Modify OpenOptions enum to open the future path into synchronizing
vFile:open bits with GDB. Currently, LLDB and GDB use different flag
models effectively making it impossible to match bits. Notably, LLDB
uses two bits to indicate read and write status, and uses union of both
for read/write. GDB uses a value of 0 for read-only, 1 for write-only
and 2 for read/write.
In order to future-proof the code for the GDB variant:
1. Add a distinct eOpenOptionReadWrite constant to be used instead
of (eOpenOptionRead | eOpenOptionWrite) when R/W access is required.
2. Rename eOpenOptionRead and eOpenOptionWrite to eOpenOptionReadOnly
and eOpenOptionWriteOnly respectively, to make it clear that they
do not mean to be combined and require update to all call sites.
3. Use the intersection of all three flags when matching against
the three possible values.
This commit does not change the actual bits used by LLDB.
Differential Revision: https://reviews.llvm.org/D106984
This adds memory tag writing to Process and the
GDB remote code. Supporting work for the
"memory tag write" command. (to follow)
Process WriteMemoryTags is similair to ReadMemoryTags.
It will pack the tags then call DoWriteMemoryTags.
That function will send the QMemTags packet to the gdb-remote.
The QMemTags packet follows the GDB specification in:
https://sourceware.org/gdb/current/onlinedocs/gdb/General-Query-Packets.html#General-Query-Packets
Note that lldb-server will be treating partial writes as
complete failures. So lldb doesn't need to handle the partial
write case in any special way.
Reviewed By: omjavaid
Differential Revision: https://reviews.llvm.org/D105181
This reverts commit 82a3883715.
The original version had a copy-paste error: using the Interrupt timeout
for the ResumeSynchronous wait, which is clearly wrong. This error would
have been evident with real use, but the interrupt is long enough that it
only caused one testsuite failure (in the Swift fork).
Anyway, I found that mistake and fixed it and checked all the other places
where I had to plumb through a timeout, and added a test with a short
interrupt timeout stepping over a function that takes 3x the interrupt timeout
to complete, so that should detect a similar mistake in the future.
This adds GDB client support for the qMemTags packet
which reads memory tags. Following the design
which was recently committed to GDB.
https://sourceware.org/gdb/current/onlinedocs/gdb/General-Query-Packets.html#General-Query-Packets
(look for qMemTags)
lldb commands will use the new Process methods
GetMemoryTagManager and ReadMemoryTags.
The former takes a range and checks that:
* The current process architecture has an architecture plugin
* That plugin provides a MemoryTagManager
* That the range of memory requested lies in a tagged range
(it will expand it to granules for you)
If all that was true you get a MemoryTagManager you
can give to ReadMemoryTags.
This two step process is done to allow commands to get the
tag manager without having to read tags as well. For example
you might just want to remove a logical tag, or error early
if a range with tagged addresses is inverted.
Note that getting a MemoryTagManager doesn't mean that the process
or a specific memory range is tagged. Those are seperate checks.
Having a tag manager just means this architecture *could* have
a tagging feature enabled.
An architecture plugin has been added for AArch64 which
will return a MemoryTagManagerAArch64MTE, which was added in a
previous patch.
Reviewed By: omjavaid
Differential Revision: https://reviews.llvm.org/D95602
This feature "memory-tagging+" indicates that lldb-server
supports memory tagging packets. (added in a later patch)
We check HWCAP2_MTE to decide whether to enable this
feature for Linux.
Reviewed By: omjavaid
Differential Revision: https://reviews.llvm.org/D97282
Since https://reviews.llvm.org/D103701 AppendError<...>
sets this for you.
This change includes all of the non-command uses.
Some uses remain where it's either tricky to reason about
the logic, or they aren't paired with AppendError calls.
Reviewed By: teemperor
Differential Revision: https://reviews.llvm.org/D104379
This is an NFC cleanup.
Many of the API's that returned BreakpointOptions always returned valid ones.
Internally the BreakpointLocations usually have null BreakpointOptions, since they
use their owner's options until an option is set specifically on the location.
So the original code used pointers & unique_ptr everywhere for consistency.
But that made the code hard to reason about from the outside.
This patch changes the code so that everywhere an API is guaranteed to
return a non-null BreakpointOption, it returns it as a reference to make
that clear.
It also changes the Breakpoint to hold a BreakpointOption
member where it previously had a UP. Since we were always filling the UP
in the Breakpoint constructor, having the UP wasn't helping anything.
Differential Revision: https://reviews.llvm.org/D104162
The C headers are deprecated so as requested in D102845, this is replacing them
all with their (not deprecated) C++ equivalent.
Reviewed By: shafik
Differential Revision: https://reviews.llvm.org/D103084
This reverts commit bd5751f3d2.
This patch series is causing us to every so often miss switching
the state from eStateRunning to eStateStopped when we get the stop
packet from the debug server.
Reverting till I can figure out how that could be happening.
ProcessGDBRemote plugin layers.
Also fix a bug where if we tried to interrupt, but the ReadPacket
wakeup timer woke us up just after the timeout, we would break out
the switch, but then since we immediately check if the response is
empty & fail if it is, we could end up actually only giving a
small interval to the interrupt.
Differential Revision: https://reviews.llvm.org/D102085
This looks like just an oversight in the AsyncThread function. It gets a result of
eStateInvalid, and then marks the process as exited, but doesn't set "done" to true,
so we go to fetch another event. That is not safe, since you don't know when that
extra packet is going to arrive. If it arrives while you are tearing down the
process, the internal-state-thread might try to handle it when the process in not
in a good state.
Rather than put more effort into checking all the shutdown paths to make sure this
extra packet doesn't cause problems, just don't fetch it. We weren't going to do
anything useful with it anyway.
The main part of the patch is setting "done = true" when we get the eStateInvalid.
I also added a check at the beginning of the while(done) loop to prevent another error
from getting us to fetch packets for an exited process.
I added a test case to ensure that if an Interrupt fails, we call the process
exited. I can't test exactly the error I'm fixing, there's no good way to know
that the stop reply for the failed interrupt wasn't fetched. But at least this
asserts that the overall behavior is correct.
Differential Revision: https://reviews.llvm.org/D101933
Read the number of addressable bits from the qHostInfo packet and use it
to set the code and data address mask in the process. The data
(addressing_bits) is already present in the packet.
Differential revision: https://reviews.llvm.org/D100520
Add a minimal support for the multiprocess extension in gdb-remote
client. It accepts PIDs as part of thread-ids, and rejects PIDs that
do not match the current inferior.
Differential Revision: https://reviews.llvm.org/D99603
This implements the interactive trace start and stop methods.
This diff ended up being much larger than I anticipated because, by doing it, I found that I had implemented in the beginning many things in a non optimal way. In any case, the code is much better now.
There's a lot of boilerplate code due to the gdb-remote protocol, but the main changes are:
- New tracing packets: jLLDBTraceStop, jLLDBTraceStart, jLLDBTraceGetBinaryData. The gdb-remote packet definitions are quite comprehensive.
- Implementation of the "process trace start|stop" and "thread trace start|stop" commands.
- Implementaiton of an API in Trace.h to interact with live traces.
