Summary:
previously we switched to llvm streams for log output, this completes
the switch for the error streams.
I also clean up the includes and remove the unused argument from
DisableAllLogChannels().
This required adding a bit of boiler plate to convert the output in the
command interpreter, but that should go away when we switch command
results to use llvm streams as well.
Reviewers: zturner, eugene
Subscribers: lldb-commits, emaste
Differential Revision: https://reviews.llvm.org/D30894
llvm-svn: 297812
about this more I realized I could make the change isolated to
whether we decide an empty accelerator table is valid or not.
<rdar://problem/30867462>
llvm-svn: 297496
HasContent. If we have a valid accelerator table which has no
content, we want to depend on that (empty) table as the authoritative
source instead of reading through all the debug info for lookups.
<rdar://problem/30867462>
llvm-svn: 297441
This was originall reverted due to some test failures in
ModuleCache and TestCompDirSymlink. These issues have all
been resolved and the code now passes all tests.
Differential Revision: https://reviews.llvm.org/D30698
llvm-svn: 297300
this reverts r297116 because it breaks the unittests and
TestCompDirSymlink. The ModuleCache unit test is trivially fixable, but
the CompDirSymlink failure is a symptom of a deeper problem: llvm's stat
functionality is not a drop-in replacement for lldb's. The former is
based on stat(2) (which does symlink resolution), while the latter is
based on lstat(2) (which does not).
This also reverts subsequent build fixes (r297128, r297120, 297117) and
r297119 (Remove FileSpec dependency on FileSystem) which builds on top
of this.
llvm-svn: 297139
This deletes LLDB's FileType enumeration and replaces all
users, and all calls to functions that check whether a file
exists etc with corresponding calls to LLVM.
Differential Revision: https://reviews.llvm.org/D30624
llvm-svn: 297116
In an effort to move the various DataBuffer / DataExtractor
classes from Core -> Utility, we have to separate the low-level
functionality from the higher level functionality. Only a
few functions required anything other than reading/writing
raw bytes, so those functions are separated out into a
more appropriate area. Specifically, Dump() and DumpHexBytes()
are moved into free functions in Core/DumpDataExtractor.cpp,
and GetGNUEHPointer is moved into a static function in the
only file that it's referenced from.
Differential Revision: https://reviews.llvm.org/D30560
llvm-svn: 296910
All references to Host and Core have been removed, so this
class can now safely be lowered into Utility.
Differential Revision: https://reviews.llvm.org/D30559
llvm-svn: 296909
This in turn triggered some fallout where other files had
been transitively picking up includes that they needed from
FileSpec.h, so I've fixed those up as well.
llvm-svn: 296855
Changes wrt. previous version:
- add #include <atomic>: fix build on windows
- add extra {} around the string literals used to initialize
llvm::StringLiteral: fix gcc build
llvm-svn: 295442
Summary:
We currently have two log channel registration mechanisms. One uses a
set of function pointers and the other one is based on the
PluginManager.
The PluginManager dependency is unfortunate, as logging
is also used in lldb-server, and the PluginManager pulls in a lot of
classes which are not used in lldb-server.
Both approach have the problem that they leave too much to do for the
user, and so the individual log channels end up reimplementing command
line argument parsing, category listing, etc.
Here, I replace the PluginManager-based approach with a one. The new API
is more declarative, so the user only needs to specify the list of list
of channels, their descriptions, etc., and all the common tasks like
enabling/disabling categories are hadled by common code. I migrate the
LogChannelDWARF (only user of the PluginManager method) to the new API.
In the follow-up commits I'll replace the other channels with something
similar.
Reviewers: clayborg, zturner, beanz
Subscribers: aprantl, lldb-commits
Differential Revision: https://reviews.llvm.org/D29895
llvm-svn: 295190
With this patch, the only dependency left is from Utility
to Host. After this is broken, Utility will finally be
standalone.
Differential Revision: https://reviews.llvm.org/D29909
llvm-svn: 295088
Summary:
This converts LLDB's logging to use llvm streams instead of
lldb_private::Stream and friends. The changes are mostly
straight-forward and amount to s/lldb_private::Stream/llvm::raw_ostream.
The part worth calling out is the rewrite of the StreamCallback class.
Previously this class contained a per-thread buffer of data written. I
assume this had something to do with it trying to make sure each log
line is delivered as a single event, instead of multiple (possibly
interleaved) events. However, this is no longer relevant as the Log
class already writes things to a temporary buffer and then delivers the
message as a single "write", so I have just removed the code in
question.
