Previously, the debug line parser would keep attempting to read data
even if it had run out of data to read. This meant errors in parsing
would often end up being reported as something else, such as an unknown
version or malformed directory/filename table. This patch fixes the
issues by using the Cursor API to capture errors.
Reviewed by: labath
Differential Revision: https://reviews.llvm.org/D83043
Summary:
The byte swap fix for big endian hosts in 9782c922cb (for D81570)
swaps based on the host endianess, but for cross-targeting builds (i.e.
big endian host targeting little endian) the host-endianess won't
necessarily match the generated DWARF. This change updates the test
to use symmetrical constants so the results aren't endian dependent.
Reviewers: jhenderson, hubert.reinterpretcast, stevewan, ikudrin
Reviewed By: ikudrin
Subscribers: ikudrin, aprantl, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D82827
Previously, if there was an error whilst parsing the operands of an
extended opcode, the operands would be treated as zero and printed. This
could potentially be slightly confusing. This patch changes the
behaviour to print the raw bytes instead.
Reviewed by: ikudrin
Differential Revision: https://reviews.llvm.org/D81570
Standard opcodes usually have ULEB128 arguments, so it is generally not
possible to recover from such errors. This patch causes the parser to
stop parsing the table in such situations.
Also don't emit the operands or add data to the table if there is an
error reading these opcodes.
Reviewed by: JDevlieghere
Differential Revision: https://reviews.llvm.org/D81470
Summary:
This makes the code easier to reason about, as it will behave the same
way regardless of whether there is any more data coming after the
presumed end of the prologue.
Reviewers: jhenderson, dblaikie, probinson, ikudrin
Subscribers: hiraditya, MaskRay, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D77557
The verbose printing of unrecognised standard opcodes was broken in
multiple ways (additional blank lines, a closing parenthesis without
opening parenthesis and so on). This patch fixes it, and makes the
output more consistent with other opcodes.
The new line printing for debug line verbose output was inconsistent.
For new rows in the matrix, a blank line followed, whilst the
DW_LNS_copy opcode actually resulted in two blank lines. There was also
potential inconsistency in the blank lines at the end of the table. This
patch mostly resolves these issues - no blank lines appear in the output
except for a single line after the prologue and at table end to separate
it from any subsquent table, plus some instances after error messages.
Also add a unit test for verbose output to test the fine details of new
line placement and other aspects of verbose output.
Reviewed by: dblaikie
Differential Revision: https://reviews.llvm.org/D81102
Verbose and non-verbose parsing of .debug_line produced their output at
different points in the program. The most obvious impact of this was
that error messages were produced at different times, but it also
potentially reduced what clients could do by customising the stream or
warning/error handlers.
This change makes the two variants consistent by printing non-verbose
output inline, the same as verbose output.
Testing of the error messages has been modified to check the messages
always appear in the same location to illustrate the behaviour.
Reviewed by: JDevlieghere, dblaikie, MaskRay, labath
Differential Revision: https://reviews.llvm.org/D80989
Previously, if an extended opcode was truncated, it would manifest as an
"unexpected line op length error" which wasn't quite accurate. This
change checks for errors any time data is read whilst parsing an
extended opcode, and reports any errors detected.
Reviewed by: MaskRay, labath, aprantl
Differential Revision: https://reviews.llvm.org/D80797
Summary:
This is a result of the discussion at D78113. Previously we would be
only giving the current offset at which the error was detected. However,
this was phrased somewhat ambiguously (as it could also mean that end of
data was at that offset). The new error message includes the current
offset as well as the extent of the data being read.
I've changed a couple of file-level static functions into private member
functions in order to avoid passing a bunch of new arguments everywhere.
Reviewers: dblaikie, jhenderson
Subscribers: hiraditya, MaskRay, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D78558
Summary:
Without this we could silently accept an invalid prologue because the
default DataExtractor behavior is to return an empty string when
reaching the end of file. And empty string is also used to terminate
these lists.
This makes the parsing code slightly more complicated, but this
complexity will go away once the parser starts working with truncating
data extractors. The reason I am doing it this way is because without
this, the truncation would regress the quality of error messages (right
now, we produce bad error messages only near EOF, but truncation would
make everything behave as if it was near EOF).
Reviewers: dblaikie, probinson, jhenderson
Subscribers: hiraditya, MaskRay, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D77555
Summary:
1. FileLineInfoSpecifier::Default isn't the default for anything.
Rename to RawValue, which accurately reflects its role.
2. Most functions that take a part of a FileLineInfoSpecifier end up
constructing a full one later or plumb two values through. Make them
all just take a complete FileLineInfoSpecifier.
