This fixes a few issues with the R52 instregexs to enable the full overlap checking
Differential Revision: https://reviews.llvm.org/D44767
llvm-svn: 328216
This extends the use of this attribute on ARM and AArch64 from
SVN r325900 (where it was only checked for fixed stack
allocations on ARM/AArch64, but for all stack allocations on X86).
This also adds a testcase for the existing use of disabling the
fixed stack probe with the attribute on ARM and AArch64.
Differential Revision: https://reviews.llvm.org/D44291
llvm-svn: 327897
This is the groundwork for adding the Armv8.2-A FP16 vector intrinsics, which
uses v4f16 and v8f16 vector operands and return values. All the moving parts
are tested with two intrinsics, a 1-operand v8f16 and a 2-operand v4f16
intrinsic. In a follow-up patch the rest of the intrinsics and tests will be
added.
Differential Revision: https://reviews.llvm.org/D44538
llvm-svn: 327839
This is similar to the check later when we remap some of the instructions from one class to a new one. But if we reuse the class we don't get to do that check.
So many CPUs have violations of this check that I had to add a flag to the SchedMachineModel to allow it to be disabled. Hopefully we can get those cleaned up quickly and remove this flag.
A lot of the violations are due to overlapping regular expressions, but that's not the only kind of issue it found.
llvm-svn: 327808
Summary:
Currently the LLVM MC assembler is able to convert e.g.
vmov.i32 d0, #0xabababab
(which is technically invalid) into a valid instruction
vmov.i8 d0, #0xab
this patch adds support for vmov.i64 and for cases with the resulting
load types other than i8, e.g.:
vmov.i32 d0, #0xab00ab00 ->
vmov.i16 d0, #0xab00
Reviewers: olista01, rengolin
Reviewed By: rengolin
Subscribers: rengolin, javed.absar, kristof.beyls, rogfer01, llvm-commits
Differential Revision: https://reviews.llvm.org/D44467
llvm-svn: 327709
Summary:
Currently the check is incorrect and the following invalid
instruction is accepted and incorrectly assembled:
vmov.i32 d2, #0x00a500a6
This patch fixes the issue.
Reviewers: olista01, rengolin
Reviewed By: rengolin
Subscribers: SjoerdMeijer, javed.absar, rogfer01, llvm-commits, kristof.beyls
Differential Revision: https://reviews.llvm.org/D44460
llvm-svn: 327704
This implements lowering of SELECT_CC for f16s, which enables
codegen of VSEL with f16 types.
Differential Revision: https://reviews.llvm.org/D44518
llvm-svn: 327695
r327171 "Improve Dependency analysis when doing multi-node Instruction Selection"
r328170 "[DAG] Enforce stricter NodeId invariant during Instruction selection"
Reverting patch as NodeId invariant change is causing pathological
increases in compile time on PPC
llvm-svn: 327197
Instruction Selection makes use of the topological ordering of nodes
by node id (a node's operands have smaller node id than it) when doing
cycle detection. During selection we may violate this property as a
selection of multiple nodes may induce a use dependence (and thus a
node id restriction) between two unrelated nodes. If a selected node
has an unselected successor this may allow us to miss a cycle in
detection an invalid selection.
This patch fixes this by marking all unselected successors of a
selected node have negated node id. We avoid pruning on such negative
ids but still can reconstruct the original id for pruning.
In-tree targets have been updated to replace DAG-level replacements
with ISel-level ones which enforce this property.
This preemptively fixes PR36312 before triggering commit r324359 relands
Reviewers: craig.topper, bogner, jyknight
Subscribers: arsenm, nhaehnle, javed.absar, llvm-commits, hiraditya
Differential Revision: https://reviews.llvm.org/D43198
llvm-svn: 327170
This patch handling:
Enable parsing of raw encodings of system registers .
Allows UNPREDICTABLE sysregs to be decoded to a raw number in the same way that disasslib does, rather than llvm crashing.
Disassemble msr/mrs with unpredictable sysregs as SoftFail.
Fix regression due to SoftFailing some encodings.
Patch by Chris Ryder
Differential revision:https://reviews.llvm.org/D43374
llvm-svn: 326803
These instructions require that the two S registers are adjacent (but not the R
registers), because only the first register is included in the encoding, but we
were not checking this in the assembler.
