Using a DebugVariable as the set key rather than std::pair<DIVariable *,
DIExpression *> ensures we don't accidently confuse multiple instances of
inlined variables.
Reviewed By: jryans
Differential Revision: https://reviews.llvm.org/D133303
breakLoopBackedge may remove blocks and loops. Also clear block &
loop disposition to avoid the cache containing invalid blocks and loops.
The coverage for the change is provided when using an ASAN build of opt
to run the LoopDeletion unit tests; without the fix, pointers to invalid
objects would be used.
Reviewed By: nikic
Differential Revision: https://reviews.llvm.org/D134663
After deleting a loop, the block and loop dispositions need to be
cleared. As we don't know which SCEVs in the loop/blocks may be
impacted, completely clear the cache. This should also fix some cases
where deleted loops remained in the LoopDispositions cache.
This fixes a verification failure surfaced by D134531.
Reviewed By: mkazantsev
Differential Revision: https://reviews.llvm.org/D134613
I'm planning to deprecate and eventually remove llvm::empty.
I thought about replacing llvm::empty(x) with std::empty(x), but it
turns out that all uses can be converted to x.empty(). That is, no
use requires the ability of std::empty to accept C arrays and
std::initializer_list.
Differential Revision: https://reviews.llvm.org/D133677
This fixes https://github.com/llvm/llvm-project/issues/57336. It was exposed by a recent SCEV change, but appears to have been a long standing issue.
Note that the whole insert into the loop instead of a split exit edge is slightly contrived to begin with; it's there solely because IndVarSimplify preserves the CFG.
Differential Revision: https://reviews.llvm.org/D132571
In this patch we replace common code patterns with the use of utility
functions for dealing with profiling metadata. There should be no change
in functionality, as the existing checks should be preserved in all
cases.
Reviewed By: bogner, davidxl
Differential Revision: https://reviews.llvm.org/D128860
In this patch we replace common code patterns with the use of utility
functions for dealing with profiling metadata. There should be no change
in functionality, as the existing checks should be preserved in all
cases.
Reviewed By: bogner, davidxl
Differential Revision: https://reviews.llvm.org/D128860
isSafeToExpand() for addrecs depends on whether the SCEVExpander
will be used in CanonicalMode. At least one caller currently gets
this wrong, resulting in PR50506.
Fix this by a) making the CanonicalMode argument on the freestanding
functions required and b) adding member functions on SCEVExpander
that automatically take the SCEVExpander mode into account. We can
use the latter variant nearly everywhere, and thus make sure that
there is no chance of CanonicalMode mismatch.
Fixes https://github.com/llvm/llvm-project/issues/50506.
Differential Revision: https://reviews.llvm.org/D129630
Fix bug exposed by https://reviews.llvm.org/D125990
rewriteLoopExitValues calls InductionDescriptor::isInductionPHI which requires
the PHI node to have an incoming edge from the loop preheader. This adds checks
before calling InductionDescriptor::isInductionPHI to see that the loop has a
preheader. Also did some refactoring.
Differential Revision: https://reviews.llvm.org/D129297
SplitBlockPredecessors currently asserts if one of the predecessor
terminators is a callbr. This limitation was originally necessary,
because just like with indirectbr, it was not possible to replace
successors of a callbr. However, this is no longer the case since
D67252. As the requirement nowadays is that callbr must reference
all blockaddrs directly in the call arguments, and these get
automatically updated when setSuccessor() is called, we no longer
need this limitation.
The only thing we need to do here is use replaceSuccessorWith()
instead of replaceUsesOfWith(), because only the former does the
necessary blockaddr updating magic.
I believe there's other similar limitations that can be removed,
e.g. related to critical edge splitting.
Differential Revision: https://reviews.llvm.org/D129205
LoopSimplify only requires that the loop predecessor has a single
successor and is safe to hoist into -- it doesn't necessarily have
to be an unconditional BranchInst.
Adjust LoopDeletion to assert conditions closer to what it actually
needs for correctness, namely a single successor and a
side-effect-free terminator (as the terminator is getting dropped).
Fixes https://github.com/llvm/llvm-project/issues/56266.
This reverts commit 7aa8a67882.
This version includes fixes to address issues uncovered after
the commit landed and discussed at D11448.
Those include:
* Limit select-traversal to selects inside the loop.
* Freeze pointers resulting from looking through selects to avoid
branch-on-poison.
Need to use all ReductionOps when propagating flags for the reduction
ops, otherwise transformation is not correct. Plus, need to drop nuw/nsw
flags.
