A long time ago LLDB wanted to start using StringRef instead of
C-Strings/ConstString but was blocked by the fact that the StringRef constructor
that takes a C-string was asserting that the C-string isn't a nullptr. To
workaround this, D24697 introduced a special function called `withNullAsEmpty`
and that's what LLDB (and only LLDB) started to use to build StringRefs from
C-strings.
A bit later it seems that `withNullAsEmpty` was declared too awkward to use and
instead the assert in the StringRef constructor got removed (see D24904). The
rest of LLDB was then converted to StringRef by just calling the now perfectly
usable implicit constructor.
However, all the calls to `withNullAsEmpty` just remained and are now just
strange artefacts in the code base that just look out of place. It's also
curiously a LLDB-exclusive function and no other project ever called it since
it's introduction half a decade ago.
This patch removes all uses of `withNullAsEmpty`. The follow up will be to
remove the function from StringRef.
Reviewed By: JDevlieghere
Differential Revision: https://reviews.llvm.org/D102597
This implements the interactive trace start and stop methods.
This diff ended up being much larger than I anticipated because, by doing it, I found that I had implemented in the beginning many things in a non optimal way. In any case, the code is much better now.
There's a lot of boilerplate code due to the gdb-remote protocol, but the main changes are:
- New tracing packets: jLLDBTraceStop, jLLDBTraceStart, jLLDBTraceGetBinaryData. The gdb-remote packet definitions are quite comprehensive.
- Implementation of the "process trace start|stop" and "thread trace start|stop" commands.
- Implementaiton of an API in Trace.h to interact with live traces.
- Created an IntelPTDecoder for live threads, that use the debugger's stop id as checkpoint for its internal cache.
- Added a functionality to stop the process in case "process tracing" is enabled and a new thread can't traced.
- Added tests
I have some ideas to unify the code paths for post mortem and live threads, but I'll do that in another diff.
Differential Revision: https://reviews.llvm.org/D91679
This patch introduces a new interpreter setting to prevent LLDB from
re-executing the previous command when passing an empty command.
This can be very useful when performing actions that requires a long
time to complete.
To preserve the original behaviour, the setting defaults to `true`.
rdar://74983516
Differential Revision: https://reviews.llvm.org/D97999
Signed-off-by: Med Ismail Bennani <medismail.bennani@gmail.com>
The 'r' and 'run' aliases were different based on the target
architecture. I suspect the intention was to disable shell expansion on
embedded devices. This fixes TestCustomShell.test on AS.
GetCommandSPExact is called exaclty once with include_aliases set to
true, so make it a default argument. Use early returns to simplify the
implementation.
This patch introduces a LLDB_SCOPED_TIMER macro to hide the needlessly
repetitive creation of scoped timers in LLDB. It's similar to the
LLDB_LOG(F) macro.
Differential revision: https://reviews.llvm.org/D93663
This reverts commit a01b26fb51, because it
breaks the "finish" command in some way -- the command does not
terminate after it steps out, but continues running the target. The
exact blast radius is not clear, but it at least affects the usage of
the "finish" command in TestGuiBasicDebug.py. The error is *not*
gui-related, as the same issue can be reproduced by running the same
steps outside of the gui.
There is some kind of a race going on, as the test fails only 20% of the
time on the buildbot.
Currently, the interpreter's context is not updated until a command is executed.
This has resulted in the behavior of SB-interface functions and some commands
depends on previous user actions. The interpreter's context can stay uninitialized,
point to a currently selected target, or point to one of previously selected targets.
This patch removes any usages of CommandInterpreter::UpdateExecutionContext.
CommandInterpreter::HandleCommand* functions still may override context temporarily,
but now they always restore it before exiting. CommandInterpreter saves overriden
contexts to the stack, that makes nesting commands possible.
Added test reproduces one of the issues. Without this fix, the last assertion fails
because interpreter's execution context is empty until running "target list", so,
the value of the global property was updated instead of process's local instance.
Differential Revision: https://reviews.llvm.org/D92164
The intention is not to allow stop-hook commands to query the
user, so this is correct. It also works around a deadlock in
switching to the Python Session to execute python based commands
in the stop hook when the Debugger stdin is backed by a FILE *.
Differential Revision: https://reviews.llvm.org/D90332
Make it possible to use a relative path in command script import to the
location of the file being sourced. This allows the user to put Python
scripts next to LLDB command files and importing them without having to
specify an absolute path.