- Created an IntelPTDecoder for live threads, that use the debugger's stop id as checkpoint for its internal cache.
- Added a functionality to stop the process in case "process tracing" is enabled and a new thread can't traced.
- Added tests
I have some ideas to unify the code paths for post mortem and live threads, but I'll do that in another diff.
Differential Revision: https://reviews.llvm.org/D91679
We have a plugin.process.gdb-remote.packet-timeout setting, which can be
used to control how long the lldb client is willing to wait before
declaring the server side dead. Our test suite makes use of this
feature, and sets the setting value fairly high, as the low default
value can cause flaky tests, particularly on slower bots.
After fixing TestPlatformConnect (one of the few tests exercising the
remote platform capabilities of lldb) in 4b284b9ca, it immediately
started being flaky on the arm bots. It turns out this is because the
packet-timeout setting is not being applied to platform connections.
This patch makes the platform connections also respect the value of this
setting. It also adds a test which checks that the timeout value is
being honored.
Differential Revision: https://reviews.llvm.org/D97769
Native register descriptions in LLDB specify lldb register numbers in
value_regs and invalidate_regs lists. These register numbers may not
match with Process gdb-remote register numbers which are generated by
native process after counting all registers in its register sets.
It was coincidentally not causing any problems as we never came across
a native target with dynamically changing register sets and register
numbers generated by counter matched with LLDB native register numbers.
This came up while testing target AArch64 SVE which can choose register
sets based on underlying hardware.
This patch fixes this behavior and always tries to use remote register
numbers while reading/writing registers over gdb-remote protocol.
Reviewed By: labath
Differential Revision: https://reviews.llvm.org/D77043
This patch builds on previously submitted SVE patches regarding expedited
register set and per thread register infos. (D82853 D82855 and D82857)
We need to resize SVE register based on value received in expedited list.
Also we need to resize SVE registers when we write vg register using
register write vg command. The resize will result in a updated offset
for all of fpr and sve register set. This offset will be configured
in native register context by RegisterInfoInterface and will also be
be updated on client side in GDBRemoteRegisterContext.
A follow up patch will provide a API test to verify this change.
Reviewed By: labath
Differential Revision: https://reviews.llvm.org/D82863
In gdb-remote process we have register infos defind as a refernce object of
GDBRemoteDynamicRegisterInfo class. In past register infos have remained
constant througout the life time of a process.
This has changed after AArch64 SVE support where register infos will have
per-thread configuration. SVE registers will have per-thread size and can
be updated while running. This patch aims to build up for that support by
changing GDBRemoteDynamicRegisterInfo reference to a shared pointer deinfed
per-thread.
Reviewed By: labath
Differential Revision: https://reviews.llvm.org/D82857
This patch carries forward our aim to remove offset field from qRegisterInfo
packets and XML register description. I have created a new function which
returns if offset fields are dynamic meaning client can calculate offset on
its own based on register number sequence and register size. For now this
function only returns true for NativeRegisterContextLinux_arm64 but we can
test this for other architectures and make it standard later.
As a consequence we do not send offset field from lldb-server (arm64 for now)
while other stubs dont have an offset field so it wont effect them for now.
On the client side we have replaced previous offset calculation algorithm
with a new scheme, where we sort all primary registers in increasing
order of remote regnum and then calculate offset incrementally.
This committ also includes a test to verify all of above functionality
on Arm64.
Reviewed By: labath
Differential Revision: https://reviews.llvm.org/D91241
Add a 'can_connect' parameter to Process plugin initialization, and use
it to filter plugins to these capable of remote connections. This is
used to prevent 'process connect' from picking up a plugin that can only
be used locally, e.g. the legacy FreeBSD plugin.
Differential Revision: https://reviews.llvm.org/D91810
Depends on D89283.
The goal of this packet (jTraceGetSupportedType) is to be able to query the gdb-server for the tracing technology that can work for the current debuggeer, which can make the user experience simpler but allowing the user to simply type
thread trace start
to start tracing the current thread without even telling the debugger to use "intel-pt", for example. Similarly, `thread trace start [args...]` would accept args beloging to the working trace type.
Also, if the user typed
help thread trace start
We could directly show the help information of the trace type that is supported for the target, or mention instead that no tracing is supported, if that's the case.
I added some simple tests, besides, when I ran this on my machine with intel-pt support, I got
$ process plugin packet send "jTraceSupportedType"
packet: jTraceSupportedType
response: {"description":"Intel Processor Trace","pluginName":"intel-pt"}
On a machine without intel-pt support, I got
$ process plugin packet send "jTraceSupportedType"
packet: jTraceSupportedType
response: E00;
Reviewed By: clayborg, labath
Differential Revision: https://reviews.llvm.org/D90490
This patch redesigns the Target::GetUtilityFunctionForLanguage API:
- Use a unique_ptr instead of a raw pointer for the return type.
- Wrap the result in an llvm::Expected instead of using a Status object as an I/O parameter.
- Combine the action of "getting" and "installing" the UtilityFunction as they always get called together.
- Pass std::strings instead of const char* and std::move them where appropriate.
There's more room for improvement but I think this tackles the most
prevalent issues with the current API.
Differential revision: https://reviews.llvm.org/D90011
ptsname is not thread-safe. ptsname_r is available on most (but not all)
systems -- use it preferentially.
In the patch I also improve the thread-safety of the ptsname fallback
path by wrapping it in a mutex. This should guarantee the safety of a
typical ptsname implementation using a single static buffer, as long as
all callers go through this function.
I also remove the error arguments, as the only way this function can
fail is if the "primary" fd is not valid. This is a programmer error as
this requirement is documented, and all callers ensure that is the case.
Differential Revision: https://reviews.llvm.org/D88728
Most process plugins (if not all) don't set hardware index for breakpoints. They even
are not able to determine this index.
This patch makes StoppointLocation::IsHardware pure virtual and lets BreakpointSite
override it using more accurate BreakpointSite::Type.
It also adds assertions to be sure that a breakpoint site is hardware when this is required.
Differential Revision: https://reviews.llvm.org/D84257
Translated processes talk with a different debugserver, shipped with
macOS 11. This patch detects whether a process is translated and
attaches to the correct debugserver implementation.
It's the first patch of a series. Tested on the lldb test suite.
Differential Revision: https://reviews.llvm.org/D82491
All entry points into ProcessGDBRemote that connect to the debug server
should connect to the replay server instead during reproducer replay.
This patch adds the necessary logic for ConnectRemote, which is
accessible from the SB API. This fixes active replay for
TestRecognizeBreakpoint.py as described in D78588.
Summary:
This packet is necessary to make lldb work with the remote-gdb stub in
user mode qemu when running position-independent binaries. It reports
the relative position (load bias) of the loaded executable wrt. the
addresses in the file itself.
Lldb needs to know this information in order to correctly set the load
address of the executable. Normally, lldb would be able to find this out
on its own by following the breadcrumbs in the process auxiliary vector,
but we can't do this here because qemu does not support the
qXfer:auxv:read packet.
