Rather than storing a single flat list of SourceLocations where the diagnostic
state changes (in source order), we now store a separate list for each FileID
in which there is a diagnostic state transition. (State for other files is
built and cached lazily, on demand.) This has two consequences:
1) We can now sensibly support modules, and properly track the diagnostic state
for modular headers (this matters when, for instance, triggering instantiation
of a template defined within a module triggers diagnostics).
2) It's much faster than the old approach, since we can now just do a binary
search on the offsets within the FileID rather than needing to call
isBeforeInTranslationUnit to determine source order (which is surprisingly
slow). For some pathological (but real world) files, this reduces total
compilation time by more than 10%.
For now, the diagnostic state points for modules are loaded eagerly. It seems
feasible to defer this until diagnostic state information for one of the
module's files is needed, but that's not part of this patch.
llvm-svn: 293123
Summary:
Add a callback from ASTReader to DeserializationListener when the former
reads an IMPORTED_MODULES block. This supports Swift in using PCH for
bridging headers.
Reviewers: doug.gregor, manmanren, bruno
Reviewed By: manmanren
Subscribers: cfe-commits
Differential Revision: https://reviews.llvm.org/D28779
llvm-svn: 292436
D28684 changed llvm::zlib to return Error instead of Status.
It was accepted and committed in r292214, but then reverted in r292217
because I missed that clang code also needs to be updated.
Patch do that.
D28684 recommitted again as r292226
Differential revision: https://reviews.llvm.org/D28807
llvm-svn: 292227
Summary:
We do not currently track the source locations for exception specifications such
that their source range can be queried through the AST. This leads to trying to
write more complex code to determine the source range for uses like FixItHints
(see D18575 for an example). In addition to use within tools like clang-tidy, I
think this information may become more important to track as exception
specifications become more integrated into the type system.
Patch by Don Hinton.
Reviewers: rsmith
Subscribers: malcolm.parsons, sbarzowski, alexfh, hintonda, cfe-commits
Differential Revision: https://reviews.llvm.org/D20428
llvm-svn: 291771
Summary:
For ASTDeclReader and ASTStmtReader, every parameter "unsigned &Idx" ultimately
comes from a variable that is defined on the stack, next to the RecordData. This
change moves that index into the ASTRecordReader.
TypeLocReader cannot be transitioned, due to TableGen-generated code which calls
ASTReader::GetTypeSourceInfo.
Reviewers: rsmith
Subscribers: cfe-commits
Differential Revision: https://reviews.llvm.org/D27836
llvm-svn: 290217
`RawComments` are sorted by comparing underlying `SourceLocation`'s. This is
done by comparing `FileID` and `Offset`; when the `FileID` is the same it means
the locations are within the same TU and the `Offset` is used.
FileID, from the source code: "A mostly-opaque identifier, where 0 is
"invalid", >0 is this module, and <-1 is something loaded from another
module.". That said, when de-serializing SourceLocations, FileID's from
RawComments loaded from other modules get negative IDs where previously they
were positive. This makes imported RawComments unsorted, leading to a wrong
merge with other comments from the current TU. Fix that by sorting RawComments
properly after de-serialization and before merge.
This fixes an assertion in `ASTContext::getRawCommentForDeclNoCache`,
which fires only in a debug build of clang.
Differential Revision: https://reviews.llvm.org/D27546
rdar://problem/29287314
llvm-svn: 290134
Added a map to associate types and declarations with extensions.
Refactored existing diagnostic for disabled types associated with extensions and extended it to declarations for generic situation.
Fixed some bugs for types associated with extensions.
Allow users to use pragma to declare types and functions for supported extensions, e.g.
#pragma OPENCL EXTENSION the_new_extension_name : begin
// declare types and functions associated with the extension here
#pragma OPENCL EXTENSION the_new_extension_name : end
Differential Revision: https://reviews.llvm.org/D21698
llvm-svn: 289979
Summary:
When reading an ASTRecord, each RecordData is logically contained within a
single ModuleFile, and global(er) state is contained by a single ASTReader. This
means that any operations that read from a RecordData and reference an ASTReader
or a ModuleFile, will always reference the same ASTReader or ModuleFile.
ASTRecordReader groups these together so that parameters don't need to be
duplicated ad infinitum. Most uses of the Idx variable seem to be redunant
aliases as well, but I'll leave that for now.