Differential Revision: https://reviews.llvm.org/D126371
This patch adds initial support for a pointer diff based runtime check
scheme for vectorization. This scheme requires fewer computations and
checks than the existing full overlap checking, if it is applicable.
The main idea is to only check if source and sink of a dependency are
far enough apart so the accesses won't overlap in the vector loop. To do
so, it is sufficient to compute the difference and compare it to the
`VF * UF * AccessSize`. It is sufficient to check
`(Sink - Src) <u VF * UF * AccessSize` to rule out a backwards
dependence in the vector loop with the given VF and UF. If Src >=u Sink,
there is not dependence preventing vectorization, hence the overflow
should not matter and using the ULT should be sufficient.
Note that the initial version is restricted in multiple ways:
1. Pointers must only either be read or written, by a single
instruction (this allows re-constructing source/sink for
dependences with the available information)
2. Source and sink pointers must be add-recs, with matching steps
3. The step must be a constant.
3. abs(step) == AccessSize.
Most of those restrictions can be relaxed in the future.
See https://github.com/llvm/llvm-project/issues/53590.
Reviewed By: dmgreen
Differential Revision: https://reviews.llvm.org/D119078
The code claimed to handle nsw/nuw, but those aren't passed via builder state and the explicit IR construction just above never sets them.
The only case this bit of code is actually relevant for is FMF flags. However, dropPoisonGeneratingFlags currently doesn't know about FMF at all, so this was a noop. It's also unneeded, as the caller explicitly configures the flags on the builder before this call, and the flags on the individual ops should be controled by the intrinsic flags anyways. If any of the flags aren't safe to propagate, the caller needs to make that change.
The recurrence lowering code has handling which claims to be about flag intersection, but all the callers pass empty arrays to the arguments. The sole exception is a caller of a method which has the argument, but no implementation.
I don't know what the intent was here, but it certaintly doesn't actually do anything today.
This change allows us to estimate trip count from profile metadata for all multiple exit loops. We still do the estimate only from the latch, but that's fine as it causes us to over estimate the trip count at worst.
Reviewing the uses of the API, all but one are cases where we restrict a loop transformation (unroll, and vectorize respectively) when we know the trip count is short enough. So, as a result, the change makes these passes strictly less aggressive. The test change illustrates a case where we'd previously have runtime unrolled a loop which ran fewer iterations than the unroll factor. This is definitely unprofitable.
The one case where an upper bound on estimate trip count could drive a more aggressive transform is peeling, and I duplicated the logic being removed from the generic estimation there to keep it the same. The resulting heuristic makes no sense and should probably be immediately removed, but we can do that in a separate change.
This was noticed when analyzing regressions on D113939.
I plan to come back and incorporate estimated trip counts from other exits, but that's a minor improvement which can follow separately.
Differential Revision: https://reviews.llvm.org/D115362
At the moment, rewriteLoopExitValue forgets the current phi node in the
loop that collects phis to rewrite. A few lines after the value is
forgotten, SCEV is used again to analyze incoming values and
potentially expand SCEV expression. This means that another SCEV is
created for PN, before the IR is actually updated in the next loop.
This leads to accessing invalid cached expression in combination with
D71539.
PN should only be changed once the actual incoming exit value is set in
the next loop. Moving invalidation there should ensure that PN is
invalidated in all relevant cases.
Reviewed By: mkazantsev
Differential Revision: https://reviews.llvm.org/D111495
This simplifies the return value of addRuntimeCheck from a pair of
instructions to a single `Value *`.
The existing users of addRuntimeChecks were ignoring the first element
of the pair, hence there is not reason to track FirstInst and return
it.
Additionally all users of addRuntimeChecks use the second returned
`Instruction *` just as `Value *`, so there is no need to return an
`Instruction *`. Therefore there is no need to create a redundant
dummy `and X, true` instruction any longer.
Effectively this change should not impact the generated code because the
redundant AND will be folded by later optimizations. But it is easy to
avoid creating it in the first place and it allows more accurately
estimating the cost of the runtime checks.
This patch adds further support for vectorisation of loops that involve
selecting an integer value based on a previous comparison. Consider the
following C++ loop:
int r = a;
for (int i = 0; i < n; i++) {
if (src[i] > 3) {
r = b;
}
src[i] += 2;
}
We should be able to vectorise this loop because all we are doing is
selecting between two states - 'a' and 'b' - both of which are loop
invariant. This just involves building a vector of values that contain
either 'a' or 'b', where the final reduced value will be 'b' if any lane
contains 'b'.
