The hardware has created a real mess in the naming for add/sub, which
have been renamed basically every generation. Switch the carry out
pseudos to have the gfx9/gfx10 names. We were using the original SI/CI
v_add_i32/v_sub_i32 names. Later targets reintroduced these names as
carryless instructions with a saturating clamp bit, which we do not
define. Do this rename so we can unambiguously add these missing
instructions.
The carry-in versions should also be renamed, but at least those had a
consistent _u32 name to begin with. The 16-bit instructions were also
renamed, but aren't ambiguous.
This does regress assembler error message quality in some cases. In
mismatched wave32/wave64 situations, this will switch from
"unsupported instruction" to "invalid operand", with the error
pointing at the wrong position. I couldn't quite follow how the
assembler selects these, but the previous behavior seemed accidental
to me. It looked like there was a partial attempt to handle this which
was never completed (i.e. there is an AMDGPUOperand::isBoolReg but it
isn't used for anything).
GFX10 image instructions use one or more address operands starting at
vaddr0, instead of a single vaddr operand, to allow for NSA forms.
Differential Revision: https://reviews.llvm.org/D81675
Also fix an SSA violation in a test the MIRParser/verifier fails to
catch. It's illegal to define a subregister in SSA. For the purpose of
the test, it just needs to define the super-register to use the
subregister in the use operand.
This is to fix performance regressions introduced by
86c944d790.
The old search would collect all potentially mergeable instructions in
the entire block. In this case, the same address is written in
multiple places in the block on the other side of a fence. When sorted
by offset, the two unmergeable, identical addresses would be next to
each other and the merge would give up.
Break the search space when we encounter an instruction we won't be
able to merge across. This will keep the identical addresses in
different merge attempts.
This may also improve compile time by reducing the merge list size.
12994a70cf did this for 128-bit classes:
SGPR_128 only includes the real allocatable SGPRs, and SReg_128 adds
the additional non-allocatable TTMP registers. There's no point in
allocating SReg_128 vregs. This shrinks the size of the classes
regalloc needs to consider, which is usually good.
This patch extends it to all classes > 64 bits, for consistency.
Differential Revision: https://reviews.llvm.org/D78622
SILoadStoreOptimizer::checkAndPrepareMerge() expects base and
paired instruction to come in order and scans MBB from base to
the paired instruction. An original order can be changed if
there were a dependent instruction in between and base instruction
was moved.
Fixed by bailing the optimization. In theory it might be possible
still to perform a merge by swapping instructions, but on practice
it bails anyway because it finds dependency on that same instruction
which has resulted in the base move.
Differential Revision: https://reviews.llvm.org/D77245
Based on D72931
This adds a new feature called A16 which is enabled for gfx10.
gfx9 keeps the R128A16 feature so it can share all the instruction encodings
with gfx7/8.
Differential Revision: https://reviews.llvm.org/D73956
I believe this also fixes bugs with CI 32-bit handling, which was
incorrectly skipping offsets that look like signed 32-bit values. Also
validate the offsets are dword aligned before folding.
Summary:
This improves merging of sequences like:
store a, ptr + 4
store b, ptr + 8
store c, ptr + 12
store d, ptr + 16
store e, ptr + 20
store f, ptr
Prior to this patch the basic block was scanned in order to find instructions
to merge and the above sequence would be transformed to:
store4 <a, b, c, d>, ptr + 4
store e, ptr + 20
store r, ptr
With this change, we now sort all the candidate merge instructions by their offset,
so instructions are visited in offset order rather than in the order they appear
in the basic block. We now transform this sequnce into:
store4 <f, a, b, c>, ptr
store2 <d, e>, ptr + 16
Another benefit of this change is that since we have sorted the mergeable lists
by offset, we can easily check if an instruction is mergeable by checking the
offset of the instruction that becomes before or after it in the sorted list.
Once we determine an instruction is not mergeable we can remove it from the list
and avoid having to do the more expensive mergeablilty checks.
Reviewers: arsenm, pendingchaos, rampitec, nhaehnle, vpykhtin
Reviewed By: arsenm, nhaehnle
Subscribers: kerbowa, merge_guards_bot, kzhuravl, jvesely, wdng, yaxunl, dstuttard, tpr, t-tye, hiraditya, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D65966
Summary:
Modify CombineInfo to only store information about a single instruction.
