Add a flag to getPredicateAt() that allows making use of the block
value. This allows us to take into account range information from
the current block, rather than only information that is threaded
over edges, making the icmp simplification in CVP a lot more
powerful.
I'm not changing getPredicateAt() to use the block value
unconditionally to avoid any impact on the JumpThreading pass,
which is somewhat picky about LVI query order.
Most test changes here are just icmps that now get dropped (while
previously only a result used in a return was replaced). The three
tests in icmp.ll show some representative improvements. Some of
the folds this enables have been covered by IPSCCP in the meantime,
but LVI can reason about some cases which are hard to support in
IPSCCP, such as in test_br_cmp_with_offset.
The compile-time time cost of doing this is fairly minimal, with
a ~0.05% CTMark regression for ReleaseThinLTO:
https://llvm-compile-time-tracker.com/compare.php?from=709d03f8af4da4204849a70f01798e7cebba2e32&to=6236fd503761f43c99f4537121e057a01056f185&stat=instructions
This is because the block values will typically already be queried
and cached by other CVP optimizations anyway.
Differential Revision: https://reviews.llvm.org/D69686
For IR generated by a compiler, this is really simple: you just take the
datalayout from the beginning of the file, and apply it to all the IR
later in the file. For optimization testcases that don't care about the
datalayout, this is also really simple: we just use the default
datalayout.
The complexity here comes from the fact that some LLVM tools allow
overriding the datalayout: some tools have an explicit flag for this,
some tools will infer a datalayout based on the code generation target.
Supporting this properly required plumbing through a bunch of new
machinery: we want to allow overriding the datalayout after the
datalayout is parsed from the file, but before we use any information
from it. Therefore, IR/bitcode parsing now has a callback to allow tools
to compute the datalayout at the appropriate time.
Not sure if I covered all the LLVM tools that want to use the callback.
(clang? lli? Misc IR manipulation tools like llvm-link?). But this is at
least enough for all the LLVM regression tests, and IR without a
datalayout is not something frontends should generate.
This change had some sort of weird effects for certain CodeGen
regression tests: if the datalayout is overridden with a datalayout with
a different program or stack address space, we now parse IR based on the
overridden datalayout, instead of the one written in the file (or the
default one, if none is specified). This broke a few AVR tests, and one
AMDGPU test.
Outside the CodeGen tests I mentioned, the test changes are all just
fixing CHECK lines and moving around datalayout lines in weird places.
Differential Revision: https://reviews.llvm.org/D78403
Currently ConstantRange::binaryAnd/binaryOr results are too pessimistic
for single element constant ranges.
If both operands are single element ranges, we can use APInt's AND and
OR implementations directly.
Note that some other binary operations on constant ranges can cover the
single element cases naturally, but for OR and AND this unfortunately is
not the case.
Reviewers: nikic, spatel, lebedev.ri
Reviewed By: spatel
Differential Revision: https://reviews.llvm.org/D76446
This is really a known bits style transformation, but known bits isn't context sensitive. The particular case which comes up happens to involve a range which allows range based reasoning to eliminate the mask pattern, so handle that case specifically in CVP.
InstCombine likes to generate the mask-by-low-bits pattern when widening an arithmetic expression which includes a zext in the middle.
Differential Revision: https://reviews.llvm.org/D68811
llvm-svn: 374506
Inference of nowrap flags in CVP has been disabled, because it
triggered a bug in LFTR (https://bugs.llvm.org/show_bug.cgi?id=31181).
This issue has been fixed in D60935, so we should be able to reenable
nowrap flag inference now.
Differential Revision: https://reviews.llvm.org/D62776
llvm-svn: 364228
As it's causing some bot failures (and per request from kbarton).
This reverts commit r358543/ab70da07286e618016e78247e4a24fcb84077fda.
llvm-svn: 358546
Back in https://reviews.llvm.org/D19559, I tried to teach CVP about range facts implied by value/value icmps (i.e. no constants.) In the meantime, we've implemented the optimization, but I couldn't find tests checked in, so adding them.
llvm-svn: 340660
Summary:
(This is a second attempt as https://reviews.llvm.org/D34822 was reverted.)
LazyValueInfo currently computes the constant value of the switch condition through case edges, which allows the constant value to be propagated through the case edges.
But we have seen a case where a zero-extended value of the switch condition is used past case edges for which the constant propagation doesn't occur.
This patch adds a small logic to handle such a case in getEdgeValueLocal().
