Reduce memory footprint of AST Reader/Writer:
1. Adjust internal data containers' element type.
2. Switch to set for deduplication of deferred diags.
Differential Revision: https://reviews.llvm.org/D101793
Drop non-conformant extension pragma implementation as
it does not properly disable anything and therefore
enabling non-disabled logic has no meaning.
This simplifies clang code and user interface to the extension
functionality. With this patch extension pragma 'begin'/'end'
and 'enable'/'disable' are only accepted for backward
compatibility and no longer have any default behavior.
Differential Revision: https://reviews.llvm.org/D101043
Added basic parsing/sema/serialization support to extend the
existing 'destroy' clause for use with the 'interop' directive.
Differential Revision: https://reviews.llvm.org/D98834
Added basic parsing/sema/serialization support for interop directive.
Support for the 'init' clause.
Differential Revision: https://reviews.llvm.org/D98558
This commit refactors extension support to allow
specifying whether pragma is needed or not explicitly.
For backward compatibility pragmas are set to required
for all extensions that were added prior to this but
not for OpenCL 3.0 features.
Differential Revision: https://reviews.llvm.org/D97052
tables.
This gives a modest AST file size reduction, while also fixing crashes
in cases where the key or data length doesn't fit into 16 bits.
Unfortunately, such situations tend to require huge test cases (such as
more than 16K modules or an overload set with 16K entries), and I
couldn't get a testcase to finish in a reasonable amount of time, so no
test is included for that bugfix.
No functionality change intended (other than the bugfix).
The tile directive is in OpenMP's Technical Report 8 and foreseeably will be part of the upcoming OpenMP 5.1 standard.
This implementation is based on an AST transformation providing a de-sugared loop nest. This makes it simple to forward the de-sugared transformation to loop associated directives taking the tiled loops. In contrast to other loop associated directives, the OMPTileDirective does not use CapturedStmts. Letting loop associated directives consume loops from different capture context would be difficult.
A significant amount of code generation logic is taking place in the Sema class. Eventually, I would prefer if these would move into the CodeGen component such that we could make use of the OpenMPIRBuilder, together with flang. Only expressions converting between the language's iteration variable and the logical iteration space need to take place in the semantic analyzer: Getting the of iterations (e.g. the overload resolution of `std::distance`) and converting the logical iteration number to the iteration variable (e.g. overload resolution of `iteration + .omp.iv`). In clang, only CXXForRangeStmt is also represented by its de-sugared components. However, OpenMP loop are not defined as syntatic sugar. Starting with an AST-based approach allows us to gradually move generated AST statements into CodeGen, instead all at once.
I would also like to refactor `checkOpenMPLoop` into its functionalities in a follow-up. In this patch it is used twice. Once for checking proper nesting and emitting diagnostics, and additionally for deriving the logical iteration space per-loop (instead of for the loop nest).
Differential Revision: https://reviews.llvm.org/D76342
- The failures are all cc1-based tests due to the missing `-aux-triple` options,
which is always prepared by the driver in CUDA/HIP compilation.
- Add extra check on the missing aux-targetinfo to prevent crashing.
[hip][cuda] Enable extended lambda support on Windows.
- On Windows, extended lambda has extra issues due to the numbering
schemes are different between the host compilation (Microsoft C++ ABI)
and the device compilation (Itanium C++ ABI. Additional device side
lambda number is required per lambda for the host compilation to
correctly mangle the device-side lambda name.
- A hybrid numbering context `MSHIPNumberingContext` is introduced to
number a lambda for both host- and device-compilations.
Reviewed By: rnk
Differential Revision: https://reviews.llvm.org/D69322
This reverts commit 4874ff0241.
- On Windows, extended lambda has extra issues due to the numbering
schemes are different between the host compilation (Microsoft C++ ABI)
and the device compilation (Itanium C++ ABI. Additional device side
lambda number is required per lambda for the host compilation to
correctly mangle the device-side lambda name.
- A hybrid numbering context `MSHIPNumberingContext` is introduced to
number a lambda for both host- and device-compilations.
Reviewed By: rnk
Differential Revision: https://reviews.llvm.org/D69322
This change makes `DeclarationNameLoc` a proper class and refactors its
users to use getter methods instead of accessing the members directly.
The change also makes `DeclarationNameLoc` immutable (i.e., it cannot
be modified once constructed).
Reviewed By: aprantl
Differential Revision: https://reviews.llvm.org/D94596
Currently, there is some refactoring needed in existing interface of OpenCL option
settings to support OpenCL C 3.0. The problem is that OpenCL extensions and features
are not only determined by the target platform but also by the OpenCL version.
Also, there are core extensions/features which are supported unconditionally in
specific OpenCL C version. In fact, these rules are not being followed for all targets.
For example, there are some targets (as nvptx and r600) which don't support
OpenCL C 2.0 core features (nvptx.languageOptsOpenCL.cl, r600.languageOptsOpenCL.cl).
After the change there will be explicit differentiation between optional core and core
OpenCL features which allows giving diagnostics if target doesn't support any of
necessary core features for specific OpenCL version.
This patch also eliminates `OpenCLOptions` instance duplication from `TargetOptions`.
`OpenCLOptions` instance should take place in `Sema` as it's going to be modified
during parsing. Removing this duplication will also allow to generally simplify
`OpenCLOptions` class for parsing purposes.
Reviewed By: Anastasia
Differential Revision: https://reviews.llvm.org/D92277
Combined with 'da98651 - Revert "DR2064:
decltype(E) is only a dependent', this change (5a391d3) caused verifier
errors when building Chromium. See https://crbug.com/1168494#c1 for a
reproducer.
Additionally it reverts changes that were dependent on this one, see
below.
> Following up on PR48517, fix handling of template arguments that refer
> to dependent declarations.
>
> Treat an id-expression that names a local variable in a templated
> function as being instantiation-dependent.
>
> This addresses a language defect whereby a reference to a dependent
> declaration can be formed without any construct being value-dependent.
> Fixing that through value-dependence turns out to be problematic, so
> instead this patch takes the approach (proposed on the core reflector)
> of allowing the use of pointers or references to (but not values of)
> dependent declarations inside value-dependent expressions, and instead
> treating template arguments as dependent if they evaluate to a constant
> involving such dependent declarations.
>
> This ends up affecting a bunch of OpenMP tests, due to OpenMP
> imprecisely handling instantiation-dependent constructs, bailing out
> early instead of processing dependent constructs to the extent possible
> when handling the template.
>
> Previously committed as 8c1f2d15b8, and
> reverted because a dependency commit was reverted.
This reverts commit 5a391d38ac.
It also restores clang/test/SemaCXX/coroutines.cpp to its state before
da986511fb.
