We already do this for 64-bit when it won't fit into a 64-bit AND/TEST's immediate field. This adds an additional qualifier to do it for any single bit constant larger than 8-bits under optsize
Differential Revision: https://reviews.llvm.org/D43346
llvm-svn: 325290
We can use PACKSS to saturate each stage of the chain: PACKSSDW down to [-32768,32767] and then PACKSSWB to [-128,127].
PACKUS is a little trickier and will be handled in a separate patch.
llvm-svn: 325235
Try to keep PACK*SDW/PACK*SWB as wide as possible, this helps ComputeNumSignBits as it can only peek through bitcasts to wider types, pre-AVX2 codegen was already doing this as it could peek through bitcasts/subvectors more easily than AVX2 could through shuffles.
This shouldn't affect existing results as calls to truncateVectorWithPACK ensure we have enough sign bits to pack to the same value, but it should make it possible to use truncateVectorWithPACK chains to perform saturation in combineTruncateWithSat with a future patch.
llvm-svn: 325149
While the AVX512 VTRUNCS/VTRUNCUS instructions require legal types, truncateVectorWithPACK handles cases with multiples of legal types through splitting/concatenation. So we just need to ensure that the src/dst scalar types are correct and leave truncateVectorWithPACK to handle the rest of it.
llvm-svn: 325127
Summary:
Instead of solving the hard problem of how to pass the callee to the indirect
jump thunk without a register, just use a CSR. At a call boundary, there's
nothing stopping us from using a CSR to hold the callee as long as we save and
restore it in the prologue.
Also, add tests for this mregparm=3 case. I wrote execution tests for
__llvm_retpoline_push, but they never got committed as lit tests, either
because I never rewrote them or because they got lost in merge conflicts.
Reviewers: chandlerc, dwmw2
Subscribers: javed.absar, kristof.beyls, hiraditya, llvm-commits
Differential Revision: https://reviews.llvm.org/D43214
llvm-svn: 325049
ISD::ADD implies individual vector element addition with no carries between elements. But for a vXi1 type that would be the same as XOR. And we already turn ISD::ADD into ISD::XOR for all vXi1 types during lowering. So the ISD::ADD pattern would never be able to match anyway.
KADD is different, it adds the elements but also propagates a carry between them. This just a way of doing an add in k-register without bitcasting to the scalar domain. There's still no way to match the pattern, but at least its not obviously wrong.
llvm-svn: 324861
Summary:
Currently we only use min/max to help with ule/uge compares because it removes an invert of the result that would otherwise be needed. But we can also use it for ult/ugt compares if it will prevent the need for a sign bit flip needed to use pcmpgt at the cost of requiring an invert after the compare.
I also refactored the code so that the max/min code is self contained and does its own return instead of setting up a flag to manipulate the rest of the function's behavior.
Most of the test cases look ok with this. I did notice that we added instructions when one of the operands being sign flipped is a constant vector that we were able to constant fold the flip into.
I also noticed that sometimes the SSE min/max clobbers a register that is needed after the compare. This resulted in an extra move being inserted before the min/max to preserve the register. We could try to detect this and switch from min to max and change the compare operands to use the operand that gets reused in the compare.
Reviewers: spatel, RKSimon
Reviewed By: RKSimon
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D42935
llvm-svn: 324842
This allows us to recognise more saturation patterns and also simplify some MINMAX codegen that was failing to combine CMPGE comparisons to a legal CMPGT.
Differential Revision: https://reviews.llvm.org/D43014
llvm-svn: 324837
This patch adds a new function attribute "required-vector-width" that can be set by the frontend to indicate the maximum vector width present in the original source code. The idea is that this would be set based on ABI requirements, intrinsics or explicit vector types being used, maybe simd pragmas, etc. The backend will then use this information to determine if its save to make 512-bit vectors illegal when the preference is for 256-bit vectors.
For code that has no vectors in it originally and only get vectors through the loop and slp vectorizers this allows us to generate code largely similar to our AVX2 only output while still enabling AVX512 features like mask registers and gather/scatter. The loop vectorizer doesn't always obey TTI and will create oversized vectors with the expectation the backend will legalize it. In order to avoid changing the vectorizer and potentially harm our AVX2 codegen this patch tries to make the legalizer behavior similar.
This is restricted to CPUs that support AVX512F and AVX512VL so that we have good fallback options to use 128 and 256-bit vectors and still get masking.
I've qualified every place I could find in X86ISelLowering.cpp and added tests cases for many of them with 2 different values for the attribute to see the codegen differences.
We still need to do frontend work for the attribute and teach the inliner how to merge it, etc. But this gets the codegen layer ready for it.
Differential Revision: https://reviews.llvm.org/D42724
llvm-svn: 324834
We promote these via a DAG combine now before lowering gets the chance.
