Summary:
Avoid that loop vectorizer creates loads/stores of vectors
with "irregular" types when interleaving. An example of
an irregular type is x86_fp80 that is 80 bits, but that
may have an allocation size that is 96 bits. So an array
of x86_fp80 is not bitcast compatible with a vector
of the same type.
Not sure if interleavedAccessCanBeWidened is the best
place for this check, but it solves the problem seen
in the added test case. And it is the same kind of check
that already exists in memoryInstructionCanBeWidened.
Reviewers: fhahn, Ayal, craig.topper
Reviewed By: fhahn
Subscribers: hiraditya, rkruppe, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D63386
llvm-svn: 363547
This patch tests the forward-referencing added in D62995 by changing
some existing intrinsics to use forward referencing of overloadable
parameters, rather than backward referencing.
This patch changes the TableGen definition/implementation of
llvm.aarch64.neon.ld2lane and llvm.aarch64.neon.ld2lane intrinsics
(and similar for ld3 and ld4). This change is intended to be
non-functional, since the behaviour of the intrinsics is
expected to be the same.
Reviewers: arsenm, dmgreen, RKSimon, greened, rnk
Reviewed By: RKSimon
Differential Revision: https://reviews.llvm.org/D63189
llvm-svn: 363546
Some GEPs were not being split, presumably because that split would just be
undone by the DAGCombiner. Not performing those splits can prevent important
optimizations, such as preventing the element indices / member offsets from
being (partially) folded into load/store instruction immediates. This patch:
- Makes the splits also occur in the cases where the base address and the GEP
are in the same BB.
- Ensures that the DAGCombiner doesn't reassociate them back again.
Differential Revision: https://reviews.llvm.org/D60294
llvm-svn: 363544
This is already done in DAGCombiner::visitINSERT_SUBVECTOR, but this helps a number of shuffles across different vector widths recognise when they come from the same source.
llvm-svn: 363542
Second functional change following on from rL362687. Pass the
NoWrapFlags from the MulExpr to InsertBinop when we're generating a
shl or mul.
Differential Revision: https://reviews.llvm.org/D61934
llvm-svn: 363540
This patch changes MIR stack-id from an integer to an enum,
and adds printing/parsing support for this in MIR files. The default
stack-id '0' is now renamed to 'default'.
This should make MIR tests that have stack objects with different stack-ids
more descriptive. It also clarifies code operating on StackID.
Reviewers: arsenm, thegameg, qcolombet
Reviewed By: arsenm
Differential Revision: https://reviews.llvm.org/D60137
llvm-svn: 363533
Third time's the charm.
This was reverted in r363220 due to being suspected of an internal benchmark
regression and a test failure, none of which turned out to be caused by this.
llvm-svn: 363529
SimplifyCFG has a bug that results in inconsistent prof branch_weights metadata
if unreachable switch cases are removed. This patch fixes this bug by making use
of the newly introduced SwitchInstProfUpdateWrapper class (see patch D62122).
A new test is created.
Differential Revision: https://reviews.llvm.org/D62186
llvm-svn: 363527
Summary:
SPE passes doubles the same as soft-float, in register pairs as i32
types. This is all handled by the target-independent layer. However,
this is not optimal when splitting or reforming the doubles, as it
pushes to the stack and loads from, on either side.
For instance, to pass a double argument to a function, assuming the
double value is in r5, the sequence currently looks like this:
evstdd 5, X(1)
lwz 3, X(1)
lwz 4, X+4(1)
Likewise, to form a double into r5 from args in r3 and r4:
stw 3, X(1)
stw 4, X+4(1)
evldd 5, X(1)
This optimizes the fence to use SPE instructions. Now, to pass a double
to a function:
mr 4, 5
evmergehi 3, 5, 5
And to form a double into r5 from args in r3 and r4:
evmergelo 5, 3, 4
This is comparable to the way that gcc generates the double splits.
This also fixes a bug with expanding builtins to libcalls, where the
LowerCallTo() code path was generating intermediate illegal type nodes.
Reviewers: nemanjai, hfinkel, joerg
Subscribers: kbarton, jfb, jsji, llvm-commits
Differential Revision: https://reviews.llvm.org/D54583
llvm-svn: 363526
Summary:
Currently, MachOWriter::writeSectionData writes dummy data (0xdeadbeef) to fill section data areas in the file even if the section is a virtual one. Since virtual sections don't occupy any space in the file, writing dummy data could results the "OS.tell() - fileStart <= Sec.offset" assertion failure.
This patch fixes the bug by simply not writing any dummy data for virtual sections.
Reviewers: beanz, jhenderson, rupprecht, alexshap
Reviewed By: alexshap
Subscribers: compnerd, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D62991
llvm-svn: 363525
Summary:
The "sparc"/"sparcel" architectures appears in ArchMap (used by -B option) but not in OutputFormatMap (used by -I/-O option). Add their targets into OutputFormatMap for consistency.
Note that AFAIK there're no targets for 32-bit little-endian SPARC ("elf32-sparcel") in GNU binutils.
Reviewers: espindola, alexshap, rupprecht, jhenderson, compnerd, jakehehrlich
Reviewed By: jhenderson, compnerd, jakehehrlich
Subscribers: jyknight, emaste, arichardson, fedor.sergeev, jakehehrlich, MaskRay, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D63238
llvm-svn: 363524
Fix folds of addo and subo with an undef operand to be:
`@llvm.{u,s}{add,sub}.with.overflow` all fold to `{ undef, false }`,
as per LLVM undef rules.
Same for commuted variants.
Based on the original version of the patch by @nikic.
Fixes [[ https://bugs.llvm.org/show_bug.cgi?id=42209 | PR42209 ]]
Differential Revision: https://reviews.llvm.org/D63065
llvm-svn: 363522
Summary:
Instead of encoding a high-word of 0 using a fake TargetGlobalAddress,
just use a literal target constant. This simplifies some subsequent changes.
The generated assembly is now more explicit about the kind of relocation
that is to be used.
Change-Id: I066835202d23b5941fa7a358eb4b89e9b71ab6f8
Reviewers: arsenm, rampitec
Subscribers: kzhuravl, jvesely, wdng, yaxunl, dstuttard, tpr, t-tye, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D61491
llvm-svn: 363516
This is based on the example/discussion in PR37428:
https://bugs.llvm.org/show_bug.cgi?id=37428
Proper vector shift instructions don't appear until AVX2, so we may generate several
extra instructions within a loop trying to compensate for that. It's difficult to
recover from that shift expansion later than this, so use the existing TLI hook and
splat analysis to enable better codegen.
This extends CGP functionality introduced with:
rL201655
Differential Revision: https://reviews.llvm.org/D63233
llvm-svn: 363511
This is similar logic/motivation to the select splitting in D62969.
In D63233, the pattern changes so that we no longer have an extract_subvector of vselect,
but the operands of the select are still being concatenated.
The closest case is represented in either the first or last test diffs here - we have an
extra instruction, but we converted 3-4 ymm instructions into 4-5 xmm instructions.
I think that's the right trade-off for most AVX1 targets.
In the example based on PR37428:
https://bugs.llvm.org/show_bug.cgi?id=37428
...this makes the loop about 30% faster (tested on Haswell by compiling with -mavx).
Differential Revision: https://reviews.llvm.org/D63364
llvm-svn: 363508
Summary:
If the nested loop is an innermost loop, prefer to a 32-byte alignment, so that
we can decrease cache misses and branch-prediction misses. Actual alignment of
the loop will depend on the hotness check and other logic in alignBlocks.
The old code will only align hot loop to 32 bytes when the LoopSize larger than
16 bytes and smaller than 32 bytes, this patch will align the innermost hot loop
to 32 bytes not only for the hot loop whose size is 16~32 bytes.
Reviewed By: steven.zhang, jsji
Differential Revision: https://reviews.llvm.org/D61228
llvm-svn: 363495
Based on D59959, this switches SCEV to use unsigned/signed range
intersection based on the sign hint. This will prefer non-wrapping
ranges in the relevant domain. I've left the one intersection in
getRangeForAffineAR() to use the smallest intersection heuristic,
as there doesn't seem to be any obvious preference there.
Differential Revision: https://reviews.llvm.org/D60035
llvm-svn: 363490
If we can detect that saturating math that depends on an IV cannot
overflow, replace it with simple math. This is similar to the CVP
optimization from D62703, just based on a different underlying
analysis (SCEV vs LVI) that catches different cases.
Differential Revision: https://reviews.llvm.org/D62792
llvm-svn: 363489
This reverts rL363474. -debug-only=isel was added to some tests that
don't specify `REQUIRES: asserts`. This causes failures on
-DLLVM_ENABLE_ASSERTIONS=off builds.
I chose to revert instead of fixing the tests because I'm not sure
whether we should add `REQUIRES: asserts` to more tests.
llvm-svn: 363482
Current findBestLoopTop can find and move one kind of block to top, a latch block has one successor. Another common case is:
* a latch block
* it has two successors, one is loop header, another is exit
* it has more than one predecessors
If it is below one of its predecessors P, only P can fall through to it, all other predecessors need a jump to it, and another conditional jump to loop header. If it is moved before loop header, all its predecessors jump to it, then fall through to loop header. So all its predecessors except P can reduce one taken branch.
Differential Revision: https://reviews.llvm.org/D43256
llvm-svn: 363471
with 'objc_arc_inert'
Those calls are no-ops, so they can be safely deleted.
rdar://problem/49839633
Differential Revision: https://reviews.llvm.org/D62433
llvm-svn: 363468
Currently you get extra waits, because waits are inserted for the
register dependencies of the call, and the function prolog waits on
everything.
Currently waits are still inserted on returns. It may make sense to
not do this, and wait in the caller instead.
llvm-svn: 363465
There is a circular dependency between SROA and InferAddressSpaces
today that requires running both multiple times in order to be able to
eliminate all simple allocas and addrspacecasts. InferAddressSpaces
can't remove addrspacecasts when written to memory, and SROA helps
move pointers out of memory.
This should avoid inserting new commuting addrspacecasts with GEPs,
since there are unresolved questions about pointer wrapping between
different address spaces.
For now, don't replace volatile operations that don't match the alloca
addrspace, as it would change the address space of the access. It may
be still OK to insert an addrspacecast from the new alloca, but be
more conservative for now.
llvm-svn: 363462
The way SelectionDAG treats memory operands is very frustrating, and
by default drops them unless a property is set on the pattern. There
is no pattern for manually selected instructions, so this requires
manually setting them.
llvm-svn: 363455
This is a branch opcode that takes a jump table pointer, jump table index and an
index into the table to do an indirect branch.
We pass both the table pointer and JTI to allow targets like ARM64 to more
easily use the existing jump table compression optimization without having to
walk up the block to find a paired G_JUMP_TABLE.
Differential Revision: https://reviews.llvm.org/D63159
llvm-svn: 363434
I recently discovered a bug on the x86 platform: The fp80 type was not handled well by x86 for constrained floating point nodes, as their regular counterparts are replaced by extending loads and truncating stores during the preprocess phase. Normally, platforms don't have this issue, as they don't typically attempt to perform such legalizations during instruction selection preprocessing. Before this change, strict_fp nodes survived until they were mutated to normal nodes, which happened shortly after preprocessing on other platforms. This modification lowers these nodes at the same phase while properly utilizing the chain.5
Submitted by: Drew Wock <drew.wock@sas.com>
Reviewed by: Craig Topper, Kevin P. Neal
Approved by: Craig Topper
Differential Revision: https://reviews.llvm.org/D63271
llvm-svn: 363417
As suggested in the post-commit thread for rL363392 - it's
wasteful to have so many runs for larger tests. AVX1/AVX2
is what shows the diff and probably what matters most going
forward.
llvm-svn: 363411
Avoid producing illegal register bank copies for reg_sequence and
phi. The default implementation assumes it is possible to pick any
operand's bank and use that for the result, introducing a copy for
operands with a different bank. This does not check for illegal
copies. It is not legal to introduce a VGPR->SGPR copy, so any VGPR
operand requires the result to be a VGPR.
The changes in getInstrMappingImpl aren't strictly necessary, since
AMDGPU now just bypasses this for reg_sequence/phi. This could be
replaced with an assert in case other targets run into this. It is
currently responsible for producing the error for unsatisfiable
copies, but this will be better served with a verifier check.
For phis, for now assume any undetermined operands must be
VGPRs. Eventually, this needs to be able to defer mapping these
operations. This also does not yet have a way to check for whether the
block is in a divergent region.
llvm-svn: 363410
I'm not 100% sure about this, since I'm worried about IR transforms
that might end up introducing divergence downstream once replaced with
a constant, but I haven't come up with an example yet.
llvm-svn: 363406
This is the family of vector instructions that combine all the lanes
in their input vector(s), and output a value in one or two GPRs.
Differential Revision: https://reviews.llvm.org/D62670
llvm-svn: 363403
LLD test case will be fixed in a following commit.
Original commit message:
[yaml2obj] - Allow setting custom section types for implicit sections.
We were hardcoding the final section type for sections that
are usually implicit. The patch fixes that.
This also fixes a few issues in existent test cases and removes
one precompiled object.
Differential revision: https://reviews.llvm.org/D63267
llvm-svn: 363401
We were hardcoding the final section type for sections that
are usually implicit. The patch fixes that.
This also fixes a few issues in existent test cases and removes
one precompiled object.
Differential revision: https://reviews.llvm.org/D63267
llvm-svn: 363377
If dynamic table is missing, output "dynamic strtab not found'. If the index is
out of range, output "Invalid Offset<..>".
https://bugs.llvm.org/show_bug.cgi?id=40807
Reviewed by: jhenderson, grimar, MaskRay
Differential Revision: https://reviews.llvm.org/D63084
Patch by Yuanfang Chen.
llvm-svn: 363374
Initial commit of a new pass to create vector predication blocks, called VPT
blocks, that are supported by the Armv8.1-M MVE architecture.
This is a first naive implementation. I.e., for 2 consecutive predicated
instructions I1 and I2, for example, it will generate 2 VPT blocks:
VPST
I1
VPST
I2
A more optimal implementation would obviously put instructions in the same VPT
block when they are predicated on the same condition and when it is allowed to
do this:
VPTT
I1
I2
We will address this optimisation with follow up patches when the groundwork is
in. Creating VPT Blocks is very similar to IT Blocks, which is the reason I
added this to Thumb2ITBlocks.cpp. This allows reuse of the def use analysis
that we need for the more optimal implementation.
VPT blocks cannot be nested in IT blocks, and vice versa, and so these 2 passes
cannot interact with each other. Instructions allowed in VPT blocks must
be MVE instructions that are marked as VPT compatible.
Differential Revision: https://reviews.llvm.org/D63247
llvm-svn: 363370
Despite the fact that .strtab is non-allocatable,
there is no reason to disallow setting the custom address
for it.
The patch also adds a test case showing we can set any address
we want for other implicit sections.
Differential revision: https://reviews.llvm.org/D63137
llvm-svn: 363368
With this patch we get ability to set any flags we want
for implicit sections defined in YAML.
Differential revision: https://reviews.llvm.org/D63136
llvm-svn: 363367
InsertBinop now accepts NoWrapFlags, so pass them through when
expanding a simple add expression.
This is the first re-commit of the functional changes from rL362687,
which was previously reverted.
Differential Revision: https://reviews.llvm.org/D61934
llvm-svn: 363364
Summary: Tidied up errors during command line parsing to be more consistent with the rest of llvm-objcopy errors.
