandedBitsForTargetNode X86 support and uses it to allow us to peek through vector insertions to avoid dependencies on entire insertion chains.
llvm-svn: 367570
We have custom code that ignores the normal promoting type legalization on less than 128-bit vector types like v4i8 to emit pavgb, paddusb, psubusb since we don't have the equivalent instruction on a larger element type like v4i32. If this operation appears before a store, we can be left with an any_extend_vector_inreg followed by a truncstore after type legalization. When truncstore isn't legal, this will normally be decomposed into shuffles and a non-truncating store. This will then combine away the any_extend_vector_inreg and shuffle leaving just the store. On avx512, truncstore is legal so we don't decompose it and we had no combines to fix it.
This patch adds a new DAG combine to detect this case and emit either an extract_store for 64-bit stoers or a extractelement+store for 32 and 16 bit stores. This makes the avx512 codegen match the avx2 codegen for these situations. I'm restricting to only when -x86-experimental-vector-widening-legalization is false. When we're widening we're not likely to create this any_extend_inreg+truncstore combination. This means we should be able to remove this code when we flip the default. I would like to flip the default soon, but I need to investigate some performance regressions its causing in our branch that I wasn't seeing on trunk.
Differential Revision: https://reviews.llvm.org/D65538
llvm-svn: 367488
Before combining insert_subvector(insert_subvector(vec, sub0, c0), sub1, c1) patterns, ensure that the subvectors are all the same type. On AVX512 targets especially we might have a mixture of 128/256 subvector insertions.
llvm-svn: 367429
PR42819 showed an issue that we couldn't handle the case where we demanded a 'sub-sub-vector' of the SUBV_BROADCAST 'sub-vector' source.
This patch recognizes these cases and extracts the sub-sub-vector instead of trying to broadcast to a type smaller than the 'sub-vector' source.
llvm-svn: 367306
As discussed on rL367171, we have a problem where the depth recursion used in combineX86ShufflesRecursively was subtly different to computeKnownBits etc. - it starts at Depth=1 instead of Depth=0 like the others and has a different maximum recursion depth.
This NFC patch fixes the recursion depth to start at 0, so we can more easily reuse depth values in calls from combineX86ShufflesRecursively and its helper functions in computeKnownBits etc.
llvm-svn: 367232
The pmaddwd inserts a truncate, if that truncate would end up
creating additional instructions instead of making a zext
narrower, then we shouldn't do it.
I've restricted this to only sse4.1 targets since on prior
targets the zext will be done in stages. So the truncate will
probably not create additional instructions. Might need some
more investigation of mul shrinking and the other pmaddwd
transform to be sure this is the right decision.
There might be a slight regression on AVX1 targets due to add
splitting. Hard to say for sure. Maybe we need to look into
using the vector reduction flag to use 2 narrow loads and a
blend instead of extracting and inserting.
llvm-svn: 367198
This reverts r340478 and r340631 and replaces them with a simpler
method of just letting DAG combine revisit the nodes to handle
the other operand.
llvm-svn: 367195
Recommit rL367100 which was reverted at rL367141. Until PR42777 is fixed, we no longer get the benefits of peeking through bitcasts but it does still remove a GetDemandedBits user and gives us the equivalent combines.
llvm-svn: 367172
Summary:
This was originally reported in D62818.
https://rise4fun.com/Alive/oPH
InstCombine does the opposite fold, in hope that `C l>>/<< Y` expression
will be hoisted out of a loop if `Y` is invariant and `X` is not.
But as it is seen from the diffs here, if it didn't get hoisted,
the produced assembly is almost universally worse.
Much like with my recent "hoist add/sub by/from const" patches,
we should get almost universal win if we hoist constant,
there is almost always an "and/test by imm" instruction,
but "shift of imm" not so much, so we may avoid having to
materialize the immediate, and thus need one less register.
And since we now shift not by constant, but by something else,
the live-range of that something else may reduce.
Special care needs to be applied not to disturb x86 `BT` / hexagon `tstbit`
instruction pattern. And to not get into endless combine loop.
Reviewers: RKSimon, efriedma, t.p.northover, craig.topper, spatel, arsenm
Reviewed By: spatel
Subscribers: hiraditya, MaskRay, wuzish, xbolva00, nikic, nemanjai, jvesely, wdng, nhaehnle, javed.absar, tpr, kristof.beyls, jsji, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D62871
llvm-svn: 366955
This patch adds support for recognizing cases where a larger vector type is being used to reduce just the elements in the lower subvector:
e.g. <8 x i32> reduction pattern in a <16 x i32> vector:
<4,5,6,7,u,u,u,u,u,u,u,u,u,u,u,u>
<2,3,u,u,u,u,u,u,u,u,u,u,u,u,u,u>
<1,u,u,u,u,u,u,u,u,u,u,u,u,u,u,u>
matchBinOpReduction returns the lower extracted subvector in such cases, assuming isExtractSubvectorCheap accepts the extraction.
I've only enabled it for X86 reduction sums so far. I intend to enable it for the bitop/minmax cases in future patches, and eventually I think its worth turning it on all the time. This is mainly just a case of ensuring calls to matchBinOpReduction don't make assumptions on the vector width based on the original vector extraction.
Fixes the x86 partial reduction sum cases in PR33758 and PR42023.
Differential Revision: https://reviews.llvm.org/D65047
llvm-svn: 366933
LegalizeDAG tries to legal the DAG by legalizing nodes before
their operands.
If we create a new node, we end up legalizing it after its operands.
This prevents some of the optimizations that can be done when the
operand is a build_vector since the build_vector will have been
legalized to something else.
Differential Revision: https://reviews.llvm.org/D65132
llvm-svn: 366835
The build_vector will become a constant pool load. By using the
desired type initially, it ensures we don't generate a bitcast
of the constant pool load which will need to be folded with
the load.
While experimenting with another patch, I noticed that when the
load type and the constant pool type don't match, then
SimplifyDemandedBits can't handle it. While we should probably
fix that, this was a simple way to fix the issue I saw.
llvm-svn: 366732
This patch enables us to find the source loads for each element, splitting them into a Load and ByteOffset, and attempts to recognise consecutive loads that are in fact from the same source load.
A helper function, findEltLoadSrc, recurses to find a LoadSDNode and determines the element's byte offset within it. When attempting to match consecutive loads, byte offsetted loads then attempt to matched against a previous load that has already been confirmed to be a consecutive match.
Next step towards PR16739 - after this we just need to account for shuffling/repeated elements to create a vector load + shuffle.
Fixed out of bounds load assert identified in rL366501
Differential Revision: https://reviews.llvm.org/D64551
llvm-svn: 366681
As detailed on PR42674, we can reduce a vXi8 down until we have the final <8 x i8>, and then use PSADBW with zero, to sum those values. We then extract the bottom i8, discarding any overflow from the upper bits of the i16 result.
llvm-svn: 366636
This patch enables us to find the source loads for each element, splitting them into a Load and ByteOffset, and attempts to recognise consecutive loads that are in fact from the same source load.
A helper function, findEltLoadSrc, recurses to find a LoadSDNode and determines the element's byte offset within it. When attempting to match consecutive loads, byte offsetted loads then attempt to matched against a previous load that has already been confirmed to be a consecutive match.
Next step towards PR16739 - after this we just need to account for shuffling/repeated elements to create a vector load + shuffle.
Differential Revision: https://reviews.llvm.org/D64551
llvm-svn: 366441
I'm not convinced the code this calls is properly vetted for
vXi1 vectors. Experimental vector widening legalization testing
for D55251 is now hitting an assertion failure inside
EltsFromConsecutiveLoads. This is occurring from a v2i1 load
having a store size different than its VT size. Hopefully
this commit will keep such issues from happening.
llvm-svn: 366405
This is part of what is requested by PR42023:
https://bugs.llvm.org/show_bug.cgi?id=42023
There's an extension needed for FP add, but exactly how we would specify
that using flags is not clear to me, so I left that as a TODO.
We're still missing patterns for partial reductions when the input vector
is 256-bit or 512-bit, but I think that's a failure of vector narrowing.
If we can reduce the widths, then this matching should work on those tests.
Differential Revision: https://reviews.llvm.org/D64760
llvm-svn: 366268
inttofp (trunc (extelt X, 0)) --> inttofp (extelt (bitcast X), 0)
We have pseudo-vectorization of scalar int to FP casts, so this tries to
make that more likely by replacing a truncate with a bitcast. I didn't see
any test diffs starting from 'uitofp', so I left that as a TODO. We can't
only match the shorter trunc+extract pattern because there's an opposing
transform somewhere, so we infinite loop. Waiting to try this during
lowering is another possibility.
A motivating case is shown in PR39975 and included in the test diffs here:
https://bugs.llvm.org/show_bug.cgi?id=39975
Differential Revision: https://reviews.llvm.org/D64710
llvm-svn: 366098
I think we only turn out of range shiftss to undef when
all elements are out of range or the shift amount is a splat out
of range. I'm not sure which, I didn't check.
During lowering we can split a shift where some elements
are out of range into multiple shifts. This can create a
new shift with a splat shift amount that is out of range.
This patch returns undef for this case.
Fixes PR42615.