To enable this behavior pass `-c` to `command script import`. The
argument can only be used when sourcing the command from a file.
rdar://68310384
Differential revision: https://reviews.llvm.org/D89334
This is the first in a series of patches that will adds a new processor trace plug-in to LLDB.
The idea for this first patch to to add the plug-in interface with simple commands for the trace files that can "load" and "dump" the trace information. We can test the functionality and ensure people are happy with the way things are done and how things are organized before moving on to adding more functionality.
Processor trace information can be view in a few different ways:
- post mortem where a trace is saved off that can be viewed later in the debugger
- gathered while a process is running and allow the user to step back in time (with no variables, memory or registers) to see how each thread arrived at where it is currently stopped.
This patch attempts to start with the first solution of loading a trace file after the fact. The idea is that we will use a JSON file to load the trace information. JSON allows us to specify information about the trace like:
- plug-in name in LLDB
- path to trace file
- shared library load information so we can re-create a target and symbolicate the information in the trace
- any other info that the trace plug-in will need to be able to successfully parse the trace information
- cpu type
- version info
- ???
A new "trace" command was added at the top level of the LLDB commmands:
- "trace load"
- "trace dump"
I did this because if we load trace information we don't need to have a process and we might end up creating a new target for the trace information that will become active. If anyone has any input on where this would be better suited, please let me know. Walter Erquinigo will end up filling in the Intel PT specific plug-in so that it works and is tested once we can agree that the direction of this patch is the correct one, so please feel free to chime in with ideas on comments!
Reviewed By: clayborg
Differential Revision: https://reviews.llvm.org/D85705
Previously, before loading the REPL language-specific init file, lldb
checked the selected target language in which case it returned an unknown
language type with the REPL target.
Instead, the patch calls `Language::GetLanguagesSupportingREPLs` and
look for the first element of that set. In case lldb was not configured
with a REPL language, then, it will just stop sourcing the REPL init
file and fallback to the original logic (continuing with the default
init file).
rdar://65836048
Differential Revision: https://reviews.llvm.org/D87076
Signed-off-by: Med Ismail Bennani <medismail.bennani@gmail.com>
Move the CommandObjectScript and CommandObjectRegexCommand under
Commands where all the other CommandObject implementations live.
Although neither implementations currently use the TableGen-generated
CommandOptions.inc, this move would have been necessary anyway if they
were to in the future.
This patch changes the command interpreter sourcing logic for the REPL
init file. Instead of looking for a arbitrary file name, it standardizes
the REPL init file name to match to following scheme:
`.lldbinit-<language>-repl`
This will make the naming more homogenous and the sourcing logic future-proof.
rdar://65836048
Differential Revision: https://reviews.llvm.org/D86987
Signed-off-by: Med Ismail Bennani <medismail.bennani@gmail.com>
Extract all the provider related logic from Reproducer.h and move it
into its own header ReproducerProvider.h. These classes are seeing most
of the development these days and this reorganization reduces
incremental compilation from ~520 to ~110 files when making changes to
the new header.
Provider a wrapper around llvm::sys::path::home_directory in the
FileSystem class. This will make it possible for the reproducers to
intercept the call in a central place.
This patch adds the infrastructure to have language specific REPL init
files. It's the foundation work to a following patch that will introduce
Swift REPL init file.
When lldb is launched with the `--repl` option, it will look for a REPL
init file in the home directory and source it. This overrides the
default `~/.lldbinit`, which content might make the REPL behave
unexpectedly. If the REPL init file doesn't exists, lldb will fall back
to the default init file.
rdar://65836048
Differential Revision: https://reviews.llvm.org/D86242
Signed-off-by: Med Ismail Bennani <medismail.bennani@gmail.com>
This is relanding D81001. The patch originally failed as on newer editline
versions it seems CC_REFRESH will move the cursor to the start of the line via
\r and then back to the original position. On older editline versions like
the one used by default on macOS, CC_REFRESH doesn't move the cursor at all.
As the patch changed the way we handle tab completion (previously we did
REDISPLAY but now we're doing CC_REFRESH), this caused a few completion tests
to receive this unexpected cursor movement in the output stream.
This patch updates those tests to also accept output that contains the specific
cursor movement commands (\r and then \x1b[XC). lldbpexpect.py received an
utility method for generating the cursor movement escape sequence.
Original summary:
I implemented autosuggestion if there is one possible suggestion.
I set the keybinds for every character. When a character is typed, Editline::TypedCharacter is called.