Revert "[c++20] P1907R1: Support for generalized non-type template arguments of scalar type."
> Previously committed as 9e08e51a20, and
> reverted because a dependency commit was reverted. This incorporates the
> following follow-on commits that were also reverted:
>
> 7e84aa1b81 by Simon Pilgrim
> ed13d8c667 by me
> 95c7b6cadb by Sam McCall
> 430d5d8429 by Dave Zarzycki
This reverts commit 4b574008ae.
Revert "[msabi] Mangle a template argument referring to array-to-pointer decay"
> [msabi] Mangle a template argument referring to array-to-pointer decay
> applied to an array the same as the array itself.
>
> This follows MS ABI, and corrects a regression from the implementation
> of generalized non-type template parameters, where we "forgot" how to
> mangle this case.
This reverts commit 18e093faf7.
Previously committed as 9e08e51a20, and
reverted because a dependency commit was reverted. This incorporates the
following follow-on commits that were also reverted:
7e84aa1b81 by Simon Pilgrim
ed13d8c667 by me
95c7b6cadb by Sam McCall
430d5d8429 by Dave Zarzycki
This patch renames PackStack and related variable names to also contain align across Clang.
As it is right now, Clang already uses one stack to record the information from both #pragma
align and #pragma pack. Leaving it as PackStack is confusing, and could cause people to
ignore #pragma align when developing code that interacts with PackStack.
Differential Revision: https://reviews.llvm.org/D93901
The implementation for (de)serialization of APValues can be shared
between Clang and Swift, so we prefer pushing the methods up
the inheritance hierarchy, instead of having the methods live in
ASTReader/ASTWriter. Fixes rdar://72592937.
Reviewed By: rjmccall
Differential Revision: https://reviews.llvm.org/D94196
Remove the OpenMP clause information from the OMPKinds.def file and use the
information from the new OMP.td file. There is now a single source of truth for the
directives and clauses.
To avoid generate lots of specific small code from tablegen, the macros previously
used in OMPKinds.def are generated almost as identical. This can be polished and
possibly removed in a further patch.
Reviewed By: jdoerfert
Differential Revision: https://reviews.llvm.org/D92955
Remove the OpenMP clause information from the OMPKinds.def file and use the
information from the new OMP.td file. There is now a single source of truth for the
directives and clauses.
To avoid generate lots of specific small code from tablegen, the macros previously
used in OMPKinds.def are generated almost as identical. This can be polished and
possibly removed in a further patch.
Reviewed By: jdoerfert
Differential Revision: https://reviews.llvm.org/D92955
Reviewed here: https://reviews.llvm.org/D91409 by Aaron.
Highlights of the review:
- avoid an underlying type for enums
- avoid enum bit fields (MSVC packing anomalies) and favor static_casts to unsigned bit-fields
Patch by Thorsten Schuett <schuett@gmail.com> w some minor fixes in SemaType.cpp where a couple asserts had to be repaired to deal with lack of implicit coversion to int.
Thanks Thorsten!
In order not to modify the `tgt_target_data_update` information but still be
able to pass the extra information for non-contiguous map item (offset,
count, and stride for each dimension), this patch overload `arg` when
the maptype is set as `OMP_MAP_DESCRIPTOR`. The origin `arg` is for
passing the pointer information, however, the overloaded `arg` is an
array of descriptor_dim:
struct descriptor_dim {
int64_t offset;
int64_t count;
int64_t stride
};
and the array size is the same as dimension size. In addition, since we
have count and stride information in descriptor_dim, we can replace/overload the
`arg_size` parameter by using dimension size.
For supporting `stride` in array section, we use a dummy dimension in
descriptor to store the unit size. The formula for counting the stride
in dimension D_n: `unit size * (D_0 * D_1 ... * D_n-1) * D_n.stride`.
Demonstrate how it works:
```
double arr[3][4][5];
D0: { offset = 0, count = 1, stride = 8 } // offset, count, dimension size always be 0, 1, 1 for this extra dimension, stride is the unit size
D1: { offset = 0, count = 2, stride = 8 * 1 * 2 = 16 } // stride = unit size * (product of dimension size of D0) * D1.stride = 4 * 1 * 2 = 8
D2: { offset = 2, count = 2, stride = 8 * (1 * 5) * 1 = 40 } // stride = unit size * (product of dimension size of D0, D1) * D2.stride = 4 * 5 * 1 = 20
D3: { offset = 0, count = 2, stride = 8 * (1 * 5 * 4) * 2 = 320 } // stride = unit size * (product of dimension size of D0, D1, D2) * D3.stride = 4 * 25 * 2 = 200
// X here means we need to offload this data, therefore, runtime will transfer
// data from offset 80, 96, 120, 136, 400, 416, 440, 456
// Runtime patch: https://reviews.llvm.org/D82245
// OOOOO OOOOO OOOOO
// OOOOO OOOOO OOOOO
// XOXOO OOOOO XOXOO
// XOXOO OOOOO XOXOO
```
Reviewed By: ABataev
Differential Revision: https://reviews.llvm.org/D84192
The behavior is controlled by the `-fprebuilt-implicit-modules` option, and
allows searching for implicit modules in the prebuilt module cache paths.
The current command-line options for prebuilt modules do not allow to easily
maintain and use multiple versions of modules. Both the producer and users of
prebuilt modules are required to know the relationships between compilation
options and module file paths. Using a particular version of a prebuilt module
requires passing a particular option on the command line (e.g.
`-fmodule-file=[<name>=]<file>` or `-fprebuilt-module-path=<directory>`).
However the compiler already knows how to distinguish and automatically locate
implicit modules. Hence this proposal to introduce the
`-fprebuilt-implicit-modules` option. When set, it enables searching for
implicit modules in the prebuilt module paths (specified via
`-fprebuilt-module-path`). To not modify existing behavior, this search takes
place after the standard search for prebuilt modules. If not
Here is a workflow illustrating how both the producer and consumer of prebuilt
modules would need to know what versions of prebuilt modules are available and
where they are located.
clang -cc1 -x c modulemap -fmodules -emit-module -fmodule-name=foo -fmodules-cache-path=prebuilt_modules_v1 <config 1 options>
clang -cc1 -x c modulemap -fmodules -emit-module -fmodule-name=foo -fmodules-cache-path=prebuilt_modules_v2 <config 2 options>
clang -cc1 -x c modulemap -fmodules -emit-module -fmodule-name=foo -fmodules-cache-path=prebuilt_modules_v3 <config 3 options>
clang -cc1 -x c use.c -fmodules fmodule-map-file=modulemap -fprebuilt-module-path=prebuilt_modules_v1 <config 1 options>
clang -cc1 -x c use.c -fmodules fmodule-map-file=modulemap <non-prebuilt config options>
With prebuilt implicit modules, the producer can generate prebuilt modules as
usual, all in the same output directory. The same mechanisms as for implicit
modules take care of incorporating hashes in the path to distinguish between
module versions.
