Add support for recognizing a platform binary in the ObjectFileMachO
method that parses the "load binary" LC_NOTEs in a corefile.
A bit of reorganization to ProcessMachCore::DoLoadCore to separate
all of the unrelated things being done in that method into their own
separate methods, as well as small fixes to improve the handling of
a corefile with multiple kernel images in the corefile.
Differential Revision: https://reviews.llvm.org/D133680
rdar://98754861
Previously, depending on how you constructed a UUID from data or a
StringRef, an input value of all zeros was valid (e.g. setFromData)
or not (e.g. setFromOptionalData). Since there was no way to tell
which interpretation to use, it was done somewhat inconsistently.
This standardizes the meaning of a UUID of all zeros to Not Valid,
and removes all the Optional methods and their uses, as well as the
static factories that supported them.
Differential Revision: https://reviews.llvm.org/D132191
This patch teaches LLDB about Mach-O filesets. Filsets are Mach-O files
that contain a bunch of other Mach-O files. Unlike universal binaries,
which have a different header, Filesets use load commands to describe
the different entries it contains.
Differential revision: https://reviews.llvm.org/D132433
Suppress coverity false positives.
This diff contains comments only, including the hints for Coverity static code inspection
to suppress the warning originating at the next line after the comment.
Differential Revision: https://reviews.llvm.org/D131998
Static code inspection guided fixes for the following issues:
- dead code
- buffer not null-terminated
- null-dereference
- out-of-bounds access
Differential Revision: https://reviews.llvm.org/D131554
Add support to Mach-O corefiles and to live gdb remote serial protocol
connections for the corefile/remote stub to provide a list of load
addresses of binaries that should be found & loaded by lldb, and nothing
else. lldb will try to parse the binary out of memory, and if it can
find a UUID, try to find a binary & its debug information based on the
UUID, falling back to using the memory image if it must.
A bit of code unification from three parts of lldb that were loading
individual binaries already, so there is a shared method in
DynamicLoader to handle all of the variations they were doing.
Re-landing this with a uuid_is_null() implementation added to
Utility/UuidCompatibility.h for non-Darwin systems.
Differential Revision: https://reviews.llvm.org/D130813
rdar://94249937
rdar://94249384
This reverts commit d8879fba88.
Debian bot failure; I included <uuid/uuid.h> to get uuid_is_null() but
don't get it there. Will memcmp or whatever & recommit.
Add support to Mach-O corefiles and to live gdb remote serial protocol
connections for the corefile/remote stub to provide a list of load
addresses of binaries that should be found & loaded by lldb, and nothing
else. lldb will try to parse the binary out of memory, and if it can
find a UUID, try to find a binary & its debug information based on the
UUID, falling back to using the memory image if it must.
A bit of code unification from three parts of lldb that were loading
individual binaries already, so there is a shared method in
DynamicLoader to handle all of the variations they were doing.
Differential Revision: https://reviews.llvm.org/D130813
rdar://94249937
rdar://94249384
Resubmission of https://reviews.llvm.org/D130309 with the 2 patches that fixed the linux buildbot, and new windows fixes.
The FileSpec APIs allow users to modify instance variables directly by getting a non const reference to the directory and filename instance variables. This makes it impossible to control all of the times the FileSpec object is modified so we can clear cached member variables like m_resolved and with an upcoming patch caching if the file is relative or absolute. This patch modifies the APIs of FileSpec so no one can modify the directory or filename instance variables directly by adding set accessors and by removing the get accessors that are non const.
Many clients were using FileSpec::GetCString(...) which returned a unique C string from a ConstString'ified version of the result of GetPath() which returned a std::string. This caused many locations to use this convenient function incorrectly and could cause many strings to be added to the constant string pool that didn't need to. Most clients were converted to using FileSpec::GetPath().c_str() when possible. Other clients were modified to use the newly renamed version of this function which returns an actualy ConstString:
ConstString FileSpec::GetPathAsConstString(bool denormalize = true) const;
This avoids the issue where people were getting an already uniqued "const char *" that came from a ConstString only to put the "const char *" back into a "ConstString" object. By returning the ConstString instead of a "const char *" clients can be more efficient with the result.