Reviewers: jhenderson, rupprecht, espindola, alexshap
Reviewed By: jhenderson, rupprecht
Subscribers: emaste, arichardson, MaskRay, llvm-commits, jakehehrlich
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D62973
llvm-svn: 363350
This is consistent with GCC's behavior (which is the defacto standard
for pubnames). Though I find the presence of enumerators from enum
classes to be a bit confusing, possibly a bug on GCC's end (since they
can't be named unqualified, unlike the other names - and names nested in
classes don't go in pubnames, for instance - presumably because one must
name the class first & that's enough to limit the scope of the search)
llvm-svn: 363349
Summary: AFAIK, the "sparc" target is big endian and the target for 32-bit little-endian SPARC is denoted as "sparcel". This patch fixes the endianness of "sparc" target and adds "sparcel" target for 32-bit little-endian SPARC.
Reviewers: espindola, alexshap, rupprecht, jhenderson
Reviewed By: jhenderson
Subscribers: jyknight, emaste, arichardson, fedor.sergeev, jakehehrlich, MaskRay, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D63251
llvm-svn: 363336
Summary:
Before it was using the fully qualified name only for static data members.
Now it does for all variable names to match MSVC.
Reviewers: rnk
Subscribers: hiraditya, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D63012
llvm-svn: 363335
Constants, including G_GLOBAL_VALUE, are all emitted into the entry block which
lets us use the vreg def assuming it dominates all other users. However, it can
cause jumpy debug behaviour since the DebugLoc attached to these MIs are from
a user instruction that could be in a different block.
Fixes PR40887.
Differential Revision: https://reviews.llvm.org/D63286
llvm-svn: 363331
This was exposed by PowerPC target enablement.
In ScheduleDAG, if we haven't seen any uses in this scheduling region,
we will create a dependence edge to ExitSU to model the live-out latency.
This is required for vreg defs with no in-region use, and prefetches with
no vreg def.
When we build NodeOrder in Scheduler, we ignore these boundary nodes.
However, when we check Succs in checkValidNodeOrder, we did not skip
them, so we still assume all the nodes have been sorted and in order in
Indices array. So when we call lower_bound() for ExitSU, it will return
Indices.end(), causing memory issues in following Node access.
Differential Revision: https://reviews.llvm.org/D63282
llvm-svn: 363329
Support loading code coverage data from regular archives, thin archives,
and from MachO universal binaries which contain archives.
Testing: check-llvm, check-profile (with {A,UB}San enabled)
rdar://51538999
Differential Revision: https://reviews.llvm.org/D63232
llvm-svn: 363325
Also add baseline tests to show effect of later patches.
There were a couple of regressions here that were never caught,
but my patch set that this is a preparation to will fix them.
This is the third attempt to land this patch.
Differential Revision: https://reviews.llvm.org/D61150
llvm-svn: 363319
This contains fixes for two cases where we might invalidate inbounds and leave it stale in the IR (a miscompile). Case 1 is when switching to an IV with no dynamically live uses, and case 2 is when doing pre-to-post conversion on the same pointer type IV.
The basic scheme used is to prove that using the given IV (pre or post increment forms) would have to already trigger UB on the path to the test we're modifying. As such, our potential UB triggering use does not change the semantics of the original program.
As was pointed out in the review thread by Nikita, this is defending against a separate issue from the hasConcreteDef case. This is about poison, that's about undef. Unfortunately, the two are different, see Nikita's comment for a fuller explanation, he explains it well.
(Note: I'm going to address Nikita's last style comment in a separate commit just to minimize chance of subtle bugs being introduced due to typos.)
Differential Revision: https://reviews.llvm.org/D62939
llvm-svn: 363289
Summary:
I found the following case having tail blocks with no successors merging opportunities after block placement.
Before block placement:
bb0:
...
bne a0, 0, bb2:
bb1:
mv a0, 1
ret
bb2:
...
bb3:
mv a0, 1
ret
bb4:
mv a0, -1
ret
The conditional branch bne in bb0 is opposite to beq.
After block placement:
bb0:
...
beq a0, 0, bb1
bb2:
...
bb4:
mv a0, -1
ret
bb1:
mv a0, 1
ret
bb3:
mv a0, 1
ret
After block placement, that appears new tail merging opportunity, bb1 and bb3 can be merged as one block. So the conditional constraint for merging tail blocks with no successors should be removed. In my experiment for RISC-V, it decreases code size.
Author of original patch: Jim Lin
Reviewers: haicheng, aheejin, craig.topper, rnk, RKSimon, Jim, dmgreen
Reviewed By: Jim, dmgreen
Subscribers: xbolva00, dschuff, javed.absar, sbc100, jgravelle-google, aheejin, kito-cheng, dmgreen, PkmX, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D54411
llvm-svn: 363284
Summary:
The logic in EarlyCSE that looks through 'not' operations in the
predicate recognizes e.g. that `select (not (cmp sgt X, Y)), X, Y` is
equivalent to `select (cmp sgt X, Y), Y, X`. Without this change,
however, only the latter is recognized as a form of `smin X, Y`, so the
two expressions receive different hash codes. This leads to missed
optimization opportunities when the quadratic probing for the two hashes
doesn't happen to collide, and assertion failures when probing doesn't
collide on insertion but does collide on a subsequent table grow
operation.
This change inverts the order of some of the pattern matching, checking
first for the optional `not` and then for the min/max/abs patterns, so
that e.g. both expressions above are recognized as a form of `smin X, Y`.
It also adds an assertion to isEqual verifying that it implies equal
hash codes; this fires when there's a collision during insertion, not
just grow, and so will make it easier to notice if these functions fall
out of sync again. A new flag --earlycse-debug-hash is added which can
be used when changing the hash function; it forces hash collisions so
that any pair of values inserted which compare as equal but hash
differently will be caught by the isEqual assertion.
Reviewers: spatel, nikic
Reviewed By: spatel, nikic
Subscribers: lebedev.ri, arsenm, craig.topper, efriedma, hiraditya, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D62644
llvm-svn: 363274
Summary:
Relate bug: https://bugs.llvm.org/show_bug.cgi?id=37472
The shrink wrapping pass prematurally restores the stack, at a point where the stack might still be accessed.
Taking an exception can cause the stack to be corrupted.
As a first approach, this patch is overly conservative, assuming that any instruction that may load or store could access
the stack.
Reviewers: dmgreen, qcolombet
Reviewed By: qcolombet
Subscribers: simpal01, efriedma, eli.friedman, javed.absar, llvm-commits, eugenis, chill, carwil, thegameg
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D63152
llvm-svn: 363265
This commit prepares the way to start adding the main collection of
MVE instructions, which operate on the 128-bit vector registers.
The most obvious thing that's needed, and the simplest, is to add the
MQPR register class, which is like the existing QPR except that it has
fewer registers in it.
The more complicated part: MVE defines a system of vector predication,
in which instructions operating on 128-bit vector registers can be
constrained to operate on only a subset of the lanes, using a system
of prefix instructions similar to the existing Thumb IT, in that you
have one prefix instruction which designates up to 4 following
instructions as subject to predication, and within that sequence, the
predicate can be inverted by means of T/E suffixes ('Then' / 'Else').
To support instructions of this type, we've added two new Tablegen
classes `vpred_n` and `vpred_r` for standard clusters of MC operands
to add to a predicated instruction. Both include a flag indicating how
the instruction is predicated at all (options are T, E and 'not
predicated'), and an input register field for the register controlling
the set of active lanes. They differ from each other in that `vpred_r`
also includes an input operand for the previous value of the output
register, for instructions that leave inactive lanes unchanged.
`vpred_n` lacks that extra operand; it will be used for instructions
that don't preserve inactive lanes in their output register (either
because inactive lanes are zeroed, as the MVE load instructions do, or
because the output register isn't a vector at all).
This commit also adds the family of prefix instructions themselves
(VPT / VPST), and all the machinery needed to work with them in
assembly and disassembly (e.g. generating the 't' and 'e' mnemonic
suffixes on disassembled instructions within a predicated block)
I've added a couple of demo instructions that derive from the new
Tablegen base classes and use those two operand clusters. The bulk of
the vector instructions will come in followup commits small enough to
be manageable. (One exception is that I've added the full version of
`isMnemonicVPTPredicable` in the AsmParser, because it seemed
pointless to carefully split it up.)
Reviewers: dmgreen, samparker, SjoerdMeijer, t.p.northover
Subscribers: javed.absar, kristof.beyls, hiraditya, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D62669
llvm-svn: 363258
This patch makes the LiveDebugValues pass consider fragments when propagating
DBG_VALUE insts between blocks, fixing PR41979. Fragment info for a variable
location is added to the open-ranges key, which allows distinct fragments to be
tracked separately. To handle overlapping fragments things become slightly
funkier. To avoid excessive searching for overlaps in the data-flow part of
LiveDebugValues, this patch:
* Pre-computes pairings of fragments that overlap, for each DILocalVariable
* During data-flow, whenever something happens that causes an open range to
be terminated (via erase), any fragments pre-determined to overlap are
also terminated.
The effect of which is that when encountering a DBG_VALUE fragment that
overlaps others, the overlapped fragments do not get propagated to other
blocks. We still rely on later location-list building to correctly handle
overlapping fragments within blocks.
It's unclear whether a mixture of DBG_VALUEs with and without fragmented
expressions are legitimate. To avoid suprises, this patch interprets a
DBG_VALUE with no fragment as overlapping any DBG_VALUE _with_ a fragment.
Differential Revision: https://reviews.llvm.org/D62904
llvm-svn: 363256
We aim to ignore changes in variable locations during the prologue and
epilogue of functions, to avoid using space documenting location changes
that aren't visible. However in D61940 / r362951 this got ripped out as
the previous implementation was unsound.
Instead, use the FrameDestroy flag to identify when we're in the epilogue
of a function, and ignore variable location changes accordingly. This fits
in with existing code that examines the FrameSetup flag.
Some variable locations get shuffled in modified tests as they now cover
greater ranges, which is what would be expected. Some additional
single-location variables are generated too. Two tests are un-xfailed,
they were only xfailed due to r362951 deleting functionality they depended
on.
Apparently some out-of-tree backends don't accurately maintain FrameDestroy
flags -- if you're an out-of-tree maintainer and see changes in variable
locations disappear due to a faulty FrameDestroy flag, it's safe to back
this change out. The impact is just slightly more debug info than necessary.
Differential Revision: https://reviews.llvm.org/D62314
llvm-svn: 363245
This patch uses the mechanism from D62995 to strengthen the
definitions of the reduction intrinsics by letting the scalar
result/accumulator type be overloaded from the vector element type.
For example:
; The LLVM LangRef specifies that the scalar result must equal the
; vector element type, but this is not checked/enforced by LLVM.
declare i32 @llvm.experimental.vector.reduce.or.i32.v4i32(<4 x i32> %a)
This patch changes that into:
declare i32 @llvm.experimental.vector.reduce.or.v4i32(<4 x i32> %a)
Which has the type-constraint more explicit and causes LLVM to check
the result type with the vector element type.
Reviewers: RKSimon, arsenm, rnk, greened, aemerson
Reviewed By: arsenm
Differential Revision: https://reviews.llvm.org/D62996
llvm-svn: 363240
TTI should report that it's not profitable to generate a hardware loop
if it, or one of its child loops, has already been converted.
Differential Revision: https://reviews.llvm.org/D63212
llvm-svn: 363234
$noreg was being used way more than it should have. We also had
xmm registers in addressing modes.
Mostly found by hacking the machine verifier to do some stricter
checking that happened to work for this test, but not sure if
generally applicable for other tests or other targets.
llvm-svn: 363231
This reverts 363226 and 363227, both NFC intended
I swear I fixed the test case that is failing, and ran
the tests, but I will look into it again.
llvm-svn: 363229
Also add baseline tests to show effect of later patches.
There were a couple of regressions here that were never caught,
but my patch set that this is a preparation to will fix them.
Differential Revision: https://reviews.llvm.org/D61150
llvm-svn: 363226
see if my changes change anything
Also add baseline tests to show effect of later patches.
Differential Revision: https://reviews.llvm.org/D61150
llvm-svn: 363222
We have observed some failures with internal builds with this revision.
- Performance regressions:
- llvm's SingleSource/Misc evalloop shows performance regressions (although these may be red herrings).
- Benchmarks for Abseil's SwissTable.
- Correctness:
- Failures for particular libicu tests when building the Google AppEngine SDK (for PHP).
hwennborg has already been notified, and is aware of reproducer failures.
llvm-svn: 363220
Summary:
Use llvm::fouts() as the default stream for outputing. No new stream
should be constructed to output at the same time.
https://bugs.llvm.org/show_bug.cgi?id=42140
Reviewers: jhenderson, grimar, MaskRay, phosek, rupprecht
Reviewed By: rupprecht
Subscribers: llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D63115
Patch by Yuanfang Chen!
llvm-svn: 363198
The issue addressed in r363180 is more broadly relevant. For the moment, we don't actually get any of these cases because we a) restrict SCEV formation due to SCEExpander needing to preserve LCSSA, and b) don't iterate between loops.
llvm-svn: 363192
Summary: thin-archive.test assumes the Output/<testname> structure that lit creates. Rewrite the test in a way that still tests the same thing (creating via relative path and adding via absolute path) but doesn't assume this specific lit structure, making it possible to run in a lit emulator.
Reviewers: gbreynoo
Reviewed By: gbreynoo
Subscribers: llvm-commits, bkramer
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D62930
llvm-svn: 363189
Add support for s.d instruction for Mips1 which expands into two swc1
instructions.
Patch by Mirko Brkusanin.
Differential Revision: https://reviews.llvm.org/D63199
llvm-svn: 363184
SCEV does not propagate arguments through one-input Phis so as to make it easy for the SCEV expander (and related code) to preserve LCSSA. It's not entirely clear this restriction is neccessary, but for the moment it exists. For this reason, we don't analyze single-entry phi inputs. However it is possible that when an this input leaves the loop through LCSSA Phi, it is a provable constant. Missing that results in an order of optimization issue in loop exit value rewriting where we miss some oppurtunities based on order in which we visit sibling loops.
This patch teaches computeSCEVAtScope about this case. We can generalize it later, but so far we can only replace LCSSA Phis with their constant loop-exiting values. We should probably also add similiar logic directly in the SCEV construction path itself.
Patch by: mkazantsev (with revised commit message by me)
Differential Revision: https://reviews.llvm.org/D58113
llvm-svn: 363180
This was using its own, outdated list of possible captures. This was
at minimum not catching cmpxchg and addrspacecast captures.
One change is now any volatile access is treated as capturing. The
test coverage for this pass is quite inadequate, but this required
removing volatile in the lifetime capture test.
Also fixes some infrastructure issues to allow running just the IR
pass.
Fixes bug 42238.
llvm-svn: 363169
This changes the standalone pass only. Arguably the utility class
itself should assert there are no convergent calls. However, a target
pass with additional context may still be able to version a loop if
all of the dynamic conditions are sufficiently uniform.
llvm-svn: 363165
Summary:
Fix hoisting to basic block which are not legal for hoisting cause
it can be terminated by exception or it is return block.
Reviewers: john.brawn, RKSimon, MatzeB
Subscribers: hiraditya, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D63148
llvm-svn: 363164
This case is slightly tricky, because loop distribution should be
allowed in some cases, and not others. As long as runtime dependency
checks don't need to be introduced, this should be OK. This is further
complicated by the fact that LoopDistribute partially ignores if LAA
says that vectorization is safe, and then does its own runtime pointer
legality checks.
Note this pass still does not handle noduplicate correctly, as this
should always be forbidden with it. I'm not going to bother trying to
fix it, as it would require more effort and I think noduplicate should
be removed.
https://reviews.llvm.org/D62607
llvm-svn: 363160
Implement the backend target hook to drive the HardwareLoops pass.
The low-overhead branch extension for Arm M-class cores is flexible
enough that we don't have to ensure correctness at this point, except
checking that the loop counter variable can be stored in LR - a
32-bit register. For it to be profitable, we want to avoid loops that
contain function calls, or any other instruction that alters the PC.
