Introduce a new VPWidenCanonicalIVRecipe to generate a canonical vector
induction for use in fold-tail-with-masking, if a primary induction is absent.
The canonical scalar IV having start = 0 and step = VF*UF, created during code
-gen to control the vector loop, is widened into a canonical vector IV having
start = {<Part*VF, Part*VF+1, ..., Part*VF+VF-1> for 0 <= Part < UF} and
step = <VF*UF, VF*UF, ..., VF*UF>.
Differential Revision: https://reviews.llvm.org/D77635
Summary:
Add mapping from exp2 math functions
to corresponding SVML calls.
This is a follow up and extension for llvm diff
https://reviews.llvm.org/D19544
Test Plan:
- update test case and run ninja check.
- run tests locally
Reviewers: wenlei, hoyFB, mmasten, mzolotukhin, spatel
Reviewed By: spatel
Subscribers: llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D77114
This tries to improve the accuracy of extract/insert element costs by accounting for subvector extraction/insertion for >128-bit vectors and the shuffling of elements to/from the 0'th index.
It also adds INSERTPS for f32 types and PINSR/PEXTR costs for integer types (at the moment we assume the same cost as MOVD/MOVQ - which isn't always true).
Differential Revision: https://reviews.llvm.org/D74976
Summary:
Previosly we simply always said that `SCEVMinMaxExpr` is too costly to expand.
But this isn't really true, it expands into just a comparison+swap pair.
And again much like with add/mul, there will be one less such pair
than the number of operands. And we need to count the cost of operands themselves.
This does change a number of testcases, and as far as i can tell,
all of these changes are improvements, in the sense that
we fixed up more latches to do the [in]equality comparison.
This concludes cost-modelling changes, no other SCEV expressions exist as of now.
This is a part of addressing [[ https://bugs.llvm.org/show_bug.cgi?id=44668 | PR44668 ]].
Reviewers: reames, mkazantsev, wmi, sanjoy
Reviewed By: mkazantsev
Subscribers: hiraditya, javed.absar, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D73744
Summary:
Currently, `SCEVExpander::isHighCostExpansionHelper()` has the following logic:
```
if (auto *UDivExpr = dyn_cast<SCEVUDivExpr>(S)) {
// If the divisor is a power of two and the SCEV type fits in a native
// integer (and the LHS not expensive), consider the division cheap
// irrespective of whether it occurs in the user code since it can be
// lowered into a right shift.
if (auto *SC = dyn_cast<SCEVConstant>(UDivExpr->getRHS()))
if (SC->getAPInt().isPowerOf2()) {
if (isHighCostExpansionHelper(UDivExpr->getLHS(), L, At,
BudgetRemaining, TTI, Processed))
return true;
const DataLayout &DL =
L->getHeader()->getParent()->getParent()->getDataLayout();
unsigned Width = cast<IntegerType>(UDivExpr->getType())->getBitWidth();
return DL.isIllegalInteger(Width);
}
```
Since this test does not have a datalayout specified,
`SCEVExpander::isHighCostExpansionHelper()` says that
`[[TMP2:%.*]] = lshr exact i64 [[TMP1]], 5` is high-cost, and didn't perform it.
But future patches will change that logic to solely rely on cost-model,
without any such datalayout checks, so i think it is best to show
that that change is ephemeral, and can already happen without costmodel changes.
Reviewers: reames, fhahn, sanjoy, craig.topper, RKSimon
Reviewed By: RKSimon
Subscribers: javed.absar, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D73717
This patch adds initial support for a DemandedElts mask to the internal computeKnownBits/ComputeNumSignBits methods, matching the SelectionDAG and GlobalISel equivalents.
So far only a couple of instructions have been setup to handle the DemandedElts, the remainder still using the existing 'all elements' default. The plan is to extend support as we have test coverage.
Differential Revision: https://reviews.llvm.org/D73435
Don't overwrite existing target-cpu attributes.
