Split the read thread support from Communication into a dedicated
ThreadedCommunication subclass. The read thread support is used only
by a subset of Communication consumers, and it adds a lot of complexity
to the base class. Furthermore, having a dedicated subclass makes it
clear whether a particular consumer needs to account for the possibility
of read thread being running or not.
The modules currently calling `StartReadThread()` are updated to use
`ThreadedCommunication`. The remaining modules use the simplified
`Communication` class.
`SBCommunication` is changed to use `ThreadedCommunication` in order
to avoid changing the public API.
`CommunicationKDP` is updated in order to (hopefully) compile with
the new code. However, I do not have a Darwin box to test it, so I've
limited the changes to the bare minimum.
`GDBRemoteCommunication` is updated to become a `Broadcaster` directly.
Since it does not inherit from `ThreadedCommunication`, its event
support no longer collides with the one used for read thread and can
be implemented cleanly. The support for
`eBroadcastBitReadThreadDidExit` is removed from the code -- since
the read thread was not used, this event was never reported.
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.llvm.org/D133251
Fix modernize-use-override warnings. Because this check is listed in
LLDB's top level .clang-tidy configuration, the check is enabled by
default and the resulting warnings show up in my editor.
I've audited the modified lines. This is not a blind change.
Add a nul byte to the stream in CommunicationKDP::CheckForPacket
before we send the GetData() to a Log::Printf as a c-str. Avoids
a crash when logging kdp communications and memory layout isn't
in your favor.
LLDB has a few different styles of header guards and they're not very
consistent because things get moved around or copy/pasted. This patch
unifies the header guards across LLDB and converts everything to match
LLVM's style.
Differential revision: https://reviews.llvm.org/D74743
A lot of comments in LLDB are surrounded by an ASCII line to delimit the
begging and end of the comment.
Its use is not really consistent across the code base, sometimes the
lines are longer, sometimes they are shorter and sometimes they are
omitted. Furthermore, it looks kind of weird with the 80 column limit,
where the comment actually extends past the line, but not by much.
Furthermore, when /// is used for Doxygen comments, it looks
particularly odd. And when // is used, it incorrectly gives the
impression that it's actually a Doxygen comment.
I assume these lines were added to improve distinguishing between
comments and code. However, given that todays editors and IDEs do a
great job at highlighting comments, I think it's worth to drop this for
the sake of consistency. The alternative is fixing all the
inconsistencies, which would create a lot more churn.
Differential revision: https://reviews.llvm.org/D60508
llvm-svn: 358135
to reflect the new license.
We understand that people may be surprised that we're moving the header
entirely to discuss the new license. We checked this carefully with the
Foundation's lawyer and we believe this is the correct approach.
Essentially, all code in the project is now made available by the LLVM
project under our new license, so you will see that the license headers
include that license only. Some of our contributors have contributed
code under our old license, and accordingly, we have retained a copy of
our old license notice in the top-level files in each project and
repository.
llvm-svn: 351636
Summary:
These are general purpose "utility" classes, whose functionality is not
debugger-specific in any way. As such, I believe they belong in the
Utility module.
This doesn't break any particular dependency (yet), but it reduces the
number of Core dependencies across the board.
Reviewers: zturner, jingham, teemperor, clayborg
Subscribers: mgorny, lldb-commits
Differential Revision: https://reviews.llvm.org/D55361
llvm-svn: 349157
This patch removes the comments grouping header includes. They were
added after running IWYU over the LLDB codebase. However they add little
value, are often outdates and burdensome to maintain.
llvm-svn: 346626
Summary:
This class was initially in Host because its implementation used to be
very OS-specific. However, with C++11, it has become a very simple
std::condition_variable wrapper, with no host-specific code.
It is also a general purpose utility class, so it makes sense for it to
live in a place where it can be used by everyone.
This has no effect on the layering right now, but it enables me to later
move the Listener+Broadcaster+Event combo to a lower layer, which is
important, as these are used in a lot of places (notably for launching a
process in Host code).