This implementation uses TargetLoweringInfo, to query type and
operation actions, looks at intrinsic calls and also performs some
manual checks for remainder/division and FP operations.
I think this should be a good base to start and extra details can be
filled out later.
Differential Revision: https://reviews.llvm.org/D62907
llvm-svn: 363149
Dependent libraries support for the legacy api was committed in a
broken state (see: https://reviews.llvm.org/D60274). This was missed
due to the painful nature of having to integrate the changes into a
linker in order to test. This change implements support for dependent
libraries in the legacy LTO api:
- I have removed the current api function, which returns a single
string, and added functions to access each dependent library
specifier individually.
- To reduce the testing pain, I have made the api functions as thin as
possible to maximize coverage from llvm-lto.
- When doing ThinLTO the system linker will load the modules lazily
when scanning the input files. Unfortunately, when modules are
lazily loaded there is no access to module level named metadata. To
fix this I have added api functions that allow querying the IRSymtab
for the dependent libraries. I hope to expand the api in the future
so that, eventually, all the information needed by a client linker
during scan can be retrieved from the IRSymtab.
Differential Revision: https://reviews.llvm.org/D62935
llvm-svn: 363140
When these tests were originally written, the middle end would introduce
an unnecessary copy from r24:r23->GPR16->r24:r23, and these tests
mistakenly relied on it.
The most optimal codegen for the functions in the test cases before this patch
would be NOPs. This is because the first i16 argument always gets the same register
allocation as an i16 return value in the AVR calling convention.
These tests broke in r362963 when the codegen was improved and the
redundant copy was eliminated. After this, the test functions
were lowered to their optimal form - a 'ret' and nothing else.
This patch prepends an extra i16 operand to each of the test functions
so that a 16-bit copy must be inserted for the program to be correct.
llvm-svn: 363131
Extern global merging is good for code-size. There's definitely potential for
performance too, but there's one regression in a benchmark that needs
investigating, so that's why we enable it only when we optimise for size for
now.
Patch by Ramakota Reddy and Sjoerd Meijer.
Differential Revision: https://reviews.llvm.org/D61947
llvm-svn: 363130
In order to generate correct debug frame information, it needs to
generate CFI information in prologue and epilog.
Differential Revision: https://reviews.llvm.org/D61773
llvm-svn: 363120
We were only matching RHS being a loop invariant value, not the inverse. Since there's nothing which appears to canonicalize loop invariant values to RHS, this means we missed cases.
Differential Revision: https://reviews.llvm.org/D63112
llvm-svn: 363108
Looks like a MachinePipeliner algorithm problem found by
sanitizer-x86_64-linux-fast.
I will backout this test first while investigating the problem to
unblock buildbot.
==49637==ERROR: AddressSanitizer: heap-buffer-overflow on address
0x614000002e08 at pc 0x000004364350 bp 0x7ffe228a3bd0 sp 0x7ffe228a3bc8
READ of size 4 at 0x614000002e08 thread T0
#0 0x436434f in
llvm::SwingSchedulerDAG::checkValidNodeOrder(llvm::SmallVector<llvm::NodeSet,
8u> const&) const
/b/sanitizer-x86_64-linux-fast/build/llvm/lib/CodeGen/MachinePipeliner.cpp:3736:11
#1 0x4342cd0 in llvm::SwingSchedulerDAG::schedule()
/b/sanitizer-x86_64-linux-fast/build/llvm/lib/CodeGen/MachinePipeliner.cpp:486:3
#2 0x434042d in
llvm::MachinePipeliner::swingModuloScheduler(llvm::MachineLoop&)
/b/sanitizer-x86_64-linux-fast/build/llvm/lib/CodeGen/MachinePipeliner.cpp:385:7
#3 0x433eb90 in
llvm::MachinePipeliner::runOnMachineFunction(llvm::MachineFunction&)
/b/sanitizer-x86_64-linux-fast/build/llvm/lib/CodeGen/MachinePipeliner.cpp:207:5
#4 0x428b7ea in
llvm::MachineFunctionPass::runOnFunction(llvm::Function&)
/b/sanitizer-x86_64-linux-fast/build/llvm/lib/CodeGen/MachineFunctionPass.cpp:73:13
#5 0x4d1a913 in llvm::FPPassManager::runOnFunction(llvm::Function&)
/b/sanitizer-x86_64-linux-fast/build/llvm/lib/IR/LegacyPassManager.cpp:1648:27
#6 0x4d1b192 in llvm::FPPassManager::runOnModule(llvm::Module&)
/b/sanitizer-x86_64-linux-fast/build/llvm/lib/IR/LegacyPassManager.cpp:1685:16
#7 0x4d1c06d in runOnModule
/b/sanitizer-x86_64-linux-fast/build/llvm/lib/IR/LegacyPassManager.cpp:1752:27
#8 0x4d1c06d in llvm::legacy::PassManagerImpl::run(llvm::Module&)
/b/sanitizer-x86_64-linux-fast/build/llvm/lib/IR/LegacyPassManager.cpp:1865
#9 0xa48ca3 in compileModule(char**, llvm::LLVMContext&)
/b/sanitizer-x86_64-linux-fast/build/llvm/tools/llc/llc.cpp:611:8
#10 0xa4270f in main
/b/sanitizer-x86_64-linux-fast/build/llvm/tools/llc/llc.cpp:365:22
#11 0x7fec902572e0 in __libc_start_main
(/lib/x86_64-linux-gnu/libc.so.6+0x202e0)
#12 0x971b69 in _start
(/b/sanitizer-x86_64-linux-fast/build/llvm_build_asan/bin/llc+0x971b69)
llvm-svn: 363105
This opcode generates a pointer to the address of the jump table
specified by the source operand, which is a jump table index.
It will be used in conjunction with an upcoming G_BRJT opcode to support
jump table codegen with GlobalISel.
Differential Revision: https://reviews.llvm.org/D63111
llvm-svn: 363096
Summary: After applying a set of insert updates, there may be trivial Phis left over. Clean them up.
Reviewers: george.burgess.iv
Subscribers: jlebar, Prazek, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D63033
llvm-svn: 363094
Implement necessary target hooks to enable MachinePipeliner for P9 only.
The pass is off by default, can be enabled with -ppc-enable-pipeliner for P9.
Differential Revision: https://reviews.llvm.org/D62164
llvm-svn: 363085
This patch allows lowering of PIC addresses by using PC-relative
addressing for DSO-local symbols and accessing the address through the
global offset table for non-DSO-local symbols.
Differential Revision: https://reviews.llvm.org/D55303
llvm-svn: 363058
This validates and lowers arguments to inline asm nodes which have the
constraints I, J & K, with the following semantics (equivalent to GCC):
I: Any 12-bit signed immediate.
J: Immediate integer zero only.
K: Any 5-bit unsigned immediate.
Differential Revision: https://reviews.llvm.org/D54093
llvm-svn: 363054
This introduces a new decoding table for MVE instructions, and starts
by adding the family of scalar shift instructions that are part of the
MVE architecture extension: saturating shifts within a single GPR, and
long shifts across a pair of GPRs (both saturating and normal).
Some of these shift instructions have only 3-bit register fields in
the encoding, with the low bit fixed. So they can only address an odd
or even numbered GPR (depending on the operand), and therefore I add
two new register classes, GPREven and GPROdd.
Differential Revision: https://reviews.llvm.org/D62668
Change-Id: Iad95d5f83d26aef70c674027a184a6b1e0098d33
llvm-svn: 363051
For lld, pass in Config->Timestamp (which is set based on lld's
/timestamp: and /Brepro flags). Since the writeWindowsResourceCOFF()
data is only used in-memory by LLD and the obj's timestamp isn't used
for anything in the output, this doesn't change behavior.
For llvm-cvtres, add an optional /timestamp: parameter, and use the
current behavior of calling time() if the parameter is not passed in.
This doesn't really change observable behavior (unless someone passes
/timestamp: to llvm-cvtres, which wasn't possible before), but it
removes the last unqualified call to time() from llvm/lib, which seems
like a good thing.
Differential Revision: https://reviews.llvm.org/D63116
llvm-svn: 363050
Summary:
Bug: https://bugs.llvm.org/show_bug.cgi?id=39024
The bug reports that a vectorized loop is stepped through 4 times and each step through the loop seemed to show a different path. I found two problems here:
A) An incorrect line number on a preheader block (for.body.preheader) instruction causes a step into the loop before it begins.
B) Instructions in the middle block have different line numbers which give the impression of another iteration.
In this patch I give all of the middle block instructions the line number of the scalar loop latch terminator branch. This seems to provide the smoothest debugging experience because the vectorized loops will always end on this line before dropping into the scalar loop. To solve problem A I have altered llvm::SplitBlockPredecessors to accommodate loop header blocks.
I have set up a separate review D61933 for a fix which is required for this patch.
Reviewers: samsonov, vsk, aprantl, probinson, anemet, hfinkel, jmorse
Reviewed By: hfinkel, jmorse
Subscribers: jmorse, javed.absar, eraman, kcc, bjope, jmellorcrummey, hfinkel, gbedwell, hiraditya, zzheng, llvm-commits
Tags: #llvm, #debug-info
Differential Revision: https://reviews.llvm.org/D60831
llvm-svn: 363046
-o is in the documentation, but not in the llvm-dwarfdump help text.
This patch adds it by inverting the -o and --out-file aliasing. It also
removes --out-file from the documentation, since we don't really want
people to be using this switch in practice.
Reviewed by: aprantl, JDevlieghere, dblaikie
Differential Revision: https://reviews.llvm.org/D63013
llvm-svn: 363044
Allow using both custom numeric and string values for Link field of the
dynamic and regular symbol tables.
Differential revision: https://reviews.llvm.org/D63077
llvm-svn: 363042
This adds support for the new family of conditional selection /
increment / negation instructions; the low-overhead branch
instructions (e.g. BF, WLS, DLS); the CLRM instruction to zero a whole
list of registers at once; the new VMRS/VMSR and VLDR/VSTR
instructions to get data in and out of 8.1-M system registers,
particularly including the new VPR register used by MVE vector
predication.
To support this, we also add a register name 'zr' (used by the CSEL
family to force one of the inputs to the constant 0), and operand
types for lists of registers that are also allowed to include APSR or
VPR (used by CLRM). The VLDR/VSTR instructions also need a new
addressing mode.
The low-overhead branch instructions exist in their own separate
architecture extension, which we treat as enabled by default, but you
can say -mattr=-lob or equivalent to turn it off.
Reviewers: dmgreen, samparker, SjoerdMeijer, t.p.northover
Reviewed By: samparker
Subscribers: miyuki, javed.absar, kristof.beyls, hiraditya, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D62667
llvm-svn: 363039
This patch changes how LLVM handles the accumulator/start value
in the reduction, by never ignoring it regardless of the presence of
fast-math flags on callsites. This change introduces the following
new intrinsics to replace the existing ones:
llvm.experimental.vector.reduce.fadd -> llvm.experimental.vector.reduce.v2.fadd
llvm.experimental.vector.reduce.fmul -> llvm.experimental.vector.reduce.v2.fmul
and adds functionality to auto-upgrade existing LLVM IR and bitcode.
Reviewers: RKSimon, greened, dmgreen, nikic, simoll, aemerson
Reviewed By: nikic
Differential Revision: https://reviews.llvm.org/D60261
llvm-svn: 363035
This makes the interface simpler and more consistent with the interface for
.dSYM files and fixes a bug where llvm-symbolizer would not read the dwp if
it was asked to symbolize data before symbolizing code.
Differential Revision: https://reviews.llvm.org/D63114
llvm-svn: 363025
And share some code with lld-link.
While here, also add a FIXME about PR42180 and merge r360150 to llvm-lib.
Differential Revision: https://reviews.llvm.org/D63021
llvm-svn: 363016
As pointed out by Nikita in review, undef and poison need to be handled separately. Since we're no longer expecting any test improvements - just fixes for miscompiles - update the tests to bypass the existing undef check.
llvm-svn: 363002
As shown in PR41279, some basic blocks (such as catchswitch) cannot be
instrumented. This patch filters out these BBs in PGO instrumentation.
It also sets the profile count to the fail-to-instrument edge, so that we
can propagate the counts in the CFG.
Differential Revision: https://reviews.llvm.org/D62700
llvm-svn: 362995
There are two interesting sub-cases here. 1) Switching IVs is legal, but only in pre-increment form. and 2) Switching IVs is legal, and so is post-increment form.
llvm-svn: 362993
If the source is undef, then just don't do anything.
This matches SelectionDAG's behaviour in SelectionDAG.cpp.
Also add a test showing that we do the right thing here.
(irtranslator-memfunc-undef.ll)
Differential Revision: https://reviews.llvm.org/D63095
llvm-svn: 362989
Flesh out a collection of tests for switching to a dead IV within LFTR, both for the current miscompile, and for some cases which we should be able to handle via simple reasoning.
llvm-svn: 362976
This was discussed as part of D62880. The basic thought is that computing BE taken count after widening should produce (on average) an equally good backedge taken count as the one before widening. Since there's only one test in the suite which is impacted by this change, and it's essentially equivelent codegen, that seems to be a reasonable assertion. This change was separated from r362971 so that if this turns out to be problematic, the triggering piece is obvious and easily revertable.
For the nestedIV example from elim-extend.ll, we end up with the following BE counts:
BEFORE: (-2 + (-1 * %innercount) + %limit)
AFTER: (-1 + (sext i32 (-1 + %limit) to i64) + (-1 * (sext i32 %innercount to i64))<nsw>)
Note that before is an i32 type, and the after is an i64. Truncating the i64 produces the i32.
llvm-svn: 362975
This was found during HTM cleanup.
Adding a test for builtin_ttest would expose following issue.
*** Bad machine code: Illegal physical register for instruction ***
- function: test10
- basic block: %bb.0 entry (0xf0e57497b58)
- instruction: %5:crrc0 = TABORTWCI 0, $zero, 0
- operand 2: $zero
$zero is not a GPRC register.
LLVM ERROR: Found 1 machine code errors.
Differential Revision: https://reviews.llvm.org/D63079
llvm-svn: 362974
Summary:
When llvm-objcopy sorts sections during finalization, it only sorts based on the offset, which can cause the group section to come after the sections it contains. This causes link failures when using gold to link objects created by llvm-objcopy.
Fix this for now by copying GNU objcopy's behavior of placing SHT_GROUP sections first. In the future, we may want to remove this sorting entirely to more closely preserve the input file layout.
This fixes https://bugs.llvm.org/show_bug.cgi?id=42052.
Reviewers: jakehehrlich, jhenderson, MaskRay, espindola, alexshap
Reviewed By: MaskRay
Subscribers: phuongtrang148993, emaste, arichardson, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D62620
llvm-svn: 362973
The ELF gABI requires the tag values of DT_REL, DT_RELA and DT_JMPREL to be
treated as virtual addresses. They were treated as offsets. Fixes PR41832.
Differential Revision: https://reviews.llvm.org/D62972
llvm-svn: 362969
Bottleneck Analysis is one of the many views available in llvm-mca. Therefore,
it should be enabled when flag -all-views is passed in input to the tool.
llvm-svn: 362964
This behavior was added in r130928 for both FastISel and SD, and then
disabled in r131156 for FastISel.
This re-enables it for FastISel with the corresponding fix.
This is triggered only when FastISel can't lower the arguments and falls
back to SelectionDAG for it.
FastISel contains a map of "register fixups" where at the end of the
selection phase it replaces all uses of a register with another
register that FastISel sometimes pre-assigned. Code at the end of
SelectionDAGISel::runOnMachineFunction is doing the replacement at the
very end of the function, while other pieces that come in before that
look through the MachineFunction and assume everything is done. In this
case, the real issue is that the code emitting COPY instructions for the
liveins (physreg to vreg) (EmitLiveInCopies) is checking if the vreg
assigned to the physreg is used, and if it's not, it will skip the COPY.
