This continues the push away from hard-coded knowledge about functions
towards attributes. We'll use this to annotate free(), realloc() and
cousins and obviate the hard-coded list of free functions.
Differential Revision: https://reviews.llvm.org/D123083
specifying DW_AT_trampoline as a string. Also update the signature
of DIBuilder::createFunction to reflect this addition.
Differential Revision: https://reviews.llvm.org/D123697
IRLinker builds a work list of functions to materialize, then moves them
from a source module to a destination module one at a time.
This is a problem for blockaddress Constants, since they need not refer
to the function they are used in; IPSCCP is quite good at sinking these
constants deep into other functions when passed as arguments.
This would lead to curious errors during LTO:
ld.lld: error: Never resolved function from blockaddress ...
based on the ordering of function definitions in IR.
The problem was that IRLinker would basically do:
for function f in worklist:
materialize f
splice f from source module to destination module
in one pass, with Functions being lazily added to the running worklist.
This confuses BitcodeReader, which cannot disambiguate whether a
blockaddress is referring to a function which has not yet been parsed
("materialized") or is simply empty because its body was spliced out.
This causes BitcodeReader to insert Functions into its BasicBlockFwdRefs
list incorrectly, as it will never re-materialize an already
materialized (but spliced out) function.
Because of the possibility that blockaddress Constants may appear in
Functions other than the ones they reference, this patch adds a new
bitcode function code FUNC_CODE_BLOCKADDR_USERS that is a simple list of
Functions that contain BlockAddress Constants that refer back to this
Function, rather then the Function they are scoped in. We then
materialize those functions when materializing `f` from the example loop
above. This might over-materialize Functions should the user of
BitcodeReader ultimately decide not to link those Functions, but we can
at least now we can avoid this ordering related issue with blockaddresses.
Fixes: https://github.com/llvm/llvm-project/issues/52787
Fixes: https://github.com/ClangBuiltLinux/linux/issues/1215
Reviewed By: dexonsmith
Differential Revision: https://reviews.llvm.org/D120781
Returning `std::array<uint8_t, N>` is better ergonomics for the hashing functions usage, instead of a `StringRef`:
* When returning `StringRef`, client code is "jumping through hoops" to do string manipulations instead of dealing with fixed array of bytes directly, which is more natural
* Returning `std::array<uint8_t, N>` avoids the need for the hasher classes to keep a field just for the purpose of wrapping it and returning it as a `StringRef`
As part of this patch also:
* Introduce `TruncatedBLAKE3` which is useful for using BLAKE3 as the hasher type for `HashBuilder` with non-default hash sizes.
* Make `MD5Result` inherit from `std::array<uint8_t, 16>` which improves & simplifies its API.
Differential Revision: https://reviews.llvm.org/D123100
Necessary when importing class template specializations that have
simplified template names (may otherwise be necessary - eg: Sony
requires template parameter DIEs even with unsimplified names, but short
of always importing names this is the best I can do for now) - long term
this probably needs a flag for the DICompositeType to specify whether it
needs template parameters on declarations & that flag could power this
behavior, rather than inspecting the name.
This allows both explicitly enabling and explicitly disabling
opaque pointers, in anticipation of the default switching at some
point.
This also slightly changes the rules by allowing calls if either
the opaque pointer mode has not yet been set (explicitly or
implicitly) or if the value remains unchanged.
This allows us to more easily test opaque pointers e.g. in the case of
ThinLTO where we only have to pass -opaque-pointers to the frontend.
Reviewed By: #opaque-pointers, nikic
Differential Revision: https://reviews.llvm.org/D122048
Includes verifier changes checking the elementtype, clang codegen
changes to emit the elementtype, and ISel changes using the elementtype.
Basically the same as D120527.
Reviewed By: #opaque-pointers, nikic
Differential Revision: https://reviews.llvm.org/D121847
Includes verifier changes checking the elementtype, clang codegen
changes to emit the elementtype, and ISel changes using the elementtype.
Reviewed By: #opaque-pointers, nikic
Differential Revision: https://reviews.llvm.org/D120527
We should not be using APIs here that try to fetch the attribute
from both the call attributes and the function attributes. Otherwise
we'll try to upgrade a non-existent sret attribute on the call using
the attribute on the function.
Since D101045, allocas are no longer required to be part of the
default alloca address space. There may be allocas in multiple
different address spaces. However, the bitcode reader would
simply assume the default alloca address space, resulting in
either an error or incorrect IR.
