This patch mechanically replaces None with std::nullopt where the
compiler would warn if None were deprecated. The intent is to reduce
the amount of manual work required in migrating from Optional to
std::optional.
This is part of an effort to migrate from llvm::Optional to
std::optional:
https://discourse.llvm.org/t/deprecating-llvm-optional-x-hasvalue-getvalue-getvalueor/63716
The e_flags of existing object files are all 0x3 which happens to be
compatible. From this commit on, all LoongArch objects produced with
upstream LLVM will be of object file ABI v1, which is already supported
by binutils' master branch (to be released as 2.40), and is allowed by
the same binutils version to interlink with v0 objects so the existing
distributions have time to migrate.
Differential Revision: https://reviews.llvm.org/D134601
The ABI for big-endian AArch32, as specified by AAELF32, is above-
averagely complicated. Relocatable object files are expected to store
instruction encodings in byte order matching the ELF file's endianness
(so, big-endian for a BE ELF file). But executable images can
//either// do that //or// store instructions little-endian regardless
of data and ELF endianness (to support BE32 and BE8 platforms
respectively). They signal the latter by setting the EF_ARM_BE8 flag
in the ELF header.
(In the case of the Thumb instruction set, this all means that each
16-bit halfword of a Thumb instruction is stored in one or other
endianness. The two halfwords of a 32-bit Thumb instruction must
appear in the same order no matter what, because the first halfword is
the one that must avoid overlapping the encoding of any 16-bit Thumb
instruction.)
llvm-objdump was unconditionally expecting Arm instructions to be
stored little-endian. So it would correctly disassemble a BE8 image,
but if you gave it a BE32 image or a BE object file, it would retrieve
every instruction in byte-swapped form and disassemble it to
nonsense. (Even an object file output by LLVM itself, because
ARMMCCodeEmitter outputs instructions big-endian in big-endian mode,
which is correct for writing an object file.)
This patch allows llvm-objdump to correctly disassemble all three of
those classes of Arm ELF file. It does it by introducing a new
SubtargetFeature for big-endian instructions, setting it from the ELF
image type and flags during llvm-objdump setup, and teaching both
ARMDisassembler and llvm-objdump itself to pay attention to it when
retrieving instruction data from a section being disassembled.
Differential Revision: https://reviews.llvm.org/D130902
Currently we use the `.llvm.offloading` section to store device-side
objects inside the host, creating a fat binary. The contents of these
sections is currently determined by the name of the section while it
should ideally be determined by its type. This patch adds the new
`SHT_LLVM_OFFLOADING` section type to the ELF section types. Which
should make it easier to identify this specific data format.
Reviewed By: jhenderson
Differential Revision: https://reviews.llvm.org/D129052
This is a resurrection of D106421 with the change that it keeps backward-compatibility. This means decoding the previous version of `LLVM_BB_ADDR_MAP` will work. This is required as the profile mapping tool is not released with LLVM (AutoFDO). As suggested by @jhenderson we rename the original section type value to `SHT_LLVM_BB_ADDR_MAP_V0` and assign a new value to the `SHT_LLVM_BB_ADDR_MAP` section type. The new encoding adds a version byte to each function entry to specify the encoding version for that function. This patch also adds a feature byte to be used with more flexibility in the future. An use-case example for the feature field is encoding multi-section functions more concisely using a different format.
Conceptually, the new encoding emits basic block offsets and sizes as label differences between each two consecutive basic block begin and end label. When decoding, offsets must be aggregated along with basic block sizes to calculate the final offsets of basic blocks relative to the function address.
This encoding uses smaller values compared to the existing one (offsets relative to function symbol).
Smaller values tend to occupy fewer bytes in ULEB128 encoding. As a result, we get about 17% total reduction in the size of the bb-address-map section (from about 11MB to 9MB for the clang PGO binary).
The extra two bytes (version and feature fields) incur a small 3% size overhead to the `LLVM_BB_ADDR_MAP` section size.
Reviewed By: jhenderson
Differential Revision: https://reviews.llvm.org/D121346
This is the first patch of a series to upstream support for the new
subtarget.
Contributors:
Jay Foad <jay.foad@amd.com>
Konstantin Zhuravlyov <kzhuravl_dev@outlook.com>
Patch 1/N for upstreaming AMDGPU gfx11 architectures.
