This is required because if there is a pure loop-invariant instruction, Loop Rotation
may decide to not clone it and just hoist it instead. If SCEV has previously cached
that it was loop-variant (not being smart enough to prove invariance), we may end
up with inconsistent cache state (which may later trigger false-negative assertion
failures checking that something was invariant).
This is a conservative fix that unconditionally drops the dispositions. We could
only drop it if the hoisting has actually happened, but it should take some time
understanding whether it's safe with all other things this function does.
Differential Revision: https://reviews.llvm.org/D134167
Reviewed By: fhahn
Callbr is no longer an indirect terminator in the sense that is
relevant here (that it's successors cannot be updated). The primary
effect of this change is that callbr no longer prevents formation
of loop simplify form.
I decided to drop the isIndirectTerminator() method entirely and
replace it with isa<IndirectBrInst>() checks. I assume this method
was added to abstract over indirectbr and callbr, but it never
really caught on, and there is nothing left to abstract anymore
at this point.
Differential Revision: https://reviews.llvm.org/D129849
Per the documentation in Support/InstructionCost.h, the purpose of an invalid cost is so that clients can change behavior on impossible to cost inputs. CodeMetrics was instead asserting that invalid costs never occurred.
On a target with an incomplete cost model - e.g. RISCV - this means that transformations would crash on (falsely) invalid constructs - e.g. scalable vectors. While we certainly should improve the cost model - and I plan to do so in the near future - we also shouldn't be crashing. This violates the explicitly stated purpose of an invalid InstructionCost.
I updated all of the "easy" consumers where bailouts were locally obvious. I plan to follow up with loop unroll in a following change.
Differential Revision: https://reviews.llvm.org/D127131
Clang-format InstructionSimplify and convert all "FunctionName"s to
"functionName". This patch does touch a lot of files but gets done with
the cleanup of InstructionSimplify in one commit.
This is the alternative to the less invasive clang-format only patch: D126783
Reviewed By: spatel, rengolin
Differential Revision: https://reviews.llvm.org/D126889
This patch fixes problems reported in PR51981.
When rotating a loop it isn't enough to just forget SCEV for that
loop nest. When rotating we might clone some instructions from the
old header into the preheader, and insert new PHI nodes to merge
values together. There could be users of the original value that are
updated to use the PHI result. And those users were not necessarily
depending on a PHI node earlier, so they weren't cleaned up when just
forgetting all SCEV:s for the loop nest. So we need to explicitly
forget those values to avoid invalid cached SCEV expressions.
Reviewed By: fhahn, mkazantsev
Differential Revision: https://reviews.llvm.org/D110813
Move the findDbg* functions into lib/IR/DebugInfo.cpp from
lib/Transforms/Utils/Local.cpp.
D99169 adds a call to a function (findDbgUsers) that lives in
lib/Transforms/Utils/Local.cpp (LLVMTransformUtils) from lib/IR/Value.cpp
(LLVMCore). The Core lib doesn't include TransformUtils. The builtbots caught
this here: https://lab.llvm.org/buildbot/#/builders/109/builds/12664. This patch
moves the function, and the 3 similar ones for consistency, into DebugInfo.cpp
which is part of LLVMCore.
Reviewed By: dblaikie, rnk
Differential Revision: https://reviews.llvm.org/D100632
Add the subclass, update a few places which check for the intrinsic to use idiomatic dyn_cast, and update the public interface of AssumptionCache to use the new class. A follow up change will do the same for the newer assumption query/bundle mechanisms.
Fixed section of code that iterated through a SmallDenseMap and added
instructions in each iteration, causing non-deterministic code; replaced
SmallDenseMap with MapVector to prevent non-determinism.
This reverts commit 01ac6d1587.
This caused non-deterministic compiler output; see comment on the
code review.
> This patch updates the various IR passes to correctly handle dbg.values with a
> DIArgList location. This patch does not actually allow DIArgLists to be produced
> by salvageDebugInfo, and it does not affect any pass after codegen-prepare.
> Other than that, it should cover every IR pass.
>
> Most of the changes simply extend code that operated on a single debug value to
> operate on the list of debug values in the style of any_of, all_of, for_each,
> etc. Instances of setOperand(0, ...) have been replaced with with
> replaceVariableLocationOp, which takes the value that is being replaced as an
> additional argument. In places where this value isn't readily available, we have
> to track the old value through to the point where it gets replaced.
>
> Differential Revision: https://reviews.llvm.org/D88232
This reverts commit df69c69427.
This patch updates the various IR passes to correctly handle dbg.values with a
DIArgList location. This patch does not actually allow DIArgLists to be produced
by salvageDebugInfo, and it does not affect any pass after codegen-prepare.