I've often found the replacement behavior annoying, and this is
inconsistent with how the fast math command line flags interact with
the function attributes.
Does not yet change target-features, since I think that should behave
as a concatenation.
A sequence of additions or multiplications that is known not to wrap, may wrap
if it's order is changed (i.e., reassociated). Therefore when vectorizing
integer sum or product reductions, their no-wrap flags need to be removed.
Fixes PR43828
Patch by Denis Antrushin
Differential Revision: https://reviews.llvm.org/D69563
Fix PR40816: avoid considering scalar-with-predication instructions as also
uniform-after-vectorization.
Instructions identified as "scalar with predication" will be "vectorized" using
a replicating region. If such instructions are also optimized as "uniform after
vectorization", namely when only the first of VF lanes is used, such a
replicating region becomes erroneous - only the first instance of the region can
and should be formed. Fix such cases by not considering such instructions as
"uniform after vectorization".
Differential Revision: https://reviews.llvm.org/D70298
I'm not sure what the effect of this change will be on all of the affected
tests or a larger benchmark, but it fixes the horizontal add/sub problems
noted here:
https://reviews.llvm.org/D59710?vs=227972&id=228095&whitespace=ignore-most#toc
The costs are based on reciprocal throughput numbers in Agner's tables for
PEXTR*; these appear to be very slow ops on Silvermont.
This is a small step towards the larger motivation discussed in PR43605:
https://bugs.llvm.org/show_bug.cgi?id=43605
Also, it seems likely that insert/extract is the source of perf regressions on
other CPUs (up to 30%) that were cited as part of the reason to revert D59710,
so maybe we'll extend the table-based approach to other subtargets.
Differential Revision: https://reviews.llvm.org/D70607
Summary:
Getelementptr has vector type if any of its operands are vectors
(the scalar operands being implicitly broadcast to all vector elements).
Extractelement applied to a vector getelementptr can be folded by
applying the extractelement in turn to all of the vector operands.
Subscribers: hiraditya, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D69379
Currently we may do iterleaving by more than estimated trip count
coming from the profile or computed maximum trip count. The solution is to
use "best known" trip count instead of exact one in interleaving analysis.
Patch by Evgeniy Brevnov.
Differential Revision: https://reviews.llvm.org/D67948
In loop-vectorize, interleave count and vector factor depend on target register number. Currently, it does not
estimate different register pressure for different register class separately(especially for scalar type,
float type should not be on the same position with int type), so it's not accurate. Specifically,
it causes too many times interleaving/unrolling, result in too many register spills in loop body and hurting performance.
So we need classify the register classes in IR level, and importantly these are abstract register classes,
and are not the target register class of backend provided in td file. It's used to establish the mapping between
the types of IR values and the number of simultaneous live ranges to which we'd like to limit for some set of those types.
For example, POWER target, register num is special when VSX is enabled. When VSX is enabled, the number of int scalar register is 32(GPR),
float is 64(VSR), but for int and float vector register both are 64(VSR). So there should be 2 kinds of register class when vsx is enabled,
and 3 kinds of register class when VSX is NOT enabled.
It runs on POWER target, it makes big(+~30%) performance improvement in one specific bmk(503.bwaves_r) of spec2017 and no other obvious degressions.
Differential revision: https://reviews.llvm.org/D67148
llvm-svn: 374634
Also Revert "[LoopVectorize] Fix non-debug builds after rL374017"
This reverts commit 9f41deccc0.
This reverts commit 18b6fe07bc.
The patch is breaking PowerPC internal build, checked with author, reverting
on behalf of him for now due to timezone.
llvm-svn: 374091
In loop-vectorize, interleave count and vector factor depend on target register number. Currently, it does not
estimate different register pressure for different register class separately(especially for scalar type,
float type should not be on the same position with int type), so it's not accurate. Specifically,
it causes too many times interleaving/unrolling, result in too many register spills in loop body and hurting performance.