Then, autosuggestion part is displayed in gray, and you can actually input by typing C-k.
Editline::Autosuggest is a function for finding completion, and it is like Editline::TabCommand now, but I will add more features to it.
Testing does not work well in my environment, so I can't confirm that it goes well, sorry. I am dealing with it now.
Reviewed By: teemperor, JDevlieghere, #lldb
Differential Revision: https://reviews.llvm.org/D81001
This reverts commit 246afe0cd1. This broke
the following tests on Linux it seems:
lldb-api :: commands/expression/multiline-completion/TestMultilineCompletion.py
lldb-api :: iohandler/completion/TestIOHandlerCompletion.py
I implemented autosuggestion if there is one possible suggestion.
I set the keybinds for every character. When a character is typed, Editline::TypedCharacter is called.
Then, autosuggestion part is displayed in gray, and you can actually input by typing C-k.
Editline::Autosuggest is a function for finding completion, and it is like Editline::TabCommand now, but I will add more features to it.
Testing does not work well in my environment, so I can't confirm that it goes well, sorry. I am dealing with it now.
Reviewed By: teemperor, JDevlieghere, #lldb
Differential Revision: https://reviews.llvm.org/D81001
Summary: This way we can get rid of this 1024 char buffer workaround.
Reviewers: #lldb, labath
Reviewed By: labath
Subscribers: JDevlieghere
Differential Revision: https://reviews.llvm.org/D84528
This patch moves the `history` subcommand from the `command` to `session`
command. I think it makes more sense to have it there because as the `command`
usage suggests, it should be used to manage custom LLDB commands.
However, `history` is essentially tied to a debugging session and holds
all the commands (not specifically custom ones).
This also makes it more discoverable by adding an alias for it (mimicking
the shell builtin).
Differential Revision: https://reviews.llvm.org/D84307
Signed-off-by: Med Ismail Bennani <medismail.bennani@gmail.com>
- Remove the spurious argument to `CommandObjectScript`.
- Use make_shared instead of bare `new`.
- Move code duplication behind a macro.
Differential revision: https://reviews.llvm.org/D84336
This patch introduce a new feature that allows the users to save their
debugging session's transcript (commands + outputs) to a file.
It differs from the reproducers since it doesn't require to capture a
session preemptively and replay the reproducer file in lldb.
The user can choose the save its session manually using the session save
command or automatically by setting the interpreter.save-session-on-quit
on their init file.
To do so, the patch adds a Stream object to the CommandInterpreter that
will hold the input command from the IOHandler and the CommandReturnObject
output and error. This way, that stream object accumulates passively all
the interactions throughout the session and will save them to disk on demand.
The user can specify a file path where the session's transcript will be
saved. However, it is optional, and when it is not provided, lldb will
create a temporary file name according to the session date and time.
rdar://63347792
Differential Revision: https://reviews.llvm.org/D82155
Signed-off-by: Med Ismail Bennani <medismail.bennani@gmail.com>
Summary:
LLVM is using its own isPrint/isSpace implementation that doesn't change depending on the current locale. LLDB should do the same
to prevent that internal logic changes depending on the set locale.
Reviewers: JDevlieghere, labath, mib, totally_not_teemperor
Reviewed By: JDevlieghere
Differential Revision: https://reviews.llvm.org/D82175
Color the error: and warning: part of the CommandReturnObject output,
similar to how an error is printed from the driver when colors are
enabled.
Differential revision: https://reviews.llvm.org/D81058
This patch introduces the `(-h|--host)` option to the `platform shell`
command. It allows the user to run shell commands from the host platform
(always available) without putting lldb in the background.
Since the default behaviour of `platform shell` is to run the command of
the selected platform, having such a choice can be quite handy when
debugging remote targets, for instances.
This patch also introduces a `shell` alias, to improve the command
discoverability and make it more convenient to use for the user.
rdar://62856024
Differential Revision: https://reviews.llvm.org/D79659
Signed-off-by: Med Ismail Bennani <medismail.bennani@gmail.com>
We have the option to stop running commands in batch mode when an error
occurs. When that happens we should exit the driver with a non-zero exit
code.
Differential revision: https://reviews.llvm.org/D78825
This patch adds a new class CommandInterpreterRunResult which will be
backing the SBCommandInterpreterRunResult. It keeps track of the number
of errors as well as the result which is an enum, as proposed by Pavel
in D79120. The command interpreter now populates the results directly,
instead of its own member variables.