Reviewers: rsmith
Subscribers: cfe-commits
Differential Revision: https://reviews.llvm.org/D27784
llvm-svn: 289870
copy constructors of classes with array members, instead using
ArrayInitLoopExpr to represent the initialization loop.
This exposed a bug in the static analyzer where it was unable to differentiate
between zero-initialized and unknown array values, which has also been fixed
here.
llvm-svn: 289618
Summary:
The Swift frontend is acquiring the ability to load non-module PCH files containing
bridging definitions from C/ObjC. As part of this work, it needs to know which submodules
were imported by a PCH in order to wrap them in local Swift modules. This information
is collected by ASTReader::ReadAST in a local vector, but is currently kept private.
The change here is just to make the type of the vector elements public, and provide
an optional out-parameter to the ReadAST method to provide the vector's contents to
a caller after a successful read.
Reviewers: manmanren, rsmith, doug.gregor
Subscribers: cfe-commits
Differential Revision: https://reviews.llvm.org/D27580
llvm-svn: 289276
PCH files store the macro history for a given macro, and the whole history list
for one identifier is given to the Preprocessor at once via
Preprocessor::setLoadedMacroDirective(). This contained an assert that no macro
history exists yet for that identifier. That's usually true, but it's not true
for builtin macros, which are created in Preprocessor() before flags and pchs
are processed. Luckily, ASTWriter stops writing macro history lists at builtins
(see shouldIgnoreMacro() in ASTWriter.cpp), so the head of the history list was
missing for builtin macros. So make the assert weaker, and splice the history
list to the existing single define for builtins.
https://reviews.llvm.org/D27545
llvm-svn: 289228
This adds the access qualifier to the Pipe Type, rather than using a class
hierarchy.
It also fixes mergeTypes for Pipes, by disallowing merges. Only identical
pipe types can be merged. The test case in invalid-pipes-cl2.0.cl is added
to check that.
llvm-svn: 288332
As proposed on llvm-dev:
http://lists.llvm.org/pipermail/llvm-dev/2016-October/106630.html
Move block info block state to a new class, BitstreamBlockInfo.
Clients may set the block info for a particular cursor with the
BitstreamCursor::setBlockInfo() method.
At this point BitstreamReader is not much more than a container for an
ArrayRef<uint8_t>, so remove it and replace all uses with direct uses
of memory buffers.
Differential Revision: https://reviews.llvm.org/D26259
llvm-svn: 286207
As proposed on llvm-dev:
http://lists.llvm.org/pipermail/llvm-dev/2016-October/106595.html
This change also fixes an API oddity where BitstreamCursor::Read() would
return zero for the first read past the end of the bitstream, but would
report_fatal_error for subsequent reads. Now we always report_fatal_error
for all reads past the end. Updated clients to check for the end of the
bitstream before reading from it.
I also needed to add padding to the invalid bitcode tests in
test/Bitcode/. This is because the streaming interface was not checking that
the file size is a multiple of 4.
Differential Revision: https://reviews.llvm.org/D26219
llvm-svn: 285773
This reverts commit r284176. It still marks some modules as invisible
that should be visible. Will follow up with the author with a test case.
llvm-svn: 284382
compiles without -fmodules-local-submodule-visibility. Original commit message:
[modules] When merging one definition into another, propagate the list of
re-exporting modules from the discarded definition to the retained definition.
llvm-svn: 284176
Summary:
This is possible now that MapVector supports move-only values.
Depends on D25404.
Reviewers: timshen
Subscribers: cfe-commits
Differential Revision: https://reviews.llvm.org/D25405
llvm-svn: 283766
Summary:
These cause us to consider all functions in-between to be __host__
__device__.
You can nest these pragmas; you just can't have more 'end's than
'begin's.
Reviewers: rsmith
Subscribers: tra, jhen, cfe-commits
Differential Revision: https://reviews.llvm.org/D24975
llvm-svn: 283677
We also need to add ObjCTypeParamTypeLoc. ObjCTypeParamType supports the
representation of "T <protocol>" where T is a type parameter. Before this,
we use TypedefType to represent the type parameter for ObjC.
ObjCTypeParamType has "ObjCTypeParamDecl *OTPDecl" and it extends from
ObjCProtocolQualifiers. It is a non-canonical type and is canonicalized
to the underlying type with the protocol qualifiers.
rdar://24619481
rdar://25060179
Differential Revision: http://reviews.llvm.org/D23079
llvm-svn: 281355
There is a bug causing pch to be validated even though -fno-validate-pch is set. This patch fixes it.