The IR generated by clang typically looks like this:
%phi = phi i32 [ %a, %entry ], [ %phi.update, %for.body ]
...
%pred = icmp ugt i32 %val, i32 3
%phi.update = select i1 %pred, i32 %b, i32 %phi
We already detect min/max patterns, which also involve a select + cmp.
However, with the min/max patterns we are selecting loaded values (and
hence loop variant) in the loop. In addition we only support certain
cmp predicates. This patch adds a new pattern matching function
(isSelectCmpPattern) and new RecurKind enums - SelectICmp & SelectFCmp.
We only support selecting values that are integer and loop invariant,
however we can support any kind of compare - integer or float.
Tests have been added here:
Transforms/LoopVectorize/AArch64/sve-select-cmp.ll
Transforms/LoopVectorize/select-cmp-predicated.ll
Transforms/LoopVectorize/select-cmp.ll
Differential Revision: https://reviews.llvm.org/D108136
We need to be better at exposing the comparison predicate to getCmpSelInstrCost calls as some targets (e.g. X86 SSE) have very different costs for different comparisons (PR48337), and we can't always rely on the optional Instruction argument.
This initial commit requires explicit condition type and predicate arguments. The next step will be to review a lot of the existing getCmpSelInstrCost calls which have used BAD_ICMP_PREDICATE even when the predicate is known.
Differential Revision: https://reviews.llvm.org/D111024
This patch adds further support for vectorisation of loops that involve
selecting an integer value based on a previous comparison. Consider the
following C++ loop:
int r = a;
for (int i = 0; i < n; i++) {
if (src[i] > 3) {
r = b;
}
src[i] += 2;
}
We should be able to vectorise this loop because all we are doing is
selecting between two states - 'a' and 'b' - both of which are loop
invariant. This just involves building a vector of values that contain
either 'a' or 'b', where the final reduced value will be 'b' if any lane
contains 'b'.
The IR generated by clang typically looks like this:
%phi = phi i32 [ %a, %entry ], [ %phi.update, %for.body ]
...
%pred = icmp ugt i32 %val, i32 3
%phi.update = select i1 %pred, i32 %b, i32 %phi
We already detect min/max patterns, which also involve a select + cmp.
However, with the min/max patterns we are selecting loaded values (and
hence loop variant) in the loop. In addition we only support certain
cmp predicates. This patch adds a new pattern matching function
(isSelectCmpPattern) and new RecurKind enums - SelectICmp & SelectFCmp.
We only support selecting values that are integer and loop invariant,
however we can support any kind of compare - integer or float.
Tests have been added here:
Transforms/LoopVectorize/AArch64/sve-select-cmp.ll
Transforms/LoopVectorize/select-cmp-predicated.ll
Transforms/LoopVectorize/select-cmp.ll
Differential Revision: https://reviews.llvm.org/D108136
This is a case I'd missed in 6a8237. The odd bit here is that missing the edge removal update seems to produce MemorySSA which verifies, but is still corrupt in a way which bothers following passes. I wasn't able to reduce a single pass test case, which is why the reported test case is taken as is.
Differential Revision: https://reviews.llvm.org/D109068
Previously, we'd expand *ALL* the SCEV's eagerly, because we needed to
check with `isValidRewrite()`, and discard bad rewrite candidates,
but now that we do not do that, we also don't need to always expand.
In particular, this avoids expanding potentially-huge SCEV's that we
would discard anyways because they are high-cost and we aren't
rewriting aggressively.
`isValidRewrite()` checks that the both the original SCEV,
and the rewrite SCEV have the same base pointer.
I //believe//, after all the recent SCEV improvements,
this invariant is already enforced by SCEV itself.
I originally tried changing it into an assert in D108043,
but that showed that it triggers on e.g. https://reviews.llvm.org/D108043#2946621,
where SCEV manages to forward the store to load,
test added.
Reviewed By: nikic
Differential Revision: https://reviews.llvm.org/D108655
Changes since aec08e:
* Adjust placement of a closing brace so that the general case actually runs. Turns out we had *no* coverage of the switch case. I added one in eae90fd.
* Drop .llvm.loop.* metadata from the new branch as there is no longer a loop to annotate.
Original commit message:
This special cases an unconditional latch and a conditional branch latch exit to improve codegen and test readability. I am hoping to reuse this function in the runtime unroll code, but without this change, the test diffs are far too complex to assess.
Kazu Hirata