Differential Revision: https://reviews.llvm.org/D64699
llvm-svn: 366096
Summary:
SSE1 only supports v4f32. But does have instructions like movlps/movhps that load/store 64-bits of memory.
This patch breaks the connection between the node VT of the vzext_load/vextract_store patterns and the memory VT. Enabling a v4f32 node with a 64-bit memory VT. I've used i64 as the memory VT here. I've written the PatFrag predicate to just check the store size not the specific VT. I think the VT will only matter for CSE purposes. We could use v2f32, but if we want to start using these operations in more places a simple integer type might make the most sense.
I'd like to maybe use this same thing for SSE2 and later as well, but that will need more work to be supported by EltsFromConsecutiveLoads to avoid regressing lit tests. I'd maybe also like to combine bitcasts with these load/stores nodes now that the types are disconnected. And I'd also like to consider canonicalizing (scalar_to_vector + load) to vzext_load.
If you want I can split the mechanical tablegen stuff where I added the 32/64 off from the sse1 change.
Reviewers: spatel, RKSimon
Reviewed By: RKSimon
Subscribers: hiraditya, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D64528
llvm-svn: 366034
Follow up to D58597, where it was noted that the commuted ISD::SUB variant
was having problems with lack of combines.
See also D63958 where we untangled setcc/sub pairs.
Differential Revision: https://reviews.llvm.org/D58875
llvm-svn: 365791
This renames the type so it doesn't sound like its based off the load size - as we're moving towards supporting combining loads of different sizes.
llvm-svn: 365655
Cache the LoadSDNode nodes so we can easily map to/from the element index instead of packing them together - this will be useful for future patches for PR16739 etc.
llvm-svn: 365620
This patch checks to see if the vector element loads are based off a dereferenceable pointer that covers the entire vector width, in which case we don't need to have element loads at both extremes of the vector width - just the start (base pointer) of it.
Another step towards partial vector loads......
Differential Revision: https://reviews.llvm.org/D64205
llvm-svn: 365614
This should prevent doing this on pre-sse4.1 targets or for 256
bit vectors without avx2.
I don't know of a failure from this. Op legalization will probably
take care of, but seemed better to be safe.
llvm-svn: 365577
Basically the problem is that X86 doesn't set the Fast flag from
allowsMemoryAccess on certain CPUs due to slow unaligned memory
subtarget features. This prevents bitcasts from being folded into
loads and stores. But all vector loads and stores of the same width
are the same cost on X86.
This patch merges the allowsMemoryAccess call into isLoadBitCastBeneficial to allow X86 to skip it.
Differential Revision: https://reviews.llvm.org/D64295
llvm-svn: 365549
Summary:
This makes it so that IR files using triples without an environment work
out of the box, without normalizing them.
Typically, the MSVC behavior is more desirable. For example, it tends to
enable things like constant merging, use of associative comdats, etc.
Addresses PR42491
Reviewers: compnerd
Subscribers: hiraditya, dexonsmith, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D64109
llvm-svn: 365387
Bitcast v4i32 to v8f32 and back again - it might be worth adding isel patterns for X86PShufd v8i32 on AVX1 targets like we did for X86Blendi to avoid the bitcasts?
llvm-svn: 365125
If we have more then 2 shuffle ops to combine, try to use combineX86ShuffleChainWithExtract to see if some are from the same super vector.
llvm-svn: 365050
iff the number of elements doesn't change.
This gets around an issue with combineX86ShuffleChain not being able to hint which domain is preferred for shuffles that can be done with either.
Fixes regression introduced in rL365041
llvm-svn: 365044
This better accounts for the cost/benefit of removing extract_subvectors from the shuffle and will be more useful in future patches.
The vpermq predicate regression will be fixed shortly.
llvm-svn: 365041
Assert that the shift amount is in range and create vXi8 shift masks in a way that doesn't cause MSVC/cppcheck shift result is truncated then extended warnings.
llvm-svn: 365024
Don't use APInt::getZExtValue() if you can avoid it - eventually someone will call it with i128 or something that doesn't fit into 64-bits.
In this case it was completely superfluous as we'd moved the rest of the code to always use APInt.
Fixes the <1 x i128> addition bug in PR42486
llvm-svn: 364953
Pull out CombineShuffleWithExtract lambda to new combineX86ShuffleChainWithExtract wrapper and refactored it to handle more than 2 shuffle inputs - this will allow combineX86ShufflesRecursively to call this in a future patch.
llvm-svn: 364924
We were relying on combineX86ShufflesRecursively to handle this - this patch gets it done earlier which should make it easier for other code to use resolveTargetShuffleInputsAndMask.
llvm-svn: 364906
These instructions only read 64-bits of memory so we shouldn't
allow a full vector width load to be pattern matched in case it
is marked volatile.
Instead allow vzload or scalar_to_vector+load.
Also add a DAG combine to turn full vector loads into vzload when
used by one of these instructions if the load isn't volatile.
This fixes another case for PR42079
llvm-svn: 364838
We can already widenSubVector to a specific type (of the same scalar type) - this variant just specifies the target vector size.
This will be useful when CombineShuffleWithExtract relaxes the need to have the same scalar type for all shuffle operand subvector sources.
llvm-svn: 364803
But only when the load isn't volatile.
This improves load folding during isel where we only have vzload
and scalar_to_vector+load patterns. We can't have full vector load
isel patterns for the same volatile load issue.
Also add some missing masked cvtsi2fp/cvtui2fp with vzload patterns.
llvm-svn: 364728
AVX masked loads only support 0 as the value for masked off elements.
So we need an extra blend to support other values. Previously we
expanded the masked load to two instructions with isel patterns.
With this patch we now insert the vselect during lowering and it
will be separately selected as a blend.
llvm-svn: 364718
We were requiring that both shuffle operands were EXTRACT_SUBVECTORs, but we can relax this to only require one of them to be.
Also, we shouldn't bother attempting this if both operands are from the lowest subvector (or not EXTRACT_SUBVECTOR at all).
llvm-svn: 364644
We already had the infrastructure for this, but were waiting for the fix for a number of regressions which were handled by the recent shuffle(extract_subvector(),extract_subvector()) -> extract_subvector(shuffle()) shuffle combines
llvm-svn: 364569
While lowering calls, collect info about registers that forward arguments
into following function frame. We store such info into the MachineFunction
of the call. This is used very late when dumping DWARF info about
call site parameters.
([9/13] Introduce the debug entry values.)
Co-authored-by: Ananth Sowda <asowda@cisco.com>
Co-authored-by: Nikola Prica <nikola.prica@rt-rk.com>
Co-authored-by: Ivan Baev <ibaev@cisco.com>
Differential Revision: https://reviews.llvm.org/D60715
llvm-svn: 364516
Without the fix gcc 7.4.0 complains with
../lib/Target/X86/X86ISelLowering.cpp: In function 'bool getFauxShuffleMask(llvm::SDValue, llvm::SmallVectorImpl<int>&, llvm::SmallVectorImpl<llvm::SDValue>&, llvm::SelectionDAG&)':
../lib/Target/X86/X86ISelLowering.cpp:6690:36: error: enumeral and non-enumeral type in conditional expression [-Werror=extra]
int Idx = (ZeroMask[j] ? SM_SentinelZero : (i + j + Ofs));
~~~~~~~~~~~~^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
cc1plus: all warnings being treated as errors
llvm-svn: 364507
This patch rewrites the loop iteration to only visit every other element starting with element 0. And we work on the "even" element and "next" element at the same time. The "First" logic has been moved to the bottom of the loop and doesn't run on every element. I believe it could create dangling nodes previously since we didn't check if we were going to use SCALAR_TO_VECTOR for the first insertion. I got rid of the "First" variable and just do a null check on V which should be equivalent. We also no longer use undef as the starting V for vectors with no zeroes to avoid false dependencies. This matches v8i16.
I've changed all the extends and OR operations to use MVT::i32 since that's what they'll be promoted to anyway. I've tried to use zero_extend only when necessary and use any_extend otherwise. This resulted in some improvements in tests where we are now able to promote aligned (i32 (extload i8)) to a 32-bit load.
Differential Revision: https://reviews.llvm.org/D63702
llvm-svn: 364469
This was trying to optimize concat_vectors with zero of setcc or
kand instructions. But I think it produced the same code we
produce for a concat_vectors with 0 even it it doesn't come from
one of those operations.
llvm-svn: 364463
Create a per-byte shuffle mask based on the computeKnownBits from each operand - if for each byte we have a known zero (or both) then it can be safely blended.
Fixes PR41545
llvm-svn: 364458
We have (almost) no target opcodes that have scalar/vector equivalents - for now assume we can't scalarize them (we can add exceptions if we need to).
llvm-svn: 364429
Ideally this needs to be a generic combine in DAGCombiner::visitEXTRACT_SUBVECTOR but there's some nasty regressions in aarch64 due to neon shuffles not handling bitcasts at all.....
llvm-svn: 364407
truncateVectorWithPACK is often used in conjunction with ComputeNumSignBits which struggles when peeking through bitcasts.
This fix tries to avoid bitcast(shuffle(bitcast())) patterns in the 256-bit 64-bit sublane shuffles so we can still see through at least until lowering when the shuffles will need to be bitcasted to widen the shuffle type.
llvm-svn: 364401
We currently have some isel patterns for treating vzmovl+load the same as vzload, but that shrinks the load which we shouldn't do if the load is volatile.
