An indirect call site needs to be probed for its potential call targets. With CSSPGO a direct call also needs a probe so that a calling context can be represented by a stack of callsite probes. Unlike pseudo probes for basic blocks that are in form of standalone intrinsic call instructions, pseudo probes for callsites have to be attached to the call instruction, thus a separate instruction would not work.
One possible way of attaching a probe to a call instruction is to use a special metadata that carries information about the probe. The special metadata will have to make its way through the optimization pipeline down to object emission. This requires additional efforts to maintain the metadata in various places. Given that the `!dbg` metadata is a first-class metadata and has all essential support in place , leveraging the `!dbg` metadata as a channel to encode pseudo probe information is probably the easiest solution.
With the requirement of not inflating `!dbg` metadata that is allocated for almost every instruction, we found that the 32-bit DWARF discriminator field which mainly serves AutoFDO can be reused for pseudo probes. DWARF discriminators distinguish identical source locations between instructions and with pseudo probes such support is not required. In this change we are using the discriminator field to encode the ID and type of a callsite probe and the encoded value will be unpacked and consumed right before object emission. When a callsite is inlined, the callsite discriminator field will go with the inlined instructions. The `!dbg` metadata of an inlined instruction is in form of a scope stack. The top of the stack is the instruction's original `!dbg` metadata and the bottom of the stack is for the original callsite of the top-level inliner. Except for the top of the stack, all other elements of the stack actually refer to the nested inlined callsites whose discriminator field (which actually represents a calliste probe) can be used together to represent the inline context of an inlined PseudoProbeInst or CallInst.
To avoid collision with the baseline AutoFDO in various places that handles dwarf discriminators where a check against the `-pseudo-probe-for-profiling` switch is not available, a special encoding scheme is used to tell apart a pseudo probe discriminator from a regular discriminator. For the regular discriminator, if all lowest 3 bits are non-zero, it means the discriminator is basically empty and all higher 29 bits can be reversed for pseudo probe use.
Callsite pseudo probes are inserted in `SampleProfileProbePass` and a target-independent MIR pass `PseudoProbeInserter` is added to unpack the probe ID/type from `!dbg`.
Note that with this work the switch -debug-info-for-profiling will not work with -pseudo-probe-for-profiling anymore. They cannot be used at the same time.
Reviewed By: wmi
Differential Revision: https://reviews.llvm.org/D91756
This change introduces a new clang switch `-fpseudo-probe-for-profiling` to enable AutoFDO with pseudo instrumentation. Please refer to https://reviews.llvm.org/D86193 for the whole story.
One implication from pseudo-probe instrumentation is that the profile is now sensitive to CFG changes. We perform the pseudo instrumentation very early in the pre-LTO pipeline, before any CFG transformation. This ensures that the CFG instrumented and annotated is stable and optimization-resilient.
The early instrumentation also allows the inliner to duplicate probes for inlined instances. When a probe along with the other instructions of a callee function are inlined into its caller function, the GUID of the callee function goes with the probe. This allows samples collected on inlined probes to be reported for the original callee function.
Reviewed By: wmi
Differential Revision: https://reviews.llvm.org/D86502
Added support for the options mabi=vec-extabi and mabi=vec-default which are analogous to qvecnvol and qnovecnvol when using XL on AIX.
The extended Altivec ABI on AIX is enabled using mabi=vec-extabi in clang and vec-extabi in llc.
Reviewed By: Xiangling_L, DiggerLin
Differential Revision: https://reviews.llvm.org/D89684
Recently HIP toolchain made a change to use clang instead of opt/llc to do compilation
(https://reviews.llvm.org/D81861). The intention is to make HIP toolchain canonical like
other toolchains.
However, this change introduced an unintentional change regarding backend fp fuse
option, which caused regressions in some HIP applications.
Basically before the change, HIP toolchain used clang to generate bitcode, then use
opt/llc to optimize bitcode and generate ISA. As such, the amdgpu backend takes
the default fp fuse mode which is 'Standard'. This mode respect contract flag of
fmul/fadd instructions and do not fuse fmul/fadd instructions without contract flag.
However, after the change, HIP toolchain now use clang to generate IR, do optimization,
and generate ISA as one process. Now amdgpu backend fp fuse option is determined
by -ffp-contract option, which is 'fast' by default. And this -ffp-contract=fast language option
is translated to 'Fast' fp fuse option in backend. Suddenly backend starts to fuse fmul/fadd
instructions without contract flag.
This causes wrong result for some device library functions, e.g. tan(-1e20), which should
return 0.8446, now returns -0.933. What is worse is that since backend with 'Fast' fp fuse
option does not respect contract flag, there is no way to use #pragma clang fp contract
directive to enforce fp contract requirements.
This patch fixes the regression by introducing a new value 'fast-honor-pragmas' for -ffp-contract
and use it for HIP by default. 'fast-honor-pragmas' is equivalent to 'fast' in frontend but
let the backend to use 'Standard' fp fuse option. 'fast-honor-pragmas' is useful since 'Fast'
fp fuse option in backend does not honor contract flag, it is of little use to HIP
applications since all code with #pragma STDC FP_CONTRACT or any IR from a
source compiled with -ffp-contract=on is broken.
Differential Revision: https://reviews.llvm.org/D90174
This moves handling of alwaysinline, coroutines, matrix lowering, PGO,
and LTO-required passes into PassBuilder. Much of this is replicated
between Clang and opt. Other out-of-tree users also replicate some of
this, such as Rust [1] replicating the alwaysinline, LTO, and PGO
passes.
The LTO passes are also now run in
build(Thin)LTOPreLinkDefaultPipeline() since they are semantically
required for (Thin)LTO.
[1]: f5230fbf76/compiler/rustc_llvm/llvm-wrapper/PassWrapper.cpp (L896)
Reviewed By: tejohnson
Differential Revision: https://reviews.llvm.org/D91585
Make it required. Since it's a module pass, optnone won't test it, so
extend the clang test to also use opt-bisect now that it's supported.
14/16 check-dfsan tests failed with NPM enabled, now all pass.
Reviewed By: leonardchan
Differential Revision: https://reviews.llvm.org/D91385
This removes lots of duplicated code which was necessary before
https://reviews.llvm.org/D89158.
Now we can use PassBuilder::runRegisteredEPCallbacks().
This is mostly sanitizers.
There is likely more that can be done to simplify, but let's start with this.
Reviewed By: ychen
Differential Revision: https://reviews.llvm.org/D90870
Some targets may add required passes via
TargetMachine::registerPassBuilderCallbacks(). We need to run those even
under -O0. As an example, BPFTargetMachine adds
BPFAbstractMemberAccessPass, a required pass.
This also allows us to clean up BackendUtil.cpp (and out-of-tree Rust
usage of the NPM) by allowing us to share added passes like coroutines
and sanitizers between -O0 and other optimization levels.
Since callbacks may end up not adding passes, we need to check if the
pass managers are empty before adding them, so PassManager now has an
isEmpty() function. For example, polly adds callbacks but doesn't always
add passes in those callbacks, so this is necessary to keep
-debug-pass-manager tests' output from changing depending on if polly is
enabled or not.
Tests are a continuation of those added in
https://reviews.llvm.org/D89083.
Reviewed By: asbirlea, Meinersbur
Differential Revision: https://reviews.llvm.org/D89158
Some targets may add required passes via
TargetMachine::registerPassBuilderCallbacks(). We need to run those even
under -O0. As an example, BPFTargetMachine adds
BPFAbstractMemberAccessPass, a required pass.
This also allows us to clean up BackendUtil.cpp (and out-of-tree Rust
usage of the NPM) by allowing us to share added passes like coroutines
and sanitizers between -O0 and other optimization levels.
