Masked vectors which hold shift amounts when creating the following nodes:
ISD::SHL, ISD::SRL or ISD::SRA.
Instructions that use said nodes, which have had their arguments altered are
sll, srl, sra, bneg, bclr and bset.
For said instructions, the shift amount or the bit position that is
specified in the corresponding vector elements will be interpreted as the
shift amount/bit position modulo the size of the element in bits.
The problem lies in compiling with -O2 enabled, where the instructions for
formats .w and .d are not generated, but are instead optimized away.
In this case, having shift amounts that are either negative or greater than
the element bit size results in generation of incorrect results when
constant folding.
We remedy this by masking the operands for the nodes mentioned above before
actually creating them, so that the final result is correct before placed
into the constant pool.
Patch by Stefan Maksimovic.
Differential Revision: https://reviews.llvm.org/D31331
llvm-svn: 300839
From a user prospective, it forces the use of an annoying nullptr to mark the end of the vararg, and there's not type checking on the arguments.
The variadic template is an obvious solution to both issues.
Differential Revision: https://reviews.llvm.org/D31070
llvm-svn: 299949
Module::getOrInsertFunction is using C-style vararg instead of
variadic templates.
From a user prospective, it forces the use of an annoying nullptr
to mark the end of the vararg, and there's not type checking on the
arguments. The variadic template is an obvious solution to both
issues.
llvm-svn: 299925
This reverts commit r299766. This change appears to have broken the MIPS
buildbots. Reverting while I investigate.
Revert "[mips] Remove usage of debug only variable (NFC)"
This reverts commit r299769. Follow up commit.
llvm-svn: 299788
Fix the lld-x86_64-darwin13 buildbot by removing the declaration of a
debug only variable and instead moving the value into the debug statement.
llvm-svn: 299769
We have two cases here, the first one being the following instruction
selection from the builtin function:
bm(n)zi builtin -> vselect node -> bins[lr]i machine instruction
In case of bm(n)zi having an immediate which has either its high or low bits
set, a bins[lr] instruction can be selected through the selectVSplatMask[LR]
function. The function counts the number of bits set, and that value is
being passed to the bins[lr]i instruction as its immediate, which in turn
copies immediate modulo the size of the element in bits plus 1 as per specs,
where we get the off-by-one-error.
The other case is:
bins[lr]i -> vselect node -> bsel.v
In this case, a bsel.v instruction gets selected with a mask having one bit
less set than required.
Patch by Stefan Maksimovic.
Differential Revision: https://reviews.llvm.org/D30579
llvm-svn: 299768
By target hookifying getRegisterType, getNumRegisters, getVectorBreakdown,
backends can request that LLVM to scalarize vector types for calls
and returns.
The MIPS vector ABI requires that vector arguments and returns are passed in
integer registers. With SelectionDAG's new hooks, the MIPS backend can now
handle LLVM-IR with vector types in calls and returns. E.g.
'call @foo(<4 x i32> %4)'.
Previously these cases would be scalarized for the MIPS O32/N32/N64 ABI for
calls and returns if vector types were not legal. If vector types were legal,
a single 128bit vector argument would be assigned to a single 32 bit / 64 bit
integer register.
By teaching the MIPS backend to inspect the original types, it can now
implement the MIPS vector ABI which requires a particular method of
scalarizing vectors.
Previously, the MIPS backend relied on clang to scalarize types such as "call
@foo(<4 x float> %a) into "call @foo(i32 inreg %1, i32 inreg %2, i32 inreg %3,
i32 inreg %4)".
This patch enables the MIPS backend to take either form for vector types.
Reviewers: zoran.jovanovic, jaydeep, vkalintiris, slthakur
Differential Revision: https://reviews.llvm.org/D27845
llvm-svn: 299766
A number of backends (AArch64, MIPS, ARM) have been using
MCContext::reportError to report issues such as out-of-range fixup values in
their TgtAsmBackend. This is great, but because MCContext couldn't easily be
threaded through to the adjustFixupValue helper function from its usual
callsite (applyFixup), these backends ended up adding an MCContext* argument
and adding another call to applyFixup to processFixupValue. Adding an
MCContext parameter to applyFixup makes this unnecessary, and even better -
applyFixup can take a reference to MCContext rather than a potentially null
pointer.
Differential Revision: https://reviews.llvm.org/D30264
llvm-svn: 299529
This patch teaches the hazard scheduler how to handle empty blocks
when search for the next real instruction when dealing with forbidden
slots.
Reviewers: slthakur
Differential Revision: https://reviews.llvm.org/D31293
llvm-svn: 299427
Implementation of TargetInstrInfo::findCommutedOpIndices for MIPS target,
restricting commutativity to second and third operand only for
dpaadd_[su].df instructions therein.