Rather than adding isel checks for volatile. This patch removes the patterns and teachs DAG combine to merge them into vzload when its legal to do so.
Differential Revision: https://reviews.llvm.org/D63665
llvm-svn: 364333
In LowerBuildVectorv16i8 we took care to use an any_extend if the first pair is in the lower 16-bits of the vector and no elements are 0. So bits [31:16] will be undefined. But we still emitted a vzext_movl to ensure that bits [127:32] are 0. If we don't need any zeroes we should be consistent and make all of 127:16 undefined.
In LowerBuildVectorv8i16 we can just delete the vzext_movl code because we only use the scalar_to_vector when there are no zeroes. So the vzext_movl is always unnecessary.
Found while investigating whether (vzext_movl (scalar_to_vector (loadi32)) patterns are necessary. At least one of the cases where they were necessary was where the loadi32 matched 32-bit aligned 16-bit extload. Seemed weird that we required vzext_movl for that case.
Differential Revision: https://reviews.llvm.org/D63700
llvm-svn: 364207
This patch does a few things to start cleaning up the isFNEG function.
-Remove the Op0/Op1 peekThroughBitcast calls that seem unnecessary. getTargetConstantBitsFromNode has its own peekThroughBitcast inside. And we have a separate peekThroughBitcast on the return value.
-Add a check of the scalar size after the first peekThroughBitcast to ensure we haven't changed the element size and just did something like f32->i32 or f64->i64.
-Remove an unnecessary check that Op1's type is floating point after the peekThroughBitcast. We're just going to look for a bit pattern from a constant. We don't care about its type.
-Add VT checks on several places that consume the return value of isFNEG. Due to the peekThroughBitcasts inside, the type of the return value isn't guaranteed. So its not safe to use it to build other nodes without ensuring the type matches the type being used to build the node. We might be able to replace these checks with bitcasts instead, but I don't have a test case so a bail out check seemed better for now.
Differential Revision: https://reviews.llvm.org/D63683
llvm-svn: 364206
Ideally we'd be able to represent this truncate as a any_extend to
v16i32 and a truncate, but SelectionDAG doens't know how to not
fold those together.
We have isel patterns to use a vpmovzxwd+vpdmovdb for the truncate,
but we aren't able to simultaneously fold the load and the store
from the isel pattern. By pulling the truncate into the store we
can successfully hide it from the DAG combiner. Then we can isel
pattern match the truncstore and load+any_extend separately.
llvm-svn: 364163
128/256 bit scalar_to_vectors are canonicalized to (insert_subvector undef, (scalar_to_vector), 0). We have isel patterns that try to match this pattern being used by a vzmovl to use a 128-bit instruction and a subreg_to_reg.
This patch detects the insert_subvector undef portion of this and pulls it through the vzmovl, creating a narrower vzmovl and an insert_subvector allzeroes. We can then match the insertsubvector into a subreg_to_reg operation by itself. Then we can fall back on existing (vzmovl (scalar_to_vector)) patterns.
Note, while the scalar_to_vector case is the motivating case I didn't restrict to just that case. I'm also wondering about shrinking any 256/512 vzmovl to an extract_subvector+vzmovl+insert_subvector(allzeros) but I fear that would have bad implications to shuffle combining.
I also think there is more canonicalization we can do with vzmovl with loads or scalar_to_vector with loads to create vzload.
Differential Revision: https://reviews.llvm.org/D63512
llvm-svn: 364095
This should be unreachable, but bugs can make it reachable. This
adds a debug print so we can see the bad node in the output when
the llvm_unreachable triggers.
llvm-svn: 364091
The sat add/sub tests still have unnecessary extract_subvector((vandnps ymm, ymm), 0) uses that should be split to (vandnps (extract_subvector(ymm, 0), extract_subvector(ymm, 0)), but its getting better.
llvm-svn: 364038
This is an exception to the rule that we should prefer xmm ops to ymm ops.
As shown in PR42305:
https://bugs.llvm.org/show_bug.cgi?id=42305
...the store folding opportunity with vextractf128 may result in better
perf by reducing the instruction count.
Differential Revision: https://reviews.llvm.org/D63517
llvm-svn: 363853
We already do this for ZERO_EXTEND/ZERO_EXTEND_VECTOR_INREG - this just extends the pattern matcher to recognize cases where we don't need the zeros in the extension.
llvm-svn: 363841
This allows targets to make more decisions about reserved registers
after isel. For example, now it should be certain there are calls or
stack objects in the frame or not, which could have been introduced by
legalization.
Patch by Matthias Braun
llvm-svn: 363757
FP_ROUND defaults to Legal for all MVT types and nothing changes
the v4f32 entry way from this default. If we needed this line
we'd also need one for v8f32 with AVX512 which we don't have.
llvm-svn: 363719
Part of fixing the X86 regression noted in D63281 - I've split this into X86 and generic parts - the generic commit will be coming shortly and will fix the vector-reduce-mul-widen.ll regression introduced here.
llvm-svn: 363693
If a XMM non-temporal store has less than natural alignment, scalarize the vector - with SSE4A we can stay on the vector and use MOVNTSD(f64), else we must move to GPRs and use MOVNTI(i32/i64).
llvm-svn: 363592
If a YMM/ZMM non-temporal store has less than natural alignment, split the vector - either they will be satisfactorily aligned or will continue to be split until they are XMMs - at which point the legalizer will scalarize it.
llvm-svn: 363582
This is currently only used for ymm->xmm splitting but we shouldn't hardcode the offsets/alignment.
This is necessary for an upcoming patch to split under-aligned non-temporal vector loads.
llvm-svn: 363570
For loads, pre-SSE41 we can't perform NT loads at all, and after that we can only perform vector aligned loads, so if the alignment is less than for a xmm we'll just end up using the regular unaligned vector loads anyway.
First step towards fixing PR42026 - the next step for stores will be to use SSE4A movntsd where possible and to avoid the stack spill on SSE2 targets.
Differential Revision: https://reviews.llvm.org/D63246
llvm-svn: 363564
This is similar logic/motivation to the select splitting in D62969.
In D63233, the pattern changes so that we no longer have an extract_subvector of vselect,
but the operands of the select are still being concatenated.
The closest case is represented in either the first or last test diffs here - we have an
extra instruction, but we converted 3-4 ymm instructions into 4-5 xmm instructions.
I think that's the right trade-off for most AVX1 targets.
In the example based on PR37428:
https://bugs.llvm.org/show_bug.cgi?id=37428
...this makes the loop about 30% faster (tested on Haswell by compiling with -mavx).
Differential Revision: https://reviews.llvm.org/D63364
llvm-svn: 363508
Previously it copied over MachineMemOperands verbatim which caused MOV32rm to have store flags set, and MOV32mr to have load flags set. This fixes some assertions being thrown with EXPENSIVE_CHECKS on.
Committed on behalf of @luke (Luke Lau)
Differential Revision: https://reviews.llvm.org/D62726
llvm-svn: 363268
As discussed on D62910, we need to check whether particular types of memory access are allowed, not just their alignment/address-space.
This NFC patch adds a MachineMemOperand::Flags argument to allowsMemoryAccess and allowsMisalignedMemoryAccesses, and wires up calls to pass the relevant flags to them.
If people are happy with this approach I can then update X86TargetLowering::allowsMisalignedMemoryAccesses to handle misaligned NT load/stores.
Differential Revision: https://reviews.llvm.org/D63075
llvm-svn: 363179
As suggested by @arsenm on D63075 - this adds a TargetLowering::allowsMemoryAccess wrapper that takes a Load/Store node's MachineMemOperand to handle the AddressSpace/Alignment arguments and will also implicitly handle the MachineMemOperand::Flags change in D63075.
llvm-svn: 363048
Summary:
Our default behavior is to use sign_extend for signed comparisons and zero_extend for everything else. But for equality we have the freedom to use either extension. If we can prove the input has been truncated from something with enough sign bits, we can use sign_extend instead and let DAG combine optimize it out. A similar rule is used by type legalization in LegalizeIntegerTypes.
This gets rid of the movzx in PR42189. The immediate will still take 4 bytes instead of the 2 bytes plus 0x66 prefix a cmp di, 32767 would get, but it avoids a length changing prefix.
Reviewers: RKSimon, spatel, xbolva00
Reviewed By: xbolva00
Subscribers: hiraditya, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D63032
llvm-svn: 362920
Summary:
We can only use the memory form of cvtss2sd under optsize due to a partial register update. So previously we were emitting 2 instructions for extload when optimizing for speed. Also due to a late optimization in preprocessiseldag we had to handle (fpextend (loadf32)) under optsize.
This patch forces extload to expand so that it will always be in the (fpextend (loadf32)) form during isel. And when optimizing for speed we can just let each of those pieces select an instruction independently.
Reviewers: spatel, RKSimon
Reviewed By: RKSimon
Subscribers: hiraditya, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D62710
llvm-svn: 362919
This is a potentially large perf win for AVX1 targets because of the way we
auto-vectorize to 256-bit but then expect the backend to legalize/optimize
for the half-implemented AVX1 ISA.