Reviewers: zturner, clayborg
Subscribers: emaste, lldb-commits, mgorny
Differential Revision: https://reviews.llvm.org/D29615
llvm-svn: 294736
Summary:
The std::call_once implementation in libstdc++ has problems on few systems: NetBSD, OpenBSD and Linux PPC. LLVM ships with a homegrown implementation llvm::call_once to help on these platforms.
This change is required in the NetBSD LLDB port. std::call_once with libstdc++ results with crashing the debugger.
Sponsored by <The NetBSD Foundation>
Reviewers: labath, joerg, emaste, mehdi_amini, clayborg
Reviewed By: labath, clayborg
Subscribers: #lldb
Tags: #lldb
Differential Revision: https://reviews.llvm.org/D29288
llvm-svn: 294202
This moves the following classes from Core -> Utility.
ConstString
Error
RegularExpression
Stream
StreamString
The goal here is to get lldbUtility into a state where it has
no dependendencies except on itself and LLVM, so it can be the
starting point at which to start untangling LLDB's dependencies.
These are all low level and very widely used classes, and
previously lldbUtility had dependencies up to lldbCore in order
to use these classes. So moving then down to lldbUtility makes
sense from both the short term and long term perspective in
solving this problem.
Differential Revision: https://reviews.llvm.org/D29427
llvm-svn: 293941
Summary:
I came across this while trying to understand what Log::Debug does. It turns out
it does not do anything, as there is no instance of someone setting a debug flag
on a stream. The same is true for the Verbose and AddPrefix flags. Removing
these will enable some cleanups in the Logging class, and it brings us closer
towards the long term goal of standardizing on llvm stream classes.
I have removed these flags and all code the code which tested for their
presence -- there wasn't much of it, mostly in SymbolFileDWARF, which is
probably going away at some point anyway.
The eBinary flag still has some users, so I am letting it life for the time
being.
Reviewers: clayborg, zturner
Subscribers: aprantl, beanz, lldb-commits
Differential Revision: https://reviews.llvm.org/D28616
llvm-svn: 291895
Also found/fixed one bug identified by this warning in
RenderScriptx86ABIFixups.cpp where a string literal was being used in an
effort to provide a name for an instruction/register, but was instead
being passed as the bool 'isVolatile' parameter.
llvm-svn: 291198
LLDB needs some minor changes to adopt PrettyStackTrace after https://reviews.llvm.org/D27683.
We remove our own SetCrashDescription() function and use LLVM-provided RAII objects instead.
We also make sure LLDB doesn't define __crashtracer_info__ which would collide with LLVM's definition.
Differential Revision: https://reviews.llvm.org/D27735
llvm-svn: 289711
This diff
1. Adds a comment to ObjectFileELF.cpp about the current
approach to determining the OS.
2. Replaces the check in SymbolFileDWARF.cpp with a more robust one.
Test plan:
Built (on Linux) a test binary linked to a c++ shared library
which contains just an implementation of a function TestFunction,
the library (the binary itself) doesn't contain ELF notes
and EI_OSABI is set to System V.
Checked in lldb that now "p TestFunction()" works fine
(and doesn't work without this patch).
Differential revision: https://reviews.llvm.org/D27380
llvm-svn: 288687
Summary:
Improve detection of global vs local variables.
Currently when a global variable is optimized out or otherwise has an unknown
location (DW_AT_location is empty) it gets reported as local.
I added two new heuristics:
- if a mangled name is present, the variable is global (or static)
- if DW_AT_location is present but invalid, the variable is global (or static)
Subscribers: lldb-commits
Differential Revision: https://reviews.llvm.org/D26908
llvm-svn: 287636
This is a large API change that removes the two functions from
StreamString that return a std::string& and a const std::string&,
and instead provide one function which returns a StringRef.
Direct access to the underlying buffer violates the concept of
a "stream" which is intended to provide forward only access,
and makes porting to llvm::raw_ostream more difficult in the
future.
Differential Revision: https://reviews.llvm.org/D26698
llvm-svn: 287152
Summary:
The only interesting part here is that TimePoint and TimeValue have different
natural string representations, which affects "target modules list" output. It
is now "2016-07-09 04:02:21.000000000", whereas previously in was
"Sat Jul 9 04:02:21 2016". I wanted to check if we're OK with that.
Reviewers: clayborg
Subscribers: lldb-commits
Differential Revision: https://reviews.llvm.org/D26275
llvm-svn: 286349
Summary:
The only usage there was in GetModificationTime(). I also took the opportunity
to move this function from FileSpec to the FileSystem class - since we are
using FileSpecs to also represent remote files for which we cannot (easily)
retrieve modification time, it makes sense to make the decision to get the
modification time more explicit.