If a register wasn't replaced with its assigned fixup yet, the copy will
be skipped and we'll end up with uses of undefined registers.
This fix moves the replacement of registers before the emission of
copies for the live-ins.
The initial motivation for this fix is to enable tail calls for
swiftself functions, which were blocked because we couldn't prove that
the swiftself argument (which is callee-save) comes from a function
argument (live-in), because there was an extra copy (vreg to vreg).
A few tests are affected by this:
* llvm/test/CodeGen/AArch64/swifterror.ll: we used to spill x21
(callee-save) but never reload it because it's attached to the return.
We now don't even spill it anymore.
* llvm/test/CodeGen/*/swiftself.ll: we tail-call now.
* llvm/test/CodeGen/AMDGPU/mubuf-legalize-operands.ll: I believe this
test was not really testing the right thing, but it worked because the
same registers were re-used.
* llvm/test/CodeGen/ARM/cmpxchg-O0.ll: regalloc changes
* llvm/test/CodeGen/ARM/swifterror.ll: get rid of a copy
* llvm/test/CodeGen/Mips/*: get rid of spills and copies
* llvm/test/CodeGen/SystemZ/swift-return.ll: smaller stack
* llvm/test/CodeGen/X86/atomic-unordered.ll: smaller stack
* llvm/test/CodeGen/X86/swifterror.ll: same as AArch64
* llvm/test/DebugInfo/X86/dbg-declare-arg.ll: stack size changed
Differential Revision: https://reviews.llvm.org/D62361
llvm-svn: 362963
These caused a build failure because I managed not to notice they
depended on a later unpushed commit in my current stack. Sorry about
that.
llvm-svn: 362956
This should have been part of r362953, but I had a finger-trouble
incident and committed the old rather than new version of the patch.
Sorry.
llvm-svn: 362955
This adds support for the new family of conditional selection /
increment / negation instructions; the low-overhead branch
instructions (e.g. BF, WLS, DLS); the CLRM instruction to zero a whole
list of registers at once; the new VMRS/VMSR and VLDR/VSTR
instructions to get data in and out of 8.1-M system registers,
particularly including the new VPR register used by MVE vector
predication.
To support this, we also add a register name 'zr' (used by the CSEL
family to force one of the inputs to the constant 0), and operand
types for lists of registers that are also allowed to include APSR or
VPR (used by CLRM). The VLDR/VSTR instructions also need some new
addressing modes.
The low-overhead branch instructions exist in their own separate
architecture extension, which we treat as enabled by default, but you
can say -mattr=-lob or equivalent to turn it off.
Reviewers: dmgreen, samparker, SjoerdMeijer, t.p.northover
Reviewed By: samparker
Subscribers: miyuki, javed.absar, kristof.beyls, hiraditya, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D62667
llvm-svn: 362953
Summary: Dependence Analysis performs static checks to confirm validity
of delinearization. These checks often fail for 64-bit targets due to
type conversions and integer wrapping that prevent simplification of the
SCEV expressions. These checks would also fail at compile-time if the
lower bound of the loops are compile-time unknown.
Author: bmahjour
Reviewer: Meinersbur, jdoerfert, kbarton, dmgreen, fhahn
Reviewed By: Meinersbur, jdoerfert, dmgreen
Subscribers: fhahn, hiraditya, javed.absar, llvm-commits, Whitney,
etiotto
Tag: LLVM
Differential Revision: https://reviews.llvm.org/D62610
llvm-svn: 362952
This commit reapplies r359426 (which was reverted in r360301 due to
performance problems) and rolls in D61940 to address the performance problem.
I've combined the two to avoid creating a span of slow-performance, and to
ease reverting if more problems crop up.
The summary of D61940: This patch removes the "ChangingRegs" facility in
DbgEntityHistoryCalculator, as its overapproximate nature can produce incorrect
variable locations. An unchanging register doesn't mean a variable doesn't
change its location.
The patch kills off everything that calculates the ChangingRegs vector.
Previously ChangingRegs spotted epilogues and marked registers as unchanging if
they weren't modified outside the epilogue, increasing the chance that we can
emit a single-location variable record. Without this feature,
debug-loc-offset.mir and pr19307.mir become temporarily XFAIL. They'll be
re-enabled by D62314, using the FrameDestroy flag to identify epilogues, I've
split this into two steps as FrameDestroy isn't necessarily supported by all
backends.
The logic for terminating variable locations at the end of a basic block now
becomes much more enjoyably simple: we just terminate them all.
Other test changes: inlined-argument.ll becomes XFAIL, but for a longer term.
The current algorithm for detecting that a variable has a single-location
doesn't work in this scenario (inlined function in multiple blocks), only other
bugs were making this test work. fission-ranges.ll gets slightly refreshed too,
as the location of "p" is now correctly determined to be a single location.
Differential Revision: https://reviews.llvm.org/D61940
llvm-svn: 362951
Similar to rL362909:
This isn't the ideal fix (use FMF on the select), but it's still an
improvement until we have better FMF propagation to selects and other
FP math operators.
I don't think there's much risk of regression from this change by
not including the FMF on the fcmp any more. The nsz/nnan FMF
should be the same on the fcmp and the fsub because they have the
same operand.
llvm-svn: 362943
Arm v8.1-M supports the VMOV instructions that move a half-precision
value to and from a GPR, but not if the GPR is SP or PC.
To fix this, I've changed those instructions to use the rGPR register
class instead of GPR. rGPR always excludes PC, and it excludes SP
except in the presence of the HasV8Ops target feature (i.e. Arm v8-A).
So the effect is that VMOV.F16 to and from PC is now illegal
everywhere, but VMOV.F16 to and from SP is illegal only on non-v8-A
cores (which I believe is all as it should be).
Reviewers: dmgreen, samparker, SjoerdMeijer, ostannard
Reviewed By: ostannard
Subscribers: ostannard, javed.absar, kristof.beyls, hiraditya, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D60704
llvm-svn: 362942
This is a follow-up for D62809.
Content and Size fields should be optional as was discussed in comments
of the D62809's thread. With that, we can describe a specific string table and
symbol table sections in a more correct way and also show appropriate errors.
The patch adds lots of test cases where the behavior is described in details.
Differential revision: https://reviews.llvm.org/D62957
llvm-svn: 362931
We have a code in buildSectionIndex() that adds implicit sections:
// Add special sections after input sections, if necessary.
for (StringRef Name : implicitSectionNames())
if (SN2I.addName(Name, SecNo)) {
// Account for this section, since it wasn't in the Doc
++SecNo;
DotShStrtab.add(Name);
}
The problem arises when .dynsym is specified explicitly and no
DynamicSymbols is used. In that case, we do not add
.dynstr implicitly and will assert later when will try to set Link
for .dynsym.
Seems, in this case, reasonable behavior is to allow Link field to be zero.
This is what this patch does.
Differential revision: https://reviews.llvm.org/D63001
llvm-svn: 362929
This option allows loops with small max trip counts to be fully unrolled. This
can help with code like the remainder loops from manually unrolled loops like
those that appear in the cmsis dsp library. We would apparently previously
runtime unroll them with the default unroll count (4).
Differential Revision: https://reviews.llvm.org/D63064
llvm-svn: 362928
Variable's stack location can stretch longer than it should. If a
variable is placed at the stack in a some nested basic block its range
can be calculated to be up to the next occurrence of the variable's
DBG_VALUE, or up to the end of the function, thus covering a basic
blocks that should not be included in the variable’s location range.
This happens because the DbgEntityHistoryCalculator ends register
locations at the end of a basic block only if the variable’s location
register has been changed throughout the function, which is not the
case for the register used to reference stack objects.
This patch also tries to produce a single value location if the location
list builder managed to merge all the locations into one.
Reviewers: aprantl, dstenb, jmorse
Reviewed By: aprantl, dstenb, jmorse
Subscribers: djtodoro, ivanbaev, asowda
Tags: #debug-info
Differential Revision: https://reviews.llvm.org/D61600
llvm-svn: 362923
This opportunity is found from spec 2017 557.xz_r. And it is used by the sha encrypt/decrypt. See sha-2/sha512.c
static void store64(u64 x, unsigned char* y)
{
for(int i = 0; i != 8; ++i)
y[i] = (x >> ((7-i) * 8)) & 255;
}
static u64 load64(const unsigned char* y)
{
u64 res = 0;
for(int i = 0; i != 8; ++i)
res |= (u64)(y[i]) << ((7-i) * 8);
return res;
}
The load64 has been implemented by https://reviews.llvm.org/D26149
This patch is trying to implement the store pattern.
Match a pattern where a wide type scalar value is stored by several narrow
stores. Fold it into a single store or a BSWAP and a store if the targets
supports it.
Assuming little endian target:
i8 *p = ...
i32 val = ...
p[0] = (val >> 0) & 0xFF;
p[1] = (val >> 8) & 0xFF;
p[2] = (val >> 16) & 0xFF;
p[3] = (val >> 24) & 0xFF;
>
*((i32)p) = val;
i8 *p = ...
i32 val = ...
p[0] = (val >> 24) & 0xFF;
p[1] = (val >> 16) & 0xFF;
p[2] = (val >> 8) & 0xFF;
p[3] = (val >> 0) & 0xFF;
>
*((i32)p) = BSWAP(val);
Differential Revision: https://reviews.llvm.org/D62897
llvm-svn: 362921
Summary:
Our default behavior is to use sign_extend for signed comparisons and zero_extend for everything else. But for equality we have the freedom to use either extension. If we can prove the input has been truncated from something with enough sign bits, we can use sign_extend instead and let DAG combine optimize it out. A similar rule is used by type legalization in LegalizeIntegerTypes.
This gets rid of the movzx in PR42189. The immediate will still take 4 bytes instead of the 2 bytes plus 0x66 prefix a cmp di, 32767 would get, but it avoids a length changing prefix.
Reviewers: RKSimon, spatel, xbolva00
Reviewed By: xbolva00
Subscribers: hiraditya, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D63032
llvm-svn: 362920
Previously we did the equivalent operation in isel patterns with
COPY_TO_REGCLASS operations to transition. By inserting
scalar_to_vetors and extract_vector_elts before isel we can
allow each piece to be selected individually and accomplish the
same final result.
I ideally we'd use vector operations earlier in lowering/combine,
but that looks to be more difficult.
The scalar-fp-to-i64.ll changes are because we have a pattern for
using movlpd for store+extract_vector_elt. While an f64 store
uses movsd. The encoding sizes are the same.
llvm-svn: 362914
The `icmp sgt`/`icmp sle` variants are, too, miscompiles:
https://rise4fun.com/Alive/JFNPhttps://rise4fun.com/Alive/jHvL
A precondition 'x != 0' was forgotten by me.
While ensuring test coverage for `-1`, also add test coverage
for `0` mask. Mask `0` is allowed for all the folds,
mask `-1` is allowed for all the folds with unsigned `icmp` pred.
Constant mask `0` is missed though.
https://bugs.llvm.org/show_bug.cgi?id=42198
llvm-svn: 362910
This isn't the ideal fix (use FMF on the select), but it's still an
improvement until we have better FMF propagation to selects and other
FP math operators.
I don't think there's much risk of regression from this change by
not including the FMF on the fcmp any more. The nsz/nnan FMF
should be the same on the fcmp and the fneg (fsub) because they
have the same operand.
This works around the most glaring FMF logical inconsistency cited
in PR38086:
https://bugs.llvm.org/show_bug.cgi?id=38086
llvm-svn: 362909
This is another step towards correcting our usage of fast-math-flags when applied on an fcmp.
In this case, we are checking for 'nnan' on the fcmp itself rather than the operand of
the fcmp. But I'm leaving that clause in until we're more confident that we can stop
relying on fcmp's FMF.
By using the more general "isKnownNeverNaN()", we gain a simplification shown on the
tests with 'uitofp' regardless of the FMF on the fcmp (uitofp never produces a NaN).
On the tests with 'fabs', we are now relying on the FMF for the call fabs instruction
in addition to the FMF on the fcmp.
This is a continuation of D62979 / rL362879.
llvm-svn: 362903
This is the second part of the commit fixing PR38917 (hoisting
partitially redundant machine instruction). Most of PRE (partitial
redundancy elimination) and CSE work is done on LLVM IR, but some of
redundancy arises during DAG legalization. Machine CSE is not enough
to deal with it. This simple PRE implementation works a little bit
intricately: it passes before CSE, looking for partitial redundancy
and transforming it to fully redundancy, anticipating that the next
CSE step will eliminate this created redundancy. If CSE doesn't
eliminate this, than created instruction will remain dead and eliminated
later by Remove Dead Machine Instructions pass.
The third part of the commit is supposed to refactor MachineCSE,
to make it more clear and to merge MachinePRE with MachineCSE,
so one need no rely on further Remove Dead pass to clear instrs
not eliminated by CSE.
First step: https://reviews.llvm.org/D54839
Fixes llvm.org/PR38917
This is fixed recommit of r361356 after PowerPC64 multistage build failure.
llvm-svn: 362901
Pointers that are in-bounds (either through dereferenceable_or_null or
thorough a getelementptr inbounds) cannot be captured with a comparison
against null. There is no way to construct a pointer that is still in
bounds but also NULL.
This helps safe languages that insert null checks before load/store
instructions. Without this patch, almost all pointers would be
considered captured even for simple loads. With this patch, an icmp with
null will not be seen as escaping as long as certain conditions are met.
There was a lot of discussion about this patch. See the Phabricator
thread for detals.
Differential Revision: https://reviews.llvm.org/D60047
llvm-svn: 362900
This is 1 step towards correcting our usage of fast-math-flags when applied on an fcmp.
In this case, we are checking for 'nnan' on the fcmp itself rather than the operand of
the fcmp. But I'm leaving that clause in until we're more confident that we can stop
relying on fcmp's FMF.
By using the more general "isKnownNeverNaN()", we gain a simplification shown on the
tests with 'uitofp' regardless of the FMF on the fcmp (uitofp never produces a NaN).
On the tests with 'fabs', we are now relying on the FMF for the call fabs instruction
in addition to the FMF on the fcmp.
I'll update the 'ult' case below here as a follow-up assuming no problems here.
Differential Revision: https://reviews.llvm.org/D62979
llvm-svn: 362879
Types such as float and i64's do not have legal loads in Thumb1, but will still
be loaded with a LDR (or potentially multiple LDR's). As such we can treat the
cost of addressing mode calculations the same as an i32 and get some optimisation
benefits.
Differential Revision: https://reviews.llvm.org/D62968
llvm-svn: 362874
Now with MVE being added, we can add the vector addressing mode costs for it.
These are generally imm7 multiplied by the size of the type being loaded /
stored.
Differential Revision: https://reviews.llvm.org/D62967
llvm-svn: 362873
The fp16 version of VLDR takes a imm8 multiplied by 2. This updates the costs
to account for those, and adds extra testing. It is dependant upon hasFPRegs16
as this is what the load/store instructions require.
Differential Revision: https://reviews.llvm.org/D62966
llvm-svn: 362872
This patch aims to reduce spilling and register moves by using the 3-address
versions of instructions per default instead of the 2-address equivalent
ones. It seems that both spilling and register moves are improved noticeably
generally.
Regalloc hints are passed to increase conversions to 2-address instructions
which are done in SystemZShortenInst.cpp (after regalloc).
Since the SystemZ reg/mem instructions are 2-address (dst and lhs regs are
the same), foldMemoryOperandImpl() can no longer trivially fold a spilled
source register since the reg/reg instruction is now 3-address. In order to
remedy this, new 3-address pseudo memory instructions are used to perform the
folding only when the dst and lhs virtual registers are known to be allocated
to the same physreg. In order to not let MachineCopyPropagation run and
change registers on these transformed instructions (making it 3-address), a
new target pass called SystemZPostRewrite.cpp is run just after
VirtRegRewriter, that immediately lowers the pseudo to a target instruction.