Note that we do not specify the output module filename, so `-o` implicit modules are generated in the cache path `prebuilt_modules`.
clang -cc1 -x c modulemap -fmodules -emit-module -fmodule-name=foo -fmodules-cache-path=prebuilt_modules <config 1 options>
clang -cc1 -x c modulemap -fmodules -emit-module -fmodule-name=foo -fmodules-cache-path=prebuilt_modules <config 2 options>
clang -cc1 -x c modulemap -fmodules -emit-module -fmodule-name=foo -fmodules-cache-path=prebuilt_modules <config 3 options>
The user can now simply enable prebuilt implicit modules and point to the
prebuilt modules cache. No need to "parse" command-line options to decide
what prebuilt modules (paths) to use.
clang -cc1 -x c use.c -fmodules fmodule-map-file=modulemap -fprebuilt-module-path=prebuilt_modules -fprebuilt-implicit-modules <config 1 options>
clang -cc1 -x c use.c -fmodules fmodule-map-file=modulemap -fprebuilt-module-path=prebuilt_modules -fprebuilt-implicit-modules <non-prebuilt config options>
This is for example particularly useful in a use-case where compilation is
expensive, and the configurations expected to be used are predictable, but not
controlled by the producer of prebuilt modules. Modules for the set of
predictable configurations can be prebuilt, and using them does not require
"parsing" the configuration (command-line options).
Reviewed By: Bigcheese
Differential Revision: https://reviews.llvm.org/D68997
It turns out that `FileInfo` *always* has a ContentCache. Clarify that
in the code:
- Update the private version of `SourceManager::createFileID` to take a
`ContentCache&` instead of `ContentCache*`, and rename it to
`createFileIDImpl` for clarity.
- Change `FileInfo::getContentCache` to return a reference.
Differential Revision: https://reviews.llvm.org/D89554
Replace `ContentCache::getRawBuffer` with `getBufferDataIfLoaded` and
`getBufferIfLoaded`, excising another accessor for the underlying
`MemoryBuffer*` in favour of `StringRef` and `MemoryBufferRef`.
Differential Revision: https://reviews.llvm.org/D89445
Changes:
- initializer expressions of constexpr variable are now wraped in a ConstantExpr. this is mainly used for testing purposes. the old caching system has not yet been removed.
- Add all the missing Serialization and Importing for APValue.
- Improve dumping of APValue when ASTContext isn't available.
- Cleanup leftover from last patch.
- Add Tests for Import and serialization.
Differential Revision: https://reviews.llvm.org/D63640
Instead of framing the interface around whether the variable is an ICE
(which is only interesting in C++98), primarily track whether the
initializer is a constant initializer (which is interesting in all C++
language modes).
No functionality change intended.
for which it matters.
This is a step towards separating checking for a constant initializer
(in which std::is_constant_evaluated returns true) and any other
evaluation of a variable initializer (in which it returns false).
Remove `ContentCache::getBuffer`, which always returned a
dereferenceable `MemoryBuffer*` and had a `bool*Invalid` out parameter,
and replace it with:
- `ContentCache::getBufferOrNone`, which returns
`Optional<MemoryBufferRef>`. This is the new API that consumers should
use. Later it could be renamed to `getBuffer`, but intentionally using
a different name to root out any unexpected callers.
- `ContentCache::getBufferPointer`, which returns `MemoryBuffer*` with
"optional" semantics. This is `private` to avoid growing callers and
`SourceManager` has temporarily been made a `friend` to access it.
Later paches will update the transitive callers to not need a raw
pointer, and eventually this will be deleted.
No functionality change intended here.
Differential Revision: https://reviews.llvm.org/D89348
Instead of relying on whether a certain identifier is a builtin, introduce BuiltinAttr to specify a declaration as having builtin semantics.
This fixes incompatible redeclarations of builtins, as reverting the identifier as being builtin due to one incompatible redeclaration would have broken rest of the builtin calls.
Mostly-compatible redeclarations of builtins also no longer have builtin semantics. They don't call the builtin nor inherit their attributes.
A long-standing FIXME regarding builtins inside a namespace enclosed in extern "C" not being recognized is also addressed.
Due to the more correct handling attributes for builtin functions are added in more places, resulting in more useful warnings.
Tests are updated to reflect that.
Intrinsics without an inline definition in intrin.h had `inline` and `static` removed as they had no effect and caused them to no longer be recognized as builtins otherwise.
A pthread_create() related test is XFAIL-ed, as it relied on it being recognized as a builtin based on its name.
The builtin declaration syntax is too restrictive and doesn't allow custom structs, function pointers, etc.
It seems to be the only case and fixing this would require reworking the current builtin syntax, so this seems acceptable.
Fixes PR45410.
Reviewed By: rsmith, yutsumi
Differential Revision: https://reviews.llvm.org/D77491
This patch defaults to -mtune=generic unless -march is present. If -march is present we'll use the empty string unless its overridden by mtune. The back should use the target cpu if the tune-cpu isn't present.
It also adds AST serialization support to fix some tests that emit AST and parse it back. These tests diff the IR against the output from not going through AST. So if we don't serialize the tune CPU we fail the diff.
Differential Revision: https://reviews.llvm.org/D86488
This patch moves FixedPointSemantics and APFixedPoint
from Clang to LLVM ADT.
This will make it easier to use the fixed-point
classes in LLVM for constructing an IR builder for
fixed-point and for reusing the APFixedPoint class
for constant evaluation purposes.
RFC: http://lists.llvm.org/pipermail/llvm-dev/2020-August/144025.html
Reviewed By: leonardchan, rjmccall
Differential Revision: https://reviews.llvm.org/D85312
Summary:
Introduced OMPChildren class to handle all associated clauses, statement
and child expressions/statements. It allows to represent some directives
more correctly (like flush, depobj etc. with pseudo clauses, ordered
depend directives, which are standalone, and target data directives).
Also, it will make easier to avoid using of CapturedStmt in directives,
if required (atomic, tile etc. directives).
Also, it simplifies serialization/deserialization of the
executable/declarative directives.
Reduces number of allocation operations for mapper declarations.
Reviewers: jdoerfert
Subscribers: yaxunl, guansong, jfb, cfe-commits, sstefan1, aaron.ballman, caomhin
Tags: #clang
Differential Revision: https://reviews.llvm.org/D83261
This patch implements Clang front end support for the OpenMP TR8
`present` motion modifier for `omp target update` directives. The
next patch in this series implements OpenMP runtime support.
