This switches everything to use the memory attribute proposed in
https://discourse.llvm.org/t/rfc-unify-memory-effect-attributes/65579.
The old argmemonly, inaccessiblememonly and inaccessiblemem_or_argmemonly
attributes are dropped. The readnone, readonly and writeonly attributes
are restricted to parameters only.
The old attributes are auto-upgraded both in bitcode and IR.
The bitcode upgrade is a policy requirement that has to be retained
indefinitely. The IR upgrade is mainly there so it's not necessary
to update all tests using memory attributes in this patch, which
is already large enough. We could drop that part after migrating
tests, or retain it longer term, to make it easier to import IR
from older LLVM versions.
High-level Function/CallBase APIs like doesNotAccessMemory() or
setDoesNotAccessMemory() are mapped transparently to the memory
attribute. Code that directly manipulates attributes (e.g. via
AttributeList) on the other hand needs to switch to working with
the memory attribute instead.
Differential Revision: https://reviews.llvm.org/D135780
We have a downstream project with a command-line utility that operates
pretty much exactly like `opt`. So it would make sense for us to
maintain tests with update_test_checks.py with our custom tool
substituted for `opt`, as this change allows.
Differential Revision: https://reviews.llvm.org/D136329
Part of patchset to add initial support for ARM64EC.
I'm not completely sure I understand the reason for this restriction,
but Microsoft documentation says that asynchronous signals clobber these
registers, so we can't ever use them.
As far as I know, none of these registers have any hardcoded meaning, so
reserving them shouldn't have any significant side-effects.
Differental Revision: https://reviews.llvm.org/D125413
While this does not matter for most targets, when building for Arm Morello,
we have to mark the symbol as a function and add size information, so that
LLD can correctly evaluate relocations against the local symbol.
Since Morello is an out-of-tree target, I tried to reproduce this with
in-tree backends and with the previous reviews applied this results in
a noticeable difference when targeting Thumb.
Background: Morello uses a method similar Thumb where the encoding mode is
specified in the LSB of the symbol. If we don't mark the target as a
function, the relocation will not have the LSB set and calls will end up
using the wrong encoding mode (which will almost certainly crash).
Reviewed By: MaskRay
Differential Revision: https://reviews.llvm.org/D131429
While working on https://reviews.llvm.org/D131429, I got a test diff in
one of the VE tests and running update_llc_test_checks.py deleted all the
code for that function. This updates the regex to handle this new output.
Reviewed By: kaz7
Differential Revision: https://reviews.llvm.org/D131431
ARMAsmPrinter::emitFunctionEntryLabel() was not calling the base class
function so the $local alias was not being emitted. This should not have
any function effect right now since ARM does not generate different code
for the $local symbols, but it could be improved in the future.
Reviewed By: MaskRay
Differential Revision: https://reviews.llvm.org/D131392
There is at least one Clang test (clang/test/CodeGen/arm_acle.c) which
has functions guarded by #if's that cause those functions to be compiled
only for a subset of RUN lines.
This results in a case where one RUN line has a body for the function
and another doesn't. Treat this case as a conflict for any prefixes that
the two RUN lines have in common.
This change exposed a bug where functions with '$' in the name weren't
properly recognized in ARM assembly (despite there being a test case
that was supposed to catch the problem!). This bug is fixed as well.
Differential Revision: https://reviews.llvm.org/D130089
This patch adds OMPIRBuilder support for the simdlen clause for the
simd directive. It uses the simdlen support in OpenMPIRBuilder when
it is enabled in Clang. Simdlen is lowered by OpenMPIRBuilder by
generating the loop.vectorize.width metadata.
Reviewed By: jdoerfert, Meinersbur
Differential Revision: https://reviews.llvm.org/D129149
Add LoongArch assembly scrubbing and triple support to update_llc_test_checks.
Depends on D128432
Reviewed By: MaskRay, xen0n
Differential Revision: https://reviews.llvm.org/D128433
When we appended check lines at the end we could not share prefixes
before. This patch should make it possible and allow us to reduce
some check line counts (especially for Clang/OpenMP tests).
See also: https://reviews.llvm.org/D128686
Differential Revision: https://reviews.llvm.org/D128684
This is scoped to autogenerated tests.
The goal is to support having each RUN line specify a list of
check-prefixes where one can specify potentially redundant prefixes. For example,
for X86, if one specified prefixes for both AVX1 and AVX2, and the codegen happened to
match today, one of the prefixes would be used and the onther one not.