This patch does not implement full scope of the qOffsets packet (it only
supports packets with identical code, data and bss offsets), because it
is not fully clear how should the different offsets be handled and I am
not aware of a producer which would make use of this feature (qemu will
always
<https://github.com/qemu/qemu/blob/master/linux-user/elfload.c#L2436>
return the same value for code and data offsets). In fact, even gdb
ignores the offset for the bss sections, and uses the "data" offset
instead. So, until the we need more of this packet, I think it's best
to stick to the simplest solution possible. This patch simply rejects
replies with non-uniform offsets.
Reviewers: clayborg, jasonmolenda
Subscribers: lldb-commits
Tags: #lldb
Differential Revision: https://reviews.llvm.org/D74598
- reduce indentation by removing the defensive
GetID()!=INVALID_PROCESS_ID check -- this function is only called when
an attach or launch succeeds
- replace LLDB_LOGF with LLDB_LOG
This is a step towards making the initialize and terminate calls be
generated by CMake, which in turn is towards making it possible to
disable plugins at configuration time.
Differential revision: https://reviews.llvm.org/D74245
This is how it should've been and brings it more in line with
std::string_view. There should be no functional change here.
This is mostly mechanical from a custom clang-tidy check, with a lot of
manual fixups. It uncovers a lot of minor inefficiencies.
This doesn't actually modify StringRef yet, I'll do that in a follow-up.
Summary:
A *.cpp file header in LLDB (and in LLDB) should like this:
```
//===-- TestUtilities.cpp -------------------------------------------------===//
```
However in LLDB most of our source files have arbitrary changes to this format and
these changes are spreading through LLDB as folks usually just use the existing
source files as templates for their new files (most notably the unnecessary
editor language indicator `-*- C++ -*-` is spreading and in every review
someone is pointing out that this is wrong, resulting in people pointing out that this
is done in the same way in other files).
This patch removes most of these inconsistencies including the editor language indicators,
all the different missing/additional '-' characters, files that center the file name, missing
trailing `===//` (mostly caused by clang-format breaking the line).
Reviewers: aprantl, espindola, jfb, shafik, JDevlieghere
Reviewed By: JDevlieghere
Subscribers: dexonsmith, wuzish, emaste, sdardis, nemanjai, kbarton, MaskRay, atanasyan, arphaman, jfb, abidh, jsji, JDevlieghere, usaxena95, lldb-commits
Tags: #lldb
Differential Revision: https://reviews.llvm.org/D73258
When running the test suite with always capture on, a handful of tests
are failing because they have multiple targets and therefore multiple
GDB remote connections. The current reproducer infrastructure is capable
of dealing with that.
This patch reworks the GDB remote provider to support multiple GDB
remote connections, similar to how the reproducers support shadowing
multiple command interpreter inputs. The provider now keeps a list of
packet recorders which deal with a single GDB remote connection. During
replay we rely on the order of creation to match the number of packets
to the GDB remote connection.
Differential revision: https://reviews.llvm.org/D71105
Summary:
Previously the ABI plugin exposed some "register infos" and the
gdb-remote code used those to fill in the missing bits. Now, the
"filling in" code is in the ABI plugin itself, and the gdb-remote code
just invokes that.
The motivation for this is two-fold:
a) the "augmentation" logic is useful outside of process gdb-remote. For
instance, it would allow us to avoid repeating the register number
definitions in minidump code.
b) It gives more implementation freedom to the ABI classes. Now that
these "register infos" are essentially implementation details, classes
can use other methods to obtain dwarf/eh_frame register numbers -- for
instance they can consult llvm MC layer.
Since the augmentation code was not currently tested anywhere, I took
the opportunity to create a simple test for it.
Reviewers: jasonmolenda, clayborg, tatyana-krasnukha
Subscribers: aprantl, lldb-commits
Tags: #lldb
Differential Revision: https://reviews.llvm.org/D70906
Following up on https://reviews.llvm.org/D62221, this change introduces
the settings plugin.process.gdb-remote.use-g-packet-for-reading. When
they are on, 'g' packets are used for reading registers.
Using 'g' packets can improve performance by reducing the number of
packets exchanged between client and server when a large number of
registers needs to be fetched.
Differential revision: https://reviews.llvm.org/D62931
This patch replaces the hand-rolled JSON emission in StructuredData with
LLVM's JSON library.
Differential revision: https://reviews.llvm.org/D68248
llvm-svn: 373359
Summary:
It uses the new ability of ABI plugins to vend llvm::MCRegisterInfo
structs (which is what is needed to turn dwarf register numbers into
strings).
Reviewers: JDevlieghere, aprantl, jasonmolenda
Subscribers: tatyana-krasnukha, lldb-commits
Differential Revision: https://reviews.llvm.org/D67966
llvm-svn: 373208
Summary:
This patch converts FileSystem::Open from this prototype:
Status
Open(File &File, const FileSpec &file_spec, ...);
to this one:
llvm::Expected<std::unique_ptr<File>>
Open(const FileSpec &file_spec, ...);
This is beneficial on its own, as llvm::Expected is a more modern
and recommended error type than Status. It is also a necessary step
towards https://reviews.llvm.org/D67891, and further developments
for lldb_private::File.
Reviewers: JDevlieghere, jasonmolenda, labath
Reviewed By: labath
Subscribers: mgorny, lldb-commits
Tags: #lldb
Differential Revision: https://reviews.llvm.org/D67996
llvm-svn: 373003
Originally the idea was for providers to be defined close to where they
are used. While this helped designing the providers in such a way that
they don't depend on each other, it also means that it's not possible to
access them from a central place. This proved to be a problem for some
providers and resulted in them living in the reproducer class.
The ProcessGDBRemote provider is the last remaining exception. This
patch makes things consistent and moves it into the reproducer like the
other providers.
llvm-svn: 371685
This removes the CleanUp class and replaces its usages with llvm's
ScopeExit, which has similar semantics.
Differential revision: https://reviews.llvm.org/D67378
llvm-svn: 371474
plugin.
Unfortunately the test is currently XFAILed because of missing changes
to the clang driver.
Differential Revision: https://reviews.llvm.org/D67124
llvm-svn: 370931
This patch removes the two variant of StringExtractor::GetStringRef that
return (non-)const references to std::string. The non-const one was
being abused to reinitialize the StringExtractor and its uses are
replaced by calls to the copy asignment operator. The const variant was
refactored to return an actual llvm::StringRef.
llvm-svn: 369493
Now that we've moved to C++14, we no longer need the llvm::make_unique
implementation from STLExtras.h. This patch is a mechanical replacement
of (hopefully) all the llvm::make_unique instances across the monorepo.
Differential revision: https://reviews.llvm.org/D66259
llvm-svn: 368933
This function is not portable, and there are only a handful of usages of
it anyway. Replacing it with std::this_thread::sleep_for enables us to
get rid of the compatibility code in PosixApi.h.
llvm-svn: 367814
Summary:
This is a bit more explicit, and makes it possible to build LLDB without
varying the -I lines per-directory.
(The latter is useful because many build systems only allow this to be
configured per-library, and LLDB is insufficiently layered to be split into
multiple libraries on stricter build systems).
(My comment on D65185 has some more context)
Reviewers: JDevlieghere, labath, chandlerc, jdoerfert
Reviewed By: labath
Subscribers: mgorny, lldb-commits
Tags: #lldb
Differential Revision: https://reviews.llvm.org/D65397
Patch by Sam McCall!
llvm-svn: 367241
Right now our Properties.inc only generates the initializer for the
options list but not the array declaration boilerplate around it. As the
array definition is identical for all arrays, we might as well also let
the Properties.inc generate it alongside the initializers.