On the motivating example from PR37428 (even though this patch doesn't solve
the vector shift issue):
https://bugs.llvm.org/show_bug.cgi?id=37428
...there's a 16% speedup when compiling with "-mavx" (perf tested on Haswell)
because we eliminate the remaining 256-bit vblendv ops.
I added comments on a couple of tests that require further work. If we have
256-bit logic ops separating the vselect and extract, we should probably narrow
everything to 128-bit, but that requires a larger pattern match.
Differential Revision: https://reviews.llvm.org/D62969
llvm-svn: 362797
This is intended to enable the use of an immediate blend or
more optimal instruction. But if the passthru is zero we don't
need any additional instructions.
llvm-svn: 362675
As suggested in D62498 - collectConcatOps() matches both
concat_vectors and insert_subvector patterns, and we see
more test improvements by using the more general match.
llvm-svn: 362620
We already handle the case where we combine shuffle(extractsubvector(x),extractsubvector(x)), this relaxes the requirement to permit different sources as long as they have the same value type.
This causes a couple of cases where the VPERMV3 binary shuffles occur at a wider width than before, which I intend to improve in future commits - but as only the subvector's mask indices are defined, these will broadcast so we don't see any increase in constant size.
llvm-svn: 362599
-Use early returns to reduce indentation
-Replace multipe ifs with a switch.
-Replace an assert with an llvm_unreachable default in the switch.
-Check that the FP type we're going to use for the
X86ISD::FAND/FOR/FXOR is legal rather than checking that the
integer type matches the width of a legal scalar fp type. This all
runs after legalization so it shouldn't really matter, but making
sure we're using a valid type in the X86ISD node is really
whats important.
llvm-svn: 362565
This shows up as a side issue to the main problem for the AVX target example from PR37428:
https://bugs.llvm.org/show_bug.cgi?id=37428 - https://godbolt.org/z/7tpRa3
But as we can see in the pile of existing test diffs, it's actually a widespread problem
that affects any AVX or later target. Apart from a couple of oddballs, I think these are
all improvements for the reasons stated in the code comment: we do not want to enable YMM
unnecessarily (avoid vzeroupper and frequency throttling) and some cores split 256-bit
stores anyway.
We could say that MergeConsecutiveStores() is going overboard on some of these examples,
but that won't solve the problem completely. But that is a reason I'm proposing this as
a lowering rather than a combine: we will infinite loop fighting the merge code if we try
this earlier.
Differential Revision: https://reviews.llvm.org/D62498
llvm-svn: 362524
As discussed on D62777 - we should be able to use this in more SSE41+ cases as well but that requires us to separate it from the OR(AND(),ANDN()) matcher.
llvm-svn: 362504
Move this combine from x86 into generic DAGCombine, which currently only manages cases where the bitcast is between types of the same scalarsize.
Differential Revision: https://reviews.llvm.org/D59188
llvm-svn: 362324
The LoadExt table defaults to all combinations being Legal. For
vector types, only src VTs with an i1 element type were ever changed.
So we don't need to mark them legal manually.
llvm-svn: 362170
We already have good codegen for (vXiY *ext(vXi1 bitcast(iX))) cases, this patch uses it for loads of vXi1 types as well - changing the load into a iX integer load, and bitcasting so that combineToExtendBoolVectorInReg can then use it.
Differential Revision: https://reviews.llvm.org/D62449
llvm-svn: 362081
This patch add the ISD::LRINT and ISD::LLRINT along with new
intrinsics. The changes are straightforward as for other
floating-point rounding functions, with just some adjustments
required to handle the return value being an interger.
The idea is to optimize lrint/llrint generation for AArch64
in a subsequent patch. Current semantic is just route it to libm
symbol.
Reviewed By: craig.topper
Differential Revision: https://reviews.llvm.org/D62017
llvm-svn: 361875
This shows up as a side issue to the main problem for the AVX target example from PR37428:
https://bugs.llvm.org/show_bug.cgi?id=37428 - https://godbolt.org/z/7tpRa3
But as we can see in the pile of existing test diffs, it's actually a widespread problem
that affects any AVX or later target. Apart from a couple of oddballs, I think these are
all improvements for the reasons stated in the code comment: we do not want to enable YMM
unnecessarily (avoid vzeroupper and frequency throttling) and some cores split 256-bit
stores anyway.
We could say that MergeConsecutiveStores() is going overboard on some of these examples,
but that won't solve the problem completely. But that is the reason I'm proposing this as
a lowering rather than a combine: we will infinite loop fighting the merge code if we try
this earlier.
Differential Revision: https://reviews.llvm.org/D62498
llvm-svn: 361822
Forking this out of the discussion in D62498
(and assuming that will be committed later, so adding the helper function here).
The LangRef says:
"the backend should never split or merge target-legal volatile load/store instructions."
Differential Revision: https://reviews.llvm.org/D62506
llvm-svn: 361815
We were only testing for direct SETCC results - this allows us to peek through AND/OR/XOR combinations of the comparison results as well.
There's a missing SEXT(PACKSS) fold that I need to investigate for v8i1 cases before I can enable it there as well.
llvm-svn: 361716
If we have a known non-nan operand, place it in the second operand
of fmin/fmax that is returned if either operand is nan.
Differential Revision: https://reviews.llvm.org/D62448
llvm-svn: 361704
This patch adds the overridable TargetLowering::getTargetConstantFromLoad function which allows targets to return any constant value loaded by a LoadSDNode node - only X86 makes use of this so far but everything should be in place for other targets.
computeKnownBits then uses this function to improve codegen, notably vector code after legalization.
A future commit will do the same for ComputeNumSignBits but computeKnownBits sees the bigger benefit.
This required a couple of fixes:
* SimplifyDemandedBits must early-out for getTargetConstantFromLoad cases to prevent infinite loops of constant regeneration (similar to what we already do for BUILD_VECTOR).
* Fix a DAGCombiner::visitTRUNCATE issue as we had trunc(shl(v8i32),v8i16) <-> shl(trunc(v8i16),v8i32) infinite loops after legalization on AVX512 targets.
Differential Revision: https://reviews.llvm.org/D61887
llvm-svn: 361620
Fix for https://bugs.llvm.org/show_bug.cgi?id=41971. Make the
combineVectorSizedSetCCEquality() transform more conservative by
checking that the bitcast to the vector type will be cheap/free
for both operands. I'm considering it cheap if it's a constant,
a load or already a vector. I've dropped the explicit check for
f128 because it should fall out naturally (in the cases where
it'd be detrimental).
Differential Revision: https://reviews.llvm.org/D62220
llvm-svn: 361352
Same as what we do for vector reductions in combineHorizontalPredicateResult, use movmsk+cmp for scalar (and(extract(x,0),extract(x,1)) reduction patterns.
llvm-svn: 361052
Summary:
This refactors four pieces of code that create SDNodes for references to
symbols:
- normal global address lowering (LEA, MOV, etc)
- callee global address lowering (CALL)
- external symbol address lowering (LEA, MOV, etc)
- external symbol address lowering (CALL)
Each of these pieces of code need to:
- classify the reference
- lower the symbol
- emit a RIP wrapper if needed
- emit a load if needed
- add offsets if needed
I think handling them all in one place will make the code easier to
maintain in the future.
Reviewers: craig.topper, RKSimon
Subscribers: hiraditya, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D61690
llvm-svn: 360952
This patch add the ISD::LROUND and ISD::LLROUND along with new
intrinsics. The changes are straightforward as for other
floating-point rounding functions, with just some adjustments
required to handle the return value being an interger.
The idea is to optimize lround/llround generation for AArch64
in a subsequent patch. Current semantic is just route it to libm
symbol.
llvm-svn: 360889
They encode the same way, but OR32mi8Locked sets hasUnmodeledSideEffects set
which should be stronger than the mayLoad/mayStore on LOCK_OR32mi8. I think
this makes sense since we are using it as a fence.
This also seems to hide the operation from the speculative load hardening pass
so I've reverted r360511.
llvm-svn: 360747
This was the portion split off D58632 so that it could follow the redzone API cleanup. Note that I changed the offset preferred from -8 to -64. The difference should be very minor, but I thought it might help address one concern which had been previously raised.
Differential Revision: https://reviews.llvm.org/D61862
llvm-svn: 360719
D61068 handled vector shifts, this patch does the same for scalars where there are similar number of pipes for shifts as bit ops - this is true almost entirely for AMD targets where the scalar ALUs are well balanced.
This combine avoids AND immediate mask which usually means we reduce encoding size.
Some tests show use of (slow, scaled) LEA instead of SHL in some cases, but thats due to particular shift immediates - shift+mask generate these just as easily.
Differential Revision: https://reviews.llvm.org/D61830
llvm-svn: 360684
This is a follow on to D58632, with the same logic. Given a memory operation which needs ordering, but doesn't need to modify any particular address, prefer to use a locked stack op over an mfence.
Differential Revision: https://reviews.llvm.org/D61863
llvm-svn: 360649
Returning SDValue() makes the caller think that nothing happened and it will
end up executing the Expand path. This generates extra nodes that will need to
be pruned as dead code.
Returning an ISD::MERGE_VALUES will tell the caller that we'd like to make a
change and it will take care of replacing uses. This will prevent falling into
the Expand path.
llvm-svn: 360627
These are updates to match how isel table would emit a LOCK_OR32mi8 node.