Prior to this change, there were cases where the vector that is to be added
to the dot product of the other two could take a position other than the
first one in the instruction, generating false output in the destination
vector.
Such behavior has been noticed in the two functions generating v2i64 output
values so far. Other ones may exhibit such behavior as well, just not for
the vector operands which are present in the test at the moment.
Tests altered so that the function's first operand is a constant splat so
that it can be loaded with a ldi instruction, since that is the case in
which the erroneous instruction operand placement has occurred. We check
that the register which is present in the ldi instruction is placed as the
first operand in the corresponding dpadd instruction.
Patch by Stefan Maksimovic.
Differential Revision: https://reviews.llvm.org/D30827
llvm-svn: 299223
This patch fixes decoding of size and position for DINSM
and DINSU instructions.
Differential Revision: https://reviews.llvm.org/D31072
llvm-svn: 298593
Summary:
This class is a list of AttributeSetNodes corresponding the function
prototype of a call or function declaration. This class used to be
called ParamAttrListPtr, then AttrListPtr, then AttributeSet. It is
typically accessed by parameter and return value index, so
"AttributeList" seems like a more intuitive name.
Rename AttributeSetImpl to AttributeListImpl to follow suit.
It's useful to rename this class so that we can rename AttributeSetNode
to AttributeSet later. AttributeSet is the set of attributes that apply
to a single function, argument, or return value.
Reviewers: sanjoy, javed.absar, chandlerc, pete
Reviewed By: pete
Subscribers: pete, jholewinski, arsenm, dschuff, mehdi_amini, jfb, nhaehnle, sbc100, void, llvm-commits
Differential Revision: https://reviews.llvm.org/D31102
llvm-svn: 298393
Users often call getArgumentList().size(), which is a linear way to get
the number of function arguments. arg_size(), on the other hand, is
constant time.
In general, the fact that arguments are stored in an iplist is an
implementation detail, so I've removed it from the Function interface
and moved all other users to the argument container APIs (arg_begin(),
arg_end(), args(), arg_size()).
Reviewed By: chandlerc
Differential Revision: https://reviews.llvm.org/D31052
llvm-svn: 298010
This patch adds support for recognizing more patterns to match to DEXT and
CINS instructions.
It finds cases where multiple instructions could be replaced with a single
DEXT or CINS instruction.
For example, for the following:
define i64 @dext_and32(i64 zeroext %a) {
entry:
%and = and i64 %a, 4294967295
ret i64 %and
}
instead of generating:
0000000000000088 <dext_and32>:
88: 64010001 daddiu at,zero,1
8c: 0001083c dsll32 at,at,0x0
90: 6421ffff daddiu at,at,-1
94: 03e00008 jr ra
98: 00811024 and v0,a0,at
9c: 00000000 nop
the following gets generated:
0000000000000068 <dext_and32>:
68: 03e00008 jr ra
6c: 7c82f803 dext v0,a0,0x0,0x20
Cases that are covered:
DEXT:
1. and $src, mask where mask > 0xffff
2. zext $src zero extend from i32 to i64
CINS:
1. and (shl $src, pos), mask
2. shl (and $src, mask), pos
3. zext (shl $src, pos) zero extend from i32 to i64
Patch by Violeta Vukobrat.
Differential Revision: https://reviews.llvm.org/D30464
llvm-svn: 297832
This patches teaches the MIPS backend to accept more values for constant
splats. Previously, only 10 bit signed immediates or values that could be
loaded using an ldi.[bhwd] instruction would be acceptted. This patch relaxes
that constraint so that any constant value that be splatted is accepted.
As a result, the constant pool is used less for vector operations, and the
suite of bit manipulation instructions b(clr|set|neg)i can now be used with
the full range of their immediate operand.
Reviewers: slthakur
Differential Revision: https://reviews.llvm.org/D30640
llvm-svn: 297457
The fix introduces segfaults and clobbers the value to be stored when
the atomic sequence loops.
Revert "[Target/MIPS] Kill dead code, no functional change intended."
This reverts commit r296153.
Revert "Recommit "[mips] Fix atomic compare and swap at O0.""
This reverts commit r296134.
llvm-svn: 297380
Fix a machine verifier issue where a instruction was using a invalid
register. The return pseudo is expanded and has the return address
register added to it. The return register may have been spuriously
mark as killed earlier.
This partially resolves PR/27458
Thanks to Quentin Colombet for reporting the issue!
llvm-svn: 297372
This time with the missing files.
Similar to PR/25526, fast-regalloc introduces spills at the end of basic
blocks. When this occurs in between an ll and sc, the store can cause the
atomic sequence to fail.
This patch fixes the issue by introducing more pseudos to represent atomic
operations and moving their lowering to after the expansion of postRA
pseudos.