Reviewed By: ABataev
Differential Revision: https://reviews.llvm.org/D84711
This patch implements Clang front end support for the OpenMP TR8
`present` motion modifier for `omp target update` directives. The
next patch in this series implements OpenMP runtime support.
Reviewed By: ABataev
Differential Revision: https://reviews.llvm.org/D84711
I was trying to pick this up a bit when reviewing D48426 (& perhaps D69778) - in any case, looks like D48426 added a module level flag that might not be needed.
The D48426 implementation worked by setting a module level flag, then code generating contents from the PCH a special case in ASTContext::DeclMustBeEmitted would be used to delay emitting the definition of these functions if they came from a Module with this flag.
This strategy is similar to the one initially implemented for modular codegen that was removed in D29901 in favor of the modular decls list and a bit on each decl to specify whether it's homed to a module.
One major difference between PCH object support and modular code generation, other than the specific list of decls that are homed, is the compilation model: MSVC PCH modules are built into the object file for some other source file (when compiling that source file /Yc is specified to say "this compilation is where the PCH is homed"), whereas modular code generation invokes a separate compilation for the PCH alone. So the current modular code generation test of to decide if a decl should be emitted "is the module where this decl is serialized the current main file" has to be extended (as Lubos did in D69778) to also test the command line flag -building-pch-with-obj.
Otherwise the whole thing is basically streamlined down to the modular code generation path.
This even offers one extra material improvement compared to the existing divergent implementation: Homed functions are not emitted into object files that use the pch. Instead at -O0 they are not emitted into the IR at all, and at -O1 they are emitted using available_externally (existing functionality implemented for modular code generation). The pch-codegen test has been updated to reflect this new behavior.
[If possible: I'd love it if we could not have the extra MSVC-style way of accessing dllexport-pch-homing, and just do it the modular codegen way, but I understand that it might be a limitation of existing build systems. @hans / @thakis: Do either of you know if it'd be practical to move to something more similar to .pcm handling, where the pch itself is passed to the compilation, rather than homed as a side effect of compiling some other source file?]
Reviewers: llunak, hans
Differential Revision: https://reviews.llvm.org/D83652
Allow to build PCH's (with -building-pch-with-obj and the extra .o file)
with -fmodules-codegen -fmodules-debuginfo to allow emitting shared code
into the extra .o file, similarly to how it works with modules. A bit of
a misnomer, but the underlying functionality is the same. This saves up
to 20% of build time here. The patch is fairly simple, it basically just
duplicates -fmodules checks to also alternatively check
-building-pch-with-obj.
This already got committed as cbc9d22e49,
but then got reverted in 7ea9a6e022
because of PR44953, as discussed in D74846. This is a corrected version
which does not include two places for the PCH case that aren't included
in the modules -fmodules-codegen path either.
Differential Revision: https://reviews.llvm.org/D69778
This reverts commit defd43a5b3.
with correction to solve msan report
To solve https://bugs.llvm.org/show_bug.cgi?id=46166 where the
floating point settings in PCH files aren't compatible, rewrite
FPFeatures to use a delta in the settings rather than absolute settings.
With this patch, these floating point options can be benign.
Reviewers: rjmccall
Differential Revision: https://reviews.llvm.org/D81869
This reverts commit b55d723ed6.
Reapply Modify FPFeatures to use delta not absolute settings
To solve https://bugs.llvm.org/show_bug.cgi?id=46166 where the
floating point settings in PCH files aren't compatible, rewrite
FPFeatures to use a delta in the settings rather than absolute settings.
With this patch, these floating point options can be benign.
Reviewers: rjmccall
Differential Revision: https://reviews.llvm.org/D81869
Also invert the sense of the return value.
As pointed out by the FIXME that this change resolves, isHidden() wasn't
a very accurate name for this function.
I haven't yet changed any of the strings that are output in
ASTDumper.cpp / JSONNodeDumper.cpp / TextNodeDumper.cpp in response to
whether isHidden() is set because
a) I'm not sure whether it's actually desired to change these strings
(would appreciate feedback on this), and
b) In any case, I'd like to get this pure rename out of the way first,
without any changes to tests. Changing the strings that are output in
the various ...Dumper.cpp files will require changes to quite a few
tests, and I'd like to make those in a separate change.
Differential Revision: https://reviews.llvm.org/D81392
Reviewed By: rsmith
Summary:
This record is constructed by hashing the bytes of the AST block in a similiar
fashion to the SIGNATURE record. This new signature only means anything if the
AST block is fully relocatable, i.e. it does not embed absolute offsets within
the PCM file. This change ensure this does not happen by replacing these offsets
with offsets relative to the nearest relevant subblock of the AST block.
Reviewers: Bigcheese, dexonsmith
Subscribers: dexonsmith, cfe-commits
Tags: #clang
Differential Revision: https://reviews.llvm.org/D80383
This operator is intended for casting between
pointers to objects in different address spaces
and follows similar logic as const_cast in C++.
Tags: #clang
Differential Revision: https://reviews.llvm.org/D60193
This patch adds a matrix type to Clang as described in the draft
specification in clang/docs/MatrixSupport.rst. It introduces a new option
-fenable-matrix, which can be used to enable the matrix support.
The patch adds new MatrixType and DependentSizedMatrixType types along
with the plumbing required. Loads of and stores to pointers to matrix
values are lowered to memory operations on 1-D IR arrays. After loading,
the loaded values are cast to a vector. This ensures matrix values use
the alignment of the element type, instead of LLVM's large vector
alignment.
The operators and builtins described in the draft spec will will be added in
follow-up patches.
Reviewers: martong, rsmith, Bigcheese, anemet, dexonsmith, rjmccall, aaron.ballman
Reviewed By: rjmccall
Differential Revision: https://reviews.llvm.org/D72281
test cases
Add support for #pragma float_control
Reviewers: rjmccall, erichkeane, sepavloff
Differential Revision: https://reviews.llvm.org/D72841
This reverts commit 85dc033cac, and makes
corrections to the test cases that failed on buildbots.
Fix a few bugs where we would fail to properly determine header to
module correspondence when determining whether to suggest a #include or
import, and suggest a #include more often in language modes where there
is no import syntax. Generally, if the target is in a header with
include guards or #pragma once, we should suggest either #including or
importing that header, and not importing a module that happens to
textually include it.
In passing, improve the notes we attach to the corresponding
diagnostics: calling an entity that we couldn't see "previous" is
confusing.
whether they have missing header files.
Whether a module's headers happen to be present on the local file system
should make no difference to whether we make its contents visible when
importing another module that re-exports it. If we have an up-to-date
AST file that we can load, that's all that matters.