Add an optional record for allocas which encodes the address
space.
As these errors are detected after the instruction has already been
created (but before it has been inserted into the function), we
also need to delete it.
This will let us start moving away from hard-coded attributes in
MemoryBuiltins.cpp and put the knowledge about various attribute
functions in the compilers that emit those calls where it probably
belongs.
Differential Revision: https://reviews.llvm.org/D117921
This completes the propagation of type IDs through bitcode reading,
and switches remaining uses of getPointerElementType() to use
contained type IDs.
The main new thing here is that sometimes we need to create a type
ID for a type that was not explicitly encoded in bitcode (or we
don't know its ID at the current point). For such types we create a
"virtual" type ID, which is cached based on the type and the
contained type IDs. Luckily, we generally only need zero or one
contained type IDs, and in the one case where we need two, we can
get away with not including it in the cache key.
With this change, we pass the entirety of llvm-test-suite at O3
with opaque pointers.
Differential Revision: https://reviews.llvm.org/D120471
Currently adding attribute no_sanitize("bounds") isn't disabling
-fsanitize=local-bounds (also enabled in -fsanitize=bounds). The Clang
frontend handles fsanitize=array-bounds which can already be disabled by
no_sanitize("bounds"). However, instrumentation added by the
BoundsChecking pass in the middle-end cannot be disabled by the
attribute.
The fix is very similar to D102772 that added the ability to selectively
disable sanitizer pass on certain functions.
In this patch, if no_sanitize("bounds") is provided, an additional
function attribute (NoSanitizeBounds) is attached to IR to let the
BoundsChecking pass know we want to disable local-bounds checking. In
order to support this feature, the IR is extended (similar to D102772)
to make Clang able to preserve the information and let BoundsChecking
pass know bounds checking is disabled for certain function.
Reviewed By: melver
Differential Revision: https://reviews.llvm.org/D119816
This is the next step towards supporting bitcode auto upgrade with
opaque pointers. The ValueList now stores the Value* together with
its associated type ID, which allows inspecting the original pointer
element type of arbitrary values.
This is a largely mechanical change threading the type ID through
various places. I've left TODOTypeID placeholders in a number of
places where determining the type ID is either non-trivial or
requires allocating a new type ID not present in the original
bitcode. For this reason, the new type IDs are also not used for
anything yet (apart from propagation). They will get used once the
TODOs are resolved.
Differential Revision: https://reviews.llvm.org/D119821
This is step two of supporting autoupgrade of old bitcode to opaque
pointers. Rather than tracking the element type ID of pointers in
particular, track all type IDs that a type contains. This allows us
to recover the element type in more complex situations, e.g. when
we need to determine the pointer element type of a vector element
or function type parameter.
Differential Revision: https://reviews.llvm.org/D119339
We have the `clang -cc1` command-line option `-funwind-tables=1|2` and
the codegen option `VALUE_CODEGENOPT(UnwindTables, 2, 0) ///< Unwind
tables (1) or asynchronous unwind tables (2)`. However, this is
encoded in LLVM IR by the presence or the absence of the `uwtable`
attribute, i.e. we lose the information whether to generate want just
some unwind tables or asynchronous unwind tables.
Asynchronous unwind tables take more space in the runtime image, I'd
estimate something like 80-90% more, as the difference is adding
roughly the same number of CFI directives as for prologues, only a bit
simpler (e.g. `.cfi_offset reg, off` vs. `.cfi_restore reg`). Or even
more, if you consider tail duplication of epilogue blocks.
Asynchronous unwind tables could also restrict code generation to
having only a finite number of frame pointer adjustments (an example
of *not* having a finite number of `SP` adjustments is on AArch64 when
untagging the stack (MTE) in some cases the compiler can modify `SP`
in a loop).
Having the CFI precise up to an instruction generally also means one
cannot bundle together CFI instructions once the prologue is done,
they need to be interspersed with ordinary instructions, which means
extra `DW_CFA_advance_loc` commands, further increasing the unwind
tables size.
That is to say, async unwind tables impose a non-negligible overhead,
yet for the most common use cases (like C++ exceptions), they are not
even needed.
