Summary:
This patch fixes pr23772 [ARM] r226200 can emit illegal thumb2 instruction: "sub sp, r12, #80".
The violation was that SUB and ADD (reg, immediate) instructions can only write to SP if the source register is also SP. So the above instructions was unpredictable.
To enforce that the instruction t2(ADD|SUB)ri does not write to SP we now enforce the destination register to be rGPR (That exclude PC and SP).
Different than the ARM specification, that defines one instruction that can read from SP, and one that can't, here we inserted one that can't write to SP, and other that can only write to SP as to reuse most of the hard-coded size optimizations.
When performing this change, it uncovered that emitting Thumb2 Reg plus Immediate could not emit all variants of ADD SP, SP #imm instructions before so it was refactored to be able to. (see test/CodeGen/Thumb2/mve-stacksplot.mir where we use a subw sp, sp, Imm12 variant )
It also uncovered a disassembly issue of adr.w instructions, that were only written as SUBW instructions (see llvm/test/MC/Disassembler/ARM/thumb2.txt).
Reviewers: eli.friedman, dmgreen, carwil, olista01, efriedma, andreadb
Reviewed By: efriedma
Subscribers: gbedwell, john.brawn, efriedma, ostannard, kristof.beyls, hiraditya, dmgreen, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D70680
The patch gives out the details of the znver2 scheduler model.
There are few improvements with respect to execution units, latencies and
throughput when compared with znver1.
The tests that were present for znver1 for llvm-mca tool were replicated.
The latencies, execution units, timeline and throughput information are updated for znver2.
Reviewers: craig.topper, Simon Pilgrim
Differential Revision: https://reviews.llvm.org/D66088
Noticed while fixing the reduction costs for D59710 - the SLM model doesn't account for the poor throughput of v2i64 ops.
Numbers taken from Intel AOM (+ checked against Agner)
This patch introduces the following changes to the btver2 scheduling model:
- The number of micro opcodes for YMM loads and stores is now 2 (it was
incorrectly set to 1 for both aligned and misaligned loads/stores).
- Increased the number of AGU resource cycles for YMM loads and stores
to 2cy (instead of 1cy).
- Removed JFPU01 and JFPX from the list of resources consumed by pure
float/vector loads (no MMX).
I verified with llvm-exegesis that pure XMM/YMM loads are no-pipe. Those
are dispatched to the FPU but not really issues on JFPU01.
Differential Revision: https://reviews.llvm.org/D68871
llvm-svn: 374765
Summary:
As disscused in https://bugs.llvm.org/show_bug.cgi?id=43219,
i believe it may be somewhat useful to show //some// aggregates
over all the sea of statistics provided.
Example:
```
Average Wait times (based on the timeline view):
[0]: Executions
[1]: Average time spent waiting in a scheduler's queue
[2]: Average time spent waiting in a scheduler's queue while ready
[3]: Average time elapsed from WB until retire stage
[0] [1] [2] [3]
0. 3 1.0 1.0 4.7 vmulps %xmm0, %xmm1, %xmm2
1. 3 2.7 0.0 2.3 vhaddps %xmm2, %xmm2, %xmm3
2. 3 6.0 0.0 0.0 vhaddps %xmm3, %xmm3, %xmm4
3 3.2 0.3 2.3 <total>
```
I.e. we average the averages.
Reviewers: andreadb, mattd, RKSimon
Reviewed By: andreadb
Subscribers: gbedwell, arphaman, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D68714
llvm-svn: 374361
Before this patch, loads and stores were only tracked by their corresponding
queues in the LSUnit from dispatch until execute stage. In practice we should be
more conservative and assume that memory opcodes leave their queues at
retirement stage.
Basically, loads should leave the load queue only when they have completed and
delivered their data. We conservatively assume that a load is completed when it
is retired. Stores should be tracked by the store queue from dispatch until
retirement. In practice, stores can only leave the store queue if their data can
be written to the data cache.
This is mostly a mechanical change. With this patch, the retire stage notifies
the LSUnit when a memory instruction is retired. That would triggers the release
of LDQ/STQ entries. The only visible change is in memory tests for the bdver2
model. That is because bdver2 is the only model that defines the load/store
queue size.
This patch partially addresses PR39830.
Differential Revision: https://reviews.llvm.org/D68266
llvm-svn: 374034
This adds a -mattr flag to llvm-mca, for cases where the -mcpu option does not
contain all optional features.
Differential Revision: https://reviews.llvm.org/D68190
llvm-svn: 373358
This patch introduces a cut-off threshold for dependency edge frequences with
the goal of simplifying the critical sequence computation. This patch also
removes the cost normalization for loop carried dependencies. We didn't really
need to artificially amplify the cost of loop-carried dependencies since it is
already computed as the integral over time of the delay (in cycle).
In the absence of backend stalls there is no need for computing a critical
sequence. With this patch we early exit from the critical sequence computation
if no bottleneck was reported during the simulation.
llvm-svn: 372337
On BtVer2 conditional SIMD stores are heavily microcoded.
The latency is directly proportional to the number of packed elements extracted
from the input vector. Also, according to micro-benchmarks, most of the
computation seems to be done in the integer unit.
Only a minority of the uOPs is executed by the FPU. The observed behaviour on
the FPU looks similar to this:
- The input MASK value is moved to the Integer Unit
-- [ a VMOVMSK-like uOP-executed on JFPU0].
- In parallel, each element of the input XMM/YMM is extracted and then sent to
the IntegerUnit through JFPU1.
As expected, a (conditional) store is executed for every extracted element.
Interestingly, a (speculative) load is executed for every extracted element too.
It is as-if a "LOAD - BIT_EXTRACT- CMOV" sequence of uOPs is repeated by the
integer unit for every contionally stored element.
VMASKMOVDQU is a special case: the number of speculative loads is always 2
(presumably, one load per quadword). That means, extra shifts and masking is
performed on (one of) the loaded quadwords before each conditional store (that
also explains the big number of non-FP uOPs retired).
This patch replaces the existing writes for conditional SIMD stores (i.e.
WriteFMaskedStore, and WriteFMaskedStoreY) with the following new writes:
WriteFMaskedStore32 [ XMM Packed Single ]
WriteFMaskedStore32Y [ YMM Packed Single ]
WriteFMaskedStore64 [ XMM Packed Double ]
WriteFMaskedStore64Y [ YMM Packed Double ]
Added a wrapper class named X86SchedWriteMaskMove in X86Schedule.td to describe
both RM and MR variants for conditional SIMD moves in a single tablegen
definition.
Instances of that class are then passed in input to multiclass avx_movmask_rm
when constructing MASKMOVPS/PD definitions.
Since this patch introduces new writes, I had to update all the X86 scheduling
models.
Differential Revision: https://reviews.llvm.org/D66801
llvm-svn: 370649
This is a follow up of r369642.
This patch assigns a ReadAfterLd to every implicit register use of instruction
CMPXCHG8B and instruction CMPXCHG16B. Perf micro-benchmarks show that implicit
registers are read after 3cy from the start of execution.
llvm-svn: 369750
Excluding ADC/SBB and the bit-test instructions (BTR/BTS/BTC), the observed
latency of all other RMW integer arithmetic/logic instructions is 6cy and not
5cy.
Example (ADD):
```
addb $0, (%rsp) # Latency: 6cy
addb $7, (%rsp) # Latency: 6cy
addb %sil, (%rsp) # Latency: 6cy
addw $0, (%rsp) # Latency: 6cy
addw $511, (%rsp) # Latency: 6cy
addw %si, (%rsp) # Latency: 6cy
addl $0, (%rsp) # Latency: 6cy
addl $511, (%rsp) # Latency: 6cy
addl %esi, (%rsp) # Latency: 6cy
addq $0, (%rsp) # Latency: 6cy
addq $511, (%rsp) # Latency: 6cy
addq %rsi, (%rsp) # Latency: 6cy
```
The same latency profile applies to SUB/AND/OR/XOR/INC/DEC.
The observed latency of ADC/SBB is 7-8cy. So we need a different write to model
those. Latency of BTS/BTR/BTC is not fixed by this patch (they are much slower
than what the model for btver2 currently reports).
Differential Revision: https://reviews.llvm.org/D66636
llvm-svn: 369748
On Jaguar, XCHG has a latency of 1cy and decodes to 2 macro-opcodes. Maximum
throughput for XCHG is 1 IPC. The byte exchange has worse latency and decodes to
1 extra uOP; maximum observed throughput is 0.5 IPC.
```
xchgb %cl, %dl # Latency: 2cy - uOPs: 3 - 2 ALU
xchgw %cx, %dx # Latency: 1cy - uOPs: 2 - 2 ALU
xchgl %ecx, %edx # Latency: 1cy - uOPs: 2 - 2 ALU
xchgq %rcx, %rdx # Latency: 1cy - uOPs: 2 - 2 ALU
```
The reg-mem forms of XCHG are atomic operations with an observed latency of
16cy. The resource usage is similar to the XCHGrr variants. The biggest
difference is obviously the bus-locking, which prevents the LS to issue other
memory uOPs in parallel until the unlocking store uOP is executed.
```
xchgb %cl, (%rsp) # Latency: 16cy - uOPs: 3 - ECX latency: 11cy
xchgw %cx, (%rsp) # Latency: 16cy - uOPs: 3 - ECX latency: 11cy
xchgl %ecx, (%rsp) # Latency: 16cy - uOPs: 3 - ECX latency: 11cy
xchgq %rcx, (%rsp) # Latency: 16cy - uOPs: 3 - ECX latency: 11cy
```
The exchanged in/out register operand becomes available after 11cy from the
start of execution. Added test xchg.s to verify that we correctly see that
register write committed in 11cy (and not 16cy).
Reg-reg XADD instructions have the same latency/throughput than the byte
exchange (register-register variant).
```
xaddb %cl, %dl # latency: 2cy - uOPs: 3 - 3 ALU
xaddw %cx, %dx # latency: 2cy - uOPs: 3 - 3 ALU
xaddl %ecx, %edx # latency: 2cy - uOPs: 3 - 3 ALU
xaddq %rcx, %rdx # latency: 2cy - uOPs: 3 - 3 ALU
```
The non-atomic RM variants have a latency of 11cy, and decode to 4
macro-opcodes. They still consume 2 ALU pipes, and the exchange in/out register
operand becomes available in 3cy (it matches the 'load-to-use latency').