Tests are a continuation of those added in
https://reviews.llvm.org/D89083.
In order to prevent TargetMachines from adding unnecessary optimization
passes at -O0, TargetMachine::registerPassBuilderCallbacks() will be
changed to take an OptimizationLevel, but that will be done separately.
Reviewed By: asbirlea
Differential Revision: https://reviews.llvm.org/D89158
Similar to -fprofile-generate=, add -fmemory-profile= which takes a
directory path. This is passed down to LLVM via a new module flag
metadata. LLVM in turn provides this name to the runtime via the new
__memprof_profile_filename variable.
Additionally, always pass a default filename (in $cwd if a directory
name is not specified vi the = form of the option). This is also
consistent with the behavior of the PGO instrumentation. Since the
memory profiles will generally be fairly large, it doesn't make sense to
dump them to stderr. Also, importantly, the memory profiles will
eventually be dumped in a compact binary format, which is another reason
why it does not make sense to send these to stderr by default.
Change the existing memprof tests to specify log_path=stderr when that
was being relied on.
Depends on D89086.
Differential Revision: https://reviews.llvm.org/D89087
Make DebugLogging a member variable so that users of PassBuilder don't
need to pass it around so much.
Move call to TargetMachine::registerPassBuilderCallbacks() within
PassBuilder so users don't need to remember to call it.
Reviewed By: asbirlea
Differential Revision: https://reviews.llvm.org/D90437
The name is unfortunate because it is similar to the driver option -ftest-coverage.
It turns out aside from one occurrence in a test, this option is not used.
Move it as an EP callback (-O[123]) or in addSanitizersAtO0.
This makes it not run in ThinLTO pre-link (like the other sanitizers),
so don't check LTO runs in hwasan-new-pm.c. Changing its position also
seems to change the generated IR. I think we just need to make sure the
pass runs.
Reviewed By: leonardchan
Differential Revision: https://reviews.llvm.org/D88936
SUMMARY:
In IBM compiler xlclang , there is an option -fnovisibility which suppresses visibility. For more details see: https://www.ibm.com/support/knowledgecenter/SSGH3R_16.1.0/com.ibm.xlcpp161.aix.doc/compiler_ref/opt_visibility.html.
We need to add the option -mignore-xcoff-visibility for compatibility with the IBM AIX OS (as the option is enabled by default in AIX). With this option llvm does not emit any visibility attribute to ASM or XCOFF object file.
The option only work on the AIX OS, for other non-AIX OS using the option will report an unsupported options error.
In AIX OS:
1.1 the option -mignore-xcoff-visibility is enabled by default , if there is not -fvisibility=* and -mignore-xcoff-visibility explicitly in the clang command .
1.2 if there is -fvisibility=* explicitly but not -mignore-xcoff-visibility explicitly in the clang command. it will generate visibility attributes.
1.3 if there are both -fvisibility=* and -mignore-xcoff-visibility explicitly in the clang command. The option "-mignore-xcoff-visibility" wins , it do not emit the visibility attribute.
The option -mignore-xcoff-visibility has no effect on visibility attribute when compile with -emit-llvm option to generated LLVM IR.
Reviewer: daltenty,Jason Liu
Differential Revision: https://reviews.llvm.org/D87451
The patch adds a new TargetMachine member "registerPassBuilderCallbacks" for targets to add passes to the pass pipeline using the New Pass Manager (similar to adjustPassManager for the Legacy Pass Manager).
Reviewed By: aeubanks
Differential Revision: https://reviews.llvm.org/D88138
GCC 7 introduced -fprofile-update={atomic,prefer-atomic} (prefer-atomic is for
best efforts (some targets do not support atomics)) to increment counters
atomically, which is exactly what we have done with -fprofile-instr-generate
(D50867) and -fprofile-arcs (b5ef137c11).
This patch adds the option to clang to surface the internal options at driver level.
GCC 7 also turned on -fprofile-update=prefer-atomic when -pthread is specified,
but it has performance regression
(https://gcc.gnu.org/bugzilla/show_bug.cgi?id=89307). So we don't follow suit.
Differential Revision: https://reviews.llvm.org/D87737
D87921 was reverted in commit b89059a313
as it was causing an unknown llvm PPC bot failure. Reapplying the patch
after confirming that this is not responsible. Build bot failure:
https://reviews.llvm.org/D87921#2286644 which caused the revert.
The wrong placement of add pass with optimizations led to
-funique-internal-linkage-names being disabled.
Fixed the placement of the MPM.addpass for UniqueInternalLinkageNames to make it
work correctly with -O2 and new pass manager. Updated the tests to explicitly
check O0 and O1.
Differential Revision: https://reviews.llvm.org/D87921
This completes the circle, complementing -lto-embed-bitcode
(specifically, post-merge-pre-opt). Using -thinlto-assume-merged skips
function importing. The index file is still needed for the other data it
contains.
Differential Revision: https://reviews.llvm.org/D87949
Fixed the placement of the MPM.addpass for UniqueInternalLinkageNames to make
it work correctly with -O2 and new pass manager. Updated the tests to
explicitly check O0 and O2.
Previously, the addPass was placed before BackendUtil.cpp#L1373 which is wrong
as MPM gets assigned at this point and any additions to the pass vector before
this is wrong. This change just moves it after MPM is assigned and places it at
a point where O0 and O0+ can share it.
Differential Revision: https://reviews.llvm.org/D87921
This will embed bitcode after (Thin)LTO merge, but before optimizations.
In the case the thinlto backend is called from clang, the .llvmcmd
section is also produced. Doing so in the case where the caller is the
linker doesn't yet have a motivation, and would require plumbing through
command line args.
Differential Revision: https://reviews.llvm.org/D87636
This patch adds a command line flag for the machine function splitter
(added in rG94faadaca4e1).
-fsplit-machine-functions
Split machine functions using profile information (x86 ELF). On
other targets an error is emitted. If profile information is not
provided a warning is emitted notifying the user that profile
information is required.
Differential Revision: https://reviews.llvm.org/D87047
This is consistent with the clang option added in
7ed8124d46, and the comments on the
runtime patch in D87120.
Differential Revision: https://reviews.llvm.org/D87622
See RFC for background:
http://lists.llvm.org/pipermail/llvm-dev/2020-June/142744.html
Note that the runtime changes will be sent separately (hopefully this
week, need to add some tests).
This patch includes the LLVM pass to instrument memory accesses with
either inline sequences to increment the access count in the shadow
location, or alternatively to call into the runtime. It also changes
calls to memset/memcpy/memmove to the equivalent runtime version.
The pass is modeled on the address sanitizer pass.
The clang changes add the driver option to invoke the new pass, and to
link with the upcoming heap profiling runtime libraries.
Currently there is no attempt to optimize the instrumentation, e.g. to
aggregate updates to the same memory allocation. That will be
implemented as follow on work.
Differential Revision: https://reviews.llvm.org/D85948
This patch adds the -Xclang option
"-fexperimental-debug-variable-locations" and same LLVM CodeGen option,
to pick which variable location tracking solution to use.
Right now all the switch does is pick which LiveDebugValues
implementation to use, the normal VarLoc one or the instruction
referencing one in rGae6f78824031. Over time, the aim is to add fragments
of support in aid of the value-tracking RFC:
http://lists.llvm.org/pipermail/llvm-dev/2020-February/139440.html
also controlled by this command line switch. That will slowly move
variable locations to be defined by an instruction calculating a value,
and a DBG_INSTR_REF instruction referring to that value. Thus, this is
going to grow into a "use the new kind of variable locations" switch,
rather than just "use the new LiveDebugValues implementation".
