If a loop has no exiting blocks the region covering we use during
schedule genertion might not cover that loop properly. For now we bail
out as we would not optimize these loops anyway.
llvm-svn: 265280
If an exit PHI is written and also read in the SCoP we should not create two
SAI objects but only one. As the read is only modeled to ensure OpenMP code
generation knows about it we can simply use the EXIT_PHI MemoryKind for both
accesses.
llvm-svn: 265261
If a loop has no exiting blocks the region covering we use during
schedule genertion might not cover that loop properly. For now we bail
out as we would not optimize these loops anyway.
llvm-svn: 265260
These caused LNT failures due to new assertions when running with
-polly-position=before-vectorizer -polly-process-unprofitable for:
FAIL: clamscan.compile_time
FAIL: cjpeg.compile_time
FAIL: consumer-jpeg.compile_time
FAIL: shapes.compile_time
FAIL: clamscan.execution_time
FAIL: cjpeg.execution_time
FAIL: consumer-jpeg.execution_time
FAIL: shapes.execution_time
The failures have been introduced by r264782, but r264789 had to be reverted
as it depended on the earlier patch.
llvm-svn: 264885
As a CFG is often structured we can simplify the steps performed
during domain generation. When we push domain information we can
utilize the information from a block A to build the domain of a
block B, if A dominates B. When we pull domain information we can
use information from a block A to build the domain of a block B
if B post-dominates A. This patch implements both ideas and thereby
simplifies domains that were not simplified by isl. For the FINAL
basic block in
test/ScopInfo/complex-successor-structure-3.ll .
we used to build a universe set with 81 basic sets. Now it actually is
represented as universe set.
While the initial idea to utilize the graph structure depended on the
dominator and post-dominator tree we can use the available region
information as a coarse grained replacement. To this end we push the
region entry domain to the region exit and pull it from the region
entry for the region exit.
Differential Revision: http://reviews.llvm.org/D18450
llvm-svn: 264789
Instead of waiting for the domain construction to finish we will now
bail as early as possible in case a complexity problem is encountered.
This might save compile time but more importantly it makes the "abort"
explicit. While we can always check if we invalidated the assumed
context we can simply propagate the result of the construction back.
This also removes the HasComplexCFG flag that was used for the very
same reason.
Differential Revision: http://reviews.llvm.org/D18504
llvm-svn: 264775
This patch applies the restrictions on the number of domain conjuncts
also to the domain parts of piecewise affine expressions we generate.
To this end the wording is change slightly. It was needed to support
complex additions featuring zext-instructions but it also fixes PR27045.
lnt profitable runs reports only little changes that might be noise:
Compile Time:
Polybench/[...]/2mm +4.34%
SingleSource/[...]/stepanov_container -2.43%
Execution Time:
External/[...]/186_crafty -2.32%
External/[...]/188_ammp -1.89%
External/[...]/473_astar -1.87%
llvm-svn: 264514
This fixes PR27035. While we now exclude MemIntrinsics from the
polyhedral model if they would access "null" we could exploit this
even more, e.g., remove all parameter combinations that would lead to
the execution of this statement from the context.
llvm-svn: 264284
Similar to r262612 we need to check not only the pointer SCEV and the
type of an alias group but also the actual access instruction. The
reason is again the same: The pointer SCEV is not flow sensitive but the
access function is. In r262612 we avoided consolidating alias groups
even though the pointer SCEV and the type were the same but the access
function was not. Here it is simpler as we can simply check all members
of an alias group against the given access instruction.
llvm-svn: 264274
ISL can conclude additional conditions on parameters from restrictions
on loop variables. Such conditions persist when leaving the loop and the
loop variable is projected out. This results in a narrower domain for
exiting the loop than entering it and is logically impossible for
non-infinite loops.
We fix this by not adding a lower bound i>=0 when constructing BB
domains, but defer it to when also the upper bound it computed, which
was done redundantly even before this patch.
This reduces the number of LNT fails with -polly-process-unprofitable
-polly-position=before-vectorizer from 8 to 6.
llvm-svn: 264118
We bail out if current scop has a complex control flow as this could lead to
building of large domain conditions. This is to reduce compile time. This
addresses r26382.
Contributed-by: Chris Jenneisch <chrisj@codeaurora.org>
Differential Revision: http://reviews.llvm.org/D18362
llvm-svn: 264105
Affine branches are fully modeled and regenerated from the polyhedral domain and
consequently do not require any input conditions to be propagated.
llvm-svn: 263678
The scope will be required in the following fix. This commit separates
the large changes that do not change behaviour from the small, but
functional change.
llvm-svn: 262664
This should fix PR19422.