```
xaddb %cl, (%rsp) # latency: 11cy - uOPs: 4 - 3 ALU
xaddw %cx, (%rsp) # latency: 11cy - uOPs: 4 - 3 ALU
xaddl %ecx, (%rsp) # latency: 11cy - uOPs: 4 - 3 ALU
xaddq %rcx, (%rsp) # latency: 11cy - uOPs: 4 - 3 ALU
```
The atomic XADD variants execute in 16cy. The in/out register operand is
available after 11cy from the start of execution.
```
lock xaddb %cl, (%rsp) # latency: 16cy - uOPs: 4 - 3 ALU -- ECX latency: 11cy
lock xaddw %cx, (%rsp) # latency: 16cy - uOPs: 4 - 3 ALU -- ECX latency: 11cy
lock xaddl %ecx, (%rsp) # latency: 16cy - uOPs: 4 - 3 ALU -- ECX latency: 11cy
lock xaddq %rcx, (%rsp) # latency: 16cy - uOPs: 4 - 3 ALU -- ECX latency: 11cy
```
Added test xadd.s to verify those latencies as well as read-advance values.
Differential Revision: https://reviews.llvm.org/D66535
llvm-svn: 369642
Latency and throughput of LOCK INC/DEC/NEG/NOT is always 19cy.
Number of uOPs is still 1.
Differential Revision: https://reviews.llvm.org/D66469
llvm-svn: 369388
On Jaguar, CMPXCHG has a latency of 11cy, and a maximum throughput of 0.33 IPC.
Throughput is superiorly limited to 0.33 because of the implicit in/out
dependency on register EAX. In the case of repeated non-atomic CMPXCHG with the
same memory location, store-to-load forwarding occurs and values for sequent
loads are quickly forwarded from the store buffer.
Interestingly, the functionality in LLVM that computes the reciprocal throughput
doesn't seem to know about RMW instructions. That functionality only looks at
the "consumed resource cycles" for the throughput computation. It should be
fixed/improved by a future patch. In particular, for RMW instructions, that
logic should also take into account for the write latency of in/out register
operands.
An atomic CMPXCHG has a latency of ~17cy. Throughput is also limited to
~17cy/inst due to cache locking, which prevents other memory uOPs to start
executing before the "lock releasing" store uOP.
CMPXCHG8rr and CMPXCHG8rm are treated specially because they decode to one less
macro opcode. Their latency tend to be the same as the other RR/RM variants. RR
variants are relatively fast 3cy (but still microcoded - 5 macro opcodes).
CMPXCHG8B is 11cy and unfortunately doesn't seem to benefit from store-to-load
forwarding. That means, throughput is clearly limited by the in/out dependency
on GPR registers. The uOP composition is sadly unknown (due to the lack of PMCs
for the Integer pipes). I have reused the same mix of consumed resource from the
other CMPXCHG instructions for CMPXCHG8B too.
LOCK CMPXCHG8B is instead 18cycles.
CMPXCHG16B is 32cycles. Up to 38cycles when the LOCK prefix is specified. Due to
the in/out dependencies, throughput is limited to 1 instruction every 32 (or 38)
cycles dependeing on whether the LOCK prefix is specified or not.
I wouldn't be surprised if the microcode for CMPXCHG16B is similar to 2x
microcode from CMPXCHG8B. So, I have speculatively set the JALU01 consumption to
2x the resource cycles used for CMPXCHG8B.
The two new hasLockPrefix() functions are used by the btver2 scheduling model
check if a MCInst/MachineInst has a LOCK prefix. Calls to hasLockPrefix() have
been encoded in predicates of variant scheduling classes that describe lat/thr
of CMPXCHG.
Differential Revision: https://reviews.llvm.org/D66424
llvm-svn: 369365
In D66424 it has been requested to move all the new tests added by r369278 into
resources-x86_64.s. That is because only the 8b/16 ops should be tested by
resources-cmpxchg.s. This partially reverts r369278.
llvm-svn: 369288
Flag -show-encoding enables the printing of instruction encodings as part of the
the instruction info view.
Example (with flags -mtriple=x86_64-- -mcpu=btver2):
Instruction Info:
[1]: #uOps
[2]: Latency
[3]: RThroughput
[4]: MayLoad
[5]: MayStore
[6]: HasSideEffects (U)
[7]: Encoding Size
[1] [2] [3] [4] [5] [6] [7] Encodings: Instructions:
1 2 1.00 4 c5 f0 59 d0 vmulps %xmm0, %xmm1, %xmm2
1 4 1.00 4 c5 eb 7c da vhaddps %xmm2, %xmm2, %xmm3
1 4 1.00 4 c5 e3 7c e3 vhaddps %xmm3, %xmm3, %xmm4
In this example, column Encoding Size is the size in bytes of the instruction
encoding. Column Encodings reports the actual instruction encodings as byte
sequences in hex (objdump style).
The computation of encodings is done by a utility class named mca::CodeEmitter.
In future, I plan to expose the CodeEmitter to the instruction builder, so that
information about instruction encoding sizes can be used by the simulator. That
would be a first step towards simulating the throughput from the decoders in the
hardware frontend.
Differential Revision: https://reviews.llvm.org/D65948
llvm-svn: 368432
The upper 4 bits of the immediate byte are used to encode a
register. We need to limit the explicit immediate to fit in the
remaining 4 bits.
Fixes PR42899.
llvm-svn: 368123
This patch adds a new llvm-mca flag named -print-imm-hex.
By default, the instruction printer prints immediate operands as decimals. Flag
-print-imm-hex enables the instruction printer to print those operands in hex.
This patch also adds support for MASM binary and hex literal numbers (example
0FFh, 101b).
Added tests to verify the behavior of the new flag. Tests also verify that masm
numeric literal operands are now recognized.
Differential Revision: https://reviews.llvm.org/D65588
llvm-svn: 367671
This patch teaches the bottleneck analysis how to identify and print the most
expensive sequence of instructions according to the simulation. Fixes PR37494.
The goal is to help users identify the sequence of instruction which is most
critical for performance.
A dependency graph is internally used by the bottleneck analysis to describe
data dependencies and processor resource interferences between instructions.
There is one node in the graph for every instruction in the input assembly
sequence. The number of nodes in the graph is independent from the number of
iterations simulated by the tool. It means that a single node of the graph
represents all the possible instances of a same instruction contributed by the
simulated iterations.
Edges are dynamically "discovered" by the bottleneck analysis by observing
instruction state transitions and "backend pressure increase" events generated
by the Execute stage. Information from the events is used to identify critical
dependencies, and materialize edges in the graph. A dependency edge is uniquely
identified by a pair of node identifiers plus an instance of struct
DependencyEdge::Dependency (which provides more details about the actual
dependency kind).
The bottleneck analysis internally ranks dependency edges based on their impact
on the runtime (see field DependencyEdge::Dependency::Cost). To this end, each
edge of the graph has an associated cost. By default, the cost of an edge is a
function of its latency (in cycles). In practice, the cost of an edge is also a
function of the number of cycles where the dependency has been seen as
'contributing to backend pressure increases'. The idea is that the higher the
cost of an edge, the higher is the impact of the dependency on performance. To
put it in another way, the cost of an edge is a measure of criticality for
performance.
Note how a same edge may be found in multiple iteration of the simulated loop.
The logic that adds new edges to the graph checks if an equivalent dependency
already exists (duplicate edges are not allowed). If an equivalent dependency
edge is found, field DependencyEdge::Frequency of that edge is incremented by
one, and the new cost is cumulatively added to the existing edge cost.
At the end of simulation, costs are propagated to nodes through the edges of the
graph. The goal is to identify a critical sequence from a node of the root-set
(composed by node of the graph with no predecessors) to a 'sink node' with no
successors. Note that the graph is intentionally kept acyclic to minimize the
complexity of the critical sequence computation algorithm (complexity is
currently linear in the number of nodes in the graph).
The critical path is finally computed as a sequence of dependency edges. For
edges describing processor resource interferences, the view also prints a
so-called "interference probability" value (by dividing field
DependencyEdge::Frequency by the total number of iterations).
Examples of critical sequence computations can be found in tests added/modified
by this patch.
On output streams that support colored output, instructions from the critical
sequence are rendered with a different color.
Strictly speaking the analysis conducted by the bottleneck analysis view is not
a critical path analysis. The cost of an edge doesn't only depend on the
dependency latency. More importantly, the cost of a same edge may be computed
differently by different iterations.
The number of dependencies is discovered dynamically based on the events
generated by the simulator. However, their number is not fixed. This is
especially true for edges that model processor resource interferences; an
interference may not occur in every iteration. For that reason, it makes sense
to also print out a "probability of interference".
By construction, the accuracy of this analysis (as always) is strongly dependent
on the simulation (and therefore the quality of the information available in the
scheduling model).
That being said, the critical sequence effectively identifies a performance
criticality. Instructions from that sequence are expected to have a very big
impact on performance. So, users can take advantage of this information to focus
their attention on specific interactions between instructions.
In my experience, it works quite well in practice, and produces useful
output (in a reasonable amount time).
Differential Revision: https://reviews.llvm.org/D63543
llvm-svn: 364045
Summary:
llvm.x86.sse.stmxcsr only writes to memory.
llvm.x86.sse.ldmxcsr only reads from memory, and might generate an FPE.
Reviewers: craig.topper, RKSimon
Subscribers: llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D62896
llvm-svn: 363773
Bottleneck Analysis is one of the many views available in llvm-mca. Therefore,
it should be enabled when flag -all-views is passed in input to the tool.
llvm-svn: 362964
This fixes a problem where back-pressure increases caused by register
dependencies were not correctly notified if execution was also delayed by memory
dependencies.
llvm-svn: 361740
This copies the Sandy Bridge zero idiom support to later CPUs. Adding the AVX2 and AVX512F/VL instructions as appropriate.
Differential Revision: https://reviews.llvm.org/D62360
llvm-svn: 361690
This patch fixes PR41523
https://bugs.llvm.org/show_bug.cgi?id=41523
Regions can now nest/overlap provided that they have different names.
Anonymous regions cannot overlap.
Region end markers must specify the region name. The only exception is for when
there is only one user-defined region; in that particular case, the region end
marker doesn't need to specify a name.
Incorrect region end markers are no longer ignored. Instead, the tool reports an
error and we exit with an error code.
Added test cases to verify the new diagnostic error messages.
Updated the llvm-mca docs to reflect this feature change.
Differential Revision: https://reviews.llvm.org/D61676
llvm-svn: 360351
I've started this cleanup more several times now, but got sidetracked
elsewhere, e.g. by llvm-exegesis problems. Not this time, finally!
