an empty Python string object when it reads a 0-length
string out of memory (and a successful SBError object).
<rdar://problem/26186692>
llvm-svn: 321338
Also add a test. There should also be control for this
in ProcessLaunchInfo and a "target launch" flag, but at least
this will allow you to control it somehow.
<rdar://problem/35842137>
llvm-svn: 319731
Summary:
This flag is on by default for darwin and freebsd, but off for linux.
Without it, clang will sometimes not emit debug info for types like
std::string. Whether it does this, and which tests will fail because of
that depends on the linux distro and c++ library version.
A bunch of tests were already setting these flags manually, but here
instead I take a whole sale approach and enable this flag for all tests.
Any test which does not want to have this flag (right now we have one
such test) can turn it off explicitly via
CFLAGS_EXTRAS+=$(LIMIT_DEBUG_INFO_FLAGS)
This fixes a bunch of data formatter tests on red-hat.
Reviewers: davide, jankratochvil
Subscribers: emaste, aprantl, krytarowski, JDevlieghere, lldb-commits
Differential Revision: https://reviews.llvm.org/D40717
llvm-svn: 319653
unambiguously on one bit of code. On macOS these
lines mapped to two distinct locations, and that
was artificially throwing off the test.
llvm-svn: 319472
Summary:
New linux kernels (on systems that support the XSAVES instruction) will
not update the inferior registers unless the corresponding flag in the
XSAVE header is set. Normally this flag will be set in our image of the
XSAVE area (since we obtained it from the kernel), but if the inferior
has never used the corresponding register set, the respective flag can
be clear.
This fixes the issue by making sure we explicitly set the flags
corresponding to the registers we modify. I don't try to precisely match
the flags to set on each write, as the rules could get quite complicated
-- I use a simpler over-approximation instead.
This was already caught by test_fp_register_write, but that was only
because the code that ran before main() did not use some of the register
sets. Since nothing in this test relies on being stopped in main(), I
modify the test to stop at the entry point instead, so we can be sure
the inferior did not have a chance to access these registers.
Reviewers: clayborg, valentinagiusti
Subscribers: lldb-commits
Differential Revision: https://reviews.llvm.org/D40434
llvm-svn: 319161
r317561 exposed an interesting bug (pr35228) in handling of simultaneous
watchpoint hits. Disabling the test until we can get that fixed.
llvm-svn: 317683
Summary:
The test incremented an atomic varible to trigger the watchpoint event.
On arm64 this compiled to a ldaxr/stlxr loop, with the watchpoint being
triggered in the middle of the loop. Hitting the watchpoint resets the
exclusive monitor, and forces the process to loop one more time, hitting
the watchpoint again, etc.
While it would be nice if the debugger was able to resume from this
situation, this is not trivial, and is not what this test is about.
Therefore, I propose to change this to a simple store to a normal
variable (which should still trip the watchpoint everywhere, but without
atomic loops) and file a bug to investigate the possibilities of
handling the watchpoints in atomic loops in a more reasonable way.
Reviewers: clayborg
Subscribers: aemerson, kristof.beyls, lldb-commits
Differential Revision: https://reviews.llvm.org/D39680
llvm-svn: 317561
Summary:
This mechanism was mostly redundant with the file-based .categories
mechanism, and it was interfering with it, as any test which implemented
a getCategories method would not inherit the filesystem categories.
This patch removes it. The existing categories are preserved either by
adding a .categories file, or using the @add_test_categories decorator.
Reviewers: jingham, clayborg, zturner
Subscribers: lldb-commits
Differential Revision: https://reviews.llvm.org/D39515
llvm-svn: 317277
Now that the wathpoint tests have their own category, we can easily skip
them on devices which don't have watchpoint support. Therefore, we don't
need an android xfail on each of these tests.
llvm-svn: 317276
Summary:
std::queue is just a fancy wrapper around another container, so all we
need to do is to delegate to the it.
Reviewers: jingham, EricWF
Subscribers: srhines, mgorny, lldb-commits, eugene
Differential Revision: https://reviews.llvm.org/D35666
llvm-svn: 317099
Most of the watchpoint tests are organized into subtrees, so we can use the
file-based .categories approach to annotate them. The exception are the
concurrent_events tests, which needed to be annotated on a per-test basis.
The motivation behind this is to provide an easy way to disable watchpoint
tests on systems where the watchpoint functionality is not present/unreliable.
llvm-svn: 317004
Summary:
This adds a data formatter for the implementation of forward_list in
libc++. I've refactored the existing std::list data formatter a bit to
enable more sharing of code (mainly the loop detection stuff).
Reviewers: jingham, EricWF
Subscribers: srhines, eugene, lldb-commits
Differential Revision: https://reviews.llvm.org/D35556
llvm-svn: 316992
The test was asserting that we can only find one frame in the minidump.