The patch:
- Removes the non const GetDirectory() and GetFilename() get accessors
- Adds set accessors to replace the above functions: SetDirectory() and SetFilename().
- Adds ClearDirectory() and ClearFilename() to replace usage of the FileSpec::GetDirectory().Clear()/FileSpec::GetFilename().Clear() call sites
- Fixed all incorrect usage of FileSpec::GetCString() to use FileSpec::GetPath().c_str() where appropriate, and updated other call sites that wanted a ConstString to use the newly returned ConstString appropriately and efficiently.
Differential Revision: https://reviews.llvm.org/D130549
The FileSpect APIs allow users to modify instance variables directly by getting a non const reference to the directory and filename instance variables. This makes it impossibly to control all of the times the FileSpec object is modified so we can clear the cache. This patch modifies the APIs of FileSpec so no one can modify the directory or filename directly by adding set accessors and by removing the get accessors that are non const.
Many clients were using FileSpec::GetCString(...) which returned a unique C string from a ConstString'ified version of the result of GetPath() which returned a std::string. This caused many locations to use this convenient function incorrectly and could cause many strings to be added to the constant string pool that didn't need to. Most clients were converted to using FileSpec::GetPath().c_str() when possible. Other clients were modified to use the newly renamed version of this function which returns an actualy ConstString:
ConstString FileSpec::GetPathAsConstString(bool denormalize = true) const;
This avoids the issue where people were getting an already uniqued "const char *" that came from a ConstString only to put the "const char *" back into a "ConstString" object. By returning the ConstString instead of a "const char *" clients can be more efficient with the result.
The patch:
- Removes the non const GetDirectory() and GetFilename() get accessors
- Adds set accessors to replace the above functions: SetDirectory() and SetFilename().
- Adds ClearDirectory() and ClearFilename() to replace usage of the FileSpec::GetDirectory().Clear()/FileSpec::GetFilename().Clear() call sites
- Fixed all incorrect usage of FileSpec::GetCString() to use FileSpec::GetPath().c_str() where appropriate, and updated other call sites that wanted a ConstString to use the newly returned ConstString appropriately and efficiently.
Differential Revision: https://reviews.llvm.org/D130309
As it exists today, Host::SystemLog is used exclusively for error
reporting. With the introduction of diagnostic events, we have a better
way of reporting those. Instead of printing directly to stderr, these
messages now get printed to the debugger's error stream (when using the
default event handler). Alternatively, if someone is listening for these
events, they can decide how to display them, for example in the context
of an IDE such as Xcode.
This change also means we no longer write these messages to the system
log on Darwin. As far as I know, nobody is relying on this, but I think
this is something we could add to the diagnostic event mechanism.
Differential revision: https://reviews.llvm.org/D128480
The current design allows that the object file contents could be mapped
by one object file plugin and then used by another. Presumably the idea
here was to avoid mapping the same file twice.
This becomes an issue when one object file plugin wants to map the file
differently from the others. For example, ObjectFileELF needs to map its
memory as writable while others likeObjectFileMachO needs it to be
mapped read-only.
This patch prevents plugins from changing the buffer by passing them is
by value rather than by reference.
Differential revision: https://reviews.llvm.org/D122944
The current code increment the indirect symbol offset with the LINKEDIT
slide every time ObjectFileMachO::ParseSymtab is called.
This resulted in a crash when calling add-dsym which causes us to
potentially re-parse the original binary's symbol table. There's a
separate question about whether we should re-parse the symbol table at
all which was fixed by D114288. Regardless, copying the load command is
cheap enough that this is still the right thing to do.
rdar://72337717
Differential revision: https://reviews.llvm.org/D122349
Fix the log and progress report message for in-memory binaries. If
there's no object file, use the name from the Module. With this patch we
correctly show the library name when attaching to a remote process
without an expanded shared cache.