This is mainly cleaning up the inverse throughput values,
and a few latencies/uops, based on the llvm-exegesis measured values.
Though this is not complete by any means,
there's certainly more cleanup to be done.
The performance numbers (i've only checked by RawSpeed benchmark) aren't
really surprising - overall this *slightly* (< -1%) improves perf.
llvm-svn: 360341
We require d/q suffixes on the memory form of these instructions to disambiguate the memory size.
We don't require it on the register forms, but need to support parsing both with and without it.
Previously we always printed the d/q suffix on the register forms, but it's redundant and
inconsistent with gcc and objdump.
After this patch we should support the d/q for parsing, but not print it when its unneeded.
llvm-svn: 360085
Many of our instructions have both a _Int form used by intrinsics and a form
used by other IR constructs. In the EVEX space the _Int versions usually cover
all the capabilities include broadcasting and rounding. While the other version
only covers simple register/register or register/load forms. For this reason
in EVEX, the non intrinsic form is usually marked isCodeGenOnly=1.
In the VEX encoding space we were less consistent, but usually the _Int version
was the isCodeGenOnly version.
This commit makes the VEX instructions match the EVEX instructions. This was
done by manually studying the AsmMatcher table so its possible I missed some
cases, but we should be closer now.
I'm thinking about using the isCodeGenOnly bit to simplify the EVEX2VEX
tablegen code that disambiguates the _Int and non _Int versions. Currently it
checks register class sizes and Record the memory operands come from. I have
some other changes I was looking into for D59266 that may break the memory check.
I had to make a few scheduler hacks to keep the _Int versions from being treated
differently than the non _Int version.
Differential Revision: https://reviews.llvm.org/D60441
llvm-svn: 358138
It makes more sense to print out the number of micro opcodes that are issued
every cycle rather than the number of instructions issued per cycle.
This behavior is also consistent with the dispatch-stats: numbers from the two
views can now be easily compared.
llvm-svn: 357919
This patch adds an experimental stage named MicroOpQueueStage.
MicroOpQueueStage can be used to simulate a hardware micro-op queue (basically,
a decoupling queue between 'decode' and 'dispatch'). Users can specify a queue
size, as well as a optional MaxIPC (which - in the absence of a "Decoders" stage
- can be used to simulate a different throughput from the decoders).
This stage is added to the default pipeline between the EntryStage and the
DispatchStage only if PipelineOption::MicroOpQueue is different than zero. By
default, llvm-mca sets PipelineOption::MicroOpQueue to the value of hidden flag
-micro-op-queue-size.
Throughput from the decoder can be simulated via another hidden flag named
-decoder-throughput. That flag allows us to quickly experiment with different
frontend throughputs. For targets that declare a loop buffer, flag
-decoder-throughput allows users to do multiple runs, each time simulating a
different throughput from the decoders.
This stage can/will be extended in future. For example, we could add a "buffer
full" event to notify bottlenecks caused by backpressure. flag
-decoder-throughput would probably go away if in future we delegate to another
stage (DecoderStage?) the simulation of a (potentially variable) throughput from
the decoders. For now, flag -decoder-throughput is "good enough" to run some
simple experiments.
Differential Revision: https://reviews.llvm.org/D59928
llvm-svn: 357248
Based on llvm-exegesis measurements.
Now that llvm-exegesis is ~2 magnitudes faster, and is a bit smarter,
it is now possible to continue cleanup of the scheduler model.
With this, there are no more latency inconsistencies for the
opcodes that produce stable measurements, and only a few inconsistencies
for unstable measurements (MMX_* opcodes, opcodes that llvm-exegesis
measures by chaining - CMP, TEST, BT, SETcc, CVT, MOV, etc.)
llvm-svn: 357169
Previously we had a regular form of the instruction used when the immediate was 0-7. And _alt form that allowed the full 8 bit immediate. Codegen would always use the 0-7 form since the immediate was always checked to be in range. Assembly parsing would use the 0-7 form when a mnemonic like vpcomtrueb was used. If the immediate was specified directly the _alt form was used. The disassembler would prefer to use the 0-7 form instruction when the immediate was in range and the _alt form otherwise. This way disassembly would print the most readable form when possible.
The assembly parsing for things like vpcomtrueb relied on splitting the mnemonic into 3 pieces. A "vpcom" prefix, an immediate representing the "true", and a suffix of "b". The tablegenerated printing code would similarly print a "vpcom" prefix, decode the immediate into a string, and then print "b".
The _alt form on the other hand parsed and printed like any other instruction with no specialness.
With this patch we drop to one form and solve the disassembly printing issue by doing custom printing when the immediate is 0-7. The parsing code has been tweaked to turn "vpcomtrueb" into "vpcomb" and then the immediate for the "true" is inserted either before or after the other operands depending on at&t or intel syntax.
I'd rather not do the custom printing, but I tried using an InstAlias for each possible mnemonic for all 8 immediates for all 16 combinations of element size, signedness, and memory/register. The code emitted into printAliasInstr ended up checking the number of operands, the register class of each operand, and the immediate for all 256 aliases. This was repeated for both the at&t and intel printer. Despite a lot of common checks between all of the aliases, when compiled with clang at least this commonality was not well optimized. Nor do all the checks seem necessary. Since I want to do a similar thing for vcmpps/pd/ss/sd which have 32 immediate values and 3 encoding flavors, 3 register sizes, etc. This didn't seem to scale well for clang binary size. So custom printing seemed a better trade off.
I also considered just using the InstAlias for the matching and not the printing. But that seemed like it would add a lot of extra rows to the matcher table. Especially given that the 32 immediates for vpcmpps have 46 strings associated with them.
Differential Revision: https://reviews.llvm.org/D59398
llvm-svn: 356343
Rotate with explicit immediate is a single uop from Haswell on. An immediate of 1 has a dependency on the previous writer of flags, but the other immediate values do not.
The implicit rotate by 1 instruction is 2 uops. But the flags are merged after the rotate uop so the data result does not see the flag dependency. But I don't think we have any way of modeling that.
RORX is 1 uop without the load. 2 uops with the load. We currently model these with WriteShift/WriteShiftLd.
Differential Revision: https://reviews.llvm.org/D59077
llvm-svn: 355636
Haswell and possibly Sandybridge have an optimization for ADC/SBB with immediate 0 to use a single uop flow. This only applies GR16/GR32/GR64 with an 8-bit immediate. It does not apply to GR8. It also does not apply to the implicit AX/EAX/RAX forms.
Differential Revision: https://reviews.llvm.org/D59058
llvm-svn: 355635
Summary:
Since bottleneck hints are enabled via user request, it can be
confusing if no bottleneck information is presented. Such is the
case when no bottlenecks are identified. This patch emits a message
in that case.
Reviewers: andreadb
Reviewed By: andreadb
Subscribers: tschuett, gbedwell, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D59098
llvm-svn: 355628
This patch adds a new flag named -bottleneck-analysis to print out information
about throughput bottlenecks.
MCA knows how to identify and classify dynamic dispatch stalls. However, it
doesn't know how to analyze and highlight kernel bottlenecks. The goal of this
patch is to teach MCA how to correlate increases in backend pressure to backend
stalls (and therefore, the loss of throughput).
From a Scheduler point of view, backend pressure is a function of the scheduler
buffer usage (i.e. how the number of uOps in the scheduler buffers changes over
time). Backend pressure increases (or decreases) when there is a mismatch
between the number of opcodes dispatched, and the number of opcodes issued in
the same cycle. Since buffer resources are limited, continuous increases in
backend pressure would eventually leads to dispatch stalls. So, there is a
strong correlation between dispatch stalls, and how backpressure changed over
time.
This patch teaches how to identify situations where backend pressure increases
due to:
- unavailable pipeline resources.
- data dependencies.
Data dependencies may delay execution of instructions and therefore increase the
time that uOps have to spend in the scheduler buffers. That often translates to
an increase in backend pressure which may eventually lead to a bottleneck.
Contention on pipeline resources may also delay execution of instructions, and
lead to a temporary increase in backend pressure.
Internally, the Scheduler classifies instructions based on whether register /
memory operands are available or not.
An instruction is marked as "ready to execute" only if data dependencies are
fully resolved.
Every cycle, the Scheduler attempts to execute all instructions that are ready
to execute. If an instruction cannot execute because of unavailable pipeline
resources, then the Scheduler internally updates a BusyResourceUnits mask with
the ID of each unavailable resource.
ExecuteStage is responsible for tracking changes in backend pressure. If backend
pressure increases during a cycle because of contention on pipeline resources,
then ExecuteStage sends a "backend pressure" event to the listeners.
That event would contain information about instructions delayed by resource
pressure, as well as the BusyResourceUnits mask.
Note that ExecuteStage also knows how to identify situations where backpressure
increased because of delays introduced by data dependencies.
The SummaryView observes "backend pressure" events and prints out a "bottleneck
report".
Example of bottleneck report:
```
Cycles with backend pressure increase [ 99.89% ]
Throughput Bottlenecks:
Resource Pressure [ 0.00% ]
Data Dependencies: [ 99.89% ]
- Register Dependencies [ 0.00% ]
- Memory Dependencies [ 99.89% ]
```
A bottleneck report is printed out only if increases in backend pressure
eventually caused backend stalls.
About the time complexity:
Time complexity is linear in the number of instructions in the
Scheduler::PendingSet.
The average slowdown tends to be in the range of ~5-6%.
For memory intensive kernels, the slowdown can be significant if flag
-noalias=false is specified. In the worst case scenario I have observed a
slowdown of ~30% when flag -noalias=false was specified.
We can definitely recover part of that slowdown if we optimize class LSUnit (by
doing extra bookkeeping to speedup queries). For now, this new analysis is
disabled by default, and it can be enabled via flag -bottleneck-analysis. Users
of MCA as a library can enable the generation of pressure events through the
constructor of ExecuteStage.
This patch partially addresses https://bugs.llvm.org/show_bug.cgi?id=37494
Differential Revision: https://reviews.llvm.org/D58728
llvm-svn: 355308
Dispatch stall cycles may be associated to multiple dispatch stall events.
Before this patch, each stall cycle was associated with a single stall event.
This patch also improves a couple of code comments, and adds a helper method to
query the Scheduler for dispatch stalls.
llvm-svn: 354877
Summary:
The AX/EAX/RAX with immediate forms are 2 uops just like the AL with immediate.
The modrm form with r8 and immediate is a single uop just like r16/r32/r64 with immediate.