3. Printing basenames only was handled differently from all other
variants, make it parallel to all the other variants.
Reviewers: jhenderson
Subscribers: hiraditya, MaskRay, rupprecht, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D76394
If the minimum_instruction_length of a debug line program is 0, no
address advancing via special opcodes, DW_LNS_const_add_pc, and
DW_LNS_advance_pc can occur, since the minimum_instruction_length is
used in a multiplication. This patch adds a warning reporting when this
issue occurs.
Reviewed by: probinson
Differential Revision: https://reviews.llvm.org/D75189
The line_range value of a debug line program header is used in divisions
related to special opcodes and DW_LNS_const_add_pc opcodes. As such, a
value of 0 cannot be used. This change introduces a new warning, if such
a situation is identified, and does not perform the relevant
calculations.
Reviewed by: probinson, aprantl
Differential Revision: https://reviews.llvm.org/D43470
This patch adds a check which reports an unsupported value of the
maximum_operations_per_instruction field in a debug line table header.
This is reported once per line table, at most, and only if the tablet
would otherwise need to use it (i.e. never for tables with version 3 or
less, or for tables which don't use DW_LNS_const_add_pc or special
opcodes). Unsupported values are currently any apart from 1.
Reviewed by: probinson, MaskRay
Differential Revision: https://reviews.llvm.org/D74819
Summary:
This should produce slightly better error messages in case of failures.
Only slightly, because this code was pretty careful about that to begin
with -- I've seen code which does much worse.
Reviewers: jhenderson, dblaikie
Subscribers: llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D74899
Prior to this patch, if a DW_LNE_set_address opcode was parsed with an
address size (i.e. with a length after the opcode) of anything other 1,
2, 4, or 8, an llvm_unreachable would be hit, as the data extractor does
not support other values. This patch introduces a new error check that
verifies the address size is one of the supported sizes, in common with
other places within the DWARF parsing.
This patch also fixes calculation of a generated line table's size in
unit tests. One of the tests in this patch highlighted a bug introduced
in 1271cde474, when non-byte operands were used as arguments for
extended or standard opcodes.
Reviewed by: dblaikie
Differential Revision: https://reviews.llvm.org/D73962
The DWARFv2-4 specification for the line table header states that the
include directories and file name tables both end with a single null
byte. Prior to this change, the parser did not detect if this byte was
missing, because it also stopped reading the tables once it reached the
prologue end, as claimed by the header_length field. This change adds a
check that the terminator has been seen at the end of each table.
Reviewed by: dblaikie, MaskRay
Differential Revision: https://reviews.llvm.org/D74413
Also remove some test duplication and add a test case that shows the
maximum version is rejected (this also shows that the value in the error
message is actually in decimal, and not just missing an 0x prefix).
Reviewed by: dblaikie
Differential Revision: https://reviews.llvm.org/D74403
Summary:
Dwarf stores source-file names the three parts:
<compilation_directory><include_directory><filename>
Prior to this change, the code only allowed retrieving either all
three as the absolute path, or just the filename. But many
compile-command lines--especially those in hermetic build systems
don't specify an absolute path, nor just the filename, but rather the
path relative to the compilation directory. This features allows
retrieving them in that style.
Add tests for path printing styles.
Modify createBasicPrologue to handle include directories.
Subscribers: aprantl, hiraditya, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D73383
If a debug line section with version of greater than 5 is encountered,
prior to this change the parser would accept it and treat it as version
5. This might work to some extent, but then it might not at all, as it
really depends on the format of the unspecified future version, which
will be different (otherwise there would be no point in changing the
version number). Any information we could provide has a good chance of
being invalid, so we should just refuse to parse such tables.
Reviewed by: dblaikie, MaskRay
Differential Revision: https://reviews.llvm.org/D74204
Previously, if a debug line Prologue was created via
createBasicPrologue, its TotalLength field did not account for any
contents in the table itself. This change fixes this issue.
Reviewed by: probinson
Differential Revision: https://reviews.llvm.org/D73772
The function a) returned 32-bits when in DWARF64, the PrologueLength
field is 64-bits in size, and b) didn't work for DWARF version 5.
Also deleted some related dead code. With this deletion, getLength is
itself dead, but another change is about to make use of it.
Reviewed by: probinson
Differential Revision: https://reviews.llvm.org/D73626
Many of the debug line prologue errors are not inherently fatal. In most
cases, we can make reasonable assumptions and carry on. This patch does
exactly that. In the case of length problems, the approach of "assume
stated length is correct" is taken which means the offset might need
adjusting.