If it would have been possibe to insert a COPY instruction and change a
register operand (convert to 2-address) in foldMemoryOperandImpl() while
trusting that the caller (e.g. InlineSpiller) would update/repair the
involved LiveIntervals, the solution involving pseudo instructions would not
have been needed. This is perhaps a potential improvement (see Phabricator
post).
Common code changes:
* A new hook TargetPassConfig::addPostRewrite() is utilized to be able to run a
target pass immediately before MachineCopyPropagation.
* VirtRegMap is passed as an argument to foldMemoryOperand().
Review: Ulrich Weigand, Quentin Colombet
https://reviews.llvm.org/D60888
llvm-svn: 362868
Summary:
Recompute and update offset/size fields so that we can implement llvm-objcopy options like --only-section.
This patch is the first step and focuses on supporting load commands that covered by existing tests: executable files and
dynamic libraries are not supported.
Reviewers: alexshap, rupprecht, jhenderson
Reviewed By: alexshap, rupprecht
Subscribers: compnerd, jakehehrlich, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D62652
llvm-svn: 362863
Summary:
This fixes the bugzilla id,41862 to support dealing with checking
stop address against start address to support this not being a
proper object to check the disasembly against like gnu objdump
currently does.
Reviewers: jakehehrlich, rupprecht, echristo, jhenderson, grimar
Reviewed By: jhenderson
Subscribers: MaskRay, smeenai, rupprecht, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D61969
Patch by Nicholas Krause!
llvm-svn: 362847
Displays the architecture names of an input file.
Unknown architectures are represented by unknown(cputype,cpusubtype).
Patch by Anusha Basana <anusha.basana@gmail.com>
Differential Revision: https://reviews.llvm.org/D62753
llvm-svn: 362840
This implements the functionality described in
https://lld.llvm.org/Partitions.html. It works as follows:
- Reads the section headers using the ELF header at file offset 0;
- If extracting a loadable partition:
- Finds the section containing the required partition ELF header by looking it up in the section table;
- Reads the ELF and program headers from the section.
- If extracting the main partition:
- Reads the ELF and program headers from file offset 0.
- Filters the section table according to which sections are in the program headers that it read:
- If ParentSegment != nullptr or section is not SHF_ALLOC, then it goes in.
- Sections containing partition ELF headers or program headers are excluded as there are no headers for these in ordinary ELF files.
Differential Revision: https://reviews.llvm.org/D62364
llvm-svn: 362818
llvm-lib now needs a `target triple` for bitcode, so add a new file
that's like trivial.ll but has one, and use that in the test.
(trivial.ll had a comment that looked like it wasn't supposed to be used
in tests directly, so I don't want to change that file.)
llvm-svn: 362809
When we call checkResourceLimit in bumpCycle or bumpNode, and we
know the resource count has just reached the limit (the equations
are equal). We should return true to mark that we are resource
limited for next schedule, or else we might continue to schedule
in favor of latency for 1 more schedule and create a schedule that
actually overbook the resource.
When we call checkResourceLimit to estimate the resource limite before
scheduling, we don't need to return true even if the equations are
equal, as it shouldn't limit the schedule for it .
Differential Revision: https://reviews.llvm.org/D62345
llvm-svn: 362805
lib.exe doesn't allow creating .lib files with object files that have
differing machine types. Update llvm-lib to match.
The motivation is to make it possible to infer the machine type of a
.lib file in lld, so that it can warn when e.g. a 32-bit .lib file is
passed to a 64-bit link (PR38965).
Fixes PR38782.
Differential Revision: https://reviews.llvm.org/D62913
llvm-svn: 362798
This is a potentially large perf win for AVX1 targets because of the way we
auto-vectorize to 256-bit but then expect the backend to legalize/optimize
for the half-implemented AVX1 ISA.
On the motivating example from PR37428 (even though this patch doesn't solve
the vector shift issue):
https://bugs.llvm.org/show_bug.cgi?id=37428
...there's a 16% speedup when compiling with "-mavx" (perf tested on Haswell)
because we eliminate the remaining 256-bit vblendv ops.
I added comments on a couple of tests that require further work. If we have
256-bit logic ops separating the vselect and extract, we should probably narrow
everything to 128-bit, but that requires a larger pattern match.
Differential Revision: https://reviews.llvm.org/D62969
llvm-svn: 362797
Summary:
This allows some integer bitwise operations to instead be performed by
hardware fp instructions. This is correct because the RISC-V spec
requires the F and D extensions to use the IEEE-754 standard
representation, and fp register loads and stores to be bit-preserving.
This is tested against the soft-float ABI, but with hardware float
extensions enabled, so that the tests also ensure the optimisation also
fires in this case.
Reviewers: asb, luismarques
Reviewed By: asb
Subscribers: hiraditya, rbar, johnrusso, simoncook, apazos, sabuasal, niosHD, kito-cheng, shiva0217, jrtc27, zzheng, edward-jones, rogfer01, MartinMosbeck, brucehoult, the_o, rkruppe, PkmX, jocewei, psnobl, benna, Jim, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D62900
llvm-svn: 362790
Summary:
This patch fixes a bug in the assembler that permitted a type suffix on
predicate registers when not expected. For instance, the following was
previously valid:
faddv h0, p0.q, z1.h
This bug was present in all SVE instructions containing predicates with
no type suffix and no predication form qualifier, i.e. /z or /m. The
latter instructions are already caught with an appropiate error message
by the assembler, e.g.:
.text
<stdin>:1:13: error: not expecting size suffix
cmpne p1.s, p0.b/z, z2.s, 0
^
A similar issue for SVE vector registers was fixed in:
https://reviews.llvm.org/D59636
Reviewed By: SjoerdMeijer
Differential Revision: https://reviews.llvm.org/D62942
llvm-svn: 362780
This is https://bugs.llvm.org/show_bug.cgi?id=42122.
If an object file has a size less than program header's file [offset + size]
(i.e. if we have overflow), llvm-objcopy crashes instead of reporting a
error.
The patch fixes this issue.
Differential revision: https://reviews.llvm.org/D62898
llvm-svn: 362778
Patch which introduces a target-independent framework for generating
hardware loops at the IR level. Most of the code has been taken from
PowerPC CTRLoops and PowerPC has been ported over to use this generic
pass. The target dependent parts have been moved into
TargetTransformInfo, via isHardwareLoopProfitable, with
HardwareLoopInfo introduced to transfer information from the backend.
Three generic intrinsics have been introduced:
- void @llvm.set_loop_iterations
Takes as a single operand, the number of iterations to be executed.
- i1 @llvm.loop_decrement(anyint)
Takes the maximum number of elements processed in an iteration of
the loop body and subtracts this from the total count. Returns
false when the loop should exit.
- anyint @llvm.loop_decrement_reg(anyint, anyint)
Takes the number of elements remaining to be processed as well as
the maximum numbe of elements processed in an iteration of the loop
body. Returns the updated number of elements remaining.
llvm-svn: 362774
We should keep the symbol type (STT_GNU_IFUNC) for a local ifunc because
it may result in an IRELATIVE reloc that the dynamic loader will use to
resolve the address at startup time.
There is another problem that is not fixed by this patch: a PC relative
relocation should also create a relocation with the ifunc symbol.
llvm-svn: 362767
Use the PPC vector min/max instructions for computing the corresponding
operation as these should be faster than the compare/select sequences
we currently emit.
Differential revision: https://reviews.llvm.org/D47332
llvm-svn: 362759
SIInsertSkips really doesn't understand the control flow, and makes
very stupid assumptions about the block layout. This was able to get
away with not skipping return blocks, since usually after
structurization there is only one placed at the end of the
function. Tail duplication can break this assumption.
llvm-svn: 362754
Incorrect Debug Variable Range was calculated while "COMPUTING LIVE DEBUG VARIABLES" stage.
Range for Debug Variable("i") computed according to current state of instructions
inside of basic block. But Register Allocator creates new instructions which were not taken
into account when Live Debug Variables computed. In the result DBG_VALUE instruction for
the "i" variable was put after these newly inserted instructions. This is incorrect.
Debug Value for the loop counter should be inserted before any loop instruction.
Differential Revision: https://reviews.llvm.org/D62650
llvm-svn: 362750
"Divergence driven ISel. Assign register class for cross block values
according to the divergence."
that discovered the design flaw leading to several issues that
required to be solved before.
This change reverts AMDGPU specific changes and keeps common part
unaffected.
llvm-svn: 362749
This primarily affects add/fadd/mul/fmul/and/or/xor/pmuludq/pmuldq/max/min/fmaxc/fminc/pmaddwd/pavg.
We already commuted the unmasked and zero masked versions.
I've added 512-bit stack folding tests for most of the instructions
affected. I've tested needing commuting and not commuting across
unmasked, merged masked, and zero masked. The 128/256 bit instructions
should behave similarly.
llvm-svn: 362746
Summary:
(1) Function descriptor on AIX
On AIX, a called routine may have 2 distinct symbols associated with it:
* A function descriptor (Name)
* A function entry point (.Name)
The descriptor structure on AIX is the same as those in the ELF V1 ABI:
* The address of the entry point of the function.
* The TOC base address for the function.
* The environment pointer.
The descriptor symbol uses the same name as the source level function in C.
The function entry point is analogous to the symbol we would generate for a
function in a non-descriptor-based ABI, except that it is renamed by
prepending a ".".
Which symbol gets referenced depends on the context:
* Taking the address of the function references the descriptor symbol.
* Calling the function references the entry point symbol.
(2) Speaking of implementation on AIX, for direct function call target, we
create proper MCSymbol SDNode(e.g . ".foo") while constructing SDAG to
replace original TargetGlobalAddress SDNode. Then down the path, we can
take advantage of this MCSymbol.
Patch by: Xiangling_L
Reviewed by: sfertile, hubert.reinterpretcast, jasonliu, syzaara
Differential Revision: https://reviews.llvm.org/D62532
llvm-svn: 362735
This adds support for unary fneg based on the implementation of BinaryOperator without the soft float FP cost.
Previously we would just delegate to visitUnaryInstruction. I think the only real change is that we will pass the FastMath flags to SimplifyFNeg now.
Differential Revision: https://reviews.llvm.org/D62699
llvm-svn: 362732
This is a really silly bug that even a simple test w/an unconditional latch would have caught. I tried to guard against the case, but put it in the wrong if check. Oops.
llvm-svn: 362727
This patch is the first step towards ensuring MergeConsecutiveStores correctly handles non-temporal loads\stores:
1 - When merging load\stores we must ensure that they all have the same non-temporal flag. This is unlikely to occur, but can in strange cases where we're storing at the end of one page and the beginning of another.
2 - The merged load\store node must retain the non-temporal flag.
Differential Revision: https://reviews.llvm.org/D62910
llvm-svn: 362723
Summary:
This patch implements SDAG call lowering on AIX for functions
which only have parameters that could fit into GPRs.
Reviewers: hubert.reinterpretcast, syzaara
Differential Revision: https://reviews.llvm.org/D62823
llvm-svn: 362708
Summary:
This patch is part of a patch series to add support for FileCheck
numeric expressions. This specific patch introduces support for defining
numeric variable in a CHECK directive.
This commit introduces support for defining numeric variable from a
litteral value in the input text. Numeric expressions can then use the
variable provided it is on a later line.
Copyright:
- Linaro (changes up to diff 183612 of revision D55940)
- GraphCore (changes in later versions of revision D55940 and
in new revision created off D55940)
Reviewers: jhenderson, chandlerc, jdenny, probinson, grimar, arichardson, rnk
Subscribers: hiraditya, llvm-commits, probinson, dblaikie, grimar, arichardson, tra, rnk, kristina, hfinkel, rogfer01, JonChesterfield
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D60386
llvm-svn: 362705
This patch implements the "CREATE_THIN" MRI script command, allowing thin archives to be created via MRI scripts.
Differential Revision: https://reviews.llvm.org/D62919
llvm-svn: 362704
This patch is a follow up for D62018 to add lrint/llrint
support for float16.
Reviewed By: SjoerdMeijer
Differential Revision: https://reviews.llvm.org/D62863
llvm-svn: 362700
This patch is a follow up for D61391 to add lround/llround
support for float16.
Reviewed By: SjoerdMeijer
Differential Revision: https://reviews.llvm.org/D62861
llvm-svn: 362698
If the given SCEVExpr has no (un)signed flags attached to it, transfer
these to the resulting instruction or use them to find an existing
instruction.
Differential Revision: https://reviews.llvm.org/D61934
llvm-svn: 362687
We already get support for G_ZEXTLOAD to s32 from the importer, but it can't
deal with the SUBREG_TO_REG in the pattern. Tweaking the existing manual
selection code for G_LOAD to handle an additional SUBREG_TO_REG when dealing
with G_ZEXTLOAD isn't much work.
Also add tests to check the imported pattern selections to s32 work.
llvm-svn: 362681
This is intended to enable the use of an immediate blend or
more optimal instruction. But if the passthru is zero we don't
need any additional instructions.
llvm-svn: 362675
avx/avx2 masked loads only support all zeros for passthru in hardware.
So we have to emit a blend for all other values. We have an optimization
that tries to optimize this blend if the mask is constant. But we
don't need to perform this optimization if the passthru value is zero
which doesn't need the blend at all.
llvm-svn: 362674
When looking through copies, make sure to not try to find the vreg def of a physreg.
Normally getVRegDef will return nullptr in this case, but if there happens to be
multiple defs then it will assert.
This fixes PR42129.
llvm-svn: 362666
This forced the caller to be aware of this, which is an ugly ABI
feature.
Partially reverts r295877. The original reasons for doing this are
mostly fixed. Alloca is now in a non-0 address space, so it should be
OK to have 0 as a valid pointer. Since we treat the absolute address
as the pointer value, this part only really needed to apply to
kernels.
Since r357093, we avoid the need to increment/decrement the offset
register in more cases, and since r354816 the scavenger can fail
without spilling, so it's less critical that we try to avoid an offset
that fits in the MUBUF offset.
Restrict to callable functions for now to split this into 2 steps to
limit thte number of test updates and in case anything breaks.
llvm-svn: 362665
The ISD::STRICT_ nodes used to implement the constrained floating-point
intrinsics are currently never passed to the target back-end, which makes
it impossible to handle them correctly (e.g. mark instructions are depending
on a floating-point status and control register, or mark instructions as
possibly trapping).
This patch allows the target to use setOperationAction to switch the action
on ISD::STRICT_ nodes to Legal. If this is done, the SelectionDAG common code
will stop converting the STRICT nodes to regular floating-point nodes, but
instead pass the STRICT nodes to the target using normal SelectionDAG
matching rules.
To avoid having the back-end duplicate all the floating-point instruction
patterns to handle both strict and non-strict variants, we make the MI
codegen explicitly aware of the floating-point exceptions by introducing
two new concepts:
- A new MCID flag "mayRaiseFPException" that the target should set on any
instruction that possibly can raise FP exception according to the
architecture definition.
- A new MI flag FPExcept that CodeGen/SelectionDAG will set on any MI
instruction resulting from expansion of any constrained FP intrinsic.
Any MI instruction that is *both* marked as mayRaiseFPException *and*
FPExcept then needs to be considered as raising exceptions by MI-level
codegen (e.g. scheduling).
Setting those two new flags is straightforward. The mayRaiseFPException
flag is simply set via TableGen by marking all relevant instruction
patterns in the .td files.
The FPExcept flag is set in SDNodeFlags when creating the STRICT_ nodes
in the SelectionDAG, and gets inherited in the MachineSDNode nodes created
from it during instruction selection. The flag is then transfered to an
MIFlag when creating the MI from the MachineSDNode. This is handled just
like fast-math flags like no-nans are handled today.