Unfortunately we cannot do the same for enums, as there's this magic
ePropertyExperimental, which needs to come at the end to be interpreted
correctly. Hopefully we can get rid of this in the future and do the
same for the property enums.
Differential revision: https://reviews.llvm.org/D65353
llvm-svn: 367238
Property definitions are currently defined in a PropertyDefinition array
and have a corresponding enum to index in this array. Unfortunately this
is quite error prone. Indeed, just today we found an incorrect merge
where a discrepancy between the order of the enum values and their
definition caused the test suite to fail spectacularly.
Tablegen can streamline the process of generating the property
definition table while at the same time guaranteeing that the enums stay
in sync. That's exactly what this patch does. It adds a new tablegen
file for the properties, building on top of the infrastructure that
Raphael added recently for the command options. It also introduces two
new tablegen backends: one for the property definitions and one for
their corresponding enums.
It might be worth mentioning that I generated most of the tablegen
definitions from the existing property definitions, by adding a dump
method to the struct. This seems both more efficient and less error
prone that copying everything over by hand. Only Enum properties needed
manual fixup for the EnumValues and DefaultEnumValue fields.
Differential revision: https://reviews.llvm.org/D65185
llvm-svn: 367058
Summary:
Here's a replacement for D62504. I thought I could use LoadModules to implement this but in reality I can't because there are at few issues with it:
* The LoadModules assumes that the list returned by GetLoadedModuleList is comprehensive in the sense that reflects all the mapped segments, however, this is not true, for instance VDSO entry is not there since it's loaded manually by LoadVDSO using GetMemoryRegionInfo and it doesn't represent a specific shared object in disk. Because of this LoadModules will unload the VDSO module.
* The loader (interpreter) module might have also been loaded using GetMemoryRegionInfo, this is true when we launch the process and the rendezvous structure is not yet available (done through LoadInterpreterModule()). The problem here is that this entry will point to the same file name as the one found in /proc/pid/maps, however, when we read the same module from the r_debug.link_map structure it might be under a different name. This is true at least on CentOS where the loader is a symlink. Because of this LoadModules will unload and load the module in a way where the rendezvous breakpoint is unresolved but not resolved again (because we add the new module first and remove the old one after).
The symlink issue might be fixable by first unloading the old and loading the news (but sounds super brittle), however, I'm not sure how to fix the VDSO issue.
Since I can't trust it I'm just going to use GetLoadedModuleList directly with the same logic that we use today for when we read the linked list in lldb. The only safe thing to do here is to only calculate differences between different snapshots of the svr4 packet itself. This will also cut the dependency this plugin has from LoadModules.
I separated the 2 logics into 2 different functions (remote and not remote) because I don't like mixing 2 different logics in the same function with if/else's. Two different functions makes it easier to reason with I believe. However, I did abstract away the logic that decides if we should take a snapshot or add/remove modules so both functions could reuse it.
The other difference between the two is that on the UpdateSOEntriesFromRemote I take the snapshot only once when state = Consistent because I didn't find a good reason to always update that, as we already got the list from state = Add | Remove. I probably should use the same logic on UpdateSOEntries though I don't see a reason not to since it's really using the same data, just read in different places. Any thoughts here?
It might also be worthwhile to add a test to make sure we don't unload modules that were not actually "unloaded" like the vdso. I haven't done this yet though.
This diff is also missing the option for svr4 like proposed in https://reviews.llvm.org/D62503#1564296, I'll start working on this but wanted to have this up first.
Reviewers: labath, jankratochvil, clayborg, xiaobai
Reviewed By: labath
Subscribers: srhines, JDevlieghere, lldb-commits
Tags: #lldb
Differential Revision: https://reviews.llvm.org/D64013
llvm-svn: 367020
This patch replaces explicit calls to log::Printf with the new LLDB_LOGF
macro. The macro is similar to LLDB_LOG but supports printf-style format
strings, instead of formatv-style format strings.
So instead of writing:
if (log)
log->Printf("%s\n", str);
You'd write:
LLDB_LOG(log, "%s\n", str);
This change was done mechanically with the command below. I replaced the
spurious if-checks with vim, since I know how to do multi-line
replacements with it.
find . -type f -name '*.cpp' -exec \
sed -i '' -E 's/log->Printf\(/LLDB_LOGF\(log, /g' "{}" +
Differential revision: https://reviews.llvm.org/D65128
llvm-svn: 366936
Change the interface to return an expected, instead of taking a Status
pointer.
Differential revision: https://reviews.llvm.org/D64163
llvm-svn: 365226
Summary:
This option allow the toggling of the libraries-svr4 usage in ProcessGDBRemote. It's a follow up of https://reviews.llvm.org/D62503#1564296 and it's meant to test / tweak this new packet with, hopefully, minimum impact and in a faster way.
Enable it with `settings set plugin.process.gdb-remote.use-libraries-svr4 true`. For now, by default it's false.
I didn't put tests up for this but I did test it manually.
Reviewers: labath, jankratochvil
Reviewed By: labath
Subscribers: lldb-commits
Tags: #lldb
Differential Revision: https://reviews.llvm.org/D64112
llvm-svn: 365059
on a thread. When talking to some older gdb-remote stubs, We were getting
a stop reason from the stop reply packet and setting it on the relevant
thread before we updated the full stop list. That would get discarded when
the full list was updated.
Also, if you already have a thread list when you go to see if there is an
Operating System plugin, and you do indeed load a new OS plugin, you have to
re-fetch the thread list or it will only show the raw threads.
Differential Revision: https://reviews.llvm.org/D62887
llvm-svn: 364666
The qemu x86_64 target returns a target.xml register definition file which
includes other xml files and they include others, etc. Also, the registers
are not put in register groups like lldb wants to see.
This patch (1) puts registers that aren't in a register group in a "general"
register group, (2) change ProcessGDBRemote::GetGDBServerRegisterInfo to
be a method that starts the parsing, asking a recurisve function to fetch
and parse target.xml, (3) adds
ProcessGDBRemote::GetGDBServerRegisterInfoXMLAndProcess which can recusively
call itself to read and parse included xml files, (4) in addition to expecting
the top-level <target> element (which only happens in the top level xml file),
also an xml file that consists of a <feature> node - read the register
defintions and includes from that <feature> element.
<rdar://problem/49537922>
Differential revision: https://reviews.llvm.org/D63802
llvm-svn: 364484
This replaces the `info` typedef with a nested struct named Info. This
means we now have FooProvider and FooProvider::Info, instead of two
related but separate classes FooProvider and FooInfo. This change is
mostly cosmetic.
llvm-svn: 363211
Summary:
This is the second patch to improve module loading in a series that started here (where I explain the motivation and solution): https://reviews.llvm.org/D62499
I need to read the aux vector to know where the r_debug map with the loaded libraries are.
The AuxVector class was made generic so it could be reused between the POSIX-DYLD plugin and NativeProcess*. The class itself ended up in the ProcessUtility plugin.