Reviewers: RKSimon, andreadb
Reviewed By: RKSimon
Subscribers: gbedwell, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D58581
llvm-svn: 354754
This patch fixes a bug where register writes performed by optimizable register
moves were sometimes wrongly treated like partial register updates. Before this
patch, llvm-mca wrongly predicted a 1.50 IPC for test reg-move-elimination-6.s
(added by this patch). With this patch, llvm-mca correctly updates the register
defintions in the PRF, and the IPC for that test is now correctly reported as 2.
llvm-svn: 354271
All of these instructions consume one encoded register and the other register is %st. They either write the result to %st or the encoded register. Previously we printed both arguments when the encoded register was written. And we printed one argument when the result was written to %st. For the stack popping forms the encoded register is always the destination and we didn't print both operands. This was inconsistent with gcc and objdump and just makes the output assembly code harder to read.
This patch changes things to always print both operands making us consistent with gcc and objdump. The parser should still be able to handle the single register forms just as it did before. This also matches the GNU assembler behavior.
llvm-svn: 353061
Looking into gcc and objdump behavior more this was overly aggressive. If the register is encoded in the instruction we should print %st(0), if its implicit we should print %st.
I'll be making a more directed change in a future patch.
llvm-svn: 353013
Summary:
When calculating clobbers for MS style inline assembly we fail if the asm clobbers stack top because we print st(0) and try to pass it through the gcc register name check. This was found with when I attempted to make a emms/femms clobber all ST registers. If you use emms/femms in MS inline asm we would try to use st(0) as the clobber name but clang would think that wasn't a valid clobber name.
This also matches what objdump disassembly prints. It's also what is printed by gcc -S.
Reviewers: RKSimon, rnk, efriedma, spatel, andreadb, lebedev.ri
Reviewed By: rnk
Subscribers: eraman, gbedwell, lebedev.ri, llvm-commits
Differential Revision: https://reviews.llvm.org/D57621
llvm-svn: 352985
Summary:
I'm unable to find this number in the "AMD SOG for family 15h".
llvm-exegesis measures the latencies of these instructions as `2`,
which matches the latencies specified in "AMD SOG for family 15h".
However if we look at Agner, Microarchitecture, "AMD Bulldozer, Piledriver,
Steamroller and Excavator pipeline", "Data delay between different execution
domains", the int->ivec transfer is listed as `8`..`10`cy of additional latency.
Also, Agner's "Instruction tables", for Piledriver, lists their latencies as `12`,
which is consistent with `2cy` from exegesis / AMD SOG + `10cy` transfer delay.
Additional data point comes from the fact that Agner's "Instruction tables",
for Jaguar, lists their latencies as `8`; and "AMD SOG for family 16h" does
state the `+6cy` int->ivec delay, which is consistent with instr latency of `1` or `2`.
Reviewers: andreadb, RKSimon, craig.topper
Reviewed By: andreadb
Subscribers: gbedwell, courbet, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D57300
llvm-svn: 352861
Account for bypass delays when computing the latency of scalar int-to-float
conversions.
On Jaguar we need to account for an extra 6cy latency (see AMD fam16h SOG).
This patch also fixes the number of micropcodes for the register-memory variants
of scalar int-to-float conversions.
Differential Revision: https://reviews.llvm.org/D57148
llvm-svn: 352518
Match the coverage of test\CodeGen\X86\avx512-shuffle-schedule.ll so we can get rid of -print-schedule (and fix PR37160) without losing schedule tests
llvm-svn: 352179
This patch adds a new ReadAdvance definition named ReadInt2Fpu.
ReadInt2Fpu allows x86 scheduling models to accurately describe delays caused by
data transfers from the integer unit to the floating point unit.
ReadInt2Fpu currently defaults to a delay of zero cycles (i.e. no delay) for all
x86 models excluding BtVer2. That means, this patch is only a functional change
for the Jaguar cpu model only.
Tablegen definitions for instructions (V)PINSR* have been updated to account for
the new ReadInt2Fpu. That read is mapped to the the GPR input operand.
On Jaguar, int-to-fpu transfers are modeled as a +6cy delay. Before this patch,
that extra delay was added to the opcode latency. In practice, the insert opcode
only executes for 1cy. Most of the actual latency is actually contributed by the
so-called operand-latency. According to the AMD SOG for family 16h, (V)PINSR*
latency is defined by expression f+1, where f is defined as a forwarding delay
from the integer unit to the fpu.
When printing instruction latency from MCA (see InstructionInfoView.cpp) and LLC
(only when flag -print-schedule is speified), we now need to account for any
extra forwarding delays. We do this by checking if scheduling classes declare
any negative ReadAdvance entries. Quoting a code comment in TargetSchedule.td:
"A negative advance effectively increases latency, which may be used for
cross-domain stalls". When computing the instruction latency for the purpose of
our scheduling tests, we now add any extra delay to the formula. This avoids
regressing existing codegen and mca schedule tests. It comes with the cost of an
extra (but very simple) hook in MCSchedModel.
Differential Revision: https://reviews.llvm.org/D57056
llvm-svn: 351965
Ensure we keep avx512f/bw/dq + vl versions separate, add example broadcast tests - this should allow us to better the test coverage of test\CodeGen\X86\avx512-schedule.ll
llvm-svn: 351848
We're getting pretty close to matching/exceeding test coverage of the test\CodeGen\X86\*-schedule.ll files, which should allow us to get rid of -print-schedule and fix PR37160
llvm-svn: 351836
Similar to horizontal ops on D56777, the sse2 (but not mmx) bit shift ops has local forwarding disabled, adding +1cy to the use latency for the result.
Differential Revision: https://reviews.llvm.org/D57026
llvm-svn: 351817
Similar to horizontal ops on D56777, the vpermilpd/vpermilps variable mask ops has local forwarding disabled, adding +1cy to the use latency for the result.
Differential Revision: https://reviews.llvm.org/D57022
llvm-svn: 351815
D56777 added +1cy local forwarding penalty for horizontal operations, but this penalty only affects sse2/xmm variants, the mmx variants don't suffer the penalty.
Confirmed with @andreadb
llvm-svn: 351755
r327630 introduced new write definitions for float/vector loads.
Before that revision, WriteLoad was used by both integer/float (scalar/vector)
load. So, WriteLoad had to conservatively declare a latency to 5cy. That is
because the load-to-use latency for float/vector load is 5cy.
Now that we have dedicated writes for float/vector loads, there is no reason why
we should keep the latency of WriteLoad to 5cy. At the moment, WriteLoad is only
used by scalar integer loads only; we can assume an optimstic 3cy latency for
them.
This patch changes that latency from 5cy to 3cy, and regenerates the affected
scheduling/mca tests.
Differential Revision: https://reviews.llvm.org/D56922
llvm-svn: 351742
On Jaguar, horizontal adds/subs have local forwarding disable.
That means, we pay a compulsory extra cycle of write-back stage, and the value
is not available until the end of that stage.
This patch changes the latency of horizontal operations by adding an extra
cycle. With this patch, latency numbers now match what is reported by perf.
I plan to send another patch to also 'fix' the latency of shuffle operations (on
Jaguar, local forwarding is disabled for vector shuffles too).
Differential Revision: https://reviews.llvm.org/D56777
llvm-svn: 351366
Class InstrBuilder wrongly assumed that llvm targets were always able to return
a non-null pointer when createMCInstrAnalysis() was called on them.
This was causing crashes when simulating executions for targets that don't
provide an MCInstrAnalysis object.
This patch fixes the issue by making MCInstrAnalysis optional.
llvm-svn: 349352
Refactor the scheduling predicates based on `MCInstPredicate`. In this
case, for the Exynos processors.
Differential revision: https://reviews.llvm.org/D55345
llvm-svn: 348774
It was failing as below. Adding a triple seems to help.
--
: 'RUN: at line 2'; /work/llvm.combined/build.release/bin/llvm-mca -march=aarch64 -mcpu=exynos-m1 -resource-pressure=false < /work/llvm.combined/llvm/test/tools/llvm-mca/AArch64/Exynos/direct-branch.s | /work/llvm.combined/build.release/bin/FileCheck /work/llvm.combined/llvm/test/tools/llvm-mca/AArch64/Exynos/direct-branch.s -check-prefixes=ALL,M1
: 'RUN: at line 3'; /work/llvm.combined/build.release/bin/llvm-mca -march=aarch64 -mcpu=exynos-m3 -resource-pressure=false < /work/llvm.combined/llvm/test/tools/llvm-mca/AArch64/Exynos/direct-branch.s | /work/llvm.combined/build.release/bin/FileCheck /work/llvm.combined/llvm/test/tools/llvm-mca/AArch64/Exynos/direct-branch.s -check-prefixes=ALL,M3
--
Exit Code: 1
Command Output (stderr):
--
/work/llvm.combined/llvm/test/tools/llvm-mca/AArch64/Exynos/direct-branch.s:36:12: error: M1-NEXT: expected string not found in input
^
<stdin>:21:2: note: scanning from here
1 0 0.25 b Ltmp0
^
--
llvm-svn: 348577
This patch adds the ability to specify via tablegen which processor resources
are load/store queue resources.
A new tablegen class named MemoryQueue can be optionally used to mark resources
that model load/store queues. Information about the load/store queue is
collected at 'CodeGenSchedule' stage, and analyzed by the 'SubtargetEmitter' to
initialize two new fields in struct MCExtraProcessorInfo named `LoadQueueID` and
`StoreQueueID`. Those two fields are identifiers for buffered resources used to
describe the load queue and the store queue.
Field `BufferSize` is interpreted as the number of entries in the queue, while
the number of units is a throughput indicator (i.e. number of available pickers
for loads/stores).
At construction time, LSUnit in llvm-mca checks for the presence of extra
processor information (i.e. MCExtraProcessorInfo) in the scheduling model. If
that information is available, and fields LoadQueueID and StoreQueueID are set
to a value different than zero (i.e. the invalid processor resource index), then
LSUnit initializes its LoadQueue/StoreQueue based on the BufferSize value
declared by the two processor resources.
With this patch, we more accurately track dynamic dispatch stalls caused by the
lack of LS tokens (i.e. load/store queue full). This is also shown by the
differences in two BdVer2 tests. Stalls that were previously classified as
generic SCHEDULER FULL stalls, are not correctly classified either as "load
queue full" or "store queue full".
About the differences in the -scheduler-stats view: those differences are
expected, because entries in the load/store queue are not released at
instruction issue stage. Instead, those are released at instruction executed
stage. This is the main reason why for the modified tests, the load/store
queues gets full before PdEx is full.