Differential revision: https://reviews.llvm.org/D79209
This implements Greg's suggestion from D78825 to include "auto handle
events" and "spawn thread" in CommandInterpreterRunOptions. This change
is in preparation for adding a new overload for RunCommandInterpreter
that takes only SBCommandInterpreterRunOptions and returns
SBCommandInterpreterRunResults.
Differential revision: https://reviews.llvm.org/D79108
This is how it should've been and brings it more in line with
std::string_view. There should be no functional change here.
This is mostly mechanical from a custom clang-tidy check, with a lot of
manual fixups. It uncovers a lot of minor inefficiencies.
This doesn't actually modify StringRef yet, I'll do that in a follow-up.
Summary:
A *.cpp file header in LLDB (and in LLDB) should like this:
```
//===-- TestUtilities.cpp -------------------------------------------------===//
```
However in LLDB most of our source files have arbitrary changes to this format and
these changes are spreading through LLDB as folks usually just use the existing
source files as templates for their new files (most notably the unnecessary
editor language indicator `-*- C++ -*-` is spreading and in every review
someone is pointing out that this is wrong, resulting in people pointing out that this
is done in the same way in other files).
This patch removes most of these inconsistencies including the editor language indicators,
all the different missing/additional '-' characters, files that center the file name, missing
trailing `===//` (mostly caused by clang-format breaking the line).
Reviewers: aprantl, espindola, jfb, shafik, JDevlieghere
Reviewed By: JDevlieghere
Subscribers: dexonsmith, wuzish, emaste, sdardis, nemanjai, kbarton, MaskRay, atanasyan, arphaman, jfb, abidh, jsji, JDevlieghere, usaxena95, lldb-commits
Tags: #lldb
Differential Revision: https://reviews.llvm.org/D73258
The 'asynchronously' argument to both GetLLDBCommandsFromIOHandler and
GetPythonCommandsFromIOHandler is true for all call sites. This commit
simplifies the API by dropping it and giving the baton a default
argument.
As suggested by Pavel in a code review:
> Can we replace this (and maybe python too, while at it) with a
> Host/Config.h entry? A global definition means that one has to
> recompile everything when these change in any way, whereas in
> practice only a handful of files need this..
Differential revision: https://reviews.llvm.org/D71280
Summary:
This patch removes File::SetStream() and File::SetDescriptor(),
and replaces most direct uses of File with pointers to File.
Instead of calling SetStream() on a file, we make a new file and
replace it.
My ultimate goal here is to introduce a new API class SBFile, which
has full support for python io.IOStream file objects. These can
redirect read() and write() to python code, so lldb::Files will
need a way to dispatch those methods. Additionally it will need some
form of sharing and assigning files, as a SBFile will be passed in and
assigned to the main IO streams of the debugger.
In my prototype patch queue, I make File itself copyable and add a
secondary class FileOps to manage the sharing and dispatch. In that
case SBFile was a unique_ptr<File>.
(here: https://github.com/smoofra/llvm-project/tree/files)
However in review, Pavel Labath suggested that it be shared_ptr instead.
(here: https://reviews.llvm.org/D67793)
In order for SBFile to use shared_ptr<File>, everything else should
as well.
If this patch is accepted, I will make SBFile use a shared_ptr
I will remove FileOps from future patches and use subclasses of File
instead.
Reviewers: JDevlieghere, jasonmolenda, zturner, jingham, labath
Reviewed By: labath
Subscribers: lldb-commits
Tags: #lldb
Differential Revision: https://reviews.llvm.org/D67891
llvm-svn: 373090
Summary:
This patch converts FileSystem::Open from this prototype:
Status
Open(File &File, const FileSpec &file_spec, ...);
to this one:
llvm::Expected<std::unique_ptr<File>>
Open(const FileSpec &file_spec, ...);
This is beneficial on its own, as llvm::Expected is a more modern
and recommended error type than Status. It is also a necessary step
towards https://reviews.llvm.org/D67891, and further developments
for lldb_private::File.
Reviewers: JDevlieghere, jasonmolenda, labath
Reviewed By: labath
Subscribers: mgorny, lldb-commits
Tags: #lldb
Differential Revision: https://reviews.llvm.org/D67996
llvm-svn: 373003
Summary: Usually, SIGINT and SIGSTOP don't imply a crash, e.g. SIGSTOP is sent on process launch and attach on some platforms.