Reviewers: clayborg, xiaobai, labath, JDevlieghere
Reviewed By: clayborg, labath, JDevlieghere
Subscribers: emaste, JDevlieghere, mgorny, lldb-commits
Tags: #lldb
Differential Revision: https://reviews.llvm.org/D62500
llvm-svn: 363098
Summary:
NFC = [[ https://llvm.org/docs/Lexicon.html#nfc | Non functional change ]]
This commit is the result of modernizing the LLDB codebase by using
`nullptr` instread of `0` or `NULL`. See
https://clang.llvm.org/extra/clang-tidy/checks/modernize-use-nullptr.html
for more information.
This is the command I ran and I to fix and format the code base:
```
run-clang-tidy.py \
-header-filter='.*' \
-checks='-*,modernize-use-nullptr' \
-fix ~/dev/llvm-project/lldb/.* \
-format \
-style LLVM \
-p ~/llvm-builds/debug-ninja-gcc
```
NOTE: There were also changes to `llvm/utils/unittest` but I did not
include them because I felt that maybe this library shall be updated in
isolation somehow.
NOTE: I know this is a rather large commit but it is a nobrainer in most
parts.
Reviewers: martong, espindola, shafik, #lldb, JDevlieghere
Reviewed By: JDevlieghere
Subscribers: arsenm, jvesely, nhaehnle, hiraditya, JDevlieghere, teemperor, rnkovacs, emaste, kubamracek, nemanjai, ki.stfu, javed.absar, arichardson, kbarton, jrtc27, MaskRay, atanasyan, dexonsmith, arphaman, jfb, jsji, jdoerfert, lldb-commits, llvm-commits
Tags: #lldb, #llvm
Differential Revision: https://reviews.llvm.org/D61847
llvm-svn: 361484
Summary:
According to [C128] "Virtual functions should specify exactly one
of `virtual`, `override`, or `final`", I've added override where a
virtual function is overriden but the explicit `override` keyword
was missing. Whenever both `virtual` and `override` were specified,
I removed `virtual`. As C.128 puts it:
> [...] writing more than one of these three is both redundant and
> a potential source of errors.
I anticipate a discussion about whether or not to add `override` to
destructors but I went for it because of an example in [ISOCPP1000].
Let me repeat the comment for you here:
Consider this code:
```
struct Base {
virtual ~Base(){}
};
struct SubClass : Base {
~SubClass() {
std::cout << "It works!\n";
}
};
int main() {
std::unique_ptr<Base> ptr = std::make_unique<SubClass>();
}
```
If for some odd reason somebody removes the `virtual` keyword from the
`Base` struct, the code will no longer print `It works!`. So adding
`override` to destructors actively protects us from accidentally
breaking our code at runtime.
[C128]: https://github.com/isocpp/CppCoreGuidelines/blob/master/CppCoreGuidelines.md#c128-virtual-functions-should-specify-exactly-one-of-virtual-override-or-final
[ISOCPP1000]: https://github.com/isocpp/CppCoreGuidelines/issues/1000#issuecomment-476951555
Reviewers: teemperor, JDevlieghere, davide, shafik
Reviewed By: teemperor
Subscribers: kwk, arphaman, kadircet, lldb-commits
Tags: #lldb
Differential Revision: https://reviews.llvm.org/D61440
llvm-svn: 359868
This is part two of the change started in r359330. This patch moves the
ownership of the script interpreter from the command interpreter into
the debugger. I would've preferred to remove the lazy initialization,
however the fact that the scripting language is set after the debugger
is created makes that tricky. So for now this does exactly the same
thing as when it was under the command interpreter. The result is that
this patch is fully NFC.
Differential revision: https://reviews.llvm.org/D61211
llvm-svn: 359354
A lot of comments in LLDB are surrounded by an ASCII line to delimit the
begging and end of the comment.
Its use is not really consistent across the code base, sometimes the
lines are longer, sometimes they are shorter and sometimes they are
omitted. Furthermore, it looks kind of weird with the 80 column limit,
where the comment actually extends past the line, but not by much.
Furthermore, when /// is used for Doxygen comments, it looks
particularly odd. And when // is used, it incorrectly gives the
impression that it's actually a Doxygen comment.
I assume these lines were added to improve distinguishing between
comments and code. However, given that todays editors and IDEs do a
great job at highlighting comments, I think it's worth to drop this for
the sake of consistency. The alternative is fixing all the
inconsistencies, which would create a lot more churn.
Differential revision: https://reviews.llvm.org/D60508
llvm-svn: 358135
This is a follow-up to r357829 (https://reviews.llvm.org/D60340) to
see whether increasing the packet timeout for non-asan builds could
also positively affect the stability of non-asan bots.
llvm-svn: 357954
Since these timeouts guard against catastrophic error in debugserver,
I also increased all of them to the maximum value among them.
The motivation for this test was the observation that an asanified
LLDB would often exhibit seemingly random test failures that could be
traced back to debugserver packets getting out of sync. With this path
applied I can no longer reproduce the one particular failure mode that
I was investigating.
rdar://problem/49441261
Differential Revision: https://reviews.llvm.org/D60340
llvm-svn: 357829
Yesterday I noticed a reproducer test failing after making a local
change. Removing the reproducer directory solved the issue. Add a test
case that detects this.
llvm-svn: 355941
My apologies for the large patch. With the exception of ConstString.h
itself it was entirely produced by sed.
ConstString has exactly one const char * data member, so passing a
ConstString by reference is not any more efficient than copying it by
value. In both cases a single pointer is passed. But passing it by
value makes it harder to accidentally return the address of a local
object.
(This fixes rdar://problem/48640859 for the Apple folks)
Differential Revision: https://reviews.llvm.org/D59030
llvm-svn: 355553
Given that we have a target named Symbols, one wonders why a
file named Symbols.cpp is not in this target. To be clear,
the functions exposed from this file are really focused on
*locating* a symbol file on a given host, which is where the
ambiguity comes in. However, it makes more sense conceptually
to be in the Symbols target. While some of the specific places
to search for symbol files might change depending on the Host,
this is not inherently true in the same way that, for example,
"accessing the file system" or "starting threads" is
fundamentally dependent on the Host.
PDBs, for example, recently became a reality on non-Windows platforms,
and it's theoretically possible that DSYMs could become a thing on non
MacOSX platforms (maybe in a remote debugging scenario). Other types of
symbol files, such as DWO, DWP, etc have never been tied to any Host
platform anyway.
After this patch, there is only one remaining dependency from
Host to Target.
Differential Revision: https://reviews.llvm.org/D58730
llvm-svn: 355032
The `ap` suffix is a remnant of lldb's former use of auto pointers,
before they got deprecated. Although all their uses were replaced by
unique pointers, some variables still carried the suffix.
In r353795 I removed another auto_ptr remnant, namely redundant calls to
::get for unique_pointers. Jim justly noted that this is a good
opportunity to clean up the variable names as well.
