We were calling find and then using operator[]. Instead keep the
iterator from find and use it to get the value.
Just happened to notice while investigating how we decide what extends
to use between basic blocks.
This patch refactors / simplifies salvageDebugInfoImpl(). The goal
here is to simplify the implementation of coro::salvageDebugInfo() in
a followup patch.
1. Change the return value to I.getOperand(0). Currently users of
salvageDebugInfoImpl() assume that the first operand is
I.getOperand(0). This patch makes this information explicit. A
nice side-effect of this change is that it allows us to salvage
expressions such as add i8 1, %a in the future.
2. Factor out the creation of a DIExpression and return an array of
DIExpression operations instead. This change allows users that
call salvageDebugInfoImpl() in a loop to avoid the costly
creation of temporary DIExpressions and to defer the creation of
a DIExpression until the end.
This patch does not change any functionality.
rdar://80227769
Differential Revision: https://reviews.llvm.org/D107383
This is recommit of the patch 16ff91ebcc,
reverted in 0c28a7c990 because it had
an error in call of getFastMathFlags (base type should be FPMathOperator
but not Instruction). The original commit message is duplicated below:
Clang has builtin function '__builtin_isnan', which implements C
library function 'isnan'. This function now is implemented entirely in
clang codegen, which expands the function into set of IR operations.
There are three mechanisms by which the expansion can be made.
* The most common mechanism is using an unordered comparison made by
instruction 'fcmp uno'. This simple solution is target-independent
and works well in most cases. It however is not suitable if floating
point exceptions are tracked. Corresponding IEEE 754 operation and C
function must never raise FP exception, even if the argument is a
signaling NaN. Compare instructions usually does not have such
property, they raise 'invalid' exception in such case. So this
mechanism is unsuitable when exception behavior is strict. In
particular it could result in unexpected trapping if argument is SNaN.
* Another solution was implemented in https://reviews.llvm.org/D95948.
It is used in the cases when raising FP exceptions by 'isnan' is not
allowed. This solution implements 'isnan' using integer operations.
It solves the problem of exceptions, but offers one solution for all
targets, however some can do the check in more efficient way.
* Solution implemented by https://reviews.llvm.org/D96568 introduced a
hook 'clang::TargetCodeGenInfo::testFPKind', which injects target
specific code into IR. Now only SystemZ implements this hook and it
generates a call to target specific intrinsic function.
Although these mechanisms allow to implement 'isnan' with enough
efficiency, expanding 'isnan' in clang has drawbacks:
* The operation 'isnan' is hidden behind generic integer operations or
target-specific intrinsics. It complicates analysis and can prevent
some optimizations.
* IR can be created by tools other than clang, in this case treatment
of 'isnan' has to be duplicated in that tool.
Another issue with the current implementation of 'isnan' comes from the
use of options '-ffast-math' or '-fno-honor-nans'. If such option is
specified, 'fcmp uno' may be optimized to 'false'. It is valid
optimization in general, but it results in 'isnan' always returning
'false'. For example, in some libc++ implementations the following code
returns 'false':
std::isnan(std::numeric_limits<float>::quiet_NaN())
The options '-ffast-math' and '-fno-honor-nans' imply that FP operation
operands are never NaNs. This assumption however should not be applied
to the functions that check FP number properties, including 'isnan'. If
such function returns expected result instead of actually making
checks, it becomes useless in many cases. The option '-ffast-math' is
often used for performance critical code, as it can speed up execution
by the expense of manual treatment of corner cases. If 'isnan' returns
assumed result, a user cannot use it in the manual treatment of NaNs
and has to invent replacements, like making the check using integer
operations. There is a discussion in https://reviews.llvm.org/D18513#387418,
which also expresses the opinion, that limitations imposed by
'-ffast-math' should be applied only to 'math' functions but not to
'tests'.
To overcome these drawbacks, this change introduces a new IR intrinsic
function 'llvm.isnan', which realizes the check as specified by IEEE-754
and C standards in target-agnostic way. During IR transformations it
does not undergo undesirable optimizations. It reaches instruction
selection, where is lowered in target-dependent way. The lowering can
vary depending on options like '-ffast-math' or '-ffp-model' so the
resulting code satisfies requested semantics.
Differential Revision: https://reviews.llvm.org/D104854
Clang has builtin function '__builtin_isnan', which implements C
library function 'isnan'. This function now is implemented entirely in
clang codegen, which expands the function into set of IR operations.
There are three mechanisms by which the expansion can be made.
* The most common mechanism is using an unordered comparison made by
instruction 'fcmp uno'. This simple solution is target-independent
and works well in most cases. It however is not suitable if floating
point exceptions are tracked. Corresponding IEEE 754 operation and C
function must never raise FP exception, even if the argument is a
signaling NaN. Compare instructions usually does not have such
property, they raise 'invalid' exception in such case. So this
mechanism is unsuitable when exception behavior is strict. In
particular it could result in unexpected trapping if argument is SNaN.
* Another solution was implemented in https://reviews.llvm.org/D95948.
It is used in the cases when raising FP exceptions by 'isnan' is not
allowed. This solution implements 'isnan' using integer operations.
It solves the problem of exceptions, but offers one solution for all
targets, however some can do the check in more efficient way.
* Solution implemented by https://reviews.llvm.org/D96568 introduced a
hook 'clang::TargetCodeGenInfo::testFPKind', which injects target
specific code into IR. Now only SystemZ implements this hook and it
generates a call to target specific intrinsic function.
Although these mechanisms allow to implement 'isnan' with enough
efficiency, expanding 'isnan' in clang has drawbacks:
* The operation 'isnan' is hidden behind generic integer operations or
target-specific intrinsics. It complicates analysis and can prevent
some optimizations.
* IR can be created by tools other than clang, in this case treatment
of 'isnan' has to be duplicated in that tool.
Another issue with the current implementation of 'isnan' comes from the
use of options '-ffast-math' or '-fno-honor-nans'. If such option is
specified, 'fcmp uno' may be optimized to 'false'. It is valid
optimization in general, but it results in 'isnan' always returning
'false'. For example, in some libc++ implementations the following code
returns 'false':
std::isnan(std::numeric_limits<float>::quiet_NaN())
The options '-ffast-math' and '-fno-honor-nans' imply that FP operation
operands are never NaNs. This assumption however should not be applied
to the functions that check FP number properties, including 'isnan'. If
such function returns expected result instead of actually making
checks, it becomes useless in many cases. The option '-ffast-math' is
often used for performance critical code, as it can speed up execution
by the expense of manual treatment of corner cases. If 'isnan' returns
assumed result, a user cannot use it in the manual treatment of NaNs
and has to invent replacements, like making the check using integer
operations. There is a discussion in https://reviews.llvm.org/D18513#387418,
which also expresses the opinion, that limitations imposed by
'-ffast-math' should be applied only to 'math' functions but not to
'tests'.
To overcome these drawbacks, this change introduces a new IR intrinsic
function 'llvm.isnan', which realizes the check as specified by IEEE-754
and C standards in target-agnostic way. During IR transformations it
does not undergo undesirable optimizations. It reaches instruction
selection, where is lowered in target-dependent way. The lowering can
vary depending on options like '-ffast-math' or '-ffp-model' so the
resulting code satisfies requested semantics.
Differential Revision: https://reviews.llvm.org/D104854
This adds handling for two cases:
1. A scalable vector where the element type is promoted.
2. A scalable vector where the element count is odd (or more generally,
not divisble by the element count of the part type).
(Some element types still don't work; for example, <vscale x 2 x i128>,
or <vscale x 2 x fp128>.)
Differential Revision: https://reviews.llvm.org/D105591
This patch legalizes the Machine Value Type introduced in D94096 for loads
and stores. A new target hook named getAsmOperandValueType() is added which
maps i512 to MVT::i64x8. GlobalISel falls back to DAG for legalization.
Differential Revision: https://reviews.llvm.org/D94097
This is mostly a minor convenience, but the pattern seems frequent
enough to be worthwhile (and we'll probably add more uses in the
future).
Differential Revision: https://reviews.llvm.org/D105850
This is a cleanup patch -- we're now able to support all flavours of
variable location in instruction referencing mode. This patch updates
various tests for debug instructions to be broader: numerous code paths
try to ignore debug isntructions, and they now have to ignore the
additional DBG_PHI and DBG_INSTR_REFs that we can generate.
A small amount of rework happens for LiveDebugVariables: as we don't need
to track live intervals through regalloc any more, we can get away with
unlinking debug instructions before regalloc, then re-inserting them after.
Note that this isn't (yet) true of DBG_VALUE_LISTs, they still have to go
through live interval tracking.
In SelectionDAG, add a helper lambda that emits half-formed DBG_INSTR_REFs
for arguments in instr-ref mode, DBG_VALUE otherwise. This is one of the
final locations where DBG_VALUEs are emitted for vreg arguments.
X86InstrInfo now un-sets the debug instr number on SUB instructions that
get mutated into CMP instructions. As the instruction no longer computes a
subtraction, we can't use it for variable locations.
Differential Revision: https://reviews.llvm.org/D88898
Previously we used the vector type, but we're loading/storing
invididual elements so I think only element alignment should matter.
Noticed while looking at the code for something else so I don't
have a test case.
Differential Revision: https://reviews.llvm.org/D105220
This intrinsic blocks floating point transformations by the optimizer.
Author: Pengfei
Reviewed By: LuoYuanke, Andy Kaylor, Craig Topper, kpn
Differential Revision: https://reviews.llvm.org/D99675
This is a partial reapply of the original commit and the followup commit
that were previously reverted; this reapply also includes a small fix
for a potential source of non-determinism, but also has a small change
to turn off variadic debug value salvaging, to ensure that any future
revert/reapply steps to disable and renable this feature do not risk
causing conflicts.
Differential Revision: https://reviews.llvm.org/D91722
This reverts commit 386b66b2fc.
This only applies to FastIsel. GlobalIsel seems to sidestep
the issue.
This fixes https://bugs.llvm.org/show_bug.cgi?id=46996
One of the things we do in llvm is decide if a type needs
consecutive registers. Previously, we just checked if it
was an array or not.
(plus an SVE specific check that is not changing here)
This causes some confusion when you arbitrary IR like:
```
%T1 = type { double, i1 };
define [ 1 x %T1 ] @foo() {
entry:
ret [ 1 x %T1 ] zeroinitializer
}
```
We see it is an array so we call CC_AArch64_Custom_Block
which bails out when it sees the i1, a type we don't want
to put into a block.
This leaves the location of the double in some kind of
intermediate state and leads to odd codegen. Which then crashes
the backend because it doesn't know how to implement
what it's been asked for.
You get this:
```
renamable $d0 = FMOVD0
$w0 = COPY killed renamable $d0
```
Rather than this:
```
$d0 = FMOVD0
$w0 = COPY $wzr
```
The backend knows how to copy 64 bit to 64 bit registers,
but not 64 to 32. It can certainly be taught how but the real
issue seems to be us even trying to assign a register block
in the first place.
This change makes the logic of
AArch64TargetLowering::functionArgumentNeedsConsecutiveRegisters
a bit more in depth. If we find an array, also check that all the
nested aggregates in that array have a single member type.
Then CC_AArch64_Custom_Block's assumption of a type that looks
like [ N x type ] will be valid and we get the expected codegen.
New tests have been added to exercise these situations. Note that
some of the output is not ABI compliant. The aim of this change is
to simply handle these situations and not to make our processing
of arbitrary IR ABI compliant.
Reviewed By: efriedma
Differential Revision: https://reviews.llvm.org/D104123
> This reapplies c0f3dfb9, which was reverted following the discovery of
> crashes on linux kernel and chromium builds - these issues have since
> been fixed, allowing this patch to re-land.
This reverts commit 36ec97f76a.
The change caused non-determinism in the compiler, see comments on the code
review at https://reviews.llvm.org/D91722.
Reverting to unbreak people's builds until that can be addressed.
This also reverts the follow-up "[DebugInfo] Limit the number of values
that may be referenced by a dbg.value" in
a0bd6105d8.
Parameter positions seem like they should be unsigned.
While there, make function names lowercase per coding standards.
Reviewed By: frasercrmck
Differential Revision: https://reviews.llvm.org/D103224
SwiftTailCC has a different set of requirements than the C calling convention
for a tail call. The exact argument sequence doesn't have to match, but fewer
ABI-affecting attributes are allowed.