ASTReader relies on ASTReaderListener to initialize SuggestedPredefines, which is required for compilations using PCH. Before this change, PCHValidator is the default ASTReaderListener. After this change, when -fno-validate-pch is set, PCHValidator is disabled, but we need a replacement ASTReaderListener to initialize SuggestedPredefines. Class SimpleASTReaderListener is implemented for this purpose.
This change only affects -fno-validate-pch. There is no functional change if -fno-validate-pch is not set.
If -fno-validate-pch is not set, conflicts in predefined macros between pch and current compiler instance causes error.
If -fno-validate-pch is set, predefine macros in current compiler override those in pch so that compilation can continue.
Differential Revision: https://reviews.llvm.org/D24054
llvm-svn: 280842
In this mode, there is no need to load any module map and the programmer can
simply use "@import" syntax to load the module directly from a prebuilt
module path. When loading from prebuilt module path, we don't support
rebuilding of the module files and we ignore compatible configuration
mismatches.
rdar://27290316
Differential Revision: http://reviews.llvm.org/D23125
llvm-svn: 279096
With PCH+Module, sometimes compiler gives a hard error:
Module file ‘<some-file path>.pcm' is out of date and needs to be rebuilt
This happens when we have a pch importing a module and the module gets
overwritten by another compiler instance after we build the pch (one example is
that both compiler instances hash to the same pcm file but use different
diagnostic options). When we try to load the pch later on, the compiler notices
that the imported module is out of date (modification date, size do not match)
but it can't handle this out of date pcm (i.e it does not know how to rebuild
the pch).
This commit introduces a new command line option so for PCH + module, we can
turn on this option and if two compiler instances only differ in diagnostic
options, the latter instance will not invalidate the original pcm.
rdar://26675801
Differential Revision: http://reviews.llvm.org/D22773
llvm-svn: 276769
Processing update records (and loading a module, in general) might trigger
unexpected calls to the ASTWriter (being a mutation listener). Now we have a
mechanism to suppress those calls to the ASTWriter but notify other possible
mutation listeners.
Fixes https://llvm.org/bugs/show_bug.cgi?id=28332
Patch by Cristina Cristescu and me.
Reviewed by Richard Smith (D21800).
llvm-svn: 276473
we first touch any part of that module. Instead, defer them until the first
time that module is (transitively) imported. The initializer step for a module
then recursively initializes modules that its own headers imported.
For example, this avoids running the <iostream> global initializer in programs
that don't actually use iostreams, but do use other parts of the standard
library.
llvm-svn: 276159
Summary:
Space for storing the //constraint-expression// of the
//requires-clause// associated with a `TemplateParameterList` is
arranged by taking a bit out of the `NumParams` field for the purpose
of determining whether there is a //requires-clause// or not, and by
adding to the trailing objects tied to the `TemplateParameterList`. An
accessor is provided.
An appropriate argument is supplied to `TemplateParameterList::Create`
at the various call sites.
Serialization changes will addressed as the Concepts implementation
becomes more solid.
Drive-by fix:
This change also replaces the custom
`FixedSizeTemplateParameterListStorage` implementation with one that
follows the interface provided by `llvm::TrailingObjects`.
Reviewers: aaron.ballman, faisalv, rsmith
Subscribers: cfe-commits, nwilson
Differential Revision: https://reviews.llvm.org/D19322
llvm-svn: 276069
passed on the command line but never actually used. We consider a (top-level)
module to be used if any part of it is imported, either by the current
translation unit, or by any part of a top-level module that is itself used.
(Put another way, a module is used if an implicit modules build would have
loaded its .pcm file.)
llvm-svn: 275481
On Linux, if the timestamp of a header file, included in the pch, is modified, then including the pch without regenerating it causes a fatal error, which is reasonable.
On Windows the check is ifdefed out, allowing the compilation to continue in a broken state.
The root of the broken state is that, if timestamps dont match, the preprocessor will reparse a header without discarding the pch data.
This leads to "#pragma once" header to be included twice.
The reason behind the ifdefing of the check lacks documentation, and was done 6 years ago.
This change tentatively removes the ifdefing.
First part of patch proposed at:
Differential Revision: http://reviews.llvm.org/D20867
llvm-svn: 275261
This patch adds a __nth_element builtin that allows fetching the n-th type of a
parameter pack with very little compile-time overhead. The patch was inspired by
r252036 and r252115 by David Majnemer, which add a similar __make_integer_seq
builtin for efficiently creating a std::integer_sequence.