Also remove the v2i1 custom handling since it will no longer be triggered.
llvm-svn: 324833
These were added as part of the refactoring for prefer vector width. At the time I thought the hasAVX512 here would be replaced with "allow 512 bit vectors" so that it would read "allow 512 bit vectors OR VLX". But now the plan is to only give the option of disabling 512 bit vectors when VLX is enabled. So we don't need this qualification at all
llvm-svn: 324831
Summary:
This patch changes the signature of the avx512 packed fp compare intrinsics to return a vXi1 vector and no longer take a mask as input. The casts to scalar type will now need to be explicit in the IR. The masking node will now be an explicit and in the IR.
This makes the intrinsic look much more similar to an fcmp instruction that we wish we could use for these but can't. We already use icmp instructions for integer compares.
Previously the lowering step of isel would turn the intrinsic into an X86 specific ISD node and a emit the masking nodes as well as some bitcasts. This means DAG combines can't see the vXi1 type until somewhat late, making it more difficult to combine out gpr<->mask transition sequences. By exposing the vXi1 type explicitly in the IR and initial SelectionDAG we give earlier DAG combines and even InstCombine the chance to see it and optimize it.
This should make any issues with gpr<->mask sequences the same between integer and fp. Meaning we only have to fix them once.
Reviewers: spatel, delena, RKSimon, zvi
Reviewed By: RKSimon
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D43137
llvm-svn: 324827
Undef VLX, getSetCCResultType returns v2i1/v4i1 for v2f32/v4f32 so default type legalization will end up changing the setcc result type back to vXi1 if it had been extended. The resulting extend gets messed up further by type legalization and is difficult to recombine back to (v4i32 (setcc (v4f32))) after legalization.
I went ahead and enabled this for SSE2 and later since its always the result we want and this helps type legalization get there in less steps.
llvm-svn: 324822
This prevents extends of masks being introduced during lowering where it become difficult to combine them out.
There are a few oddities in here.
We sometimes concatenate two k-registers produced by two compares, sign_extend the combined pair, then extract two halves. This worked better previously because the sign_extend wasn't created until after the fp_to_sint was split which led to a split sign_extend being created.
We probably also need to custom type legalize (v2i32 (sext v2i1)) via widening.
llvm-svn: 324820
This avoids a constant pool load to create 1.
The int->float are showing converts to mask and back. We probably need to widen inputs to sint_to_fp/uint_to_fp before type legalization.
llvm-svn: 324805
Previously we extracted two subvectors and concatenate. But the concatenate will be lowered to two insert subvectors. Then DAG combine will merge once of the inserts and one of the extracts back into the original vector. We might as well just directly use one extract and one insert.
llvm-svn: 324710
This regresses a couple cases in the shuffle combining test. But those cases use intrinsics that InstCombine knows how to turn into a generic shuffle earlier. This should give opportunities to fold this earlier in InstCombine or DAG combine.
llvm-svn: 324709
Most vxi1 constant build vectors have to be implemented in the scalar domain anyway so we'll probably end up with a cast there later. But by then its too late to do the combine to get rid of it.
llvm-svn: 324662
The KTEST instruction sets the C flag if the result of anding both operands together is all 1s. We can use this to lower (icmp eq/ne (bitcast (vXi1 X), -1)
Differential Revision: https://reviews.llvm.org/D42772
llvm-svn: 324577
Summary:
KTEST has weird flag behavior. The Z flag is set for all bits in the AND of the k-registers being 0, and the C flag is set for all bits being 1. All other flags are cleared.
We currently emit this instruction in EmitTEST and don't check the condition code. This can lead to strange things like using the S flag after a KTEST for a signed compare.
The domain reassignment pass can also transform TEST instructions into KTEST and is not protected against the flag usage either. For now I've disabled this part of the domain reassignment pass. I tried to comment out the checks in the mir test so that we could recover them later, but I couldn't figure out how to get that to work.
This patch moves the KTEST handling into LowerSETCC and now creates a ktest+x86setcc. I've chosen this approach because I'd like to add support for the C flag for all ones in a followup patch. To do that requires that I can rewrite the condition code going in the x86setcc to be different than the original SETCC condition code.
This fixes PR36182. I'll file a PR to fix domain reassignment once this goes in. Should this be merged to 6.0?
Reviewers: spatel, guyblank, RKSimon, zvi
Reviewed By: guyblank
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D42770
llvm-svn: 324576
We were doing a lot of whitelisting of what we handle in these routines, but setOperationAction constrains what we can get here. So just add some asserts and prune the unreachable paths.
llvm-svn: 324538
that happened to end up in GCC.
This is really unfortunate, as the names don't have much rhyme or reason
to them. Originally in the discussions it seemed fine to rely on aliases
to map different names to whatever external thunk code developers wished
to use but there are practical problems with that in the kernel it turns
out. And since we're discovering this practical problems late and since
GCC has already shipped a release with one set of names, we are forced,
yet again, to blindly match what is there.
Somewhat rushing this patch out for the Linux kernel folks to test and
so we can get it patched into our releases.