Also make sure the musttail diagnostic triggers if a musttail call isn't
actually a tail call.
This patch adds a way for the target to configure the type it uses for
the explicit vector length operands of VP SDNodes. The type must be a
legal integer type (there is still no target-independent legalization of
this operand) and must currently be at least as big as i32, the type
used by the IR intrinsics. An implicit zero-extension takes place on
targets which choose a larger type. All VP nodes should be created with
this type used for the EVL operand.
This allows 64-bit RISC-V to avoid custom legalization of all VP nodes,
keeping them in their target-independent form for that bit longer.
Reviewed By: simoll
Differential Revision: https://reviews.llvm.org/D103027
Support virtual, physical and tied i128 register operands in inline assembly.
i128 is on SystemZ not really supported and is not a legal type and generally
such a value will be split into two i64 parts. There are however some
instructions that require a pair of two GPR64 registers contained in the GR128
bit reg class, which is untyped.
For inline assmebly operands, it proved to be very cumbersome to first follow
the general behavior of splitting an i128 operand into two parts and then
later rebuild the INLINEASM MI to have one GR128 register. Instead, some
minor common code changes were made to SelectionDAGBUilder to only create one
GR128 register part to begin with. In particular:
- getNumRegisters() now has an optional parameter "RegisterVT" which is
passed by AddInlineAsmOperands() and GetRegistersForValue().
- The bitcasting in GetRegistersForValue is not performed if RegVT is
Untyped.
- The RC for a tied use in AddInlineAsmOperands() is now computed either from
the tied def (virtual register), or by getMinimalPhysRegClass() (physical
register).
- InstrEmitter.cpp:EmitCopyFromReg() has been fixed so that the register
class (DstRC) can also be computed for an illegal type.
In the SystemZ backend getNumRegisters(), splitValueIntoRegisterParts() and
joinRegisterPartsIntoValue() have been implemented to handle i128 operands.
Differential Revision: https://reviews.llvm.org/D100788
Review: Ulrich Weigand
- When memory intrinsics, such as memcpy, the attached scoped AA
metadata is not passed down to the backend. As a result, the backend
cannot schedule relevant memory operations around them following that
hint. In this patch, SelectionDAG is enhanced to propagate that
metadata (scoped AA only) when they are lowered into loads and stores.
Differential Revision: https://reviews.llvm.org/D102215
D29668 enabled to avoid a useless copy of the argument value into an alloca if the caller places it in memory (as it often happens on x86) by directly forwarding the pointer to it. This optimization is illegal if the type contains padding bytes: if a truncating store into the alloca is replaced the upper bits are filled with garbage and produce code misbehaving at runtime.
Reviewed By: rnk
Differential Revision: https://reviews.llvm.org/D102153
This reapplies c0f3dfb9, which was reverted following the discovery of
crashes on linux kernel and chromium builds - these issues have since
been fixed, allowing this patch to re-land.
This reverts commit 4397b7095d.
This is a step towards relying more on node-level FMF rather than function-wide
or target settings.
I think it was just an oversight that we didn't get this path in D87361
or follow-on patches.
The lack of FMF propagation is blocking D90901 from converting tests to IR-level FMF.
We can't do much more than this currently because we also fail to propagate flags
from x86-specific node to generic FMA node. That would be another patch, so the
test just verifies that we can transfer from IR to initial SDAG node.
Differential Revision: https://reviews.llvm.org/D102725
For opaque pointers, we're trying to avoid uses of
PointerType::getElementType().
A couple of ISel places use PointerType::getElementType(). Some of these
are easy to fix by using ArgListEntry's indirect types.
The inalloca type wasn't stored there, as opposed to preallocated and
byval which have their indirect types available, so add it and use it.
This is a reland after an MSan fix in D102667.
Differential Revision: https://reviews.llvm.org/D101713
This patch is the Part-1 (FE Clang) implementation of HW Exception handling.
This new feature adds the support of Hardware Exception for Microsoft Windows
SEH (Structured Exception Handling).
This is the first step of this project; only X86_64 target is enabled in this patch.
Compiler options:
For clang-cl.exe, the option is -EHa, the same as MSVC.
For clang.exe, the extra option is -fasync-exceptions,
plus -triple x86_64-windows -fexceptions and -fcxx-exceptions as usual.
NOTE:: Without the -EHa or -fasync-exceptions, this patch is a NO-DIFF change.
The rules for C code:
For C-code, one way (MSVC approach) to achieve SEH -EHa semantic is to follow
three rules:
* First, no exception can move in or out of _try region., i.e., no "potential
faulty instruction can be moved across _try boundary.
* Second, the order of exceptions for instructions 'directly' under a _try
must be preserved (not applied to those in callees).
* Finally, global states (local/global/heap variables) that can be read
outside of _try region must be updated in memory (not just in register)
before the subsequent exception occurs.
The impact to C++ code:
Although SEH is a feature for C code, -EHa does have a profound effect on C++
side. When a C++ function (in the same compilation unit with option -EHa ) is
called by a SEH C function, a hardware exception occurs in C++ code can also
be handled properly by an upstream SEH _try-handler or a C++ catch(...).
As such, when that happens in the middle of an object's life scope, the dtor
must be invoked the same way as C++ Synchronous Exception during unwinding
process.
Design:
A natural way to achieve the rules above in LLVM today is to allow an EH edge
added on memory/computation instruction (previous iload/istore idea) so that
exception path is modeled in Flow graph preciously. However, tracking every
single memory instruction and potential faulty instruction can create many
Invokes, complicate flow graph and possibly result in negative performance
impact for downstream optimization and code generation. Making all
optimizations be aware of the new semantic is also substantial.
This design does not intend to model exception path at instruction level.
Instead, the proposed design tracks and reports EH state at BLOCK-level to
reduce the complexity of flow graph and minimize the performance-impact on CPP
code under -EHa option.
One key element of this design is the ability to compute State number at
block-level. Our algorithm is based on the following rationales:
A _try scope is always a SEME (Single Entry Multiple Exits) region as jumping
into a _try is not allowed. The single entry must start with a seh_try_begin()
invoke with a correct State number that is the initial state of the SEME.
Through control-flow, state number is propagated into all blocks. Side exits
marked by seh_try_end() will unwind to parent state based on existing
SEHUnwindMap[].
Note side exits can ONLY jump into parent scopes (lower state number).
Thus, when a block succeeds various states from its predecessors, the lowest
State triumphs others. If some exits flow to unreachable, propagation on those
paths terminate, not affecting remaining blocks.
For CPP code, object lifetime region is usually a SEME as SEH _try.
However there is one rare exception: jumping into a lifetime that has Dtor but
has no Ctor is warned, but allowed:
Warning: jump bypasses variable with a non-trivial destructor
In that case, the region is actually a MEME (multiple entry multiple exits).
Our solution is to inject a eha_scope_begin() invoke in the side entry block to
ensure a correct State.
Implementation:
Part-1: Clang implementation described below.
Two intrinsic are created to track CPP object scopes; eha_scope_begin() and eha_scope_end().
_scope_begin() is immediately added after ctor() is called and EHStack is pushed.
So it must be an invoke, not a call. With that it's also guaranteed an
EH-cleanup-pad is created regardless whether there exists a call in this scope.
_scope_end is added before dtor(). These two intrinsics make the computation of
Block-State possible in downstream code gen pass, even in the presence of
ctor/dtor inlining.
Two intrinsic, seh_try_begin() and seh_try_end(), are added for C-code to mark
_try boundary and to prevent from exceptions being moved across _try boundary.
All memory instructions inside a _try are considered as 'volatile' to assure
2nd and 3rd rules for C-code above. This is a little sub-optimized. But it's
acceptable as the amount of code directly under _try is very small.
Part-2 (will be in Part-2 patch): LLVM implementation described below.
For both C++ & C-code, the state of each block is computed at the same place in
BE (WinEHPreparing pass) where all other EH tables/maps are calculated.
In addition to _scope_begin & _scope_end, the computation of block state also
rely on the existing State tracking code (UnwindMap and InvokeStateMap).
For both C++ & C-code, the state of each block with potential trap instruction
is marked and reported in DAG Instruction Selection pass, the same place where
the state for -EHsc (synchronous exceptions) is done.
If the first instruction in a reported block scope can trap, a Nop is injected
before this instruction. This nop is needed to accommodate LLVM Windows EH
implementation, in which the address in IPToState table is offset by +1.
(note the purpose of that is to ensure the return address of a call is in the
same scope as the call address.
The handler for catch(...) for -EHa must handle HW exception. So it is
'adjective' flag is reset (it cannot be IsStdDotDot (0x40) that only catches
C++ exceptions).
Suppress push/popTerminate() scope (from noexcept/noTHrow) so that HW
exceptions can be passed through.
Original llvm-dev [RFC] discussions can be found in these two threads below:
https://lists.llvm.org/pipermail/llvm-dev/2020-March/140541.htmlhttps://lists.llvm.org/pipermail/llvm-dev/2020-April/141338.html
Differential Revision: https://reviews.llvm.org/D80344/new/
This extends any frame record created in the function to include that
parameter, passed in X22.
The new record looks like [X22, FP, LR] in memory, and FP is stored with 0b0001
in bits 63:60 (CodeGen assumes they are 0b0000 in normal operation). The effect
of this is that tools walking the stack should expect to see one of three
values there:
* 0b0000 => a normal, non-extended record with just [FP, LR]
* 0b0001 => the extended record [X22, FP, LR]
* 0b1111 => kernel space, and a non-extended record.
All other values are currently reserved.
If compiling for arm64e this context pointer is address-discriminated with the
discriminator 0xc31a and the DB (process-specific) key.
There is also an "i8** @llvm.swift.async.context.addr()" intrinsic providing
front-ends access to this slot (and forcing its creation initialized to nullptr
if necessary).
I've taken the following steps to add unwinding support from inline assembly:
1) Add a new `unwind` "attribute" (like `sideeffect`) to the asm syntax:
```
invoke void asm sideeffect unwind "call thrower", "~{dirflag},~{fpsr},~{flags}"()
to label %exit unwind label %uexit
```
2.) Add Bitcode writing/reading support + LLVM-IR parsing.
3.) Emit EHLabels around inline assembly lowering (SelectionDAGBuilder + GlobalISel) when `InlineAsm::canThrow` is enabled.
4.) Tweak InstCombineCalls/InlineFunction pass to not mark inline assembly "calls" as nounwind.
5.) Add clang support by introducing a new clobber: "unwind", which lower to the `canThrow` being enabled.
6.) Don't allow unwinding callbr.
Reviewed By: Amanieu
Differential Revision: https://reviews.llvm.org/D95745
This patch extends the vector type-conversion and legalization capabilities of
scalable vector types.
Firstly, `vscale x 1` types now behave more like the corresponding `vscale x
2+` types. This enables the integer promotion legalization of extended scalable
types, such as the promotion of `<vscale x 1 x i5>` to `<vscale x 1 x i8>`.
These `vscale x 1` types are also now better handled by
`getVectorTypeBreakdown`, where what looks like older handling for 1-element
fixed-length vector types was spuriously updated to include scalable types.
Widening of scalable types is now better supported, by using `INSERT_SUBVECTOR`
to insert the smaller scalable vector "value" type into the wider scalable
vector "part" type. This allows AArch64 to pass and return `vscale x 1` types
by value by widening.
There are still cases where we are unable to legalize `vscale x 1` types, such
as where expansion would require splitting the vector in two.
Reviewed By: sdesmalen
Differential Revision: https://reviews.llvm.org/D102073
For opaque pointers, we're trying to avoid uses of
PointerType::getElementType().
A couple of ISel places use PointerType::getElementType(). Some of these
are easy to fix by using ArgListEntry's indirect types.
The inalloca type wasn't stored there, as opposed to preallocated and
byval which have their indirect types available, so add it and use it.
Differential Revision: https://reviews.llvm.org/D101713
Removing an assertion introduced with D68945. The
patch was later reverted with 6531a78ac4, but failed
to remove this assertion. It causes a problem while
trying to split a 64-bit argument into sub registers.
Reviewed By: arsenm
Differential Revision: https://reviews.llvm.org/D101594
Previously we used an i32 constant to store the saturation width, but i32 isn't
legal on RISCV64. This wasn't a big deal to fix, but it is extra work for the
type legalizer.