This is a little easier to work with and removes a lot of duplicate
initialization code.
Reviewers: arsenm, nhaehnle
Reviewed By: arsenm, nhaehnle
Subscribers: merge_guards_bot, kzhuravl, jvesely, wdng, yaxunl, dstuttard, tpr, t-tye, hiraditya, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D71045
Summary:
We should check for same instruction class before checking whether they
have the same base address, else we might iterate out of bounds of a
MachineInstr operands list. The InstClass check is also cheaper.
This was introduced in SVN r373630.
Reviewers: tstellar
Subscribers: arsenm, kzhuravl, jvesely, wdng, yaxunl, dstuttard, tpr, t-tye, hiraditya, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D68690
This file lists every pass in LLVM, and is included by Pass.h, which is
very popular. Every time we add, remove, or rename a pass in LLVM, it
caused lots of recompilation.
I found this fact by looking at this table, which is sorted by the
number of times a file was changed over the last 100,000 git commits
multiplied by the number of object files that depend on it in the
current checkout:
recompiles touches affected_files header
342380 95 3604 llvm/include/llvm/ADT/STLExtras.h
314730 234 1345 llvm/include/llvm/InitializePasses.h
307036 118 2602 llvm/include/llvm/ADT/APInt.h
213049 59 3611 llvm/include/llvm/Support/MathExtras.h
170422 47 3626 llvm/include/llvm/Support/Compiler.h
162225 45 3605 llvm/include/llvm/ADT/Optional.h
158319 63 2513 llvm/include/llvm/ADT/Triple.h
140322 39 3598 llvm/include/llvm/ADT/StringRef.h
137647 59 2333 llvm/include/llvm/Support/Error.h
131619 73 1803 llvm/include/llvm/Support/FileSystem.h
Before this change, touching InitializePasses.h would cause 1345 files
to recompile. After this change, touching it only causes 550 compiles in
an incremental rebuild.
Reviewers: bkramer, asbirlea, bollu, jdoerfert
Differential Revision: https://reviews.llvm.org/D70211
Summary:
Extend the SI Load/Store optimizer to merge MIMG load instructions. Handle
different flavours of image_load and image_sample instructions.
When the instructions of the same subclass differ only in dmask, merge
them and update dmask accordingly.
Reviewers: nhaehnle
Reviewed By: nhaehnle
Subscribers: arsenm, kzhuravl, jvesely, wdng, nhaehnle, yaxunl, dstuttard, tpr, t-tye, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D64911
llvm-svn: 374984
SGPR_128 only includes the real allocatable SGPRs, and SReg_128 adds
the additional non-allocatable TTMP registers. There's no point in
allocating SReg_128 vregs. This shrinks the size of the classes
regalloc needs to consider, which is usually good.
llvm-svn: 374284
Summary:
This patch fixes a potential aliasing problem in InstClassEnum,
where local values were mixed with machine opcodes.
Introducing InstSubclass will keep them separate and help extending
InstClassEnum with other instruction types (e.g. MIMG) in the future.
This patch also makes getSubRegIdxs() more concise.
Reviewers: nhaehnle, arsenm, tstellar
Reviewed By: arsenm
Subscribers: arsenm, kzhuravl, jvesely, wdng, nhaehnle, yaxunl, dstuttard, tpr, t-tye, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D68384
llvm-svn: 373699
Summary:
This adds a pre-pass to this optimization that scans through the basic
block and generates lists of mergeable instructions with one list per unique
address.
In the optimization phase instead of scanning through the basic block for mergeable
instructions, we now iterate over the lists generated by the pre-pass.
The decision to re-optimize a block is now made per list, so if we fail to merge any
instructions with the same address, then we do not attempt to optimize them in
future passes over the block. This will help to reduce the time this pass
spends re-optimizing instructions.
In one pathological test case, this change reduces the time spent in the
SILoadStoreOptimizer from 0.2s to 0.03s.
This restructuring will also make it possible to implement further solutions in
this pass, because we can now add less expensive checks to the pre-pass and
filter instructions out early which will avoid the need to do the expensive
scanning during the optimization pass. For example, checking for adjacent
offsets is an inexpensive test we can move to the pre-pass.