This patch extends the `uwtable` attribute with an optional
value:
- `uwtable` (default to `async`)
- `uwtable(sync)`, synchronous unwind tables
- `uwtable(async)`, asynchronous (instruction precise) unwind tables
Reviewed By: MaskRay
Differential Revision: https://reviews.llvm.org/D114543
Make it clearer that this method is specifically for pointer
element types, and not other element types. This distinction will
be relevant in the future.
The somewhat unusual spelling is to make sure this does not show
up when grepping for getPointerElementType.
Auto-upgrades that rely on the pointer element type do not work in
opaque pointer mode. The idea behind this patch is that we can
instead work with type IDs, for which we can retain the pointer
element type. For typed pointer bitcode, we will have a distinct
type ID for pointers with distinct element type, even if there will
only be a single corresponding opaque pointer type.
The disclaimer here is that this is only the first step of the change,
and there are still more getPointerElementType() calls to remove.
I expect that two more patches will be needed:
1. Track all "contained" type IDs, which will allow us to handle
function params (which are contained in the function type) and GEPs
(which may use vectors of pointers)
2. Track type IDs for values, which is e.g. necessary to handle loads.
Differential Revision: https://reviews.llvm.org/D118694
This header is very large (3M Lines once expended) and was included in location
where dwarf-specific information were not needed.
More specifically, this commit suppresses the dependencies on
llvm/BinaryFormat/Dwarf.h in two headers: llvm/IR/IRBuilder.h and
llvm/IR/DebugInfoMetadata.h. As these headers (esp. the former) are widely used,
this has a decent impact on number of preprocessed lines generated during
compilation of LLVM, as showcased below.
This is achieved by moving some definitions back to the .cpp file, no
performance impact implied[0].
As a consequence of that patch, downstream user may need to manually some extra
files:
llvm/IR/IRBuilder.h no longer includes llvm/BinaryFormat/Dwarf.h
llvm/IR/DebugInfoMetadata.h no longer includes llvm/BinaryFormat/Dwarf.h
In some situations, codes maybe relying on the fact that
llvm/BinaryFormat/Dwarf.h was including llvm/ADT/Triple.h, this hidden
dependency now needs to be explicit.
$ clang++ -E -Iinclude -I../llvm/include ../llvm/lib/Transforms/Scalar/*.cpp -std=c++14 -fno-rtti -fno-exceptions | wc -l
after: 10978519
before: 11245451
Related Discourse thread: https://llvm.discourse.group/t/include-what-you-use-include-cleanup
[0] https://llvm-compile-time-tracker.com/compare.php?from=fa7145dfbf94cb93b1c3e610582c495cb806569b&to=995d3e326ee1d9489145e20762c65465a9caeab4&stat=instructions
Differential Revision: https://reviews.llvm.org/D118781
DIStringType is used to encode the debug info of a character object
in Fortran. A Fortran deferred-length character object is typically
implemented as a pair of the following two pieces of info: An address
of the raw storage of the characters, and the length of the object.
The stringLocationExp field contains the DIExpression to get to the
raw storage.
This patch also enables the emission of DW_AT_data_location attribute
in a DW_TAG_string_type debug info entry based on stringLocationExp
in DIStringType.
A test is also added to ensure that the bitcode reader is backward
compatible with the old DIStringType format.
Differential Revision: https://reviews.llvm.org/D117586
Instead use either Type::getPointerElementType() or
Type::getNonOpaquePointerElementType().
This is part of D117885, in preparation for deprecating the API.
This is the autoupgrade part of D116531. If old bitcode is missing
the elementtype attribute for indirect inline asm constraints,
automatically add it. As usual, this only works when upgrading
in typed mode, we haven't figured out upgrade in opaque mode yet.
The bitcode reader expected that the pointers are typed,
so that it can extract the function type for the assembly
so `bitc::CST_CODE_INLINEASM` did not explicitly store said function type.
I'm not really sure how the upgrade path will look for existing bitcode,
but i think we can easily support opaque pointers going forward,
by simply storing the function type.
Reviewed By: #opaque-pointers, nikic
Differential Revision: https://reviews.llvm.org/D116341
Can't get the pointee type of an opaque pointer,
but in that case said attributes must already be typed,
so just don't try to rewrite them if they already are.
With Control-Flow Integrity (CFI), the LowerTypeTests pass replaces
function references with CFI jump table references, which is a problem
for low-level code that needs the address of the actual function body.
For example, in the Linux kernel, the code that sets up interrupt
handlers needs to take the address of the interrupt handler function
instead of the CFI jump table, as the jump table may not even be mapped
into memory when an interrupt is triggered.