Other than that, it should cover every IR pass.
Most of the changes simply extend code that operated on a single debug value to
operate on the list of debug values in the style of any_of, all_of, for_each,
etc. Instances of setOperand(0, ...) have been replaced with with
replaceVariableLocationOp, which takes the value that is being replaced as an
additional argument. In places where this value isn't readily available, we have
to track the old value through to the point where it gets replaced.
Differential Revision: https://reviews.llvm.org/D88232
This patch updates DbgVariableIntrinsics to support use of a DIArgList for the
location operand, resulting in a significant change to its interface. This patch
does not update all IR passes to support multiple location operands in a
dbg.value; the only change is to update the DbgVariableIntrinsic interface and
its uses. All code outside of the intrinsic classes assumes that an intrinsic
will always have exactly one location operand; they will still support
DIArgLists, but only if they contain exactly one Value.
Among other changes, the setOperand and setArgOperand functions in
DbgVariableIntrinsic have been made private. This is to prevent code from
setting the operands of these intrinsics directly, which could easily result in
incorrect/invalid operands being set. This does not prevent these functions from
being called on a debug intrinsic at all, as they can still be called on any
CallInst pointer; it is assumed that any code directly setting the operands on a
generic call instruction is doing so safely. The intention for making these
functions private is to prevent DIArgLists from being overwritten by code that's
naively trying to replace one of the Values it points to, and also to fail fast
if a DbgVariableIntrinsic is updated to use a DIArgList without a valid
corresponding DIExpression.
In the cloning infrastructure, only track an MDNode mapping,
without explicitly storing the Metadata mapping, same as is done
during inlining. This makes things slightly simpler.
Similar to D92887, LoopRotation also needs duplicate the noalias scopes when rotating a `@llvm.experimental.noalias.scope.decl` across a block boundary.
This is based on the version from the Full Restrict paches (D68511).
The problem it fixes also showed up in Transforms/Coroutines/ex5.ll after D93040 (when enabling strict checking with -verify-noalias-scope-decl-dom).
Reviewed By: nikic
Differential Revision: https://reviews.llvm.org/D94306
D84108 exposed a bad interaction between inlining and loop-rotation
during regular LTO, which is causing notable regressions in at least
CINT2006/473.astar.
The problem boils down to: we now rotate a loop just before the vectorizer
which requires duplicating a function call in the preheader when compiling
the individual files ('prepare for LTO'). But this then prevents further
inlining of the function during LTO.
This patch tries to resolve this issue by making LoopRotate more
conservative with respect to rotating loops that have inline-able calls
during the 'prepare for LTO' stage.
I think this change intuitively improves the current situation in
general. Loop-rotate tries hard to avoid creating headers that are 'too
big'. At the moment, it assumes all inlining already happened and the
cost of duplicating a call is equal to just doing the call. But with LTO,
inlining also happens during full LTO and it is possible that a previously
duplicated call is actually a huge function which gets inlined
during LTO.
From the perspective of LV, not much should change overall. Most loops
calling user-provided functions won't get vectorized to start with
(unless we can infer that the function does not touch memory, has no
other side effects). If we do not inline the 'inline-able' call during
the LTO stage, we merely delayed loop-rotation & vectorization. If we
inline during LTO, chances should be very high that the inlined code is
itself vectorizable or the user call was not vectorizable to start with.
There could of course be scenarios where we inline a sufficiently large
function with code not profitable to vectorize, which would have be
vectorized earlier (by scalarzing the call). But even in that case,
there probably is no big performance impact, because it should be mostly
down to the cost-model to reject vectorization in that case. And then
the version with scalarized calls should also not be beneficial. In a way,
LV should have strictly more information after inlining and make more
accurate decisions (barring cost-model issues).
There is of course plenty of room for things to go wrong unexpectedly,
so we need to keep a close look at actual performance and address any
follow-up issues.
I took a look at the impact on statistics for
MultiSource/SPEC2000/SPEC2006. There are a few benchmarks with fewer
loops rotated, but no change to the number of loops vectorized.
Reviewed By: sanwou01
Differential Revision: https://reviews.llvm.org/D94232
Add support for mixed pre/post CFG views.
Update usages of the MemorySSAUpdater to use the new DT API by
requesting the DT updates to be done by the MSSAUpdater.
Differential Revision: https://reviews.llvm.org/D93371
This patch changes MergeBlockIntoPredecessor to skip the call to
RemoveRedundantDbgInstrs, in effect partially reverting D71480 due to
some compile-time issues spotted in LoopUnroll and SimplifyCFG.