Differential Revision: https://reviews.llvm.org/D67776
llvm-svn: 372961
This is the only legitimate use we currently have for modifying
a CompletionRequest. Add a utility function for this purpose
and remove the remaining setters which go against the idea of
having an immutable CompletionRequest.
llvm-svn: 372858
We currently have two lists in the CompletionRequest that we
inherited from the old API: The complete list of arguments ignoring
where the user requested completion and the list of arguments that
stops at the cursor. Having two lists of arguments is confusing
and can lead to subtle errors, so let's remove the complete list
until we actually need it.
llvm-svn: 372692
The fact that index==-1 means "no arguments" is not obvious and only
used in one place from what I can tell. Also fixes several warnings
about using the cursor index as if it was a size_t when comparing.
Not fully NFC as we now also correctly update the partial argument list
when injecting the fake empty argument in the CompletionRequest
constructor.
llvm-svn: 372566
We should in general not allow external code to fiddle with the internals of
CompletionRequest, but until this is gone let's at least provide a utility
function that makes this less dangerous.
This also now correct updates the partially parsed argument list,
but it doesn't seem to be used by anything that is behind one of
the current shift/SetCursorIndex calls, so this doesn't seeem to
fix any currently used completion.
llvm-svn: 372556
The StringRef should always be identical to the C string, so we
might as well just create the StringRef from the C-string. This
might be slightly slower until we implement the storage of ArgEntry
with a string instead of a std::unique_ptr<char[]>. Until then we
have to do the additional strlen on the C string to construct the
StringRef.
llvm-svn: 371842
The bugreport command exists to create domain-specific bug reports.
Currently it has one implementation for filing bugs on the unwinder. As
far as we can tell, it has never been of use. Although not exactly the
same as the reproducers, it's a bit confusing to have two parallel
command trees for (kind of) the same thing.
Differential revision: https://reviews.llvm.org/D65469
llvm-svn: 371132
Summary:
We still have some leftovers of the old completion API in the internals of
LLDB that haven't been replaced by the new CompletionRequest. These leftovers
are:
* The return values (int/size_t) in all completion functions.
* Our result array that starts indexing at 1.
* `WordComplete` mode.
I didn't replace them back then because it's tricky to figure out what exactly they
are used for and the completion code is relatively untested. I finally got around
to writing more tests for the API and understanding the semantics, so I think it's
a good time to get rid of them.
A few words why those things should be removed/replaced:
* The return values are really cryptic, partly redundant and rarely documented.
They are also completely ignored by Xcode, so whatever information they contain will end up
breaking Xcode's completion mechanism. They are also partly impossible to even implement
as we assign negative values special meaning and our completion API sometimes returns size_t.
Completion functions are supposed to return -2 to rewrite the current line. We seem to use this
in some untested code path to expand the history repeat character to the full command, but
I haven't figured out why that doesn't work at the moment.
Completion functions return -1 to 'insert the completion character', but that isn't implemented
(even though we seem to activate this feature in LLDB sometimes).
All positive values have to match the number of results. This is obviously just redundant information
as the user can just look at the result list to get that information (which is what Xcode does).
* The result array that starts indexing at 1 is obviously unexpected. The first element of the array is
reserved for the common prefix of all completions (e.g. "foobar" and "footar" -> "foo"). The idea is
that we calculate this to make the life of the API caller easier, but obviously forcing people to have
1-based indices is not helpful (or even worse, forces them to manually copy the results to make it
0-based like Xcode has to do).
* The `WordComplete` mode indicates that LLDB should enter a space behind the completion. The
idea is that we let the top-level API know that we just provided a full completion. Interestingly we
`WordComplete` is just a single bool that somehow represents all N completions. And we always
provide full completions in LLDB, so in theory it should always be true.
The only use it currently serves is providing redundant information about whether we have a single
definitive completion or not (which we already know from the number of results we get).
This patch essentially removes `WordComplete` mode and makes the result array indexed from 0.
It also removes all return values from all internal completion functions. The only non-redundant information
they contain is about rewriting the current line (which is broken), so that functionality was moved
to the CompletionRequest API. So you can now do `addCompletion("blub", "description", CompletionMode::RewriteLine)`
to do the same.
For the SB API we emulate the old behaviour by making the array indexed from 1 again with the common
prefix at index 0. I didn't keep the special negative return codes as we either never sent them before (e.g. -2) or we
didn't even implement them in the Editline handler (e.g. -1).