This patch includes both common code changes required to implement the
new features, and the SystemZ implementation.
Reviewed By: andrew.w.kaylor
Differential Revision: https://reviews.llvm.org/D55506
llvm-svn: 362663
Since the beginning, the offset of a frame index has been consistently
interpreted backwards. It was treating it as an offset from the
scratch wave offset register as a frame register. The correct
interpretation is the offset from the SP on entry to the function,
before the prolog. Frame index elimination then should select either
SP or another register as an FP.
Treat the scratch wave offset on kernel entry as the pre-incremented
SP. Rely more heavily on the standard hasFP and frame pointer
elimination logic, and clean up the private reservation code. This
saves a copy in most callee functions.
The kernel prolog emission code is still kind of a mess relying on
checking the uses of physical registers, which I would prefer to
eliminate.
Currently selection directly emits MUBUF instructions, which require
using a reference to some register. Use the register chosen for SP,
and then ignore this later. This should probably be cleaned up to use
pseudos that don't refer to any specific base register until frame
index elimination.
Add a workaround for shaders using large numbers of SGPRs. I'm not
sure these cases were ever working correctly, since as far as I can
tell the logic for figuring out which SGPR is the scratch wave offset
doesn't match up with the shader input initialization in the shader
programming guide.
llvm-svn: 362661
The AllConstant check needs to be moved out of the if/else if chain to
avoid a test regression. The "there is no SimplifyZExt" comment
puzzles me, since there is SimplifyCastInst. Additionally, the
Simplify* calls seem to not see the operand as constant, so this needs
to be tried if the simplify failed.
llvm-svn: 362653
When the byval attribute has a type, it must match the pointee type of
any parameter; but InstCombine was not updating the attribute when
folding casts of various kinds away.
llvm-svn: 362643
The current PIC support currently only works with Emscripten, so
disable it for other targets.
This is the PIC portion of https://reviews.llvm.org/D62542.
Reviewed By: dschuff, sbc100
llvm-svn: 362638
As far as I know these should be freely reassociatable just like
the floating point MAXC/MINC instructions.
The *reduce* test changes are largely regressions and caused by
the "generic" CPU we default to not having a scheduler model.
The machine-combiner-int-vec.ll test shows the positive benefits
of this change.
Differential Revision: https://reviews.llvm.org/D62787
llvm-svn: 362629
As suggested in D62498 - collectConcatOps() matches both
concat_vectors and insert_subvector patterns, and we see
more test improvements by using the more general match.
llvm-svn: 362620
This patch fixes a regression caused by the operand reordering refactoring patch https://reviews.llvm.org/D59973 .
The fix changes the strategy to Splat instead of Opcode, if broadcast opportunities are found.
Please see the lit test for some examples.
Committed on behalf of @vporpo (Vasileios Porpodas)
Differential Revision: https://reviews.llvm.org/D62427
llvm-svn: 362613
We have a few sections that can be added implicitly to the output:
".dynsym", ".dynstr", ".symtab", ".strtab" and ".shstrtab".
Problem appears when such section is listed explicitly in YAML.
In that case it's content is written twice:
first time during writing of regular sections listed in the document
and second time during special handling.
Because of that their file offsets can become unexpectedly broken:
(yaml file for sample below lists .dynsym explicitly before .text.foo)
Before patch:
[Nr] Name Type Address Offset
Size EntSize Flags Link Info Align
[ 0] NULL 0000000000000000 00000000
0000000000000000 0000000000000000 0 0 0
[ 1] .dynsym DYNSYM 0000000000000100 00000250
0000000000000030 0000000000000018 A 6 0 8
[ 2] .text.foo PROGBITS 0000000000000200 00000200
0000000000000000 0000000000000000 AX 0 0 0
After patch:
Section Headers:
[Nr] Name Type Address Offset
Size EntSize Flags Link Info Align
[ 0] NULL 0000000000000000 00000000
0000000000000000 0000000000000000 0 0 0
[ 1] .dynsym DYNSYM 0000000000000100 00000200
0000000000000030 0000000000000018 A 6 0 8
[ 2] .text.foo PROGBITS 0000000000000200 00000230
0000000000000000 0000000000000000 AX 0 0 0
This patch reorganizes our code and fixes the issue described.
Differential revision: https://reviews.llvm.org/D62809
llvm-svn: 362602
We already handle the case where we combine shuffle(extractsubvector(x),extractsubvector(x)), this relaxes the requirement to permit different sources as long as they have the same value type.
This causes a couple of cases where the VPERMV3 binary shuffles occur at a wider width than before, which I intend to improve in future commits - but as only the subvector's mask indices are defined, these will broadcast so we don't see any increase in constant size.
llvm-svn: 362599
This reverts commit 5b32f60ec3.
The fix is in commit 4f9e68148b.
This patch fixes the CorrelatedValuePropagation pass to keep
prof branch_weights metadata of SwitchInst consistent.
It makes use of SwitchInstProfUpdateWrapper.
New tests are added.
Reviewed By: nikic
Differential Revision: https://reviews.llvm.org/D62126
llvm-svn: 362583
NOTE: Note that no attributes are derived yet. This patch will not go in
alone but only with others that derive attributes. The framework is
split for review purposes.
This commit introduces the Attributor pass infrastructure and fixpoint
iteration framework. Further patches will introduce abstract attributes
into this framework.
In a nutshell, the Attributor will update instances of abstract
arguments until a fixpoint, or a "timeout", is reached. Communication
between the Attributor and the abstract attributes that are derived is
restricted to the AbstractState and AbstractAttribute interfaces.
Please see the file comment in Attributor.h for detailed information
including design decisions and typical use case. Also consider the class
documentation for Attributor, AbstractState, and AbstractAttribute.
Reviewers: chandlerc, homerdin, hfinkel, fedor.sergeev, sanjoy, spatel, nlopes, nicholas, reames
Subscribers: mehdi_amini, mgorny, hiraditya, bollu, steven_wu, dexonsmith, dang, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D59918
llvm-svn: 362578
This commit is a preparation of upcoming patches on attribute deduction.
It will shorten the diffs and make it clear what we inferred before.
Reviewers: chandlerc, homerdin, hfinkel, fedor.sergeev, sanjoy, spatel, nlopes
Subscribers: bollu, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D59903
llvm-svn: 362577
Generally speaking, we lower to an optimal rotate sequence for nodes visible in
the SDAG. However, there are instances where the two rotates are not visible at
ISEL time - most notably those in a very common sequence when lowering switch
statements to jump tables.
A common situation is a switch on a 32-bit integer. This value has to have the
upper 32 bits cleared and because jump table offsets are word offsets, the value
needs to be shifted left by 2 bits. We currently emit the clear and the left
shift as two separate instructions, but this is not needed as we can lower it to
a single RLDIC.
This patch just cleans that up.
Differential revision: https://reviews.llvm.org/D60402
llvm-svn: 362576
NFC commit of a test case in order for the subsequent review to show differences
in codegen.
Differential revision: https://reviews.llvm.org/D62843
llvm-svn: 362573
In glibc, DT_PPC_GOT indicates that PowerPC32 Secure PLT ABI is used.
I plan to use it in D62464.
DT_PPC_OPT currently indicates if a TLSDESC inspired TLS optimization is
enabled.
Reviewed By: grimar, jhenderson, rupprecht
Differential Revision: https://reviews.llvm.org/D62851
llvm-svn: 362569
Although we had the support in the prelegalizer combiner to generate the
G_SEXTLOAD or G_ZEXTLOAD ops, the legalizer definitions for arm64 had them as
lowering back to separate ops.
llvm-svn: 362553
Summary:
Adjusts the index and adds a bitcast around the vector operand of
EXTRACT_VECTOR_ELT so that its lane type matches the source type of
its parent sext_inreg. Without this bitcast the ISel patterns do not
match and ISel fails.
Reviewers: aheejin
Subscribers: dschuff, sbc100, jgravelle-google, hiraditya, sunfish, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D62646
llvm-svn: 362547
Summary:
An argument that is return by a function but bit-casted before can still
be annotated as "returned". Make sure we do not crash for this case.
Reviewers: sunfish, stephenwlin, niravd, arsenm
Subscribers: wdng, hiraditya, bollu, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D59917
llvm-svn: 362546
- The loop in demangleFunctionParameterList() only exits
on Error, @, and Z. All 3 cases were handled, so the
rest of the function is DEMANGLE_UNREACHABLE.
- The loop in demangleTemplateParameterList() always returns
on Error, so there's no need to check for that in the loop
header and after the loop.
- Add test cases for invalid function parameter manglings.
- Add a (redundant) test case for a simple template parameter
list mangling.
- Add a test case pointing out that varargs functions aren't
demangled correctly.
llvm-svn: 362540
Summary:
Following the cleanup in D48202, method foldBlockIntoPredecessor has the
same behavior. Replace its uses with MergeBlockIntoPredecessor.
Remove foldBlockIntoPredecessor.
Reviewers: chandlerc, dmgreen
Subscribers: jlebar, javed.absar, zzheng, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D62751
llvm-svn: 362538
This is a special case of a more general transform (not (sub Y, X)) -> (add X, ~Y). InstCombine knows the general form. I've restricted to the special case to fix the motivating case PR42118. I tried handling any case where Y was constant, but got some changes on some Mips tests that I couldn't quickly prove where beneficial.
Fixes PR42118
Differential Revision: https://reviews.llvm.org/D62828
llvm-svn: 362533
Oddly, I had to change a value name from "tmp0" to "bc0" to get the autogened test to pass. I'm putting this down to an oddity of update_test_checks or FileCheck, but don't understand it.
llvm-svn: 362532
This shows up as a side issue to the main problem for the AVX target example from PR37428:
https://bugs.llvm.org/show_bug.cgi?id=37428 - https://godbolt.org/z/7tpRa3
But as we can see in the pile of existing test diffs, it's actually a widespread problem
that affects any AVX or later target. Apart from a couple of oddballs, I think these are
all improvements for the reasons stated in the code comment: we do not want to enable YMM
unnecessarily (avoid vzeroupper and frequency throttling) and some cores split 256-bit
stores anyway.
We could say that MergeConsecutiveStores() is going overboard on some of these examples,
but that won't solve the problem completely. But that is a reason I'm proposing this as
a lowering rather than a combine: we will infinite loop fighting the merge code if we try
this earlier.
Differential Revision: https://reviews.llvm.org/D62498
llvm-svn: 362524
Arm Architecture v8.5a introduces Branch Target Identification (BTI). When
enabled all indirect branches must target a bti instruction of the
appropriate form. As PLT sequences may sometimes be the target of an
indirect branch and PLT[0] always is, a static linker may need to generate
PLT sequences that contain "bti c" as the first instruction. In effect:
bti c
adrp x16, page offset to .got.plt
...
Instead of:
adrp x16, page offset to .got.plt
...
At present the PLT decoding assumes the adrp will always be the first
instruction. This patch adds support for a single "bti c" to prefix it. A
test binary has been uploaded with such a PLT sequence. A forthcoming LLD
patch will make heavy use of the PLT decoding code.
Differential Revision: https://reviews.llvm.org/D62598
llvm-svn: 362523
- For error returns in demangleSpecialTableNode(),
demangleLocalStaticGuard(), RTTITypeDescriptor,
demangleRttiBaseClassDescriptorNode(), demangleUnsigned(),
demangleUntypedVariable() (via RttiBaseClassArray)
- For ?_A and ?_P which are handled at early levels of the
demangler but are not implemented in a later stage; this
is now more obvious
- Replace a "default:" with an explicit list of cases, to
get -Wswitch check we list all cases
llvm-svn: 362520
The underlying ConstantRange functionality has been added in D60952,
D61207 and D61238, this just exposes it for LVI.
I'm switching the code from using a whitelist to a blacklist, as
we're down to one unsupported operation here (xor) and writing it
this way seems more obvious :)
Differential Revision: https://reviews.llvm.org/D62822
llvm-svn: 362519
- Add test coverage around invalid anon namespaces and
for error paths in demanglePrimitiveType() and in
demangleFullyQualifiedTypeName()
- Use DEMANGLE_UNREACHABLE in two more unreachable places
llvm-svn: 362514
One way of using llvm-symbolizer is to interactively within a process
write a line from a parent process to llvm-symbolizer's stdin, and then
read the output, then write the next line, read, etc. This worked as
long as all the lines were good. However, this didn't work prior to this
patch if any of the inputs were bad inputs, because the output is not
flushed after a bad input, meaning the parent process is sat waiting for
output, whilst llvm-symbolizer is sat waiting for input. This patch
flushes the output after every invocation of symbolizeInput when reading
from stdin. It also removes unnecessary flushing when llvm-symbolizer is
not reading addresses from stdin, which should give a slight performance
boost in these situations.
Reviewed by: ikudrin
Differential Revision: https://reviews.llvm.org/D62371
llvm-svn: 362511
This is to address some of the problems in existing P9 resource modeling,
especially about the dispatching rules.
Instead of using a hypothetical DISPATCHER , we try to use the number of
actual dispatch slots, and define SchedWriteRes to model dispatch rules,
then update instruction classes according to dispatch rules.
All the dispatch rules and instruction classes update are made according
to POWER9 User Manual.
Differential Revision: https://reviews.llvm.org/D61873
llvm-svn: 362509
The proposal in D62498 showed that x86 would benefit from vector
store splitting, but that may conflict with the generic DAG
combiner's store merging transforms.
Add memory type to the existing TLI hook that enables the merging
transforms, so we can limit those changes to scalars only for x86.
llvm-svn: 362507
- Replace `Error = true` in a few branches that are truly unreachable
with DEMANGLE_UNREACHABLE
- Remove early return early in startsWithLocalScopePattern() because
it's redundant with the next two early returns
- Remove unreachable `case '0'` (it's handled in the branch below)
- Remove an unused bool return
- Add test coverage for several early error returns, mostly in
array type parsing
llvm-svn: 362506
Even if one bit is defined, the code is not clear what it is suppose to do.
The test wants to assert that some bits are undef, but that's not what the IR does and I don't think it's even possible to do that in any meaningful way. It was added in D12497, so @reames might want to double check.
Differential Revision: https://reviews.llvm.org/D60859
llvm-svn: 362499
ELF for the 64-bit Arm Architecture defines two processor-specific dynamic
tags:
DT_AARCH64_BTI_PLT 0x70000001, d_val
DT_AARCH64_PAC_PLT 0x70000003, d_val
These presence of these tags indicate that PLT sequences have been
protected using Branch Target Identification and Pointer Authentication
respectively. The presence of both indicates that the PLT sequences have
been protected with both Branch Target Identification and Pointer
Authentication.
This patch adds the tags and tests for llvm-readobj and yaml2obj.
As some of the processor specific dynamic tags overlap, this patch splits
them up, keeping their original default value if they were not previously
mentioned explicitly in a switch case.
Differential Revision: https://reviews.llvm.org/D62596
llvm-svn: 362493
ELF for the 64-bit Arm Architecture defines a processor specific property
type GNU_PROPERTY_AARCH64_FEATURE_1_AND as GNU_PROPERTY_LOPROC. This
property works in a similar way to the existing X86 processor specific
property GNU_PROPERTY_GNU_X86_FEATURE_1_AND.
Two feature bits are defined for GNU_PROPERTY_AARCH64_FEATURE_1_AND:
- GNU_PROPERTY_AARCH64_FEATURE_1_BTI 0x1
- GNU_PROPERTY_AARCH64_FEATURE_1_PAC 0x2
This patch defines the property, feature bits and implements support for
printing in llvm-readobj.
Differential Revision: https://reviews.llvm.org/D62595
llvm-svn: 362490
Summary:
This *might* be the last fold for `sink-addsub-of-const.ll`, but i'm not sure yet.