-Use i32 for the immediate zero even though only 8 bits are encoded.
-Use i16 for segment register.
-Use LOCK_OR32mi8 for idempotent atomic operations in 32-bit mode to match
64-bit mode. I'm not sure why OR32mi8Locked and LOCK_OR32mi8 both exist. The
only difference seems to be that OR32mi8Locked is marked as UnmodeledSideEffects=1.
-Emit an extra i32 result for the flags output.
I don't know if the types here really matter just noticed it was inconsistent
with normal behavior.
llvm-svn: 360619
Summary:
X86TargetLowering::LowerAsmOperandForConstraint had better support than
TargetLowering::LowerAsmOperandForConstraint for arbitrary depth
getelementpointers for "i", "n", and "s" extended inline assembly
constraints. Hoist its support from the derived class into the base
class.
Link: https://github.com/ClangBuiltLinux/linux/issues/469
Reviewers: echristo, t.p.northover
Reviewed By: t.p.northover
Subscribers: t.p.northover, E5ten, kees, jyknight, nemanjai, javed.absar, eraman, hiraditya, jsji, llvm-commits, void, craig.topper, nathanchance, srhines
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D61560
llvm-svn: 360604
Fixes the regression noted in D61782 where a VZEXT_MOVL was being inserted because we weren't discriminating between 'zeroable' and 'all undef' for the upper elts.
Differential Revision: https://reviews.llvm.org/D61782
llvm-svn: 360596
Now that we can use HADD/SUB for scalar additions from any pair of extracted elements (D61263), we can relax the one use limit as we will be able to merge multiple uses into using the same HADD/SUB op.
This exposes a couple of missed opportunities in LowerBuildVectorv4x32 which will be committed separately.
Differential Revision: https://reviews.llvm.org/D61782
llvm-svn: 360594
See if we can simplify the demanded vector elts from the extraction before trying to simplify the demanded bits.
This helps us with target shuffles and hops in particular.
llvm-svn: 360535
If we only use the lower xmm of a ymm hop, then extract the xmm's (for free), perform the xmm hop and then insert back into a ymm (for free).
Fixes some of the regressions noted in D61782
llvm-svn: 360435
The current lowering uses an mfence. mfences are substaintially higher latency than the locked operations originally requested, but we do want to avoid contention on the original cache line. As such, use a locked instruction on a cache line assumed to be thread local.
Differential Revision: https://reviews.llvm.org/D58632
llvm-svn: 360393
As reported on PR39920, "slow horizontal ops" targets tend to internally expand to 2*shuffle+add/sub - so if we can reduce 2*shuffle+add/sub to a hadd/sub then we should do it - similar port usage but reduced instruction count.
This works out in most cases, although the "PR22377" regression in vector-shuffle-combining.ll is annoying - going from 2*shuffle+add+shuffle to hadd+2*shuffle - I've opened PR41813 to cover this.
Differential Revision: https://reviews.llvm.org/D61308
llvm-svn: 360360
Summary:
A COFF stub indirects the reference to a symbol through memory. A
.refptr.$sym global variable pointer is created to refer to $sym.
Typically mingw uses these for external global variable declarations,
but we can use them for weak function declarations as well.
Updates the dso_local classification to add a special case for
extern_weak symbols on COFF in both clang and LLVM.
Fixes PR37598
Reviewers: smeenai, mstorsjo
Subscribers: hiraditya, cfe-commits, llvm-commits
Tags: #clang, #llvm
Differential Revision: https://reviews.llvm.org/D61615
llvm-svn: 360207
Basic "revectorization" combine, we can probably do more opcodes here but it can be a tricky cost-benefit depending on where the subvectors came from - but this case helps shuffle combining.
llvm-svn: 360134
The FR32/FR64/VR128/VR256 register classes don't contain the upper 16 registers. For most cases we use the default implementation which will find any register class that contains the register in question if the VT is legal for the register class. But if the VT is i32 or i64, we won't find a matching register class and will instead up in the code modified in this patch.
If the requested register is x/y/zmm16-31 we weren't returning a register class that contains those registers and will hit an assertion in the caller.
To fix this, I've changed to use the extended register class instead. I don't believe we need a subtarget check to see if avx512 is enabled. The default implementation just pick whatever register class it finds first. I checked and we currently pick FR32X for XMM0 with an f32 type using the default implementation regardless of whether avx512 is enabled. So I assume its it is ok to do the same for i32.
Differential Revision: https://reviews.llvm.org/D61457
llvm-svn: 360102
Summary:
1. Enable infrastructure of AVX512_BF16, which is supported for BFLOAT16 in Cooper Lake;
2. Enable VCVTNE2PS2BF16, VCVTNEPS2BF16 and DPBF16PS instructions, which are Vector Neural Network Instructions supporting BFLOAT16 inputs and conversion instructions from IEEE single precision.
VCVTNE2PS2BF16: Convert Two Packed Single Data to One Packed BF16 Data.
VCVTNEPS2BF16: Convert Packed Single Data to Packed BF16 Data.
VDPBF16PS: Dot Product of BF16 Pairs Accumulated into Packed Single Precision.
For more details about BF16 isa, please refer to the latest ISE document: https://software.intel.com/en-us/download/intel-architecture-instruction-set-extensions-programming-reference
Author: LiuTianle
Reviewers: craig.topper, smaslov, LuoYuanke, wxiao3, annita.zhang, RKSimon, spatel
Reviewed By: craig.topper
Subscribers: kristina, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D60550
llvm-svn: 360017
The default impementation in the base class for TargetLowering::getRegForInlineAsmConstraint doesn't work for mask registers when the VT is a scalar type integer types since the only legal mask types are vXi1. So we end up just getting whatever the first register class that contains the register. Currently this appears to be VK1, but its really dependent on the order tablegen outputs the register classes.
Some code in the caller ends up looking up the type for this register class and find v1i1 then generates a copyfromreg from the physical k-register with the v1i1 type. Then it generates an any_extend from v1i1 to the scalar VT which isn't legal. This bad any_extend sticks around until isel where it selects a MOVZX32rr8 with a v1i1 input or maybe a i8 input. Not sure but eventually we pick up a copy from VK1 to GR8 in MachineIR which isn't supported. This leads to a failure in physical register copying.
This patch uses the scalar type to find a VK class of the right size. In the attached test case this will be VK16. This causes a bitcast from vk16 to i16 to be generated instead of an any_extend. This will be properly iseled to a VK16 to GR32 copy and a GR32->GR16 extract_subreg.
Fixes PR41678
Differential Revision: https://reviews.llvm.org/D61453
llvm-svn: 359837
Limiting scalar hadd/hsub generation to the lowest xmm looks to be unnecessary - we will be extracting one upper xmm whatever, and we can remove a shuffle by using the hop which is inline with what shouldUseHorizontalOp expects to happen anyway.
Testing on btver2 (the main target for fast-hops) shows this is beneficial even for float ops where we have a 'shuffle' to extract the float result:
https://godbolt.org/z/0R-U-K
Differential Revision: https://reviews.llvm.org/D61426
llvm-svn: 359786
We already perform horizontal add/sub if we extract from elements 0 and 1, this patch extends it to non-0/1 element extraction indices (as long as they are from the lowest 128-bit vector).
Differential Revision: https://reviews.llvm.org/D61263
llvm-svn: 359707
This is an alternative to D59669 which more aggressively extracts i1 elements from vXi1 bool vectors using a MOVMSK.
Differential Revision: https://reviews.llvm.org/D61189
llvm-svn: 359666
Current LLVM uses pxor+pinsrb on SSE4+ for INSERT_VECTOR_ELT(ZeroVec, 0, Elt) insead of much simpler movd.
INSERT_VECTOR_ELT(ZeroVec, 0, Elt) is idiomatic construct which is used e.g. for _mm_cvtsi32_si128(Elt) and for lowest element initialization in _mm_set_epi32.
So such inefficient lowering leads to significant performance digradations in ceratin cases switching from SSSE3 to SSE4.
https://bugs.llvm.org/show_bug.cgi?id=41512
Here INSERT_VECTOR_ELT(ZeroVec, 0, Elt) is simply converted to SCALAR_TO_VECTOR(Elt) when applicable since latter is closer match to desired behavior and always efficiently lowered to movd and alike.
Committed on behalf of @Serge_Preis (Serge Preis)
Differential Revision: https://reviews.llvm.org/D60852
llvm-svn: 359545
The MachineFunction wasn't used in getOptimalMemOpType, but more importantly,
this allows reuse of findOptimalMemOpLowering that is calling getOptimalMemOpType.
This is the groundwork for the changes in D59766 and D59787, that allows
implementation of TTI::getMemcpyCost.
Differential Revision: https://reviews.llvm.org/D59785
llvm-svn: 359537
Add target shuffle decoding to isHorizontalBinOp as well as ISD::VECTOR_SHUFFLE support.
This does mean we can go through bitcasts so we need to bitcast the extracted args to ensure they are the correct type
Fixes PR39936 and should help with PR39920/PR39921
Differential Revision: https://reviews.llvm.org/D61245
llvm-svn: 359491
Some of the combines might be further improved if we lower more shuffles with X86ISD::VPERMV3 directly, instead of waiting to combine the results.
llvm-svn: 359400
An xor reduction of a bool vector can be optimized to a parity check of the MOVMSK/BITCAST'd integer - if the population count is odd return 1, else return 0.