This fixes the ability to header syntax checking for modular headers in
C++20 mode (or in prior modes where -fmodules-local-submodule-visibility
is enabled but -fmodules is not).
This reverts commit 61ba1481e2.
I'm reverting this because it breaks the lldb build with
incomplete switch coverage warnings. I would fix it forward,
but am not familiar enough with lldb to determine the correct
fix.
lldb/source/Plugins/TypeSystem/Clang/TypeSystemClang.cpp:3958:11: error: enumeration values 'DependentExtInt' and 'ExtInt' not handled in switch [-Werror,-Wswitch]
switch (qual_type->getTypeClass()) {
^
lldb/source/Plugins/TypeSystem/Clang/TypeSystemClang.cpp:4633:11: error: enumeration values 'DependentExtInt' and 'ExtInt' not handled in switch [-Werror,-Wswitch]
switch (qual_type->getTypeClass()) {
^
lldb/source/Plugins/TypeSystem/Clang/TypeSystemClang.cpp:4889:11: error: enumeration values 'DependentExtInt' and 'ExtInt' not handled in switch [-Werror,-Wswitch]
switch (qual_type->getTypeClass()) {
Introduction/Motivation:
LLVM-IR supports integers of non-power-of-2 bitwidth, in the iN syntax.
Integers of non-power-of-two aren't particularly interesting or useful
on most hardware, so much so that no language in Clang has been
motivated to expose it before.
However, in the case of FPGA hardware normal integer types where the
full bitwidth isn't used, is extremely wasteful and has severe
performance/space concerns. Because of this, Intel has introduced this
functionality in the High Level Synthesis compiler[0]
under the name "Arbitrary Precision Integer" (ap_int for short). This
has been extremely useful and effective for our users, permitting them
to optimize their storage and operation space on an architecture where
both can be extremely expensive.
We are proposing upstreaming a more palatable version of this to the
community, in the form of this proposal and accompanying patch. We are
proposing the syntax _ExtInt(N). We intend to propose this to the WG14
committee[1], and the underscore-capital seems like the active direction
for a WG14 paper's acceptance. An alternative that Richard Smith
suggested on the initial review was __int(N), however we believe that
is much less acceptable by WG14. We considered _Int, however _Int is
used as an identifier in libstdc++ and there is no good way to fall
back to an identifier (since _Int(5) is indistinguishable from an
unnamed initializer of a template type named _Int).
[0]https://www.intel.com/content/www/us/en/software/programmable/quartus-prime/hls-compiler.html)
[1]http://www.open-std.org/jtc1/sc22/wg14/www/docs/n2472.pdf
Differential Revision: https://reviews.llvm.org/D73967
Summary:
Clang uses 32-bit integers for storing bit offsets from the beginning of
the file that results in 512M limit on AST file. This diff replaces
absolute offsets with relative offsets from the beginning of
corresponding data structure when it is possible. And uses 64-bit
offsets for DeclOffests and TypeOffssts because these coder AST
section may easily exceeds 512M alone.
This diff breaks AST file format compatibility so VERSION_MAJOR bumped.
Test Plan:
Existing clang AST serialization tests
Tested on clangd with ~700M and ~900M preamble files
check-clang with ubsan
Reviewers: rsmith, dexonsmith
Subscribers: ilya-biryukov, kadircet, usaxena95, cfe-commits
Tags: #clang
Differential Revision: https://reviews.llvm.org/D76594
Summary:
Clang uses 32-bit integers for storing bit offsets from the beginning of
the file that results in 512M limit on AST file. This diff replaces
absolute offsets with relative offsets from the beginning of
corresponding data structure when it is possible. And uses 64-bit
offsets for DeclOffests and TypeOffssts because these coder AST
section may easily exceeds 512M alone.
This diff breaks AST file format compatibility so VERSION_MAJOR bumped.
Test Plan:
Existing clang AST serialization tests
Tested on clangd with ~700M and ~900M preamble files
Reviewers: rsmith, dexonsmith
Subscribers: ilya-biryukov, kadircet, usaxena95, cfe-commits
Tags: #clang
Differential Revision: https://reviews.llvm.org/D76594
Summary:
Previously, we treated CXXUuidofExpr as quite a special case: it was the
only kind of expression that could be a canonical template argument, it
could be a constant lvalue base object, and so on. In addition, we
represented the UUID value as a string, whose source form we did not
preserve faithfully, and that we partially parsed in multiple different
places.
With this patch, we create an MSGuidDecl object to represent the
implicit object of type 'struct _GUID' created by a UuidAttr. Each
UuidAttr holds a pointer to its 'struct _GUID' and its original
(as-written) UUID string. A non-value-dependent CXXUuidofExpr behaves
like a DeclRefExpr denoting that MSGuidDecl object. We cache an APValue
representation of the GUID on the MSGuidDecl and use it from constant
evaluation where needed.
This allows removing a lot of the special-case logic to handle these
expressions. Unfortunately, many parts of Clang assume there are only
a couple of interesting kinds of ValueDecl, so the total amount of
special-case logic is not really reduced very much.
This fixes a few bugs and issues:
* PR38490: we now support reading from GUID objects returned from
__uuidof during constant evaluation.
* Our Itanium mangling for a non-instantiation-dependent template
argument involving __uuidof no longer depends on which CXXUuidofExpr
template argument we happened to see first.
* We now predeclare ::_GUID, and permit use of __uuidof without
any header inclusion, better matching MSVC's behavior. We do not
predefine ::__s_GUID, though; that seems like a step too far.
* Our IR representation for GUID constants now uses the correct IR type
wherever possible. We will still fall back to using the
{i32, i16, i16, [8 x i8]}
layout if a definition of struct _GUID is not available. This is not
ideal: in principle the two layouts could have different padding.
Reviewers: rnk, jdoerfert
Subscribers: arphaman, cfe-commits, aeubanks
Tags: #clang
Differential Revision: https://reviews.llvm.org/D78171
Summary:
This patch adds the EXPR_FIXEDPOINT_LITERAL AST
code to serialize FixedPointLiterals. They were previously
being serialized with the code for integer literals, which
doesn't work properly.
Reviewers: leonardchan, rjmccall
Reviewed By: leonardchan, rjmccall
Subscribers: vabridgers, JesperAntonsson, bjope, cfe-commits
Tags: #clang
Differential Revision: https://reviews.llvm.org/D57226
This is a cleanup and normalization patch that also enables reuse with
Flang later on. A follow up will clean up and move the directive ->
clauses mapping.
Reviewed By: fghanim
Differential Revision: https://reviews.llvm.org/D77112
See rational here: https://reviews.llvm.org/D76173#1922916
Time to compile Attr.h in isolation goes from 2.6s to 1.8s.