As far as i can tell, there are no regressions here (ignoring x86-32),
all changes are either good or neutral.
This, almost surprisingly to me, fixes the motivational tests (in `shift-amount-mod.ll`)
`@reg32_lshr_by_sub_from_negated` from [[ https://bugs.llvm.org/show_bug.cgi?id=41952 | PR41952 ]].
https://rise4fun.com/Alive/vMd3
Reviewers: RKSimon, t.p.northover, craig.topper, spatel, efriedma
Reviewed By: RKSimon
Subscribers: sdardis, javed.absar, arichardson, kristof.beyls, jrtc27, atanasyan, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D62774
llvm-svn: 362488
As I mentioned on D61887 we don't get many hits on ComputeNumSignBits as we did on computeKnownBits.
The case we do get is interesting though - it allows us to use the 'ConditionalNegate' combine in combineLogicBlendIntoPBLENDV to remove a select.
It comes too late for SSE41 (BLENDV) cases, but SSE2 tests can hit it now. We should probably try to make use of this for SSE41+ targets as well - avoiding variable blends is usually a good idea. I'll investigate as a followup.
Differential Revision: https://reviews.llvm.org/D62777
llvm-svn: 362486
Includes a fix for an introduced build failure due to a post c++11 use of std::mismatch.
This fixes some thin archive relative path issues, paths are shortened where possible and paths are output correctly when using the display table command.
Differential Revision: https://reviews.llvm.org/D59491
llvm-svn: 362484
This change adds two FP16 extraction and two insertion patterns
(one per possible vector length).
Extractions are handled by copying a Q/D register into one of VFP2
class registers, where single FP32 sub-registers can be accessed. Then
the extraction of even lanes are simple sub-register extractions
(because we don't care about the top parts of registers for FP16
operations). Odd lanes need an additional VMOVX instruction.
Unfortunately, insertions cannot be handled in the same way, because:
* There is no instruction to insert FP16 into an even lane (VINS only
works with odd lanes)
* The patterns for odd lanes will have a form of a DAG (not a tree),
and will not be implementable in pure tablegen
Because of this insertions are handled in the same way as 16-bit
integer insertions (with conversions between FP registers and GPRs
using VMOVHR instructions).
Without these patterns the ARM backend would sometimes fail during
instruction selection.
This patch also adds patterns which combine:
* an FP16 element extraction and a store into a single VST1
instruction
* an FP16 load and insertion into a single VLD1 instruction
Differential Revision: https://reviews.llvm.org/D62651
llvm-svn: 362482
This opportunity is found from spec 2017 557.xz_r. And it is used by the sha encrypt/decrypt. See sha-2/sha512.c
static void store64(u64 x, unsigned char* y)
{
for(int i = 0; i != 8; ++i)
y[i] = (x >> ((7-i) * 8)) & 255;
}
static u64 load64(const unsigned char* y)
{
u64 res = 0;
for(int i = 0; i != 8; ++i)
res |= (u64)(y[i]) << ((7-i) * 8);
return res;
}
The load64 has been implemented by https://reviews.llvm.org/D26149
This patch is trying to implement the store pattern.
Match a pattern where a wide type scalar value is stored by several narrow
stores. Fold it into a single store or a BSWAP and a store if the targets
supports it.
Assuming little endian target:
i8 *p = ...
i32 val = ...
p[0] = (val >> 0) & 0xFF;
p[1] = (val >> 8) & 0xFF;
p[2] = (val >> 16) & 0xFF;
p[3] = (val >> 24) & 0xFF;
>
*((i32)p) = val;
i8 *p = ...
i32 val = ...
p[0] = (val >> 24) & 0xFF;
p[1] = (val >> 16) & 0xFF;
p[2] = (val >> 8) & 0xFF;
p[3] = (val >> 0) & 0xFF;
>
*((i32)p) = BSWAP(val);
Differential Revision: https://reviews.llvm.org/D61843
llvm-svn: 362472
The family of 32-bit Thumb instruction encodings that include t2ORR,
t2AND and t2EOR are all listed in the ArmARM as having (0) in bit 15.
The Tablegen descriptions of those instructions listed them as ?. This
change tightens that up by making them into 0 + Unpredictable.
In the specific case of t2ORR, we tighten it up still further by
making the zero bit mandatory. This change comes from Arm v8.1-M, in
which encodings with that bit equal to 1 will now be used for
different instructions.
Reviewers: dmgreen, samparker, SjoerdMeijer, efriedma
Reviewed By: dmgreen, efriedma
Subscribers: efriedma, javed.absar, kristof.beyls, hiraditya, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D60705
llvm-svn: 362470
This is something of a workaround, and the state of stack realignment
controls is kind of a mess. Ideally, we would be able to specify the
stack is infinitely aligned on entry to a kernel.
TargetFrameLowering provides multiple controls which apply at
different points. The StackRealignable field is used during
SelectionDAG, and for some reason distinct from this
hook. StackAlignment is a single field not dependent on the
function. It would probably be better to make that dependent on the
calling convention, and the maximum value for kernels.
Currently this doesn't really change anything, since the frame
lowering mostly does its own thing. This helps avoid regressions in a
future change which will rely more heavily on hasFP.
llvm-svn: 362447
Instead of emitting all of the test stuff for a compare when it's only used by
a select, instead, just emit the compare + select. The select will use the
value of NZCV correctly, so we don't need to emit all of the test instructions
etc.
For now, only support fp selects which use G_FCMP. Also only support condition
codes which will only require one select to represent.
Also add a test.
Differential Revision: https://reviews.llvm.org/D62695
llvm-svn: 362446
r362199 fixed it for zero masking, but not zero masking. The load
folding in the peephole pass hid the bug. This patch turns off
the peephole pass on the relevant test to ensure coverage.
llvm-svn: 362440
Summary: This change facilitates propagating fmf which was placed on setcc from fcmp through folds with selects so that back ends can model this path for arithmetic folds on selects in SDAG.
Reviewers: qcolombet, spatel
Reviewed By: qcolombet
Subscribers: nemanjai, jsji
Differential Revision: https://reviews.llvm.org/D62552
llvm-svn: 362439
We currently miss the opportunities for optmizing comparisons in the peephole
optimizer if the input is the result of a COPY since we look for record-form
versions of the producing instruction.
This patch simply lets the optimization peek through copies.
Differential revision: https://reviews.llvm.org/D59633
llvm-svn: 362438
For some reason multiple places need to do this, and the variant the
loop unroller and inliner use was not handling it.
Also, introduce a new wrapper to be slightly more precise, since on
AMDGPU some addrspacecasts are free, but not no-ops.
llvm-svn: 362436
This patch fixes a problem that occurs in LowerSwitch when a switch statement has a PHI node as its condition, and the PHI node only has two incoming blocks, and one of those incoming blocks is through an unreachable default in the switch statement. When this condition occurs, LowerSwitch holds a pointer to the condition value, but removes the switch block as a predecessor of the PHI block, causing the PHI node to be replaced. LowerSwitch then tries to use its stale pointer to the original condition value, causing a crash.
Differential Revision: https://reviews.llvm.org/D62560
llvm-svn: 362427
(Recommit after fixing a keymash in the run line. Sorry for breakage.)
This is preparation for D62625 <https://reviews.llvm.org/D62625>
llvm-svn: 362426
This reverts commit r362407. It broke compilation of
llvm/lib/Object/ArchiveWriter.cpp:
error: type 'llvm::sys::path::const_iterator' does not provide a call
operator
llvm-svn: 362413
This fixes some thin archive relative path issues, paths are shortened where possible and paths are output correctly when using the display table command.
Differential Revision: https://reviews.llvm.org/D59491
llvm-svn: 362407
Remove the test checking error message for 'is a directory'. It does
not seem to serve any real purpose, and it relies on matching platform
error strings which are unpredictable and makes the test fragile.
Furthermore, it fails on NetBSD where read() works on directories,
and therefore does not return EISDIR at all.
Fixes r362141.
Differential Revision: https://reviews.llvm.org/D62773
llvm-svn: 362404
We were missing this fold in the DAG, which I've copied directly from llvm::ConstantFoldCastInstruction
Differential Revision: https://reviews.llvm.org/D62807
llvm-svn: 362397
Summary:
This patch adds tests for directives .arch, .arch_extension and .cpu for
all features defined in Arm SVE2 architecture extension.
Reviewed By: chill
Differential Revision: https://reviews.llvm.org/D62602
llvm-svn: 362378
gnu-sections.test currently use relocs.obj.elf-x86_64 and
relocs.obj.elf-i386 precompiled objects as an inputs.
These inputs actually initially were introduced to test the
dump of relocations and have almost nothing common with dumping
sections.
Patch converts the test to use yaml2obj. That allows to remove
relocs.obj.elf-i386 binary.
(relocs.obj.elf-x86_64 is still used by another test and can't be removed atm).
Differential revision: https://reviews.llvm.org/D62659
llvm-svn: 362377
rL362089 introduced a set of yaml based reloc-types-*.test test cases
(instead of huge reloc-types.test that used a lot of precompiled binaries)
These test cases checks LLVM-styled dumping of the relocations.
gnu-relocations.test was a test case to check GNU styled relocations dumping.
It did that only for elf-x86 and elf-x86_64 targets. It did not test all of the
relocations though.
Now, after rL362089, it does not make sence to keep it.
This patch updates reloc-types-elf-i386.test and reloc-types-elf-x64.test tests
with llvm-readelf calls to check GNU styled output in one place.
It removes gnu-relocations.test completely.
One of intentions of doing this is also to get rid of relocs.obj.elf-i386 and
relocs.obj.elf-x86_64 precompiled objects completely (they are used in other tests still).
Differential revision: https://reviews.llvm.org/D62655
llvm-svn: 362374
When LiveDebugValues deduces new variable's location from spill, restore or
register copy instruction it should close old variable's location. Otherwise
we can have multiple block output locations for same variable. That could lead
to inserting two DBG_VALUEs for same variable to the beginning of the successor
block which results to ignoring of first DBG_VALUE.
Reviewers: aprantl, jmorse, wolfgangp, dstenb
Reviewed By: aprantl
Subscribers: probinson, asowda, ivanbaev, petarj, djtodoro
Tags: #debug-info
Differential Revision: https://reviews.llvm.org/D62196
llvm-svn: 362373
Summary:
- pr42062
When compiling for MinSize,
ARMTargetLowering::LowerCall decides to indirect
multiple calls to a same function. However,
it disconsiders the limitation that thumb1
indirect calls require the callee to be in a
register from r0 to r3 (llvm limiation).
If all those registers are used by arguments, the
compiler dies with "error: run out of registers
during register allocation".
This patch tells the function
IsEligibleForTailCallOptimization if we intend to
perform indirect calls, as to avoid tail call
optimization.
Reviewers: dmgreen, efriedma
Reviewed By: efriedma
Subscribers: javed.absar, kristof.beyls, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D62683
llvm-svn: 362366
Summary:
LDWRdPtr would be expanded to ld+ldd. ldd only accepts the pointer register is Y or Z.
So the register class of pointer of LDWRdPtr should be PTRDISPREGS instead of PTRREGS.
Reviewers: dylanmckay
Reviewed By: dylanmckay
Subscribers: dylanmckay, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D62300
llvm-svn: 362351
If we hit the limit, we do expand the outstanding tokenfactors.
Otherwise, we might drop nodes with users in the unexpanded
tokenfactors. This fixes the crashes reported by Jordan Rupprecht.
Reviewers: niravd, spatel, craig.topper, rupprecht
Reviewed By: niravd
Differential Revision: https://reviews.llvm.org/D62633
llvm-svn: 362350
Also add two FC_Far that seem to be missing, by symmetry from
the public and protected cases. (But FC_Far isn't really a thing
anymore, so this doesn't really have an observable effect.)
llvm-svn: 362344
Add (opt-in) support for implicit truncation to isConstOrConstSplat, which allows us to match truncated 'all ones' cases in isBitwiseNot.
PR41020 compares against using ISD::isBuildVectorAllOnes() instead, but that predicate silently accepts any UNDEF elements in the build vector which might not be what we want in isBitwiseNot - so I've added an opt-in 'AllowUndefs' flag that is set to false by default but will allow us to enable it on individual cases where its safe.
Differential Revision: https://reviews.llvm.org/D62783
llvm-svn: 362323
The AVX512BW and AVX512VL checks were never used. And AVX512 is the same
as AVX on all tests that weren't already split for AVX1 and AVX2.
llvm-svn: 362308
Summary: Fneg can be implemented with an xor rather than a function call so we don't need to add the function call overhead. This was pointed out in D62699
Reviewers: efriedma, cameron.mcinally
Reviewed By: efriedma
Subscribers: javed.absar, eraman, hiraditya, haicheng, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D62747
llvm-svn: 362304
The `cfcmsa` and `ctcmsa` instructions accept index of MSA control
register. The MIPS64 SIMD Architecture define eight MSA control
registers. But register index for `cfcmsa` and `ctcmsa` instructions
might be any number in 0..31 range. If the index is greater then 7,
`cfcmsa` writes zero to the destination registers and `ctcmsa` does
nothing [1].
[1] MIPS Architecture for Programmers Volume IV-j:
The MIPS64 SIMD Architecture Module
https://www.mips.com/?do-download=the-mips64-simd-architecture-module
Differential Revision: https://reviews.llvm.org/D62597
llvm-svn: 362299
If we would allow register coalescing on PTRDISPREGS class then register
allocator can lock Z register to some virtual register. Larger instructions
requiring a memory acces then fail during the register allocation phase since
there is no available register to hold a pointer if Y register was already
taken for a stack frame. This patch prevents it by keeping Z register
spillable. It does it by not allowing coalescer to lock it.
Original discussion on https://github.com/avr-rust/rust/issues/128.
llvm-svn: 362298
I have initially added it in for test to display both
whether the binop w/ constant is sinked or hoisted.
But as it can be seen from the 'sub (sub C, %x), %y'
test, that actually conceals the issues it is supposed to test.
At least two more patterns are unhandled:
* 'add (sub C, %x), %y' - D62266
* 'sub (sub C, %x), %y'
llvm-svn: 362295
Fix for https://bugs.llvm.org/show_bug.cgi?id=31181 and partial fix
for LFTR poison handling issues in general.
When LFTR moves a condition from pre-inc to post-inc, it may now
depend on value that is poison due to nowrap flags. To avoid this,
we clear any nowrap flag that SCEV cannot prove for the post-inc
addrec.
Additionally, LFTR may switch to a different IV that is dynamically
dead and as such may be arbitrarily poison. This patch will correct
nowrap flags in some but not all cases where this happens. This is
related to the adoption of IR nowrap flags for the pre-inc addrec.
(See some of the switch_to_different_iv tests, where flags are not
dropped or insufficiently dropped.)
Finally, there are likely similar issues with the handling of GEP
inbounds, but we don't have a test case for this yet.
Differential Revision: https://reviews.llvm.org/D60935
llvm-svn: 362292
This allows the DWARFExpression class to handle addresses without
crashing on targets with 16-bit pointers like AVR.
This is required in order to generate assembly from clang via the '-S'
flag.
This fixes an error with the following message:
clang: llvm/include/llvm/DebugInfo/DWARF/DWARFExpression.h:132: llvm::DWARFExpression::DWARFExpression(llvm::DataExtractor, uint16_t, uint8_t):
Assertion `AddressSize == 8 || AddressSize == 4' failed.
llvm-svn: 362290
ARM64 CodeView test was incorrectly put under test/DebugInfo/COFF folder which
runs for all all architectures. This fix moves it to a subfolder AArch64 with
lit.local.cfg which specify it supports AArch64 only.
llvm-svn: 362283
At the moment, LoopPredication completely bails out if it sees a latch of the form:
%cmp = icmp ne %iv, %N
br i1 %cmp, label %loop, label %exit
OR
%cmp = icmp ne %iv.next, %NPlus1
br i1 %cmp, label %loop, label %exit
This is unfortunate since this is exactly the form that LFTR likes to produce. So, go ahead and recognize simple cases where we can.