This change adds the no_cfi constant type, which wraps function
references in a value that LowerTypeTestsModule::replaceCfiUses does not
replace.
Link: https://github.com/ClangBuiltLinux/linux/issues/1353
Reviewed By: nickdesaulniers, pcc
Differential Revision: https://reviews.llvm.org/D108478
Instead track global objects with implicit comdat in a separate
set. The current approach of temporarily assigning an invalid
comdat pointer is incompatible with D115864.
This trivial patch runs clang-format on some unformatted files before
doing logic changes and prevent hard to review diffs.
Differential Revision: https://reviews.llvm.org/D113572
Add UNIQUED and DISTINCT properties in Metadata.def and use them to
implement restrictions on the `distinct` property of MDNodes:
* DIExpression can currently be parsed from IR or read from bitcode
as `distinct`, but this property is silently dropped when printing
to IR. This causes accepted IR to fail to round-trip. As DIExpression
appears inline at each use in the canonical form of IR, it cannot
actually be `distinct` anyway, as there is no syntax to describe it.
* Similarly, DIArgList is conceptually always uniqued. It is currently
restricted to only appearing in contexts where there is no syntax for
`distinct`, but for consistency it is treated equivalently to
DIExpression in this patch.
* DICompileUnit is already restricted to always being `distinct`, but
along with adding general support for the inverse restriction I went
ahead and described this in Metadata.def and updated the parser to be
general. Future nodes which have this restriction can share this
support.
The new UNIQUED property applies to DIExpression and DIArgList, and
forbids them to be `distinct`. It also implies they are canonically
printed inline at each use, rather than via MDNode ID.
The new DISTINCT property applies to DICompileUnit, and requires it to
be `distinct`.
A potential alternative change is to forbid the non-inline syntax for
DIExpression entirely, as is done with DIArgList implicitly by requiring
it appear in the context of a function. For example, we would forbid:
!named = !{!0}
!0 = !DIExpression()
Instead we would only accept the equivalent inlined version:
!named = !{!DIExpression()}
This essentially removes the ability to create a `distinct` DIExpression
by construction, as there is no syntax for `distinct` inline. If this
patch is accepted as-is, the result would be that the non-canonical
version is accepted, but the following would be an error and produce a diagnostic:
!named = !{!0}
; error: 'distinct' not allowed for !DIExpression()
!0 = distinct !DIExpression()
Also update some documentation to consistently use the inline syntax for
DIExpression, and to describe the restrictions on `distinct` for nodes
where applicable.
Reviewed By: StephenTozer, t-tye
Differential Revision: https://reviews.llvm.org/D104827
Verify that the resolver exists, that it is a defined
Function, and that its return type matches the ifunc's
type. Add corresponding check to BitcodeReader, change
clang to emit the correct type, and fix tests to comply.
Reviewed By: MaskRay
Differential Revision: https://reviews.llvm.org/D112349
Avoid naming some Expected<T> values in the Bitcode reader by using
takeError() and moveInto() more often. This follows the smaller set of
changes included in 2410fb4616.
As discussed in:
* https://reviews.llvm.org/D94166
* https://lists.llvm.org/pipermail/llvm-dev/2020-September/145031.html
The GlobalIndirectSymbol class lost most of its meaning in
https://reviews.llvm.org/D109792, which disambiguated getBaseObject
(now getAliaseeObject) between GlobalIFunc and everything else.
In addition, as long as GlobalIFunc is not a GlobalObject and
getAliaseeObject returns GlobalObjects, a GlobalAlias whose aliasee
is a GlobalIFunc cannot currently be modeled properly. Creating
aliases for GlobalIFuncs does happen in the wild (e.g. glibc). In addition,
calling getAliaseeObject on a GlobalIFunc will currently return nullptr,
which is undesirable because it should return the object itself for
non-aliases.
This patch refactors the GlobalIFunc class to inherit directly from
GlobalObject, and removes GlobalIndirectSymbol (while inlining the
relevant parts into GlobalAlias and GlobalIFunc). This allows for
calling getAliaseeObject() on a GlobalIFunc to return the GlobalIFunc
itself, making getAliaseeObject() more consistent and enabling
alias-to-ifunc to be properly modeled in the IR.