I went over all the changes to ensure my find-and-replace didn't have
any undesired side-effects. I hope I didn't miss any, but if you end up
at this commit doing a git blame on a weirdly named variable, please
know that the change was unintentional.
llvm-svn: 353912
This enables the function to be called with a StringRef without jumping
through any hoops. I rename the function to "PutStringAsRawHex8" to
honor the extended interface. I also remove ".c_str()" from any calls to
this function I could find.
llvm-svn: 353841
Unlike std::make_unique, which is only available since C++14,
std::make_shared is available since C++11. Not only is std::make_shared
a lot more readable compared to ::reset(new), it also performs a single
heap allocation for the object and control block.
Differential revision: https://reviews.llvm.org/D57990
llvm-svn: 353764
to reflect the new license.
We understand that people may be surprised that we're moving the header
entirely to discuss the new license. We checked this carefully with the
Foundation's lawyer and we believe this is the correct approach.
Essentially, all code in the project is now made available by the LLVM
project under our new license, so you will see that the license headers
include that license only. Some of our contributors have contributed
code under our old license, and accordingly, we have retained a copy of
our old license notice in the top-level files in each project and
repository.
llvm-svn: 351636
In the original reproducer design, I expected providers to be more
dynamic than they turned out. For example, we don't have any instances
where one provider has multiple files. Additionally, I expected there to
be less locality between capture and replay, with the provider being
defined in one place and the replay code to live in another. Both
contributed to the design of the provider info.
This patch refactors the reproducer info to be something static. This
means less magic strings and better type checking. The new design still
allows for the capture and replay code to live in different places as
long as they both have access to the new statically defined info class.
I didn't completely get rid of the index, because it is useful for (1)
sanity checking and (2) knowing what files are used by the reproducer.
Differential revision: https://reviews.llvm.org/D56814
llvm-svn: 351501
Using compare is verbose, bug prone and potentially inefficient (because
of early termination). Replace relevant call sites with the (in)equality
operator.
llvm-svn: 349972
This patch simplifies boolean expressions acorss LLDB. It was generated
using clang-tidy with the following command:
run-clang-tidy.py -checks='-*,readability-simplify-boolean-expr' -format -fix $PWD
Differential revision: https://reviews.llvm.org/D55584
llvm-svn: 349215
When building with MSVC, the type `Module` is ambiguous due to both the
lldb_private and llvm namespaces being used. Use the elaborated type
instead to resolve the ambiguity.
llvm-svn: 348332
When I landed the initial reproducer framework I knew there were some
things that needed improvement. Rather than bundling it with a patch
that adds more functionality I split it off into this patch. I also
think the API is stable enough to add unit testing, which is included in
this patch as well.
Other improvements include:
- Refactor how we initialize the loader and generator.
- Improve naming consistency: capture and replay seems the least ambiguous.
- Index providers by name and make sure there's only one of each.
- Add convenience methods for creating and accessing providers.
Differential revision: https://reviews.llvm.org/D54616
llvm-svn: 347716
This patch removes the comments grouping header includes. They were
added after running IWYU over the LLDB codebase. However they add little
value, are often outdates and burdensome to maintain.
llvm-svn: 346626
This patch removes the comments following the header includes. They were
added after running IWYU over the LLDB codebase. However they add little
value, are often outdates and burdensome to maintain.
Differential revision: https://reviews.llvm.org/D54385
llvm-svn: 346625
This patch modifies how we open File instances in LLDB. Rather than
passing a path or FileSpec to the constructor, we now go through the
virtual file system. This is needed in order to make things work with
the VFS in the future.
Differential revision: https://reviews.llvm.org/D54020
llvm-svn: 346049
This patch removes the logic for resolving paths out of FileSpec and
updates call sites to rely on the FileSystem class instead.
Differential revision: https://reviews.llvm.org/D53915
llvm-svn: 345890
This patch removes the Exists method from FileSpec and updates its uses
with calls to the FileSystem.
Differential revision: https://reviews.llvm.org/D53845
llvm-svn: 345854
Add support in ProcessGDBRemote::GetGDBServerRegisterInfo
for recognizing a generic "arm" architecture that will be used if
nothing better is available so that we don't ignore the register
definitions if we didn't already have an architecture set.
Also in ProcessGDBRemote::DoConnectRemote don't set the target
arch unless we have a valid architecture to set it to.
Platform::ConnectProcess will try to get the current target's
architecture, or the default architecture, when creating the
target for the connection to be attempted. If lldb was started
with a target binary, we want to create this target with that
architecture in case the remote gdb stub doesn't supply a
qHostInfo arch.
Add logging to Target::MergeArchitecture.
<rdar://problem/34916465>
llvm-svn: 345106
This is an NFC commit to refactor the "load dependent files" parameter
from a boolean to an enum value. We want to be able to specify a
default, in which case we decide whether or not to load the dependent
files based on whether the target is an executable or not (i.e. a
dylib).
This is a dependency for D51934.
Differential revision: https://reviews.llvm.org/D51859
llvm-svn: 342633
These three classes have no external dependencies, but they are used
from various low-level APIs. Moving them down to Utility improves
overall code layering (although it still does not break any particular
dependency completely).
The XCode project will need to be updated after this change.
Differential Revision: https://reviews.llvm.org/D49740
llvm-svn: 339127
Summary:
This patch gets rid of the C-string parameter in the RawCommandObject::DoExecute function,
making the code simpler and less memory unsafe.
There seems to be a assumption in some command objects that this parameter could be a nullptr,
but from what I can see the rest of the API doesn't actually allow this (and other command
objects and related code pieces dereference this parameter without any checks).
Especially CommandObjectRegexCommand has error handling code for a nullptr that is now gone.
Reviewers: davide, jingham, teemperor
Reviewed By: teemperor
Subscribers: jingham, lldb-commits
Differential Revision: https://reviews.llvm.org/D49207
llvm-svn: 336955
Summary:
This has multiple advantages:
- we need only one function argument/instance variable instead of three
- no need to default initialize variables
- no custom parsing code
- VersionTuple has comparison operators, which makes version comparisons much
simpler
Reviewers: zturner, friss, clayborg, jingham
Subscribers: emaste, lldb-commits
Differential Revision: https://reviews.llvm.org/D47889
llvm-svn: 334950
SetFile has an optional style argument which defaulted to the native
style. This patch makes that argument mandatory so clients of the
FileSpec class are forced to think about the correct syntax.
At the same time this introduces a (protected) convenience method to
update the file from within the FileSpec class that keeps the current
style.
These two changes together prevent a potential pitfall where the style
might be forgotten, leading to the path being updated and the style
unintentionally being changed to the host style.
llvm-svn: 334663
This is intended as a clean up after the big clang-format commit
(r280751), which unfortunately resulted in many of the comment
paragraphs in LLDB being very hard to read.
FYI, the script I used was:
import textwrap
import commands
import os
import sys
import re
tmp = "%s.tmp"%sys.argv[1]
out = open(tmp, "w+")
with open(sys.argv[1], "r") as f:
header = ""
text = ""
comment = re.compile(r'^( *//) ([^ ].*)$')
special = re.compile(r'^((([A-Z]+[: ])|([0-9]+ )).*)|(.*;)$')
for line in f:
match = comment.match(line)
if match and not special.match(match.group(2)):
# skip intentionally short comments.
if not text and len(match.group(2)) < 40:
out.write(line)
continue
if text:
text += " " + match.group(2)
else:
header = match.group(1)
text = match.group(2)
continue
if text:
filled = textwrap.wrap(text, width=(78-len(header)),
break_long_words=False)
for l in filled:
out.write(header+" "+l+'\n')
text = ""
out.write(line)
os.rename(tmp, sys.argv[1])
Differential Revision: https://reviews.llvm.org/D46144
llvm-svn: 331197
Summary:
If the remote stub sends a specific error message instead of just a E??
code, we can use this to display a more informative error message
instead of just the generic "unable to attach" message.