Original patch by Johannes, plus some additions from Reid to fix some
clang tooling targets.
Effect on transitive includes is marginal, though:
$ diff -u <(sort thedeps-before.txt) <(sort thedeps-after.txt) \
| grep '^[-+] ' | sort | uniq -c | sort -nr
104 - /usr/local/google/home/rnk/llvm-project/clang/include/clang/AST/OpenMPClause.h
87 - /usr/local/google/home/rnk/llvm-project/llvm/include/llvm/Frontend/OpenMP/OMPContext.h
19 - /usr/local/google/home/rnk/llvm-project/llvm/include/llvm/ADT/SmallSet.h
19 - /usr/local/google/home/rnk/llvm-project/llvm/include/llvm/ADT/SetVector.h
14 - /usr/include/c++/9/set
...
Differential Revision: https://reviews.llvm.org/D76184
This is a cleanup and normalization patch that also enables reuse with
Flang later on. A follow up will clean up and move the directive ->
clauses mapping.
Differential Revision: https://reviews.llvm.org/D77112
As per comment on https://reviews.llvm.org/D72860, it is suggested to
revert this change in the meantime, since it has introduced regression.
This reverts commit 83f4c3af02.
This swaps out the OpenMPDefaultClauseKind enum with a
llvm::omp::DefaultKind enum which is stored in OMPConstants.h.
This should not change any functionality.
Reviewed By: jdoerfert
Differential Revision: https://reviews.llvm.org/D74513
This patch implements an almost complete handling of OpenMP
contexts/traits such that we can reuse most of the logic in Flang
through the OMPContext.{h,cpp} in llvm/Frontend/OpenMP.
All but construct SIMD specifiers, e.g., inbranch, and the device ISA
selector are define in `llvm/lib/Frontend/OpenMP/OMPKinds.def`. From
these definitions we generate the enum classes `TraitSet`,
`TraitSelector`, and `TraitProperty` as well as conversion and helper
functions in `llvm/lib/Frontend/OpenMP/OMPContext.{h,cpp}`.
The above enum classes are used in the parser, sema, and the AST
attribute. The latter is not a collection of multiple primitive variant
arguments that contain encodings via numbers and strings but instead a
tree that mirrors the `match` clause (see `struct OpenMPTraitInfo`).
The changes to the parser make it more forgiving when wrong syntax is
read and they also resulted in more specialized diagnostics. The tests
are updated and the core issues are detected as before. Here and
elsewhere this patch tries to be generic, thus we do not distinguish
what selector set, selector, or property is parsed except if they do
behave exceptionally, as for example `user={condition(EXPR)}` does.
The sema logic changed in two ways: First, the OMPDeclareVariantAttr
representation changed, as mentioned above, and the sema was adjusted to
work with the new `OpenMPTraitInfo`. Second, the matching and scoring
logic moved into `OMPContext.{h,cpp}`. It is implemented on a flat
representation of the `match` clause that is not tied to clang.
`OpenMPTraitInfo` provides a method to generate this flat structure (see
`struct VariantMatchInfo`) by computing integer score values and boolean
user conditions from the `clang::Expr` we keep for them.
The OpenMP context is now an explicit object (see `struct OMPContext`).
This is in anticipation of construct traits that need to be tracked. The
OpenMP context, as well as the `VariantMatchInfo`, are basically made up
of a set of active or respectively required traits, e.g., 'host', and an
ordered container of constructs which allows duplication. Matching and
scoring is kept as generic as possible to allow easy extension in the
future.
---
Test changes:
The messages checked in `OpenMP/declare_variant_messages.{c,cpp}` have
been auto generated to match the new warnings and notes of the parser.
The "subset" checks were reversed causing the wrong version to be
picked. The tests have been adjusted to correct this.
We do not print scores if the user did not provide one.
We print spaces to make lists in the `match` clause more legible.
Reviewers: kiranchandramohan, ABataev, RaviNarayanaswamy, gtbercea, grokos, sdmitriev, JonChesterfield, hfinkel, fghanim
Subscribers: merge_guards_bot, rampitec, mgorny, hiraditya, aheejin, fedor.sergeev, simoncook, bollu, guansong, dexonsmith, jfb, s.egerton, llvm-commits, cfe-commits
Tags: #clang, #llvm
Differential Revision: https://reviews.llvm.org/D71830
This is how it should've been and brings it more in line with
std::string_view. There should be no functional change here.
This is mostly mechanical from a custom clang-tidy check, with a lot of
manual fixups. It uncovers a lot of minor inefficiencies.
This doesn't actually modify StringRef yet, I'll do that in a follow-up.
This patch implements P1141R2 "Yet another approach for constrained declarations".
General strategy for this patch was:
- Expand AutoType to include optional type-constraint, reflecting the wording and easing the integration of constraints.
- Replace autos in parameter type specifiers with invented parameters in GetTypeSpecTypeForDeclarator, using the same logic
previously used for generic lambdas, now unified with abbreviated templates, by:
- Tracking the template parameter lists in the Declarator object
- Tracking the template parameter depth before parsing function declarators (at which point we can match template
parameters against scope specifiers to know if we have an explicit template parameter list to append invented parameters
to or not).
- When encountering an AutoType in a parameter context we check a stack of InventedTemplateParameterInfo structures that
contain the info required to create and accumulate invented template parameters (fields that were already present in
LambdaScopeInfo, which now inherits from this class and is looked up when an auto is encountered in a lambda context).
Resubmit after fixing MSAN failures caused by incomplete initialization of AutoTypeLocs in TypeSpecLocFiller.
Differential Revision: https://reviews.llvm.org/D65042
This patch implements P1141R2 "Yet another approach for constrained declarations".
General strategy for this patch was:
- Expand AutoType to include optional type-constraint, reflecting the wording and easing the integration of constraints.
- Replace autos in parameter type specifiers with invented parameters in GetTypeSpecTypeForDeclarator, using the same logic
previously used for generic lambdas, now unified with abbreviated templates, by:
- Tracking the template parameter lists in the Declarator object
- Tracking the template parameter depth before parsing function declarators (at which point we can match template
parameters against scope specifiers to know if we have an explicit template parameter list to append invented parameters
to or not).
- When encountering an AutoType in a parameter context we check a stack of InventedTemplateParameterInfo structures that
contain the info required to create and accumulate invented template parameters (fields that were already present in
LambdaScopeInfo, which now inherits from this class and is looked up when an auto is encountered in a lambda context).
Resubmit after incorrect check in NonTypeTemplateParmDecl broke lldb.
Differential Revision: https://reviews.llvm.org/D65042
This patch implements P1141R2 "Yet another approach for constrained declarations".