Differential Revision: https://reviews.llvm.org/D61230
llvm-svn: 359396
As predicate masks are legal on AVX512 targets, we avoid MOVMSK in these cases, but we can just bitcast the bool vector to the integer equivalent directly - avoiding expansion of the reduction to a shuffle pattern.
llvm-svn: 359386
Fixes PR40332 in the limited case where we're selecting between a target shuffle and a zero vector.
We can extend this in the future to handle more opcodes and non-zero selections.
llvm-svn: 359378
Summary: If we have SSE2 we can use a MOVQ to store 64-bits and avoid falling back to a cmpxchg8b loop. If its a seq_cst store we need to insert an mfence after the store.
Reviewers: spatel, RKSimon, reames, jfb, efriedma
Reviewed By: RKSimon
Subscribers: hiraditya, dexonsmith, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D60546
llvm-svn: 359368
Create a matchBitOpReduction helper that checks for the pattern with any opcode.
First step towards reusing this code to recognize other scalar reduction patterns.
llvm-svn: 359296
As detailed on PR40758, Bobcat/Jaguar can perform vector immediate shifts on the same pipes as vector ANDs with the same latency - so it doesn't make sense to replace a shl+lshr with a shift+and pair as it requires an additional mask (with the extra constant pool, loading and register pressure costs).
Differential Revision: https://reviews.llvm.org/D61068
llvm-svn: 359293
A small step towards combining shuffles across vector sizes - this recognizes when a shuffle's operands are all extracted from the same larger source and tries to combine to an unary shuffle of that source instead. Fixes one of the test cases from PR34380.
Differential Revision: https://reviews.llvm.org/D60512
llvm-svn: 359292
Truncate the movmsk scalar integer result to the equivalent scalar integer width as before but then bitcast to the requested type.
We still have the issue identified in PR41594 but D61114 should handle this.
llvm-svn: 359176
If the types don't match, we can't just remove the shuffle.
There may be some other opportunity for optimization here,
but this should prevent the crashing seen in:
https://bugs.llvm.org/show_bug.cgi?id=41414
llvm-svn: 359095
Circling back to a leftover bit from PR39859:
https://bugs.llvm.org/show_bug.cgi?id=39859#c1
...we have this counter-intuitive (based on the test diffs) opportunity to use 'psubus'.
This appears to be the better perf option for both Haswell and Jaguar based on llvm-mca.
We already do this transform for the SETULT predicate, so this makes the code more
symmetrical too. If we have pminub/pminuw, we prefer those, so this should not affect
anything but pre-SSE4.1 subtargets.
$ cat before.s
movdqa -16(%rip), %xmm2 ## xmm2 = [32768,32768,32768,32768,32768,32768,32768,32768]
pxor %xmm0, %xmm2
pcmpgtw -32(%rip), %xmm2 ## xmm2 = [255,255,255,255,255,255,255,255]
pand %xmm2, %xmm0
pandn %xmm1, %xmm2
por %xmm2, %xmm0
$ cat after.s
movdqa -16(%rip), %xmm2 ## xmm2 = [256,256,256,256,256,256,256,256]
psubusw %xmm0, %xmm2
pxor %xmm3, %xmm3
pcmpeqw %xmm2, %xmm3
pand %xmm3, %xmm0
pandn %xmm1, %xmm3
por %xmm3, %xmm0
$ llvm-mca before.s -mcpu=haswell
Iterations: 100
Instructions: 600
Total Cycles: 909
Total uOps: 700
Dispatch Width: 4
uOps Per Cycle: 0.77
IPC: 0.66
Block RThroughput: 1.8
$ llvm-mca after.s -mcpu=haswell
Iterations: 100
Instructions: 700
Total Cycles: 409
Total uOps: 700
Dispatch Width: 4
uOps Per Cycle: 1.71
IPC: 1.71
Block RThroughput: 1.8
Differential Revision: https://reviews.llvm.org/D60838
llvm-svn: 358999
This was supposed to be NFC, but the change in SDLoc
definitions causes instruction scheduling changes.
There's nothing x86-specific in this code, and it can
likely be used from DAGCombiner's simplifyVBinOp().
llvm-svn: 358930
Summary:
If you pass two 1024 bit vectors in IR with AVX2 on Windows 64. Both vectors will be split in four 256 bit pieces. The four pieces of the first argument will be passed indirectly using 4 gprs. The second argument will get passed via pointers in memory.
The PartOffsets stored for the second argument are all in terms of its original 1024 bit size. So the PartOffsets for each piece are 32 bytes apart. So if we consider it for copy elision we'll only load an 8 byte pointer, but we'll move the address 32 bytes. The stack object size we create for the first part is probably wrong too.
This issue was encountered by ISPC. I'm working on getting a reduce test case, but wanted to go ahead and get feedback on the fix.
Reviewers: rnk
Reviewed By: rnk
Subscribers: dbabokin, llvm-commits, hiraditya
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D60801
llvm-svn: 358817
combineVectorTruncationWithPACKUS is currently splitting the upper bit bit masking into 128-bit subregs and then concatenating them back together.
This was originally done to avoid regressions that caused existing subregs to be concatenated to the larger type just for the AND masking before being extracted again. This was fixed by @spatel (notably rL303997 and rL347356).
This also lets SimplifyDemandedBits do some further improvements before it hits the recursive depth limit.
My only annoyance with this is that we were broadcasting some xmm masks but we seem to have lost them by moving to ymm - but that's a known issue as the logic in lowerBuildVectorAsBroadcast isn't great.
Differential Revision: https://reviews.llvm.org/D60375#inline-539623
llvm-svn: 358692
This replaces the MOVMSK combine introduced at D52121/rL342326
(movmsk (setne (and X, (1 << C)), 0)) -> (movmsk (X << C))
with the more general icmp lowering so it can pick up more cases through bitcasts - notably vXi8 cases which use vXi16 shifts+masks, this patch can remove the mask and use pcmpgtb(0,x) for the sra.
Differential Revision: https://reviews.llvm.org/D60625
llvm-svn: 358651
As discussed on PR41359, this patch renames the pair of shift-mask target feature functions to make their purposes more obvious.
shouldFoldShiftPairToMask -> shouldFoldConstantShiftPairToMask
preferShiftsToClearExtremeBits -> shouldFoldMaskToVariableShiftPair
llvm-svn: 358526
Improves codegen demonstrated by D60512 - instructions represented by X86ISD::PERMV/PERMV3 can never memory fold the operand used for their index register.
This patch updates the 'isUseOfShuffle' helper into the more capable 'isFoldableUseOfShuffle' that recognises that the op is used for a X86ISD::PERMV/PERMV3 index mask and can't be folded - allowing us to use broadcast/subvector-broadcast ops to reduce the size of the mask constant pool data.
Differential Revision: https://reviews.llvm.org/D60562
llvm-svn: 358516
Currently combineHorizontalPredicateResult only handles anyof/allof reduction patterns of legal types, which can be tricky to match as type legalization of bools can introduce bitcasts/truncs/extensions.
This patch extends combineHorizontalPredicateResult to recognise vXi1 bool reductions as well and uses the existing combineBitcastvxi1 helper to create the MOVMSK necessary to then compare the signmask result.
This ensures the accuracy of the reduction costs added in D60403 which assume the MOVMSK generation.
Differential Revision: https://reviews.llvm.org/D60610
llvm-svn: 358286
If the vector setcc has been legalized then we will need to convert a vector boolean of 0 or -1 to a scalar boolean of 0 or 1.
The added test case previously crashed in 32-bit mode by creating a setcc with an i64 condition that type legalization couldn't expand.
llvm-svn: 358218
This patch adds patterns for turning bitcasted atomic load/store into movss/sd.
It also removes the pseudo instructions for atomic RMW fadd. Instead just adding isel patterns for folding an atomic load into addss/sd. And relying on the new movss/sd store pattern to handle the write part.
This also makes the fadd patterns use VEX and EVEX instructions when AVX or AVX512F are enabled.
Differential Revision: https://reviews.llvm.org/D60394
llvm-svn: 358215
With correct test checks this time.
If we have X87, but not SSE2 we can atomicaly load an i64 value into the significand of an 80-bit extended precision x87 register using fild. We can then use a fist instruction to convert it back to an i64 integ
This matches what gcc and icc do for this case and removes an existing FIXME.
llvm-svn: 358214
If we have X87, but not SSE2 we can atomicaly load an i64 value into the significand of an 80-bit extended precision x87 register using fild. We can then use a fist instruction to convert it back to an i64 integer and store it to a stack temporary. From there we can do two 32-bit loads to get the value into integer registers without worrying about atomicness.
This matches what gcc and icc do for this case and removes an existing FIXME.
Differential Revision: https://reviews.llvm.org/D60156
llvm-svn: 358211
Certain optimisations from ConstantHoisting and CGP rely on Selection DAG not
seeing through to the constant in other blocks. Revert this patch while we come
up with a better way to handle that.