I write a test for this using the SB API.
On the console this will show up like:
(lldb) process attach ...
error: attach failed: <STUB-MESSAGE>
if the stub supports error messages, or:
error: attach failed: Error ??
if it doesn't.
Reviewers: jingham, JDevlieghere
Subscribers: lldb-commits
Differential Revision: https://reviews.llvm.org/D45573
llvm-svn: 330247
Summary:
The Args class is used in plenty of places besides the command
interpreter (e.g., anything requiring an argc+argv combo, such as when
launching a process), so it needs to be in a lower layer. Now that the
class has no external dependencies, it can be moved down to the Utility
module.
This removes the last (direct) dependency from the Host module to
Interpreter, so I remove the Interpreter module from Host's dependency
list.
Reviewers: zturner, jingham, davide
Subscribers: mgorny, lldb-commits
Differential Revision: https://reviews.llvm.org/D45480
llvm-svn: 330200
When we're dealing with virtual (memory) threads created by the OS
plugins, there's no guarantee that the real thread and the backing
thread share a protocol ID. Instead, we should iterate over the memory
threads to find the virtual thread that is backed by the current real
thread.
Differential revision: https://reviews.llvm.org/D45497
rdar://36485830
The original revision (r329891) was reverted because the associated
tests ran into a deadlock on the Linux bots. That problem was resolved
by r330002.
llvm-svn: 330005
When we're dealing with virtual (memory) threads created by the OS
plugins, there's no guarantee that the real thread and the backing
thread share a protocol ID. Instead, we should iterate over the memory
threads to find the virtual thread that is backed by the current real
thread.
Differential revision: https://reviews.llvm.org/D45497
rdar://36485830
llvm-svn: 329891
Summary:
The idea behind this is to move the functionality which depend on other lldb
classes into a separate class. This way, the Args class can be turned
into a lightweight arc+argv wrapper and moved into the lower lldb
layers.
Reviewers: jingham, zturner
Subscribers: lldb-commits
Differential Revision: https://reviews.llvm.org/D44306
llvm-svn: 329677
While trying to use this header I noticed that it is not in the include
folder. Move it to there and update all #includes to reference that file
correctly.
llvm-svn: 327996
The difference between this and the previous patch is that now we use
ELF physical addresses only for loading objects into the target (and the
rest of the module load address logic still uses virtual addresses).
Summary:
When writing an object file over gdb-remote, use the vFlashErase, vFlashWrite, and vFlashDone commands if the write address is in a flash memory region. A bare metal target may have this kind of setup.
- Update ObjectFileELF to set load addresses using physical addresses. A typical case may be a data section with a physical address in ROM and a virtual address in RAM, which should be loaded to the ROM address.
- Add support for querying the target's qXfer:memory-map, which contains information about flash memory regions, leveraging MemoryRegionInfo data structures with minor modifications
- Update ProcessGDBRemote to use vFlash commands in DoWriteMemory when the target address is in a flash region
Original discussion at http://lists.llvm.org/pipermail/lldb-dev/2018-January/013093.html
Reviewers: clayborg, labath
Reviewed By: labath
Subscribers: llvm-commits, arichardson, emaste, mgorny, lldb-commits
Differential Revision: https://reviews.llvm.org/D42145
Patch by Owen Shaw <llvm@owenpshaw.net>.
llvm-svn: 327970
This reverts commit r326261 as it introduces inconsistencies in the
handling of load addresses for ObjectFileELF -- some parts of the class
use physical addresses, and some use virtual. This has manifested itself
as us not being able to set the load address of the vdso "module" on
android.
llvm-svn: 326367
Summary:
When writing an object file over gdb-remote, use the vFlashErase, vFlashWrite, and vFlashDone commands if the write address is in a flash memory region. A bare metal target may have this kind of setup.
- Update ObjectFileELF to set load addresses using physical addresses. A typical case may be a data section with a physical address in ROM and a virtual address in RAM, which should be loaded to the ROM address.
- Add support for querying the target's qXfer:memory-map, which contains information about flash memory regions, leveraging MemoryRegionInfo data structures with minor modifications
- Update ProcessGDBRemote to use vFlash commands in DoWriteMemory when the target address is in a flash region
Original discussion at http://lists.llvm.org/pipermail/lldb-dev/2018-January/013093.html
Reviewers: clayborg, labath
Reviewed By: labath
Subscribers: arichardson, emaste, mgorny, lldb-commits
Differential Revision: https://reviews.llvm.org/D42145
Patch by Owen Shaw <llvm@owenpshaw.net>
llvm-svn: 326261
Removing the template arguments and most of the mutating methods from
CleanUp makes it easier to understand and reuse.
In its present state, CleanUp would be too cumbersome to adapt to cases
where multiple objects need to be released. Take for example this change
in swift-lldb:
https://github.com/apple/swift-lldb/pull/334/files#diff-6f474df750f75c8ba675f2a8408a5629R219
This change is simple to express with the new CleanUp, but not so simple
with the old version.
Differential Revision: https://reviews.llvm.org/D43662
llvm-svn: 325964
been specified yet (either by the user, or by one of the lldb
extensions like qHostInfo or qProcessInfo), and the target.xml
includes a <architecture> tag specifying x86_64, set the architecture
appropriately.
I'm not sure what we can expect to see in the <architecture> tag, so
I'm only doing this for x86_64 right now where I've seen "i386:x86_64"
used. I've seen a target.xml from a jtag board that sends just "arm"
because it doesn't know more specifically what type of board it is
connected to...
<rdar://problem/29908970>
llvm-svn: 322339
Summary:
Gdb servers like openocd may send many $O reply packets for the client to output during a qRcmd command sequence. Currently, lldb interprets the first O packet as an unexpected response. Besides generating no output, this causes lldb to get out of sync with future commands because it continues reading O packets from the first command as response to subsequent commands.
This patch handles any O packets during an qRcmd, treating the first non-O packet as the true response.
Preliminary discussion at http://lists.llvm.org/pipermail/lldb-dev/2018-January/013078.html
Reviewers: clayborg
Reviewed By: clayborg
Subscribers: labath, lldb-commits
Differential Revision: https://reviews.llvm.org/D41745
Patch by Owen Shaw <llvm@owenpshaw.net>
llvm-svn: 322190
Summary:
There was some confusion in the code about how to represent process
environment. Most of the code (ab)used the Args class for this purpose,
but some of it used a more basic StringList class instead. In either
case, the fact that the underlying abstraction did not provide primitive
operations for the typical environment operations meant that even a
simple operation like checking for an environment variable value was
several lines of code.
This patch adds a separate Environment class, which is essentialy a
llvm::StringMap<std::string> in disguise. To standard StringMap
functionality, it adds a couple of new functions, which are specific to
the environment use case:
- (most important) envp conversion for passing into execve() and likes.