The call to RemoveRedundantDbgInstrs appears to have changed the
worst-case behavior of the merging utility. Loosely speaking, it seems
to have gone from O(#phis) to O(#insts).
It might not be possible to mitigate this by scanning a block to
determine whether there are any debug intrinsics to remove, since such a
scan costs O(#insts).
So: skip the call to RemoveRedundantDbgInstrs. There's surprisingly
little fallout from this, and most of it can be addressed by doing
RemoveRedundantDbgInstrs later. The exception is (the block-local
version of) SimplifyCFG, where it might just be too expensive to call
RemoveRedundantDbgInstrs.
Differential Revision: https://reviews.llvm.org/D88928
The actual rotation happens in processLoop, so the second removed
call to verifyMemorySSA was unnecessary.
In fact, processLoop/rotateLoop already verify MemorySSA before
and after transforming each loop. Hence, both calls can be removed.
Pointed out by @lebedev.ri post-commit D51718.
In case of loops with multiple exit where all-but-one exit are deoptimizing
it might happen that the first rotation will end up with latch having a deoptimizing
exit. This makes the loop unsuitable for trip-count analysis (say, getLoopEstimatedTripCount)
as well as for loop transformations that know how to handle multple deoptimizing exits.
It pretty much means that canonical form in multple-deoptimizing-exits case should be
with non-deoptimizing exit at latch.
Teach loop-rotation to reach this canonical form by repeating rotation.
-loop-rotate-multi option introduced to control this behavior, currently disabled by default.
Reviewers: skatkov, asbirlea, reames, fhahn
Reviewed By: skatkov
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D73058
Summary:
There are two cases where a block is merged into its predecessor and the
MergeBlockIntoPredecessor API is not used. Update the API so it can be
reused in the other cases, in order to avoid code duplication.
Cleanup motivated by D68659.
Reviewers: chandlerc, sanjoy.google, george.burgess.iv
Subscribers: llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D68670
llvm-svn: 375050
Summary:
The rule for the moveAllAfterMergeBlocks API si for all instructions
from `From` to have been moved to `To`, while keeping the CFG edges (and
block terminators) unchanged.
Update all the callsites for moveAllAfterMergeBlocks to follow this.
Pending follow-up: since the same behavior is needed everytime, merge
all callsites into one. The common denominator may be the call to
`MergeBlockIntoPredecessor`.
Resolves PR43569.
Reviewers: george.burgess.iv
Subscribers: Prazek, sanjoy.google, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D68659
llvm-svn: 374177
Summary:
The map kept in loop rotate is used for instruction remapping, in order
to simplify the clones of instructions. Thus, if an instruction can be
simplified, its simplified value is placed in the map, even when the
clone is added to the IR. MemorySSA in contrast needs to know about that
clone, so it can add an access for it.
To resolve this: keep a different map for MemorySSA.
Reviewers: george.burgess.iv
Subscribers: jlebar, Prazek, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D63680
llvm-svn: 365672
Summary:
While implementing inlining support for callbr
(https://bugs.llvm.org/show_bug.cgi?id=40722), I hit a crash in Loop
Rotation when trying to build the entire x86 Linux kernel
(drivers/char/random.c). This is a small fix up to r353563.
Test case is drivers/char/random.c (with callbr's inlined), then ran
through creduce, then `opt -opt-bisect-limit=<limit>`, then bugpoint.
Thanks to Craig Topper for immediately spotting the fix, and teaching me
how to fish.
Reviewers: craig.topper, jyknight
Reviewed By: craig.topper
Subscribers: hiraditya, llvm-commits, srhines
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D58929
llvm-svn: 355564
DomTreeUpdater depends on headers from Analysis, but is in IR. This is a
layering violation since Analysis depends on IR. Relocate this code from IR
to Analysis to fix the layering violation.
llvm-svn: 353265
to reflect the new license.
We understand that people may be surprised that we're moving the header
entirely to discuss the new license. We checked this carefully with the
Foundation's lawyer and we believe this is the correct approach.
Essentially, all code in the project is now made available by the LLVM
project under our new license, so you will see that the license headers
include that license only. Some of our contributors have contributed
code under our old license, and accordingly, we have retained a copy of
our old license notice in the top-level files in each project and
repository.
llvm-svn: 351636
by `getTerminator()` calls instead be declared as `Instruction`.
This is the biggest remaining chunk of the usage of `getTerminator()`
that insists on the narrow type and so is an easy batch of updates.