Differential revision: https://reviews.llvm.org/D44084
llvm-svn: 326696
When an Armv6m function dynamically re-aligns the stack, access to incoming
stack arguments (and to stack area, allocated for register varargs) is done via
SP, which is incorrect, as the SP is offset by an unknown amount relative to the
value of SP upon function entry.
This patch fixes it, by making access to "fixed" frame objects be done via FP
when the function needs stack re-alignment. It also changes the access to
"fixed" frame objects be done via FP (instead of using R6/BP) also for the case
when the stack frame contains variable sized objects. This should allow more
objects to fit within the immediate offset of the load instruction.
All of the above via a small refactoring to reuse the existing
`ARMFrameLowering::ResolveFrameIndexReference.`
Differential Revision: https://reviews.llvm.org/D43566
llvm-svn: 326584
Code generation of VLD3, VLD4, VST3 and VST4 with register writeback is
broken due to 2 separate bugs:
1) VLD1d64TPseudoWB_register and VLD1d64QPseudoWB_register are missing
rules to expand them to non pseudo MIR. These are selected for
ARMISD::VLD3_UPD/VLD4_UPD with v1i64 vectors in SelectVLD.
2) Selection of the right VLD/VST instruction is broken for load and
store of 3 and 4 v1i64 vectors. SelectVLD and SelectVST are called
with MIR opcode for fixed writeback (ie increment is access size)
and call getVLDSTRegisterUpdateOpcode() to select an opcode with
register writeback if base register update is of a different size.
Since getVLDSTRegisterUpdateOpcode() only knows about
VLD1/VLD2/VST1/VST2 the call is currently conditional on the number
of element in the vector.
However, VLD1/VST1 is selected by SelectVLD/SelectVST's caller for
load and stores of 3 or 4 v1i64 vectors. Therefore the opcode is not
updated which later lead to a fixed writeback instruction being
constructed with an extra operand for the register writeback.
This patch addresses the two issues as follows:
- it adds the necessary mapping from VLD1d64TPseudoWB_register and
VLD1d64QPseudoWB_register to VLD1d64Twb_register and
VLD1d64Qwb_register respectively. Like for the existing _fixed
variants, the cost of these is bumped for unaligned access.
- it changes the logic in SelectVLD and SelectVSD to call isVLDfixed
and isVSTfixed respectively to decide whether the opcode should be
updated. It also reworks the logic and comments for pushing the
writeback offset operand and r0 operand to clarify the logic:
writeback offset needs to be pushed if it's a register writeback,
r0 needs to be pushed if not and the instruction is a
VLD1/VLD2/VST1/VST2.
Reviewers: rengolin, t.p.northover, samparker
Reviewed By: samparker
Patch by Thomas Preud'homme <thomas.preudhomme@arm.com>
Differential Revision: https://reviews.llvm.org/D42970
llvm-svn: 326570
Emulated TLS is enabled by llc flag -emulated-tls,
which is passed by clang driver.
When llc is called explicitly or from other drivers like LTO,
missing -emulated-tls flag would generate wrong TLS code for targets
that supports only this mode.
Now use useEmulatedTLS() instead of Options.EmulatedTLS to decide whether
emulated TLS code should be generated.
Unit tests are modified to run with and without the -emulated-tls flag.
Differential Revision: https://reviews.llvm.org/D42999
llvm-svn: 326341
Summary:
Expressions of the form x < 0 ? 0 : x; and x < -1 ? -1 : x can be lowered using bit-operations instead of branching or conditional moves
In thumb-mode this results in a two-instruction sequence, a shift followed by a bic or or while in ARM/thumb2 mode that has flexible second operand the shift can be folded into a single bic/or instructions. In most cases this results in smaller code and possibly less branches, and in no case larger than before.
Patch by Martin Svanfeldt
Reviewers: fhahn, pbarrio, rogfer01
Reviewed By: pbarrio, rogfer01
Subscribers: chrib, yroux, eugenis, efriedma, rogfer01, aemerson, javed.absar, kristof.beyls, llvm-commits
Differential Revision: https://reviews.llvm.org/D42574
llvm-svn: 326333
We were always setting the block alignment to 2 bytes in Thumb mode
and 4-bytes in ARM mode (r325754, and r325012), but this could cause
reducing the block alignment when it already had been aligned (e.g.
in Thumb mode when the block is a CPE that was already 4-byte aligned).