This patch uses a VTSDNode to store the type similar to SEXT_INREG. This makes
it opaque to the type legalizer.
Reviewed By: nikic
Differential Revision: https://reviews.llvm.org/D101262
Previous build failures were caused by an error in bitcode reading and
writing for DIArgList metadata, which has been fixed in e5d844b587.
There were also some unnecessary asserts that were being triggered on
certain builds, which have been removed.
This reverts commit dad5caa59e.
When we pass a AArch64 Homogeneous Floating-Point
Aggregate (HFA) argument with increased alignment
requirements, for example
struct S {
__attribute__ ((__aligned__(16))) double v[4];
};
Clang uses `[4 x double]` for the parameter, which is passed
on the stack at alignment 8, whereas it should be at
alignment 16, following Rule C.4 in
AAPCS (https://github.com/ARM-software/abi-aa/blob/master/aapcs64/aapcs64.rst#642parameter-passing-rules)
Currently we don't have a way to express in LLVM IR the
alignment requirements of the function arguments. The align
attribute is applicable to pointers only, and only for some
special ways of passing arguments (e..g byval). When
implementing AAPCS32/AAPCS64, clang resorts to dubious hacks
of coercing to types, which naturally have the needed
alignment. We don't have enough types to cover all the
cases, though.
This patch introduces a new use of the stackalign attribute
to control stack slot alignment, when and if an argument is
passed in memory.
The attribute align is left as an optimizer hint - it still
applies to pointer types only and pertains to the content of
the pointer, whereas the alignment of the pointer itself is
determined by the stackalign attribute.
For byval arguments, the stackalign attribute assumes the
role, previously perfomed by align, falling back to align if
stackalign` is absent.
On the clang side, when passing arguments using the "direct"
style (cf. `ABIArgInfo::Kind`), now we can optionally
specify an alignment, which is emitted as the new
`stackalign` attribute.
Patch by Momchil Velikov and Lucas Prates.
Differential Revision: https://reviews.llvm.org/D98794
During SelectionDAG, we must track the SDNodes that each SDDbgValue depends on
to compute its value. These are ultimately derived from the location operands to
the SDDbgValue, but were stored in a separate vector prior to this patch. This
resulted in cases where one of the lists was updated incorrectly, resulting in
crashes during compilation. This patch fixes the issue by directly recomputing
the dependency list from the SDDbgOperands in getDependencies().
Differential Revision: https://reviews.llvm.org/D99423
This patch adds a new llvm.experimental.stepvector intrinsic,
which takes no arguments and returns a linear integer sequence of
values of the form <0, 1, ...>. It is primarily intended for
scalable vectors, although it will work for fixed width vectors
too. It is intended that later patches will make use of this
new intrinsic when vectorising induction variables, currently only
supported for fixed width. I've added a new CreateStepVector
method to the IRBuilder, which will generate a call to this
intrinsic for scalable vectors and fall back on creating a
ConstantVector for fixed width.
For scalable vectors this intrinsic is lowered to a new ISD node
called STEP_VECTOR, which takes a single constant integer argument
as the step. During lowering this argument is set to a value of 1.
The reason for this additional argument at the codegen level is
because in future patches we will introduce various generic DAG
combines such as
mul step_vector(1), 2 -> step_vector(2)
add step_vector(1), step_vector(1) -> step_vector(2)
shl step_vector(1), 1 -> step_vector(2)
etc.
that encourage a canonical format for all targets. This hopefully
means all other targets supporting scalable vectors can benefit
from this too.
I've added cost model tests for both fixed width and scalable
vectors:
llvm/test/Analysis/CostModel/AArch64/neon-stepvector.ll
llvm/test/Analysis/CostModel/AArch64/sve-stepvector.ll
as well as codegen lowering tests for fixed width and scalable
vectors:
llvm/test/CodeGen/AArch64/neon-stepvector.ll
llvm/test/CodeGen/AArch64/sve-stepvector.ll
See this thread for discussion of the intrinsic:
https://lists.llvm.org/pipermail/llvm-dev/2021-January/147943.html
Fixed section of code that iterated through a SmallDenseMap and added
instructions in each iteration, causing non-deterministic code; replaced
SmallDenseMap with MapVector to prevent non-determinism.
This reverts commit 01ac6d1587.
This caused non-deterministic compiler output; see comment on the
code review.
> This patch updates the various IR passes to correctly handle dbg.values with a
> DIArgList location. This patch does not actually allow DIArgLists to be produced
> by salvageDebugInfo, and it does not affect any pass after codegen-prepare.
> Other than that, it should cover every IR pass.
>
> Most of the changes simply extend code that operated on a single debug value to
> operate on the list of debug values in the style of any_of, all_of, for_each,
> etc. Instances of setOperand(0, ...) have been replaced with with
> replaceVariableLocationOp, which takes the value that is being replaced as an
> additional argument. In places where this value isn't readily available, we have
> to track the old value through to the point where it gets replaced.
>
> Differential Revision: https://reviews.llvm.org/D88232
This reverts commit df69c69427.
Use a more general strategy when splitting a vector into scalar parts (and vice-versa) to correctly handle vector types whose element size is not a power of 2 (and a multiple of 8).
Reviewed By: atanasyan
Differential Revision: https://reviews.llvm.org/D98273
This patch improves salvageDebugInfoImpl by allowing it to salvage arithmetic
operations with two or more non-const operands; this includes the GetElementPtr
instruction, and most Binary Operator instructions. These salvages produce
DIArgList locations and are only valid for dbg.values, as currently variadic
DIExpressions must use DW_OP_stack_value. This functionality is also only added
for salvageDebugInfoForDbgValues; other functions that directly call
salvageDebugInfoImpl (such as in ISel or Coroutine frame building) can be
updated in a later patch.
Differential Revision: https://reviews.llvm.org/D91722
This patch updates the various IR passes to correctly handle dbg.values with a
DIArgList location. This patch does not actually allow DIArgLists to be produced
by salvageDebugInfo, and it does not affect any pass after codegen-prepare.
Other than that, it should cover every IR pass.
Most of the changes simply extend code that operated on a single debug value to
operate on the list of debug values in the style of any_of, all_of, for_each,
etc. Instances of setOperand(0, ...) have been replaced with with
replaceVariableLocationOp, which takes the value that is being replaced as an
additional argument. In places where this value isn't readily available, we have
to track the old value through to the point where it gets replaced.
Differential Revision: https://reviews.llvm.org/D88232
This patch introduces a new intrinsic @llvm.experimental.vector.splice
that constructs a vector of the same type as the two input vectors,
based on a immediate where the sign of the immediate distinguishes two
variants. A positive immediate specifies an index into the first vector
and a negative immediate specifies the number of trailing elements to
extract from the first vector.
For example:
@llvm.experimental.vector.splice(<A,B,C,D>, <E,F,G,H>, 1) ==> <B, C, D, E> ; index
@llvm.experimental.vector.splice(<A,B,C,D>, <E,F,G,H>, -3) ==> <B, C, D, E> ; trailing element count
These intrinsics support both fixed and scalable vectors, where the
former is lowered to a shufflevector to maintain existing behaviour,
although while marked as experimental the recommended way to express
this operation for fixed-width vectors is to use shufflevector. For
scalable vectors where it is not possible to express a shufflevector
mask for this operation, a new ISD node has been implemented.
This is one of the named shufflevector intrinsics proposed on the
mailing-list in the RFC at [1].
Patch by Paul Walker and Cullen Rhodes.
[1] https://lists.llvm.org/pipermail/llvm-dev/2020-November/146864.html
Reviewed By: sdesmalen
Differential Revision: https://reviews.llvm.org/D94708
This patch adds partial support in Instruction Selection for dbg.values that use
a DIArgList. This patch does not add support for producing DBG_VALUE_LIST, but
adds the logic for processing DIArgLists within the ISel pass. This change is
largely focused on handleDebugValue and some of the functions that it calls.
Outside of this, salvageDebugInfo and transferDbgValues have been modified to
replace individual operands instead of the entire value; dangling debug info for
variadic debug values is not currently supported (but may be added later).
Differential Revision: https://reviews.llvm.org/D88589
This patch modifies the class that represents debug values during ISel,
SDDbgValue, to support multiple location operands (to represent a dbg.value that
uses a DIArgList). Part of this class's functionality has been split off into a
new class, SDDbgOperand.
The new class SDDbgOperand represents a single value, corresponding to an SSA
value or MachineOperand in the IR and MIR respectively. Members of SDDbgValue
that were previously related to that specific value (as opposed to the
variable or DIExpression), such as the Kind enum, have been moved to
SDDbgOperand. SDDbgValue now contains an array of SDDbgOperand instead, allowing
it to hold more than one of these values.
All changes outside SDDbgValue are simply updates to use the new interface.
Differential Revision: https://reviews.llvm.org/D88585
This patch updates DbgVariableIntrinsics to support use of a DIArgList for the
location operand, resulting in a significant change to its interface. This patch
does not update all IR passes to support multiple location operands in a
dbg.value; the only change is to update the DbgVariableIntrinsic interface and
its uses. All code outside of the intrinsic classes assumes that an intrinsic
will always have exactly one location operand; they will still support
DIArgLists, but only if they contain exactly one Value.
Among other changes, the setOperand and setArgOperand functions in
DbgVariableIntrinsic have been made private. This is to prevent code from
setting the operands of these intrinsics directly, which could easily result in
incorrect/invalid operands being set. This does not prevent these functions from
being called on a debug intrinsic at all, as they can still be called on any
CallInst pointer; it is assumed that any code directly setting the operands on a
generic call instruction is doing so safely. The intention for making these
functions private is to prevent DIArgLists from being overwritten by code that's
naively trying to replace one of the Values it points to, and also to fail fast
if a DbgVariableIntrinsic is updated to use a DIArgList without a valid
corresponding DIExpression.
explicitly emitting retainRV or claimRV calls in the IR
This reapplies ed4718eccb, which was reverted
because it was causing a miscompile. The bug that was causing the miscompile
has been fixed in 75805dce5f.
Original commit message:
Background:
This fixes a longstanding problem where llvm breaks ARC's autorelease
optimization (see the link below) by separating calls from the marker
instructions or retainRV/claimRV calls. The backend changes are in
https://reviews.llvm.org/D92569.
https://clang.llvm.org/docs/AutomaticReferenceCounting.html#arc-runtime-objc-autoreleasereturnvalue
What this patch does to fix the problem:
- The front-end adds operand bundle "clang.arc.attachedcall" to calls,
which indicates the call is implicitly followed by a marker
instruction and an implicit retainRV/claimRV call that consumes the
call result. In addition, it emits a call to
@llvm.objc.clang.arc.noop.use, which consumes the call result, to
prevent the middle-end passes from changing the return type of the
called function. This is currently done only when the target is arm64
and the optimization level is higher than -O0.
- ARC optimizer temporarily emits retainRV/claimRV calls after the calls
with the operand bundle in the IR and removes the inserted calls after
processing the function.
- ARC contract pass emits retainRV/claimRV calls after the call with the
operand bundle. It doesn't remove the operand bundle on the call since
the backend needs it to emit the marker instruction. The retainRV and
claimRV calls are emitted late in the pipeline to prevent optimization
passes from transforming the IR in a way that makes it harder for the
ARC middle-end passes to figure out the def-use relationship between
the call and the retainRV/claimRV calls (which is the cause of
PR31925).
- The function inliner removes an autoreleaseRV call in the callee if
nothing in the callee prevents it from being paired up with the
retainRV/claimRV call in the caller. It then inserts a release call if
claimRV is attached to the call since autoreleaseRV+claimRV is
equivalent to a release. If it cannot find an autoreleaseRV call, it
tries to transfer the operand bundle to a function call in the callee.
This is important since the ARC optimizer can remove the autoreleaseRV
returning the callee result, which makes it impossible to pair it up
with the retainRV/claimRV call in the caller. If that fails, it simply
emits a retain call in the IR if retainRV is attached to the call and
does nothing if claimRV is attached to it.
- SCCP refrains from replacing the return value of a call with a
constant value if the call has the operand bundle. This ensures the
call always has at least one user (the call to
@llvm.objc.clang.arc.noop.use).
- This patch also fixes a bug in replaceUsesOfNonProtoConstant where
multiple operand bundles of the same kind were being added to a call.
Future work:
- Use the operand bundle on x86-64.