This resolves PR/32020.
Thanks to James Cowgill for reporting the issue!
Reviewers: slthakur
Differential Revision: https://reviews.llvm.org/D30257
llvm-svn: 296134
Similar to PR/25526, fast-regalloc introduces spills at the end of basic
blocks. When this occurs in between an ll and sc, the store can cause the
atomic sequence to fail.
This patch fixes the issue by introducing more pseudos to represent atomic
operations and moving their lowering to after the expansion of postRA
pseudos.
This resolves PR/32020.
Thanks to James Cowgill for reporting the issue!
Reviewers: slthakur
Differential Revision: https://reviews.llvm.org/D30257
llvm-svn: 296132
Previously LLVM was assuming 32-bit signed immediates which results in and with
a bitmask that has bit 31 set to incorrectly include bits 63-32 in the result.
After applying this patch I can now compile all of the FreeBSD mips assembly
code with clang.
This issue also affects the nor, slt and sltu macros and I will fix those in a
separate review.
Patch By: Alexander Richardson
Commit message reformatted by sdardis.
Reviewers: atanasyan, theraven, sdardis
Differential Revision: https://reviews.llvm.org/D30298
llvm-svn: 296125
Make the MIPS disassembler consistent with the other targets in returning
a Size of zero when the input buffer cannot contain an instruction due
to it's size. Previously it reported the minimum instruction size when
it failed due to the buffer not being big enough for an instruction
causing llvm-objdump to crash when disassembling all sections.
Reviewers: slthakur
Differential Revision: https://reviews.llvm.org/D29984
llvm-svn: 296105
This patch adjusts the most relaxed predicate of immediate operands to accept
immediate forms such as ~(0xf0000000|0x000f00000). Previously these forms
would be accepted by GAS and rejected by IAS.
This partially resolves PR/30383.
Thanks to Sean Bruno for reporting the issue!
Reviewers: slthakur, seanbruno
Differential Revision: https://reviews.llvm.org/D29218
llvm-svn: 295965
Clean up the implementation of divide macro expansion by getting rid of a
FIXME regarding magic numbers and branch instructions. Match GAS' behaviour
for expansion of ddiv / div in the two and three operand cases. Add the two
operand alias for MIPSR6. Finally, optimize macro expansion cases where the
divisior is the $zero register.
Reviewers: slthakur
Differential Revision: https://reviews.llvm.org/D29887
llvm-svn: 294960
This makes sure we get the same redefinition rules regardless of who
is printing (asm parser, codegen) and to what (asm, obj).
This fixes an unintentional regression in r293936.
llvm-svn: 294752
Summary:
The Mips target is the only user of mnemonicIsValid. This patch
moves this method from AsmMatcherEmitter.cpp to MipsAsmParser.cpp,
getting rid of the method in all other targets where it generated
warnings about an unused function.
Patch by Gonsolo.
Reviewers: craig.topper
Reviewed By: craig.topper
Subscribers: sdardis
Differential Revision: https://reviews.llvm.org/D28748
llvm-svn: 294400
Previously only the superscalar scheduled expansion of the dla macro for
MIPS64 was implemented. If assembler temporary register is not available
and the optional source register is not the destination register, synthesize
the address using the naive solution of adds and shifts.
This partially resolves PR/30383.
Thanks to Sean Bruno for reporting the issue!
Reviewers: slthakur, seanbruno
Differential Revision: https://reviews.llvm.org/D29328
llvm-svn: 294182
The .end <symbol> directive for MIPS marks the end of a symbol and sets the
symbol's size. Previously, the corresponding emitDirective handler asserted
that a function's size could be evaluated to an absolute value at that point
in time.
This cannot be done with when directives like .align have been encountered,
instead set the function's size to the corresponding symbolic expression and
let ELFObjectWriter resolve the expression to an absolute value. This avoids
a redundant call to evaluateAsAbsolute.
llvm-svn: 294012
The GAS assembler supports the ".set bopt" directive but according
to the sources it doesn't do anything. It's supposed to optimize
branches by filling the delay slot of a branch with it's target.
This patch teaches the MIPS asm parser to accept both and warn in
the case of 'bopt' that the bopt directive is unsupported.
This resolves PR/31841.
Thanks to Sean Bruno for reporting the issue!
llvm-svn: 293798
DebugInfoDWARFTests is the only user so far which initializes the
MCObjectStreamer without initializing the ASMParser. The MIPS backend
relies on the ASMParser to initialize the MipsABIInfo object and to
update the target streamer with it. This should turn the mips buildbots
green.
Reviewers: atanasyan, zoran.jovanovic
Differential Revision: https://reviews.llvm.org/D28025
llvm-svn: 293772
Petar Jovanovic