I will try to follow this up with some better tests.
llvm-svn: 358113
Returning SDValue() makes the caller think custom lowering was unsuccessful and then it will fall back to trying to expand the original node. This expanded code will end up with no users and end up being pruned later. But it was useless unnecessary work to create it.
Instead return a MERGE_VALUES with all the results so the caller knows something changed. The caller can handle the replacements.
For one of the cases I had to use UNDEF has a dummy value for a result we know is unused. This should get pruned later.
llvm-svn: 357935
I was looking at a potential DAGCombiner fix for 1 of the regressions in D60278, and it caused severe regression test pain because x86 TLI lies about the desirability of 8-bit shift ops.
We've hinted at making all 8-bit ops undesirable for the reason in the code comment:
// TODO: Almost no 8-bit ops are desirable because they have no actual
// size/speed advantages vs. 32-bit ops, but they do have a major
// potential disadvantage by causing partial register stalls.
...but that leads to massive diffs and exposes all kinds of optimization holes itself.
Differential Revision: https://reviews.llvm.org/D60286
llvm-svn: 357912
Previously LowerOperationWrapper took the number of results from the original
node and counted that many results from the new node. This was intended to drop
chain operands from FP_TO_SINT lowering that uses X87 with memory operations to
stack temporaries. The final load had an extra chain output that needs to be
ignored.
Unfortunately, it didn't work with scatter which has 2 result operands, the
mask output which is discarded and a chain output. The chain output is the one
that is needed but it comes second and it would be dropped by the previous
logic here. To workaround this we were doing a ReplaceAllUses in the lowering
code so that the generic legalization code wouldn't see any uses to replace
since it had been given the wrong result/type.
After this change we take the LowerOperation result directly if the original
node has one result. This allows us to directly return the chain from scatter
or the load data from the FP_TO_SINT case. When the original node has multiple
results we'll ensure the returned node has the same number and copy them over.
For cases where the original node has multiple results and the new code for some
reason has even more results, MERGE_VALUES can be used to pass only the needed
results.
llvm-svn: 357887
In the case where we only want the sign bit (e.g. when using PACKSS truncation of comparison results for MOVMSK) then we can just demand the sign bit of the source operands.
This makes use of the fact that PACKSS saturates out of range values to the min/max int values - so the sign bit is always preserved.
Differential Revision: https://reviews.llvm.org/D60333
llvm-svn: 357859
Summary:
This avoids needing an isel pattern for each condition code. And it removes translation switches for converting between Jcc instructions and condition codes.
Now the printer, encoder and disassembler take care of converting the immediate. We use InstAliases to handle the assembly matching. But we print using the asm string in the instruction definition. The instruction itself is marked IsCodeGenOnly=1 to hide it from the assembly parser.
Reviewers: spatel, lebedev.ri, courbet, gchatelet, RKSimon
Reviewed By: RKSimon
Subscribers: MatzeB, qcolombet, eraman, hiraditya, arphaman, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D60228
llvm-svn: 357802
Summary:
Teach SelectionDAG how to compute known bits of ISD::CopyFromReg if
the virtual reg used has one def only.
This can be particularly useful when calling isBaseWithConstantOffset()
with the ISD::CopyFromReg argument, as more optimizations may get enabled
in the result.
Also add a missing truncation on X86, found by testing of this patch.
Change-Id: Id1c9fceec862d118c54a5b53adf72ada5d6daefa
Reviewers: bogner, craig.topper, RKSimon
Reviewed By: RKSimon
Subscribers: lebedev.ri, nemanjai, jvesely, nhaehnle, javed.absar, jsji, jdoerfert, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D59535
llvm-svn: 357745
We already promote SRL and SHL to i32.
This will introduce sign extends sometimes which might be harder to deal with than the zero we use for promoting SRL. I ran this through some of our internal benchmark lists and didn't see any major regressions.
I think there might be some DAG combine improvement opportunities in the test changes here.
Differential Revision: https://reviews.llvm.org/D60278
llvm-svn: 357743
It unnecessarily breaks previously-working code which used varargs,
but didn't pass any float/double arguments (such as EDK2).
Also revert the fixup on top of that:
Revert [X86] Fix a test from r357317
This reverts r357317 (git commit d413f41de6)
This reverts r357380 (git commit 7af32444b9)
llvm-svn: 357718
These inserters inserted some instructions to zero some registers and copied from virtual registers to physical registers.
This change instead inserts the zeros directly into the DAG at lowering time using new ISD opcodes
that take the extra zeroes as inputs. The zeros will then go through isel on their own to select
the MOV32r0 pseudo. Then we just need to mention the physical registers directly
in the isel patterns and the isel table and InstrEmitter will take care of inserting the necessary
copies to/from physical registers.
llvm-svn: 357659
This custom inserter existed so we could do a weird thing where we pretended that the instructions support
a full address mode instead of taking a pointer in EAX/RAX. I think was largely so we could be pointer
size agnostic in the isel pattern.
To make this work we would then put the address into an LEA into EAX/RAX in front of the instruction after
isel. But the LEA is overkill when we just have a base pointer. So we end up using the LEA as a slower MOV
instruction.
With this change we now just do custom selection during isel instead and just assign the incoming address
of the intrinsic into EAX/RAX based on its size. After the intrinsic is selected, we can let isel take
care of selecting an LEA or other operation to do any address computation needed in this basic block.
I've also split the instruction into a 32-bit mode version and a 64-bit mode version so the implicit
use is properly sized based on the pointer. Without this we get comments in the assembly output about
killing eax and defing rax or vice versa depending on whether we define the instruction to use EAX/RAX.
llvm-svn: 357652
This pattern would show up as a regression if we more
aggressively convert vector FP ops to scalar ops.
There's still a missed optimization for the v4f64 legal
case (AVX) because we create that h-op with an undef operand.
We should probably just duplicate the operands for that
pattern to avoid trouble.
llvm-svn: 357642
One motivation for making this change is that the lack of using movmsk is likely
a main source of perf difference between clang and gcc on the C-Ray benchmark as
shown here:
https://www.phoronix.com/scan.php?page=article&item=gcc-clang-2019&num=5
...but this change alone isn't enough to solve that problem.
The 'all-of' examples show what is likely the worst case trade-off: we end up with
an extra instruction (or 2 if we count the 'xor' register clearing). The 'any-of'
examples look clearly better using movmsk because we've traded 2 vector instructions
for 2 scalar instructions, and movmsk may have better timing than the generic 'movq'.
If we examine the llvm-mca output for these cases, it appears that even though the
'all-of' movmsk variant looks worse on paper, it would perform better on both
Haswell and Jaguar.
$ llvm-mca -mcpu=haswell no_movmsk.s -timeline
Iterations: 100
Instructions: 400
Total Cycles: 504
Total uOps: 400
Dispatch Width: 4
uOps Per Cycle: 0.79
IPC: 0.79
Block RThroughput: 1.0
$ llvm-mca -mcpu=haswell movmsk.s -timeline
Iterations: 100
Instructions: 600
Total Cycles: 358
Total uOps: 600
Dispatch Width: 4
uOps Per Cycle: 1.68
IPC: 1.68
Block RThroughput: 1.5
$ llvm-mca -mcpu=btver2 no_movmsk.s -timeline
Iterations: 100
Instructions: 400
Total Cycles: 407
Total uOps: 400
Dispatch Width: 2
uOps Per Cycle: 0.98
IPC: 0.98
Block RThroughput: 2.0
$ llvm-mca -mcpu=btver2 movmsk.s -timeline
Iterations: 100
Instructions: 600
Total Cycles: 311
Total uOps: 600
Dispatch Width: 2
uOps Per Cycle: 1.93
IPC: 1.93
Block RThroughput: 3.0
Finally, there may be CPUs where movmsk is horribly slow (old AMD small cores?), but if
that's true, then we're also almost certainly making the wrong transform already for
reductions with >2 elements, so that should be fixed independently.
Differential Revision: https://reviews.llvm.org/D59997
llvm-svn: 357367
Fixes PR41316 where the expanded PAVG intrinsic had had one of its ADDs turned into an OR due to its operands having no conflicting bits.
llvm-svn: 357351
We need XMM registers to handle varargs with the Win64 ABI. Before we would
silently generate bad code resulting in an assertion failure elsewhere in the
backend.
llvm-svn: 357317
This is probably the least important of our movmsk problems, but I'm starting
at the bottom to reduce distractions.
We were creating a select_cc which bypasses the select and bitmask codegen
optimizations that we have now. If we produce a compare+negate instead, we
allow things like neg/sbb carry bit hacks, and in all cases we avoid a cmov.
There's no partial register update danger in these sequences because we always
produce the zero-register xor ahead of the 'set' if needed.
There seems to be a missing fold for sext of a bool bit here:
negl %ecx
movslq %ecx, %rax
...but that's an independent transform.
Differential Revision: https://reviews.llvm.org/D59818
llvm-svn: 357172
If we know the 2 halves of an oversized zext-in-reg are the same,
don't create those halves independently.
I tried several different approaches to fold this, but it's difficult
to get right during legalization. In the default path, we are creating
a generic shuffle that looks like an unpack high, but it can get
transformed into a different mask (a blend), so it's not
straightforward to match that. If we try to fold after it actually
becomes an X86ISD::UNPCKH node, we can't be sure what the operand node
is - it might be a generic shuffle, or it could be some x86-specific op.