Differential Revision: https://reviews.llvm.org/D42998
llvm-svn: 324449
X86 currently has a late DAG combine after cttz/ctlz are turned into BSR+BSF+CMOV to detect this and remove the CMOV. But we should be able to do this much earlier and avoid creating the cmov all together.
For the changed AMDGPU test case it appears that previously the i8 cttz was type legalized to i16 which introduced an OR with 256 in order to limit the result to 8 on the widened type. At this point the result is known to never be zero, but nothing checked that. Then operation legalization is told to promote all i16 cttz to i32. This introduces an extend and a truncate and another OR with 65536 to limit the result to 16. With the DAG combiner change we are able to prevent the creation of the second OR since the opcode will have been changed to cttz_zero_undef after the first OR. I the lack of the OR caused the instruction to change to v_ffbl_b32_sdwa
Differential Revision: https://reviews.llvm.org/D42985
llvm-svn: 324427
Followup to D42544 that matches PACKUSWB cases for non-AVX512, SSE and PACKUSDW cases will have to wait until we can add support for general SMIN/SMAX matching.
llvm-svn: 324347
Followup to D42544 that matches PACKSSWB cases for non-AVX512, SSE and PACKSSDW cases will have to wait until we can add support for general SMIN/SMAX matching.
llvm-svn: 324339
We now allow all signed comparisons and not equal. The complement that needs to be added for this is no worse than the extend. And the vector output forms of pcmpeq/pcmpgt have better latency than the k-register version on SKX.
llvm-svn: 324294
We always created X86ISD::SHUF128 with a 64-bit element type so we can use isel patterns to detect a bitconvert to 32-bit to handle masking.
The test changes are because we also match the bitconvert even if there is no masking. This leads to unnecessary isel pattern, but it requires more multiclass hackery in tablegen to get rid of it.
llvm-svn: 324205
This reduces the number of transitions between k-registers and GPRs, reducing the number of instructions.
There's still some room for improvement to remove more transitions, but this is a good start.
llvm-svn: 324184
Clang already stopped using these a couple months ago.
The test cases aren't great as there is nothing forcing the operations to stay in k-registers so some of them moved back to scalar ops due to the bitcasts being moved around.
llvm-svn: 324177
This is running pre-legalize, we should try to use target independent nodes. This will give the best opportunity for target independent optimizations.
llvm-svn: 324147
Every instruction that has the word TEST in its name seems to have been buried into EmitTest. But that code is largely concerned with trying to reuse the flags from instructions that update flags in a pretty normal way.
PTEST/TESTP/KTEST do not update flags in a normal way. They only update Z and C and the C flag update is non-standard. Rather than try to bend EmitTest's already complex logic to accomodate this, just move the call up to LowerSETCC and replicate the few pre-checks that are needed.
While there add a FIXME for using the C flag for checking for all 1s which we definitely couldn't do from EmitTEST.
llvm-svn: 324029
This allows us to use PSHUFB for v8i16/v4i32 and VPERMD/PERMPS for v4i64/v4f64 variable shuffles.
Differential Revision: https://reviews.llvm.org/D42487
llvm-svn: 323987
Summary: Now that v2i1/v4i1 are legal without VLX. And v32i1 is legalized by splitting rather than widening. And isVectorLoadExtDesirable returns false for vXi1. It appears this handling is dead because the operations simply don't exist.
Reviewers: RKSimon, zvi, guyblank, delena, spatel
Reviewed By: delena
Subscribers: llvm-commits, rengolin
Differential Revision: https://reviews.llvm.org/D42781
llvm-svn: 323983
Summary:
EmitTest sometimes creates X86ISD::AND specifically to hide the AND from DAG combine. But this prevents isel patterns that look for (cmp (and X, Y), 0) from being able to see it. So we end up with an AND and a TEST. The TEST gets removed by compare instruction optimization during the peephole pass.
This patch attempts to fix this by converting X86ISD::AND with no flag users back into ISD::AND during the DAG preprocessing just before isel.
In order to do this correctly I had to make the X86ISD::AND node created by EmitTest in this case really have a flag output. Which arguably it should have had anyway so that the number of operands would be consistent for the opcode in all cases. Then I had to modify the ReplaceAllUsesWith to understand that we might be looking at an instruction with 2 outputs. Though in this case there are no uses to replace since we just created the node, but that's what the code did before so I just made it keep working.
Reviewers: spatel, RKSimon, niravd, deadalnix
Reviewed By: RKSimon
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D42764
llvm-svn: 323982
Summary:
This change expands the amount of registers stashed by the entry and
`__xray_CustomEvent` trampolines.
We've found that since the `__xray_CustomEvent` trampoline calls can show up in
situations where the scratch registers are being used, and since we don't
typically want to affect the code-gen around the disabled
`__xray_customevent(...)` intrinsic calls, that we need to save and restore the
state of even the scratch registers in the handling of these custom events.