Reviewers: jingham, zturner, teemperor
Reviewed By: zturner
Subscribers: xiaobai, mgorny, lldb-commits
Differential Revision: https://reviews.llvm.org/D50384
llvm-svn: 341089
This renames the LLDB error class to Status, as discussed
on the lldb-dev mailing list.
A change of this magnitude cannot easily be done without
find and replace, but that has potential to catch unwanted
occurrences of common strings such as "Error". Every effort
was made to find all the obvious things such as the word "Error"
appearing in a string, etc, but it's possible there are still
some lingering occurences left around. Hopefully nothing too
serious.
llvm-svn: 302872
*** to conform to clang-format’s LLVM style. This kind of mass change has
*** two obvious implications:
Firstly, merging this particular commit into a downstream fork may be a huge
effort. Alternatively, it may be worth merging all changes up to this commit,
performing the same reformatting operation locally, and then discarding the
merge for this particular commit. The commands used to accomplish this
reformatting were as follows (with current working directory as the root of
the repository):
find . \( -iname "*.c" -or -iname "*.cpp" -or -iname "*.h" -or -iname "*.mm" \) -exec clang-format -i {} +
find . -iname "*.py" -exec autopep8 --in-place --aggressive --aggressive {} + ;
The version of clang-format used was 3.9.0, and autopep8 was 1.2.4.
Secondly, “blame” style tools will generally point to this commit instead of
a meaningful prior commit. There are alternatives available that will attempt
to look through this change and find the appropriate prior commit. YMMV.
llvm-svn: 280751
This finally removes the use of the Mutex and Condition classes. This is an
intricate patch as the Mutex and Condition classes were tied together.
Furthermore, many places had slightly differing uses of time values. Convert
timeout values to relative everywhere to permit the use of
std::chrono::duration, which is required for the use of
std::condition_variable's timeout. Adjust all Condition and related Mutex
classes over to std::{,recursive_}mutex and std::condition_variable.
This change primarily comes at the cost of breaking the TracingMutex which was
based around the Mutex class. It would be possible to write a wrapper to
provide similar functionality, but that is beyond the scope of this change.
llvm-svn: 277011
This helps ensure that the launched debugserver is ready and listening for a connection. Prior to this we had a race condition.
Consolidate the launching of debugserver into a single place: a static function in GDBRemoteCommunication.
llvm-svn: 196401
Added commands to the KDP plug-in that allow sending raw commands through the KDP protocol. You specify a command byte and a payload as ASCII hex bytes, and the packet is created with a valid header/sequenceID/length and sent. The command responds with a raw ASCII hex string that contains all bytes in the reply including the header.
An example of sending a read register packet for the GPR on x86_64:
(lldb) process plugin packet send --command 0x07 --payload 0100000004000000
llvm-svn: 166346
loaded at a random offset).
To get the kernel's UUID and load address I need to send a kdp
packet so I had to implement the kernel relocation (and attempt to
find the kernel if none was provided to lldb already) in ProcessKDP
-- but this code really properly belongs in DynamicLoaderDarwinKernel.
I also had to add an optional Stream to ConnectRemote so
ProcessKDP::DoConnectRemote can print feedback about the remote kernel's
UUID, load address, and notify the user if we auto-loaded the kernel via
the UUID.
<rdar://problem/7714201>
llvm-svn: 164881
KDP -- now with rudimentary process control (continue only) and read + write registers (which means we can see stack frames) for x86_64, i386 and ARM.
llvm-svn: 164352
Cleaned up the Mutex::Locker and the ReadWriteLock classes a bit.
Also cleaned up the GDBRemoteCommunication class to not have so many packet functions. Used the "NoLock" versions of send/receive packet functions when possible for a bit of performance.
llvm-svn: 154458
The current ProcessGDBRemote function that updates the threads could end up with an empty list if any other thread had the sequence mutex. We now don't clear the thread list when we can't access it, and we also have changed how lldb_private::Process handles the return code from the:
virtual bool
Process::UpdateThreadList (lldb_private::ThreadList &old_thread_list,
lldb_private::ThreadList &new_thread_list) = 0;
A bool is now returned to indicate if the list was actually updated or not and the lldb_private::Process class will only update the stop ID of the validity of the thread list if "true" is returned.