- Fix the auto upgrader to convert call+retainRV/claimRV pairs into
calls with the operand bundles.
rdar://71443534
Differential Revision: https://reviews.llvm.org/D92808
This caused miscompiles of Chromium tests for iOS due clobbering of live
registers. See discussion on the code review for details.
> Background:
>
> This fixes a longstanding problem where llvm breaks ARC's autorelease
> optimization (see the link below) by separating calls from the marker
> instructions or retainRV/claimRV calls. The backend changes are in
> https://reviews.llvm.org/D92569.
>
> https://clang.llvm.org/docs/AutomaticReferenceCounting.html#arc-runtime-objc-autoreleasereturnvalue
>
> What this patch does to fix the problem:
>
> - The front-end adds operand bundle "clang.arc.attachedcall" to calls,
> which indicates the call is implicitly followed by a marker
> instruction and an implicit retainRV/claimRV call that consumes the
> call result. In addition, it emits a call to
> @llvm.objc.clang.arc.noop.use, which consumes the call result, to
> prevent the middle-end passes from changing the return type of the
> called function. This is currently done only when the target is arm64
> and the optimization level is higher than -O0.
>
> - ARC optimizer temporarily emits retainRV/claimRV calls after the calls
> with the operand bundle in the IR and removes the inserted calls after
> processing the function.
>
> - ARC contract pass emits retainRV/claimRV calls after the call with the
> operand bundle. It doesn't remove the operand bundle on the call since
> the backend needs it to emit the marker instruction. The retainRV and
> claimRV calls are emitted late in the pipeline to prevent optimization
> passes from transforming the IR in a way that makes it harder for the
> ARC middle-end passes to figure out the def-use relationship between
> the call and the retainRV/claimRV calls (which is the cause of
> PR31925).
>
> - The function inliner removes an autoreleaseRV call in the callee if
> nothing in the callee prevents it from being paired up with the
> retainRV/claimRV call in the caller. It then inserts a release call if
> claimRV is attached to the call since autoreleaseRV+claimRV is
> equivalent to a release. If it cannot find an autoreleaseRV call, it
> tries to transfer the operand bundle to a function call in the callee.
> This is important since the ARC optimizer can remove the autoreleaseRV
> returning the callee result, which makes it impossible to pair it up
> with the retainRV/claimRV call in the caller. If that fails, it simply
> emits a retain call in the IR if retainRV is attached to the call and
> does nothing if claimRV is attached to it.
>
> - SCCP refrains from replacing the return value of a call with a
> constant value if the call has the operand bundle. This ensures the
> call always has at least one user (the call to
> @llvm.objc.clang.arc.noop.use).
>
> - This patch also fixes a bug in replaceUsesOfNonProtoConstant where
> multiple operand bundles of the same kind were being added to a call.
>
> Future work:
>
> - Use the operand bundle on x86-64.
>
> - Fix the auto upgrader to convert call+retainRV/claimRV pairs into
> calls with the operand bundles.
>
> rdar://71443534
>
> Differential Revision: https://reviews.llvm.org/D92808
This reverts commit ed4718eccb.
This patch addresses issues arising from the fact that the index type
used for subvector insertion/extraction is inconsistent between the
intrinsics and SDNodes. The intrinsic forms require i64 whereas the
SDNodes use the type returned by SelectionDAG::getVectorIdxTy.
Rather than update the intrinsic definitions to use an overloaded index
type, this patch fixes the issue by transforming the index to the
correct type as required. Any loss of index bits going from i64 to a
smaller type is unexpected, and will be caught by an assertion in
SelectionDAG::getVectorIdxConstant.
The patch also updates the documentation for INSERT_SUBVECTOR and adds
an assertion to its creation to bring it in line with EXTRACT_SUBVECTOR.
This necessitated changes to AArch64 which was using i64 for
EXTRACT_SUBVECTOR but i32 for INSERT_SUBVECTOR. Only one test changed
its codegen after updating the backend accordingly.
Reviewed By: sdesmalen
Differential Revision: https://reviews.llvm.org/D97459
This patch adds a new intrinsic experimental.vector.reduce that takes a single
vector and returns a vector of matching type but with the original lane order
reversed. For example:
```
vector.reverse(<A,B,C,D>) ==> <D,C,B,A>
```
The new intrinsic supports fixed and scalable vectors types.
The fixed-width vector relies on shufflevector to maintain existing behaviour.
Scalable vector uses the new ISD node - VECTOR_REVERSE.
This new intrinsic is one of the named shufflevector intrinsics proposed on the
mailing-list in the RFC at [1].
Patch by Paul Walker (@paulwalker-arm).
[1] https://lists.llvm.org/pipermail/llvm-dev/2020-November/146864.html
Differential Revision: https://reviews.llvm.org/D94883
In the future Windows will enable Control-flow Enforcement Technology (CET aka shadow stacks). To protect the path where the context is updated during exception handling, the binary is required to enumerate valid unwind entrypoints in a dedicated section which is validated when the context is being set during exception handling.
This change allows llvm to generate the section that contains the appropriate symbol references in the form expected by the msvc linker.
This feature is enabled through a new module flag, ehcontguard, which was modelled on the cfguard flag.
The change includes a test that when the module flag is enabled the section is correctly generated.
The set of exception continuation information includes returns from exceptional control flow (catchret in llvm).
In order to collect catchret we:
1) Includes an additional flag on machine basic blocks to indicate that the given block is the target of a catchret operation,
2) Introduces a new machine function pass to insert and collect symbols at the start of each block, and
3) Combines these targets with the other EHCont targets that were already being collected.
Change originally authored by Daniel Frampton <dframpto@microsoft.com>
For more details, see MSVC documentation for `/guard:ehcont`
https://docs.microsoft.com/en-us/cpp/build/reference/guard-enable-eh-continuation-metadata
Reviewed By: pengfei
Differential Revision: https://reviews.llvm.org/D94835
explicitly emitting retainRV or claimRV calls in the IR
Background:
This fixes a longstanding problem where llvm breaks ARC's autorelease
optimization (see the link below) by separating calls from the marker
instructions or retainRV/claimRV calls. The backend changes are in
https://reviews.llvm.org/D92569.
https://clang.llvm.org/docs/AutomaticReferenceCounting.html#arc-runtime-objc-autoreleasereturnvalue
What this patch does to fix the problem:
- The front-end adds operand bundle "clang.arc.attachedcall" to calls,
which indicates the call is implicitly followed by a marker
instruction and an implicit retainRV/claimRV call that consumes the
call result. In addition, it emits a call to
@llvm.objc.clang.arc.noop.use, which consumes the call result, to
prevent the middle-end passes from changing the return type of the
called function. This is currently done only when the target is arm64
and the optimization level is higher than -O0.
- ARC optimizer temporarily emits retainRV/claimRV calls after the calls
with the operand bundle in the IR and removes the inserted calls after
processing the function.
- ARC contract pass emits retainRV/claimRV calls after the call with the
operand bundle. It doesn't remove the operand bundle on the call since
the backend needs it to emit the marker instruction. The retainRV and
claimRV calls are emitted late in the pipeline to prevent optimization
passes from transforming the IR in a way that makes it harder for the
ARC middle-end passes to figure out the def-use relationship between
the call and the retainRV/claimRV calls (which is the cause of
PR31925).
- The function inliner removes an autoreleaseRV call in the callee if
nothing in the callee prevents it from being paired up with the
retainRV/claimRV call in the caller. It then inserts a release call if
claimRV is attached to the call since autoreleaseRV+claimRV is
equivalent to a release. If it cannot find an autoreleaseRV call, it
tries to transfer the operand bundle to a function call in the callee.
This is important since the ARC optimizer can remove the autoreleaseRV
returning the callee result, which makes it impossible to pair it up
with the retainRV/claimRV call in the caller. If that fails, it simply
emits a retain call in the IR if retainRV is attached to the call and
does nothing if claimRV is attached to it.
- SCCP refrains from replacing the return value of a call with a
constant value if the call has the operand bundle. This ensures the
call always has at least one user (the call to
@llvm.objc.clang.arc.noop.use).
- This patch also fixes a bug in replaceUsesOfNonProtoConstant where
multiple operand bundles of the same kind were being added to a call.
Future work:
- Use the operand bundle on x86-64.
- Fix the auto upgrader to convert call+retainRV/claimRV pairs into
calls with the operand bundles.
rdar://71443534
Differential Revision: https://reviews.llvm.org/D92808
As for SETCC, use a less expensive condition code when generating
STRICT_FSETCC if the node is known not to have Nan.
Reviewed By: SjoerdMeijer
Differential Revision: https://reviews.llvm.org/D91972
This commit moves a line in SelectionDAGBuilder::handleDebugValue to
avoid implicitly casting a TypeSize object to an unsigned earlier than
necessary. It was possible that we bail out of the loop before the value
is ever used, which means we could create a superfluous TypeSize
warning.
Reviewed By: DavidTruby
Differential Revision: https://reviews.llvm.org/D96423
The IR/MIR pseudo probe intrinsics don't get materialized into real machine instructions and therefore they don't incur runtime cost directly. However, they come with indirect cost by blocking certain optimizations. Some of the blocking are intentional (such as blocking code merge) for better counts quality while the others are accidental. This change unblocks perf-critical optimizations that do not affect counts quality. They include:
1. IR InstCombine, sinking load operation to shorten lifetimes.
2. MIR LiveRangeShrink, similar to #1
3. MIR TwoAddressInstructionPass, i.e, opeq transform
4. MIR function argument copy elision
5. IR stack protection. (though not perf-critical but nice to have).
Reviewed By: wmi
Differential Revision: https://reviews.llvm.org/D95982
As for SETCC, use a less expensive condition code when generating
STRICT_FSETCC if the node is known not to have Nan.
Reviewed By: SjoerdMeijer
Differential Revision: https://reviews.llvm.org/D91972
emitting retainRV or claimRV calls in the IR
This reapplies 3fe3946d9a without the
changes made to lib/IR/AutoUpgrade.cpp, which was violating layering.
Original commit message:
Background:
This patch makes changes to the front-end and middle-end that are
needed to fix a longstanding problem where llvm breaks ARC's autorelease
optimization (see the link below) by separating calls from the marker
instructions or retainRV/claimRV calls. The backend changes are in
https://reviews.llvm.org/D92569.
https://clang.llvm.org/docs/AutomaticReferenceCounting.html#arc-runtime-objc-autoreleasereturnvalue
What this patch does to fix the problem:
- The front-end adds operand bundle "clang.arc.rv" to calls, which
indicates the call is implicitly followed by a marker instruction and
an implicit retainRV/claimRV call that consumes the call result. In
addition, it emits a call to @llvm.objc.clang.arc.noop.use, which
consumes the call result, to prevent the middle-end passes from changing
the return type of the called function. This is currently done only when
the target is arm64 and the optimization level is higher than -O0.
- ARC optimizer temporarily emits retainRV/claimRV calls after the calls
with the operand bundle in the IR and removes the inserted calls after
processing the function.
- ARC contract pass emits retainRV/claimRV calls after the call with the
operand bundle. It doesn't remove the operand bundle on the call since
the backend needs it to emit the marker instruction. The retainRV and
claimRV calls are emitted late in the pipeline to prevent optimization
passes from transforming the IR in a way that makes it harder for the
ARC middle-end passes to figure out the def-use relationship between
the call and the retainRV/claimRV calls (which is the cause of
PR31925).
- The function inliner removes an autoreleaseRV call in the callee if
nothing in the callee prevents it from being paired up with the
retainRV/claimRV call in the caller. It then inserts a release call if
the call is annotated with claimRV since autoreleaseRV+claimRV is
equivalent to a release. If it cannot find an autoreleaseRV call, it
tries to transfer the operand bundle to a function call in the callee.
This is important since ARC optimizer can remove the autoreleaseRV
returning the callee result, which makes it impossible to pair it up
with the retainRV/claimRV call in the caller. If that fails, it simply
emits a retain call in the IR if the implicit call is a call to
retainRV and does nothing if it's a call to claimRV.
Future work:
- Use the operand bundle on x86-64.
