This patch mechanically replaces None with std::nullopt where the
compiler would warn if None were deprecated. The intent is to reduce
the amount of manual work required in migrating from Optional to
std::optional.
This is part of an effort to migrate from llvm::Optional to
std::optional:
https://discourse.llvm.org/t/deprecating-llvm-optional-x-hasvalue-getvalue-getvalueor/63716
llvm-debuginfo-analyzer is a command line tool that processes debug
info contained in a binary file and produces a debug information
format agnostic “Logical View”, which is a high-level semantic
representation of the debug info, independent of the low-level
format.
The code has been divided into the following patches:
1) Interval tree
2) Driver and documentation
3) Logical elements
4) Locations and ranges
5) Select elements
6) Warning and internal options
7) Compare elements
8) ELF Reader
9) CodeView Reader
Full details:
https://discourse.llvm.org/t/llvm-dev-rfc-llvm-dva-debug-information-visual-analyzer/62570
This patch:
This is a high level summary of the changes in this patch.
ELF Reader
- Support for ELF/DWARF.
LVBinaryReader, LVELFReader
Reviewed By: psamolysov, probinson
Differential Revision: https://reviews.llvm.org/D125783
This review is extracted from D96035.
DWARF Debuginfo classes have two representations for DIEs: DWARFDebugInfoEntry
(short) and DWARFDie(extended). Depending on the task, it might be more convenient
to use DWARFDebugInfoEntry or/and DWARFDie. DWARFUnit class already has methods
working with DWARFDie and DWARFDebugInfoEntry. This patch adds more
methods working with DWARFDebugInfoEntry to have paired functionality.
Reviewed By: aprantl
Differential Revision: https://reviews.llvm.org/D126059
This is minimum changes extracted from https://reviews.llvm.org/D78950. The old patch tried to add LRU eviction of caching data structure. Due to multiple layers of interfaces that users could be using, it was not clear where to put the functionality. While we work out on where to put that functionality, it'll be great to add this minimum interface change so that the user could implement their own memory management. More specifically:
* Add a clearLineTable method for DWARFDebugLine which erases the given offset from the LineTableMap.
* DWARFDebugContext adds the clearLineTableForUnit method that leverages clearLineTable to remove the object corresponding to a given compile unit, for memory management purposes. When it is referred to again, the line table object will be repopulated.
Reviewed By: dblaikie
Differential Revision: https://reviews.llvm.org/D90006
Currently, llvm-symbolizer doesn't like to parse .debug_info in order to
show the line info for global variables. addr2line does this. In the
future, I'm looking to migrate AddressSanitizer off of internal metadata
over to using debuginfo, and this is predicated on being able to get the
line info for global variables.
This patch adds the requisite support for getting the line info from the
.debug_info section for symbolizing global variables. This only happens
when you ask for a global variable to be symbolized as data.
Reviewed By: dblaikie
Differential Revision: https://reviews.llvm.org/D123538
As usual with that header cleanup series, some implicit dependencies now need to
be explicit:
llvm/DebugInfo/DWARF/DWARFContext.h no longer includes:
- "llvm/DebugInfo/DWARF/DWARFAcceleratorTable.h"
- "llvm/DebugInfo/DWARF/DWARFCompileUnit.h"
- "llvm/DebugInfo/DWARF/DWARFDebugAbbrev.h"
- "llvm/DebugInfo/DWARF/DWARFDebugAranges.h"
- "llvm/DebugInfo/DWARF/DWARFDebugFrame.h"
- "llvm/DebugInfo/DWARF/DWARFDebugLoc.h"
- "llvm/DebugInfo/DWARF/DWARFDebugMacro.h"
- "llvm/DebugInfo/DWARF/DWARFGdbIndex.h"
- "llvm/DebugInfo/DWARF/DWARFSection.h"
- "llvm/DebugInfo/DWARF/DWARFTypeUnit.h"
- "llvm/DebugInfo/DWARF/DWARFUnitIndex.h"
Plus llvm/Support/Errc.h not included by a bunch of llvm/DebugInfo/DWARF/DWARF*.h files
Preprocessed lines to build llvm on my setup:
after: 1065629059
before: 1066621848
Which is a great diff!
Discourse thread: https://discourse.llvm.org/t/include-what-you-use-include-cleanup
Differential Revision: https://reviews.llvm.org/D119723
Avoid duplicating the string decoding - improve the error messages down
in form parsing (& produce an Expected<const char*> instead of
Optional<const char*> to communicate the extra error details)
Some dwarf loaders in LLVM are hard-coded to only accept 4-byte and 8-byte address sizes. This patch generalizes acceptance into `DWARFContext::isAddressSizeSupported` and provides a common way to generate rejection errors.