Differential Revision: https://reviews.llvm.org/D83048
Adds the binary format goff and the operating system zos to the triple
class. goff is selected as default binary format if zos is choosen as
operating system. No further functionality is added.
Reviewers: efriedma, tahonermann, hubert.reinterpertcast, MaskRay
Reviewed By: efriedma, tahonermann, hubert.reinterpertcast
Differential Revision: https://reviews.llvm.org/D82081
Pass LowerMatrixIntrinsics wasn't running yet running under the new pass
manager, and this adds LowerMatrixIntrinsics to the pipeline (to the
same place as where it is running in the old PM).
Differential Revision: https://reviews.llvm.org/D84180
OptNoneInstrumentation is part of StandardInstrumentations. It skips
functions (or loops) that are marked optnone.
The feature of skipping optional passes for optnone functions under NPM
is gated on a -enable-npm-optnone flag. Currently it is by default
false. That is because we still need to mark all required passes to be
required. Otherwise optnone functions will start having incorrect
semantics. After that is done in following changes, we can remove the
flag and always enable this.
Reviewed By: ychen
Differential Revision: https://reviews.llvm.org/D83519
Keep deprecated -fsanitize-coverage-{white,black}list as aliases for compatibility for now.
Reviewed By: echristo
Differential Revision: https://reviews.llvm.org/D82244
When targetting CodeView, the goal is to store argv0 & cc1 cmd-line in the emitted .OBJ, in order to allow a reproducer from the .OBJ alone.
This patch is to simplify https://reviews.llvm.org/D80833
Summary:
Add a flag to omit the xray_fn_idx to cut size overhead and relocations
roughly in half at the cost of reduced performance for single function
patching. Minor additions to compiler-rt support per-function patching
without the index.
Reviewers: dberris, MaskRay, johnislarry
Subscribers: hiraditya, arphaman, cfe-commits, #sanitizers, llvm-commits
Tags: #clang, #sanitizers, #llvm
Differential Revision: https://reviews.llvm.org/D81995
Summary:
This fixes pr33372.cpp under the new pass manager.
ASan adds padding to globals. For example, it will change a {i32, i32, i32} to a {{i32, i32, i32}, [52 x i8]}. However, when loading from the {i32, i32, i32}, InstCombine may (after various optimizations) end up loading 16 bytes instead of 12, likely because it thinks the [52 x i8] padding is ok to load from. But ASan checks that padding should not be loaded from.
Ultimately this is an issue of *San passes wanting to be run after all optimizations. This change moves the module passes right next to the corresponding function passes.
Also remove comment that's no longer relevant, this is the last ASan/MSan/TSan failure under the NPM (hopefully...).
As mentioned in https://reviews.llvm.org/rG1285e8bcac2c54ddd924ffb813b2b187467ac2a6, NPM doesn't support LTO + sanitizers, so modified some tests that test for that.
Reviewers: leonardchan, vitalybuka
Subscribers: cfe-commits
Tags: #clang
Differential Revision: https://reviews.llvm.org/D81323
This lets us to remove !stack-safe metadata and
better controll when to perform StackSafety
analysis.
Reviewers: eugenis
Subscribers: hiraditya, steven_wu, dexonsmith, cfe-commits, llvm-commits
Tags: #clang, #llvm
Differential Revision: https://reviews.llvm.org/D80771
This patch adds clang options:
-fbasic-block-sections={all,<filename>,labels,none} and
-funique-basic-block-section-names.
LLVM Support for basic block sections is already enabled.
+ -fbasic-block-sections={all, <file>, labels, none} : Enables/Disables basic
block sections for all or a subset of basic blocks. "labels" only enables
basic block symbols.
+ -funique-basic-block-section-names: Enables unique section names for
basic block sections, disabled by default.
Differential Revision: https://reviews.llvm.org/D68049
Canonicalize on storing FP options in LangOptions instead of
redundantly in CodeGenOptions. Incorporate -ffast-math directly
into the values of those LangOptions rather than considering it
separately when building FPOptions. Build IR attributes from
those options rather than a mix of sources.
We should really simplify the driver/cc1 interaction here and have
the driver pass down options that cc1 directly honors. That can
happen in a follow-up, though.
Patch by Michele Scandale!
https://reviews.llvm.org/D80315
Summary:
This was attempted once before in https://reviews.llvm.org/D79698, but
was reverted due to the coverage pass running in the wrong part of the
pipeline. This commit puts it in the same place as the other sanitizers.
This changes PassBuilder.OptimizerLastEPCallbacks to work on a
ModulePassManager instead of a FunctionPassManager. That is because
SanitizerCoverage cannot (easily) be split into a module pass and a
function pass like some of the other sanitizers since in its current
implementation it conditionally inserts module constructors based on
whether or not it successfully modified functions.
This fixes compiler-rt/test/msan/coverage-levels.cpp under the new pass
manager (last check-msan test).
Currently sanitizers + LTO don't work together under the new pass
manager, so I removed tests that checked that this combination works for
sancov.
Subscribers: hiraditya, cfe-commits, llvm-commits
Tags: #clang, #llvm
Differential Revision: https://reviews.llvm.org/D80692
Summary:
This was attempted once before in https://reviews.llvm.org/D79698, but
was reverted due to the coverage pass running in the wrong part of the
pipeline. This commit puts it in the same place as the other sanitizers.
This changes PassBuilder.OptimizerLastEPCallbacks to work on a
ModulePassManager instead of a FunctionPassManager. That is because
SanitizerCoverage cannot (easily) be split into a module pass and a
function pass like some of the other sanitizers since in its current
implementation it conditionally inserts module constructors based on
whether or not it successfully modified functions.
This fixes compiler-rt/test/msan/coverage-levels.cpp under the new pass
manager (last check-msan test).
Subscribers: hiraditya, cfe-commits, llvm-commits
Tags: #clang, #llvm
Differential Revision: https://reviews.llvm.org/D80692
This reverts commit 7d5bb94d78.
Reverting since this leads to a linker error we're seeing on Fuchsia.
The underlying issue seems to be that inlining is run after sanitizers
and causes different comdat groups instrumented by Sancov to reference
non-key symbols defined in other comdat groups.
Will re-land this patch after a fix for that is landed.
gcov 4.8 (r189778) moved the exit block from the last to the second.
The .gcda format is compatible with 4.7 but
* decoding libgcov 4.7 produced .gcda with gcov [4.7,8) can mistake the
exit block, emit bogus `%s:'%s' has arcs from exit block\n` warnings,
and print wrong `" returned %s` for branch statistics (-b).
* decoding libgcov 4.8 produced .gcda with gcov 4.7 has similar issues.
Also, rename "return block" to "exit block" because the latter is the
appropriate term.
Summary:
This fixes compiler-rt/test/msan/coverage-levels.cpp under the new pass manager (final check-msan test!).
Under the old pass manager, the coverage pass would run before the MSan pass. The opposite happened under the new pass manager. The MSan pass adds extra basic blocks, changing the number of coverage callbacks.
Reviewers: vitalybuka, leonardchan
Subscribers: cfe-commits
Tags: #clang
Differential Revision: https://reviews.llvm.org/D79698
Defaulting to -Xclang -coverage-version='407*' makes .gcno/.gcda
compatible with gcov [4.7,8)
In addition, delete clang::CodeGenOptionsBase::CoverageExtraChecksum and GCOVOptions::UseCfgChecksum.
We can infer the information from the version.
With this change, .gcda files produced by `clang --coverage a.o` linked executable can be read by gcov 4.7~7.
We don't need other -Xclang -coverage* options.
There may be a mismatching version warning, though.