- Fix the auto upgrader to convert call+retainRV/claimRV pairs into
calls annotated with the operand bundles.
rdar://71443534
Differential Revision: https://reviews.llvm.org/D92808
emitting retainRV or claimRV calls in the IR
Background:
This patch makes changes to the front-end and middle-end that are
needed to fix a longstanding problem where llvm breaks ARC's autorelease
optimization (see the link below) by separating calls from the marker
instructions or retainRV/claimRV calls. The backend changes are in
https://reviews.llvm.org/D92569.
https://clang.llvm.org/docs/AutomaticReferenceCounting.html#arc-runtime-objc-autoreleasereturnvalue
What this patch does to fix the problem:
- The front-end adds operand bundle "clang.arc.rv" to calls, which
indicates the call is implicitly followed by a marker instruction and
an implicit retainRV/claimRV call that consumes the call result. In
addition, it emits a call to @llvm.objc.clang.arc.noop.use, which
consumes the call result, to prevent the middle-end passes from changing
the return type of the called function. This is currently done only when
the target is arm64 and the optimization level is higher than -O0.
- ARC optimizer temporarily emits retainRV/claimRV calls after the calls
with the operand bundle in the IR and removes the inserted calls after
processing the function.
- ARC contract pass emits retainRV/claimRV calls after the call with the
operand bundle. It doesn't remove the operand bundle on the call since
the backend needs it to emit the marker instruction. The retainRV and
claimRV calls are emitted late in the pipeline to prevent optimization
passes from transforming the IR in a way that makes it harder for the
ARC middle-end passes to figure out the def-use relationship between
the call and the retainRV/claimRV calls (which is the cause of
PR31925).
- The function inliner removes an autoreleaseRV call in the callee if
nothing in the callee prevents it from being paired up with the
retainRV/claimRV call in the caller. It then inserts a release call if
the call is annotated with claimRV since autoreleaseRV+claimRV is
equivalent to a release. If it cannot find an autoreleaseRV call, it
tries to transfer the operand bundle to a function call in the callee.
This is important since ARC optimizer can remove the autoreleaseRV
returning the callee result, which makes it impossible to pair it up
with the retainRV/claimRV call in the caller. If that fails, it simply
emits a retain call in the IR if the implicit call is a call to
retainRV and does nothing if it's a call to claimRV.
Future work:
- Use the operand bundle on x86-64.
- Fix the auto upgrader to convert call+retainRV/claimRV pairs into
calls annotated with the operand bundles.
rdar://71443534
Differential Revision: https://reviews.llvm.org/D92808
The AArch64 DAG combine added by D90945 & D91433 extends the index
of a scalable masked gather or scatter to i32 if necessary.
This patch removes the combine and instead adds shouldExtendGSIndex, which
is used by visitMaskedGather/Scatter in SelectionDAGBuilder to query whether
the index should be extended before calling getMaskedGather/Scatter.
Reviewed By: david-arm
Differential Revision: https://reviews.llvm.org/D94525
To set non-default rounding mode user usually calls function 'fesetround'
from standard C library. This way has some disadvantages.
* It creates unnecessary dependency on libc. On the other hand, setting
rounding mode requires few instructions and could be made by compiler.
Sometimes standard C library even is not available, like in the case of
GPU or AI cores that execute small kernels.
* Compiler could generate more effective code if it knows that a particular
call just sets rounding mode.
This change introduces new IR intrinsic, namely 'llvm.set.rounding', which
sets current rounding mode, similar to 'fesetround'. It however differs
from the latter, because it is a lower level facility:
* 'llvm.set.rounding' does not return any value, whereas 'fesetround'
returns non-zero value in the case of failure. In glibc 'fesetround'
reports failure if its argument is invalid or unsupported or if floating
point operations are unavailable on the hardware. Compiler usually knows
what core it generates code for and it can validate arguments in many
cases.
* Rounding mode is specified in 'fesetround' using constants like
'FE_TONEAREST', which are target dependent. It is inconvenient to work
with such constants at IR level.
C standard provides a target-independent way to specify rounding mode, it
is used in FLT_ROUNDS, however it does not define standard way to set
rounding mode using this encoding.
This change implements only IR intrinsic. Lowering it to machine code is
target-specific and will be implemented latter. Mapping of 'fesetround'
to 'llvm.set.rounding' is also not implemented here.
Differential Revision: https://reviews.llvm.org/D74729
This recommits 2c51bef76c.
I've fixed the broken check line from when I renamed the test function.
Original commit message:
This builds on D94142 where scalable vectors are allowed in structs.
I did have to fix one scalable vector issue in the vector type
creation for these intrinsics where we used getVectorNumElements
instead of ElementCount.
This builds on D94142 where scalable vectors are allowed in structs.
I did have to fix one scalable vector issue in the vector type
creation for these intrinsics where we used getVectorNumElements
instead of ElementCount.
Differential Revision: https://reviews.llvm.org/D94149
The ``llvm.experimental.noalias.scope.decl`` intrinsic identifies where a noalias
scope is declared. When the intrinsic is duplicated, a decision must
also be made about the scope: depending on the reason of the duplication,
the scope might need to be duplicated as well.
Reviewed By: nikic, jdoerfert
Differential Revision: https://reviews.llvm.org/D93039
This implements basic instructions for the new spec.
- Adds new versions of instructions: `catch`, `catch_all`, and `rethrow`
- Adds support for instruction selection for the new instructions
- `catch` needs a custom routine for the same reason `throw` needs one,
to encode `__cpp_exception` tag symbol.
- Updates `WebAssembly::isCatch` utility function to include `catch_all`
and Change code that compares an instruction's opcode with `catch` to
use that function.
- LateEHPrepare
- Previously in LateEHPrepare we added `catch` instruction to both
`catchpad`s (for user catches) and `cleanuppad`s (for destructors).
In the new version `catch` is generated from `llvm.catch` intrinsic
in instruction selection phase, so we only need to add `catch_all`
to the beginning of cleanup pads.
- `catch` is generated from instruction selection, but we need to
hoist the `catch` instruction to the beginning of every EH pad,
because `catch` can be in the middle of the EH pad or even in a
split BB from it after various code transformations.
- Removes `addExceptionExtraction` function, which was used to
generate `br_on_exn` before.
- CFGStackfiy: Deletes `fixUnwindMismatches` function. Running this
function on the new instruction causes crashes, and the new version
will be added in a later CL, whose contents will be completely
different. So deleting the whole function will make the diff easier to
read.
- Reenables all disabled tests in exception.ll and eh-lsda.ll and a
single basic test in cfg-stackify-eh.ll.
- Updates existing tests to use the new assembly format. And deletes
`br_on_exn` instructions from the tests and FileCheck lines.
Reviewed By: dschuff, tlively
Differential Revision: https://reviews.llvm.org/D94040
`wasm_rethrow_in_catch` intrinsic and builtin are used in order to
rethrow an exception when the exception is caught but there is no
matching clause within the current `catch`. For example,
```
try {
foo();
} catch (int n) {
...
}
```
If the caught exception does not correspond to C++ `int` type, it should
be rethrown. These intrinsic/builtin were renamed `rethrow_in_catch`
because at the time I thought there would be another intrinsic for C++'s
`throw` keyword, which rethrows an exception. It turned out that `throw`
keyword doesn't require wasm's `rethrow` instruction, so we rename
`rethrow_in_catch` to just `rethrow` here.
Reviewed By: dschuff, tlively
Differential Revision: https://reviews.llvm.org/D94038
Recently a few patches are made to move towards using select i1 instead of and/or i1 to represent "a && b"/"a || b" in C/C++.
"a && b" in C/C++ does not evaluate b if a is false whereas 'and a, b' in IR evaluates b and uses its result regardless of the result of a.
This is problematic because it can cause miscompilation if b was an erroneous operation (https://llvm.org/pr48353).
In C/C++, the result is simply false because b is not evaluated, but in IR the result is poison.
The discussion at D93065 has more context about this.
This patch makes two branch-splitting optimizations (one in SelectionDAGBuilder, one in CodeGenPrepare) recognize
select form of and/or as well using m_LogicalAnd/Or.
Since it is CodeGen, I think this is semantically ok (at least as safe as what codegen already did).
Reviewed By: nikic
Differential Revision: https://reviews.llvm.org/D93853
This patch adds support for the fptoui.sat and fptosi.sat intrinsics,
which provide basically the same functionality as the existing fptoui
and fptosi instructions, but will saturate (or return 0 for NaN) on
values unrepresentable in the target type, instead of returning
poison. Related mailing list discussion can be found at:
https://groups.google.com/d/msg/llvm-dev/cgDFaBmCnDQ/CZAIMj4IBAAJ
The intrinsics have overloaded source and result type and support
vector operands:
i32 @llvm.fptoui.sat.i32.f32(float %f)
i100 @llvm.fptoui.sat.i100.f64(double %f)
<4 x i32> @llvm.fptoui.sat.v4i32.v4f16(half %f)
// etc
On the SelectionDAG layer two new ISD opcodes are added,
FP_TO_UINT_SAT and FP_TO_SINT_SAT. These opcodes have two operands
and one result. The second operand is an integer constant specifying
the scalar saturation width. The idea here is that initially the
second operand and the scalar width of the result type are the same,
but they may change during type legalization. For example:
i19 @llvm.fptsi.sat.i19.f32(float %f)
// builds
i19 fp_to_sint_sat f, 19
// type legalizes (through integer result promotion)
i32 fp_to_sint_sat f, 19
I went for this approach, because saturated conversion does not
compose well. There is no good way of "adjusting" a saturating
conversion to i32 into one to i19 short of saturating twice.
Specifying the saturation width separately allows directly saturating
to the correct width.
There are two baseline expansions for the fp_to_xint_sat opcodes. If
the integer bounds can be exactly represented in the float type and
fminnum/fmaxnum are legal, we can expand to something like:
f = fmaxnum f, FP(MIN)
f = fminnum f, FP(MAX)
i = fptoxi f
i = select f uo f, 0, i # unnecessary if unsigned as 0 = MIN
If the bounds cannot be exactly represented, we expand to something
like this instead:
i = fptoxi f
i = select f ult FP(MIN), MIN, i
i = select f ogt FP(MAX), MAX, i
i = select f uo f, 0, i # unnecessary if unsigned as 0 = MIN
It should be noted that this expansion assumes a non-trapping fptoxi.
Initial tests are for AArch64, x86_64 and ARM. This exercises all of
the scalar and vector legalization. ARM is included to test float
softening.
Original patch by @nikic and @ebevhan (based on D54696).
Differential Revision: https://reviews.llvm.org/D54749
Currently the backend special cases x86_intrcc and treats the first
parameter as byval. Make the IR require byval for this parameter to
remove this special case, and avoid the dependence on the pointee
element type.
Fixes bug 46672.
I'm not sure the IR is enforcing all the calling convention
constraints. clang seems to ignore the attribute for empty parameter
lists, but the IR tolerates it.
Adds the ExtensionType flag, which reflects the LoadExtType of a MaskedGatherSDNode.
Also updated SelectionDAGDumper::print_details so that details of the gather
load (is signed, is scaled & extension type) are printed.
Reviewed By: sdesmalen
Differential Revision: https://reviews.llvm.org/D91084
This commit adds two new intrinsics.
- llvm.experimental.vector.insert: used to insert a vector into another
vector starting at a given index.
- llvm.experimental.vector.extract: used to extract a subvector from a
larger vector starting from a given index.
The codegen work for these intrinsics has already been completed; this
commit is simply exposing the existing ISD nodes to LLVM IR.
Reviewed By: cameron.mcinally
Differential Revision: https://reviews.llvm.org/D91362
Sometimes people get minimal crash reports after a UBSAN incident. This change
tags each trap with an integer representing the kind of failure encountered,
which can aid in tracking down the root cause of the problem.
Lowers the llvm.masked.gather intrinsics (scalar plus vector addressing mode only)
Changes in this patch:
- Add custom lowering for MGATHER, using getGatherVecOpcode() to choose the appropriate
gather load opcode to use.
- Improve codegen with refineIndexType/refineUniformBase, added in D90942
- Tests added for gather loads with 32 & 64-bit scaled & unscaled offsets.
Reviewed By: sdesmalen
Differential Revision: https://reviews.llvm.org/D91092
The mapping between registers and relative size has been updated to
use TypeSize to account for the size of scalable EVTs.
The patch is a NFCI, if not for the fact that with this change the
function `getUnderlyingArgRegs` does not raise a warning for implicit
conversion of `TypeSize` to `unsigned` when generating machine code
from the test added to the patch.