Patch by Momchil Velikov, I've only added a test.
Differential Revision: https://reviews.llvm.org/D43777
llvm-svn: 326232
Currently we assert that only non target specific opcodes can have
missing RegisterClass constraints in the MCDesc. The backend can have
instructions with register operands but don't have RegisterClass
constraints (say using unknown_class) in which case the instruction
defining the register will constrain it.
Change the assert to only fire if a def has no regclass.
https://reviews.llvm.org/D43409
llvm-svn: 326142
Summary:
Add a target option AllowRegisterRenaming that is used to opt in to
post-register-allocation renaming of registers. This is set to 0 by
default, which causes the hasExtraSrcRegAllocReq/hasExtraDstRegAllocReq
fields of all opcodes to be set to 1, causing
MachineOperand::isRenamable to always return false.
Set the AllowRegisterRenaming flag to 1 for all in-tree targets that
have lit tests that were effected by enabling COPY forwarding in
MachineCopyPropagation (AArch64, AMDGPU, ARM, Hexagon, Mips, PowerPC,
RISCV, Sparc, SystemZ and X86).
Add some more comments describing the semantics of the
MachineOperand::isRenamable function and how it is set and maintained.
Change isRenamable to check the operand's opcode
hasExtraSrcRegAllocReq/hasExtraDstRegAllocReq bit directly instead of
relying on it being consistently reflected in the IsRenamable bit
setting.
Clear the IsRenamable bit when changing an operand's register value.
Remove target code that was clearing the IsRenamable bit when changing
registers/opcodes now that this is done conservatively by default.
Change setting of hasExtraSrcRegAllocReq in AMDGPU target to be done in
one place covering all opcodes that have constant pipe read limit
restrictions.
Reviewers: qcolombet, MatzeB
Subscribers: aemerson, arsenm, jyknight, mcrosier, sdardis, nhaehnle, javed.absar, tpr, arichardson, kristof.beyls, kbarton, fedor.sergeev, asb, rbar, johnrusso, simoncook, jordy.potman.lists, apazos, sabuasal, niosHD, escha, nemanjai, llvm-commits
Differential Revision: https://reviews.llvm.org/D43042
llvm-svn: 325931
Fixup to rL325573 for large xor constants.
Thanks to Eli Friedman for the catch.
Differential revision: https://reviews.llvm.org/D43549
llvm-svn: 325761
This is a follow up of r325012, that allowed half types in constant pools.
Proper alignment was enforced when a big basic block was split up, but not when
a CPE was placed before/after a block; the successor block had the wrong
alignment.
Differential Revision: https://reviews.llvm.org/D43580
llvm-svn: 325754
We can always convert xor %a, -1 into MVN, even in thumb 1 where the -1
would not otherwise be considered a cheap constant. This prevents the
-1's from being pulled out into constants and potentially hoisted.
Differential Revision: https://reviews.llvm.org/D43451
llvm-svn: 325573
Enable multiple COPY hints to eliminate more COPYs during register allocation.
Note that this is something all targets should do, see
https://reviews.llvm.org/D38128.
Review: Eli Friedman
llvm-svn: 325327
This patch combines some cases of ARMISD::CMOV for integers that arise in comparisons of the form
a != b ? x : 0
a == b ? 0 : x
and that currently (e.g. in Thumb1) are emitted as branches.
Differential Revision: https://reviews.llvm.org/D34515
llvm-svn: 325323
Summary:
In LLVM, 't' selects a floating-point/SIMD register and only supports
32-bit values. This is appropriately documented in the LLVM Language
Reference Manual. However, this behaviour diverges from that of GCC, where
't' selects the s0-s31 registers and its qX and dX variants depending on
additional operand modifiers (q/P).
For example, the following C code:
#include <arm_neon.h>
float32x4_t a, b, x;
asm("vadd.f32 %0, %1, %2" : "=t" (x) : "t" (a), "t" (b))
results in the following assembly if compiled with GCC:
vadd.f32 s0, s0, s1
whereas LLVM will show "error: couldn't allocate output register for
constraint 't'", since a, b, x are 128-bit variables, not 32-bit.