(Note, GCC r173147 "split checksum into cfg checksum and line checksum"
made gcov 4.7 incompatible with previous versions.)
rL144865 incorrectly wrote function names for GCOV_TAG_FUNCTION
(this might be part of the reasons the header says
"We emit files in a corrupt version of GCOV's "gcda" file format").
rL176173 and rL177475 realized the problem and introduced -coverage-no-function-names-in-data
to work around the issue. (However, the description is wrong.
libgcov never writes function names, even before GCC 4.2).
In reality, the linker command line has to look like:
clang --coverage -Xclang -coverage-version='407*' -Xclang -coverage-cfg-checksum -Xclang -coverage-no-function-names-in-data
Failing to pass -coverage-no-function-names-in-data can make gcov 4.7~7
either produce wrong results (for one gcov-4.9 program, I see "No executable lines")
or segfault (gcov-7).
(gcov-8 uses an incompatible format.)
This patch deletes -coverage-no-function-names-in-data and the related
function names support from libclang_rt.profile
https://reviews.llvm.org/D63616 added `-fsanitize-coverage-whitelist`
and `-fsanitize-coverage-blacklist` for clang.
However, it was done only for legacy pass manager.
This patch enable it for new pass manager as well.
Reviewed By: vitalybuka
Differential Revision: https://reviews.llvm.org/D79653
This is a standalone patch and this would help Propeller do a better job of code
layout as it can accurately attribute the profiles to the right internal linkage
function.
This also helps SampledFDO/AutoFDO correctly associate sampled profiles to the
right internal function. Currently, if there is more than one internal symbol
foo, their profiles are aggregated by SampledFDO.
This patch adds a new clang option, -funique-internal-funcnames, to generate
unique names for functions with internal linkage. This patch appends the md5
hash of the module name to the function symbol as a best effort to generate a
unique name for symbols with internal linkage.
Differential Revision: https://reviews.llvm.org/D73307
Summary:
Properly forward TrackOrigins and Recover user options to the MSan pass under the new pass manager.
This makes the number of check-msan failures when ENABLE_EXPERIMENTAL_NEW_PASS_MANAGER is TRUE go from 52 to 2.
Based on https://reviews.llvm.org/D77249.
Reviewers: nemanjai, vitalybuka, leonardchan
Subscribers: cfe-commits
Tags: #clang
Differential Revision: https://reviews.llvm.org/D79445
This reverts commit 60c642e74b.
This patch is making the TLI "closed" for a predefined set of VecLib
while at the moment it is extensible for anyone to customize when using
LLVM as a library.
Reverting while we figure out a way to re-land it without losing the
generality of the current API.
Differential Revision: https://reviews.llvm.org/D77925
Summary:
This commit adds two command-line options to clang.
These options let the user decide which functions will receive SanitizerCoverage instrumentation.
This is most useful in the libFuzzer use case, where it enables targeted coverage-guided fuzzing.
Patch by Yannis Juglaret of DGA-MI, Rennes, France
libFuzzer tests its target against an evolving corpus, and relies on SanitizerCoverage instrumentation to collect the code coverage information that drives corpus evolution. Currently, libFuzzer collects such information for all functions of the target under test, and adds to the corpus every mutated sample that finds a new code coverage path in any function of the target. We propose instead to let the user specify which functions' code coverage information is relevant for building the upcoming fuzzing campaign's corpus. To this end, we add two new command line options for clang, enabling targeted coverage-guided fuzzing with libFuzzer. We see targeted coverage guided fuzzing as a simple way to leverage libFuzzer for big targets with thousands of functions or multiple dependencies. We publish this patch as work from DGA-MI of Rennes, France, with proper authorization from the hierarchy.
Targeted coverage-guided fuzzing can accelerate bug finding for two reasons. First, the compiler will avoid costly instrumentation for non-relevant functions, accelerating fuzzer execution for each call to any of these functions. Second, the built fuzzer will produce and use a more accurate corpus, because it will not keep the samples that find new coverage paths in non-relevant functions.
The two new command line options are `-fsanitize-coverage-whitelist` and `-fsanitize-coverage-blacklist`. They accept files in the same format as the existing `-fsanitize-blacklist` option <https://clang.llvm.org/docs/SanitizerSpecialCaseList.html#format>. The new options influence SanitizerCoverage so that it will only instrument a subset of the functions in the target. We explain these options in detail in `clang/docs/SanitizerCoverage.rst`.
Consider now the woff2 fuzzing example from the libFuzzer tutorial <https://github.com/google/fuzzer-test-suite/blob/master/tutorial/libFuzzerTutorial.md>. We are aware that we cannot conclude much from this example because mutating compressed data is generally a bad idea, but let us use it anyway as an illustration for its simplicity. Let us use an empty blacklist together with one of the three following whitelists:
```
# (a)
src:*
fun:*
# (b)
src:SRC/*
fun:*
# (c)
src:SRC/src/woff2_dec.cc
fun:*
```
Running the built fuzzers shows how many instrumentation points the compiler adds, the fuzzer will output //XXX PCs//. Whitelist (a) is the instrument-everything whitelist, it produces 11912 instrumentation points. Whitelist (b) focuses coverage to instrument woff2 source code only, ignoring the dependency code for brotli (de)compression; it produces 3984 instrumented instrumentation points. Whitelist (c) focuses coverage to only instrument functions in the main file that deals with WOFF2 to TTF conversion, resulting in 1056 instrumentation points.
For experimentation purposes, we ran each fuzzer approximately 100 times, single process, with the initial corpus provided in the tutorial. We let the fuzzer run until it either found the heap buffer overflow or went out of memory. On this simple example, whitelists (b) and (c) found the heap buffer overflow more reliably and 5x faster than whitelist (a). The average execution times when finding the heap buffer overflow were as follows: (a) 904 s, (b) 156 s, and (c) 176 s.
We explain these results by the fact that WOFF2 to TTF conversion calls the brotli decompression algorithm's functions, which are mostly irrelevant for finding bugs in WOFF2 font reconstruction but nevertheless instrumented and used by whitelist (a) to guide fuzzing. This results in longer execution time for these functions and a partially irrelevant corpus. Contrary to whitelist (a), whitelists (b) and (c) will execute brotli-related functions without instrumentation overhead, and ignore new code paths found in them. This results in faster bug finding for WOFF2 font reconstruction.
The results for whitelist (b) are similar to the ones for whitelist (c). Indeed, WOFF2 to TTF conversion calls functions that are mostly located in SRC/src/woff2_dec.cc. The 2892 extra instrumentation points allowed by whitelist (b) do not tamper with bug finding, even though they are mostly irrelevant, simply because most of these functions do not get called. We get a slightly faster average time for bug finding with whitelist (b), which might indicate that some of the extra instrumentation points are actually relevant, or might just be random noise.
Reviewers: kcc, morehouse, vitalybuka
Reviewed By: morehouse, vitalybuka
Subscribers: pratyai, vitalybuka, eternalsakura, xwlin222, dende, srhines, kubamracek, #sanitizers, lebedev.ri, hiraditya, cfe-commits, llvm-commits
Tags: #clang, #sanitizers, #llvm
Differential Revision: https://reviews.llvm.org/D63616
Summary:
Encode `-fveclib` setting as per-function attribute so it can threaded through to LTO backends. Accordingly per-function TLI now reads
the attributes and select available vector function list based on that. Now we also populate function list for all supported vector
libraries for the shared per-module `TargetLibraryInfoImpl`, so each function can select its available vector list independently but without
duplicating the vector function lists. Inlining between incompatbile vectlib attributed is also prohibited now.