Differential Revision: https://reviews.llvm.org/D54957
llvm-svn: 347857
This change is in preparation for a patch that fixes PR36666.
llvm-mca currently doesn't know if a buffered processor resource describes a
load or store queue. So, any dynamic dispatch stall caused by the lack of
load/store queue entries is normally reported as a generic SCHEDULER stall. See for
example the -dispatch-stats output from the two tests modified by this patch.
In future, processor models will be able to tag processor resources that are
used to describe load/store queues. That information would then be used by
llvm-mca to correctly classify dynamic dispatch stalls caused by the lack of
tokens in the LS.
llvm-svn: 347662
Refactor the scheduling predicates based on `MCInstPredicate`. In this
case, `AArch64InstrInfo::hasShiftedReg()`.
Differential revision: https://reviews.llvm.org/D54820
llvm-svn: 347598
Refactor the scheduling predicates based on `MCInstPredicate`. In this
case, `AArch64InstrInfo::isScaledAddr()`
Differential revision: https://reviews.llvm.org/D54777
llvm-svn: 347597
By default, llvm-mca conservatively assumes that a register operand from the
variadic sequence is both a register read and a register write. That is because
MCInstrDesc doesn't describe extra variadic operands; we don't have enough
dataflow information to tell which register operands from the variadic sequence
is a definition, and which is a use instead.
However, if a variadic instruction is flagged 'mayStore' (but not 'mayLoad'),
and it has no 'unmodeledSideEffects', then llvm-mca (very) optimistically
assumes that any register operand in the variadic sequence is a register read
only. Conversely, if a variadic instruction is marked as 'mayLoad' (but not
'mayStore'), and it has no 'unmodeledSideEffects', then llvm-mca optimistically
assumes that any extra register operand is a register definition only.
These assumptions work quite well for variadic load/store multiple instructions
defined by the ARM backend.
llvm-svn: 347522
`llvm-mca` relies on the predicates to be based on `MCSchedPredicate` in order
to resolve the scheduling for variant instructions. Otherwise, it aborts
the building of the instruction model early.
However, the scheduling model emitter in `TableGen` gives up too soon, unless
all processors use only such predicates.
In order to allow more processors to be used with `llvm-mca`, this patch
emits scheduling transitions if any processor uses these predicates. The
transition emitted for the processors using legacy predicates is the one
specified with `NoSchedPred`, which is based on `MCSchedPredicate`.
Preferably, `llvm-mca` should instead assume a reasonable default when a
variant transition is not based on `MCSchedPredicate` for a given processor.
This issue should be revisited in the future.
Differential revision: https://reviews.llvm.org/D54648
llvm-svn: 347504
With this change, InstrBuilder emits an error if the MCInst sequence contains an
instruction with a variadic opcode, and a non-zero number of variadic operands.
Currently we don't know how to correctly analyze variadic opcodes. The problem
with variadic operands is that there is no information for them in the opcode
descriptor (i.e. MCInstrDesc). That means, we don't know which variadic operands
are defs, and which are uses.
In future, we could try to conservatively assume that any extra register
operands is both a register use and a register definition.
This patch fixes a subtle bug in the evaluation of read/write operands for ARM
VLD1 with implicit index update. Added test vld1-index-update.s
llvm-svn: 347503
RetireControlUnitStatistics now reports extra information about the ROB and the
avg/maximum number of entries consumed over the entire simulation.
Example:
Retire Control Unit - number of cycles where we saw N instructions retired:
[# retired], [# cycles]
0, 109 (17.9%)
1, 102 (16.7%)
2, 399 (65.4%)
Total ROB Entries: 64
Max Used ROB Entries: 35 ( 54.7% )
Average Used ROB Entries per cy: 32 ( 50.0% )
Documentation in llvm/docs/CommandGuide/llvmn-mca.rst has been updated to
reflect this change.
llvm-svn: 347493
This patch fixes an invalid memory read introduced by r346487.
Before this patch, partial register write had to query the latency of the
dependent full register write by calling a method on the full write descriptor.
However, if the full write is from an already retired instruction, chances are
that the EntryStage already reclaimed its memory.
In some parial register write tests, valgrind was reporting an invalid
memory read.
This change fixes the invalid memory access problem. Writes are now responsible
for tracking dependent partial register writes, and notify them in the event of
instruction issued.
That means, partial register writes no longer need to query their associated
full write to check when they are ready to execute.
Added test X86/BtVer2/partial-reg-update-7.s
llvm-svn: 347459
When looking at the tests committed by Roman at r346587, I noticed that numbers
reported by the resource pressure for PdAGU01 were wrong.
In particular, according to the aut-generated CHECK lines in tests
memcpy-like-test.s and store-throughput.s, resource pressure for PdAGU01
was not uniformly distributed among the two AGEN pipes.
It turns out that the reason why pressure was not correctly distributed, was
because the "resource selection strategy" object associated with PdAGU01 was not
correctly updated on the event of AGEN pipe used.
As a result, llvm-mca was not simulating a round-robin pipeline allocation for
PdAGU01. Instead, PdAGU1 was always prioritized over PdAGU0.
This patch fixes the issue; now processor resource strategy objects for
resources declaring multiple units, are correctly notified in the event of
"resource used".
llvm-svn: 346650
There are two AGU units, and per 1cy, there can be either two loads,
or a load and a store; but not two stores, or two loads and a store.
Additionally, loads shouldn't affect the store scheduler and vice versa.
(but *should* affect the PdEX scheduler.)
Required rL346545.
Fixes https://bugs.llvm.org/show_bug.cgi?id=39465
llvm-svn: 346587
As noted by Andrea Di Biagio in https://bugs.llvm.org/show_bug.cgi?id=39465
both the loads and stores occupy both the store and load queues.
This is clearly wrong.
llvm-svn: 346425
During review it was noted that while it appears that
the Piledriver can do two [consecutive] loads per cycle,
it can only do one store per cycle. It was suggested
that the sched model incorrectly models that,
but it was opted to fix this afterwards.
These tests show that the two consecutive loads are
modelled correctly, and one consecutive stores is not
modelled incorrectly. Unless i'm missing the point.
https://bugs.llvm.org/show_bug.cgi?id=39465
llvm-svn: 346404
This patch teaches view RegisterFileStatistics how to report events for
optimizable register moves.
For each processor register file, view RegisterFileStatistics reports the
following extra information:
- Number of optimizable register moves
- Number of register moves eliminated
- Number of zero moves (i.e. register moves that propagate a zero)
- Max Number of moves eliminated per cycle.
Differential Revision: https://reviews.llvm.org/D53976
llvm-svn: 345865
Adding the baseline tests in a preparatory NFC commit,
so that the actual commit shows the *diff*.
Yes, i'm aware that a few of these codegen-based sched tests
are testing wrong instructions, i will fix that afterwards.
For https://reviews.llvm.org/D52779
llvm-svn: 345462
Summary:
This renames the IsParsingMSInlineAsm member variable of AsmLexer to
LexMasmIntegers and moves it up to MCAsmLexer. This is the only behavior
controlled by that variable. I added a public setter, so that it can be
set from outside or from the llvm-mc command line. We may need to
arrange things so that users can get this behavior from clang, but
that's future work.
I also put additional hex literal lexing functionality under this flag
to fix PR32973. It appears that this hex literal parsing wasn't intended
to be enabled in non-masm-style blocks.
Now, masm integers (0b1101 and 0ABCh) work in __asm blocks from clang,
but 0b label references work when using .intel_syntax in standalone .s
files.
However, 0b label references will *not* work from __asm blocks in clang.
They will work from GCC inline asm blocks, which it sounds like is
important for Crypto++ as mentioned in PR36144.
Essentially, we only lex masm literals for inline asm blobs that use
intel syntax. If the .intel_syntax directive is used inside a gnu-style
inline asm statement, masm literals will not be lexed, which is
compatible with gas and llvm-mc standalone .s assembly.
This fixes PR36144 and PR32973.
Reviewers: Gerolf, avt77
Subscribers: eraman, hiraditya, llvm-commits
Differential Revision: https://reviews.llvm.org/D53535
llvm-svn: 345189
A new class named InstructionError has been added to Support.h in order to
improve the error reporting from class InstrBuilder.
The llvm-mca driver is responsible for handling InstructionError objects, and
printing them out to stderr.
The goal of this patch is to remove all the remaining error handling logic from
the library code.
In particular, this allows us to:
- Simplify the logic in InstrBuilder by removing a needless dependency from
MCInstrPrinter.
- Centralize all the error halding logic in a new function named 'runPipeline'
(see llvm-mca.cpp).
This is also a first step towards generalizing class InstrBuilder, so that in
future, we will be able to reuse its logic to also "lower" MachineInstr to
mca::Instruction objects.
Differential Revision: https://reviews.llvm.org/D53585
llvm-svn: 345129
This patch adds the ability to identify instructions that are "move elimination
candidates". It also allows scheduling models to describe processor register
files that allow move elimination.
A move elimination candidate is an instruction that can be eliminated at
register renaming stage.
Each subtarget can specify which instructions are move elimination candidates
with the help of tablegen class "IsOptimizableRegisterMove" (see
llvm/Target/TargetInstrPredicate.td).
For example, on X86, BtVer2 allows both GPR and MMX/SSE moves to be eliminated.
The definition of 'IsOptimizableRegisterMove' for BtVer2 looks like this:
```
def : IsOptimizableRegisterMove<[
InstructionEquivalenceClass<[
// GPR variants.
MOV32rr, MOV64rr,
// MMX variants.
MMX_MOVQ64rr,
// SSE variants.
MOVAPSrr, MOVUPSrr,
MOVAPDrr, MOVUPDrr,
MOVDQArr, MOVDQUrr,
// AVX variants.
VMOVAPSrr, VMOVUPSrr,
VMOVAPDrr, VMOVUPDrr,
VMOVDQArr, VMOVDQUrr
], CheckNot<CheckSameRegOperand<0, 1>> >
]>;
```
Definitions of IsOptimizableRegisterMove from processor models of a same
Target are processed by the SubtargetEmitter to auto-generate a target-specific
override for each of the following predicate methods:
```
bool TargetSubtargetInfo::isOptimizableRegisterMove(const MachineInstr *MI)
const;
bool MCInstrAnalysis::isOptimizableRegisterMove(const MCInst &MI, unsigned
CPUID) const;
```
By default, those methods return false (i.e. conservatively assume that there
are no move elimination candidates).
Tablegen class RegisterFile has been extended with the following information:
- The set of register classes that allow move elimination.
- Maxium number of moves that can be eliminated every cycle.