I exercised some judgement in the API clients of GlobalIndirectSymbol:
some were 'monomorphized' for GlobalAlias and GlobalIFunc, and
some remained shared (with the type adapted to become GlobalValue).
Reviewed By: MaskRay
Differential Revision: https://reviews.llvm.org/D108872
This adds the `--dump-blockinfo` flag to `llvm-bcanalyzer`, allowing a sufficiently motivated user to dump (parts of) the `BLOCKINFO_BLOCK` block. The default behavior is unchanged, and `--dump-blockinfo` only takes effect in the same context as other flags that control dump behavior (i.e., requires that `--dump` is also passed).
Reviewed By: tejohnson
Differential Revision: https://reviews.llvm.org/D107536
The current code checks whether the vector's element type is a valid structure element type, rather than a valid vector element type. The two have separate implementations and but only accept very slightly different sets of types, which is probably why this wasn't caught before.
Differential Revision: https://reviews.llvm.org/D109655
Currently the max alignment representable is 1GB, see D108661.
Setting the align of an object to 4GB is desirable in some cases to make sure the lower 32 bits are clear which can be used for some optimizations, e.g. https://crbug.com/1016945.
This uses an extra bit in instructions that carry an alignment. We can store 15 bits of "free" information, and with this change some instructions (e.g. AtomicCmpXchgInst) use 14 bits.
We can increase the max alignment representable above 4GB (up to 2^62) since we're only using 33 of the 64 values, but I've just limited it to 4GB for now.
The one place we have to update the bitcode format is for the alloca instruction. It stores its alignment into 5 bits of a 32 bit bitfield. I've added another field which is 8 bits and should be future proof for a while. For backward compatibility, we check if the old field has a value and use that, otherwise use the new field.
Updating clang's max allowed alignment will come in a future patch.
Reviewed By: hans
Differential Revision: https://reviews.llvm.org/D110451
Currently the max alignment representable is 1GB, see D108661.
Setting the align of an object to 4GB is desirable in some cases to make sure the lower 32 bits are clear which can be used for some optimizations, e.g. https://crbug.com/1016945.
This uses an extra bit in instructions that carry an alignment. We can store 15 bits of "free" information, and with this change some instructions (e.g. AtomicCmpXchgInst) use 14 bits.
We can increase the max alignment representable above 4GB (up to 2^62) since we're only using 33 of the 64 values, but I've just limited it to 4GB for now.
The one place we have to update the bitcode format is for the alloca instruction. It stores its alignment into 5 bits of a 32 bit bitfield. I've added another field which is 8 bits and should be future proof for a while. For backward compatibility, we check if the old field has a value and use that, otherwise use the new field.
Updating clang's max allowed alignment will come in a future patch.
Reviewed By: hans
Differential Revision: https://reviews.llvm.org/D110451
Currently the max alignment representable is 1GB, see D108661.
Setting the align of an object to 4GB is desirable in some cases to make sure the lower 32 bits are clear which can be used for some optimizations, e.g. https://crbug.com/1016945.
This uses an extra bit in instructions that carry an alignment. We can store 15 bits of "free" information, and with this change some instructions (e.g. AtomicCmpXchgInst) use 14 bits.
We can increase the max alignment representable above 4GB (up to 2^62) since we're only using 33 of the 64 values, but I've just limited it to 4GB for now.
The one place we have to update the bitcode format is for the alloca instruction. It stores its alignment into 5 bits of a 32 bit bitfield. I've added another field which is 8 bits and should be future proof for a while. For backward compatibility, we check if the old field has a value and use that, otherwise use the new field.
Updating clang's max allowed alignment will come in a future patch.
Reviewed By: hans
Differential Revision: https://reviews.llvm.org/D110451
As described on D111049, we're trying to remove the <string> dependency from error handling and replace uses of report_fatal_error(const std::string&) with the Twine() variant which can be forward declared.
Thinlink provides an opportunity to propagate function attributes across modules, enabling additional propagation opportunities.