Reviewed By: foad, kzhuravl, #amdgpu
Differential Revision: https://reviews.llvm.org/D124536
This ELF note is aarch64 and Android-specific. It specifies to the
dynamic loader that specific work should be scheduled to enable MTE
protection of stack and heap regions.
Current synthesis of the ".note.android.memtag" ELF note is done in the
Android build system. We'd like to move that to the compiler, and this
is the first step.
Reviewed By: MaskRay, jhenderson
Differential Revision: https://reviews.llvm.org/D119381
Instead of the GNU extension `SHF_GNU_RETAIN`, Solaris provides equivalent
functionality with `SHF_SUNW_NODISCARD`. This patch implements the necessary
support.
Tested on `sparcv9-sun-solaris2.11`, `amd64-pc-solaris2.11`, and
`x86_64-pc-linux-gnu`.
Differential Revision: https://reviews.llvm.org/D107955
This patch adds necessary definitions for LoongArch ELF files, including
relocation types. Also adds initial support to ELFYaml, llvm-objdump,
and llvm-readobj in order to work with LoongArch ELFs.
Differential revision: https://reviews.llvm.org/D115859
Summary:
Add code object v5 support (deafult is still v4)
Generate metadata for implicit kernel args for the new ABI
Set the metadata version to be 1.2
Reviewers:
t-tye, b-sumner, arsenm, and bcahoon
Fixes:
SWDEV-307188, SWDEV-307189
Differential Revision:
https://reviews.llvm.org/D118272
Notes generated in OpenBSD core files provide additional information
about the kernel state and CPU registers. These notes are described
in core.5, which can be viewed here: https://man.openbsd.org/core.5
Differential Revision: https://reviews.llvm.org/D111966
The MSP430 ABI supports build attributes for specifying
the ISA, code model, data model and enum size in ELF object files.
Differential Revision: https://reviews.llvm.org/D107969
Currently when .llvm.call-graph-profile is created by llvm it explicitly encodes the symbol indices. This section is basically a black box for post processing tools. For example, if we run strip -s on the object files the symbol table changes, but indices in that section do not. In non-visible behavior indices point to wrong symbols. The visible behavior indices point outside of Symbol table: "invalid symbol index".
This patch changes the format by using R_*_NONE relocations to indicate the from/to symbols. The Frequency (Weight) will still be in the .llvm.call-graph-profile, but symbol information will be in relocation section. In LLD information from both sections is used to reconstruct call graph profile. Relocations themselves will never be applied.
With this approach post processing tools that handle relocations correctly work for this section also. Tools can add/remove symbols and as long as they handle relocation sections with this approach information stays correct.
Doing a quick experiment with clang-13.
The size went up from 107KB to 322KB, aggregate of all the input sections. Size of clang-13 binary is ~118MB. For users of -fprofile-use/-fprofile-sample-use the size of object files will go up slightly, it will not impact final binary size.
Reviewed By: jhenderson, MaskRay
Differential Revision: https://reviews.llvm.org/D104080
This patch adds support for a new field in the FileHeader, which states
the name to use for the section header string table. This also allows
combining the string table with another string table in the object, e.g.
the symbol name string table. The field is optional. By default,
.shstrtab will continue to be used.
This partially fixes https://bugs.llvm.org/show_bug.cgi?id=50506.
Reviewed by: Higuoxing
Differential Revision: https://reviews.llvm.org/D104035
As suggested in https://bugs.llvm.org/show_bug.cgi?id=50527, this
moves the DenseMapInfo for APInt and APSInt into the respective
headers, removing the need to include APInt.h and APSInt.h from
DenseMapInfo.h.
We could probably do the same from StringRef and ArrayRef as well.
Differential Revision: https://reviews.llvm.org/D103422
The `e_flags` contains a mixture of bitfields and regular ones, ensure all of them can be serialized and deserialized.
Reviewed By: MaskRay
Differential Revision: https://reviews.llvm.org/D100250
- Add the M68k-specific MC layer implementation
- Add ELF support for M68k
- Add M68k-specifc CC and reloc
TODO: Currently AsmParser and disassembler are not implemented yet.
Please use this bug to track the status:
https://bugs.llvm.org/show_bug.cgi?id=48976
Authors: myhsu, m4yers, glaubitz
Differential Revision: https://reviews.llvm.org/D88390
As discussed in D95511, this allows us to encode invalid BBAddrMap
sections to be used in more rigorous testing.