- Whether move elimination is restricted to moves from registers that are
known to be zero.
This patch is structured in three part:
A first part (which is mostly boilerplate) adds the new
'isOptimizableRegisterMove' target hooks, and extends existing register file
descriptors in MC by introducing new fields to describe properties related to
move elimination.
A second part, uses the new tablegen constructs to describe move elimination in
the BtVer2 scheduling model.
A third part, teaches llm-mca how to query the new 'isOptimizableRegisterMove'
hook to mark instructions that are candidates for move elimination. It also
teaches class RegisterFile how to describe constraints on move elimination at
PRF granularity.
llvm-mca tests for btver2 show differences before/after this patch.
Differential Revision: https://reviews.llvm.org/D53134
llvm-svn: 344334
These should test all the optimizable moves on Jaguar.
A follow-up patch will teach how to recognize these optimizable register moves.
llvm-svn: 344144
Currently we hardcode instructions with ReadAfterLd if the register operands don't need to be available until the folded load has completed. This doesn't take into account the different load latencies of different memory operands (PR36957).
This patch adds a ReadAfterFold def into X86FoldableSchedWrite to replace ReadAfterLd, allowing us to specify the load latency at a scheduler class level.
I've added ReadAfterVec*Ld classes that match the XMM/Scl, XMM and YMM/ZMM WriteVecLoad classes that we currently use, we can tweak these values in future patches once this infrastructure is in place.
Differential Revision: https://reviews.llvm.org/D52886
llvm-svn: 343868
This patch teaches class RegisterFile how to analyze register writes from
instructions that are move elimination candidates.
In particular, it teaches it how to check if a move can be effectively eliminated
by the underlying PRF, and (if necessary) how to perform move elimination.
The long term goal is to allow processor models to describe instructions that
are valid move elimination candidates.
The idea is to let register file definitions in tablegen declare if/when moves
can be eliminated.
This patch is a non functional change.
The logic that performs move elimination is currently disabled. A future patch
will add support for move elimination in the processor models, and enable this
new code path.
llvm-svn: 343691
I was expecting this to be a nfc but Silvermont seems to be setup a little differently:
// A folded store needs a cycle on MEC_RSV for the store data, but it does not need an extra port cycle to recompute the address.
def : WriteRes<WriteRMW, [SLM_MEC_RSV]>;
So moving from WriteStore to WriteRMW reduces predicted port pressure, confirmed by @craig.topper that this is correct.
Differential Revision: https://reviews.llvm.org/D52740
llvm-svn: 343670
This patch adds another variant class to identify zero-idiom VPERM2F128rr
instructions.
On Jaguar, a VPERM wih bit 3 and 7 of the mask set, is a zero-idiom.
Differential Revision: https://reviews.llvm.org/D52663
llvm-svn: 343452
Summary:
While looking at PR35606, I found out that the scheduling info is incorrect.
One can check that it's really a P5+P6 and not a 2*P56 with:
echo -e 'vzeroall\nvandps %xmm1, %xmm2, %xmm3' | ./bin/llvm-exegesis -mode=uops -snippets-file=-
(vandps executes on P5 only)
Reviewers: craig.topper, RKSimon
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D52541
llvm-svn: 343447
We don't correctly model the latency and resource usage information for
zero-idiom VPERM2F128rr on Jaguar.
This is demonstrated by the incorrect numbers in the resource pressure view, and
the timeline view.
A follow up patch will fix this problem.
llvm-svn: 343346
If any prefixes have been specified on the RUN lines that do not end up
ever actually getting printed, raise an Error. This is either an
indication that the run lines just need cleaning up, or that something
is more fundamentally wrong with the test.
Also raise an Error if there are any blocks which cannot be checked
because they are not uniquely covered by a prefix.
Fixed up a couple of tests where the extra checking flagged up issues.
Differential Revision: https://reviews.llvm.org/D48276
llvm-svn: 343332
Insert empty blocks to cause the positions of matching blocks to match
across lists where possible so that later stages of the algorithm can
actually identify them as being identical.
Regenerated all tests with this change.
Differential Revision: https://reviews.llvm.org/D52560
llvm-svn: 343331
As suggested by Craig Topper - I'm going to look at cleaning up the RMW sequences instead.
The uops are slightly different to the register variant, so requires a +1uop tweak
llvm-svn: 342969
Split WriteIMul by size and also by IMUL multiply-by-imm and multiply-by-reg cases.
This removes all the scheduler overrides for gpr multiplies and stops WriteMULH being ignored for BMI2 MULX instructions.
llvm-svn: 342892
Confirmed with Craig Topper - fix a typo that was missing a Port4 uop for ROR*mCL instructions on some Intel models.
Yet another step on the scheduler model cleanup marathon......
llvm-svn: 342846
The SandyBridge model was missing schedule values for the RCL/RCR values - instead using the (incredibly optimistic) WriteShift (now WriteRotate) defaults.
I've added overrides with more realistic (slow) values, based on a mixture of Agner/instlatx64 numbers and what later Intel models do as well.
This is necessary to allow WriteRotate to be updated to remove other rotate overrides.
It'd probably be a good idea to investigate a WriteRotateCarry class at some point but its not high priority given the unusualness of these instructions.
llvm-svn: 342842
This patch introduces a SchedWriteVariant to describe zero-idiom VXORP(S|D)Yrr
and VANDNP(S|D)Yrr.
This is a follow-up of r342555.
On Jaguar, a VXORPSYrr is 2 macro opcodes. Only one opcode is eliminated at
register-renaming stage. The other opcode has to be executed to set the upper
half of the destination YMM.
Same for VANDNP(S|D)Yrr.
Differential Revision: https://reviews.llvm.org/D52347
llvm-svn: 342728
This patch adds the ability for processor models to describe dependency breaking
instructions.
Different processors may specify a different set of dependency-breaking
instructions.
That means, we cannot assume that all processors of the same target would use
the same rules to classify dependency breaking instructions.
The main goal of this patch is to provide the means to describe dependency
breaking instructions directly via tablegen, and have the following
TargetSubtargetInfo hooks redefined in overrides by tabegen'd
XXXGenSubtargetInfo classes (here, XXX is a Target name).
```
virtual bool isZeroIdiom(const MachineInstr *MI, APInt &Mask) const {
return false;
}
virtual bool isDependencyBreaking(const MachineInstr *MI, APInt &Mask) const {
return isZeroIdiom(MI);
}
```
An instruction MI is a dependency-breaking instruction if a call to method
isDependencyBreaking(MI) on the STI (TargetSubtargetInfo object) evaluates to
true. Similarly, an instruction MI is a special case of zero-idiom dependency
breaking instruction if a call to STI.isZeroIdiom(MI) returns true.
The extra APInt is used for those targets that may want to select which machine
operands have their dependency broken (see comments in code).
Note that by default, subtargets don't know about the existence of
dependency-breaking. In the absence of external information, those method calls
would always return false.
A new tablegen class named STIPredicate has been added by this patch to let
processor models classify instructions that have properties in common. The idea
is that, a MCInstrPredicate definition can be used to "generate" an instruction
equivalence class, with the idea that instructions of a same class all have a
property in common.
STIPredicate definitions are essentially a collection of instruction equivalence
classes.
Also, different processor models can specify a different variant of the same
STIPredicate with different rules (i.e. predicates) to classify instructions.
Tablegen backends (in this particular case, the SubtargetEmitter) will be able
to process STIPredicate definitions, and automatically generate functions in
XXXGenSubtargetInfo.
This patch introduces two special kind of STIPredicate classes named
IsZeroIdiomFunction and IsDepBreakingFunction in tablegen. It also adds a
definition for those in the BtVer2 scheduling model only.
This patch supersedes the one committed at r338372 (phabricator review: D49310).
The main advantages are:
- We can describe subtarget predicates via tablegen using STIPredicates.
- We can describe zero-idioms / dep-breaking instructions directly via
tablegen in the scheduling models.
In future, the STIPredicates framework can be used for solving other problems.
Examples of future developments are:
- Teach how to identify optimizable register-register moves
- Teach how to identify slow LEA instructions (each subtarget defining its own
concept of "slow" LEA).
- Teach how to identify instructions that have undocumented false dependencies
on the output registers on some processors only.
It is also (in my opinion) an elegant way to expose knowledge to both external
tools like llvm-mca, and codegen passes.
For example, machine schedulers in LLVM could reuse that information when
internally constructing the data dependency graph for a code region.
This new design feature is also an "opt-in" feature. Processor models don't have
to use the new STIPredicates. It has all been designed to be as unintrusive as
possible.
Differential Revision: https://reviews.llvm.org/D52174
llvm-svn: 342555
A ReadAdvance was incorrectly added to the SchedReadWrite list associated with
the following SSE instructions:
sqrtss
sqrtsd
rsqrtss
rcpss
As a consequence, a wrong operand latency was computed for the register operand
used as the base address of the folded load operand.
This patch removes the wrong ReadAdvance, and updates the llvm-mca test cases.
There is still a problem with correctly modeling partial register writes on XMM
registers This other problem is currently tracked here:
https://bugs.llvm.org/show_bug.cgi?id=38813
Differential Revision: https://reviews.llvm.org/D51542
llvm-svn: 341326
The presence of a ReadAdvance for input operand #0 is problematic
because it changes the input latency of the register used as the base address
for the folded load.
A broadcast cannot start executing if the load address hasn't been computed yet.
In the llvm-mca example, the VBROADCASTSS is dependent on the address generated
by the LEAQ. That means, it cannot start until LEAQ reaches the write-back
stage. If we apply ReadAdvance, then we wrongly assume that the load can start 3
cycles in advance.
Differential Revision: https://reviews.llvm.org/D51534
llvm-svn: 341222
According to the timeline view, sqrtss/sd/rcpss start executing before the load
address for the memory operand is available.
This problem is caused by the presence of a ReadAfterLd (a ReadAdvance). Those
unary operations should not specify a ReadAdvance at all.
llvm-svn: 341213
This patch fixes the number of micro opcodes, and processor resource cycles for
the following AVX instructions:
vinsertf128rr/rm
vperm2f128rr/rm
vbroadcastf128
Tests have been regenerated using the usual scripts in the llvm/utils directory.
Differential Revision: https://reviews.llvm.org/D51492
llvm-svn: 341185
This patch introduces the following changes to the DispatchStatistics view:
* DispatchStatistics now reports the number of dispatched opcodes instead of
the number of dispatched instructions.
* The "Dynamic Dispatch Stall Cycles" table now also reports the percentage of
stall cycles against the total simulated cycles.