This change propagates (currently default off, turn on with `disable-thinlto-funcattrs=1`) noRecurse and noUnwind based off of function summaries of the prevailing functions in bottom-up call-graph order. Testing on clang self-build:
1. There's a 35-40% increase in noUnwind functions due to the additional propagation opportunities.
2. Throughput is measured at 10-15% increase in thinlink time which itself is 1.5% of E2E link time.
Implementation-wise this adds the following summary function attributes:
1. noUnwind: function is noUnwind
2. mayThrow: function contains a non-call instruction that `Instruction::mayThrow` returns true on (e.g. windows SEH instructions)
3. hasUnknownCall: function contains calls that don't make it into the summary call-graph thus should not be propagated from (e.g. indirect for now, could add no-opt functions as well)
Testing:
Clang self-build passes and 2nd stage build passes check-all
ninja check-all with newly added tests passing
Reviewed By: tejohnson
Differential Revision: https://reviews.llvm.org/D36850
New field `elements` is added to '!DIImportedEntity', representing
list of aliased entities.
This is needed to dump optimized debugging information where all names
in a module are imported, but a few names are imported with overriding
aliases.
Reviewed By: dblaikie
Differential Revision: https://reviews.llvm.org/D109343
Like the shuffle, we should treat the select delayed so that
all constants can be resolved.
Reviewed By: efriedma
Differential Revision: https://reviews.llvm.org/D109053
Currently, opaque pointers are supported in two forms: The
-force-opaque-pointers mode, where all pointers are opaque and
typed pointers do not exist. And as a simple ptr type that can
coexist with typed pointers.
This patch removes support for the mixed mode. You either get
typed pointers, or you get opaque pointers, but not both. In the
(current) default mode, using ptr is forbidden. In -opaque-pointers
mode, all pointers are opaque.
The motivation here is that the mixed mode introduces additional
issues that don't exist in fully opaque mode. D105155 is an example
of a design problem. Looking at D109259, it would probably need
additional work to support mixed mode (e.g. to generate GEPs for
typed base but opaque result). Mixed mode will also end up
inserting many casts between i8* and ptr, which would require
significant additional work to consistently avoid.
I don't think the mixed mode is particularly valuable, as it
doesn't align with our end goal. The only thing I've found it to
be moderately useful for is adding some opaque pointer tests in
between typed pointer tests, but I think we can live without that.
Differential Revision: https://reviews.llvm.org/D109290
Functions can have a personality function, as well as prefix and
prologue data as additional operands. Unused operands are assigned
a dummy value of i1* null. This patch addresses multiple issues in
use-list order preservation for these:
* Fix verify-uselistorder to also enumerate the dummy values.
This means that now use-list order values of these values are
shuffled even if there is no other mention of i1* null in the
module. This results in failures of Assembler/call-arg-is-callee.ll,
Assembler/opaque-ptr.ll and Bitcode/use-list-order2.ll.
* The use-list order prediction in ValueEnumerator does not take
into account the fact that a global may use a value more than
once and leaves uses in the same global effectively unordered.
We should be comparing the operand number here, as we do for
the more general case.
* While we enumerate all operands of a function together (which
seems sensible to me), the bitcode reader would first resolve
prefix data for all function, then prologue data for all
functions, then personality functions for all functions. Change
this to resolve all operands for a given function together
instead.
Differential Revision: https://reviews.llvm.org/D109282
Generate btf_tag annotations for function parameters.
A field "annotations" is introduced to DILocalVariable, and
annotations are represented as an DINodeArray, similar to
DIComposite elements. The following example illustrates how
annotations are encoded in IR:
distinct !DILocalVariable(name: "info",, arg: 1, ..., annotations: !10)
!10 = !{!11, !12}
!11 = !{!"btf_tag", !"a"}
!12 = !{!"btf_tag", !"b"}
Differential Revision: https://reviews.llvm.org/D106620
Generate btf_tag annotations for DIGlobalVariable.
A field "annotations" is introduced to DIGlobalVariable, and
annotations are represented as an DINodeArray, similar to
DIComposite elements. The following example illustrates how
annotations are encoded in IR:
distinct !DIGlobalVariable(..., annotations: !10)
!10 = !{!11, !12}
!11 = !{!"btf_tag", !"a"}
!12 = !{!"btf_tag", !"b"}
Differential Revision: https://reviews.llvm.org/D106619
Generate btf_tag annotations for DISubprogram types.