Reviewers: pcc, pelikan, dblaikie, eizan, kpw, echristo, chandlerc
Reviewed By: echristo
Subscribers: chandlerc, echristo, hiraditya, davide, dblaikie, llvm-commits
Differential Revision: https://reviews.llvm.org/D40894
llvm-svn: 323940
This code currently uses isSimple and getSizeInBits in an attempt to prune types. But isSimple will return true for any type that any target supports natively. I don't think that's a good way to prune types. I also don't think the dest element type checks are very robust since we didn't do an isSimple check on the dest type.
This patch adds a check for the input type being legal to the one caller that didn't already check that. Then we explicitly check the element types for the destination are i8, i16, or i32
Differential Revision: https://reviews.llvm.org/D42706
llvm-svn: 323924
Similar to D42437, XOP supports variable shift for v16i8/v8i16/v4i32/v2i64 types.
Differential Revision: https://reviews.llvm.org/D42526
llvm-svn: 323797
We can use the same input for both operands to get a free compare with zero.
We already use this trick in a couple places where we explicitly create PTESTM with the same input twice. This generalizes it.
I'm hoping to remove the ISD opcodes and move this to isel patterns like we do for scalar cmp/test.
llvm-svn: 323605
Legalization is still biased to turn LT compares in to GT by swapping operands to avoid needing extra isel patterns to commute.
I'm hoping to remove TESTM/TESTNM next and this should simplify that by making EQ/NE more similar.
llvm-svn: 323604
If broadcasting from another shuffle, attempt to simplify it.
We can probably generalize this a lot more (embedding in combineX86ShufflesRecursively), but BROADCAST is one of the more troublesome as it accepts inputs of different sizes to the result.
llvm-svn: 323602
X86ISelLowering.cpp:34130:5: error: return type 'llvm::SDValue' must
match previous return type 'const llvm::SDValue' when lambda expression
has unspecified explicit return type
llvm-svn: 323557
We currently coalesce v4i32 extracts from all 4 elements to 2 v2i64 extracts + shifts/sign-extends.
This seems to have been added back in the days when we tended to spill vectors and reload scalars, or ended up with repeated shuffles moving everything down to 0'th index. I don't think either of these are likely these days as we have better EXTRACT_VECTOR_ELT and VECTOR_SHUFFLE handling, and the existing code tends to make it very difficult for various vector and load combines.
Differential Revision: https://reviews.llvm.org/D42308
llvm-svn: 323541
Type legalization would prevent any i64 operands to the build_vector from existing before we get here. The coverage bots show this code as uncovered.
llvm-svn: 323506
The original autoupgrade for kunpck intrinsics used a bitcasted scalar shift, or, and. This combine would turn this into a concat_vectors. Now the kunpck intrinsics are autoupgraded to a vector shuffle that will become a concat_vectors.
llvm-svn: 323504
This listed all legal 128-bit integer types individually, but since we already know we have a legal type and its integer, we can just check is128BitVector.
llvm-svn: 323502
As discussed in D41484, PMADDWD for 'zero extended' vXi32 is nearly always a better option than PMULLD:
On SNB it will result in code that isn't any faster, but not any slower so we may as well keep it.
On KNL it only has half the throughput, so I've disabled it on there - ideally there'd be a better way than this.
Differential Revision: https://reviews.llvm.org/D42258
llvm-svn: 323367
There are a couple tricky things with this patch.
I had to add an override of isVectorLoadExtDesirable to stop DAG combine from combining sign_extend with loads after legalization since we legalize sextload using a load+sign_extend. Overriding this hook actually prevents a lot sextloads from being created in the first place.
I also had to add isel patterns because DAG combine blindly combines sign_extend+truncate to a smaller sign_extend which defeats what legalization was trying to do.
Differential Revision: https://reviews.llvm.org/D42407
llvm-svn: 323301
Minor refactor to make it possible for LowerBUILD_VECTORAsVariablePermute to be used with a wider variety of shuffles op and types.
I'd have liked to add v4i32/v4f32 support as well but we don't see v4i32 index extractions at the moment (which is why I created D42308)
After this I intend to begin adding scaling support for PSHUFB (v8i16, v4i32, v2i64)) and VPERMPS (v4f64, v4i64).
Differential Revision: https://reviews.llvm.org/D42431
llvm-svn: 323260
The existing code was already doing something very similar to subvector insertion so this allows us to remove the nearly duplicate code.
This patch is a little larger than it should be due to differences between the DQI handling between the two today.
llvm-svn: 323212
Summary:
For the most part its better to keep v32i1 as a mask type of a narrower width than trying to promote it to a ymm register.
I had to add some overrides to the methods that get the types for the calling convention so that we still use v32i8 for argument/return purposes.
There are still some regressions in here. I definitely saw some around shuffles. I think we probably should move vXi1 shuffle from lowering to a DAG combine where I think the extend and truncate we have to emit would be better combined.