Reviewed By: arsenm
Differential Revision: https://reviews.llvm.org/D92096
Currently, we have some confusion in the codebase regarding the
meaning of LocationSize::unknown(): Some parts (including most of
BasicAA) assume that LocationSize::unknown() only allows accesses
after the base pointer. Some parts (various callers of AA) assume
that LocationSize::unknown() allows accesses both before and after
the base pointer (but within the underlying object).
This patch splits up LocationSize::unknown() into
LocationSize::afterPointer() and LocationSize::beforeOrAfterPointer()
to make this completely unambiguous. I tried my best to determine
which one is appropriate for all the existing uses.
The test changes in cs-cs.ll in particular illustrate a previously
clearly incorrect AA result: We were effectively assuming that
argmemonly functions were only allowed to access their arguments
after the passed pointer, but not before it. I'm pretty sure that
this was not intentional, and it's certainly not specified by
LangRef that way.
Differential Revision: https://reviews.llvm.org/D91649
We currently don't match this which limits the effectiveness of D91120 until
InstCombine starts canonicalizing to llvm.abs. This should be easy to remove
if/when we remove the SPF_ABS handling.
Differential Revision: https://reviews.llvm.org/D92118
This change introduces a MIR target-independent pseudo instruction corresponding to the IR intrinsic llvm.pseudoprobe for pseudo-probe block instrumentation. Please refer to https://reviews.llvm.org/D86193 for the whole story.
An `llvm.pseudoprobe` intrinsic call will be lowered into a target-independent operation named `PSEUDO_PROBE`. Given the following instrumented IR,
```
define internal void @foo2(i32 %x, void (i32)* %f) !dbg !4 {
bb0:
%cmp = icmp eq i32 %x, 0
call void @llvm.pseudoprobe(i64 837061429793323041, i64 1)
br i1 %cmp, label %bb1, label %bb2
bb1:
call void @llvm.pseudoprobe(i64 837061429793323041, i64 2)
br label %bb3
bb2:
call void @llvm.pseudoprobe(i64 837061429793323041, i64 3)
br label %bb3
bb3:
call void @llvm.pseudoprobe(i64 837061429793323041, i64 4)
ret void
}
```
the corresponding MIR is shown below. Note that block `bb3` is duplicated into `bb1` and `bb2` where its probe is duplicated too. This allows for an accurate execution count to be collected for `bb3`, which is basically the sum of the counts of `bb1` and `bb2`.
```
bb.0.bb0:
frame-setup PUSH64r undef $rax, implicit-def $rsp, implicit $rsp
TEST32rr killed renamable $edi, renamable $edi, implicit-def $eflags
PSEUDO_PROBE 837061429793323041, 1, 0
$edi = MOV32ri 1, debug-location !13; test.c:0
JCC_1 %bb.1, 4, implicit $eflags
bb.2.bb2:
PSEUDO_PROBE 837061429793323041, 3, 0
PSEUDO_PROBE 837061429793323041, 4, 0
$rax = frame-destroy POP64r implicit-def $rsp, implicit $rsp
RETQ
bb.1.bb1:
PSEUDO_PROBE 837061429793323041, 2, 0
PSEUDO_PROBE 837061429793323041, 4, 0
$rax = frame-destroy POP64r implicit-def $rsp, implicit $rsp
RETQ
```
The target op PSEUDO_PROBE will be converted into a piece of binary data by the object emitter with no machine instructions generated. This is done in a different patch.
Reviewed By: wmi
Differential Revision: https://reviews.llvm.org/D86495
The default version only works if the returned node has a single
result. The X86 and PowerPC versions support multiple results
and allow a single result to be returned from a node with
multiple outputs. And allow a single result that is not result 0
of the node.
Also replace the Mips version since the new version should work
for it. The original version handled multiple results, but only
if the new node and original node had the same number of results.
Differential Revision: https://reviews.llvm.org/D91846
When constructing a MemoryLocation by hand, require that a
LocationSize is explicitly specified. D91649 will split up
LocationSize::unknown() into two different states, and callers
should make an explicit choice regarding the kind of MemoryLocation
they want to have.
The `dso_local_equivalent` constant is a wrapper for functions that represents a
value which is functionally equivalent to the global passed to this. That is, if
this accepts a function, calling this constant should have the same effects as
calling the function directly. This could be a direct reference to the function,
the `@plt` modifier on X86/AArch64, a thunk, or anything that's equivalent to the
resolved function as a call target.
When lowered, the returned address must have a constant offset at link time from
some other symbol defined within the same binary. The address of this value is
also insignificant. The name is leveraged from `dso_local` where use of a function
or variable is resolved to a symbol in the same linkage unit.
In this patch:
- Addition of `dso_local_equivalent` and handling it
- Update Constant::needsRelocation() to strip constant inbound GEPs and take
advantage of `dso_local_equivalent` for relative references
This is useful for the [Relative VTables C++ ABI](https://reviews.llvm.org/D72959)
which makes vtables readonly. This works by replacing the dynamic relocations for
function pointers in them with static relocations that represent the offset between
the vtable and virtual functions. If a function is externally defined,
`dso_local_equivalent` can be used as a generic wrapper for the function to still
allow for this static offset calculation to be done.
See [RFC](http://lists.llvm.org/pipermail/llvm-dev/2020-August/144469.html) for more details.
Differential Revision: https://reviews.llvm.org/D77248
In some cases, the values passed to `asm sideeffect` calls cannot be
mapped directly to simple MVTs. Currently, we crash in the backend if
that happens. An example can be found in the @test_vector_too_large_r_m
test case, where we pass <9 x float> vectors. In practice, this can
happen in cases like the simple C example below.
using vec = float __attribute__((ext_vector_type(9)));
void f1 (vec m) {
asm volatile("" : "+r,m"(m) : : "memory");
}
One case that use "+r,m" constraints for arbitrary data types in
practice is google-benchmark's DoNotOptimize.
This patch updates visitInlineAsm so that it use MVT::Other for
constraints with complex VTs. It looks like the rest of the backend
correctly deals with that and properly legalizes the type.
And we still report an error if there are no registers to satisfy the
constraint.
Reviewed By: arsenm
Differential Revision: https://reviews.llvm.org/D91710
Lowers the llvm.masked.scatter intrinsics (scalar plus vector addressing mode only)
Changes included in this patch:
- Custom lowering for MSCATTER, which chooses the appropriate scatter store opcode to use.
Floating-point scatters are cast to integer, with patterns added to match FP reinterpret_casts.
- Added the getCanonicalIndexType function to convert redundant addressing
modes (e.g. scaling is redundant when accessing bytes)
- Tests with 32 & 64-bit scaled & unscaled offsets
Reviewed By: sdesmalen
Differential Revision: https://reviews.llvm.org/D90941
This patch adds the IsTruncatingStore flag to MaskedScatterSDNode, set by getMaskedScatter().
Updated SelectionDAGDumper::print_details for MaskedScatterSDNode to print
the details of masked scatters (is truncating, signed or scaled).
This is the first in a series of patches which adds support for scalable masked scatters
Reviewed By: sdesmalen
Differential Revision: https://reviews.llvm.org/D90939
In certain places in llvm/lib/CodeGen we were relying upon the TypeSize
comparison operators when in fact the code was only ever expecting
either scalar values or fixed width vectors. I've changed some of these
places to use the equivalent scalar operator.
Differential Revision: https://reviews.llvm.org/D88482
In certain places in the code we can never end up in a situation where
we're mixing fixed width and scalable vector types. For example,
we can't have truncations and extends that change the lane count. Also,
in other places such as GenWidenVectorStores and GenWidenVectorLoads we
know from the behaviour of FindMemType that we can never choose a vector
type with a different scalable property.
In various places I have used EVT::bitsXY functions instead of
TypeSize::isKnownXY, where it probably makes sense to keep an assert
that scalable properties match.
Differential Revision: https://reviews.llvm.org/D88654
The STRICT was causing unnecessary confusion. I think SEQ is a more accurate
name for what they actually do, and the other obvious option of "ORDERED"
has the issue of already having a meaning in FP contexts.
Differential Revision: https://reviews.llvm.org/D88791
getNode handling for ISD:SETCC calls FoldSETCC which can canonicalize
FP constants to the RHS. When this happens we should create the node
with the FMF that was requested. By using FlagInserter when can ensure
any calls to getNode/getSetcc during canonicalization will also get the flags.
Differential Revision: https://reviews.llvm.org/D88063
When processing PHI nodes after a callbr, we need to make sure that the
PHI nodes on the default branch are resolved after the callbr
(inserted after INLINEASM_BR). The PHI node values on the indirect
branches are processed before the INLINEASM_BR.
Differential Revision: https://reviews.llvm.org/D86260
SelectionDAGBuilder was inconsistently mangling values based on ABI
Calling Conventions when getting them through copyFromRegs in
SelectionDAGBuilder, causing duplicate value type convertions for
function arguments. The checking for the mangling requirement was based
on the value's originating instruction and was performed outside of, and
inspite of, the regular Calling Convention Lowering.
The issue could be observed in a scenario such as:
```
%arg1 = load half, half* %const, align 2
%arg2 = call fastcc half @someFunc()
call fastcc void @otherFunc(half %arg1, half %arg2)
; Here, %arg2 was incorrectly mangled twice, as the CallConv data from
; the call to @someFunc() was taken into consideration for the check
; when getting the value for processing the call to @otherFunc(...),
; after the proper convertion had taken place when lowering the return
; value of the first call.
```
This patch fixes the issue by disregarding the Calling Convention
information for such copyFromRegs, making sure the ABI mangling is
properly contanined in the Calling Convention Lowering.
This fixes Bugzilla #47454.
Reviewed By: efriedma
Differential Revision: https://reviews.llvm.org/D87844
The versions that take 'unsigned' will be removed in the future.
I tried to use getOriginalAlign instead of getAlign in some
places. getAlign factors in the minimum alignment implied by
the offset in the pointer info. Since we're also passing the
pointer info we can use the original alignment.
Reviewed By: arsenm
Differential Revision: https://reviews.llvm.org/D87592
This removes the after the fact FMF handling from D46854 in favor of passing fast math flags to getNode. This should be a superset of D87130.
This required adding a SDNodeFlags to SelectionDAG::getSetCC.
Now we manage to contant fold some stuff undefs during the
initial getNode that we don't do in later DAG combines.
Differential Revision: https://reviews.llvm.org/D87200
Previously SDNodeFlags::instersectWith(Flags) would do nothing if Flags was
in an undefined state, which is very bad given that this is the default when
getNode() is called without passing an explicit SDNodeFlags argument.
This meant that if an already existing and reused node had a flag which the
second caller to getNode() did not set, that flag would remain uncleared.
This was exposed by https://bugs.llvm.org/show_bug.cgi?id=47092, where an NSW
flag was incorrectly set on an add instruction (which did in fact overflow in
one of the two original contexts), so when SystemZElimCompare removed the
compare with 0 trusting that flag, wrong-code resulted.
There is more that needs to be done in this area as discussed here:
Differential Revision: https://reviews.llvm.org/D86871
Review: Ulrich Weigand, Sanjay Patel
This patch changes ElementCount so that the Min and Scalable
members are now private and can only be accessed via the get
functions getKnownMinValue() and isScalable(). In addition I've
added some other member functions for more commonly used operations.
Hopefully this makes the class more useful and will reduce the
need for calling getKnownMinValue().
Differential Revision: https://reviews.llvm.org/D86065
When joining the legal parts of vector arguments into its original value
during the lower of Formal Arguments in SelectionDAGBuilder, the Calling
Convention information was not being propagated for the handling of each
individual parts. The same did not happen when lowering calls, causing a
mismatch.
This patch fixes the issue by properly propagating the Calling
Convention details.
This fixes Bugzilla #47001.
Reviewed By: arsenm
Differential Revision: https://reviews.llvm.org/D86715
This adapts legalization of intrinsic get.active.lane.mask to the new semantics
as described in D86147. Because the second argument is now the loop tripcount,
we legalize this intrinsic to an 'icmp ULT' instead of an ULE when it was the
backedge-taken count.
Differential Revision: https://reviews.llvm.org/D86302
In SelectionDAGBuilder always translate the fshl and fshr intrinsics to
FSHL and FSHR (or ROTL and ROTR) instead of lowering them to shifts and
ORs. Improve the legalization of FSHL and FSHR to avoid code quality
regressions.
