It's more than just inttoptr, but the others can't be tested until we have
support for non-trivial constants (they currently get unavoidably folded to a
ConstantInt).
llvm-svn: 278303
If the value produced by the bitcast hasn't been referenced yet, we can simply
reuse the input register avoiding an unnecessary COPY instruction.
llvm-svn: 278245
For now put them all in the entry block. This should be correct but may give
poor runtime performance. Hopefully MachineSinking combined with
isReMaterializable can solve those issues, but if not the interface is sound
enough to support alternatives.
llvm-svn: 278168
These are the operations that are trivially identical. Division is omitted for
now because you need to use the correct sign/zero extension.
llvm-svn: 277775
None of GlobalISel requires the property, but this lets us use the
verifier instead of rolling our own "all instructions selected" check.
llvm-svn: 277484
RegBankSelect and InstructionSelect run after the legalizer and
require a Legalized function: check that all instructions are legal.
Note that this should be in the MachineVerifier, but it can't use the
MachineLegalizer as it's currently in the separate GlobalISel library.
Note that the RegBankSelect verifier checks have the same layering
problem, but we only use inline methods so end up not needing to link
against the GlobalISel library.
llvm-svn: 277472
These come in two variants for now: G_INTRINSIC and G_INTRINSIC_W_SIDE_EFFECTS.
We may decide to split the latter up with finer-grained restrictions later, if
necessary.
llvm-svn: 277224
For MachineInstrBuilder, having to manually use RegState::Define is ugly and
makes register definitions clunkier than they need to be, so this adds two
convenience functions: addDef and addUse.
For MachineIRBuilder, we want to avoid BuildMI's first-reg-is-def rule because
it's hidden away and causes bugs. So this patch switches buildInstr to
returning a MachineInstrBuilder and adding *all* operands via addDef/addUse.
NFC.
llvm-svn: 277176
Mostly straightforward as we ignore addressing modes and just
use the base + unsigned immediate offset (always 0) variants.
This currently fails to select extloads because we have yet to
agree on a representation.
llvm-svn: 277171
Instead of an ad-hoc collection of "buildInstr" functions with varying numbers
of registers, this uses variadic templates to provide for as many regs as
needed!
Also make IRtranslator use new "buildBr" function instead of some weird generic
one that no-one else would really use.
llvm-svn: 276762
This adds LLVM's 3 main cast instructions (inttoptr, ptrtoint, bitcast) to the
IRTranslator. The first two are direct translations (with 2 MachineInstr types
each). Since LLT discards information, a bitcast might become trivial and we
emit a COPY in those cases instead.
llvm-svn: 276690
This adds the actual MachineLegalizeHelper to do the work and a trivial pass
wrapper that legalizes all instructions in a MachineFunction. Currently the
only transformation supported is splitting up a vector G_ADD into one acting on
smaller vectors.
llvm-svn: 276461
This should be all the low-level instruction selection needs to determine how
to implement an operation, with the remaining context taken from the opcode
(e.g. G_ADD vs G_FADD) or other flags not based on type (e.g. fast-math).
llvm-svn: 276158
We can freeze the registers after the MachineFrameInfo has been configured (by
telling it about calls, inline asm, ...). This doesn't happen at all yet, but
will be part of IR translation.
Fixes -verify-machineinstrs assertion.
llvm-svn: 275221
For complex rewrittings, which do not occur currently, the related
machine instruction may have been deleted in the process. Therefore, do
not try to print it after the mapping is applied.
llvm-svn: 272209
Refactor the code so that we do not compute in two different places the
end iterator for the range of new virtual registers for a given operand.
Although this refactoring was intended as NFC, this is not the case
because it actually fixes a bug where we were returning a range off by 1
(too long). Right now, this could not result in an actual bug because we
were accessing this range via the BreakDown size of the related operand.
llvm-svn: 272208
When repairing with a copy, instead of accounting for the cost of that
copy and actually inserting it, we may be able to use an alternative
source for the register to repair and just use it.
Make sure this is documented, so that we consider that opportunity at
some point.
llvm-svn: 272176
Now, the target will be able to provide its how implementation to remap
an instruction. This open the way to crazier optimizations, but to
beginning with, we will be able to handle something else than the
default mapping.
llvm-svn: 272165
When the command line option is set, it overrides any thing that the
target may have set. The rationale is that we get what we asked for.
Options are respectively regbankselect-fast and regbankselect-greedy for
fast and greedy mode.
llvm-svn: 272158
repairing.
Copies are easy because we repair only when there is a mismatch. For
non-copy repairing, i.e., cases that involves breaking down or gathering
up the value, one of the operand may not have a register bank yet. Thus,
derivate a cost from that, requires more work.
llvm-svn: 272157
The cost of a copy may be different based on how many bits we have to
copy around. E.g., a 8-bit copy may be different than a 32-bit copy.
llvm-svn: 272084
Prior to this patch, we were using 1 for all the repairing costs.