This is a relanding of b94191fe, fixing an LLD test and the LLDB build.
Reviewed by: dblaikie, labath
Differential Revision: https://reviews.llvm.org/D72158
Many of the debug line prologue errors are not inherently fatal. In most
cases, we can make reasonable assumptions and carry on. This patch does
exactly that. In the case of length problems, the approach of "the
claimed length is correct" is taken to be consistent with other
instances such as the SectionParser, which ignores the read length.
Reviewed by: dblaikie
Differential Revision: https://reviews.llvm.org/D72158
It is possible to try to keep parsing a debug line program even when the
length of an extended opcode does not match what is expected for that
opcode. This patch changes what was previously a fatal error to be
non-fatal. The parser now continues by assuming the the claimed length
is correct, even if it means moving the offset backwards.
Reviewed by: dblaikie
Differential Revision: https://reviews.llvm.org/D72155
Reasonable assumptions can be made when a parsed address length does not
match the expected length, so there's no need for this to be fatal.
Reviewed by: ikudrin
Differential Revision: https://reviews.llvm.org/D72154
Unlike most of our errors in the debug line parser, the "no end of
sequence" message was missing any reference to which line table it
refererred to. This change adds the offset to this message.
Reviewed by: dblaikie
Differential Revision: https://reviews.llvm.org/D72443
If the claimed unit length of a debug line program is such that the line
table would finish past the end of the .debug_line section, an infinite
loop occurs because the data extractor will continue to "read" zeroes
without changing the offset. This previously didn't hit an error because
the line table program handles a series of zeroes as a bad extended
opcode.
This patch fixes the inifinite loop and adds a warning if the program
doesn't fit in the available data.
Reviewed by: JDevlieghere
Differential Revision: https://reviews.llvm.org/D72279
The checkGetOrParseLineTableEmitsError function could end up generating
both recoverable and unrecoverable errors, but it is only intended for
handling the latter.
Reviewed by: dblaikie
Differential Revision: https://reviews.llvm.org/D72156
The Isa register is a uint8_t, but at least on Windows this is
internally an unsigned char, which meant that prior to this patch it got
formatted as an ASCII character, rather than a decimal number. This
patch fixes this by casting it to a uint64_t before printing. I did it
this way instead of using a uint8_t formatter because a) it is simpler,
and b) it allows us to change the internal type of Isa in the future
without this code breaking.
I also took the opportunity to test the printing of the other standard
opcodes.
Reviewed by: probinson
Differential Revision: https://reviews.llvm.org/D71274
This patch exnteds the error handling in the debug line parser to get
rid of the existing MD5 assertion. I want to reuse the debug line parser
from LLVM in LLDB where we cannot crash on invalid input.
Differential revision: https://reviews.llvm.org/D64544
llvm-svn: 366762
The DWARF3 documentation had inconsistency concerning the reserved range
for unit length values. The issue was fixed in DWARF4.
Differential Revision: https://reviews.llvm.org/D64622
llvm-svn: 366190
Summary:
When building with a Default Target set we can experience issues
in the DWARF DebugInfo unit tests because:
They assume we can generate object files for the host platform.
Some tests assume the endianess of the target we are generating
DWARF for and the host match.
This patch correct these issues by ensuring the tests which
generate objects in memory are run with respect to
LVM_DEFAULT_TARGET_TRIPLE and it's endianess.
We also make sure we don't use the hosts address size for line test
and split the triple util function in DwarfUtils into a version
that takes an address size and one that doesn't.
See also for discussion:
http://lists.llvm.org/pipermail/llvm-dev/2019-March/131212.html
Patch by: daltenty
Differential Revision: https://reviews.llvm.org/D62084
llvm-svn: 362454
to reflect the new license.
We understand that people may be surprised that we're moving the header
entirely to discuss the new license. We checked this carefully with the
Foundation's lawyer and we believe this is the correct approach.
Essentially, all code in the project is now made available by the LLVM
project under our new license, so you will see that the license headers
include that license only. Some of our contributors have contributed
code under our old license, and accordingly, we have retained a copy of
our old license notice in the top-level files in each project and
repository.
llvm-svn: 351636
This is patch 2 of 4 NFC refactorings to handle type units and compile
units more consistently and with less concern about the object-file
section that they came from.
Patch 2 takes the existing std::deque<DWARFUnitSection> for type units
and makes it a simple DWARFUnitSection, simplifying the handling of
type units and making it more consistent with compile units.
Differential Revision: https://reviews.llvm.org/D49742
llvm-svn: 338629
Benjamin Kramer