The ProcessGDBRemote also got an extra assertion that will hopefully assert when running debug builds so we can find the source of this issue.
llvm-svn: 154365
- reorganizing the PTS (Partial Template Specializations) in FormatManager.h
- applied a patch by Filipe Cabecinhas to make LLDB compile with GCC
Functional changes:
- fixed an issue where command type summary add for type "struct Foo" would not match any types.
currently, "struct" will be stripped off and type "Foo" will be matched.
similar behavior occurs for class, enum and union specifiers.
llvm-svn: 138020
an executable file if it is right next to a dSYM file that is found using
DebugSymbols. The code also looks into a bundle if the dSYM file is right
next to a bundle.
Modified the MacOSX kernel dynamic loader plug-in to correctly set the load
address for kext sections. This is a tad tricky because of how LLDB chooses
to treat mach-o segments with no name. Also modified the loader to properly
handle the older version 1 kext summary info.
Fixed a crasher in the Mach-o object file parser when it is trying to set
the section size correctly for dSYM sections.
Added packet dumpers to the CommunicationKDP class. We now also properly
detect address byte sizes based on the cpu type and subtype that is provided.
Added a read memory and read register support to CommunicationKDP. Added a
ThreadKDP class that now uses subclasses of the RegisterContextDarwin_XXX for
arm, i386 and x86_64.
Fixed some register numbering issues in the RegisterContextDarwin_arm class
and added ARM GDB numbers to the ARM_GCC_Registers.h file.
Change the RegisterContextMach_XXX classes over to subclassing their
RegisterContextDarwin_XXX counterparts so we can share the mach register
contexts between the user and kernel plug-ins.
llvm-svn: 135466
method so process plug-ins that are requested by name can answer yes when
asked if they can debug a target that might not have any file in the target.
Modified the ConnectionFileDescriptor to have both a read and a write file
descriptor. This allows us to support UDP, and eventually will allow us to
support pipes. The ConnectionFileDescriptor class also has a file descriptor
type for each of the read and write file decriptors so we can use the correct
read/recv/recvfrom call when reading, or write/send/sendto for writing.
Finished up an initial implementation of UDP where you can use the "udp://"
URL to specify a host and port to connect to:
(lldb) process connect --plugin kdp-remote udp://host:41139
This will cause a ConnectionFileDescriptor to be created that can send UDP
packets to "host:41139", and it will also bind to a localhost port that can
be given out to receive the connectionless UDP reply.
Added the ability to get to the IPv4/IPv6 socket port number from a
ConnectionFileDescriptor instance if either file descriptor is a socket.
The ProcessKDP can now successfully connect to a remote kernel and detach
using the above "processs connect" command!!! So far we have the following
packets working:
KDP_CONNECT
KDP_DISCONNECT
KDP_HOSTINFO
KDP_VERSION
KDP_REATTACH
Now that the packets are working, adding new packets will go very quickly.
llvm-svn: 135363
Implemented connect, disconnect, reattach, version, and hostinfo.
Modified the ConnectionFileDescriptor class to be able to handle UDP.
Added a new Stream subclass called StreamBuffer that is backed by a
llvm::SmallVector for better efficiency.
Modified the DataExtractor class to have a static function that can
dump hex bytes into a stream. This is currently being used to dump incoming
binary packet data in the KDP plug-in.
llvm-svn: 135338
same as the old "connect://<host>:<port>". Also added the ability to
connect using "udp://<host>:<port>" which will open a connected
datagram socket. I need to find a way to specify a non connected
datagram socket as well.
We might need to start setting some settings in the URL itself,
maybe something like:
udp://<host>:<port>?connected=yes
udp://<host>:<port>?connected=no
I am open to suggestions for URL settings.
Also did more work on the KDP darwin kernel plug-in.
llvm-svn: 135277
Dave Lee