The new function returns a llvm::sys::TimePoint<>. To aid the transition
from TimeValue, I have added a constructor to it which enables implicit
conversion from a time_point.
Reviewers: zturner, clayborg
Subscribers: mehdi_amini, tberghammer, danalbert, beanz, mgorny, lldb-commits
Differential Revision: https://reviews.llvm.org/D25392
llvm-svn: 285702
Summary:
The dependencies of our libraries (only liblldb, really) we marked as public, which caused all
their dependencies to be repeated when linking any executables to them. This is a problem because
then all the .a files could end up being linked twice, once to liblldb and once
again to to the executable linking against liblldb (lldb, lldb-mi). As it turns out,
our build actually depends on this behavior:
- on windows, lldb does not have getopt, so it pulls it from inside liblldb, even
though getopt is not a part of the exported interface of liblldb (maybe some of
the bsd variants have this problem as well)
- lldb-mi uses llvm, which again is not exported by liblldb
This change does not actually fix these problems (that is going to be a hard
one), but it does make them explicit by moving this magic from add_lldb_library
to the places the executable targets are defined. That way, I can link the
additional .a files only on targets that really need it, and the other targets
can build cleanly and make sure we don't regress further. It also fixes the
LLVM_LINK_LLVM_DYLIB build on linux.
Reviewers: zturner, beanz
Subscribers: ki.stfu, lldb-commits, mgorny
Differential Revision: https://reviews.llvm.org/D25680
llvm-svn: 284466
This updates getters and setters to use StringRef instead of
const char *. I tested the build on Linux, Windows, and OSX
and saw no build or test failures. I cannot test any BSD
or Android variants, however I expect the required changes
to be minimal or non-existant.
llvm-svn: 282079
It is a new attribute emitted by clang as a GNU extension and will
be part of Dwarf5. The purpose of the attribute is to specify a compile
unit level base value for all DW_AT_ranges to reduce the number of
relocations have to be done by the linker.
Fixes (at least partially): https://llvm.org/pr28826
Differential revision: https://reviews.llvm.org/D24514
llvm-svn: 281595
*** to conform to clang-format’s LLVM style. This kind of mass change has
*** two obvious implications:
Firstly, merging this particular commit into a downstream fork may be a huge
effort. Alternatively, it may be worth merging all changes up to this commit,
performing the same reformatting operation locally, and then discarding the
merge for this particular commit. The commands used to accomplish this
reformatting were as follows (with current working directory as the root of
the repository):
find . \( -iname "*.c" -or -iname "*.cpp" -or -iname "*.h" -or -iname "*.mm" \) -exec clang-format -i {} +
find . -iname "*.py" -exec autopep8 --in-place --aggressive --aggressive {} + ;
The version of clang-format used was 3.9.0, and autopep8 was 1.2.4.
Secondly, “blame” style tools will generally point to this commit instead of
a meaningful prior commit. There are alternatives available that will attempt
to look through this change and find the appropriate prior commit. YMMV.
llvm-svn: 280751
It's always hard to remember when to include this file, and
when you do include it it's hard to remember what preprocessor
check it needs to be behind, and then you further have to remember
whether it's windows.h or win32.h which you need to include.
This patch changes the name to PosixApi.h, which is more appropriately
named, and makes it independent of any preprocessor setting.
There's still the issue of people not knowing when to include this,
because there's not a well-defined set of things it exposes other
than "whatever is missing on Windows", but at least this should
make it less painful to fix when problems arise.
This patch depends on LLVM revision r278170.
llvm-svn: 278177
This introduces basic support for debugging OCaml binaries.
Use of the native compiler with DWARF emission support (see
https://github.com/ocaml/ocaml/pull/574) is required.
Available variables are considered as 64 bits unsigned integers,
their interpretation will be left to a OCaml-made debugging layer.
Differential revision: https://reviews.llvm.org/D22132
llvm-svn: 277443
Summary:
We were checking whether an attribute is in block form by getting the block data pointer, which
was not correct as the pointer be null even if the attribute is in block form. Other places in
the file already use the correct test.
To make this work, I've needed to add DW_FORM_exprlock to the list of "block" forms, which seems
correct as that is how we are parsing it.
Reviewers: clayborg
Subscribers: lldb-commits
Differential Revision: https://reviews.llvm.org/D22756
llvm-svn: 276735
Pavel Labath