I think we also need a DAG combine to remove trunc from (extract_vector_elt (trunc))
Overall this removes something like 13000 CHECK lines from lit tests.
Reviewers: zvi, RKSimon, delena, spatel
Reviewed By: RKSimon
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D42031
llvm-svn: 323201
As detailed in rL317463, PSHUFB (like most variable shuffle instructions) uses Op[0] for the source vector and Op[1] for the shuffle index vector, VPERMV works in reverse which is probably where the confusion comes from.
Differential Revision: https://reviews.llvm.org/D42380
llvm-svn: 323190
Summary:
If we can match as a zero extend there's no need to flip the order to get an encoding benefit. As movzx is 3 bytes with independent source/dest registers. The shortest 'and' we could make is also 3 bytes unless we get lucky in the register allocator and its on AL/AX/EAX which have a 2 byte encoding.
This patch was more impressive before r322957 went in. It removed some of the same Ands that got deleted by that patch.
Reviewers: spatel, RKSimon
Reviewed By: spatel
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D42313
llvm-svn: 323175
Add missing patterns for inserting v1i1 into a zero vector. Use insert_subvector to zero upper bits before inserting an element into a vXi1 vector. Replace kshift based isel pattern with insert_subvector based pattern now that code that caused the pattern has been fixed to emit insert_subvector.
llvm-svn: 323173
Summary:
First, we need to explain the core of the vulnerability. Note that this
is a very incomplete description, please see the Project Zero blog post
for details:
https://googleprojectzero.blogspot.com/2018/01/reading-privileged-memory-with-side.html
The basis for branch target injection is to direct speculative execution
of the processor to some "gadget" of executable code by poisoning the
prediction of indirect branches with the address of that gadget. The
gadget in turn contains an operation that provides a side channel for
reading data. Most commonly, this will look like a load of secret data
followed by a branch on the loaded value and then a load of some
predictable cache line. The attacker then uses timing of the processors
cache to determine which direction the branch took *in the speculative
execution*, and in turn what one bit of the loaded value was. Due to the
nature of these timing side channels and the branch predictor on Intel
processors, this allows an attacker to leak data only accessible to
a privileged domain (like the kernel) back into an unprivileged domain.
The goal is simple: avoid generating code which contains an indirect
branch that could have its prediction poisoned by an attacker. In many
cases, the compiler can simply use directed conditional branches and
a small search tree. LLVM already has support for lowering switches in
this way and the first step of this patch is to disable jump-table
lowering of switches and introduce a pass to rewrite explicit indirectbr
sequences into a switch over integers.
However, there is no fully general alternative to indirect calls. We
introduce a new construct we call a "retpoline" to implement indirect
calls in a non-speculatable way. It can be thought of loosely as
a trampoline for indirect calls which uses the RET instruction on x86.
Further, we arrange for a specific call->ret sequence which ensures the
processor predicts the return to go to a controlled, known location. The
retpoline then "smashes" the return address pushed onto the stack by the
call with the desired target of the original indirect call. The result
is a predicted return to the next instruction after a call (which can be
used to trap speculative execution within an infinite loop) and an
actual indirect branch to an arbitrary address.
On 64-bit x86 ABIs, this is especially easily done in the compiler by
using a guaranteed scratch register to pass the target into this device.
For 32-bit ABIs there isn't a guaranteed scratch register and so several
different retpoline variants are introduced to use a scratch register if
one is available in the calling convention and to otherwise use direct
stack push/pop sequences to pass the target address.
This "retpoline" mitigation is fully described in the following blog
post: https://support.google.com/faqs/answer/7625886
We also support a target feature that disables emission of the retpoline
thunk by the compiler to allow for custom thunks if users want them.
These are particularly useful in environments like kernels that
routinely do hot-patching on boot and want to hot-patch their thunk to
different code sequences. They can write this custom thunk and use
`-mretpoline-external-thunk` *in addition* to `-mretpoline`. In this
case, on x86-64 thu thunk names must be:
```
__llvm_external_retpoline_r11
```
or on 32-bit:
```
__llvm_external_retpoline_eax
__llvm_external_retpoline_ecx
__llvm_external_retpoline_edx
__llvm_external_retpoline_push
```
And the target of the retpoline is passed in the named register, or in
the case of the `push` suffix on the top of the stack via a `pushl`
instruction.
There is one other important source of indirect branches in x86 ELF
binaries: the PLT. These patches also include support for LLD to
generate PLT entries that perform a retpoline-style indirection.
The only other indirect branches remaining that we are aware of are from
precompiled runtimes (such as crt0.o and similar). The ones we have
found are not really attackable, and so we have not focused on them
here, but eventually these runtimes should also be replicated for
retpoline-ed configurations for completeness.