Differential Revision: https://reviews.llvm.org/D77152
Changes the Offset arguments to both functions from int64_t to TypeSize
& updates all uses of the functions to create the offset using TypeSize::Fixed()
Reviewed By: efriedma
Differential Revision: https://reviews.llvm.org/D85220
The custom lowering saves an instruction over the generic expansion, by
taking advantage of the fact that PowerPC shift instructions are well
defined in the shift-by-bitwidth case.
Differential Revision: https://reviews.llvm.org/D83948
This patch stops unconditionally transforming FSUB(-0,X) into an FNEG(X) while building the DAG. There is also one small change to handle the new FSUB(-0,X) similarly to FNEG(X) in the AMDGPU backend.
Differential Revision: https://reviews.llvm.org/D84056
This fixes an assertion failure that was being triggered in
SelectionDAG::getZeroExtendInReg(), where it was trying to extend the <2xi32>
to i64 (which should have been <2xi64>).
Fixes: rdar://66016901
Differential Revision: https://reviews.llvm.org/D84884
This adds the llvm.abs(), llvm.umin(), llvm.umax(), llvm.smin(),
and llvm.smax() intrinsics specified in D81829. For SelectionDAG,
the ISD opcodes and all the legalization and lowering already exist,
so this just wires them up to the intrinsic in the SDAG builder and
adds rudimentary tests. For GlobalISel only the min/max intrinsics
are wired up, as llvm.abs() will require the addition of a G_ABS op,
and corresponding legalization support.
Differential Revision: https://reviews.llvm.org/D84125
When the byref attribute is added, there will need to be two similar
functions for the existing cases which have an associate value copy,
and byref which does not. Most, but not all of the existing uses will
use the existing version.
The associated size function added by D82679 also needs to
contextually differ, and will help eliminate a few places still
relying on pointee element types.
Some of the system registers readable on AArch64 and ARM platforms
return different values with each read (for example a timer counter),
these shouldn't be hoisted outside loops or otherwise interfered with,
but the normal @llvm.read_register intrinsic is only considered to read
memory.
This introduces a separate @llvm.read_volatile_register intrinsic and
maps all system-registers on ARM platforms to use it for the
__builtin_arm_rsr calls. Registers declared with asm("r9") or similar
are unaffected.
`__stack_chk_fail` does not return, but `unreachable` was not generated
following `call __stack_chk_fail`. This had a possibility to generate an
invalid binary for functions with a return type, because
`__stack_chk_fail`'s return type is void and `call __stack_chk_fail` can
be the last instruction in the function whose return type is non-void.
Generating `unreachable` after it makes sure CFGStackify's
`fixEndsAtEndOfFunction` handles it correctly.
Reviewed By: tlively
Differential Revision: https://reviews.llvm.org/D83277
This patch fixes all remaining warnings in:
llvm/test/CodeGen/AArch64/sve-trunc.ll
llvm/test/CodeGen/AArch64/sve-vector-splat.ll
I hit some warnings related to getCopyPartsToVector. I fixed two
issues:
1. In widenVectorToPartType() we assumed that we'd always be
using BUILD_VECTOR nodes to expand from one vector type to another,
which is incorrect for scalable vector types. I've fixed this for now
by simply bailing out immediately for scalable vectors.
2. In getCopyToPartsVector() I've changed the code to compare
the element counts of different types.
Differential Revision: https://reviews.llvm.org/D83028
SelectionDAGBuilder converts logic-of-compares into multiple branches based
on a boolean TLI setting in isJumpExpensive(). But that probably never
considered the pattern of extracted bools from a vector compare - it seems
unlikely that we would want to turn vector logic into control-flow.
The motivating x86 reduction case is shown in PR44565:
https://bugs.llvm.org/show_bug.cgi?id=44565
...and that test shows the expected improvement from using pmovmsk codegen.
For AArch64, I modified the test to include an extra op because the simpler
test gets transformed by a codegen invocation of SimplifyCFG.
Differential Revision: https://reviews.llvm.org/D82602
Whilst trying to assemble the following test:
clang/test/CodeGen/aarch64-sve-intrinsics/acle_sve_set2.c
I discovered we were hitting some warnings about possible invalid
calls to getVectorNumElements() in getCopyToPartsVector(). I've
tried to fix these by using ElementCount types where possible and
I've made the assumption that we don't support using a fixed width
vector to copy parts of a scalable vector, and vice versa. Looking
at how the copy is implemented I think that's the right thing for
now.
Differential Revision: https://reviews.llvm.org/D82744
Before this instruction supported output values, it fit fairly
naturally as a terminator. However, being a terminator while also
supporting outputs causes some trouble, as the physreg->vreg COPY
operations cannot be in the same block.
Modeling it as a non-terminator allows it to be handled the same way
as invoke is handled already.
Most of the changes here were created by auditing all the existing
users of MachineBasicBlock::isEHPad() and
MachineBasicBlock::hasEHPadSuccessor(), and adding calls to
isInlineAsmBrIndirectTarget or mayHaveInlineAsmBr, as appropriate.
Reviewed By: nickdesaulniers, void
Differential Revision: https://reviews.llvm.org/D79794
This lowers intrinsic @llvm.get.active.lane.mask to a setcc node, i.e. an icmp
ule, and creates vectors for its 2 arguments on which the comparison is
performed.
Differential Revision: https://reviews.llvm.org/D82292
Summary:
- AssertAlign node records the guaranteed alignment on its source node,
where these alignments are retrieved from alignment attributes in LLVM
IR. These tracked alignments could help DAG combining and lowering
generating efficient code.
- In this patch, the basic support of AssertAlign node is added. So far,
we only generate AssertAlign nodes on return values from intrinsic
calls.
- Addressing selection in AMDGPU is revised accordingly to capture the
new (base + offset) patterns.
Reviewers: arsenm, bogner
Subscribers: jvesely, wdng, nhaehnle, tpr, hiraditya, kerbowa, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D81711
Summary:
Half-precision floating point arguments and returns are currently
promoted to either float or int32 in clang's CodeGen and there's
no existing support for the lowering of `half` arguments and returns
from IR in AArch32's backend.
Such frontend coercions, implemented as coercion through memory
in clang, can cause a series of issues in argument lowering, as causing
arguments to be stored on the wrong bits on big-endian architectures
and incurring in missing overflow detections in the return of certain
functions.
This patch introduces the handling of half-precision arguments and returns in
the backend using the actual "half" type on the IR. Using the "half"
type the backend is able to properly enforce the AAPCS' directions for
those arguments, making sure they are stored on the proper bits of the
registers and performing the necessary floating point convertions.
Reviewers: rjmccall, olista01, asl, efriedma, ostannard, SjoerdMeijer
Reviewed By: ostannard
Subscribers: stuij, hiraditya, dmgreen, llvm-commits, chill, dnsampaio, danielkiss, kristof.beyls, cfe-commits
Tags: #clang, #llvm
Differential Revision: https://reviews.llvm.org/D75169
Summary:
The naked function attribute is meant to suppress all function
prologue/epilogue instructions.
On ARM, some are still emitted if an argument greater than 64 bytes in size
(the threshold for using the byval attribute in IR) is passed partially
in registers.
Perform the check for Attribute::Naked and early exit in
SelectionDAGISel::LowerArguments().
Checking in ARMFrameLowering::determineCalleeSaves() is too late.
A test case is included.
Reviewers: llvm-commits, olista01, danielkiss
Reviewed By: danielkiss
Subscribers: kristof.beyls, hiraditya, danielkiss
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D80715
Change-Id: Icedecf2a4ad31bc3c35ab0df7489a9d346e1f7cc
Now that all of the statepoint related routines have classes with isa support, let's cleanup.
I'm leaving the (dead) utitilities in tree for a few days so that I can do the same cleanup downstream without breakage.
In the current statepoint design, we have four distinct groups of operands to the call: call args, gc transition args, deopt args, and gc args. This format prexisted the support in IR for operand bundles and was in fact one of the inspirations for the extension. However, we never went back and rearchitected statepoints to fully leverage bundles.
This change is the first in a small sequence to do so. All this does is extend the SelectionDAG lowering code to allow deopt and gc transition operands to be specified in either inline argument bundles or operand bundles.
Differential Revision: https://reviews.llvm.org/D8059
This intrinsic implements IEEE-754 operation roundToIntegralTiesToEven,
and performs rounding to the nearest integer value, rounding halfway
cases to even. The intrinsic represents the missed case of IEEE-754
rounding operations and now llvm provides full support of the rounding
operations defined by the standard.
Differential Revision: https://reviews.llvm.org/D75670
If the caller needs to reponsible for making sure the MaybeAlign
has a value, then we should just make the caller convert it to an Align
with operator*.
I explicitly deleted the relational comparison operators that
were being inherited from Optional. It's unclear what the meaning
of two MaybeAligns were one is defined and the other isn't
should be. So make the caller reponsible for defining the behavior.
I left the ==/!= operators from Optional. But now that exposed a
weird quirk that ==/!= between Align and MaybeAlign required the
MaybeAlign to be defined. But now we use the operator== from
Optional that takes an Optional and the Value.
Differential Revision: https://reviews.llvm.org/D80455
See https://reviews.llvm.org/D74651 for the preallocated IR constructs
and LangRef changes.
In X86TargetLowering::LowerCall(), if a call is preallocated, record
each argument's offset from the stack pointer and the total stack
adjustment. Associate the call Value with an integer index. Store the
info in X86MachineFunctionInfo with the integer index as the key.
This adds two new target independent ISDOpcodes and two new target
dependent Opcodes corresponding to @llvm.call.preallocated.{setup,arg}.
The setup ISelDAG node takes in a chain and outputs a chain and a
SrcValue of the preallocated call Value. It is lowered to a target
dependent node with the SrcValue replaced with the integer index key by
looking in X86MachineFunctionInfo. In
X86TargetLowering::EmitInstrWithCustomInserter() this is lowered to an
%esp adjustment, the exact amount determined by looking in
X86MachineFunctionInfo with the integer index key.
The arg ISelDAG node takes in a chain, a SrcValue of the preallocated
call Value, and the arg index int constant. It produces a chain and the
pointer fo the arg. It is lowered to a target dependent node with the
SrcValue replaced with the integer index key by looking in
X86MachineFunctionInfo. In
X86TargetLowering::EmitInstrWithCustomInserter() this is lowered to a
lea of the stack pointer plus an offset determined by looking in
X86MachineFunctionInfo with the integer index key.
Force any function containing a preallocated call to use the frame
pointer.
Does not yet handle a setup without a call, or a conditional call.
Does not yet handle musttail. That requires a LangRef change first.
Tried to look at all references to inalloca and see if they apply to
preallocated. I've made preallocated versions of tests testing inalloca
whenever possible and when they make sense (e.g. not alloca related,
inalloca edge cases).
Aside from the tests added here, I checked that this codegen produces
correct code for something like
```
struct A {
A();
A(A&&);
~A();
};
void bar() {
foo(foo(foo(foo(foo(A(), 4), 5), 6), 7), 8);
}
```
by replacing the inalloca version of the .ll file with the appropriate
preallocated code. Running the executable produces the same results as
using the current inalloca implementation.
Reverted due to unexpectedly passing tests, added REQUIRES: asserts for reland.
Subscribers: hiraditya, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D77689
See https://reviews.llvm.org/D74651 for the preallocated IR constructs
and LangRef changes.
In X86TargetLowering::LowerCall(), if a call is preallocated, record
each argument's offset from the stack pointer and the total stack
adjustment. Associate the call Value with an integer index. Store the
info in X86MachineFunctionInfo with the integer index as the key.
This adds two new target independent ISDOpcodes and two new target
dependent Opcodes corresponding to @llvm.call.preallocated.{setup,arg}.
The setup ISelDAG node takes in a chain and outputs a chain and a
SrcValue of the preallocated call Value. It is lowered to a target
dependent node with the SrcValue replaced with the integer index key by
looking in X86MachineFunctionInfo. In
X86TargetLowering::EmitInstrWithCustomInserter() this is lowered to an
%esp adjustment, the exact amount determined by looking in
X86MachineFunctionInfo with the integer index key.
The arg ISelDAG node takes in a chain, a SrcValue of the preallocated
call Value, and the arg index int constant. It produces a chain and the
pointer fo the arg. It is lowered to a target dependent node with the
SrcValue replaced with the integer index key by looking in
X86MachineFunctionInfo. In
X86TargetLowering::EmitInstrWithCustomInserter() this is lowered to a
lea of the stack pointer plus an offset determined by looking in
X86MachineFunctionInfo with the integer index key.