Reviewers: arsenm, pendingchaos, rampitec, nhaehnle, vpykhtin
Subscribers: kzhuravl, jvesely, wdng, yaxunl, dstuttard, tpr, t-tye, hiraditya, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D65961
llvm-svn: 373630
Summary:
Extend cachepolicy operand in the new VMEM buffer intrinsics
to supply information whether the buffer data is swizzled.
Also, propagate this information to MIR.
Intrinsics updated:
int_amdgcn_raw_buffer_load
int_amdgcn_raw_buffer_load_format
int_amdgcn_raw_buffer_store
int_amdgcn_raw_buffer_store_format
int_amdgcn_raw_tbuffer_load
int_amdgcn_raw_tbuffer_store
int_amdgcn_struct_buffer_load
int_amdgcn_struct_buffer_load_format
int_amdgcn_struct_buffer_store
int_amdgcn_struct_buffer_store_format
int_amdgcn_struct_tbuffer_load
int_amdgcn_struct_tbuffer_store
Furthermore, disable merging of VMEM buffer instructions
in SI Load/Store optimizer, if the "swizzled" bit on the instruction
is on.
The default value of the bit is 0, meaning that data in buffer
is linear and buffer instructions can be merged.
There is no difference in the generated code with this commit.
However, in the future it will be expected that front-ends
use buffer intrinsics with correct "swizzled" bit set.
Reviewers: arsenm, nhaehnle, tpr
Reviewed By: nhaehnle
Subscribers: arsenm, kzhuravl, jvesely, wdng, nhaehnle, yaxunl, dstuttard, tpr, t-tye, arphaman, jfb, Petar.Avramovic, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D68200
llvm-svn: 373491
Summary:
This is a refactoring that will make future improvements to this pass easier.
This change should not change the behavior of the pass.
Reviewers: arsenm, pendingchaos, rampitec, nhaehnle, vpykhtin
Reviewed By: nhaehnle, vpykhtin
Subscribers: kzhuravl, jvesely, wdng, yaxunl, dstuttard, tpr, t-tye, hiraditya, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D65496
llvm-svn: 373366
Currently the searchable tables report the number of dwords. These
round to the same number for 3 and 4 component d16
instructions. Change this to report the number of elements so this
isn't ambiguous.
llvm-svn: 369202
Summary:
This clang-tidy check is looking for unsigned integer variables whose initializer
starts with an implicit cast from llvm::Register and changes the type of the
variable to llvm::Register (dropping the llvm:: where possible).
Partial reverts in:
X86FrameLowering.cpp - Some functions return unsigned and arguably should be MCRegister
X86FixupLEAs.cpp - Some functions return unsigned and arguably should be MCRegister
X86FrameLowering.cpp - Some functions return unsigned and arguably should be MCRegister
HexagonBitSimplify.cpp - Function takes BitTracker::RegisterRef which appears to be unsigned&
MachineVerifier.cpp - Ambiguous operator==() given MCRegister and const Register
PPCFastISel.cpp - No Register::operator-=()
PeepholeOptimizer.cpp - TargetInstrInfo::optimizeLoadInstr() takes an unsigned&
MachineTraceMetrics.cpp - MachineTraceMetrics lacks a suitable constructor
Manual fixups in:
ARMFastISel.cpp - ARMEmitLoad() now takes a Register& instead of unsigned&
HexagonSplitDouble.cpp - Ternary operator was ambiguous between unsigned/Register
HexagonConstExtenders.cpp - Has a local class named Register, used llvm::Register instead of Register.
PPCFastISel.cpp - PPCEmitLoad() now takes a Register& instead of unsigned&
Depends on D65919
Reviewers: arsenm, bogner, craig.topper, RKSimon
Reviewed By: arsenm
Subscribers: RKSimon, craig.topper, lenary, aemerson, wuzish, jholewinski, MatzeB, qcolombet, dschuff, jyknight, dylanmckay, sdardis, nemanjai, jvesely, wdng, nhaehnle, sbc100, jgravelle-google, kristof.beyls, hiraditya, aheejin, kbarton, fedor.sergeev, javed.absar, asb, rbar, johnrusso, simoncook, apazos, sabuasal, niosHD, jrtc27, MaskRay, zzheng, edward-jones, atanasyan, rogfer01, MartinMosbeck, brucehoult, the_o, tpr, PkmX, jocewei, jsji, Petar.Avramovic, asbirlea, Jim, s.egerton, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D65962
llvm-svn: 369041
Summary:
This is a follow up to r367237. MachineFunction::getMachineMemOperand()
adds the offset parameter to the existing offset instead of resetting it.