General strategy for this patch was:
- Expand AutoType to include optional type-constraint, reflecting the wording and easing the integration of constraints.
- Replace autos in parameter type specifiers with invented parameters in GetTypeSpecTypeForDeclarator, using the same logic
previously used for generic lambdas, now unified with abbreviated templates, by:
- Tracking the template parameter lists in the Declarator object
- Tracking the template parameter depth before parsing function declarators (at which point we can match template
parameters against scope specifiers to know if we have an explicit template parameter list to append invented parameters
to or not).
- When encountering an AutoType in a parameter context we check a stack of InventedTemplateParameterInfo structures that
contain the info required to create and accumulate invented template parameters (fields that were already present in
LambdaScopeInfo, which now inherits from this class and is looked up when an auto is encountered in a lambda context).
Differential Revision: https://reviews.llvm.org/D65042
Implement support for C++2a requires-expressions.
Re-commit after compilation failure on some platforms due to alignment issues with PointerIntPair.
Differential Revision: https://reviews.llvm.org/D50360
Partially reverts 0a2be46cfd as it turned
out to cause redundant module rebuilds in multi-process incremental builds.
When a module was getting out of date, all compilation processes started at the
same time were marking it as `ToBuild`. So each process was building the same
module instead of checking if it was built by someone else and using that
result. In addition to the work duplication, contention on the same .pcm file
wasn't making builds faster.
Note that for a single-process build this change would cause redundant module
reads and validations. But reading a module is faster than building it and
multi-process builds are more common than single-process. So I'm willing to
make such a trade-off.
rdar://problem/54395127
Reviewed By: dexonsmith
Differential Revision: https://reviews.llvm.org/D72860
Allow to build PCH's (with -building-pch-with-obj and the extra .o file)
with -fmodules-codegen -fmodules-debuginfo to allow emitting shared code
into the extra .o file, similarly to how it works with modules. A bit of
a misnomer, but the underlying functionality is the same. This saves up
to 20% of build time here.
Differential Revision: https://reviews.llvm.org/D69778
This removes the OpenMPProcBindClauseKind enum in favor of
llvm::omp::ProcBindKind which lives in OpenMPConstants.h and was
introduced in D70109.
No change in behavior is expected.
Reviewed By: JonChesterfield
Differential Revision: https://reviews.llvm.org/D70289
Summary:
Basic codegen for the declarations marked as nontemporal. Also, if the
base declaration in the member expression is marked as nontemporal,
lvalue for member decl access inherits nonteporal flag from the base
lvalue.
Reviewers: rjmccall, hfinkel, jdoerfert
Subscribers: guansong, arphaman, caomhin, kkwli0, cfe-commits
Tags: #clang
Differential Revision: https://reviews.llvm.org/D71708
Similar motivations to the movement of ASTRecordReader:
AbstractBasicWriter.h already has quite a few dependencies,
and it's going to get pretty large as we generate more and more
into it. Meanwhile, most clients don't depend on this detail of
the implementation and shouldn't need to be recompiled.
I've also made OMPClauseWriter private, like it belongs.
The basic technical design here is that we have three levels
of readers and writers:
- At the lowest level, there's a `Basic{Reader,Writer}` that knows
how to emit the basic structures of the AST. CRTP allows this to
be metaprogrammed so that the client only needs to support a handful
of primitive types (e.g. `uint64_t` and `IdentifierInfo*`) and more
complicated "inline" structures such as `DeclarationName` can just
be emitted in terms of those primitives.
In Clang's binary-serialization code, these are
`ASTRecord{Reader,Writer}`. For now, a large number of basic
structures are still emitted explicitly by code on those classes
rather than by either TableGen or CRTP metaprogramming, but I
expect to move more of these over.
- In the middle, there's a `Property{Reader,Writer}` which is
responsible for processing the properties of a larger object. The
object-level reader/writer asks the property-level reader/writer to
project out a particular property, yielding a basic reader/writer
which will be used to read/write the property's value, like so:
```
propertyWriter.find("count").writeUInt32(node->getCount());
```
Clang's binary-serialization code ignores this level (it uses
the basic reader/writer as the property reader/writer and has the
projection methods just return `*this`) and simply relies on the
roperties being read/written in a stable order.
- At the highest level, there's an object reader/writer (e.g.
`Type{Reader,Writer}` which emits a logical object with properties.
Think of this as writing something like a JSON dictionary literal.
I haven't introduced support for bitcode abbreviations yet --- it
turns out that there aren't any operative abbreviations for types
besides the QualType one --- but I do have some ideas of how they
should work. At any rate, they'll be necessary in order to handle
statements.
I'm sorry for not disentangling the patches that added basic and type
reader/writers; I made some effort to, but I ran out of energy after
disentangling a number of other patches from the work.
Negligible impact on module size, time to build a set of about 20
fairly large modules, or time to read a few declarations out of them.
Summary:
The new OpenMPConstants.h is a location for all OpenMP related constants
(and helpers) to live.
This patch moves the directives there (the enum OpenMPDirectiveKind) and
rewires Clang to use the new location.
Initially part of D69785.
Reviewers: kiranchandramohan, ABataev, RaviNarayanaswamy, gtbercea, grokos, sdmitriev, JonChesterfield, hfinkel, fghanim
Subscribers: jholewinski, ppenzin, penzn, llvm-commits, cfe-commits, jfb, guansong, bollu, hiraditya, mgorny
Tags: #clang, #llvm
Differential Revision: https://reviews.llvm.org/D69853
Remove some cognitive load by renaming clang/Serialization/Module.h to
clang/Serialization/ModuleFile.h, since it declares the ModuleFile
class. This also makes editing a bit easier, since the basename of the
file no long conflicts with clang/Basic/Module.h, which declares the
Module class. Also move lib/Serialization/Module.cpp to
lib/Serialization/ModuleFile.cpp.
Summary:
- HIP/CUDA host side needs to use device kernel symbol name to match the
device side binaries. Without a consistent naming between host- and
device-side compilations, it's risky that wrong device binaries are
executed. Consistent naming is usually not an issue until unnamed
types are used, especially the lambda. In this patch, the consistent
name mangling is addressed for the extended lambdas, i.e. the lambdas
annotated with `__device__`.
- In [Itanium C++ ABI][1], the mangling of the lambda is generally
unspecified unless, in certain cases, ODR rule is required to ensure
consisent naming cross TUs. The extended lambda is such a case as its
name may be part of a device kernel function, e.g., the extended
lambda is used as a template argument and etc. Thus, we need to force
ODR for extended lambdas as they are referenced in both device- and
host-side TUs. Furthermore, if a extended lambda is nested in other
(extended or not) lambdas, those lambdas are required to follow ODR
naming as well. This patch revises the current lambda mangle numbering
to force ODR from an extended lambda to all its parent lambdas.