For kernels or other freestanding or fully static executables, the
compiler switch `-mretpoline` is sufficient to fully mitigate this
particular attack. For dynamic executables, you must compile *all*
libraries with `-mretpoline` and additionally link the dynamic
executable and all shared libraries with LLD and pass `-z retpolineplt`
(or use similar functionality from some other linker). We strongly
recommend also using `-z now` as non-lazy binding allows the
retpoline-mitigated PLT to be substantially smaller.
When manually apply similar transformations to `-mretpoline` to the
Linux kernel we observed very small performance hits to applications
running typical workloads, and relatively minor hits (approximately 2%)
even for extremely syscall-heavy applications. This is largely due to
the small number of indirect branches that occur in performance
sensitive paths of the kernel.
When using these patches on statically linked applications, especially
C++ applications, you should expect to see a much more dramatic
performance hit. For microbenchmarks that are switch, indirect-, or
virtual-call heavy we have seen overheads ranging from 10% to 50%.
However, real-world workloads exhibit substantially lower performance
impact. Notably, techniques such as PGO and ThinLTO dramatically reduce
the impact of hot indirect calls (by speculatively promoting them to
direct calls) and allow optimized search trees to be used to lower
switches. If you need to deploy these techniques in C++ applications, we
*strongly* recommend that you ensure all hot call targets are statically
linked (avoiding PLT indirection) and use both PGO and ThinLTO. Well
tuned servers using all of these techniques saw 5% - 10% overhead from
the use of retpoline.
We will add detailed documentation covering these components in
subsequent patches, but wanted to make the core functionality available
as soon as possible. Happy for more code review, but we'd really like to
get these patches landed and backported ASAP for obvious reasons. We're
planning to backport this to both 6.0 and 5.0 release streams and get
a 5.0 release with just this cherry picked ASAP for distros and vendors.
This patch is the work of a number of people over the past month: Eric, Reid,
Rui, and myself. I'm mailing it out as a single commit due to the time
sensitive nature of landing this and the need to backport it. Huge thanks to
everyone who helped out here, and everyone at Intel who helped out in
discussions about how to craft this. Also, credit goes to Paul Turner (at
Google, but not an LLVM contributor) for much of the underlying retpoline
design.
Reviewers: echristo, rnk, ruiu, craig.topper, DavidKreitzer
Subscribers: sanjoy, emaste, mcrosier, mgorny, mehdi_amini, hiraditya, llvm-commits
Differential Revision: https://reviews.llvm.org/D41723
llvm-svn: 323155
Primarily, this allows us to use the aggressive extraction mechanisms in combineExtractWithShuffle earlier and make use of UNDEF elements that may be lost during lowering.
Reapplied after rL322279 was reverted at rL322335 due to PR35918, underlying issue was fixed at rL322644.
llvm-svn: 323104
1. ReachingDefsAnalysis - Allows to identify for each instruction what is the “closest” reaching def of a certain register. Used by BreakFalseDeps (for clearance calculation) and ExecutionDomainFix (for arbitrating conflicting domains).
2. ExecutionDomainFix - Changes the variant of the instructions in order to minimize domain crossings.
3. BreakFalseDeps - Breaks false dependencies.
4. LoopTraversal - Creatws a traversal order of the basic blocks that is optimal for loops (introduced in revision L293571). Both ExecutionDomainFix and ReachingDefsAnalysis use this to determine the order they will traverse the basic blocks.
This also included the following changes to ExcecutionDepsFix original logic:
1. BreakFalseDeps and ReachingDefsAnalysis logic no longer restricted by a register class.
2. ReachingDefsAnalysis tracks liveness of reg units instead of reg indices into a given reg class.
Additional changes in affected files:
1. X86 and ARM targets now inherit from ExecutionDomainFix instead of ExecutionDepsFix. BreakFalseDeps also was added to the passes they activate.
2. Comments and references to ExecutionDepsFix replaced with ExecutionDomainFix and BreakFalseDeps, as appropriate.
Additional refactoring changes will follow.
This commit is (almost) NFC.
The only functional change is that now BreakFalseDeps will break dependency for all register classes.
Since no additional instructions were added to the list of instructions that have false dependencies, there is no actual change yet.
In a future commit several instructions (and tests) will be added.
This is the first of multiple patches that fix bugzilla https://bugs.llvm.org/show_bug.cgi?id=33869
Most of the patches are intended at refactoring the existent code.
Additional relevant reviews:
https://reviews.llvm.org/D40331https://reviews.llvm.org/D40332https://reviews.llvm.org/D40333https://reviews.llvm.org/D40334
Differential Revision: https://reviews.llvm.org/D40330
Change-Id: Icaeb75e014eff96a8f721377783f9a3e6c679275
llvm-svn: 323087
Summary:
This patch adds an implementation of targetShrinkDemandedConstant that tries to keep shrinkdemandedbits from removing bits that would otherwise have been recognized as a movzx.
We still need a follow patch to stop moving ands across srl if the and could be represented as a movzx before the shift but not after. I think this should help with some of the cases that D42088 ended up removing during isel.
