This switches to using DSE + MemorySSA by default again, after
fixing the issues reported after the first commit.
Notable fixes fc82006331, a0017c2bc2.
This reverts commit 3a59628f3c.
The tests have been updated and I plan to move them from the MSSA
directory up.
Some end-to-end tests needed small adjustments. One difference to the
legacy DSE is that legacy DSE also deletes trivially dead instructions
that are unrelated to memory operations. Because MemorySSA-backed DSE
just walks the MemorySSA, we only visit/check memory instructions. But
removing unrelated dead instructions is not really DSE's job and other
passes will clean up.
One noteworthy change is in llvm/test/Transforms/Coroutines/ArgAddr.ll,
but I think this comes down to legacy DSE not handling instructions that
may throw correctly in that case. To cover this with MemorySSA-backed
DSE, we need an update to llvm.coro.begin to treat it's return value to
belong to the same underlying object as the passed pointer.
There are some minor cases MemorySSA-backed DSE currently misses, e.g. related
to atomic operations, but I think those can be implemented after the switch.
This has been discussed on llvm-dev:
http://lists.llvm.org/pipermail/llvm-dev/2020-August/144417.html
For the MultiSource/SPEC2000/SPEC2006 the number of eliminated stores
goes from ~17500 (legayc DSE) to ~26300 (MemorySSA-backed). More numbers
and details in the thread on llvm-dev.
Impact on CTMark:
```
Legacy Pass Manager
exec instrs size-text
O3 + 0.60% - 0.27%
ReleaseThinLTO + 1.00% - 0.42%
ReleaseLTO-g. + 0.77% - 0.33%
RelThinLTO (link only) + 0.87% - 0.42%
RelLO-g (link only) + 0.78% - 0.33%
```
http://llvm-compile-time-tracker.com/compare.php?from=3f22e96d95c71ded906c67067d75278efb0a2525&to=ae8be4642533ff03803967ee9d7017c0d73b0ee0&stat=instructions
```
New Pass Manager
exec instrs. size-text
O3 + 0.95% - 0.25%
ReleaseThinLTO + 1.34% - 0.41%
ReleaseLTO-g. + 1.71% - 0.35%
RelThinLTO (link only) + 0.96% - 0.41%
RelLO-g (link only) + 2.21% - 0.35%
```
http://195.201.131.214:8000/compare.php?from=3f22e96d95c71ded906c67067d75278efb0a2525&to=ae8be4642533ff03803967ee9d7017c0d73b0ee0&stat=instructions
Reviewed By: asbirlea, xbolva00, nikic
Differential Revision: https://reviews.llvm.org/D87163
Previously, we would ignore alloca alignment when building the frame
and just use the natural alignment of the allocated type. If an alloca
is over-aligned for its IR type, this could lead to a frame entry with
inadequate alignment for the downstream uses of the alloca.
Since highly-aligned fields also tend to produce poor layouts under a
naive layout algorithm, I've also switched coroutine frames to use the
new optimal struct layout algorithm.
In order to communicate the frame size and alignment to later passes,
I needed to set align+dereferenceable attributes on the frame-pointer
parameter of the resume function. This is clearly the right thing to
do, but the align attribute currently seems to result in assumptions
being added during inlining that the optimizer cannot easily remove.
Summary:
Depends on https://reviews.llvm.org/D71901.
The fifth in a series of patches that ports the LLVM coroutines passes
to the new pass manager infrastructure.
The first 4 patches allow users to run coroutine passes by invoking, for
example `opt -passes=coro-early`. However, most of LLVM's tests for
coroutines use an option, `opt -enable-coroutines`, which adds all 4
coroutine passes to the appropriate legacy pass manager extension points.
This patch does the same, but using the new pass manager: when
coroutine features are enabled and the new pass manager is being used,
this adds the new-pass-manager-compliant coroutine passes to the pass
builder's pipeline.
This allows us to run all coroutine tests using the new pass manager
(besides those that use the coroutine retcon ABI used by the Swift
compiler, which is not yet supported in the new pass manager).
Reviewers: GorNishanov, lewissbaker, chandlerc, junparser, wenlei
Subscribers: wenlei, EricWF, Prazek, hiraditya, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D71902
As it's causing some bot failures (and per request from kbarton).
This reverts commit r358543/ab70da07286e618016e78247e4a24fcb84077fda.
llvm-svn: 358546
Summary:
The purpose of coro.end intrinsic is to allow frontends to mark the cleanup and
other code that is only relevant during the initial invocation of the coroutine
and should not be present in resume and destroy parts.
In landing pads coro.end is replaced with an appropriate instruction to unwind to
caller. The handling of coro.end differs depending on whether the target is
using landingpad or WinEH exception model.
For landingpad based exception model, it is expected that frontend uses the
`coro.end`_ intrinsic as follows:
```
ehcleanup:
%InResumePart = call i1 @llvm.coro.end(i8* null, i1 true)
br i1 %InResumePart, label %eh.resume, label %cleanup.cont
cleanup.cont:
; rest of the cleanup
eh.resume:
%exn = load i8*, i8** %exn.slot, align 8
%sel = load i32, i32* %ehselector.slot, align 4
%lpad.val = insertvalue { i8*, i32 } undef, i8* %exn, 0
%lpad.val29 = insertvalue { i8*, i32 } %lpad.val, i32 %sel, 1
resume { i8*, i32 } %lpad.val29
```
The `CoroSpit` pass replaces `coro.end` with ``True`` in the resume functions,
thus leading to immediate unwind to the caller, whereas in start function it
is replaced with ``False``, thus allowing to proceed to the rest of the cleanup
code that is only needed during initial invocation of the coroutine.
For Windows Exception handling model, a frontend should attach a funclet bundle
referring to an enclosing cleanuppad as follows:
```
ehcleanup:
%tok = cleanuppad within none []
%unused = call i1 @llvm.coro.end(i8* null, i1 true) [ "funclet"(token %tok) ]
cleanupret from %tok unwind label %RestOfTheCleanup
```
The `CoroSplit` pass, if the funclet bundle is present, will insert
``cleanupret from %tok unwind to caller`` before
the `coro.end`_ intrinsic and will remove the rest of the block.
Reviewers: majnemer
Reviewed By: majnemer
Subscribers: llvm-commits, mehdi_amini
Differential Revision: https://reviews.llvm.org/D25543
llvm-svn: 297223
Summary:
Move early uses of spilled variables after CoroBegin.
For example, if a parameter had address taken, we may end up with the code
like:
define @f(i32 %n) {
%n.addr = alloca i32
store %n, %n.addr
...
call @coro.begin
This patch fixes the problem by moving uses of spilled variables after CoroBegin.
Reviewers: majnemer
Subscribers: mehdi_amini, llvm-commits
Differential Revision: https://reviews.llvm.org/D24234
llvm-svn: 280678
Florian Hahn