Reviewed as D15421. http://reviews.llvm.org/D15421
llvm-svn: 274316
This is essential for iterating across macros properly, which LLDB does when
loading macros from modules. A naiver version of this patch (without the
conditional) caused assertion failures in the testsuite, but this version should
be safe.
Thanks to Ben Langmuir for the refinement that made this work.
llvm-svn: 269554
This patch corresponds to reviews:
http://reviews.llvm.org/D15120http://reviews.llvm.org/D19125
It adds support for the __float128 keyword, literals and target feature to
enable it. Based on the latter of the two aforementioned reviews, this feature
is enabled on Linux on i386/X86 as well as SystemZ.
This is also the second attempt in commiting this feature. The first attempt
did not enable it on required platforms which caused failures when compiling
type_traits with -std=gnu++11.
If you see failures with compiling this header on your platform after this
commit, it is likely that your platform needs to have this feature enabled.
llvm-svn: 268898
object in C. Rather than using the DeclContext (which is very slow because it
triggers us to build a lookup table for the DeclContext), use a separate map
from identifiers to decls for this case, containing only the ones we've
actually deserialized. For convenience, this map is implemented as an
IdentifierResolver.
llvm-svn: 268817
This commit fixes the IdentifierIterator to actually include identifiers
from a PCH or precompiled preamble when there is also a global module
index. This was causing code-completion (outside of C++) and
typo-correction to be missing global identifiers defined in the
PCH/preamble. Typo-correction has been broken since we first started
using the module index, whereas code-completion only started relying on
identifier iterator in r232793.
rdar://problem/25642879
llvm-svn: 268471
a selector, the entry should be complete, containing everything introduced by
that module and all modules it imports.
Before writing out the method pool of a module, we sync up the out of date
selectors by pulling in methods for the selectors, from all modules it imports.
In ReadMethodPool, after pulling in the method pool entry for module A, this
lets us skip the modules that module A imports.
rdar://problem/25900131
llvm-svn: 268091
PCH in a relative location had a redundant relative path on the DWO
filename and the DW_AT_compilation_dir.
This patch fixes this and adds testcases for PCH in the same directory,
in a relative, and an absolute location.
rdar://problem/25537947
llvm-svn: 267740
Since this patch provided support for the __float128 type but disabled it
on all platforms by default, some platforms can't compile type_traits with
-std=gnu++11 since there is a specialization with __float128.
This reverts the patch until D19125 is approved (i.e. we know which platforms
need this support enabled).
llvm-svn: 266460
a table entry in the corresponding decl, store an offset from the current
record to the relevant CXX_BASE_SPECIFIERS record. This results in fewer
indirections and a minor .pcm file size reduction.
llvm-svn: 266266
of a table entry in the corresponding decl, store an offset from the current
record to the relevant CXX_CTOR_INITIALIZERS record. This results in fewer
indirections and a minor .pcm file size reduction.
llvm-svn: 266254
This patch corresponds to review:
http://reviews.llvm.org/D15120
It adds support for the __float128 keyword, literals and a target feature to
enable it. This support is disabled by default on all targets and any target
that has support for this type is free to add it.
Based on feedback that I've received from target maintainers, this appears to
be the right thing for most targets. I have not heard from the maintainers of
X86 which I believe supports this type. I will subsequently investigate the
impact of enabling this on X86.
llvm-svn: 266186
Putting OpenCLImageTypes.def to clangAST library violates layering requirement: "It's not OK for a Basic/ header to include an AST/ header".
This fixes the modules build.
Differential revision: http://reviews.llvm.org/D18954
Reviewers: Richard Smith, Vassil Vassilev.
llvm-svn: 266180
I. Current implementation of images is not conformant to spec in the following points:
1. It makes no distinction with respect to access qualifiers and therefore allows to use images with different access type interchangeably. The following code would compile just fine:
void write_image(write_only image2d_t img);
kernel void foo(read_only image2d_t img) { write_image(img); } // Accepted code
which is disallowed according to s6.13.14.
2. It discards access qualifier on generated code, which leads to generated code for the above example:
call void @write_image(%opencl.image2d_t* %img);
In OpenCL2.0 however we can have different calls into write_image with read_only and wite_only images.