Subscribers: hiraditya, dexonsmith, cfe-commits
Tags: #clang
Differential Revision: https://reviews.llvm.org/D77632
Summary:
CGProfilePass is run by default in certain new pass manager optimization pipeline. Assemblers other than llvm as (such as gnu as) cannot recognize the .cgprofile entries generated and emitted from this pass, causing build time error.
This patch adds new options in clang CodeGenOpts and PassBuilder options so that we can turn cgprofile off when not using integrated assembler.
Reviewers: Bigcheese, xur, george.burgess.iv, chandlerc, manojgupta
Reviewed By: manojgupta
Subscribers: manojgupta, void, hiraditya, dexonsmith, llvm-commits, tcwang, llozano
Tags: #llvm, #clang
Differential Revision: https://reviews.llvm.org/D62627
Summary:
Run StackSafetyAnalysis at the end of the IR pipeline and annotate
proven safe allocas with !stack-safe metadata. Do not instrument such
allocas in the AArch64StackTagging pass.
Reviewers: pcc, vitalybuka, ostannard
Reviewed By: vitalybuka
Subscribers: merge_guards_bot, kristof.beyls, hiraditya, cfe-commits, gilang, llvm-commits
Tags: #clang, #llvm
Differential Revision: https://reviews.llvm.org/D73513
Summary:
Depends on https://reviews.llvm.org/D71902.
The last in a series of six patches that ports the LLVM coroutines
passes to the new pass manager infrastructure.
This patch has Clang schedule the new coroutines passes when the
`-fexperimental-new-pass-manager` option is used. With this and the
previous 5 patches, Clang is capable of building and successfully
running the test suite of large coroutines projects such as
https://github.com/lewissbaker/cppcoro with
`ENABLE_EXPERIMENTAL_NEW_PASS_MANAGER=On`.
Reviewers: GorNishanov, lewissbaker, chandlerc, junparser
Subscribers: EricWF, cfe-commits, llvm-commits
Tags: #clang
Differential Revision: https://reviews.llvm.org/D71903
This patch enables the debug entry values feature.
- Remove the (CC1) experimental -femit-debug-entry-values option
- Enable it for x86, arm and aarch64 targets
- Resolve the test failures
- Leave the llc experimental option for targets that do not
support the CallSiteInfo yet
Differential Revision: https://reviews.llvm.org/D73534
This patch enables the debug entry values feature.
- Remove the (CC1) experimental -femit-debug-entry-values option
- Enable it for x86, arm and aarch64 targets
- Resolve the test failures
- Leave the llc experimental option for targets that do not
support the CallSiteInfo yet
Differential Revision: https://reviews.llvm.org/D73534
This is how it should've been and brings it more in line with
std::string_view. There should be no functional change here.
This is mostly mechanical from a custom clang-tidy check, with a lot of
manual fixups. It uncovers a lot of minor inefficiencies.
This doesn't actually modify StringRef yet, I'll do that in a follow-up.
This restores 59733525d3 (D71913), along
with bot fix 19c76989bb.
The bot failure should be fixed by D73418, committed as
af954e441a.
I also added a fix for non-x86 bot failures by requiring x86 in new test
lld/test/ELF/lto/devirt_vcall_vis_public.ll.
Summary:
Third part in series to support Safe Whole Program Devirtualization
Enablement, see RFC here:
http://lists.llvm.org/pipermail/llvm-dev/2019-December/137543.html
This patch adds type test metadata under -fwhole-program-vtables,
even for classes without hidden visibility. It then changes WPD to skip
devirtualization for a virtual function call when any of the compatible
vtables has public vcall visibility.
Additionally, internal LLVM options as well as lld and gold-plugin
options are added which enable upgrading all public vcall visibility
to linkage unit (hidden) visibility during LTO. This enables the more
aggressive WPD to kick in based on LTO time knowledge of the visibility
guarantees.
Support was added to all flavors of LTO WPD (regular, hybrid and
index-only), and to both the new and old LTO APIs.
Unfortunately it was not simple to split the first and second parts of
this part of the change (the unconditional emission of type tests and
the upgrading of the vcall visiblity) as I needed a way to upgrade the
public visibility on legacy WPD llvm assembly tests that don't include
linkage unit vcall visibility specifiers, to avoid a lot of test churn.
I also added a mechanism to LowerTypeTests that allows dropping type
test assume sequences we now aggressively insert when we invoke
distributed ThinLTO backends with null indexes, which is used in testing
mode, and which doesn't invoke the normal ThinLTO backend pipeline.
Depends on D71907 and D71911.
Reviewers: pcc, evgeny777, steven_wu, espindola
Subscribers: emaste, Prazek, inglorion, arichardson, hiraditya, MaskRay, dexonsmith, dang, davidxl, cfe-commits, llvm-commits
Tags: #clang, #llvm
Differential Revision: https://reviews.llvm.org/D71913
Summary:
The old pass manager separated speed optimization and size optimization
levels into two unsigned values. Coallescing both in an enum in the new
pass manager may lead to unintentional casts and comparisons.
In particular, taking a look at how the loop unroll passes were constructed
previously, the Os/Oz are now (==new pass manager) treated just like O3,
likely unintentionally.
This change disallows raw comparisons between optimization levels, to
avoid such unintended effects. As an effect, the O{s|z} behavior changes
for loop unrolling and loop unroll and jam, matching O2 rather than O3.
The change also parameterizes the threshold values used for loop
unrolling, primarily to aid testing.
Reviewers: tejohnson, davidxl
Reviewed By: tejohnson
Subscribers: zzheng, ychen, mehdi_amini, hiraditya, steven_wu, dexonsmith, dang, cfe-commits, llvm-commits
Tags: #clang, #llvm
Differential Revision: https://reviews.llvm.org/D72547
which is the default TLS model for non-PIC objects. This allows large/
many thread local variables or a compact/fast code in an executable.
Specification is same as that of GCC. For example, the code model
option precedes the TLS size option.
TLS access models other than local-exec are not changed. It means
supoort of the large code model is only in the local exec TLS model.
Patch By KAWASHIMA Takahiro (kawashima-fj <t-kawashima@fujitsu.com>)
Reviewers: dmgreen, mstorsjo, t.p.northover, peter.smith, ostannard
Reviewd By: peter.smith
Committed by: peter.smith
Differential Revision: https://reviews.llvm.org/D71688
down to pass builder in ltobackend.
Currently CodeGenOpts like UnrollLoops/VectorizeLoop/VectorizeSLP in clang
are not passed down to pass builder in ltobackend when new pass manager is
used. This is inconsistent with the behavior when new pass manager is used
and thinlto is not used. Such inconsistency causes slp vectorization pass
not being enabled in ltobackend for O3 + thinlto right now. This patch
fixes that.
Differential Revision: https://reviews.llvm.org/D72386
There's quite a lot of references to Polly in the LLVM CMake codebase. However
the registration pattern used by Polly could be useful to other external
projects: thanks to that mechanism it would be possible to develop LLVM
extension without touching the LLVM code base.
This patch has two effects:
1. Remove all code specific to Polly in the llvm/clang codebase, replaicing it
with a generic mechanism
2. Provide a generic mechanism to register compiler extensions.
A compiler extension is similar to a pass plugin, with the notable difference
that the compiler extension can be configured to be built dynamically (like
plugins) or statically (like regular passes).
As a result, people willing to add extra passes to clang/opt can do it using a
separate code repo, but still have their pass be linked in clang/opt as built-in
passes.
Differential Revision: https://reviews.llvm.org/D61446
clang/lib/CodeGen/CodeGenModule performs the -mpie-copy-relocations
check and sets dso_local on applicable global variables. We don't need
to duplicate the work in TargetMachine shouldAssumeDSOLocal.