A field "annotations" is introduced to DISubprogram, and
annotations are represented as an DINodeArray, similar to
DIComposite elements. The following example illustrates how
annotations are encoded in IR:
distinct !DISubprogram(..., annotations: !10)
!10 = !{!11, !12}
!11 = !{!"btf_tag", !"a"}
!12 = !{!"btf_tag", !"b"}
Differential Revision: https://reviews.llvm.org/D106618
Generate btf_tag annotations for DIDrived types. More specifically,
clang frontend generates the btf_tag annotations for record
fields. The annotations are represented as an DINodeArray
in DebugInfo. The following example illustrate how
annotations are encoded in IR:
distinct !DIDerivedType(tag: DW_TAG_member, ..., annotations: !10)
!10 = !{!11, !12}
!11 = !{!"btf_tag", !"a"}
!12 = !{!"btf_tag", !"b"}
Differential Revision: https://reviews.llvm.org/D106616
The purpose of __attribute__((disable_sanitizer_instrumentation)) is to
prevent all kinds of sanitizer instrumentation applied to a certain
function, Objective-C method, or global variable.
The no_sanitize(...) attribute drops instrumentation checks, but may
still insert code preventing false positive reports. In some cases
though (e.g. when building Linux kernel with -fsanitize=kernel-memory
or -fsanitize=thread) the users may want to avoid any kind of
instrumentation.
Differential Revision: https://reviews.llvm.org/D108029
Clang patch D106614 added attribute btf_tag support. This patch
generates btf_tag annotations for DIComposite types.
A field "annotations" is introduced to DIComposite, and the
annotations are represented as an DINodeArray, similar to
DIComposite elements. The following example illustrates
how annotations are encoded in IR:
distinct !DICompositeType(..., annotations: !10)
!10 = !{!11, !12}
!11 = !{!"btf_tag", !"a"}
!12 = !{!"btf_tag", !"b"}
Each btf_tag annotation is represented as a 2D array of
meta strings. Each record may have more than one
btf_tag annotations, as in the above example.
Reland with additional fixes for llvm/unittests/IR/DebugTypeODRUniquingTest.cpp.
Differential Revision: https://reviews.llvm.org/D106615
Clang patch D106614 added attribute btf_tag support. This patch
generates btf_tag annotations for DIComposite types.
A field "annotations" is introduced to DIComposite, and the
annotations are represented as an DINodeArray, similar to
DIComposite elements. The following example illustrates
how annotations are encoded in IR:
distinct !DICompositeType(..., annotations: !10)
!10 = !{!11, !12}
!11 = !{!"btf_tag", !"a"}
!12 = !{!"btf_tag", !"b"}
Each btf_tag annotation is represented as a 2D array of
meta strings. Each record may have more than one
btf_tag annotations, as in the above example.
Differential Revision: https://reviews.llvm.org/D106615
In the textual format, `noduplicates` means no COMDAT/section group
deduplication is performed. Therefore, if both sets of sections are retained, and
they happen to define strong external symbols with the same names,
there will be a duplicate definition linker error.
In PE/COFF, the selection kind lowers to `IMAGE_COMDAT_SELECT_NODUPLICATES`.
The name describes the corollary instead of the immediate semantics. The name
can cause confusion to other binary formats (ELF, wasm) which have implemented/
want to implement the "no deduplication" selection kind. Rename it to be clearer.
Reviewed By: rnk
Differential Revision: https://reviews.llvm.org/D106319
For attributes in legacy bitcode that are now typed, explicitly
create a type attribute with nullptr type, the same as we do
for the attribute group representation. This is so we can assert
use of the correct constructor in the future.
Use the elementtype attribute introduced in D105407 for the
llvm.preserve.array/struct.index intrinsics. It carries the
element type of the GEP these intrinsics effectively encode.
This patch:
* Adds a verifier check that the attribute is required.
* Adds it in the IRBuilder methods for these intrinsics.
* Autoupgrades old bitcode without the attribute.
* Updates the lowering code to use the attribute rather than
the pointer element type.
* Updates lots of tests to specify the attribute.
* Adds -force-opaque-pointers to the intrinsic-array.ll test
to demonstrate they work now.
https://reviews.llvm.org/D106184
This implements the elementtype attribute specified in D105407. It
just adds the attribute and the specified verifier rules, but
doesn't yet make use of it anywhere.
Differential Revision: https://reviews.llvm.org/D106008
Assert that enum/int/type attributes go through the constructor
they are supposed to use.
To make sure this can't happen via invalid bitcode, explicitly
verify that the attribute kind if correct there.
Followup to D105658 to make AttrBuilder automatically work with
new type attributes. TableGen is tweaked to emit First/LastTypeAttr
markers, based on which we can handle type attributes
programmatically.
Differential Revision: https://reviews.llvm.org/D105763
Augie Fackler