Also generally following compiler steps have no easy way to take different path depending on the image access: linking to the right implementation of image types, performing IR opts and backend codegen differently.
3. Image types are language keywords and can't be redeclared s6.1.9, which can happen currently as they are just typedef names.
4. Default access qualifier read_only is to be added if not provided explicitly.
II. This patch corrects the above points as follows:
1. All images are encapsulated into a separate .def file that is inserted in different points where image handling is required. This avoid a lot of code repetition as all images are handled the same way in the code with no distinction of their exact type.
2. The Cartesian product of image types and image access qualifiers is added to the builtin types. This simplifies a lot handling of access type mismatch as no operations are allowed by default on distinct Builtin types. Also spec intended access qualifier as special type qualifier that are combined with an image type to form a distinct type (see statement above - images can't be created w/o access qualifiers).
3. Improves testing of images in Clang.
Author: Anastasia Stulova
Reviewers: bader, mgrang.
Subscribers: pxli168, pekka.jaaskelainen, yaxunl.
Differential Revision: http://reviews.llvm.org/D17821
llvm-svn: 265783
explicitly provided, and the module map lists a header that does not exist,
unmark the module as 'unavailable' when loading its .pcm file. (Use of the
module might still fail if the relevant headers aren't embedded, but this
behavior is now consistent with how we behave if the module map is not
provided, and with the desired behavior for embedding headers in modules.)
llvm-svn: 264664
bit from the top bit to the bottom bit, so that we don't need 6 VBR6 hunks for
each macro location. Reduces libstdc++ module size by about 1%.
llvm-svn: 264540
non-deterministic diagnostics (and non-deterministic PCH files). Check these
when building a module rather than serializing it; it's not reasonable for a
module's use to be satisfied by a definition in the user of the module.
llvm-svn: 264466
pragma ms_struct has an effect on struct decls, and the effect is serialized
correctly already. But the "is ms_struct currently on" state wasn't before
this change.
This uses the same approach as `pragma clang optimize`: When writing a module,
the state isn't serialized, only when writing a pch file.
llvm-svn: 262539
to allow arbitrary data to be associated with a parameter.
Also, fix a bug where we apparently haven't been serializing
this information for the last N years.
llvm-svn: 262278
If we didn't tell ReadOptionsBlock to allow failures then we can't
assume that the stream is not in the middle of a block if it returns
out-of-date. This was causing a crash when we tried to continue reading.
Also, it's just generally a good idea to early-exit if we're doing
implicit module builds, since we will want to immediately rebuild this
module anyway and there's no reason to waste time continuing after
failure.
rdar://problem/24114938
llvm-svn: 260563
Update the Preprocessor's VisibleModuleSet when typo-correction creates
an implicit module import so that we won't accidentally write an invalid
SourceLocation into the preamble AST. This would later lead to infinite
recursion when loading the preamble AST because we use the value in
ImportLocs to prevent visiting a module twice.
rdar://problem/24440990
llvm-svn: 260543
Per review feedback the name was wrong and it can be used outside
Objective-C.
Unfortunately, making the internal struct visible broke some ASTMatchers
tests that assumed that the first record decl would be from user code,
rather than a builtin type. I'm worried that this will also affect
users' code. So this patch adds a typedef to wrap the internal struct
and only makes the typedef visible to namelookup. This is sufficient to
allow the ASTReader to merge the decls we need without making the struct
itself visible.
rdar://problem/24425801
llvm-svn: 259734
Original message:
Make CF constant string decl visible to name lookup to fix module errors
The return type of the __builtin___*StringMakeConstantString functions
is a pointer to a struct, so we need that struct to be visible to name
lookup so that we will correctly merge multiple declarations of that
type if they come from different modules.
Incidentally, to make this visible to name lookup we need to rename the
type to __NSConstantString, since the real NSConstantString is an
Objective-C interface type. This shouldn't affect anyone outside the
compiler since users of the constant string builtins cast the result
immediately to CFStringRef.
Since this struct type is otherwise implicitly created by the AST
context and cannot access namelookup, we make this a predefined type
and initialize it in Sema.
Note: this issue of builtins that refer to types not visible to name
lookup technically also affects other builtins (e.g. objc_msgSendSuper),
but in all other cases the builtin is a library builtin and the issue
goes away if you include the library that defines the types it uses,
unlike for these constant string builtins.
rdar://problem/24425801
llvm-svn: 259721
The return type of the __builtin___*StringMakeConstantString functions
is a pointer to a struct, so we need that struct to be visible to name
lookup so that we will correctly merge multiple declarations of that
type if they come from different modules.