If the unused prefix were dropped, and later, codegen differences were
introduced, one would have to go figure out where to add what prefix
(paraphrasing
https://lists.llvm.org/pipermail/llvm-dev/2021-February/148326.html)
To avoid getting errors due to unused prefixes, whole directories can be
opted out (as discussed on that thread), but that means that tests that
aren't autogenerated in such directories could have undetected unused
prefix bugs.
This patch proposes an alternative that both avoids the above, dir-level
optout, and supports the main autogen scenario discussed first. The autogen
tool appends at the end of the test file the list of unused prefixes,
together with a note explaining that is the case. Each prefix is set up
to always pass.
This way, unexpected unused prefixes are easily discoverable, and
expected cases "just work".
Differential Revision: https://reviews.llvm.org/D124306
Variable captures such as `<MCInst #` can change based on unrelated changes
to the LLVM backends, to avoid the generated test cases being different
use an incrementing counter for variable names instead of using the
actual value from the output file.
This change may also be beneficial for some nameless IR variables
(especially when combined with filtering of output), but for now I've
restricted this change to the obvious candidates (--asm-show-inst output).
Reviewed By: MaskRay
Differential Revision: https://reviews.llvm.org/D125405
To avoid test churn when backends add/rename new instructions/registers,
it makes sense to use FileCheck captures for the exact MCInst/Reg number.
This is motivated by D125307, where I use --asm-show-inst to differentiate
the output for multiple instructions with the same mnemonic.
This does not quite fix the churn issue yet: While files with the generated
checks will be immune to the numbers changing, the update script test
still suffers from this problem since the number is encoded in the
FileCheck variable name. I plan to address this in a follow-up patch.
Reviewed By: MaskRay
Differential Revision: https://reviews.llvm.org/D125307
This avoids repeated calls to get_idx_from_ir_value_match() and will make
it easier for a future patch that adds new assembly-level nameless values
in addition to the IR ones.
Differential Revision: https://reviews.llvm.org/D125390
Specifically for: !tbaa, !tbaa.struct, !annotation, !srcloc, !nosanitize.
The goal is to avoid test brittleness caused by hardcoded values.
Differential Revision: https://reviews.llvm.org/D123273
While working on D122986, noticed that indentation size varies even within
one file. Fixed that - now indentation is 2 spaces everywhere. This indentation
Differential Revision: https://reviews.llvm.org/D123859
Subj, or on other words, we have a lot of tests that are driven by
the LoopVectorizer's debug output, but we don't have
any meaningful way to autogenerate checklines in them,
which means that an insurmountable amount of manual work
is required when modifying the appropriate cost models.
That is not sustainable, so this presents a solution.
Reviewed By: RKSimon
Differential Revision: https://reviews.llvm.org/D121133
This patch makes possible generating NVPTX assembly check lines with
update_llc_test_checks.py utility.
Differential Revision: https://reviews.llvm.org/D122986
We can't just split by space, that's not going to give us the same
argv we'd have gotten from the shell, it could be in a string,
we must actually parse that as argv.
body_start was never used, resulting in the first filtered line to be
skipped.
Fixes the --filter option introduced in D117694.
Differential Revision: https://reviews.llvm.org/D119704
Add a check on run lines to pick up isel options in llc commands and allow
generating check lines of isel final output other than assembly. If llc command
line contains -debug-only=isel, update_llc_test_checks.py will try to scrub isel
output, otherwise, the script will fall back on default behaviour, which is try to
scrub assembly output instead.
The motivation of this change is to allow usage of update_llc_test_checks.py to
autogenerate checks of instruction selection results. In this way, we can detect
errors at an earlier stage before the compilation goes all the way to assembly.
It is an example of having some transparency for the stages between IR and
assembly. These generated tests are almost like "unit tests" of isel stage.
This patch only implements the initial change to differentiate isel output from
assembly output for Lanai. Other targets will not be supported for isel check
generation at the moment. Although adding support for it will only require
implementing the function regex and scrubber for corresponding targets.
The Lanai implementation was chosen mainly for the simplicity of demonstrating
the difference between isel checks and asm checks.
This patch also do not include the implementation of function prefix, which is
required for the generated isel checks to pass. I will put up a follow up revision
for the function prefix change to complete isel support.
Reviewed By: Flakebi
Differential Revision: https://reviews.llvm.org/D119368
Re-add filtering options with fixes for failed tests. We were not passing the
is_filtered argument in all check generator calls in update_cc_test_checks.py
Enhance the various update_*_test_checks.py tools to allow filtering the tool
output with regular expressions. The --filter option will emit only tool output
lines matching the given regular expression while the --filter-out option will
emit only tools output lines not matching the given regular expression. Filters
are applied in order of appearance on the command line (or in UTC_ARGS) and the
first matching filter terminates the search.