So we need to reset the offset to the correct value after calling this
function.
Reviewers: arsenm
Subscribers: kzhuravl, jvesely, wdng, nhaehnle, yaxunl, dstuttard, tpr, t-tye, hiraditya, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D65557
llvm-svn: 367881
Summary:
The LoadStoreOptimizer was creating instructions with 2
MachineMemOperands, which meant they were assumed to alias with all other instructions,
because MachineInstr:mayAlias() returns true when an instruction has multiple
MachineMemOperands.
This was preventing these instructions from being merged again, and was
giving the scheduler less freedom to reorder them.
Reviewers: arsenm, nhaehnle
Reviewed By: arsenm
Subscribers: kzhuravl, jvesely, wdng, yaxunl, dstuttard, tpr, t-tye, hiraditya, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D65036
llvm-svn: 367237
Summary:
In order to combine memory operations efficiently, the load/store
optimizer might move some instructions around. It's usually safe
to move instructions down past the merged instruction because the
pass checks if memory operations can be re-ordered.
Though, the current logic doesn't handle Write-after-Write hazards.
This fixes a reflection issue with Monster Hunter World and DXVK.
v2: - rebased on top of master
- clean up the test case
- handle WaW hazards correctly
Bugzilla: https://bugs.llvm.org/show_bug.cgi?id=40130
Original patch by Samuel Pitoiset.
Reviewers: tpr, arsenm, nhaehnle
Reviewed By: nhaehnle
Subscribers: ronlieb, arsenm, kzhuravl, jvesely, wdng, nhaehnle, yaxunl, dstuttard, tpr, t-tye
Differential Revision: https://reviews.llvm.org/D61313
llvm-svn: 361008
Allow the clamp modifier on vop3 int arithmetic instructions in assembly
and disassembly.
This involved adding a clamp operand to the affected instructions in MIR
and MC, and thus having to fix up several places in codegen and MIR
tests.
Differential Revision: https://reviews.llvm.org/D59267
Change-Id: Ic7775105f02a985b668fa658a0cd7837846a534e
llvm-svn: 356399
Summary:
This is to fix a memory dependence bug in LoadStoreOptimizer.
Reviewers:
arsenm, rampitec
Differential Revision:
https://reviews.llvm.org/D58295
llvm-svn: 354295
to reflect the new license.
We understand that people may be surprised that we're moving the header
entirely to discuss the new license. We checked this carefully with the
Foundation's lawyer and we believe this is the correct approach.
Essentially, all code in the project is now made available by the LLVM
project under our new license, so you will see that the license headers
include that license only. Some of our contributors have contributed
code under our old license, and accordingly, we have retained a copy of
our old license notice in the top-level files in each project and
repository.
llvm-svn: 351636
This commit fixes the dwordx3/southern-islands failures that were found
in bugzilla https://bugs.llvm.org/show_bug.cgi?id=40129, by not
generating the dwordx3 variants of load/store instructions that were
added to the ISA after southern islands.
Differential Revision: https://reviews.llvm.org/D56434
llvm-svn: 350838
Summary: 32bit operand sizes are guaranteed by the opcode check AMDGPU::V_ADD_I32_e64 and
AMDGPU::V_ADDC_U32_e64. Therefore, we don't any additional operand size-check-assert.
Author: FarhanaAleen
llvm-svn: 349529
Using regular abs() causes the following warning
error: absolute value function 'abs' given an argument of type 'int64_t' (aka 'long') but has parameter of type 'int' which may cause truncation of value [-Werror,-Wabsolute-value]
(uint32_t)abs(Dist) > MaxDist) {
^
lib/Target/AMDGPU/SILoadStoreOptimizer.cpp:1369:19: note: use function 'std::abs' instead
which causes a bot to fail:
http://lab.llvm.org:8011/builders/sanitizer-x86_64-linux/builds/18284/steps/bootstrap%20clang/logs/stdio
llvm-svn: 349224
I've extended the load/store optimizer to be able to produce dwordx3
loads and stores, This change allows many more load/stores to be combined,
and results in much more optimal code for our hardware.
Differential Revision: https://reviews.llvm.org/D54042
llvm-svn: 348937
Stanislav Mekhanoshin