I tried to keep this patch minimal and I'm aware we can probably now even further simplify a bunch of related code,
but I would prefer doing this in follow-up NFC commits
Reviewers: JDevlieghere
Reviewed By: JDevlieghere
Subscribers: arphaman, abidh, lldb-commits
Tags: #lldb
Differential Revision: https://reviews.llvm.org/D66536
llvm-svn: 369624
This patch moves the remaining completion functions from the
old completion API (that used several variables) to just
passing a single CompletionRequest.
This is for the most part a simple change as we just replace
the old arguments with a single CompletionRequest argument.
There are a few places where I had to create new CompletionRequests
in the called functions as CompletionRequests itself are immutable
and don't expose their internal match list anymore. This means that
if a function wanted to change the CompletionRequest or directly
access the result list, we need to work around this by creating
a new CompletionRequest and a temporary match/description list.
Preparation work for rdar://53769355
llvm-svn: 369000
Replaying a reproducer in asynchronous mode never makes sense. This
patch disables asynchronous mode during replay.
Differential revision: https://reviews.llvm.org/D65547
llvm-svn: 367494
Summary:
We've had a bug where two pieces of code, executing on two threads were
attempting to write inferior output simultaneously. The first one was in
Debugger::HandleProcessEvent, which handled the cases where stdout was
coming while the process was running. The second was in
CommandInterpreter::IOHandlerInputComplete, which was ensuring that any
output is printed before the command which caused process to run
terminates.
Both of these things make sense, but the fact they were implemented as
two independent functions without any synchronization meant that race
conditions could occur (e.g. both threads call process->GetSTDOUT, get
two chunks of data, but then end up calling stream->Write in opposite
order). This was most apparent in situations where a process quickly
writes a bunch of output and then exits (as all our register tests do).
This patch adds a mutex to ensure that stdout forwarding happens
atomically. It also refactors a code somewhat in order to reduce code
duplication.
Reviewers: clayborg, jingham
Subscribers: jfb, mgorny, lldb-commits
Differential Revision: https://reviews.llvm.org/D65152
llvm-svn: 367418
Completion requests have two fields that are essentially unimplemented:
`m_match_start_point` and `m_max_return_elements`. This would've been
okay, if it wasn't for the fact that this caused a bunch of useless
parameters to be passed around. Occasionally there would be a comment or
assert saying that they are not supported. This patch removes them.
llvm-svn: 367385
When investigating a completion bug I got confused by the API.
LongestCommonPrefix finds the longest common prefix of the strings in
the string list. Instead of returning that string through an output
argument, just return it by value.
llvm-svn: 367384
Summary:
This is a bit more explicit, and makes it possible to build LLDB without
varying the -I lines per-directory.
(The latter is useful because many build systems only allow this to be
configured per-library, and LLDB is insufficiently layered to be split into
multiple libraries on stricter build systems).
(My comment on D65185 has some more context)
Reviewers: JDevlieghere, labath, chandlerc, jdoerfert
Reviewed By: labath
Subscribers: mgorny, lldb-commits
Tags: #lldb
Differential Revision: https://reviews.llvm.org/D65397
Patch by Sam McCall!
llvm-svn: 367241
Right now our Properties.inc only generates the initializer for the
options list but not the array declaration boilerplate around it. As the
array definition is identical for all arrays, we might as well also let
the Properties.inc generate it alongside the initializers.
Unfortunately we cannot do the same for enums, as there's this magic
ePropertyExperimental, which needs to come at the end to be interpreted
correctly. Hopefully we can get rid of this in the future and do the
same for the property enums.
Differential revision: https://reviews.llvm.org/D65353
llvm-svn: 367238
Property definitions are currently defined in a PropertyDefinition array
and have a corresponding enum to index in this array. Unfortunately this
is quite error prone. Indeed, just today we found an incorrect merge
where a discrepancy between the order of the enum values and their
definition caused the test suite to fail spectacularly.
Tablegen can streamline the process of generating the property
definition table while at the same time guaranteeing that the enums stay
in sync. That's exactly what this patch does. It adds a new tablegen
file for the properties, building on top of the infrastructure that
Raphael added recently for the command options. It also introduces two
new tablegen backends: one for the property definitions and one for
their corresponding enums.
It might be worth mentioning that I generated most of the tablegen
definitions from the existing property definitions, by adding a dump
method to the struct. This seems both more efficient and less error
prone that copying everything over by hand. Only Enum properties needed
manual fixup for the EnumValues and DefaultEnumValue fields.