Differential revision: https://reviews.llvm.org/D122177
ObjectFileMachO, for a couple of special binaries at the initial
launch, needs to find segment load addresses before the Target's
SectionLoadList has been initialized. The calculation to find
the first segment, which is at the same address as the mach header,
was not correct if the binary was in the Darwin shared cache.
Update the logic to handle that case.
Differential Revision: https://reviews.llvm.org/D119602
rdar://88802629
Most of our code was including Log.h even though that is not where the
"lldb" log channel is defined (Log.h defines the generic logging
infrastructure). This worked because Log.h included Logging.h, even
though it should.
After the recent refactor, it became impossible the two files include
each other in this direction (the opposite inclusion is needed), so this
patch removes the workaround that was put in place and cleans up all
files to include the right thing. It also renames the file to LLDBLog to
better reflect its purpose.
This is a re-submission of 24d2405588
without the hunks in HostNativeThreadBase.{h,cpp}, which break builds
on Windows.
Identified with modernize-use-nullptr.
This reverts commit 913457acf0.
It again broke builds on Windows:
lldb/source/Host/common/HostNativeThreadBase.cpp(37,14): error:
assigning to 'lldb::thread_result_t' (aka 'unsigned int') from
incompatible type 'std::nullptr_t'
This is a re-submission of 24d2405588
without the hunk in HostNativeThreadBase.h, which breaks builds on
Windows.
Identified with modernize-use-nullptr.
This reverts commit 24d2405588.
Breaks building on Windows:
../../lldb/include\lldb/Host/HostNativeThreadBase.h(49,36): error:
cannot initialize a member subobject of type 'lldb::thread_result_t'
(aka 'unsigned int') with an rvalue of type 'std::nullptr_t'
lldb::thread_result_t m_result = nullptr;
^~~~~~~
1 error generated.
Version 2 of 'main bin spec' LC_NOTE allows for the specification
of a slide of where the binary is loaded in the corefile virtual
address space. It also adds a (currently unused) platform field
for the main binary.
Some corefile creators will only have a UUID and an offset to be
applied to the binary.
Changed TestFirmwareCorefiles.py to test this new form of
'main bin spec' with a slide, and also to run on both x86_64
and arm64 macOS systems.
Differential Revision: https://reviews.llvm.org/D116094
rdar://85938455
Add lldb support for a Mach-O "load binary" LC_NOTE which provides
a UUID, load address/slide, and possibly a name of a binary that
should be loaded when examining the core.
struct load_binary
{
uint32_t version; // currently 1
uuid_t uuid; // all zeroes if uuid not specified
uint64_t load_address; // virtual address where the macho is loaded, UINT64_MAX if unavail
uint64_t slide; // slide to be applied to file address to get load address, 0 if unavail
char name_cstring[]; // must be nul-byte terminated c-string, '\0' alone if name unavail
} __attribute__((packed));
Differential Revision: https://reviews.llvm.org/D115494
rdar://85069250
With arm64e ARMv8.3 pointer authentication, lldb needs to know how
many bits are used for addressing and how many are used for pointer
auth signing. This should be determined dynamically from the inferior
system / corefile, but there are some workflows where it still isn't
recorded and we fall back on a default value that is correct on some
Darwin environments.
This patch also explicitly sets the vendor of mach-o binaries to
Apple, so we select an Apple ABI instead of a random other ABI.
It adds a function pointer formatter for systems where pointer
authentication is in use, and we can strip the ptrauth bits off
of the function pointer address and get a different value that
points to an actual symbol.