Verified that -mpie-copy-relocations can still emit PC relative
relocations for external variable accesses.
clang -target x86_64 -fpie -mpie-copy-relocations -c => R_X86_64_PC32
clang -target aarch64 -fpie -mpie-copy-relocations -c => R_AARCH64_ADR_PREL_PG_HI21+R_AARCH64_LDST64_ABS_LO12_NC
Summary:
Follow-on to D66428 and D71193, to build the TLI per-function so
that -fno-builtin* handling can be migrated to use function attributes.
See discussion on D61634 for background. This is an enabler for fixing
handling of these options for LTO, for example.
With D71193, the -fno-builtin* flags are converted to function
attributes, so we can now set this information per-function on the TLI.
In this patch, the TLI constructor is changed to take a Function, which
can be used to override the available builtins. The TLI is augmented
with an array that can be used to specify which builtins are not
available for the corresponding function. The available function checks
are changed to consult this override before checking the underlying
module level baseline TLII. New code is added to set this override
array based on the attributes.
I also removed the code that sets availability in the TLII in clang from
the options, which is no longer needed.
I removed a per-Triple caching of TLII objects in the analysis object,
as it is based on the Module's Triple which is the same for all
functions in any case. Is there a case where we would be compiling
multiple Modules with different Triples in one compilation?
Finally, I have changed the legacy analysis wrapper to create and use
the new PM analysis class (TargetLibraryAnalysis) in getTLI. This is
consistent with the behavior of getTTI for the legacy
TargetTransformInfo analysis. This change means that getTLI now creates
a new TLI on each call (although that should be very cheap as we cache
the module level TLII, and computing the per-function
attribute based availability should also be reasonably efficient).
I measured the compile time for a large C++ file with tens of thousands
of functions and as expected there was no increase.
Reviewers: chandlerc, hfinkel, gchatelet
Subscribers: mehdi_amini, dexonsmith, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D67923
Summary:
This adds support for embedding bitcode in a binary during LTO. The libLTO gains supports the `-lto-embed-bitcode` flag. The option allows users of the LTO library to embed a bitcode section. For example, LLD can pass the option via `ld.lld -mllvm=-lto-embed-bitcode`.
This feature allows doing something comparable to `clang -c -fembed-bitcode`, but on the (LTO) linker level. Having bitcode alongside native code has many use-cases. To give an example, the MacOS linker can create a `-bitcode_bundle` section containing bitcode. Also, having this feature built into LLVM is an alternative to 3rd party tools such as [[ https://github.com/travitch/whole-program-llvm | wllvm ]] or [[ https://github.com/SRI-CSL/gllvm | gllvm ]]. As with these tools, this feature simplifies creating "whole-program" llvm bitcode files, but in contrast to wllvm/gllvm it does not rely on a specific llvm frontend/driver.
Patch by Josef Eisl <josef.eisl@oracle.com>
Reviewers: #llvm, #clang, rsmith, pcc, alexshap, tejohnson
Reviewed By: tejohnson
Subscribers: tejohnson, mehdi_amini, inglorion, hiraditya, aheejin, steven_wu, dexonsmith, dang, cfe-commits, llvm-commits, #llvm, #clang
Tags: #clang, #llvm
Differential Revision: https://reviews.llvm.org/D68213
This simplifies code where no extra details are required
Also don't write out detail when it is empty.
Differential Revision: https://reviews.llvm.org/D71347
Avoids the need to include TargetMachine.h from various places just for
an enum. Various other enums live here, such as the optimization level,
TLS model, etc. Data suggests that this change probably doesn't matter,
but it seems nice to have anyway.
This adds a flag to LLVM and clang to always generate a .debug_frame
section, even if other debug information is not being generated. In
situations where .eh_frame would normally be emitted, both .debug_frame
and .eh_frame will be used.
Differential Revision: https://reviews.llvm.org/D67216
Summary:
If we insert them from function pass some analysis may be missing or invalid.
Fixes PR42877.
Reviewers: eugenis, leonardchan
Reviewed By: leonardchan
Subscribers: hiraditya, cfe-commits, llvm-commits
Tags: #clang, #llvm
Differential Revision: https://reviews.llvm.org/D68832
> llvm-svn: 374481
Signed-off-by: Vitaly Buka <vitalybuka@google.com>
llvm-svn: 374527
Summary:
If we insert them from function pass some analysis may be missing or invalid.
Fixes PR42877.
Reviewers: eugenis, leonardchan
Reviewed By: leonardchan
Subscribers: hiraditya, cfe-commits, llvm-commits
Tags: #clang, #llvm
Differential Revision: https://reviews.llvm.org/D68832
llvm-svn: 374481
Summary:
This adds `-fwasm-exceptions` (in similar fashion with
`-fdwarf-exceptions` or `-fsjlj-exceptions`) that turns on everything
with wasm exception handling from the frontend to the backend.
We currently have `-mexception-handling` in clang frontend, but this is
only about the architecture capability and does not turn on other
necessary options such as the exception model in the backend. (This can
be turned on with `llc -exception-model=wasm`, but llc is not invoked
separately as a command line tool, so this option has to be transferred
from clang.)
Turning on `-fwasm-exceptions` in clang also turns on
`-mexception-handling` if not specified, and will error out if
`-mno-exception-handling` is specified.
Reviewers: dschuff, tlively, sbc100
Subscribers: aprantl, jgravelle-google, sunfish, cfe-commits
Tags: #clang
Differential Revision: https://reviews.llvm.org/D67208
llvm-svn: 371708
We're running into linker errors from missing sancov sections:
```
ld.lld: error: relocation refers to a discarded section: __sancov_guards
>>> defined in user-arm64-ubsan-sancov-full.shlib/obj/third_party/ulib/scudo/scudo.wrappers_c.cc.o
>>> referenced by common.h:26 (../../zircon/third_party/ulib/scudo/common.h:26)
... many other references
```
I believe this is due to a pass in the default pipeline that somehow discards
these sections. The ModuleSanitizerCoveragePass was initially added at the
start of the pipeline. This now adds it to the end of the pipeline for
optimized and unoptimized builds.
Differential Revision: https://reviews.llvm.org/D67323
llvm-svn: 371326
Clang patch to adapt to LLVM changes in D66428 that make the TLI
require a Function. There is no longer a module-level
TargetLibraryAnalysis, so remove its registration
llvm-svn: 371285
This patch merges the sancov module and funciton passes into one module pass.
The reason for this is because we ran into an out of memory error when
attempting to run asan fuzzer on some protobufs (pc.cc files). I traced the OOM
error to the destructor of SanitizerCoverage where we only call
appendTo[Compiler]Used which calls appendToUsedList. I'm not sure where precisely
in appendToUsedList causes the OOM, but I am able to confirm that it's calling
this function *repeatedly* that causes the OOM. (I hacked sancov a bit such that
I can still create and destroy a new sancov on every function run, but only call
appendToUsedList after all functions in the module have finished. This passes, but
when I make it such that appendToUsedList is called on every sancov destruction,
we hit OOM.)
I don't think the OOM is from just adding to the SmallSet and SmallVector inside
appendToUsedList since in either case for a given module, they'll have the same
max size. I suspect that when the existing llvm.compiler.used global is erased,
the memory behind it isn't freed. I could be wrong on this though.
This patch works around the OOM issue by just calling appendToUsedList at the
end of every module run instead of function run. The same amount of constants
still get added to llvm.compiler.used, abd we make the pass usage and logic
simpler by not having any inter-pass dependencies.
Differential Revision: https://reviews.llvm.org/D66988
llvm-svn: 370971
Match the behavior of D65009 under the new pass manager. This addresses
the test clang/test/CodeGen/split-lto-unit.c when running under the new
PM.