This is motivated by the Python 2.7 eval loop in PyEval_EvalFrameEx() where the lack of the constant propagation causes longer live ranges and more spill code than necessary.
With this patch, we see that the code size of PyEval_EvalFrameEx() decreases by ~5.4% and a performance test improves by ~4.6%.
Reviewers: sanjoy
Reviewed By: sanjoy
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D36247
llvm-svn: 309986
This causes assertion failures in (a somewhat old version of) SpiderMonkey.
I have already forwarded reproduction instructions to the patch author.
llvm-svn: 309659
Summary:
LazyValueInfo currently computes the constant value of the switch condition through case edges, which allows the constant value to be propagated through the case edges.
But we have seen a case where a zero-extended value of the switch condition is used past case edges for which the constant propagation doesn't occur.
This patch adds a small logic to handle such a case in getEdgeValueLocal().
This is motivated by the Python 2.7 eval loop in PyEval_EvalFrameEx() where the lack of the constant propagation causes longer live ranges and more spill code than necessary.
With this patch, we see that the code size of PyEval_EvalFrameEx() decreases by ~5.4% and a performance test improves by ~4.6%.
Reviewers: wmi, dberlin, sanjoy
Reviewed By: sanjoy
Subscribers: davide, davidxl, llvm-commits
Differential Revision: https://reviews.llvm.org/D34822
llvm-svn: 309415
Take range metadata into account for conditions like this:
%length = load i32, i32* %length_ptr, !range !{i32 0, i32 2147483647}
%cmp = icmp ult i32 %a, %length
This is a common pattern for range checks where the length of the array is dynamically loaded.
Reviewed By: sanjoy
Differential Revision: https://reviews.llvm.org/D23267
llvm-svn: 278496
Currently LVI can only gather value constraints from comparisons like:
* icmp <pred> Val, ...
* icmp ult (add Val, Offset), ...
In fact we can handle any predicate in latter comparisons.
Reviewed By: sanjoy
Differential Revision: https://reviews.llvm.org/D23357
llvm-svn: 278493
The diff is relatively large since I took a chance to rearrange the code I had to touch in a more obvious way, but the key bit is merely using the !range metadata when we can't analyze the instruction further. The previous !range metadata code was essentially just dead since no binary operator or cast will have !range metadata (per Verifier) and it was otherwise dropped on the floor.
llvm-svn: 262751
Somewhat shockingly for an analysis pass which is computing constant ranges, LVI did not understand the ranges provided by range metadata.
As part of this change, I included a change to CVP primarily because doing so made it much easier to write small self contained test cases. CVP was previously only handling the non-local operand case, but given that LVI can sometimes figure out information about instructions standalone, I don't see any reason to restrict this. There could possibly be a compile time impact from this, but I suspect it should be minimal. If anyone has an example which substaintially regresses, please let me know. I could restrict the block local handling to ICmps feeding Terminator instructions if needed.
Note that this patch continues a somewhat bad practice in LVI. In many cases, we know facts about values, and separate context sensitive facts about values. LVI makes no effort to distinguish and will frequently cache the same value fact repeatedly for different contexts. I would like to change this, but that's a large enough change that I want it to go in separately with clear documentation of what's changing. Other examples of this include the non-null handling, and arguments.
As a meta comment: the entire motivation of this change was being able to write smaller (aka reasonable sized) test cases for a future patch teaching LVI about select instructions.
Differential Revision: http://reviews.llvm.org/D13543
llvm-svn: 251606
This update was done with the following bash script:
find test/Transforms -name "*.ll" | \
while read NAME; do
echo "$NAME"
if ! grep -q "^; *RUN: *llc" $NAME; then
TEMP=`mktemp -t temp`
cp $NAME $TEMP
sed -n "s/^define [^@]*@\([A-Za-z0-9_]*\)(.*$/\1/p" < $NAME | \
while read FUNC; do
sed -i '' "s/;\(.*\)\([A-Za-z0-9_]*\):\( *\)@$FUNC\([( ]*\)\$/;\1\2-LABEL:\3@$FUNC(/g" $TEMP
done
mv $TEMP $NAME
fi
done
llvm-svn: 186268
This could probably be made a lot smarter, but this is a common case and doesn't require LVI to scan a lot
of code. With this change CVP can optimize away the "shift == 0" case in Hashing.h that only gets hit when
"shift" is in a range not containing 0.
llvm-svn: 151919
Nikita Popov