Differential revision: https://reviews.llvm.org/D65185
llvm-svn: 367058
This patch replaces explicit calls to log::Printf with the new LLDB_LOGF
macro. The macro is similar to LLDB_LOG but supports printf-style format
strings, instead of formatv-style format strings.
So instead of writing:
if (log)
log->Printf("%s\n", str);
You'd write:
LLDB_LOG(log, "%s\n", str);
This change was done mechanically with the command below. I replaced the
spurious if-checks with vim, since I know how to do multi-line
replacements with it.
find . -type f -name '*.cpp' -exec \
sed -i '' -E 's/log->Printf\(/LLDB_LOGF\(log, /g' "{}" +
Differential revision: https://reviews.llvm.org/D65128
llvm-svn: 366936
Summary:
NFC = [[ https://llvm.org/docs/Lexicon.html#nfc | Non functional change ]]
This commit is the result of modernizing the LLDB codebase by using
`nullptr` instread of `0` or `NULL`. See
https://clang.llvm.org/extra/clang-tidy/checks/modernize-use-nullptr.html
for more information.
This is the command I ran and I to fix and format the code base:
```
run-clang-tidy.py \
-header-filter='.*' \
-checks='-*,modernize-use-nullptr' \
-fix ~/dev/llvm-project/lldb/.* \
-format \
-style LLVM \
-p ~/llvm-builds/debug-ninja-gcc
```
NOTE: There were also changes to `llvm/utils/unittest` but I did not
include them because I felt that maybe this library shall be updated in
isolation somehow.
NOTE: I know this is a rather large commit but it is a nobrainer in most
parts.
Reviewers: martong, espindola, shafik, #lldb, JDevlieghere
Reviewed By: JDevlieghere
Subscribers: arsenm, jvesely, nhaehnle, hiraditya, JDevlieghere, teemperor, rnkovacs, emaste, kubamracek, nemanjai, ki.stfu, javed.absar, arichardson, kbarton, jrtc27, MaskRay, atanasyan, dexonsmith, arphaman, jfb, jsji, jdoerfert, lldb-commits, llvm-commits
Tags: #lldb, #llvm
Differential Revision: https://reviews.llvm.org/D61847
llvm-svn: 361484
I was looking at the current implementation of SourceInitFile and there
were a few things that made this function hard to read:
* The code to find the ~/.lldbinit file is duplicated across the cwd
and non-cwd branch.
* The ./.lldbinit is once computed by resolving .lldbinit and once by
resolving ./.lldbinit.
* It wasn't clear to me what happened when you're sourcing the
.lldbinit file in the current working directory. Apparently we do
nothing when we property to control that is set to warn (makes sense)
and we don't care when the property is set to true (debatable).
* There were at least two branches where the status of the
CommandReturnObject were not set.
This patch attempts to simplify that code.
Differential revision: https://reviews.llvm.org/D61994
llvm-svn: 361080
The change that was committed for this used \\s to match spaces which does not work correctly on all platforms. Using [:space:] makes the test pass on both Linux and Windows
llvm-svn: 361064
Previously "bt all " would've failed as the regex didn't match
them.
Over the shoulder review by Jonas Devlieghere.
<rdar://problem/50824935>
llvm-svn: 360966
This patch ensures that we propagate errors coming from the lldbinit
file trough the command/script interpreter. Before, if you did something
like command script import syntax_error.py, and the python file
contained a syntax error, lldb wouldn't tell you about it. This changes
with the current patch: errors are now propagated by default.
PS: Jim authored this change and I added testing.
Differential revision: https://reviews.llvm.org/D61579
llvm-svn: 360216
Currently we have special handling for local lldbinit files in the
driver. At the same time, we have an SB API named
`SourceInitFileInCurrentWorkingDirectory` that does the same thing.
This patch removes the special handling from the driver and uses the API
instead. In addition to the obvious advantages of having one canonical
way of doing things and removing code duplication, this change also
means that the code path is the same for global and local lldb init
files.
Differential revision: https://reviews.llvm.org/D61577
llvm-svn: 360077
This patch makes `re` an alias for `register`. Currently `re<TAB>` gives
you the choice between `register` and `reproducer`. Given that you use
`register` a lot more often, it should win for the common substring.