So we need classify the register classes in IR level, and importantly these are abstract register classes,
and are not the target register class of backend provided in td file. It's used to establish the mapping between
the types of IR values and the number of simultaneous live ranges to which we'd like to limit for some set of those types.
For example, POWER target, register num is special when VSX is enabled. When VSX is enabled, the number of int scalar register is 32(GPR),
float is 64(VSR), but for int and float vector register both are 64(VSR). So there should be 2 kinds of register class when vsx is enabled,
and 3 kinds of register class when VSX is NOT enabled.
It runs on POWER target, it makes big(+~30%) performance improvement in one specific bmk(503.bwaves_r) of spec2017 and no other obvious degressions.
Differential revision: https://reviews.llvm.org/D67148
llvm-svn: 374017
Implement a TODO from rL371452, and handle loop invariant addresses in predicated blocks. If we can prove that the load is safe to speculate into the header, then we can avoid using a masked.load in favour of a normal load.
This is mostly about vectorization robustness. In the common case, it's generally expected that LICM/LoadStorePromotion would have eliminated such loads entirely.
Differential Revision: https://reviews.llvm.org/D67372
llvm-svn: 371745
If we're vectorizing a load in a predicated block, check to see if the load can be speculated rather than predicated. This allows us to generate a normal vector load instead of a masked.load.
To do so, we must prove that all bytes accessed on any iteration of the original loop are dereferenceable, and that all loads (across all iterations) are properly aligned. This is equivelent to proving that hoisting the load into the loop header in the original scalar loop is safe.
Note: There are a couple of code motion todos in the code. My intention is to wait about a day - to be sure this sticks - and then perform the NFC motion without furthe review.
Differential Revision: https://reviews.llvm.org/D66688
llvm-svn: 371452
Allow vectorizing loops that have reductions when tail is folded by masking.
A select is introduced in VPlan, choosing between the last value carried by the
loop-exit/live-out instruction of the reduction, and the penultimate value
carried by the reduction phi, according to the "i < n" mask of fold-tail.
This select replaces the last value as the live-out value of the loop.
Differential Revision: https://reviews.llvm.org/D66720
llvm-svn: 370173
assume_safety implies that loads under "if's" can be safely executed
speculatively (unguarded, unmasked). However this assumption holds only for the
original user "if's", not those introduced by the compiler, such as the
fold-tail "if" that guards us from loading beyond the original loop trip-count.
Currently the combination of fold-tail and assume-safety pragmas results in
ignoring the fold-tail predicate that guards the loads, generating unmasked
loads. This patch fixes this behavior.
Differential Revision: https://reviews.llvm.org/D66106
Reviewers: Ayal, hsaito, fhahn
llvm-svn: 368973
This is the compiler-flag equivalent of the Predicate pragma
(https://reviews.llvm.org/D65197), to direct the vectorizer to fold the
remainder-loop into the main-loop using predication.
Differential Revision: https://reviews.llvm.org/D66108
Reviewers: Ayal, hsaito, fhahn, SjoerdMeije
llvm-svn: 368801
If we know the trip count, we should make sure the interleave factor won't cause the vectorized loop to exceed it.
Improves one of the cases from PR42674
Differential Revision: https://reviews.llvm.org/D65896
llvm-svn: 368215
This allows folding of the scalar epilogue loop (the tail) into the main
vectorised loop body when the loop is annotated with a "vector predicate"
metadata hint. To fold the tail, instructions need to be predicated (masked),
enabling/disabling lanes for the remainder iterations.
Differential Revision: https://reviews.llvm.org/D65197
llvm-svn: 367592
This reverts commit r365260 which broke the following tests:
Clang :: CodeGenCXX/cfi-mfcall.cpp
Clang :: CodeGenObjC/ubsan-nullability.m
LLVM :: Transforms/LoopVectorize/AArch64/pr36032.ll
llvm-svn: 365284
Without this, we have the unfortunate property that tests are dependent on the order of operads passed the CreateOr and CreateAnd functions. In actual usage, we'd promptly optimize them away, but it made tests slightly more verbose than they should have been.
llvm-svn: 365260
Summary:
Bug: https://bugs.llvm.org/show_bug.cgi?id=39024
The bug reports that a vectorized loop is stepped through 4 times and each step through the loop seemed to show a different path. I found two problems here:
A) An incorrect line number on a preheader block (for.body.preheader) instruction causes a step into the loop before it begins.