Differential Revision: https://reviews.llvm.org/D66488
llvm-svn: 369550
Now that we've moved to C++14, we no longer need the llvm::make_unique
implementation from STLExtras.h. This patch is a mechanical replacement
of (hopefully) all the llvm::make_unique instances across the monorepo.
Differential revision: https://reviews.llvm.org/D66259
llvm-svn: 368942
Summary: https://reviews.llvm.org/D50923 enabled the IR printing support for the new pass manager, but only for the case when `opt` tool is used as a driver. This patch is to enable the IR printing when `clang` is used as a driver.
Reviewers: fedor.sergeev, philip.pfaffe
Subscribers: cfe-commits, yamauchi, llvm-commits
Tags: #clang
Differential Revision: https://reviews.llvm.org/D65975
llvm-svn: 368804
Add PGO support at -O0 in the experimental new pass manager to sync the
behavior of the legacy pass manager.
Also change the test of gcc-flag-compatibility.c for more complete test:
(1) change the match string to "profc" and "profd" to ensure the
instrumentation is happening.
(2) add IR format proftext so that PGO use compilation is tested.
Differential Revision: https://reviews.llvm.org/D64029
llvm-svn: 367628
changes were made to the patch since then.
--------
[NewPM] Port Sancov
This patch contains a port of SanitizerCoverage to the new pass manager. This one's a bit hefty.
Changes:
- Split SanitizerCoverageModule into 2 SanitizerCoverage for passing over
functions and ModuleSanitizerCoverage for passing over modules.
- ModuleSanitizerCoverage exists for adding 2 module level calls to initialization
functions but only if there's a function that was instrumented by sancov.
- Added legacy and new PM wrapper classes that own instances of the 2 new classes.
- Update llvm tests and add clang tests.
llvm-svn: 367053
Summary:
Regular LTO modules do not need LTO Unit splitting, only ThinLTO does
(they must be consistently split into regular and Thin units for
optimizations such as whole program devirtualization and lower type
tests). In order to avoid spurious errors from LTO when combining with
split ThinLTO modules, always set this flag for regular LTO modules.
Reviewers: pcc
Subscribers: mehdi_amini, Prazek, inglorion, steven_wu, dexonsmith, cfe-commits
Tags: #clang
Differential Revision: https://reviews.llvm.org/D65009
llvm-svn: 366623
Summary:
This patch removes the `default` case from some switches on
`llvm::Triple::ObjectFormatType`, and cases for the missing enumerators
(`UnknownObjectFormat`, `Wasm`, and `XCOFF`) are then added.
For `UnknownObjectFormat`, the effect of the action for the `default`
case is maintained; otherwise, where `llvm_unreachable` is called,
`report_fatal_error` is used instead.
Where the `default` case returns a default value, `report_fatal_error`
is used for XCOFF as a placeholder. For `Wasm`, the effect of the action
for the `default` case in maintained.
The code is structured to avoid strongly implying that the `Wasm` case
is present for any reason other than to make the switch cover all
`ObjectFormatType` enumerator values.
Reviewers: sfertile, jasonliu, daltenty
Reviewed By: sfertile
Subscribers: hiraditya, aheejin, sunfish, llvm-commits, cfe-commits
Tags: #clang, #llvm
Differential Revision: https://reviews.llvm.org/D64222
llvm-svn: 366544
This will let us instrument globals during initialization. This required
making the new PM pass a module pass, which should still provide access to
analyses via the ModuleAnalysisManager.
Differential Revision: https://reviews.llvm.org/D64843
llvm-svn: 366379
This patch contains a port of SanitizerCoverage to the new pass manager. This one's a bit hefty.
Changes:
- Split SanitizerCoverageModule into 2 SanitizerCoverage for passing over
functions and ModuleSanitizerCoverage for passing over modules.
- ModuleSanitizerCoverage exists for adding 2 module level calls to initialization
functions but only if there's a function that was instrumented by sancov.
- Added legacy and new PM wrapper classes that own instances of the 2 new classes.
- Update llvm tests and add clang tests.
Differential Revision: https://reviews.llvm.org/D62888
llvm-svn: 365838
Summary:
The changes in D59673 made the choice redundant, since we can achieve
single-file split DWARF just by not setting an output file name.
Like llc we can also derive whether to enable Split DWARF from whether
-split-dwarf-file is set, so we don't need the flag at all anymore.
The test CodeGen/split-debug-filename.c distinguished between having set
or not set -enable-split-dwarf with -split-dwarf-file, but we can
probably just always emit the metadata into the IR.
The flag -split-dwarf wasn't used at all anymore.
Reviewers: dblaikie, echristo
Reviewed By: dblaikie
Differential Revision: https://reviews.llvm.org/D63167
llvm-svn: 364479
The option enables debug info about parameter's entry values.
The example of using the option:
clang -g -O2 -Xclang -femit-debug-entry-values test.c
In addition, when the option is set add the flag all_call_sites
in a subprogram in order to support GNU extension as well.
([3/13] Introduce the debug entry values.)
Co-authored-by: Ananth Sowda <asowda@cisco.com>
Co-authored-by: Nikola Prica <nikola.prica@rt-rk.com>
Co-authored-by: Ivan Baev <ibaev@cisco.com>
Differential Revision: https://reviews.llvm.org/D58033
llvm-svn: 364399
This fixes CodeGen/x86_64-instrument-functions.c when running under the new
pass manager. The pass should go before any other pass to prevent
`__cyg_profile_func_enter/exit()` from not being emitted by inlined functions.
Differential Revision: https://reviews.llvm.org/D63577
llvm-svn: 363969
Use -fsave-optimization-record=<format> to specify a different format
than the default, which is YAML.
For now, only YAML is supported.
llvm-svn: 363573
Summary:
With Split DWARF the resulting object file (then called skeleton CU)
contains the file name of another ("DWO") file with the debug info.
This can be a problem for remote compilation, as it will contain the
name of the file on the compilation server, not on the client.
To use Split DWARF with remote compilation, one needs to either
* make sure only relative paths are used, and mirror the build directory
structure of the client on the server,
* inject the desired file name on the client directly.
Since llc already supports the latter solution, we're just copying that
over. We allow setting the actual output filename separately from the
value of the DW_AT_[GNU_]dwo_name attribute in the skeleton CU.
Fixes PR40276.
Reviewers: dblaikie, echristo, tejohnson
Reviewed By: dblaikie
Differential Revision: https://reviews.llvm.org/D59673
llvm-svn: 363496
Summary:
This is the first in a series of changes trying to align clang -cc1
flags for Split DWARF with those of llc. The unfortunate side effect of
having -split-dwarf-output for single file Split DWARF will disappear
again in a subsequent change.
The change is the result of a discussion in D59673.
Reviewers: dblaikie, echristo
Reviewed By: dblaikie
Differential Revision: https://reviews.llvm.org/D63130
llvm-svn: 363494
This contains the part of D62225 which fixes CodeGen/split-debug-single-file.c
by not placing .dwo sections when using -enable-split-dwarf=split.
Differential Revision: https://reviews.llvm.org/D63168
llvm-svn: 363281
This contains the part of D62225 which fixes Profile/gcc-flag-compatibility.c
by adding the pass that allows default profile generation to work under the new
PM. It seems that ./default.profraw was not being generated with new PM enabled.
Differential Revision: https://reviews.llvm.org/D63155
llvm-svn: 363278
Part 2 (the Clang portion) of D59881.
This patch (first of two patches) enables the vectorizer to recognize the
IBM MASS vector library routines. This patch specifically adds support for
recognizing the -vector-library=MASSV option, and defines mappings from IEEE
standard scalar math functions to generic PowerPC MASS vector counterparts.