Thanks to Jeremy Huddleston Sequoia for reporting this.
Thanks to Roman Gareev for his investigation and the reduced test case.
llvm-svn: 262612
Polly recognizes affine loops that ScalarEvolution does not, in
particular those with loop conditions that depend on hoisted invariant
loads. Check for SCEVAddRec dependencies on such loops and do not
consider their exit values as synthesizable because SCEVExpander would
generate them as expressions that depend on the original induction
variables. These are not available in generated code.
llvm-svn: 262404
In order to speed up compile time and to avoid random timeouts we now
separately track assumptions and restrictions. In this context
assumptions describe parameter valuations we need and restrictions
describe parameter valuations we do not allow. During AST generation
we create a runtime check for both, whereas the one for the
restrictions is negated before a conjunction is build.
Except the In-Bounds assumptions we currently only track restrictions.
Differential Revision: http://reviews.llvm.org/D17247
llvm-svn: 262328
We move verifyInvariantLoads out of this function to allow for an early return
without the need for code duplication. A similar transformation was suggested
by Johannes Doerfert in post commit review of r262033.
llvm-svn: 262203
This debug output distracts from the -debug-only=polly-scops output. As it is
rather verbose and only really needed for debugging the domain construction
I drop this output. The domain construction is meanwhile stable enough to
not require regular debugging.
llvm-svn: 262117
The functions buildAccessMultiDimFixed and buildAccessMultiDimParam were
refactored from buildMemoryAccess. In their own functions, the control
flow can be shortcut and simplified using returns.
Suggested-by: etherzhhb
llvm-svn: 262029
Check the ModRefBehaviour of functions in order to decide whether or
not a call instruction might be acceptable.
Differential Revision: http://reviews.llvm.org/D5227
llvm-svn: 261866
From now on we bail only if a non-trivial alias group contains a non-affine
access, not when we discover aliasing and non-affine accesses are allowed.
llvm-svn: 261863
Replace Scop::getStmtForBasicBlock and Scop::getStmtForRegionNode, and
add overloads for llvm::Instruction and llvm::RegionNode.
getStmtFor and overloads become the common interface to get the Stmt
that contains something. Named after LoopInfo::getLoopFor and
RegionInfo::getRegionFor.
llvm-svn: 261791
This patch adds support for memcpy, memset and memmove intrinsics. They are
represented as one (memset) or two (memcpy, memmove) memory accesses in the
polyhedral model. These accesses have an access range that describes the
summarized effect of the intrinsic, i.e.,
memset(&A[i], '$', N);
is represented as a write access from A[i] to A[i+N].
Differential Revision: http://reviews.llvm.org/D5226
llvm-svn: 261489
To support non-aligned accesses we introduce a virtual element size
for arrays that divides each access function used for this array. The
adjustment of the access function based on the element size of the
array was therefore moved after this virtual element size was
determined, thus after all accesses have been created.
Differential Revision: http://reviews.llvm.org/D17246
llvm-svn: 261226
After we moved isl_ctx into Scop, we need to free the isl_ctx after
freeing all isl objects, which requires the ScopInfo pass to be freed
at last. But this is not guaranteed by the PassManager, and we need
extra code to free the isl_ctx at the right time.
We introduced a shared pointer to manage the isl_ctx, and distribute
it to all analyses that create isl objects. As such, whenever we free
an analyses with the shared_ptr (and also free the isl objects which
are created by the analyses), we decrease the (shared) reference
counter of the shared_ptr by 1. Whenever the reference counter reach
0 in the releaseMemory function of an analysis, that analysis will
be the last one that hold any isl objects, and we can safely free the
isl_ctx with that analysis.
Differential Revision: http://reviews.llvm.org/D17241
llvm-svn: 261100
A load can only be invariant if its base pointer is invariant too. To
this end, we check if the base pointer is defined inside the region or
outside. In the former case we recursively check if we can (and
therefore will) hoist the base pointer too. Only if that happends we
can hoist the load.
llvm-svn: 260886
This reverts commit 98efa006c96ac981c00d2e386ec1102bce9f549a.
The fix was broken since we do not use AA in the ScopDetection anymore to
check for invariant accesses.
llvm-svn: 260884
Eliminate the global variable "InsnToMemAcc" to make Scop/ScopInfo become
more protable, such that we can safely use them in a CallGraphSCC pass.