Force any function containing a preallocated call to use the frame
pointer.
Does not yet handle a setup without a call, or a conditional call.
Does not yet handle musttail. That requires a LangRef change first.
Tried to look at all references to inalloca and see if they apply to
preallocated. I've made preallocated versions of tests testing inalloca
whenever possible and when they make sense (e.g. not alloca related,
inalloca edge cases).
Aside from the tests added here, I checked that this codegen produces
correct code for something like
```
struct A {
A();
A(A&&);
~A();
};
void bar() {
foo(foo(foo(foo(foo(A(), 4), 5), 6), 7), 8);
}
```
by replacing the inalloca version of the .ll file with the appropriate
preallocated code. Running the executable produces the same results as
using the current inalloca implementation.
Subscribers: hiraditya, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D77689
Now that load/store alignment is required, we no longer need most
of them. Also switch the getLoadStoreAlignment() helper to return
Align instead of MaybeAlign.
Along the lines of D77454 and D79968. Unlike loads and stores, the
default alignment is getPrefTypeAlign, to match the existing handling in
various places, including SelectionDAG and InstCombine.
Differential Revision: https://reviews.llvm.org/D80044
This is D77454, except for stores. All the infrastructure work was done
for loads, so the remaining changes necessary are relatively small.
Differential Revision: https://reviews.llvm.org/D79968
The fact that loads and stores can have the alignment missing is a
constant source of confusion: code that usually works can break down in
rare cases. So fix the LoadInst API so the alignment is never missing.
To reduce the number of changes required to make this work, IRBuilder
and certain LoadInst constructors will grab the module's datalayout and
compute the alignment automatically. This is the same alignment
instcombine would eventually apply anyway; we're just doing it earlier.
There's a minor risk that the way we're retrieving the datalayout
could break out-of-tree code, but I don't think that's likely.
This is the last in a series of patches, so most of the necessary
changes have already been merged.
Differential Revision: https://reviews.llvm.org/D77454
Summary:
This patch handles illegal scalable types when lowering IR operations,
addressing several places where the value of isScalableVector() is
ignored.
For types such as <vscale x 8 x i32>, this means splitting the
operations. In this example, we would split it into two
operations of type <vscale x 4 x i32> for the low and high halves.
In cases such as <vscale x 2 x i32>, the elements in the vector
will be promoted. In this case they will be promoted to
i64 (with a vector of type <vscale x 2 x i64>)
Reviewers: sdesmalen, efriedma, huntergr
Reviewed By: efriedma
Subscribers: david-arm, tschuett, hiraditya, rkruppe, psnobl, cfe-commits, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D78812
We allocated a suitably aligned frame index so we know that all the values
have ABI alignment.
For MIPS this avoids using pair of lwl + lwr instructions instead of a
single lw. I found this when compiling CHERI pure capability code where
we can't use the lwl/lwr unaligned loads/stores and and were to falling
back to a byte load + shift + or sequence.
This should save a few instructions for MIPS and possibly other backends
that don't have fast unaligned loads/stores.
It also improves code generation for CodeGen/X86/pr34653.ll and
CodeGen/WebAssembly/offset.ll since they can now use aligned loads.
Reviewed By: efriedma
Differential Revision: https://reviews.llvm.org/D78999
This method has been commented as deprecated for a while. Remove
it and replace all uses with the equivalent getCalledOperand().
I also made a few cleanups in here. For example, to removes use
of getElementType on a pointer when we could just use getFunctionType
from the call.
Differential Revision: https://reviews.llvm.org/D78882
Summary:
When generating code for the LLVM IR zeroinitialiser operation, if
the vector type is scalable we should be using SPLAT_VECTOR instead
of BUILD_VECTOR.
Differential Revision: https://reviews.llvm.org/D78636
Using getValueType() is not correct for architectures extended with CHERI since
we need a pointer type and not the value that is loaded. While stack
protector is useless when you have CHERI (since CHERI provides much
stronger security guarantees), we still have a test to check that we can
generate correct code for checks. Merging b281138a1b
into our tree broke this test. Fix by using TLI.getFrameIndexTy().
Reviewed By: arsenm
Differential Revision: https://reviews.llvm.org/D77785
Summary:
Remove asserting vector getters from Type in preparation for the
VectorType refactor. The existence of these functions complicates the
refactor while adding little value.
Reviewers: dexonsmith, sdesmalen, efriedma
Reviewed By: efriedma
Subscribers: cfe-commits, hiraditya, llvm-commits
Tags: #llvm, #clang
Differential Revision: https://reviews.llvm.org/D77278
I've always found the "findValue" a little odd and
inconsistent with other things in SDB.
This simplfifies the code in SDB to just handle a splat constant
address or a 2 operand GEP in the same BB. This removes the
need for "findValue" since the operands to the GEP are
guaranteed to be available. The splat constant handling is
new, but was needed to avoid regressions due to constant
folding combining GEPs created in CGP.
CGP is now responsible for canonicalizing gather/scatters into
this form. The pattern I'm using for scalarizing, a scalar GEP
followed by a GEP with an all zeroes index, seems to be subject
to constant folding that the insertelement+shufflevector was not.
Differential Revision: https://reviews.llvm.org/D76947
The "Align" passed into getMachineMemOperand etc. is the alignment of
the MachinePointerInfo, not the alignment of the memory operation.
(getAlign() on a MachineMemOperand automatically reduces the alignment
to account for this.)
We were passing on wrong (overconservative) alignment in a bunch of
places. Fix a bunch of these, mostly in legalization. And while I'm
here, switch to the new Align APIs.
The test changes are all scheduling changes: the biggest effect of
preserving large alignments is that it improves alias analysis, so the
scheduler has more freedom.
(I was originally just trying to do a minor cleanup in
SelectionDAGBuilder, but I accidentally went deeper down the rabbit
hole.)
Differential Revision: https://reviews.llvm.org/D77687
Summary:
No error or warning is emitted when specific reserved registers are
written to in inline assembly. Therefore, writes to the program counter
or to the frame pointer, for instance, were permitted, which could have
led to undesirable behaviour.
Example:
int foo() {
register int a __asm__("r7"); // r7 = frame-pointer in M-class ARM
__asm__ __volatile__("mov %0, r1" : "=r"(a) : : );
return a;
}
In contrast, GCC issues an error in the same scenario.
This patch detects writes to specific reserved registers in inline
assembly for ARM and emits an error in such case. The detection works
for output and input operands. Clobber operands are not handled here:
they are already covered at a later point in
AsmPrinter::emitInlineAsm(const MachineInstr *MI). The registers
covered are: program counter, frame pointer and base pointer.
This is ARM only. Therefore the implementation of other targets'
counterparts remain open to do.
Reviewers: efriedma
Reviewed By: efriedma
Subscribers: kristof.beyls, hiraditya, danielkiss, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D76848
I only left it at the interface to ParseConstraints since that
needs updates to other callers in different files. I'll do that
as a follow up.
Differential Revision: https://reviews.llvm.org/D77892
Summary:
Remove usages of asserting vector getters in Type in preparation for the
VectorType refactor. The existence of these functions complicates the
refactor while adding little value.
Reviewers: stoklund, sdesmalen, efriedma
Reviewed By: sdesmalen
Subscribers: hiraditya, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D77272
These should not be assuming address space 0. Calling getPointerTy is
generally the wrong thing to do, since you should already know the
type from the incoming IR.
Summary:
A bug report mentioned that LLVM was producing jumps off the end of a
function when using "asm goto with outputs". Further digging pointed to
MachineBasicBlocks that had their address taken and were indirect
targets of INLINEASM_BR being removed by BranchFolder, because their
predecessor list was empty, so they appeared to have no entry.
This was a cascading failure caused earlier, during Pre-RA instruction
scheduling. We have a few special cases in Pre-RA instruction scheduling
where we split a MachineBasicBlock in two. This requires careful
handing of predecessor and successor lists for a MachineBasicBlock that
was split, and careful handing of PHI MachineInstrs that referred to the
MachineBasicBlock before it was split.
The clue that led to this fix was the observation that many callers of
MachineBasicBlock::splice() frequently call
MachineBasicBlock::transferSuccessorsAndUpdatePHIs() to update their PHI
nodes after a splice. We don't want to reuse that method, as we have
custom successor transferring logic for this block split.
This patch fixes 2 pre-existing bugs, and adds tests.
The first bug was that MachineBasicBlock::splice() correctly handles
updating most successors and predecessors; we don't need to do anything
more than removing the previous fallthrough block from the first half of
the split block post splice. Previously, we were updating the successor
list incorrectly (updating successors updates predecessors).
The second bug was that PHI nodes that needed registers from the first
half of the split block were not having entries populated. The register
live out information was correct, and the FuncInfo->PHINodesToUpdate was
correct. Specifically, the check in SelectionDAGISel::FinishBasicBlock:
for (unsigned i = 0, e = FuncInfo->PHINodesToUpdate.size(); i != e; ++i) {
MachineInstrBuilder PHI(*MF, FuncInfo->PHINodesToUpdate[i].first);
if (!FuncInfo->MBB->isSuccessor(PHI->getParent()))
continue;
PHI.addReg(FuncInfo->PHINodesToUpdate[i].second).addMBB(FuncInfo->MBB);
was `continue`ing because FuncInfo->MBB tracks the second half of
the post-split block; no one was updating PHI entries for the first half
of the post-split block.
SelectionDAGBuilder::UpdateSplitBlock() already expects to perform
special handling for MachineBasicBlocks that were split post calls to
ScheduleDAGSDNodes::EmitSchedule(), so I'm confident that it's both
correct for ScheduleDAGSDNodes::EmitSchedule() to return the second half
of the split block `CopyBB` which updates `FuncInfo->MBB` (ie. the
current MachineBasicBlock being processed), and perform special handling
for this in SelectionDAGBuilder::UpdateSplitBlock().
Reviewers: void, craig.topper, efriedma
Reviewed By: void, efriedma
Subscribers: hfinkel, fhahn, MatzeB, efriedma, hiraditya, llvm-commits, srhines
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D76961
The previous code used the type of the first field for the VT
passed to getNode for every field.
I've based the implementation here off what is done in visitSelect
as it removes the need to special case aggregates.
Differential Revision: https://reviews.llvm.org/D77093
Summary:
This is a roll forward of D77394 minus AlignmentFromAssumptions (which needs to be addressed separately)
Differences from D77394:
- DebugStr() now prints the alignment value or `None` and no more `Align(x)` or `MaybeAlign(x)`
- This is to keep Warning message consistent (CodeGen/SystemZ/alloca-04.ll)
- Removed a few unneeded headers from Alignment (since it's included everywhere it's better to keep the dependencies to a minimum)
Reviewers: courbet
Subscribers: sdardis, hiraditya, jrtc27, atanasyan, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D77537
Instead, represent the mask as out-of-line data in the instruction. This
should be more efficient in the places that currently use
getShuffleVector(), and paves the way for further changes to add new
shuffles for scalable vectors.
This doesn't change the syntax in textual IR. And I don't currently plan
to change the bitcode encoding in this patch, although we'll probably
need to do something once we extend shufflevector for scalable types.
I expect that once this is finished, we can then replace the raw "mask"
with something more appropriate for scalable vectors. Not sure exactly
what this looks like at the moment, but there are a few different ways
we could handle it. Maybe we could try to describe specific shuffles.
Or maybe we could define it in terms of a function to convert a fixed-length
array into an appropriate scalable vector, using a "step", or something
like that.
Differential Revision: https://reviews.llvm.org/D72467
Summary:
This change adds amdgcn.reloc.constant intrinsic to the amdgpu backend, which will compile into a relocation entry in the resulting elf.
The intrinsics takes a MetadataNode (String) as its only argument, which specifies the symbol name of the relocation entry.
`SelectionDAGBuilder::getValueImpl` is changed to allow metadata operands passed through to ISel.
Author: csyonghe <yonghe@google.com>
Reviewers: tpr, nhaehnle
Reviewed By: nhaehnle
Subscribers: arsenm, kzhuravl, jvesely, wdng, yaxunl, dstuttard, t-tye, hiraditya, kerbowa, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D76440
Arthur Eubanks