Reviewers: spatel, RKSimon
Reviewed By: spatel
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D42265
llvm-svn: 323048
This change applies to places where we would turn 128/256-bit code into 512-bit in order to get a wider element type through sext/zext. Any 512-bit types that already existed in the IR/DAG will be left that way.
The width preference has no effect on codegen behavior when the target does not have AVX512 enabled. So AVX/AVX2 codegen cannot be limited via this mechanism yet.
If the preference is lower than 256 we may still use a 256 bit type to do the operation. Constraining to 128 bits makes it much more difficult to support some operations. For many of these cases we need to change element width while keeping element count constant which is easiest done by switching between 256 and 128 bit.
The preference is only obeyed when AVX512 and VLX are available. This means the preference is not obeyed for KNL, but is obeyed for SKX, Cannonlake, and Icelake. For KNL, the only way to do masked operation is on 512-bit registers so we would have to completely disable masking to obey the preference. We would also lose support for gather, scatter, ctlz, vXi64 multiplies, etc. This may change in the future, but this simplifies the initial implementation.
Differential Revision: https://reviews.llvm.org/D41895
llvm-svn: 323016
If we are splatting pairs of 32-bit elements, we can use a 64-bit broadcast to get the job done.
We could probably could probably do this with other sizes too, for example four 16-bit elements. Or we could broadcast pairs of 16-bit elements using a 32-bit element broadcast. But I've left that as a future improvement.
I've also restricted this to AVX2 only because we can only broadcast loads under AVX.
Differential Revision: https://reviews.llvm.org/D42086
llvm-svn: 322730
We legalize selects of masks with scalar conditions using a bitcast to an integer type. But if we are in 32-bit mode we can't convert v64i1 to i64. So instead split the v64i1 to v32i1 and concat it back together. Each half will then be legalized by bitcasting to i32 which is fine.
The test case is a little indirect. If we have the v64i1 select in IR it will get legalized by legalize vector ops which has a run of type legalization after it. That type legalization run is able to fix this i64 bitcast. So in order to avoid that we need a build_vector of a splat which legalize vector ops will ignore. Legalize DAG will then turn that into a select via LowerBUILD_VECTORvXi1. And the select will get legalized. In this case there is no type legalizer run to cleanup the bitcast.
This fixes pr35972.
llvm-svn: 322724
The match* functions have the annoying behavior of modifying its inputs.
Save and restore the inputs, just in case the early out for AVX512 is
hit. This is still not great and its only a matter of time this kind of
bug happens again, but I couldn't come up with a better pattern without
rewriting significant chunks of this code. Fixes PR35977.
llvm-svn: 322644
As mentioned on PR35869, (and came up recently on D41517) we don't create a MMX zero register via the PXOR but instead perform a spill to stack from a XMM zero register.
This patch adds support for direct MMX zero vector creation and should make it easier to add better constant vector creation in the future as well.
Differential Revision: https://reviews.llvm.org/D41908
llvm-svn: 322525
We have to take special care to avoid the cases where the result of the truncate would be padded with zero elements.
Ideally we'd just use ISD::TRUNCATE for these cases instead.
llvm-svn: 322454
Extend vXi1 conditions of vXi8/vXi16 selects even before type legalization gets a chance to split wide vectors. Previously we would only extend 128 and 256 bit vectors. But if we start with a 512 bit vector or wider that needs to be split we wouldn't extend until after the split had taken place. By extending early we improve the results of type legalization.
Don't widen condition of 128/256 bit vXi16/vXi8 selects when we have BWI but not VLX. We can still use a mask register by widening the select to 512-bits instead. This is similar to what we do for compares already.
llvm-svn: 322450
In addition to the existing match as part of a loop-reduction, add a
straightforward pattern match for DAG-contained patterns.
Reviewers: RKSimon, craig.topper
Subscribers: llvm-commits
Reviewed By: RKSimon
Differential Revision: https://reviews.llvm.org/D41811
llvm-svn: 322446
This avoids having the result type stick around until lowering where we have to extend the setcc and insert a truncate. If we get the types converted early we can do more to optimize it.
llvm-svn: 322432
Summary: This is a preparatory step for D41811: refactoring code for breaking vector operands of binary operation to legal-types.
Reviewers: RKSimon, craig.topper, spatel
Reviewed By: RKSimon
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D41925
llvm-svn: 322296
Primarily, this allows us to use the aggressive extraction mechanisms in combineExtractWithShuffle earlier and make use of UNDEF elements that may be lost during lowering.
llvm-svn: 322279
Summary:
As RKSimon suggested in pr35820, in the case that Src is smaller in
bit-size than Indices, need to widen Src to avoid type mismatch.
Fixes pr35820
Reviewers: RKSimon, craig.topper
Reviewed By: RKSimon
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D41865
llvm-svn: 322272
If the index is v2i64 we can use the scatter instruction that has v4i32/v4f32 data register, v2i64 index, and v2i1 mask. Similar was already done for gather.