Now, we use the information from the target to get this information.
llvm-svn: 270304
The Fast mode takes the first mapping, the greedy mode loops over all
the possible mapping for an instruction and choose the cheaper one.
Test case will come with target specific code, since we currently do not
have instructions that have several mappings.
llvm-svn: 270249
computeMapping.
Computing the cost of a mapping takes some time.
Since in Fast mode, the cost is irrelevant, just spare some cycles by not
computing it.
In Greedy mode, we need to choose the best cost, that means that when
the local cost gets more expensive than the best cost, we can stop
computing the repairing and cost for the current mapping.
llvm-svn: 270245
The previous choice of the insertion points for repairing was
straightfoward but may introduce some basic block or edge splitting. In
some situation this is something we can avoid.
For instance, when repairing a phi argument, instead of placing the
repairing on the related incoming edge, we may move it to the previous
block, before the terminators. This is only possible when the argument
is not defined by one of the terminator.
llvm-svn: 270232
an instruction.
Use the previously introduced RepairingPlacement class to split the code
computing the repairing placement from the code doing the actual
placement. That way, we will be able to consider different placement and
then, only apply the best one.
llvm-svn: 270168
When assigning the register banks we may have to insert repairing code
to move already assigned values accross register banks.
Introduce a few helper classes to keep track of what is involved in the
repairing of an operand:
- InsertPoint and its derived classes record the positions, in the CFG,
where repairing has to be inserted.
- RepairingPlacement holds all the insert points for the repairing of an
operand plus the kind of action that is required to do the repairing.
This is going to be used to keep track of how the repairing should be
done, while comparing different solutions for an instruction. Indeed, we
will need the repairing placement to capture the cost of a solution and
we do not want to compute it a second time when we do the actual
repairing.
llvm-svn: 270167
register bank twice.
Prior to this change, we were checking if the assignment for the current
machine operand was matching, then we would check if the mismatch
requires to insert repair code.
We actually already have this information from the first check, so just
pass it along.
NFCI.
llvm-svn: 270166
This helper class will be used to represent the cost of mapping an
instruction to a specific register bank.
The particularity of these costs is that they are mostly local, thus the
frequency of the basic block is irrelevant. However, for few
instructions (e.g., phis and terminators), the cost may be non-local and
then, we need to account for the frequency of the involved basic blocks.
This will be used by the greedy mode I am working on.
llvm-svn: 270163
Instead of holding a mask, hold two value: the start index and the
length of the mapping. This is a more compact representation, although
less powerful. That being said, arbitrary masks would not have worked
for the generic so do not allow them in the first place.
llvm-svn: 267025
Although repairing definitions is not mandatory for correctness (only
phis would be impacted because of the RPO traversal), not repairing
might go against the cost model. Therefore, just repair when it is
possible.
llvm-svn: 266025
When assigning the register banks of an instruction, it is best to know
all the constraints of the input to have a good idea of how this will
impact the cost of the whole function.
llvm-svn: 265812
Do not give that much importance to the current register bank of an
operand. This is likely just a side effect of the current execution and
it is properly wise to prefer a register bank that can be extracted from
the information available statically (like encoding constraints and
type).
llvm-svn: 265810
Add verbose information when checking if the current and the desired
register banks match.
Detail what happens when we assign a register bank.
llvm-svn: 265804
specific type.
This will be used to find the default mapping of the instruction.
Also, this information is recorded, instead of computed, because it is
expensive from a type to know which register bank maps it.
Indeed, we need to iterate through all the register classes of all the
register banks to find the one that maps the given type.
llvm-svn: 265736
from a register.
On top of duplicating the logic, it was buggy! It would assert on
physical registers, since MachineRegisterInfo does not have any
information regarding register classes/banks for them.
llvm-svn: 265727
The pass walk through the machine function and assign the register banks
using the default mapping. In other words, there is no attempt to reduce
cross register copies.
llvm-svn: 265707
the mapping of an instruction on register bank.
For most instructions, it is possible to guess the mapping of the
instruciton by using the encoding constraints.
It remains instructions without encoding constraints.
For copy-like instructions, we try to propagate the information we get
from the other operands. Otherwise, the target has to give this
information.
llvm-svn: 265703
helper class.
The default constructor creates invalid (isValid() == false) instances
and may be used to communicate that a mapping was not found.
llvm-svn: 265699
getInstrMapping.
This implementation requires that the target implemented
getRegBankFromRegClass.
Indeed, the implementation uses the register classes for the encoding
constraints for the instructions to deduce the mapping of a value.
llvm-svn: 265624
Tim Northover