This patch extends the use of 't' to mean that of GCC, thus allowing
selection of the lower Q vector regs and their D/S variants. For example,
the earlier code will now compile as:
vadd.f32 q0, q0, q1
This behaviour still differs from that of GCC but I think it is actually
more correct, since LLVM picks up the right register type based on the
datatype of x, while GCC would need an extra operand modifier to achieve
the same result, as follows:
asm("vadd.f32 %q0, %q1, %q2" : "=t" (x) : "t" (a), "t" (b))
Since this is only an extension of functionality, existing code should not
be affected by this change. Note that operand modifiers q/P are already
supported by LLVM, so this patch should suffice to support inline
assembly with constraint 't' originally built for GCC.
Reviewers: grosbach, rengolin
Reviewed By: rengolin
Subscribers: rogfer01, efriedma, olista01, aemerson, javed.absar, eraman, kristof.beyls, llvm-commits
Differential Revision: https://reviews.llvm.org/D42962
llvm-svn: 325244
Change ARMConstantIslandPass to:
- accept f16 literals as litpool entries,
- if the litpool needs to be inserted in the middle of a big block, then we
need to 4-byte align the next instruction in ARM mode.
Differential Revision: https://reviews.llvm.org/D42784
llvm-svn: 325012
This change is part of step five in the series of changes to remove alignment argument from
memcpy/memmove/memset in favour of alignment attributes. In particular, this changes
ARMFastISel to cease using the old getAlignment() API of MemoryIntrinsic in favour of getting
source & dest specific alignments through the new API.
Steps:
Step 1) Remove alignment parameter and create alignment parameter attributes for
memcpy/memmove/memset. ( rL322965, rC322964, rL322963 )
Step 2) Expand the IRBuilder API to allow creation of memcpy/memmove with differing
source and dest alignments. ( rL323597 )
Step 3) Update Clang to use the new IRBuilder API. ( rC323617 )
Step 4) Update Polly to use the new IRBuilder API. ( rL323618 )
Step 5) Update LLVM passes that create memcpy/memmove calls to use the new IRBuilder API,
and those that use use MemIntrinsicInst::[get|set]Alignment() to use [get|set]DestAlignment()
and [get|set]SourceAlignment() instead. ( rL323886, rL323891, rL324148, rL324273, rL324278,
rL324384, rL324395, rL324402, rL324626, rL324642, rL324653, rL324654, rL324773, rL324774 )
Step 6) Remove the single-alignment IRBuilder API for memcpy/memmove, and the
MemIntrinsicInst::[get|set]Alignment() methods.
Reference
http://lists.llvm.org/pipermail/llvm-dev/2015-August/089384.htmlhttp://lists.llvm.org/pipermail/llvm-commits/Week-of-Mon-20151109/312083.html
llvm-svn: 324781
ARMDisassembler now depends on the banked register tables in ARMUtils, so the
LLVMBuild.txt needed updating to reflect this.
Original commit mesage:
[ARM] Fix disassembly of invalid banked register moves
When disassembling banked register move instructions, we don't have an
assembly syntax for the unallocated register numbers, so we have to
return Fail rather than SoftFail. Previously we were returning SoftFail,
then crashing in the InstPrinter as we have no way to represent these
encodings in an assembly string.
This also switches the decoder to use the table-generated list of banked
registers, removing the duplicated list of encodings.
Differential revision: https://reviews.llvm.org/D43066
llvm-svn: 324606
The broken bot (clang-ppc64le-linux-multistage) is doign a shared-object build,
so I guess using lookupBankedRegByEncoding in the disassembler is a layering
violation?
llvm-svn: 324604
When disassembling banked register move instructions, we don't have an
assembly syntax for the unallocated register numbers, so we have to
return Fail rather than SoftFail. Previously we were returning SoftFail,
then crashing in the InstPrinter as we have no way to represent these
encodings in an assembly string.
This also switches the decoder to use the table-generated list of banked
registers, removing the duplicated list of encodings.
Differential revision: https://reviews.llvm.org/D43066
llvm-svn: 324600
This is a follow up of r324321, adding a match pattern for mov with a FP16
immediate (also fixing operand vfp_f16imm that wasn't even compiling).
Differential Revision: https://reviews.llvm.org/D42973
llvm-svn: 324456
Craig Topper