For instance, the generic PowerPC MASS vector entry for double-precision
cbrt function is __cbrtd2_massv.
The second patch will further lower the generic PowerPC vector entries to
PowerPC subtarget-specific entries.
For instance, the PowerPC generic entry cbrtd2_massv is lowered to
cbrtd2_P9 for Power9 subtarget.
The overall support for MASS vector library is presented as such in two patches
for ease of review.
Patch by Jeeva Paudel.
Differential revision: https://reviews.llvm.org/D59881
llvm-svn: 362571
Summary:
NewPassManager is not using CodeGenOpts values before this patch.
[to be coupled with D61616]
Reviewers: chandlerc
Subscribers: jlebar, cfe-commits, llvm-commits
Tags: #clang
Differential Revision: https://reviews.llvm.org/D61617
llvm-svn: 361534
Port hardware assisted address sanitizer to new PM following the same guidelines as msan and tsan.
Changes:
- Separate HWAddressSanitizer into a pass class and a sanitizer class.
- Create new PM wrapper pass for the sanitizer class.
- Use the getOrINsert pattern for some module level initialization declarations.
- Also enable kernel-kwasan in new PM
- Update llvm tests and add clang test.
Differential Revision: https://reviews.llvm.org/D61709
llvm-svn: 360707
While ASan and MSan passes were already ported to new PM, the kernel
variants weren't setup in the pipeline which makes the KASan and KMSan
tests in Clang fail.
Differential Revision: https://reviews.llvm.org/D61664
llvm-svn: 360313
This matches the behavior of the old pass manager. There are some
targets that don't have target machine at all (e.g. le32, spir) which
whose tests would never run with new pass manager. Similarly, we would
need to disable tests for targets that are disabled.
Differential Revision: https://reviews.llvm.org/D58374
llvm-svn: 360100
Currently InstrProf lowering is not enabled for Clang PGO instrumentation in
the new pass manager. The following command
"-fprofile-instr-generate -fexperimental-new-pass-manager ..." is broken.
This CL enables InstrProf lowering pass for Clang PGO instrumentation in the
new pass manager.
Differential Revision: https://reviews.llvm.org/D61138
llvm-svn: 359215
Summary:
The opt level was not being passed down to the ThinLTO backend when
invoked via clang (for distributed ThinLTO).
This exposed an issue where the new PM was asserting if the Thin or
regular LTO backend pipelines were invoked with -O0 (not a new issue,
could be provoked by invoking in-process *LTO backends via linker using
new PM and -O0). Fix this similar to the old PM where -O0 only does the
necessary lowering of type metadata (WPD and LowerTypeTest passes) and
then quits, rather than asserting.
Reviewers: xur
Subscribers: mehdi_amini, inglorion, eraman, hiraditya, steven_wu, dexonsmith, cfe-commits, llvm-commits, pcc
Tags: #clang, #llvm
Differential Revision: https://reviews.llvm.org/D61022
llvm-svn: 359025
This change adds hierarchical "time trace" profiling blocks that can be visualized in Chrome, in a "flame chart" style. Each profiling block can have a "detail" string that for example indicates the file being processed, template name being instantiated, function being optimized etc.
This is taken from GitHub PR: https://github.com/aras-p/llvm-project-20170507/pull/2
Patch by Aras Pranckevičius.
Differential Revision: https://reviews.llvm.org/D58675
llvm-svn: 357340
This patch adds an XCOFF triple object format type into LLVM.
This XCOFF triple object file type will be used later by object file and assembly generation for the AIX platform.
Differential Revision: https://reviews.llvm.org/D58930
llvm-svn: 355989
Currently we have -Rpass for filtering the remarks that are displayed as
diagnostics, but when using -fsave-optimization-record, there is no way
to filter the remarks while generating them.
This adds support for filtering remarks by passes using a regex.
Ex: `clang -fsave-optimization-record -foptimization-record-passes=inline`
will only emit the remarks coming from the pass `inline`.
This adds:
* `-fsave-optimization-record` to the driver
* `-opt-record-passes` to cc1
* `-lto-pass-remarks-filter` to the LTOCodeGenerator
* `--opt-remarks-passes` to lld
* `-pass-remarks-filter` to llc, opt, llvm-lto, llvm-lto2
* `-opt-remarks-passes` to gold-plugin
Differential Revision: https://reviews.llvm.org/D59268
Original llvm-svn: 355964
llvm-svn: 355984
Currently we have -Rpass for filtering the remarks that are displayed as
diagnostics, but when using -fsave-optimization-record, there is no way
to filter the remarks while generating them.
This adds support for filtering remarks by passes using a regex.
Ex: `clang -fsave-optimization-record -foptimization-record-passes=inline`
will only emit the remarks coming from the pass `inline`.
This adds:
* `-fsave-optimization-record` to the driver
* `-opt-record-passes` to cc1
* `-lto-pass-remarks-filter` to the LTOCodeGenerator
* `--opt-remarks-passes` to lld
* `-pass-remarks-filter` to llc, opt, llvm-lto, llvm-lto2
* `-opt-remarks-passes` to gold-plugin
Differential Revision: https://reviews.llvm.org/D59268
llvm-svn: 355964
It hasn't seen active development in years, and it hasn't reached a
state where it was useful.
Remove the code until someone is interested in working on it again.
Differential Revision: https://reviews.llvm.org/D59133
llvm-svn: 355862
Part 1 of CSPGO change in Clang. This includes changes in clang options
and calls to llvm PassManager. Tests will be committed in part2.
This change needs the PassManager change in llvm.
Differential Revision: https://reviews.llvm.org/D54176
llvm-svn: 355331
This is the second attempt to port ASan to new PM after D52739. This takes the
initialization requried by ASan from the Module by moving it into a separate
class with it's own analysis that the new PM ASan can use.
Changes:
- Split AddressSanitizer into 2 passes: 1 for the instrumentation on the
function, and 1 for the pass itself which creates an instance of the first
during it's run. The same is done for AddressSanitizerModule.
- Add new PM AddressSanitizer and AddressSanitizerModule.
- Add legacy and new PM analyses for reading data needed to initialize ASan with.
- Removed DominatorTree dependency from ASan since it was unused.
- Move GlobalsMetadata and ShadowMapping out of anonymous namespace since the
new PM analysis holds these 2 classes and will need to expose them.
Differential Revision: https://reviews.llvm.org/D56470
llvm-svn: 353985
Summary:
This adds support for new-PM plugin loading to clang. The option
`-fpass-plugin=` may be used to specify a dynamic shared object file
that adheres to the PassPlugin API.
Tested: created simple plugin that registers an EP callback; with optimization level > 0, the pass is run as expected.
Committed on behalf of Marco Elver
Differential Revision: https://reviews.llvm.org/D56935
llvm-svn: 352972
to reflect the new license.
We understand that people may be surprised that we're moving the header
entirely to discuss the new license. We checked this carefully with the
Foundation's lawyer and we believe this is the correct approach.
Essentially, all code in the project is now made available by the LLVM
project under our new license, so you will see that the license headers
include that license only. Some of our contributors have contributed
code under our old license, and accordingly, we have retained a copy of
our old license notice in the top-level files in each project and
repository.
llvm-svn: 351636
Summary: This is the missing bit to drive thread and memory sanitizers through clang using the new PassManager.
Reviewers: chandlerc, fedor.sergeev, vitalybuka, leonardchan
Subscribers: bollu, llvm-commits
Differential Revision: https://reviews.llvm.org/D56831
llvm-svn: 351423
Hongtao Yu