Incidentally, to make this visible to name lookup we need to rename the
type to __NSConstantString, since the real NSConstantString is an
Objective-C interface type. This shouldn't affect anyone outside the
compiler since users of the constant string builtins cast the result
immediately to CFStringRef.
Since this struct type is otherwise implicitly created by the AST
context and cannot access namelookup, we make this a predefined type
and initialize it in Sema.
Note: this issue of builtins that refer to types not visible to name
lookup technically also affects other builtins (e.g. objc_msgSendSuper),
but in all other cases the builtin is a library builtin and the issue
goes away if you include the library that defines the types it uses,
unlike for these constant string builtins.
rdar://problem/24425801
llvm-svn: 259624
by stripping the path. Follow-up to r258555.
This is safe because only one PCH per CU is currently supported for
module debugging.
rdar://problem/24301262
llvm-svn: 258582
Summary:
Support for OpenCL 2.0 pipe type.
This is a bug-fix version for bader's patch reviews.llvm.org/D14441
Reviewers: pekka.jaaskelainen, Anastasia
Subscribers: bader, Anastasia, cfe-commits
Differential Revision: http://reviews.llvm.org/D15603
llvm-svn: 257254
This patch attempts to fix the regressions identified when the patch was committed initially.
Thanks to Michael Liao for identifying the fix in the offloading metadata generation
related with side effects in evaluation of function arguments.
llvm-svn: 256933
Summary:
In order to offloading work properly two things need to be in place:
- a descriptor with all the offloading information (device entry functions, and global variable) has to be created by the host and registered in the OpenMP offloading runtime library.
- all the device functions need to be emitted for the device and a convention has to be in place so that the runtime library can easily map the host ID of an entry point with the actual function in the device.
This patch adds support for these two things. However, only entry functions are being registered given that 'declare target' directive is not yet implemented.
About offloading descriptor:
The details of the descriptor are explained with more detail in http://goo.gl/L1rnKJ. Basically the descriptor will have fields that specify the number of devices, the pointers to where the device images begin and end (that will be defined by the linker), and also pointers to a the begin and end of table whose entries contain information about a specific entry point. Each entry has the type:
```
struct __tgt_offload_entry{
void *addr;
char *name;
int64_t size;
};
```
and will be implemented in a pre determined (ELF) section `.omp_offloading.entries` with 1-byte alignment, so that when all the objects are linked, the table is in that section with no padding in between entries (will be like a C array). The code generation ensures that all `__tgt_offload_entry` entries are emitted in the same order for both host and device so that the runtime can have the corresponding entries in both host and device in same index of the table, and efficiently implement the mapping.
The resulting descriptor is registered/unregistered with the runtime library using the calls `__tgt_register_lib` and `__tgt_unregister_lib`. The registration is implemented in a high priority global initializer so that the registration happens always before any initializer (that can potentially include target regions) is run.
The driver flag -omptargets= was created to specify a comma separated list of devices the user wants to support so that the new functionality can be exercised. Each device is specified with its triple.
About target codegen:
The target codegen is pretty much straightforward as it reuses completely the logic of the host version for the same target region. The tricky part is to identify the meaningful target regions in the device side. Unlike other programming models, like CUDA, there are no already outlined functions with attributes that mark what should be emitted or not. So, the information on what to emit is passed in the form of metadata in host bc file. This requires a new option to pass the host bc to the device frontend. Then everything is similar to what happens in CUDA: the global declarations emission is intercepted to check to see if it is an "interesting" declaration. The difference is that instead of checking an attribute, the metadata information in checked. Right now, there is only a form of metadata to pass information about the device entry points (target regions). A class `OffloadEntriesInfoManagerTy` was created to manage all the information and queries related with the metadata. The metadata looks like this:
```
!omp_offload.info = !{!0, !1, !2, !3, !4, !5, !6}
!0 = !{i32 0, i32 52, i32 77426347, !"_ZN2S12r1Ei", i32 479, i32 13, i32 4}
!1 = !{i32 0, i32 52, i32 77426347, !"_ZL7fstatici", i32 461, i32 11, i32 5}
!2 = !{i32 0, i32 52, i32 77426347, !"_Z9ftemplateIiET_i", i32 444, i32 11, i32 6}
!3 = !{i32 0, i32 52, i32 77426347, !"_Z3fooi", i32 99, i32 11, i32 0}
!4 = !{i32 0, i32 52, i32 77426347, !"_Z3fooi", i32 272, i32 11, i32 3}
!5 = !{i32 0, i32 52, i32 77426347, !"_Z3fooi", i32 127, i32 11, i32 1}
!6 = !{i32 0, i32 52, i32 77426347, !"_Z3fooi", i32 159, i32 11, i32 2}
```
The fields in each metadata entry are (in sequence):
Entry 1) an ID of the type of metadata - right now only zero is used meaning "OpenMP target region".