The MSP430 target has been given new tests to cover dwarf loading cases that previously failed due to 2-byte addresses.
Reviewed By: dblaikie
Differential Revision: https://reviews.llvm.org/D111953
This patch implements suggestion done while reviewing D102634. It adds two fields:
ParentIdx and SiblingIdx. These fields allow fast navigation to die parent and
die sibling. These fields are set at the moment when dies are loaded.
dsymutil works 2% faster with this patch(run on clang binary).
Differential Revision: https://reviews.llvm.org/D110363
DWARFUnit::clearDIEs() uses std::vector::shrink_to_fit() to make
capacity of DieArray matched with its size(). The shrink_to_fit()
is not binding request to make capacity match with size().
Thus the memory could still be reserved after DWARFUnit::clearDIEs()
is called. This patch erases capacity when DWARFUnit::clearDIEs() is requested.
So the memory occupied by dies would be freed.
Differential Revision: https://reviews.llvm.org/D109499
This call would incorrectly overwrite (with the .debug_rnglists.dwo from
the executable, if there was one) the rnglists section instead of the
correct value (from the .debug_rnglists.dwo in the .dwo file) that's
applied in DWARFUnit::tryExtractDIEsIfNeeded
Originally committed as 04c203e310
Reverted in 768510632c due to the test
failing when encountering windows directory separators.
Fix the path separator platform issue with a FileCheck pattern {{[/\\]}}
Original commit message:
A followup to the feature added in 69da27c749
that added the optional "start file name" to match "start line" - but this
didn't work with Split DWARF because of the need for the decl file number
resolution code to refer back to the skeleton unit to find its .debug_line
contribution. So this patch adds the necessary infrastructure to track the
skeleton unit corresponding to a split full unit for the purpose of this
lookup.
A followup to the feature added in
69da27c749 that added the optional "start
file name" to match "start line" - but this didn't work with Split DWARF
because of the need for the decl file number resolution code to refer
back to the skeleton unit to find its .debug_line contribution. So this
patch adds the necessary infrastructure to track the skeleton unit
corresponding to a split full unit for the purpose of this lookup.
llvm-dwarfdump was silent even when the format of DWARF was invalid
and/or llvm-dwarfdump did not understand/support some of the constructs.
This can be pretty confusing as llvm-dwarfdump is a tool for DWARF
producers+consumers development.
Review comments also by @dblaikie.
Reviewed By: jhenderson
Differential Revision: https://reviews.llvm.org/D104271
In some cases a broken or invalid debug info could cause a crash in DWARFUnit::getInlinedChainForAddress during parsing a chain of in-lined functions. This patch fixes this issue.
Reviewed By: dblaikie
Differential Revision: https://reviews.llvm.org/D98119
There's no way to know whether there's a loclist contribution to parse
if there's no loclistx encoding - and if there is one, there's no need
to walk back from the loclist_base (or, uin the case of
info.dwo/loclist.dwo - starting at 0 in the contribution) to parse the
header, instead rely on the DWARF32/64 and address size in the CU
that's already available.
This would come up in split DWARF (non-split wouldn't try to read a
loclist header in the absence of a loclist_base) when one unit had
location lists and another does not (because the loclists.dwo section
would be non-empty in that case - in the case where it's empty the
parsing would silently skip).
Simplify the testing a bit, rather than needing a whole dwp, etc - by
creating a malformed loclists.dwo section (and use single file Split
DWARF) that would trip up any attempt to parse it - but no attempt
should be made.
It's not possible to do this in complete generality - a CU using a
sec_offset DW_AT_ranges has no way of knowing where its rnglists
contribution starts, so should not attempt to parse any full rnglist
table/header to do so. And even using FORM_rnglistx there's no need to
parse the header - the offset can be computed using the CU's DWARF
format (32 or 64) to compute offset entry sizes, and then the list
parsed at that offset without ever trying to find a rnglist contribution
header immediately prior to the rnglists_base.
Parsing DWARFv5 debug_loclist offsets when a CU is parsed is weighing
down memory usage of symbolizers that don't need to parse this data at
all. There's not much benefit to caching these anyway - since they are
O(1) lookup and reading once you know where the offset list starts (and
can do bounds checking with the offset list size too).