Differential revision: https://reviews.llvm.org/D61469
llvm-svn: 359927
You can only find out about this useful customization by browsing
the settings list output or the llvm.org web pages. Mention it
in the help for thread list, thread backtrace & _regex_bt commands
to make it more discoverable.
llvm-svn: 359752
This is part two of the change started in r359330. This patch moves the
ownership of the script interpreter from the command interpreter into
the debugger. I would've preferred to remove the lazy initialization,
however the fact that the scripting language is set after the debugger
is created makes that tricky. So for now this does exactly the same
thing as when it was under the command interpreter. The result is that
this patch is fully NFC.
Differential revision: https://reviews.llvm.org/D61211
llvm-svn: 359354
The script language argument was passed from the debugger to the command
interpreter, only to call SetScriptLanguage on the debugger again. It
wasn't even used to initialize the script interpreter, because that
would query the debugger again. This patch removes the needless back and
forth.
llvm-svn: 359346
As discussed in D61090, there's no good reason for the script
interpreter to depend on the command interpreter. When looking at the
code, it becomes clear that we mostly use the command interpreter as a
way to access the debugger. Hence, it makes more sense to just pass that
to the script interpreter directly.
This is part 1 out of 2. I have another patch in the pipeline that
changes the ownership of the script interpreter to the debugger as well,
but I didn't get around to finish that today.
Differential revision: https://reviews.llvm.org/D61172
llvm-svn: 359330
For a single char argument, find_first_of is equal to find and
find_last_of is equal to rfind. While playing around with the plugin
stuff this caused an export failure because it always got inlined except
once, which resulted in an undefined symbol.
llvm-svn: 357198
This patch adds the necessary logic to capture and replay commands
entered into the command interpreter. A DataRecorder shadows the input
and writes its data to a know file. During replay this file is used as
the command interpreter's input.
It's possible to the command interpreter more than once, with a
different input source. We support this scenario by using multiple
buffers. The synchronization for this takes place at the SB layer, where
we create a new recorder every time the debugger input is changed.
During replay we use the corresponding buffer as input.
Differential revision: https://reviews.llvm.org/D58564
llvm-svn: 355249
The `ap` suffix is a remnant of lldb's former use of auto pointers,
before they got deprecated. Although all their uses were replaced by
unique pointers, some variables still carried the suffix.
In r353795 I removed another auto_ptr remnant, namely redundant calls to
::get for unique_pointers. Jim justly noted that this is a good
opportunity to clean up the variable names as well.
I went over all the changes to ensure my find-and-replace didn't have
any undesired side-effects. I hope I didn't miss any, but if you end up
at this commit doing a git blame on a weirdly named variable, please
know that the change was unintentional.
llvm-svn: 353912
Unlike std::make_unique, which is only available since C++14,
std::make_shared is available since C++11. Not only is std::make_shared
a lot more readable compared to ::reset(new), it also performs a single
heap allocation for the object and control block.
Differential revision: https://reviews.llvm.org/D57990
llvm-svn: 353764
to reflect the new license.
We understand that people may be surprised that we're moving the header
entirely to discuss the new license. We checked this carefully with the
Foundation's lawyer and we believe this is the correct approach.
Essentially, all code in the project is now made available by the LLVM
project under our new license, so you will see that the license headers
include that license only. Some of our contributors have contributed
code under our old license, and accordingly, we have retained a copy of
our old license notice in the top-level files in each project and
repository.
llvm-svn: 351636
Simplify some code in PreprocessCommand. This change improves
consistency, reduces the indentation and makes the code easier to follow
overall.
llvm-svn: 350166
Using compare is verbose, bug prone and potentially inefficient (because
of early termination). Replace relevant call sites with the (in)equality
operator.
llvm-svn: 349972
This patch simplifies boolean expressions acorss LLDB. It was generated
using clang-tidy with the following command:
run-clang-tidy.py -checks='-*,readability-simplify-boolean-expr' -format -fix $PWD
Differential revision: https://reviews.llvm.org/D55584
llvm-svn: 349215
This patch modifies how we open File instances in LLDB. Rather than
passing a path or FileSpec to the constructor, we now go through the
virtual file system. This is needed in order to make things work with
the VFS in the future.
Differential revision: https://reviews.llvm.org/D54020
llvm-svn: 346049
This patch removes the logic for resolving paths out of FileSpec and
updates call sites to rely on the FileSystem class instead.
Differential revision: https://reviews.llvm.org/D53915
llvm-svn: 345890
This patch removes the Exists method from FileSpec and updates its uses
with calls to the FileSystem.
Differential revision: https://reviews.llvm.org/D53845
llvm-svn: 345854
Raphael Isemann