Entry 2) a unique ID of the device where the input source file that contain the target region lives.
Entry 3) a unique ID of the file where the input source file that contain the target region lives.
Entry 4) a mangled name of the function that encloses the target region.
Entries 5) and 6) line and column number where the target region was found.
Entry 7) is the order the entry was emitted.
Entry 2) and 3) are required to distinguish files that have the same function name.
Entry 4) is required to distinguish different instances of the same declaration (usually templated ones)
Entries 5) and 6) are required to distinguish the particular target region in body of the function (it is possible that a given target region is not an entry point - if clause can evaluate always to zero - and therefore we need to identify the "interesting" target regions. )
This patch replaces http://reviews.llvm.org/D12306.
Reviewers: ABataev, hfinkel, tra, rjmccall, sfantao
Subscribers: FBrygidyn, piotr.rak, Hahnfeld, cfe-commits
Differential Revision: http://reviews.llvm.org/D12614
llvm-svn: 256842
than reusing the "overridden buffer" mechanism. This will allow us to make
embedded files and overridden files behave differently in future.
llvm-svn: 254121
https://gcc.gnu.org/onlinedocs/gcc/Typeof.html
Differences from the GCC extension:
* __auto_type is also permitted in C++ (but only in places where
it could appear in C), allowing its use in headers that might
be shared across C and C++, or used from C++98
* __auto_type can be combined with a declarator, as with C++ auto
(for instance, "__auto_type *p")
* multiple variables can be declared in a single __auto_type
declaration, with the C++ semantics (the deduced type must be
the same in each case)
This patch also adds a missing restriction on applying typeof to
a bit-field, which GCC has historically rejected in C (due to
lack of clarity as to whether the operand should be promoted).
The same restriction also applies to __auto_type in C (in both
GCC and Clang).
This also fixes PR25449.
Patch by Nicholas Allegra!
llvm-svn: 252690
we can't load that file due to a configuration mismatch, and implicit module
building is disabled, and the user turns off the error-by-default warning for
that situation, then fall back to textual inclusion for the module rather than
giving an error if any of its headers are included.
llvm-svn: 252114
This new builtin template allows for incredibly fast instantiations of
templates like std::integer_sequence.
Performance numbers follow:
My work station has 64 GB of ram + 20 Xeon Cores at 2.8 GHz.
__make_integer_seq<std::integer_sequence, int, 90000> takes 0.25
seconds.
std::make_integer_sequence<int, 90000> takes unbound time, it is still
running. Clang is consuming gigabytes of memory.
Differential Revision: http://reviews.llvm.org/D13786
llvm-svn: 252036
Introduce the notion of a module file extension, which introduces
additional information into a module file at the time it is built that
can then be queried when the module file is read. Module file
extensions are identified by a block name (which must be unique to the
extension) and can write any bitstream records into their own
extension block within the module file. When a module file is loaded,
any extension blocks are matched up with module file extension
readers, that are per-module-file and are given access to the input
bitstream.
Note that module file extensions can only be introduced by
programmatic clients that have access to the CompilerInvocation. There
is only one such extension at the moment, which is used for testing
the module file extension harness. As a future direction, one could
imagine allowing the plugin mechanism to introduce new module file
extensions.
llvm-svn: 251955
Use the *current* state of "is-moduleness" rather than the state at
serialization time so that if we read a builtin identifier from a module
that wasn't "interesting" to that module, we will still write it out to
a PCH that imports that module.
Otherwise, we would get mysterious "unknown builtin" errors when using
PCH+modules.
rdar://problem/23287656
llvm-svn: 251565
Summary: It breaks the build for the ASTMatchers
Subscribers: klimek, cfe-commits
Differential Revision: http://reviews.llvm.org/D13893
llvm-svn: 250827
Richard Smith