This change allows users to easily compare dispatch group sizes with the
processor DispatchWidth.
Before this change, it was difficult to correlate the two numbers, since
DispatchStatistics view reported numbers of instructions (instead of opcodes).
DispatchWidth defines the maximum size of a dispatch group in terms of number of
micro opcodes.
The other change introduced by this patch is related to how DispatchStage
generates "instruction dispatch" events.
In particular:
* There can be multiple dispatch events associated with a same instruction
* Each dispatch event now encapsulates the number of dispatched micro opcodes.
The number of micro opcodes declared by an instruction may exceed the processor
DispatchWidth. Therefore, we cannot assume that instructions are always fully
dispatched in a single cycle.
DispatchStage knows already how to handle instructions declaring a number of
opcodes bigger that DispatchWidth. However, DispatchStage always emitted a
single instruction dispatch event (during the first simulated dispatch cycle)
for instructions dispatched.
With this patch, DispatchStage now correctly notifies multiple dispatch events
for instructions that cannot be dispatched in a single cycle.
A few views had to be modified. Views can no longer assume that there can only
be one dispatch event per instruction.
Tests (and docs) have been updated.
Differential Revision: https://reviews.llvm.org/D51430
llvm-svn: 341055
This patch adds two new fields to the perf report generated by the SummaryView.
Fields are now logically organized into two small groups; only the second group
contains throughput indicators.
Example:
```
Iterations: 100
Instructions: 300
Total Cycles: 414
Total uOps: 700
Dispatch Width: 4
uOps Per Cycle: 1.69
IPC: 0.72
Block RThroughput: 4.0
```
This patch also updates the docs for llvm-mca.
Due to the nature of this change, several tests in the tools/llvm-mca directory
were affected, and had to be updated using script `update_mca_test_checks.py`.
llvm-svn: 340946
This patch also uses colors to highlight problematic wait-time entries.
A problematic entry is an entry with an high wait time that tends to match (or
exceed) the size of the scheduler's buffer.
Color RED is used if an instruction had to wait an average number of cycles
which is bigger than (or equal to) the size of the underlying scheduler's
buffer.
Color YELLOW is used if the time (in cycles) spend waiting for the
operands or pipeline resources is bigger than half the size of the underlying
scheduler's buffer.
Color MAGENTA is used if an instruction does not consume buffer resources
according to the scheduling model.
llvm-svn: 340825
Before this patch, the SchedulerStatistics only printed the maximum number of
buffer entries consumed in each scheduler's queue at a given point of the
simulation.
This patch restructures the reported table, and adds an extra field named
"Average number of used buffer entries" to it.
This patch also uses different colors to help identifying bottlenecks caused by
high scheduler's buffer pressure.
llvm-svn: 340746
This patch fixes a regression introduced at revision 338702.
A processor resource mask was incorrectly implicitly truncated to an unsigned
quantity. Later on, the truncated mask was used to initialize an element of a
vector of processor resource descriptors.
On targets with more than 32 processor resources, some elements of the vector
are left uninitialized. As a consequence, this bug might have eventually caused
a crash due to null dereference in the Scheduler.
This patch fixes PR38575, and adds a test for it.
llvm-svn: 339768
I've put CMPXCHG8B/CMPXCHG16B in the same file, even though technically they are under separate CPUID bits all targets seem to support both (or neither).
llvm-svn: 338595
These aren't exhaustive, but cover some instructions that are only available in 32-bit mode (where would we be without good BCD math performance?).
llvm-svn: 338404
This patch teaches llvm-mca how to identify dependency breaking instructions on
btver2.
An example of dependency breaking instructions is the zero-idiom XOR (example:
`XOR %eax, %eax`), which always generates zero regardless of the actual value of
the input register operands.
Dependency breaking instructions don't have to wait on their input register
operands before executing. This is because the computation is not dependent on
the inputs.
Not all dependency breaking idioms are also zero-latency instructions. For
example, `CMPEQ %xmm1, %xmm1` is independent on
the value of XMM1, and it generates a vector of all-ones.
That instruction is not eliminated at register renaming stage, and its opcode is
issued to a pipeline for execution. So, the latency is not zero.
This patch adds a new method named isDependencyBreaking() to the MCInstrAnalysis
interface. That method takes as input an instruction (i.e. MCInst) and a
MCSubtargetInfo.
The default implementation of isDependencyBreaking() conservatively returns
false for all instructions. Targets may override the default behavior for
specific CPUs, and return a value which better matches the subtarget behavior.
In future, we should teach to Tablegen how to automatically generate the body of
isDependencyBreaking from scheduling predicate definitions. This would allow us
to expose the knowledge about dependency breaking instructions to the machine
schedulers (and, potentially, other codegen passes).
Differential Revision: https://reviews.llvm.org/D49310
llvm-svn: 338372
Summary:
Pretty mechanical follow-up for D49196.
As microarchitecture.pdf notes, "20 AMD Ryzen pipeline",
"20.8 Register renaming and out-of-order schedulers":
The integer register file has 168 physical registers of 64 bits each.
The floating point register file has 160 registers of 128 bits each.
"20.14 Partial register access":
The processor always keeps the different parts of an integer register together.
...
An instruction that writes to part of a register will therefore have a false dependence
on any previous write to the same register or any part of it.
Reviewers: andreadb, courbet, RKSimon, craig.topper, GGanesh
Reviewed By: GGanesh
Subscribers: gbedwell, llvm-commits
Differential Revision: https://reviews.llvm.org/D49393
llvm-svn: 337676
This patch fixes the latency/throughput of LEA instructions in the BtVer2
scheduling model.
On Jaguar, A 3-operands LEA has a latency of 2cy, and a reciprocal throughput of
1. That is because it uses one cycle of SAGU followed by 1cy of ALU1. An LEA
with a "Scale" operand is also slow, and it has the same latency profile as the
3-operands LEA. An LEA16r has a latency of 3cy, and a throughput of 0.5 (i.e.
RThrouhgput of 2.0).
This patch adds a new TIIPredicate named IsThreeOperandsLEAFn to X86Schedule.td.
The tablegen backend (for instruction-info) expands that definition into this
(file X86GenInstrInfo.inc):
```
static bool isThreeOperandsLEA(const MachineInstr &MI) {
return (
(
MI.getOpcode() == X86::LEA32r
|| MI.getOpcode() == X86::LEA64r
|| MI.getOpcode() == X86::LEA64_32r
|| MI.getOpcode() == X86::LEA16r
)
&& MI.getOperand(1).isReg()
&& MI.getOperand(1).getReg() != 0
&& MI.getOperand(3).isReg()
&& MI.getOperand(3).getReg() != 0
&& (
(
MI.getOperand(4).isImm()
&& MI.getOperand(4).getImm() != 0
)
|| (MI.getOperand(4).isGlobal())
)
);
}
```
A similar method is generated in the X86_MC namespace, and included into
X86MCTargetDesc.cpp (the declaration lives in X86MCTargetDesc.h).
Back to the BtVer2 scheduling model:
A new scheduling predicate named JSlowLEAPredicate now checks if either the
instruction is a three-operands LEA, or it is an LEA with a Scale value
different than 1.
A variant scheduling class uses that new predicate to correctly select the
appropriate latency profile.
Differential Revision: https://reviews.llvm.org/D49436
llvm-svn: 337469
Add llvm-mca tests demonstrating how LEA instructions are currently modelled. Once this is working on btver2 I'll copy the test file to the other target directories.
llvm-svn: 337297
registers.
The goal of this patch is to improve the throughput analysis in llvm-mca for the
case where instructions perform partial register writes.
On x86, partial register writes are quite difficult to model, mainly because
different processors tend to implement different register merging schemes in
hardware.
When the code contains partial register writes, the IPC (instructions per
cycles) estimated by llvm-mca tends to diverge quite significantly from the
observed IPC (using perf).
Modern AMD processors (at least, from Bulldozer onwards) don't rename partial
registers. Quoting Agner Fog's microarchitecture.pdf:
" The processor always keeps the different parts of an integer register together.
For example, AL and AH are not treated as independent by the out-of-order
execution mechanism. An instruction that writes to part of a register will
therefore have a false dependence on any previous write to the same register or
any part of it."
This patch is a first important step towards improving the analysis of partial
register updates. It changes the semantic of RegisterFile descriptors in
tablegen, and teaches llvm-mca how to identify false dependences in the presence
of partial register writes (for more details: see the new code comments in
include/Target/TargetSchedule.h - class RegisterFile).
This patch doesn't address the case where a write to a part of a register is
followed by a read from the whole register. On Intel chips, high8 registers
(AH/BH/CH/DH)) can be stored in separate physical registers. However, a later
(dirty) read of the full register (example: AX/EAX) triggers a merge uOp, which
adds extra latency (and potentially affects the pipe usage).
This is a very interesting article on the subject with a very informative answer
from Peter Cordes:
https://stackoverflow.com/questions/45660139/how-exactly-do-partial-registers-on-haswell-skylake-perform-writing-al-seems-to
In future, the definition of RegisterFile can be extended with extra information
that may be used to identify delays caused by merge opcodes triggered by a dirty
read of a partial write.
Differential Revision: https://reviews.llvm.org/D49196
llvm-svn: 337123
Before revision 336728, the "mayLoad" flag for instruction (V)MOVLPSrm was
inferred directly from the "default" pattern associated with the instruction
definition.
r336728 removed special node X86Movlps, and all the patterns associated to it.
Now instruction (V)MOVLPSrm doesn't have a pattern associated to it, and the
'mayLoad/hasSideEffects' flags are left unset.
When the instruction info is emitted by tablegen, method
CodeGenDAGPatterns::InferInstructionFlags() sees that (V)MOVLPSrm doesn't have a
pattern, and flags are undefined. So, it conservatively sets the
"hasSideEffects" flag for it.
As a consequence, we were losing the 'mayLoad' flag, and we were gaining a
'hasSideEffect' flag in its place.
This patch fixes the issue (originally reported by Michael Holmen).
The mca tests show the differences in the instruction info flags. Instructions
that were affected by this problem were: MOVLPSrm/VMOVLPSrm/VMOVLPSZ128rm.
Differential Revision: https://reviews.llvm.org/D49182
llvm-svn: 336818
This makes easier to identify changes in the instruction info flags. It also
helps spotting potential regressions similar to the one recently introduced at
r336728.
Using the same character to mark MayLoad/MayStore/HasSideEffects is problematic
for llvm-lit. When pattern matching substrings, llvm-lit consumes tabs and
spaces. A change in position of the flag marker may not trigger a test failure.