Implement custom widening for v2i32 data to remove the code that reverses type legalization during lowering.
llvm-svn: 322254
Currently we infer the scale at isel time by analyzing whether the base is a constant 0 or not. If it is we assume scale is 1, else we take it from the element size of the pass thru or stored value. This seems a little weird and I think it makes more sense to make it explicit in the DAG rather than doing tricky things in the backend.
Most of this patch is just making sure we copy the scale around everywhere.
Differential Revision: https://reviews.llvm.org/D40055
llvm-svn: 322210
Normally target independent DAG combine would do this combine based on getSetCCResultType, but with VLX getSetCCResultType returns a vXi1 type preventing the DAG combining from kicking in.
But doing this combine can allow us to remove the explicit sign extend that would otherwise be emitted.
This patch adds a target specific DAG combine to combine the sext+setcc when the result type is the same size as the input to the setcc. I've restricted this to FP compares and things that can be represented with PCMPEQ and PCMPGT since we don't have full integer compare support on the older ISAs.
Differential Revision: https://reviews.llvm.org/D41850
llvm-svn: 322101
I had to drop fast-isel-abort from a test because we can't fast isel some of the mask stuff. When we used intrinsics we implicitly fell back to SelectionDAG for the intrinsic call without triggering the abort error. But with native IR that doesn't happen the same way.
llvm-svn: 322050
Summary:
There are few oddities that occur due to v1i1, v8i1, v16i1 being legal without v2i1 and v4i1 being legal when we don't have VLX. Particularly during legalization of v2i32/v4i32/v2i64/v4i64 masked gather/scatter/load/store. We end up promoting the mask argument to these during type legalization and then have to widen the promoted type to v8iX/v16iX and truncate it to get the element size back down to v8i1/v16i1 to use a 512-bit operation. Since need to fill the upper bits of the mask we have to fill with 0s at the promoted type.
It would be better if we could just have the v2i1/v4i1 types as legal so they don't undergo any promotion. Then we can just widen with 0s directly in a k register. There are no real v4i1/v2i1 instructions anyway. Everything is done on a larger register anyway.
This also fixes an issue that we couldn't implement a masked vextractf32x4 from zmm to xmm properly.
We now have to support widening more compares to 512-bit to get a mask result out so new tablegen patterns got added.
I had to hack the legalizer for widening the operand of a setcc a bit so it didn't try create a setcc returning v4i32, extract from it, then try to promote it using a sign extend to v2i1. Now we create the setcc with v4i1 if the original setcc's result type is v2i1. Then extract that and don't sign extend it at all.
There's definitely room for improvement with some follow up patches.
Reviewers: RKSimon, zvi, guyblank
Reviewed By: RKSimon
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D41560
llvm-svn: 321967
This custom inserter was added in r124272 at which time it added about bunch of Defs for Win64. In r150708, those defs were removed leaving only the "return BB". So I think this means the custom inserter is a NOP these days.
This patch removes the remaining code and stops tagging the instructions for custom insertion
Differential Revision: https://reviews.llvm.org/D41671
llvm-svn: 321747
Currently we use SIGN_EXTEND in lowerMasksToReg as part of calling convention setup, but we don't require a specific value for the upper bits.
This patch changes it to ANY_EXTEND which will be lowered as SIGN_EXTEND if it ends up sticking around.
llvm-svn: 321746
This is an extension of D31156 with the goal that we'll allow memcmp() == 0 expansion
for x86 to use 2 pairs of loads per block.
The memcmp expansion pass (formerly part of CGP) will generate this kind of pattern
with oversized integer compares, so we want to transform these into x86-specific vector
nodes before legalization splits things into scalar chunks.
See PR33325 for more details:
https://bugs.llvm.org/show_bug.cgi?id=33325
Differential Revision: https://reviews.llvm.org/D41618
llvm-svn: 321656
Currently the promotion for these ignores the normal getTypeToPromoteTo and instead just tries to double the element width. This is because the default behavior of getTypeToPromote to just adds 1 to the SimpleVT, which has the affect of increasing the element count while keeping the scalar size the same.
If multiple steps are required to get to a legal operation type, int_to_fp will be promoted multiple times. And fp_to_int will keep trying wider types in a loop until it finds one that works.
getTypeToPromoteTo does have the ability to query a promotion map to get the type and not do the increasing behavior. It seems better to just let the target specify the promotion type in the map explicitly instead of letting the legalizer iterate via widening.
FWIW, it's worth I think for any other vector operations that need to be promoted, we have to specify the type explicitly because the default behavior of getTypeToPromote isn't useful for vectors. The other types of promotion already require either the element count is constant or the total vector width is constant, but neither happens by incrementing the SimpleVT enum.
Differential Revision: https://reviews.llvm.org/D40664
llvm-svn: 321629
Craig Topper