Several files saw more extensive updates where this would cascade to
requiring API updates within the file to use `Instruction` instead of
`TerminatorInst`. All of these were trivial in nature (pervasively using
`Instruction` instead just worked).
llvm-svn: 344502
This is a bit awkward in a handful of places where we didn't even have
an instruction and now we have to see if we can build one. But on the
whole, this seems like a win and at worst a reasonable cost for removing
`TerminatorInst`.
All of this is part of the removal of `TerminatorInst` from the
`Instruction` type hierarchy.
llvm-svn: 340701
The core get and set routines move to the `Instruction` class. These
routines are only valid to call on instructions which are terminators.
The iterator and *generic* range based access move to `CFG.h` where all
the other generic successor and predecessor access lives. While moving
the iterator here, simplify it using the iterator utilities LLVM
provides and updates coding style as much as reasonable. The APIs remain
pointer-heavy when they could better use references, and retain the odd
behavior of `operator*` and `operator->` that is common in LLVM
iterators. Adjusting this API, if desired, should be a follow-up step.
Non-generic range iteration is added for the two instructions where
there is an especially easy mechanism and where there was code
attempting to use the range accessor from a specific subclass:
`indirectbr` and `br`. In both cases, the successors are contiguous
operands and can be easily iterated via the operand list.
This is the first major patch in removing the `TerminatorInst` type from
the IR's instruction type hierarchy. This change was discussed in an RFC
here and was pretty clearly positive:
http://lists.llvm.org/pipermail/llvm-dev/2018-May/123407.html
There will be a series of much more mechanical changes following this
one to complete this move.
Differential Revision: https://reviews.llvm.org/D47467
llvm-svn: 340698
In the past, DbgInfoIntrinsic has a strong assumption that these
intrinsics all have variables and expressions attached to them.
However, it is too strong to derive the class for other debug entities.
Now, it has problems for debug labels.
In order to make DbgInfoIntrinsic as a base class for 'debug info', I
create a class for 'variable debug info', DbgVariableIntrinsic.
DbgDeclareInst, DbgAddrIntrinsic, and DbgValueInst will be derived from it.
Differential Revision: https://reviews.llvm.org/D50220
llvm-svn: 338984
Summary:
This patch is the second in a series of patches related to the [[ http://lists.llvm.org/pipermail/llvm-dev/2018-June/123883.html | RFC - A new dominator tree updater for LLVM ]].
It converts passes (e.g. adce/jump-threading) and various functions which currently accept DDT in local.cpp and BasicBlockUtils.cpp to use the new DomTreeUpdater class.
These converted functions in utils can accept DomTreeUpdater with either UpdateStrategy and can deal with both DT and PDT held by the DomTreeUpdater.
Reviewers: brzycki, kuhar, dmgreen, grosser, davide
Reviewed By: brzycki
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D48967
llvm-svn: 338814
Review feedback from r328165. Split out just the one function from the
file that's used by Analysis. (As chandlerc pointed out, the original
change only moved the header and not the implementation anyway - which
was fine for the one function that was used (since it's a
template/inlined in the header) but not in general)
llvm-svn: 333954
The DEBUG() macro is very generic so it might clash with other projects.
The renaming was done as follows:
- git grep -l 'DEBUG' | xargs sed -i 's/\bDEBUG\s\?(/LLVM_DEBUG(/g'
- git diff -U0 master | ../clang/tools/clang-format/clang-format-diff.py -i -p1 -style LLVM
- Manual change to APInt
- Manually chage DOCS as regex doesn't match it.
In the transition period the DEBUG() macro is still present and aliased
to the LLVM_DEBUG() one.
Differential Revision: https://reviews.llvm.org/D43624
llvm-svn: 332240
LoopRotate only invalidates innermost loops while the changes that it makes may
also affert any of this parents. With patch rL329047, SCEV becomes much smarter
about calculation of exit counts for outer loops, so we cannot assume that they are
not affected.
Differential Revision: https://reviews.llvm.org/D45945
llvm-svn: 330582
Summary:
The following changes addresses the following two issues.
1) The existing loop rotation pass contains both loop latch simplification and loop rotation. So one flag RotationOnly is added to be passed to the loop rotation pass.
2) The threshold value is initialized with MAX_UINT since the loop rotation utility should not have threshold limit.
Reviewers: dmgreen, efriedma
Reviewed By: efriedma
Differential Revision: https://reviews.llvm.org/D45582
llvm-svn: 330362
If a loop has a loop exiting latch, it can be profitable
to rotate the loop if it leads to the simplification of
a phi node. Perform rotation in these cases even if loop
rotate itself didnt simplify the loop to get there.
Differential Revision: https://reviews.llvm.org/D44199
llvm-svn: 328933
Florian Hahn