Now that we have the default unwind plan from the ABI plugin, we are
able to find 5 more frames using the frame pointer chaining. Correct the
expectation in the test.
llvm-svn: 316688
The core of this change is the new CommandInterpreter::m_command_state,
which models the state transitions for interactive commands, including
an "interrupted" state transition.
In general, command interruption requires cooperation from the code
executing the command, which needs to poll for interruption requests
through CommandInterpreter::WasInterrupted().
CommandInterpreter::PrintCommandOutput() implements an optionally
interruptible printing of the command output, which for large outputs
was likely the longest blocking part.
(ex. target modules dump symtab on a complex binary could take 10+ minutes)
Differential Revision: https://reviews.llvm.org/D37923
llvm-svn: 315037
running watchos. These tests cannot run on normal customer devices,
but I hope to some day have a public facing bot running against a
device.
llvm-svn: 314355
in TestDataFormatterSkipSummary.py - I'm building this test
with the default c++ library.
Skip TestMTCSimple.py when running for i386.
llvm-svn: 314155
Normal customer devices won't be able to run these tests, we're hoping to get
a public facing bot set up at some point. Both devices pass the testsuite without
any errors or failures.
I have seen some instability with the armv7 test runs, I may submit additional patches
to address this. arm64 looks good.
I'll be watching the bots for the rest of today; if any problems are introduced by
this patch I'll revert it - if anyone sees a problem with their bot that I don't
see, please do the same. I know it's a rather large patch.
One change I had to make specifically for iOS devices was that debugserver can't
create files. There were several tests that launch the inferior process redirecting
its output to a file, then they retrieve the file. They were not trying to test
file redirection in these tests, so I rewrote those to write their output to a file
directly.
llvm-svn: 314132
Normal customer devices won't be able to run these devices, we're hoping to get
a public facing bot set up at some point. Both devices pass the testsuite without
any errors or failures.
I have seen some instability with the armv7 test runs, I may submit additional patches
to address this. arm64 looks good.
I'll be watching the bots for the rest of today; if any problems are introduced by
this patch I'll revert it - if anyone sees a problem with their bot that I don't
see, please do the same. I know it's a rather large patch.
One change I had to make specifically for iOS devices was that debugserver can't
create files. There were several tests that launch the inferior process redirecting
its output to a file, then they retrieve the file. They were not trying to test
file redirection in these tests, so I rewrote those to write their output to a file
directly.
llvm-svn: 314038
Normal customer devices won't be able to run these devices, we're hoping to get
a public facing bot set up at some point.
There will be some smaller follow-on patches. The changes to tools/lldb-server are
verbose and I'm not thrilled with having to skip all of these tests manually.
There are a few places where I'm making the assumption that "armv7", "armv7k", "arm64"
means it's an ios device, and I need to review & clean these up with an OS check
as well. (Android will show up as "arm" and "aarch64" so by pure luck they shouldn't
cause problems, but it's not an assumption I want to rely on).
I'll be watching the bots for the rest of today; if any problems are introduced by
this patch I'll revert it - if anyone sees a problem with their bot that I don't
see, please do the same. I know it's a rather large patch.
One change I had to make specifically for iOS devices was that debugserver can't
create files. There were several tests that launch the inferior process redirecting
its output to a file, then they retrieve the file. They were not trying to test
file redirection in these tests, so I rewrote those to write their output to a file
directly.
llvm-svn: 313932
The main change is to avoid setting the process state as running when
debugging core/minidumps (details in the bug). Also included a few small,
related fixes around how the errors propagate in this case.
Fixed the FreeBSD/Windows break: the intention was to keep
Process::WillResume() and Process::DoResume() "in-sync", but this had the
unfortunate consequence of breaking Process sub-classes which don't override
WillResume().
The safer approach is to keep Process::WillResume() untouched and only
override it in the minidump and core implementations.
patch by lemo
Bug: https://bugs.llvm.org/show_bug.cgi?id=34532
Differential Revision: https://reviews.llvm.org/D37651
llvm-svn: 313655
When introduced, breakpoint names were just tags that you could
apply to breakpoints that would allow you to refer to a breakpoint
when you couldn't capture the ID, or to refer to a collection of
breakpoints.
This change makes the names independent holders of breakpoint options
that you can then apply to breakpoints when you add the name to the
breakpoint. It adds the "breakpoint name configure" command to set
up or reconfigure breakpoint names. There is also full support for
then in the SB API, including a new SBBreakpointName class.
The connection between the name and the breakpoints
sharing the name remains live, so if you reconfigure the name, all the
breakpoint options all change as well. This allows a quick way
to share complex breakpoint behavior among a bunch of breakpoints, and
a convenient way to iterate on the set.
You can also create a name from a breakpoint, allowing a quick way
to copy options from one breakpoint to another.
I also added the ability to make hidden and delete/disable protected
names. When applied to a breakpoint, you will only be able to list,
delete or disable that breakpoint if you refer to it explicitly by ID.
This feature will allow GUI's that need to use breakpoints for their
own purposes to keep their breakpoints from getting accidentally
disabled or deleted.