Differential Revision: http://reviews.llvm.org/D17238
llvm-svn: 260863
Before this patch it could happen that we did not hoist a load that
was a base pointer of another load even though AA already declared the
first one as invariant (during ScopDetection). If this case arises we
will now skipt the "can be overwriten" check because in this case the
over-approximating nature causes us to generate broken code.
llvm-svn: 260862
The former ScopArrayInfo::updateSizes was implicitly divided into an
updateElementType and an updateSizes. Now this partitioning is
explicit.
llvm-svn: 260860
Since the origin AccFuncMap in ScopInfo is used by the underlying Scop
only, and it must stay alive until we delete the Scop. It will be better
if we simply move the origin AccFuncMap in ScopInfo into the Scop class.
llvm-svn: 260820
Make Scop become more portable such that we can use it in a CallGraphSCC pass.
The first step is to drop the analyses that are only used during Scop construction.
This patch drop LoopInfo from Scop.
llvm-svn: 260819
Make Scop become more portable such that we can use it in a CallGraphSCC pass.
The first step is to drop the analyses that are only used during Scop construction.
This patch drop DominatorTree from Scop.
llvm-svn: 260818
Make Scop become more portable such that we can use it in a CallGraphSCC pass.
The first step is to drop the analyses that are only used during Scop construction.
This patch drop ScopDecection from Scop.
llvm-svn: 260817
We now distinguish invariant loads to the same memory location if they
have different types. This will cause us to pre-load an invariant
location once for each type that is used to access it. However, we can
thereby avoid invalid casting, especially if an array is accessed
though different typed/sized invariant loads.
This basically reverts the changes in r260023 but keeps the test
cases.
llvm-svn: 260045
Invariant load hoisting of memory accesses with non-canonical element
types lacks support for equivalence classes that contain elements of
different width/size. This support should be added, but to get our buildbots
back to green, we disable load hoisting for memory accesses with non-canonical
element size for now.
llvm-svn: 260023
The previously implemented approach is to follow value definitions and
create write accesses ("push defs") while searching for uses. This
requires the same relatively validity- and requirement conditions to be
replicated at multiple locations (PHI instructions, other instructions,
uses by PHIs).
We replace this by iterating over the uses in a SCoP ("pull in
requirements"), and add writes only when at least one read has been
added. It turns out to be simpler code because each use is only iterated
over once and writes are added for the first access that reads it. We
need another iteration to identify escaping values (uses not in the
SCoP), which also makes the difference between such accesses more
obvious. As a side-effect, the order of scalar MemoryAccess can change.
Differential Revision: http://reviews.llvm.org/D15706
llvm-svn: 259987
This allows code such as:
void multiple_types(char *Short, char *Float, char *Double) {
for (long i = 0; i < 100; i++) {
Short[i] = *(short *)&Short[2 * i];
Float[i] = *(float *)&Float[4 * i];
Double[i] = *(double *)&Double[8 * i];
}
}
To model such code we use as canonical element type of the modeled array the
smallest element type of all original array accesses, if type allocation sizes
are multiples of each other. Otherwise, we use a newly created iN type, where N
is the gcd of the allocation size of the types used in the accesses to this
array. Accesses with types larger as the canonical element type are modeled as
multiple accesses with the smaller type.
For example the second load access is modeled as:
{ Stmt_bb2[i0] -> MemRef_Float[o0] : 4i0 <= o0 <= 3 + 4i0 }
To support code-generating these memory accesses, we introduce a new method
getAccessAddressFunction that assigns each statement instance a single memory
location, the address we load from/store to. Currently we obtain this address by
taking the lexmin of the access function. We may consider keeping track of the
memory location more explicitly in the future.
We currently do _not_ handle multi-dimensional arrays and also keep the
restriction of not supporting accesses where the offset expression is not a
multiple of the access element type size. This patch adds tests that ensure
we correctly invalidate a scop in case these accesses are found. Both types of
accesses can be handled using the very same model, but are left to be added in
the future.
We also move the initialization of the scop-context into the constructor to
ensure it is already available when invalidating the scop.
Finally, we add this as a new item to the 2.9 release notes
Reviewers: jdoerfert, Meinersbur
Differential Revision: http://reviews.llvm.org/D16878
llvm-svn: 259784
We support now code such as:
void multiple_types(char *Short, char *Float, char *Double) {
for (long i = 0; i < 100; i++) {
Short[i] = *(short *)&Short[2 * i];
Float[i] = *(float *)&Float[4 * i];
Double[i] = *(double *)&Double[8 * i];
}
}
To support such code we use as element type of the modeled array the smallest
element type of all original array accesses. Accesses with larger types are
modeled as multiple accesses with the smaller type.