Reviewed By: jhenderson
Differential Revision: https://reviews.llvm.org/D96831
As discussed in D95511, this allows us to encode invalid BBAddrMap
sections to be used in more rigorous testing.
Reviewed By: jhenderson
Differential Revision: https://reviews.llvm.org/D96831
The current support only printed coredump notes, but most binaries also
contain notes. This change adds names for four FreeBSD-specific notes and
pretty-prints three of them:
NT_FREEBSD_ABI_TAG:
This note holds a 32-bit (decimal) integer containing the value of the
__FreeBSD_version macro, which is defined in crt1.o and will hold a value
such as 1300076 for a binary build on a FreeBSD 13 system.
NT_FREEBSD_ARCH_TAG:
A string containing the value of the build-time MACHINE_ARCH
NT_FREEBSD_FEATURE_CTL: A 32-bit flag that indicates to the kernel that
the binary wants certain bevahiour. Examples include setting
NT_FREEBSD_FCTL_ASLR_DISABLE which tells the kernel to disable ASLR.
After this change llvm-readobj also no longer decodes coredump-only
FreeBSD notes in non-coredump files. I've also converted the
note-freebsd.s test to use yaml2obj instead of llvm-mc.
Reviewed By: jhenderson
Differential Revision: https://reviews.llvm.org/D74393
In binutils, the flag is defined for ELFOSABI_GNU and ELFOSABI_FREEBSD.
It can be used to mark a section as a GC root.
In practice, the flag has generic semantics and can be applied to many
EI_OSABI values, so we consider it generic.
Differential Revision: https://reviews.llvm.org/D95728
Currently we don't allow the following definition:
```
Sections:
- Type: SectionHeaderTable
- Name: .foo
Type: SHT_PROGBITS
```
We report an error: "SectionHeaderTable can't be empty. Use 'NoHeaders' key to drop the section header table".
It was implemented in this way earlier, when `SectionHeaderTable`
was a dedicated key outside of the `Sections` list. And we did not
allow to select where the table is written.
Currently it makes sense to allow it, because a user might
want to place the default section header table at an arbitrary position,
e.g. before other sections. In this case it is not convenient and error prone
to require specifying all sections:
```
Sections:
- Type: SectionHeaderTable
Sections:
- Name: .foo
- Name: .strtab
- Name: .shstrtab
- Name: .foo
Type: SHT_PROGBITS
```
This patch allows empty SectionHeaderTable definitions.
Differential revision: https://reviews.llvm.org/D95341
D95140 introduced `static constexpr StringRef TypeStr = "SectionHeaderTable";` member
of `SectionHeaderTable` with in-class initialized. BB reports the link error:
/usr/bin/ld: lib/libLLVMObjectYAML.a(ELFYAML.cpp.o): in function
`llvm::yaml::MappingTraits<std::unique_ptr<llvm::ELFYAML::Chunk, std::default_delete<llvm::ELFYAML::Chunk> > >::mapping(llvm::yaml::IO&, std::unique_ptr<llvm::ELFYAML::Chunk, std::default_delete<llvm::ELFYAML::Chunk> >&)':
ELFYAML.cpp:(.text._ZN4llvm4yaml13MappingTraitsISt10unique_ptrINS_7ELFYAML5ChunkESt14default_deleteIS4_EEE7mappingERNS0_2IOERS7_+0x58): undefined reference to `llvm::ELFYAML::SectionHeaderTable::TypeStr'
/usr/bin/ld: ELFYAML.cpp:(.text._ZN4llvm4yaml13MappingTraitsISt10unique_ptrINS_7ELFYAML5ChunkESt14default_deleteIS4_EEE7mappingERNS0_2IOERS7_+0x353):undefined reference to `llvm::ELFYAML::SectionHeaderTable::TypeStr'
/usr/bin/ld: ELFYAML.cpp:(.text._ZN4llvm4yaml13MappingTraitsISt10unique_ptrINS_7ELFYAML5ChunkESt14default_deleteIS4_EEE7mappingERNS0_2IOERS7_+0x6e5): undefined reference to `llvm::ELFYAML::SectionHeaderTable::TypeStr'
This patch adds a definition to cpp file, I guess it should fix the issue.
This was discussed in D93678 thread.
Currently we have one special chunk - Fill.
This patch re implements the "SectionHeaderTable" key to become a special chunk too.
With that we are able to place the section header table at any location,
just like we place sections.
Differential revision: https://reviews.llvm.org/D95140
Kazu Hirata