B) Instructions in the middle block have different line numbers which give the impression of another iteration.
In this patch I give all of the middle block instructions the line number of the scalar loop latch terminator branch. This seems to provide the smoothest debugging experience because the vectorized loops will always end on this line before dropping into the scalar loop. To solve problem A I have altered llvm::SplitBlockPredecessors to accommodate loop header blocks.
I have set up a separate review D61933 for a fix which is required for this patch.
Reviewers: samsonov, vsk, aprantl, probinson, anemet, hfinkel, jmorse
Reviewed By: hfinkel, jmorse
Subscribers: jmorse, javed.absar, eraman, kcc, bjope, jmellorcrummey, hfinkel, gbedwell, hiraditya, zzheng, llvm-commits
Tags: #llvm, #debug-info
Differential Revision: https://reviews.llvm.org/D60831
> llvm-svn: 363046
llvm-svn: 363786
When considering a loop containing nontemporal stores or loads for
vectorization, suppress the vectorization if the corresponding
vectorized store or load with the aligment of the original scaler
memory op is not supported with the nontemporal hint on the target.
This adds two new functions:
bool isLegalNTStore(Type *DataType, unsigned Alignment) const;
bool isLegalNTLoad(Type *DataType, unsigned Alignment) const;
to TTI, leaving the target independent default implementation as
returning true, but with overriding implementations for X86 that
check the legality based on available Subtarget features.
This fixes https://llvm.org/PR40759
Differential Revision: https://reviews.llvm.org/D61764
llvm-svn: 363581
Summary:
Avoid that loop vectorizer creates loads/stores of vectors
with "irregular" types when interleaving. An example of
an irregular type is x86_fp80 that is 80 bits, but that
may have an allocation size that is 96 bits. So an array
of x86_fp80 is not bitcast compatible with a vector
of the same type.
Not sure if interleavedAccessCanBeWidened is the best
place for this check, but it solves the problem seen
in the added test case. And it is the same kind of check
that already exists in memoryInstructionCanBeWidened.
Reviewers: fhahn, Ayal, craig.topper
Reviewed By: fhahn
Subscribers: hiraditya, rkruppe, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D63386
llvm-svn: 363547
InsertBinop now accepts NoWrapFlags, so pass them through when
expanding a simple add expression.
This is the first re-commit of the functional changes from rL362687,
which was previously reverted.
Differential Revision: https://reviews.llvm.org/D61934
llvm-svn: 363364
Summary:
Bug: https://bugs.llvm.org/show_bug.cgi?id=39024
The bug reports that a vectorized loop is stepped through 4 times and each step through the loop seemed to show a different path. I found two problems here:
A) An incorrect line number on a preheader block (for.body.preheader) instruction causes a step into the loop before it begins.
B) Instructions in the middle block have different line numbers which give the impression of another iteration.
In this patch I give all of the middle block instructions the line number of the scalar loop latch terminator branch. This seems to provide the smoothest debugging experience because the vectorized loops will always end on this line before dropping into the scalar loop. To solve problem A I have altered llvm::SplitBlockPredecessors to accommodate loop header blocks.
I have set up a separate review D61933 for a fix which is required for this patch.
Reviewers: samsonov, vsk, aprantl, probinson, anemet, hfinkel, jmorse
Reviewed By: hfinkel, jmorse
Subscribers: jmorse, javed.absar, eraman, kcc, bjope, jmellorcrummey, hfinkel, gbedwell, hiraditya, zzheng, llvm-commits
Tags: #llvm, #debug-info
Differential Revision: https://reviews.llvm.org/D60831
llvm-svn: 363046
Ayal Zaks