This patch only changes the character used for flag `hasSideEffects`. The reason
why I didn't touch other flags is because I want to avoid spamming the mailing
because of the massive diff due to the numerous tests affected by this change.
In future, each instruction flag should be associated with a different character
in the Instruction Info View.
llvm-svn: 336797
llvm-mca doesn't know that on modern AMD processors, portions of a general
purpose register are not treated independently. So, a partial register write has
a false dependency on the super-register.
The issue with partial register writes will be addressed by a follow-up patch.
llvm-svn: 336778
This is a short-term fix for PR38093.
For now, we llvm::report_fatal_error if the instruction builder finds an
unsupported instruction in the instruction stream.
We need to revisit this fix once we start addressing PR38101.
Essentially, we need a better framework for error handling.
llvm-svn: 336543
This patch modifies the Scheduler heuristic used to select the next instruction
to issue to the pipelines.
The motivating example is test X86/BtVer2/add-sequence.s, for which llvm-mca
wrongly reported an estimated IPC of 1.50. According to perf, the actual IPC for
that test should have been ~2.00.
It turns out that an IPC of 2.00 for test add-sequence.s cannot possibly be
predicted by a Scheduler that only prioritizes instructions based on their
"age". A similar issue also affected test X86/BtVer2/dependent-pmuld-paddd.s,
for which llvm-mca wrongly estimated an IPC of 0.84 instead of an IPC of 1.00.
Instructions in the ReadyQueue are now ranked based on two factors:
- The "age" of an instruction.
- The number of unique users of writes associated with an instruction.
The new logic still prioritizes older instructions over younger instructions to
minimize the pressure on the reorder buffer. However, the number of users of an
instruction now also affects the overall rank. This potentially increases the
ability of the Scheduler to extract instruction level parallelism. This patch
fixes the problem with the wrong IPC reported for test add-sequence.s and test
dependent-pmuld-paddd.s.
llvm-svn: 336420
Summary: As per `Agner's Microarchitecture doc
(21.8 AMD Bobcat and Jaguar pipeline - Dependency-breaking instructions)`,
these, like zero-idioms, are dependency-breaking,
although they produce ones and still consume resources.
FIXME: as discussed in D48877, llvm-mca handling is broken for these.
Reviewers: andreadb
Reviewed By: andreadb
Subscribers: gbedwell, RKSimon, llvm-commits
Differential Revision: https://reviews.llvm.org/D48876
llvm-svn: 336292
This patch teaches llvm-mca how to identify register writes that implicitly zero
the upper portion of a super-register.
On X86-64, a general purpose register is implemented in hardware as a 64-bit
register. Quoting the Intel 64 Software Developer's Manual: "an update to the
lower 32 bits of a 64 bit integer register is architecturally defined to zero
extend the upper 32 bits". Also, a write to an XMM register performed by an AVX
instruction implicitly zeroes the upper 128 bits of the aliasing YMM register.
This patch adds a new method named clearsSuperRegisters to the MCInstrAnalysis
interface to help identify instructions that implicitly clear the upper portion
of a super-register. The rest of the patch teaches llvm-mca how to use that new
method to obtain the information, and update the register dependencies
accordingly.
I compared the kernels from tests clear-super-register-1.s and
clear-super-register-2.s against the output from perf on btver2. Previously
there was a large discrepancy between the estimated IPC and the measured IPC.
Now the differences are mostly in the noise.
Differential Revision: https://reviews.llvm.org/D48225
llvm-svn: 335113
Summary:
First off: i do not have any access to that processor,
so this is purely theoretical, no benchmarks.
I have been looking into b**d**ver2 scheduling profile, and while cross-referencing
the existing b**t**ver2, znver1 profiles, and the reference docs
(`Software Optimization Guide for AMD Family {15,16,17}h Processors`),
i have noticed that only b**t**ver2 scheduling profile specifies these.
Also, there is no mca test coverage.
Reviewers: RKSimon, craig.topper, courbet, GGanesh, andreadb
Reviewed By: GGanesh
Subscribers: gbedwell, vprasad, ddibyend, shivaram, Ashutosh, javed.absar, llvm-commits
Differential Revision: https://reviews.llvm.org/D47676
llvm-svn: 335099
Summary:
I ran llvm-exegesis on SKX, SKL, BDW, HSW, SNB.
Atom is from Agner and SLM is a guess.
I've left AMD processors alone.
Reviewers: RKSimon, craig.topper
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D48079
llvm-svn: 335097
Summary:
Based on
* [[ https://support.amd.com/TechDocs/43479.pdf | AMD64 Architecture Programmer’s Manual Volume 6: 128-Bit and 256-Bit XOP and FMA4 Instructions ]],
* [[ https://support.amd.com/TechDocs/24594.pdf | AMD64 Architecture Programmer’s Manual Volume 3: General-Purpose and System Instructions]],
* https://en.wikipedia.org/wiki/XOP_instruction_set
Appears to be only supported in AMD's 15h generation, so only in b**d**ver[1-4],
for which currently llvm has no scheduling profiles.
Reviewers: RKSimon, craig.topper, andreadb, spatel
Reviewed By: RKSimon
Subscribers: gbedwell, llvm-commits
Differential Revision: https://reviews.llvm.org/D48264
llvm-svn: 335034
When the destination register of a XOP instruction is an XMM register, bits
[255:128] of the corresponding YMM register are cleared.
When the destination register of a EVEX encoded instruction is an XMM/YMM
register, the upper bits of the corresponding ZMM are cleared.
On processors that feature AVX512, a write to an XMM registers always clears the
upper portion of the corresponding ZMM register if the instruction is VEX or
EVEX encoded.
These new tests show some interesting cases which aren't correctly analyzed by
llvm-mca. The lack of knowledge related to the implicit update on the
super-registers is addressed by D48225.
llvm-svn: 334945
There are a lot of instructions to add under these ISAs (and the other AVX512 variants) but this should demonstrate how to test for the EVEX instructions with different maskings
llvm-svn: 334907
Added a Generic x86 cpu set of resource tests to allow us to check all ISAs.
We currently use SandyBridge as our generic CPU model, but it's better if we actually duplicate these tests for if/when we change the model, it also means we don't end up polluting the SandyBridge folder with tests for ISAs it doesn't support.
llvm-svn: 334853
Summary:
While that is indeed a quite interesting summary stat,
there are cases where it does not really add anything
other than consuming extra lines.
Declutters the output of D48190.
Reviewers: RKSimon, andreadb, courbet, craig.topper
Reviewed By: andreadb
Subscribers: javed.absar, gbedwell, llvm-commits
Differential Revision: https://reviews.llvm.org/D48209
llvm-svn: 334833
Summary:
There does not seem to be any other tests for this.
Split off from D47676.
Reviewers: RKSimon, craig.topper, courbet, andreadb
Reviewed By: andreadb
Subscribers: javed.absar, gbedwell, llvm-commits
Differential Revision: https://reviews.llvm.org/D48190
llvm-svn: 334832
On x86-64, a write to register EAX implicitly clears the upper half or RAX.
128-bit AVX instructions clear the upper 128-bit of the YMM register that
aliases the XMM definition register.
llvm-mca doesn't know about register writes that implicitly clear the upper
portion of an aliasing super-register. This issue will be fixed in a future patch.
llvm-svn: 334742
This test checks that a physical register is correctly allocated for the partial
write to register BX.
The ADD instruction has to wait for the write to RBX (and BX) before being
executed.
llvm-svn: 334730
Fixes PR37790.
In some (very rare) cases, the LSUnit (Load/Store unit) was wrongly marking a
load (or store) as "ready to execute" effectively bypassing older memory barrier
instructions.
To reproduce this bug, the memory barrier must be the first instruction in the
input assembly sequence, and it doesn't have to perform any register writes.
llvm-svn: 334633
Summary:
This fixes most of the scheduling info for SKX vector operations.
I had to split a lot of the YMM/ZMM classes into separate classes for YMM and ZMM.
The before/after llvm-exegesis analysis are in the phabricator diff.
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D47721
llvm-svn: 334407
As detailed on Agner's Microarchitecture doc (21.8 AMD Bobcat and Jaguar pipeline - Dependency-breaking instructions), these instructions are dependency breaking and fast-path zero the destination register (and appropriate EFLAGS bits).
llvm-svn: 334303
As detailed on Agner's Microarchitecture doc (21.8 AMD Bobcat and Jaguar pipeline - Dependency-breaking instructions), all these instructions are dependency breaking and zero the destination register.
llvm-svn: 334119
I noticed while working on zero-idiom + dependency-breaking support (PR36671) that most of our binary instruction tests were reusing the same src registers, which would cause the tests to fail once we enable scalar zero-idiom support on btver2. Fixed in all targets to keep them in sync.
llvm-svn: 334110
As detailed on Agner's Microarchitecture doc (21.8 AMD Bobcat and Jaguar pipeline - Dependency-breaking instructions), all these instructions are dependency breaking and zero the destination register.
TODO: Scalar instructions still need to be tested (need to check EFLAGS handling).
llvm-svn: 334104
This is a fix for the problem arising in D47374 (PR37678):
https://bugs.llvm.org/show_bug.cgi?id=37678
We may not have throughput info because it's not specified in the model
or it's not available with variant scheduling, so assume that those
instructions can execute/complete at max-issue-width.
Differential Revision: https://reviews.llvm.org/D47723
llvm-svn: 334055
This patch fixe the logic in ReadState::cycleEvent(). That method was not
correctly updating field `TotalCycles`.
Added extra code comments in class ReadState to better describe each field.
llvm-svn: 334028
This patch is the last of a sequence of three patches related to LLVM-dev RFC
"MC support for variant scheduling classes".
http://lists.llvm.org/pipermail/llvm-dev/2018-May/123181.html
This fixes PR36672.
The main goal of this patch is to teach llvm-mca how to solve variant scheduling
classes. This patch does that, plus it adds new variant scheduling classes to
the BtVer2 scheduling model to identify so-called zero-idioms (i.e. so-called
dependency breaking instructions that are known to generate zero, and that are
optimized out in hardware at register renaming stage).
Without the BtVer2 change, this patch would not have had any meaningful tests.
This patch is effectively the union of two changes:
1) a change that teaches llvm-mca how to resolve variant scheduling classes.
2) a change to the BtVer2 scheduling model that allows us to special-case
packed XOR zero-idioms (this partially fixes PR36671).
Differential Revision: https://reviews.llvm.org/D47374
llvm-svn: 333909
Clement Courbet