From the test output, we should be doing something like this for SSE4.1
as well, but I'd rather leave that as a follow-up since it involves
changing lowering actions.
Differential Revision: https://reviews.llvm.org/D59777
llvm-svn: 357129
This is not exactly NFC because it should make further combines
of MOVMSK easier to match, but there should be no outward differences
because we have isel patterns in place specifically to allow this. See:
// Also support integer VTs to avoid a int->fp bitcast in the DAG.
llvm-svn: 357128
Enable SSE41 ZERO_EXTEND_VECTOR_INREG shuffle combines - for the PMOVZX(PSHUFD(V)) -> UNPCKH(V,0) pattern we reduce the shuffles (port5-bottleneck on Intel) at the expense of creating a zero (pxor v,v) and an extra register move - which is a good trade off as these are pretty cheap and in most cases it doesn't increase register pressure.
This also exposed a missed opportunity to use combine to ZERO_EXTEND_VECTOR_INREG with folded loads - even if we're in the float domain.
........
Causes PR41249
llvm-svn: 357057
Enable SSE41 ZERO_EXTEND_VECTOR_INREG shuffle combines - for the PMOVZX(PSHUFD(V)) -> UNPCKH(V,0) pattern we reduce the shuffles (port5-bottleneck on Intel) at the expense of creating a zero (pxor v,v) and an extra register move - which is a good trade off as these are pretty cheap and in most cases it doesn't increase register pressure.
This also exposed a missed opportunity to use combine to ZERO_EXTEND_VECTOR_INREG with folded loads - even if we're in the float domain.
llvm-svn: 356864
Just enable this for AVX for now as SSE41 introduces extra register moves for the PMOVZX(PSHUFD(V)) -> UNPCKH(V,0) pattern (but otherwise helps reduce port5 usage on Intel targets).
Only AVX support is required for PR40685 as the issue is due to 8i8->8i32 zext shuffle leftovers.
llvm-svn: 356858
This is yet another step towards solving PR14613:
https://bugs.llvm.org/show_bug.cgi?id=14613
uaddsat X, Y --> (X >u (X + Y)) ? -1 : X + Y
usubsat X, Y --> (X >u Y) ? X - Y : 0
We can't count on a sane vector ISA, so override the default (umin/umax)
expansion of unsigned add/sub saturate in cases where we do not have umin/umax.
Differential Revision: https://reviews.llvm.org/D59006
llvm-svn: 356855
On 32-bit targets without popcnt, we currently expand 64-bit popcnt to sequences of arithmetic and logic ops for each 32-bit half and then add the 32 bit halves together. If we have xmm registers we can use use those to implement the operation instead. This results in less instructions then doing two separate 32-bit popcnt sequences.
This mitigates some of PR41151 for the i64 on i686 case when we have SSE2.
Differential Revision: https://reviews.llvm.org/D59662
llvm-svn: 356808
We used a lock cmpxchg8b to do i64 atomic loads. But if we have SSE2 we can do better and use a plain movq to do the load instead.
I tried to just use an f64 atomic load and add isel patterns to MOVSD(which the domain fixing pass can turn to MOVQ), but the atomic_load SDNode in TargetSelectionDAG.td requires the type to be integer.
So I've emitted VZEXT_LOAD instead which should be selected by isel to a MOVQ. Hopefully we don't need a specific atomic flavor of this. I kept the memory operand from the original AtomicSDNode. I wasn't sure if I might need to set the MOVolatile flag?
I've left some FIXMEs for improvements we can do without SSE2.
Differential Revision: https://reviews.llvm.org/D59679
llvm-svn: 356807
CMPXCHG8B was introduced on i586/pentium generation.
If its not enabled, limit the atomic width to 32 bits so the AtomicExpandPass will expand to lib calls. Unclear if we should be using a different limit for other configs. The default is 1024 and experimentation shows that using an i256 atomic will cause a crash in SelectionDAG.
Differential Revision: https://reviews.llvm.org/D59576
llvm-svn: 356631
This patch enables the use of lowerShuffleAsBitMask for 512-bit blends before
falling back to move immedate, GPR to k-register, and masked op.
I had to make some changes to support v8i64 when i64 is not a legal type. And to
support floating point types.
This trades a load for the move immediate and GPR move which is higher latency.
But its probably better for register pressure not having to hop through other
register classes. The load+and should play better with LICM and
rematerialization I think.
Differential Revision: https://reviews.llvm.org/D59479
llvm-svn: 356618
This patch removes the following dag node opcodes from namespace X86ISD:
RDTSC_DAG,
RDTSCP_DAG,
RDPMC_DAG
The logic that expands RDTSC/RDPMC/XGETBV intrinsics is basically the same. The
only differences are:
RDTSC/RDTSCP don't implicitly read ECX.
RDTSCP also implicitly writes ECX.
I moved the common expansion logic into a helper function with the goal to get
rid of code repetition. That helper is now used for the expansion of
RDTSC/RDTSCP/RDPMC/XGETBV intrinsics.
No functional change intended.
Differential Revision: https://reviews.llvm.org/D59547
llvm-svn: 356546
These changes are related to PR37743 and include:
SelectionDAGBuilder::visitSelect handles the unary SelectPatternFlavor::SPF_ABS case to build ABS node.
Delete the redundant recognizer of the integer ABS pattern from the DAGCombiner.
Add promoting the integer ABS node in the LegalizeIntegerType.
Expand-based legalization of integer result for the ABS nodes.
Expand-based legalization of ABS vector operations.
Add some integer abs testcases for different typesizes for Thumb arch
Add the custom ABS expanding and change the SAD pattern recognizer for X86 arch: The i64 result of the ABS is expanded to:
tmp = (SRA, Hi, 31)
Lo = (UADDO tmp, Lo)
Hi = (XOR tmp, (ADDCARRY tmp, hi, Lo:1))
Lo = (XOR tmp, Lo)
The "detectZextAbsDiff" function is changed for the recognition of pattern with the ABS node. Given a ABS node, detect the following pattern:
(ABS (SUB (ZERO_EXTEND a), (ZERO_EXTEND b))).
Change integer abs testcases for codegen with the ABS node support for AArch64.
Indicate that the ABS is legal for the i64 type when the NEON is supported.
Change the integer abs testcases to show changing of codegen.
Add combine and legalization of ABS nodes for Thumb arch.
Extend 'matchSelectPattern' to recognize the ABS patterns with ICMP_SGE condition.
For discussion, see https://bugs.llvm.org/show_bug.cgi?id=37743
Patch by: @ikulagin (Ivan Kulagin)
Differential Revision: https://reviews.llvm.org/D49837
llvm-svn: 356468
This allows better code size for aarch64 floating point materialization
in a future patch.
Reviewers: evandro
Differential Revision: https://reviews.llvm.org/D58690
llvm-svn: 356389
Summary:
As noted by @andreadb in https://reviews.llvm.org/D59035#inline-525780
If we have `sext (trunc (cmov C0, C1) to i8)`,
we can instead do `cmov (sext (trunc C0 to i8)), (sext (trunc C1 to i8))`
Reviewers: craig.topper, andreadb, RKSimon
Reviewed By: craig.topper
Subscribers: llvm-commits, andreadb
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D59412
llvm-svn: 356301
The asm parser generates the immediate without the SAE bit. So for consistency we should generate the MCInst the same way from CodeGen.
Since they are now both the same, remove the masking from the printer and replace with an llvm_unreachable.
Use a target constant since we're rebuilding the node anyway. Then we don't have to have isel convert it. Saves about 500 bytes from the isel table.
llvm-svn: 356294
Reduce the size of an any-extended i64 scalar_to_vector source to i32 - the any_extend nodes are often introduced by SimplifyDemandedBits.
llvm-svn: 356292
This is an immediate fix for:
https://bugs.llvm.org/show_bug.cgi?id=41066
...but as noted there and the code comments, we should do better
by stubbing this out sooner.
llvm-svn: 356158
The feature flag alone can't be trusted since it can be passed via -mattr. Need to ensure 64-bit mode as well.
We had a 64 bit mode check on the instruction to make the assembler work correctly. But we weren't guarding any of our lowering code or the hooks for the AtomicExpandPass.
I've added 32-bit command lines to atomic128.ll with and without cx16. The tests there would all previously fail if -mattr=cx16 was passed to them. I had to move one test case for f128 to a new file as it seems to have a different 32-bit mode or possibly sse issue.
Differential Revision: https://reviews.llvm.org/D59308
llvm-svn: 356078
Attempt to combine CONCAT_VECTORS nodes, which we only really have pre-legalization.
This encourages a lot of X86ISD::SUBV_BROADCAST generation, so I've added SimplifyDemandedVectorEltsForTargetNode handling for this at the same time.
The X86ISD::VTRUNC regression in shuffle-vs-trunc-256-widen.ll will be handled in a future commit.
llvm-svn: 356064
A fuzzer found the crasher:
https://bugs.chromium.org/p/oss-fuzz/issues/detail?id=13700
The bug was introduced recently here:
rL355741
This is the quick fix. If we need to do this transform
later, then we'd have to extend/truncate the vector setcc
element type to the scalar setcc type (i8).
llvm-svn: 356053
Sanjay Patel