For example the second load access is modeled as:
{ Stmt_bb2[i0] -> MemRef_Float[o0] : 4i0 <= o0 <= 3 + 4i0 }
To support jscop-rewritable memory accesses we need each statement instance to
only be assigned a single memory location, which will be the address at which
we load the value. Currently we obtain this address by taking the lexmin of
the access function. We may consider keeping track of the memory location more
explicitly in the future.
llvm-svn: 259587
We create separate functions for fixed-size multi-dimensional, parameteric-sized
multi-dimensional, as well as single-dimensional memory accesses to reduce the
complexity of a large monolithic function.
Suggested-by: Michael Kruse <llvm@meinersbur.de>
llvm-svn: 259522
There is no need to pass the size of the elements as the last size dimension
to ScopArrayInfo. This information is already available through the ElementType.
Tracking it twice is not only redundant but may result in inconsistencies.
llvm-svn: 259521
For schedule generation we assumed that the reverse post order traversal used by
the domain generation is sufficient, however it is not. Once a loop is
discovered, we have to completely traverse it, before we can generate the
schedule for any block/region that is only reachable through a loop exiting
block.
To this end, we add a "loop stack" that will keep track of loops we
discovered during the traversal but have not yet traversed completely.
We will never visit a basic block (or region) outside the most recent
(thus smallest) loop in the loop stack but instead queue such blocks
(or regions) in a waiting list. If the waiting list is not empty and
(might) contain blocks from the most recent loop in the loop stack the
next block/region to visit is drawn from there, otherwise from the
reverse post order iterator.
We exploit the new property of loops being always completed before additional
loops are processed, by removing the LoopSchedules map and instead keep all
information in LoopStack. This clarifies that we indeed always only keep a
stack of in-process loops, but will never keep incomplete schedules for an
arbitrary set of loops. As a result, we can simplify some of the existing code.
This patch also adds some more documentation about how our schedule construction
works.
This fixes http://llvm.org/PR25879
This patch is an modified version of Johannes Doerfert's initial fix.
Differential Revision: http://reviews.llvm.org/D15679
llvm-svn: 259354
In https://llvm.org/svn/llvm-project/polly/trunk@251870 code was committed to
avoid a failure in the presence of infinite loops, but the test case committed
along with this change passes without the actual change. I looked back into the
code and also checked with the original committer (Johannes), but could not find
the reason why the code is needed. The introduction of LoopStacks for
buildSchedule in one of the next commits will make it even more clear that this
code is not needed, but I remove this ahead of time to facilitate bisecting in
case I missed something.
llvm-svn: 259347
Before adding a MK_Value READ MemoryAccess, check whether the read is
necessary or synthesizable. Synthesizable values are later generated by
the SCEVExpander and therefore do not need to be transferred
explicitly. This can happen because the check for synthesizability has
presumbly been forgotten in the case where a phi's incoming value has
been defined in a different statement.
Differential Revision: http://reviews.llvm.org/D15687
llvm-svn: 258998
MemAccInst wraps the common members of LoadInst and StoreInst. Also use
of this class in:
- ScopInfo::buildMemoryAccess
- BlockGenerator::generateLocationAccessed
- ScopInfo::addArrayAccess
- Scop::buildAliasGroups
- Replace every use of polly::getPointerOperand
Reviewers: jdoerfert, grosser
Differential Revision: http://reviews.llvm.org/D16530
llvm-svn: 258947
Ensure that there is at most one phi write access per PHINode and
ScopStmt. In particular, this would be possible for non-affine
subregions with multiple exiting blocks. We replace multiple MAY_WRITE
accesses by one MUST_WRITE access. The written value is constructed
using a PHINode of all exiting blocks. The interpretation of the PHI
WRITE's "accessed value" changed from the incoming value to the PHI like
for PHI READs since there is no unique incoming value.
Because region simplification shuffles around PHI nodes -- particularly
with exit node PHIs -- the PHINodes at analysis time does not always
exist anymore in the code generation pass. We instead remember the
incoming block/value pair in the MemoryAccess.
Differential Revision: http://reviews.llvm.org/D15681
llvm-svn: 258809
Keep at most one value read MemoryAccess per value and statement;
multiple generated loads do not have any additional effect. As one such
MemoryAccess can cater multiple uses within the statement, the
AccessInstruction property is not unique any more and set to nullptr.
Differential Revision: http://reviews.llvm.org/D15510
llvm-svn: 258808
Ensure there is at most one write access per definition of an
llvm::Value. Keep track of already created value write access by using
a (dense) map.