- On the other side, the aforementioned ODR naming should not change
those lambdas' original linkages, i.e., we cannot replace the original
`internal` with `linkonce_odr`; otherwise, we may violate ODR in
general. This patch introduces a new field `HasKnownInternalLinkage`
in lambda data to decouple the current linkage calculation based on
mangling number assigned.
[1]: https://itanium-cxx-abi.github.io/cxx-abi/abi.html
Reviewers: tra, rsmith, yaxunl, martong, shafik
Subscribers: cfe-commits
Tags: #clang
Differential Revision: https://reviews.llvm.org/D68818
llvm-svn: 375309
The expression of the priority clause must be captured in the combined
task-based directives, like 'parallel master taskloop' directive.
llvm-svn: 375026
Summary:
When files often get touched during builds, the mtime based validation
leads to different problems in implicit modules builds, even when the
content doesn't actually change:
- Modules only: module invalidation due to out of date files. Usually causing rebuild traffic.
- Modules + PCH: build failures because clang cannot rebuild a module if it comes from building a PCH.
- PCH: build failures because clang cannot rebuild a PCH in case one of the input headers has different mtime.
This patch proposes hashing the content of input files (headers and
module maps), which is performed during serialization time. When looking
at input files for validation, clang only computes the hash in case
there's a mtime mismatch.
I've tested a couple of different hash algorithms availble in LLVM in
face of building modules+pch for `#import <Cocoa/Cocoa.h>`:
- `hash_code`: performace diff within the noise, total module cache increased by 0.07%.
- `SHA1`: 5% slowdown. Haven't done real size measurements, but it'd be BLOCK_ID+20 bytes per input file, instead of BLOCK_ID+8 bytes from `hash_code`.
- `MD5`: 3% slowdown. Like above, but BLOCK_ID+16 bytes per input file.
Given the numbers above, the patch uses `hash_code`. The patch also
improves invalidation error msgs to point out which type of problem the
user is facing: "mtime", "size" or "content".
rdar://problem/29320105
Reviewers: dexonsmith, arphaman, rsmith, aprantl
Subscribers: jkorous, cfe-commits, ributzka
Tags: #clang
Differential Revision: https://reviews.llvm.org/D67249
> llvm-svn: 374841
llvm-svn: 374895
Summary:
When files often get touched during builds, the mtime based validation
leads to different problems in implicit modules builds, even when the
content doesn't actually change:
- Modules only: module invalidation due to out of date files. Usually causing rebuild traffic.
- Modules + PCH: build failures because clang cannot rebuild a module if it comes from building a PCH.
- PCH: build failures because clang cannot rebuild a PCH in case one of the input headers has different mtime.
This patch proposes hashing the content of input files (headers and
module maps), which is performed during serialization time. When looking
at input files for validation, clang only computes the hash in case
there's a mtime mismatch.
I've tested a couple of different hash algorithms availble in LLVM in
face of building modules+pch for `#import <Cocoa/Cocoa.h>`:
- `hash_code`: performace diff within the noise, total module cache increased by 0.07%.
- `SHA1`: 5% slowdown. Haven't done real size measurements, but it'd be BLOCK_ID+20 bytes per input file, instead of BLOCK_ID+8 bytes from `hash_code`.
- `MD5`: 3% slowdown. Like above, but BLOCK_ID+16 bytes per input file.
Given the numbers above, the patch uses `hash_code`. The patch also
improves invalidation error msgs to point out which type of problem the
user is facing: "mtime", "size" or "content".
rdar://problem/29320105
Reviewers: dexonsmith, arphaman, rsmith, aprantl
Subscribers: jkorous, cfe-commits, ributzka
Tags: #clang
Differential Revision: https://reviews.llvm.org/D67249
llvm-svn: 374841
The expression of the num_tasks clause must be captured in the combined
task-based directives, like 'parallel master taskloop' directive.
llvm-svn: 374819
The expression of the grainsize clause must be captured in the combined
task-based directives, like 'parallel master taskloop' directive.
llvm-svn: 374810
file.
Reduces duplication and thereby reduces the risk that someone will
forget to update one of these places, as I did when adding
DefaultedDestructorIsConstexpr (though I've been unable to produce
a testcase for which that matters so far).
llvm-svn: 374484
We previously failed to treat an array with an instantiation-dependent
but not value-dependent bound as being an instantiation-dependent type.
We now track the array bound expression as part of a constant array type
if it's an instantiation-dependent expression.
llvm-svn: 373685
In order to enable future improvements to our attribute diagnostics,
this moves info from ParsedAttr into CommonAttributeInfo, then makes
this type the base of the *Attr and ParsedAttr types. Quite a bit of
refactoring took place, including removing a bunch of redundant Spelling
Index propogation.
Differential Revision: https://reviews.llvm.org/D67368
llvm-svn: 371875
Refactor ContentCache::IsSystemFile to IsFileVolatile, checking
SourceManager::userFilesAreVolatile at construction time. This is a
step toward lowering ContentCache down from SourceManager to
FileManager.
No functionality change intended.
https://reviews.llvm.org/D66713
llvm-svn: 369958
when the FileManager is reused across invocations
This commit introduces a parallel API to FileManager's getFile: getFileEntryRef, which returns
a reference to the FileEntry, and the name that was used to access the file. In the case of
a VFS with 'use-external-names', the FileEntyRef contains the external name of the file,
not the filename that was used to access it.
The new API is adopted only in the HeaderSearch and Preprocessor for include file lookup, so that the
accessed path can be propagated to SourceManager's FileInfo. SourceManager's FileInfo now can report this accessed path, using
the new getName method. This API is then adopted in the dependency collector, which now correctly reports dependencies when a file
is included both using a symlink and a real path in the case when the FileManager is reused across multiple Preprocessor invocations.
Note that this patch does not fix all dependency collector issues, as the same problem is still present in other cases when dependencies
are obtained using FileSkipped, InclusionDirective, and HasInclude. This will be fixed in follow-up commits.
Differential Revision: https://reviews.llvm.org/D65907
llvm-svn: 369680
- Create ASTContext::attachCommentsToJustParsedDecls so we don't have to load external comments in Sema when trying to attach existing comments to just parsed Decls.
- Keep comments ordered and cache their decomposed location - faster SourceLoc-based searching.
- Optimize work with redeclarations.
- Keep one comment per redeclaration chain (represented by canonical Decl) instead of comment per redeclaration.
- For redeclaration chains with no comment attached keep just the last declaration in chain that had no comment instead of every comment-less redeclaration.
Differential Revision: https://reviews.llvm.org/D65301
llvm-svn: 368732
Wei Wang