Differential Revision: https://reviews.llvm.org/D115431
rdar://84644661
Symbol table parsing has evolved over the years and many plug-ins contained duplicate code in the ObjectFile::GetSymtab() that used to be pure virtual. With this change, the "Symbtab *ObjectFile::GetSymtab()" is no longer virtual and will end up calling a new "void ObjectFile::ParseSymtab(Symtab &symtab)" pure virtual function to actually do the parsing. This helps centralize the code for parsing the symbol table and allows the ObjectFile base class to do all of the common work, like taking the necessary locks and creating the symbol table object itself. Plug-ins now just need to parse when they are asked to parse as the ParseSymtab function will only get called once.
This is a retry of the original patch https://reviews.llvm.org/D113965 which was reverted. There was a deadlock in the Manual DWARF indexing code during symbol preloading where the module was asked on the main thread to preload its symbols, and this would in turn cause the DWARF manual indexing to use a thread pool to index all of the compile units, and if there were relocations on the debug information sections, these threads could ask the ObjectFile to load section contents, which could cause a call to ObjectFileELF::RelocateSection() which would ask for the symbol table from the module and it would deadlock. We can't lock the module in ObjectFile::GetSymtab(), so the solution I am using is to use a llvm::once_flag to create the symbol table object once and then lock the Symtab object. Since all APIs on the symbol table use this lock, this will prevent anyone from using the symbol table before it is parsed and finalized and will avoid the deadlock I mentioned. ObjectFileELF::GetSymtab() was never locking the module lock before and would put off creating the symbol table until somewhere inside ObjectFileELF::GetSymtab(). Now we create it one time inside of the ObjectFile::GetSymtab() and immediately lock it which should be safe enough. This avoids the deadlocks and still provides safety.
Differential Revision: https://reviews.llvm.org/D114288
This reverts commit 951b107eed.
Buildbots were failing, there is a deadlock in /Users/gclayton/Documents/src/llvm/clean/llvm-project/lldb/test/Shell/SymbolFile/DWARF/DW_AT_range-DW_FORM_sec_offset.s when ELF files try to relocate things.
Symbol table parsing has evolved over the years and many plug-ins contained duplicate code in the ObjectFile::GetSymtab() that used to be pure virtual. With this change, the "Symbtab *ObjectFile::GetSymtab()" is no longer virtual and will end up calling a new "void ObjectFile::ParseSymtab(Symtab &symtab)" pure virtual function to actually do the parsing. This helps centralize the code for parsing the symbol table and allows the ObjectFile base class to do all of the common work, like taking the necessary locks and creating the symbol table object itself. Plug-ins now just need to parse when they are asked to parse as the ParseSymtab function will only get called once.
Differential Revision: https://reviews.llvm.org/D113965
The new module stats adds the ability to measure the time it takes to parse and index the symbol tables for each module, and reports modules statistics in the output of "statistics dump" along with the path, UUID and triple of the module. The time it takes to parse and index the symbol tables are also aggregated into new top level key/value pairs at the target level.
Differential Revision: https://reviews.llvm.org/D112279
This patch deals with ObjectFile, ObjectContainer and OperatingSystem
plugins. I'll convert the other types in separate patches.
In order to enable piecemeal conversion, I am leaving some ConstStrings
in the lowest PluginManager layers. I'll convert those as the last step.
Differential Revision: https://reviews.llvm.org/D112061
There is no reason why this function should be returning a ConstString.
While modifying these files, I also fixed several instances where
GetPluginName and GetPluginNameStatic were returning different strings.
I am not changing the return type of GetPluginNameStatic in this patch, as that
would necessitate additional changes, and this patch is big enough as it is.
Differential Revision: https://reviews.llvm.org/D111877
This reverts commits f9aba9a5af and
035217ff51.
As explained in the original commit message, this didn't have the
intended effect of improving the common LLDB use case, but still
provided a marginal improvement for the places where LLDB creates a
scoped time with a string literal.
The reason for the revert is that this change pulls in the os/signpost.h
header in Signposts.h. The former transitively includes loader.h, which
contains a series of macro defines that conflict with MachO.h. There are
ways to work around that, but Adrian and I concluded that none of them
are worth the trade-off in complicating Signposts.h even further.
Jason Molenda