For pre-increment loops, we leverage the fact that LFTR likes canonical counters (i.e. those starting at zero) and a (presumed) range fact on RHS to discharge the check trivially.
For post-increment forms, the key insight is in remembering that LFTR had to insert a (N+1) for the RHS. CVP can hopefully prove that add nsw/nuw (if there's appropriate range on N to start with). This leaves us both with the post-inc IV and the RHS involving an nsw/nuw add, and SCEV can discharge that with no problem.
This does still need to be extended to handle non-one steps, or other harder patterns of variable (but range restricted) starting values. That'll come later.
Differential Revision: https://reviews.llvm.org/D62748
llvm-svn: 362282
CodeView has its own register map which is defined in cvconst.h. Missing this
mapping before saving register to CodeView causes debugger to show incorrect
value for all register based variables, like variables in register and local
variables addressed by register (stack pointer + offset).
This change added mapping between LLVM register and CodeView register so the
correct register number will be stored to CodeView/PDB, it aso fixed the
mapping from CodeView register number to register name based on current
CPUType but print PDB to yaml still assumes X86 CPU and needs to be fixed.
Differential Revision: https://reviews.llvm.org/D62608
llvm-svn: 362280
Testing with debuggers shows that our previous behavior was correct.
The reason I thought MSVC did things differently is that MSVC prefers to
use the 0xB combined code offset and code length update opcode when
inline sites are discontiguous.
Keep the test changes, and update the llvm-pdbutil inline line table
dumper to account for this new interpretation of the opcodes.
llvm-svn: 362277
When the object size argument is -1, no checking can be done, so calling the
_chk variant is unnecessary. We already did this for a bunch of these
functions.
rdar://50797197
Differential revision: https://reviews.llvm.org/D62358
llvm-svn: 362272
After improving the inline line table dumper in llvm-pdbutil and looking
at MSVC's inline line tables, it is clear that setting the length of the
inlined code region does not update the code offset. This means that the
delta to the beginning of a new discontiguous inlined code region should
be calculated relative to the last code offset, excluding the length.
Implementing this is a one line fix for MC: simply don't update
LastLabel.
While I'm updating these test cases, switch them to use llvm-objdump -d
and llvm-pdbutil. This allows us to show offsets of each instruction and
correlate the line table offsets to the actual code.
llvm-svn: 362264
If we can determine that a saturating add/sub will not overflow based
on range analysis, convert it into a simple binary operation. This is
a sibling transform to the existing with.overflow handling.
Reapplying this with an additional check that the saturating intrinsic
has integer type, as LVI currently does not support vector types.
Differential Revision: https://reviews.llvm.org/D62703
llvm-svn: 362263
Noticed on D62703. LVI only handles plain integers, not vectors of
integers. This was previously not an issue, because vector support
for with.overflow is only a relatively recent addition.
llvm-svn: 362261
We don't want to create vregs if there is nothing to use them for. That causes
verifier errors.
Differential Revision: https://reviews.llvm.org/D62740
llvm-svn: 362247
If we can determine that a saturating add/sub will not overflow
based on range analysis, convert it into a simple binary operation.
This is a sibling transform to the existing with.overflow handling.
Differential Revision: https://reviews.llvm.org/D62703
llvm-svn: 362242
[FPEnv] Added a special UnrollVectorOp method to deal with the chain on StrictFP opcodes
This change creates UnrollVectorOp_StrictFP. The purpose of this is to address a failure that consistently occurs when calling StrictFP functions on vectors whose number of elements is 3 + 2n on most platforms, such as PowerPC or SystemZ. The old UnrollVectorOp method does not expect that the vector that it will unroll will have a chain, so it has an assert that prevents it from running if this is the case. This new StrictFP version of the method deals with the chain while unrolling the vector. With this new function in place during vector widending, llc can run vector-constrained-fp-intrinsics.ll for SystemZ successfully.
Submitted by: Drew Wock <drew.wock@sas.com>
Reviewed by: Cameron McInally, Kevin P. Neal
Approved by: Cameron McInally
Differential Revision: https://reviews.llvm.org/D62546
llvm-svn: 362241
AMDGPU uses multiplier 9 for the inline cost. It is taken into account
everywhere except for inline hint threshold. As a result we are penalizing
functions with the inline hint making them less probable to be inlined
than those without the hint. Defaults are 225 for a normal function and
325 for a function with an inline hint. Currently we have effective
threshold 225 * 9 = 2025 for normal functions and just 325 for those with
the hint. That is fixed by this patch.
Differential Revision: https://reviews.llvm.org/D62707
llvm-svn: 362239
In PPCReduceCRLogicals after splitting the original MBB into 2, the 2 impacted branches still use original branch probability. This is unreasonable. Suppose we have following code, and the probability of each successor is 50%.
condc = conda || condb
br condc, label %target, label %fallthrough
It can be transformed to following,
br conda, label %target, label %newbb
newbb:
br condb, label %target, label %fallthrough
Since each branch has a probability of 50% to each successor, the total probability to %fallthrough is 25% now, and the total probability to %target is 75%. This actually changed the original profiling data. A more reasonable probability can be set to 70% to the false side for each branch instruction, so the total probability to %fallthrough is close to 50%.
This patch assumes the branch target with two incoming edges have same edge frequency and computes new probability fore each target, and keep the total probability to original targets unchanged.
Differential Revision: https://reviews.llvm.org/D62430
llvm-svn: 362237
It looks this fold was already partially happening, indirectly
via some other folds, but with one-use limitation.
No other fold here has that restriction.
https://rise4fun.com/Alive/ftR
llvm-svn: 362217
Summary:
A three sources variant of the TBL instruction is added to the existing
SVE instruction in SVE2. This is implemented with minor changes to the
existing TableGen class. TBX is a new instruction with its own
definition.
The specification can be found here:
https://developer.arm.com/docs/ddi0602/latest
Reviewed By: chill
Differential Revision: https://reviews.llvm.org/D62600
llvm-svn: 362214
Test different operand types of callee and their behavior whether
relocation model is pic or not.
Possible operand types are:
Register (function pointer),
External symbol (used for libcalls e.g. __udivdi3 or memcpy),
Global address.
Global address has different handling depending on relocation model
and linkage type. Register and external symbol do not.
Differential Revision: https://reviews.llvm.org/D62590
llvm-svn: 362212
Handle position independent code for MIPS32.
When callee is global address, lower call will emit callee
as G_GLOBAL_VALUE and add target flag if needed.
Support $gp in getRegBankFromRegClass().
Select G_GLOBAL_VALUE, specially handle case when
there are target flags attached by lowerCall.
Differential Revision: https://reviews.llvm.org/D62589
llvm-svn: 362210
Lower call for callee that is register for MIPS32.
Register should contain callee function address.
Differential Revision: https://reviews.llvm.org/D62585
llvm-svn: 362204
These patterns can incorrectly narrow a volatile load from 128-bits to 64-bits.
Similar to PR42079.
Switch to using (v4i32 (bitcast (v2i64 (scalar_to_vector (loadi64))))) as the
load pattern used in the instructions.
This probably still has issues in 32-bit mode where loadi64 isn't legal. Maybe
we should use VZMOVL for widened loads even when we don't need the upper bits
as zeroes?
llvm-svn: 362203
DAG combine will usually fold fpextend+load to an fp extload anyway. So the
256 and 512 patterns were probably unnecessary. The 128 bit pattern was special
in that it looked for a v4f32 load, but then used it in an instruction that
only loads 64-bits. This is bad if the load happens to be volatile. We could
probably make the patterns volatile aware, but that's more work for something
that's probably rare. The peephole pass might kick in and save us anyway. We
might also be able to fix this with some additional DAG combines.
This also adds patterns for vselect+extload to enabled masked vcvtps2pd to be
used. Previously we looked for the unlikely vselect+fpextend+load.
llvm-svn: 362199
This consolidates the vreg skip code into one function (SkipVRegs()).
SkipVRegs() now knows if it should skip as if it is the first initialization or
subsequent skips.
The first skip is also done the first time createVirtualRegister is called by
the cursor instead of by the cursor's constructor. This prevents verifier
errors on machine functions that have no vregs (where the verifier will
complain that there are vregs when the function uses none).
Differential Revision: https://reviews.llvm.org/D62717
llvm-svn: 362195
This makes the 5 address operands come first. And the data operand comes last.
This matches the operand order the instruction is created with. It's also the
expected order in X86MCInstLower. So everything appeared to work, but the
operands didn't match their declared type.
Fixes a -verify-machineinstrs failure.
Also remove the isel patterns from these instructions since they should only
be used for stack spills and reloads. I'm not even sure what types the patterns
were looking for to match.
llvm-svn: 362193
This is am almost NFC, it does the following:
- If there is no register class for a COPY's src or dst, bail.
- Fixes uses iterator invalidation bug.
Differential Revision: https://reviews.llvm.org/D62713
llvm-svn: 362191
Summary:
Keeps track of the enums that were used by saving them as DIGlobalVariables,
since CodeView emits debug info for global constants.
Reviewers: rnk
Subscribers: aprantl, cfe-commits, llvm-commits
Tags: #clang, #llvm
Differential Revision: https://reviews.llvm.org/D62635
llvm-svn: 362166
Summary:
Only vector tests are being affected here,
since subtraction by scalar constant is rewritten
as addition by negated constant.
No surprising test changes.
https://rise4fun.com/Alive/pbT
This is a recommit, originally committed in rL361852, but reverted
to investigate test-suite compile-time hangs.
Reviewers: RKSimon, craig.topper, spatel
Reviewed By: RKSimon
Subscribers: javed.absar, kristof.beyls, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D62257
llvm-svn: 362146
Summary:
Again only vectors affected. Frustrating. Let me take a look into that..
https://rise4fun.com/Alive/AAq
This is a recommit, originally committed in rL361852, but reverted
to investigate test-suite compile-time hangs, and then reverted in
rL362109 to fix missing constant folds that were causing
endless combine loops.
Reviewers: RKSimon, craig.topper, spatel
Reviewed By: RKSimon
Subscribers: javed.absar, JDevlieghere, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D62294
llvm-svn: 362145
Summary:
This prevents regressions in next patch,
and somewhat recovers from the regression to AMDGPU test in D62223.
It is indeed not great that we leave vector decrement,
don't transform it into vector add all-ones..
https://rise4fun.com/Alive/ZRl
This is a recommit, originally committed in rL361852, but reverted
to investigate test-suite compile-time hangs, and then reverted in
rL362109 to fix missing constant folds that were causing
endless combine loops.
Reviewers: RKSimon, craig.topper, spatel, arsenm
Reviewed By: RKSimon, arsenm
Subscribers: kzhuravl, jvesely, wdng, nhaehnle, yaxunl, javed.absar, dstuttard, tpr, t-tye, kristof.beyls, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D62263
llvm-svn: 362144
Summary:
Direct sibling of D62223 patch.
While i don't have a direct motivational pattern for this,
it would seem to make sense to handle both patterns (or none),
for symmetry?
The aarch64 changes look neutral;
sparc and systemz look like improvement (one less instruction each);
x86 changes - 32bit case improves, 64bit case shows that LEA no longer
gets constructed, which may be because that whole test is `-mattr=+slow-lea,+slow-3ops-lea`
https://rise4fun.com/Alive/ffh
This is a recommit, originally committed in rL361852, but reverted
to investigate test-suite compile-time hangs, and then reverted in
rL362109 to fix missing constant folds that were causing
endless combine loops.
Reviewers: RKSimon, craig.topper, spatel, t.p.northover
Reviewed By: t.p.northover
Subscribers: t.p.northover, jyknight, javed.absar, kristof.beyls, fedor.sergeev, jrtc27, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D62252
llvm-svn: 362143
Summary:
The main motivation is shown by all these `neg` instructions that are now created.
In particular, the `@reg32_lshr_by_negated_unfolded_sub_b` test.
AArch64 test changes all look good (`neg` created), or neutral.
X86 changes look neutral (vectors), or good (`neg` / `xor eax, eax` created).
I'm not sure about `X86/ragreedy-hoist-spill.ll`, it looks like the spill
is now hoisted into preheader (which should still be good?),
2 4-byte reloads become 1 8-byte reload, and are elsewhere,
but i'm not sure how that affects that loop.
I'm unable to interpret AMDGPU change, looks neutral-ish?
This is hopefully a step towards solving [[ https://bugs.llvm.org/show_bug.cgi?id=41952 | PR41952 ]].
https://rise4fun.com/Alive/pkdq (we are missing more patterns, i'll submit them later)
This is a recommit, originally committed in rL361852, but reverted
to investigate test-suite compile-time hangs, and then reverted in
rL362109 to fix missing constant folds that were causing
endless combine loops.
Reviewers: craig.topper, RKSimon, spatel, arsenm
Reviewed By: RKSimon
Subscribers: bjope, qcolombet, kzhuravl, jvesely, wdng, nhaehnle, yaxunl, javed.absar, dstuttard, tpr, t-tye, kristof.beyls, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D62223
llvm-svn: 362142
Summary:
The tests for r362121 ran dsymutil against a test binary every time.
This caused problems on lld-x86_64-ubuntu-fast as dsymutil required
a lipo tool be available to process those binaries.
This change rewrites the new test cases in macho-disassemble-g-dsym
to use bespoke test binaries (exe and dwarf) simplifying the test's
runtime dependencies.
The changes to tools/llvm-objdump/MachODump.cpp are unchanged from
r362121
Reviewers: pete, lhames, JDevlieghere
Reviewed By: pete
Subscribers: smeenai, aprantl, rupprecht, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D62694
llvm-svn: 362141
increase the MachO/x86-64 stub alignment to 8.
Stub alignment should be guaranteed for any section containing RuntimeDyld
stubs/GOT-entries. To do this we should pad and align all sections containing
stubs, not just code sections.
This commit also bumps the MachO/x86-64 stub alignment to 8, so that GOT entries
will be aligned.
llvm-svn: 362139
Summary:
Direct sibling of D62662, the root cause of the endless combine loop in D62257
https://rise4fun.com/Alive/d3W
Reviewers: RKSimon, craig.topper, spatel, t.p.northover
Reviewed By: t.p.northover
Subscribers: t.p.northover, javed.absar, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D62664
llvm-svn: 362133
Summary:
This was the root cause of the endless combine loop in D62257
https://rise4fun.com/Alive/d3W
Reviewers: RKSimon, spatel, craig.topper, t.p.northover
Reviewed By: t.p.northover
Subscribers: t.p.northover, javed.absar, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D62662
llvm-svn: 362131
When we switch to opaque pointer types we will need some way to describe
how many bytes a 'byval' parameter should occupy on the stack. This adds
a (for now) optional extra type parameter.
If present, the type must match the pointee type of the argument.
The original commit did not remap byval types when linking modules, which broke
LTO. This version fixes that.
Note to front-end maintainers: if this causes test failures, it's probably
because the "byval" attribute is printed after attributes without any parameter
after this change.
llvm-svn: 362128
With LLPC, previous investigation has suggested that si-scheduler
interacts badly with SiFormMemoryClauses on an XNACK target in some
games.
That needs further investigation in the future. In the meantime, this
commit adds a target-specific attribute to allow us to disable
SIFormMemoryClauses by setting it to 1 on a per-function basis for LLPC
to use.
Differential Revision: https://reviews.llvm.org/D62572
Change-Id: Ia0ca12ce79093cbbe86caded723ffb13384ede92
llvm-svn: 362127
Bjorn Pettersson