Replace addValueWriteAccess by ensureValueStore which can be uses more
liberally without worrying to add redundant accesses. It will be used,
e.g. in a logical correspondant for value reads -- ensureValueReload --
to ensure that the expected definition has been written when loading it.
Differential Revision: http://reviews.llvm.org/D15483
llvm-svn: 258807
Call assumeNoOutOfBound only in updateDimensionality to process situations
when new dimensions are added and new bounds checks are required.
Contributed-by: Tobias Grosser, Gareev Roman
llvm-svn: 257170
This change clarifies that for Not-NonAffine-SubRegions we actually iterate over
the subnodes and for both NonAffine-SubRegions and BasicBlocks, we perform the
schedule construction. As a result, the tree traversal becomes trivial, the
special case for a scop consisting just of a single non-affine region
disappears and the indentation of the code is reduced.
No functional change intended.
llvm-svn: 256940
At code generation, scalar reads are generated before the other
statement's instructions, respectively scalar writes after them, in
contrast to array accesses which are "executed" with the instructions
they are linked to. Therefore it makes sense to not map the scalar
accesses to a place of execution. Follow-up patches will also remove
some of the directs links from a scalar access to a single instruction,
such that only having array accesses in InstructionToAccess ensures
consistency.
Differential Revision: http://reviews.llvm.org/D13676
llvm-svn: 256298
We clarify that certain code is only executed if LSchedule is != nullptr.
Previously some of these functions have been executed, but they only passed
a nullptr through. This caused some confusion when reading the code.
llvm-svn: 256209
Besides improving the documentation and the code we now assert in case the input
is invalid (N < 0) and also do not any more return a nullptr in case USet is
empty. This should make the code more readable.
llvm-svn: 256208
Instead of counting all array memory accesses associated with a load
instruction, we now explicitly check that the single array access that could
(potentially) be associated with a load instruction does not exist. This helps
to document the current behavior of Polly where load instructions can indeed
have at most one associated array access. In the unlikely case this changes
in the future, we add an assert for the case where two load accesses would
prevent us to return a single memory access, but we still should communicate
that not all array memory accesses have been removed.
This addresses post-commit comments from Johannes Doerfert for commit 255776.
llvm-svn: 256136
Scops that contain many complex branches are likely to result in complex domain
conditions that consist of a large (> 100) number of conjucts. Transforming
such domains is expensive and unlikely to result in efficient code. To avoid
long compile times we detect this case and skip such scops. In the future we may
improve this by either using non-affine subregions to hide such complex
condition structures or by exploiting in certain cases properties (e.g.,
dominance) that allow us to construct the domains of a scop in a way that
results in a smaller number improving conjuncts.
Example of a code that results in complex iteration spaces:
loop.header
/ | \ \
A0 A2 A4 \
\ / \ / \
A1 A3 \
/ \ / \ |
B0 B2 B4 |
\ / \ / |
B1 B3 ^
/ \ / \ |
C0 C2 C4 |
\ / \ / /
C1 C3 /
\ / /
loop backedge
llvm-svn: 256123
Load instructions may possibly be related to multiple memory accesses, but we
are only interested in the array read access that describes the memory location
the load instructions loads from. By using getArrayAccessfor we ensure to always
obtain the right memory access.
This issue was found by inspection without having a failing test case.
llvm-svn: 255716
This reverts commit r255471.
Johannes raised in the post-commit review of r255471 the concern that PHI
writes in non-affine regions with two exiting blocks are not really MUST_WRITE,
but we just know that at least one out of the set of all possible PHI writes
will be executed. Modeling all PHI nodes as MUST_WRITEs is probably save, but
adding the needed documentation for such a special case is probably not worth
the effort. Michael will be proposing a new patch that ensures only a single
PHI_WRITE is created for non-affine regions, which - besides other benefits -
should also allow us to use a single well-defined MUST_WRITE for such PHI
writes.
(This is not a full revert, but the condition and documentation have been
slightly extended)
llvm-svn: 255503
Before this commit, only the region's entry block was assumed to always
execute in a non-affine subregion. We replace this by a test whether it
dominates the exit block (this necessarily includes the entry block)
which should be more accurate.
llvm-svn: 255473
LLVM's IR guarantees that a value definition occurs before any use, and
also the value of a PHI must be one of the incoming values, "written"
in one of the incoming blocks. Hence, such writes are never conditional
in the context of a non-affine subregion.
llvm-svn: 255471
Johannes Doerfert