This allows test authors to create more focused tests by removing irrelevant
tool output and checking only the pieces of output necessary to test the desired
functionality.
Differential Revision: https://reviews.llvm.org/D117694
Enhance the various update_*_test_checks.py tools to allow filtering the tool
output with regular expressions. The --filter option will emit only tool output
lines matching the given regular expression while the --filter-out option will
emit only tools output lines not matching the given regular expression. Filters
are applied in order of appearance on the command line (or in UTC_ARGS) and the
first matching filter terminates the search.
This allows test authors to create more focused tests by removing irrelevant
tool output and checking only the pieces of output necessary to test the desired
functionality.
Differential Revision: https://reviews.llvm.org/D117694
We won't talk about how long it took me to figure this out. The difference in batch vs interactive on the "did you mean to print bitcode" message made this confusing.
On MIPS, functions with exception handling code emits an additional
temporary label at the start of the function (due to UseAssignmentForEHBegin):
_Z8do_catchv: # @_Z8do_catchv
.Ltmp3:
.set .Lfunc_begin0, .Ltmp3
.cfi_startproc
.cfi_personality 128, DW.ref.__gxx_personality_v0
.cfi_lsda 0, .Lexception0
.frame $c11,48,$c17
.mask 0x00000000,0
.fmask 0x00000000,0
.set noreorder
.set nomacro
.set noat
# %bb.0: # %entry
The `[^:]*` regex was terminating the search after .Ltmp<N>: and therefore
not detecting functions with exception handling.
Reviewed By: atanasyan, MaskRay
Differential Revision: https://reviews.llvm.org/D100027
Make the update_llc_test_checks script test independant of llc behavior
by using cat with static files to simulate llc output.
This allows changing llc without breaking the script test case.
The update script is executed in a temporary directory, so the
llc-generated assembly files are copied there. %T is deprecated, but it
allows copying a file with a predictable filename.
Differential Revision: https://reviews.llvm.org/D110143
When checking if two prefixes can be merged for a function,
update_llc_test_checks.py removed IR comments before comparing
llc outputs of different RUN lines.
This means, if one RUN line emited lines starting with ';' and another
RUN line emited the same lines except the ones starting with ';', both
RUNs would be merged (if they share a prefix).
However, CHECK-NEXT lines check the comments, otherwise they fail, so
the script should not merge RUNs if they contain different comments.
Differential Revision: https://reviews.llvm.org/D101312
For example, in OpenMP offload codegen tests, global variables like
`.offload_maptypes*` are much easier to read in hex.
Reviewed By: jdoerfert
Differential Revision: https://reviews.llvm.org/D104743
`--check-globals` activates checks for all global values, and
`--global-value-regex` filters them. For example, I'd like to use it
in OpenMP offload codegen tests to check only global variables like
`.offload_maptypes*`.
Reviewed By: jdoerfert
Differential Revision: https://reviews.llvm.org/D104742
This option is already supported by update_test_checks.py, but it can
also be useful in update_cc_test_checks.py. For example, I'd like to
use it in OpenMP offload codegen tests to check global variables like
`.offload_maptypes*`.
Reviewed By: jdoerfert, arichardson, ggeorgakoudis
Differential Revision: https://reviews.llvm.org/D104714
Some parts of common.py already permit comment styles besides `;`.
Handle the remaining cases. Specifically, a future patch will extend
update_cc_test_checks.py to call add_global_checks.
Reviewed By: jdoerfert
Differential Revision: https://reviews.llvm.org/D104713
Without this patch, llvm/utils/update_cc_test_checks.py fails to
perform `--replace-value-regex` replacements when two RUN lines
produce the same output and use the same single FileCheck prefix. The
problem is that replacements in a RUN line's output are not performed
until after comparing against previous RUN lines' output, where
replacements have already been performed. This patch fixes that.
Reviewed By: MaskRay
Differential Revision: https://reviews.llvm.org/D104566
Now that FileCheck eagerly complains when prefixes are unused,
the update script does the same, and is becoming very common
to need to drop some prefixes, yet figuring out the file
it complains about isn't obvious unless it actually tells us.
True is a bad default: the useful symbol names and `@GOTPCREL` are scrubbed.
Change the default and add global variable tests to x86-basic.ll
(renamed from x86_function_name.ll since we now also test variables).
I updated some tests to show the differences.
Updated LCPI regex to include Darwin style `LCPI_[0-9]+_[0-9]+` (no
leading dot).
Reviewed By: pengfei
Differential Revision: https://reviews.llvm.org/D102588
Nicolai Hähnle