Instead of trying to maintain a constantly up-to-date envp view, it
provides a function which creates a envp view on demand, with the
expectation that this will be called as the very last thing before
handing the value to the system function.
- insert(StringRef KeyEqValue) - splits KeyEqValue into (key, value)
pair and inserts it into the environment map.
- compose(value_type KeyValue) - takes a map entry and converts in back
into "KEY=VALUE" representation.
With this interface most of the environment-manipulating code becomes
one-liners. The only tricky part was maintaining compatibility in
SBLaunchInfo, which expects that the environment entries are accessible
by index and that the returned const char* is backed by the launch info
object (random access into maps is hard and the map stores the entry in
a deconstructed form, so we cannot just return a .c_str() value). To
solve this, I have the SBLaunchInfo convert the environment into the
"envp" form, and use it to answer the environment queries. Extra code is
added to make sure the envp version is always in sync.
(This also improves the layering situation as Args was in the Interpreter module
whereas Environment is in Utility.)
Reviewers: zturner, davide, jingham, clayborg
Subscribers: emaste, lldb-commits, mgorny
Differential Revision: https://reviews.llvm.org/D41359
llvm-svn: 322174
The rationale here is that ArchSpec is used throughout the codebase,
including in places which should not depend on the rest of the code in
the Core module.
This commit touches many files, but most of it is just renaming of
#include lines. In a couple of cases, I removed the #include ArchSpec
line altogether, as the file was not using it. In one or two places,
this necessitated adding other #includes like lldb-private-defines.h.
llvm-svn: 318048
Using TCP sockets is insecure against local attackers, and possibly
against remote attackers too (some vulnerabilities may allow tricking a
browser to make a request to localhost). Use socketpair (which is immune
to such attacks) on all Unix platforms.
Patch by Demi Marie Obenour < demiobenour@gmail.com >
Differential Revision: https://reviews.llvm.org/D33213
llvm-svn: 314127
OpenOCD sends register classes as two separate <feature> nodes, fixed parser to process both of them.
OpenOCD returns "l" in response to "qfThreadInfo", so IsUnsupportedResponse() was false and we were ending up without any threads in the process. I think it's reasonable to assume that there's always at least one thread.
llvm-svn: 313442
Summary:
It defined a couple of types (condition_t) which we don't use anymore,
as we have c++11 goodies now. I remove these definitions.
Also it unnecessarily included a couple of headers which weren't
necessary for it's operation. I remove these, and place the includes in
the relevant files (usually .cpp, usually in Host code) which use them.
This allows us to reduce namespace pollution in most of the lldb files
which don't need the OS-specific definitions.
Reviewers: zturner, jingham
Subscribers: ki.stfu, lldb-commits
Differential Revision: https://reviews.llvm.org/D35113
llvm-svn: 308304
Summary:
This patch adds support for sending strings along with
error codes in the reply packets. The implementation is
based on the feedback recieved in the lldb-dev mailing
list. The patch also adds an extra packet for the client
to query if the server has the capability to provide
strings along with error replys.
Reviewers: labath, jingham, sas, lldb-commits, clayborg
Reviewed By: labath, clayborg
Differential Revision: https://reviews.llvm.org/D34945
llvm-svn: 307768
Summary:
The classes have no dependencies, and they are used both by lldb and
lldb-server, so it makes sense for them to live in the lowest layers.
Reviewers: zturner, jingham
Subscribers: emaste, mgorny, lldb-commits
Differential Revision: https://reviews.llvm.org/D34746
llvm-svn: 306682
some methods in the ABI need a Process to do their work.
Instead of passing it in as a one-off argument to those
methods, this patch puts it in the base class and the methods
can retrieve if it needed.
Note that ABI's are sometimes built without a Process
(e.g. SBTarget::GetStackRedZoneSize) so it's entirely
possible that the process weak pointer will not be
able to reconsistitue into a strong pointer.
<rdar://problem/32526754>
llvm-svn: 306633
Summary:
The changes consist of new packets for trace manipulation and
trace collection. The new packets are also documented. The packets
are capable of providing custom trace specific parameters to start
tracing and also retrieve such configuration from the server.
Reviewers: clayborg, lldb-commits, tberghammer, labath, zturner
Reviewed By: clayborg, labath
Subscribers: krytarowski, lldb-commits
Differential Revision: https://reviews.llvm.org/D32585
llvm-svn: 303972
It was returning const std::string& which was leading to
unnecessary copies all over the place, and preventing people
from doing things like Dict->GetValueForKeyAsString("foo", ref);
llvm-svn: 302875
This renames the LLDB error class to Status, as discussed
on the lldb-dev mailing list.
A change of this magnitude cannot easily be done without
find and replace, but that has potential to catch unwanted
occurrences of common strings such as "Error". Every effort
was made to find all the obvious things such as the word "Error"
appearing in a string, etc, but it's possible there are still
some lingering occurences left around. Hopefully nothing too
serious.
llvm-svn: 302872
If QPassSignals packaet is supported by lldb-server, lldb-client will
utilize it and ask the server to ignore signals that don't require stops
or notifications.
Such signals will be immediately re-injected into inferior to continue
normal execution.
Differential Revision: https://reviews.llvm.org/D30520
llvm-svn: 297231
Summary:
The std::call_once implementation in libstdc++ has problems on few systems: NetBSD, OpenBSD and Linux PPC. LLVM ships with a homegrown implementation llvm::call_once to help on these platforms.
This change is required in the NetBSD LLDB port. std::call_once with libstdc++ results with crashing the debugger.
Sponsored by <The NetBSD Foundation>
Reviewers: labath, joerg, emaste, mehdi_amini, clayborg
Reviewed By: labath, clayborg
Subscribers: #lldb
Tags: #lldb
Differential Revision: https://reviews.llvm.org/D29288
llvm-svn: 294202
This moves the following classes from Core -> Utility.
ConstString
Error
RegularExpression
Stream
StreamString
The goal here is to get lldbUtility into a state where it has
no dependendencies except on itself and LLVM, so it can be the
starting point at which to start untangling LLDB's dependencies.
These are all low level and very widely used classes, and
previously lldbUtility had dependencies up to lldbCore in order
to use these classes. So moving then down to lldbUtility makes
sense from both the short term and long term perspective in
solving this problem.
Differential Revision: https://reviews.llvm.org/D29427
llvm-svn: 293941
Summary: LLDB was using packet size advertised by the target as the max memory size to write in one go. It is wrong because packets have other overhead apart from memory payload. Also memory transferred through 'm' and 'M' packets needs 2 bytes in packet to transfer 1 of memory.
Reviewers: clayborg
Reviewed By: clayborg
Subscribers: lldb-commits
Differential Revision: https://reviews.llvm.org/D28808
llvm-svn: 292987
Summary:
The server was no longer sending the thread PCs the way the client
expected them.
I changed the server to send them back as a threadstop info field,
similar to the Apple version of the server.
I also changed the client to look for them there, before querying the
server.
I added a test to ensure the server doesn't stop sending them.
Reviewed By: labath
Differential Revision: https://reviews.llvm.org/D28880
Author: Jason Majors
llvm-svn: 292611
Michał Górny