In general, I think it might be time to start paying down some of the
technical debt of loc/loclist/range/rnglist parsing to try to unify it a
bit more.
eg:
* Currently DWARFUnit has: RangeSection, RangeSectionBase, LocSection,
LocSectionBase, LocTable, RngListTable, LoclistTableHeader (be nice if
these were all wrapped up in two variables - one for loclists, one for
rnglists)
* rnglists and loclists are handled differently (see:
LoclistTableHeader, but no RnglistTableHeader)
* maybe all these types could be less stateful - lazily parse what they
need to, even reparsing rather than caching because it doesn't seem
too expensive, for instance. (though admittedly so long as it's
constantcost/overead per compilatiton that's probably adequate)
* Maybe implementing and using a DWARFDataExtractor that can be
sub-ranged (so we could slice it up to just the single contribution) -
though maybe that's not so useful because loc/ranges need to refer to
it by absolute, not contribution-relative mechanisms
Differential Revision: https://reviews.llvm.org/D86110
dumpStringOffsetsSection() expects the size of a contribution to be
correctly aligned. The patch adds the corresponding verifications for
pre-v5 cases.
Differential Revision: https://reviews.llvm.org/D85739
Current LLVM implementation uses `MCAsmInfo::CodePointerSize` as addr_size when emitting the DWARF data. llvm-dwarfdump, on the other hand, handles `addr_size`s of 4 and 8 properly and considers all other sizes as an error. This works for most of mainline targets except for MSP430 and AVR.
msp430-gcc v8.3.1 emits DWARF32 with addr_size = 4 (DWARF32 does not imply addr_size = 4, 32 refers to internal offset width of 4 bytes) that is handled by llvm-dwarfdump already. Still, emitting 2-byte target pointers on MSP430 seems correct as well (but not for MSP430X that is supported by msp430-gcc but not by LLVM and has 20-bit address space).
This patch make it possible for MSP430 debug info support to be tested with llvm-dwarfdump.
Differential Revision: https://reviews.llvm.org/D82055
The sizes of offsets in the `.debug_str_offsets.dwo` section depend on
the format of compilation or type units referencing them: 4 bytes for
DWARF32 units and 8 bytes for DWARF64 ones. The fix uses parsed units
to determine the actual size of offsets in the corresponding part of
the `.debug_str_offsets.dwo` section.
Differential Revision: https://reviews.llvm.org/D78555
The method is called from only one place and the call is already guarded
by a condition which checks that IsDWO is false.
Differential Revision: https://reviews.llvm.org/D78482
In DWARFv5, type units are stored in .debug_info sections, along with
compilation units, and they are distinguished by the unit_type field
in the header, not by the name of the section. It is impossible to
associate the correct index section of a DWP file with the unit before
the unit's header is read. This patch fixes reading DWARFv5 type units
by parsing the header first and then applying the index entry according
to the actual unit type.
Differential Revision: https://reviews.llvm.org/D77552
In package files, the base offset provided by index sections should be
used to find the contribution of a unit. The patch adds that base
offset when reading range list tables.
Differential revision: https://reviews.llvm.org/D77401
This fixes the reading of location lists headers for compilation units
in package files by adjusting the reading offset according to the
corresponding record in the unit index. This is required for
DW_FORM_loclistx to work.
Differential revision: https://reviews.llvm.org/D77146
Without the patch, all version 5 compile units in a DWP file read
location tables from the beginning of a .debug_loclists.dwo section.
The patch fixes that by adjusting the reading offset the same way as
for pre-v5 units. The section identifier to find the contribution
entry corresponds to the version of the unit.
Differential revision: https://reviews.llvm.org/D77145
This is a preparation for an upcoming patch which adds support for
DWARFv5 unit index sections. The patch adds tag "_EXT_" to identifiers
which reference sections that are deprecated in the DWARFv5 standard.
See D75929 for the discussion.
Differential Revision: https://reviews.llvm.org/D77141
The old name was a bit misleading because the functions actually return
contributions to the corresponding sections.
Differential revision: https://reviews.llvm.org/D77302
The integrity checks for index entries in DWARFUnitHeader::extract()
might cause the function to return before checking the state of an
Error object, which leads to a crash in runtime. The patch fixes the
issue by moving the checks in a safe place.
Differential Revision: https://reviews.llvm.org/D75177
Summary:
This patch is extracted from D74308.
It patches all usages of WithColor::error() and WithColor::warning
in DebugInfoDWARF library.
Depends on D74481
Reviewers: jhenderson, dblaikie, probinson, aprantl, JDevlieghere
Reviewed By: JDevlieghere
Subscribers: hiraditya, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D74635
Tests "dwarfdump-rnglists-dwarf64.s" and "dwarfdump-rnglists.s" were
malformed because they had missing required DWO ID fields in split
compilation unit headers. The patch fixes the tests and checks
the reading of a unit header more thoroughly.
Differential Revision: https://reviews.llvm.org/D71704
Fangrui Song