<rdar://problem/22094452>
llvm-svn: 313292
The auto-continue test was using the new (better) name
for providing commands (-C) but I haven't checked in that change
yet. Put the test back to the old way for now.
llvm-svn: 313221
The main change is to avoid setting the process state as running when
debugging core/minidumps (details in the bug).
Also included a few small, related fixes around how the errors propagate in
this case.
patch by lemo
Bug: https://bugs.llvm.org/show_bug.cgi?id=34532
Differential Revision: https://reviews.llvm.org/D37651
llvm-svn: 313210
On Windows a process can't delete its own current direcotry, that's why the test
needs to return to the original direcotry before removing newdir.
llvm-svn: 313113
The FXSAVE member `ftw` (FPU Tag Word) was given the wrong size (8-bit)
instead of the correct width (16-bit) as per the x87 Programmer's
Manual. Adjust this to ensure that we print out the complete value for
the register.
llvm-svn: 311579
This is the FreeBSD equivalent of r238549.
This serves 2 purposes:
* LLDB should handle inferior process signals SIGSEGV/SIGILL/SIGBUS/
SIGFPE the way it is suppose to be handled. Prior to this fix these
signals will neither create a coredump, nor exit from the debugger
or work for signal handling scenario.
* eInvalidCrashReason need not report "unknown crash reason" if we have
a valid si_signo
llvm.org/pr23699
Patch by Karnajit Wangkhem
Differential Revision: https://reviews.llvm.org/D35223
llvm-svn: 310591
Summary:
The available platform list was previously only accessible via the
`platform list` command, this patch makes it possible to access that
list via the SBDebugger API. The active platform list has likewise
been exposed via the SBDebugger API.
Differential Revision: https://reviews.llvm.org/D35760
llvm-svn: 310452
You can get a breakpoint to auto-continue by adding "continue"
as a command, but that has the disadvantage that if you hit two
breakpoints simultaneously, the continue will force the process
to continue, and maybe even forstalling the commands on the other.
The auto-continue flag means the breakpoints can negotiate about
whether to stop.
Writing tests, I wanted to supply some commands when I made the
breakpoints, so I also added that ability.
llvm-svn: 309969
When an option was set at on a location, I was just copying the whole option set
to the location, and letting it shadow the breakpoint options. That was wrong since
it meant changes to unrelated options on the breakpoint would no longer take on this
location. I added a mask of set options and use that for option propagation.
I also added a "location" property to breakpoints, and added SBBreakpointLocation.{G,S}etCommandLineCommands
since I wanted to use them to write some more test cases.
<rdar://problem/24397798>
llvm-svn: 309772
Summary:
SBBreakpointLocation exposed the ignore count, but didn't expose
the hit count. Both values were exposed by SBBreakpoint and
SBWatchpoint, so this makes things a bit more consistent.
Reviewers: lldb-commits
Subscribers: lldb-commits
Differential Revision: https://reviews.llvm.org/D31283
llvm-svn: 308480
In NativeProcessLinux::MonitorSIGTRAP we were asserting that the si_code
value is one of the codes we know about. However, that list was very
incomplete -- for example, we were not handling SI_TKILL/SI_USER,
generated by raise(SIGTRAP). A cursory examination show there are at
least a dozen codes like these that an app can generate, and more can be
added at any point.
So, instead of trying to play catchup, I change the default behavior to
treat an unknown si_code like an ordinary signal. The only reason we
needed to inspect si_code in the first place is because
watchpoint/breakpoints are notified as SIGTRAP, but we already know
about those, and us starting to use a new debug event is far less likely
than somebody introducing a new non-debug event.
I add a test case to TestRaise to verify we are handling raise(SIGTRAP)
in an application properly.
llvm-svn: 307644
Starting with android ndk r15, clang much more tests are affected by the
-mstackrealign bugl (now nearly all functions are affected, and not just
the ones requiring 16-byte alignment). Due to their numbers, Xfailing
all of them is not a viable option, so we will just have to declare this
configuration unsupported, and wait until ndk ships a clang version that
has this bug fixed.
llvm-svn: 307252
This adds a simple testcase for MainThreadCheckerRuntime. The tool (Main Thread Checker) is only available on Darwin, so the test also detects the presence of libMainThreadChecker.dylib and is skipped if the tool is not available.
llvm-svn: 307170
All android builds systems have switched to -mstackrealign for building
x86 binaries, so follow their cue with our mini build system.
This presently breaks just one test (TestReturnValue), and this is due
to a compiler bug, which has already been fixed in clang, but it hasn't
made it yet into the official NDK compiler. While I'm touching that
test, I also remove an android-specific XFAIL, which is not relevant
anymore.
llvm-svn: 306683
This patch introduces a new thread backtrace command "unique".
The command is based off of "thread backtrace all" but will instead
find all threads which share matching call stacks and de-duplicate
their output, listing call stack and all the threads which share it.
This is especially useful for apps which use thread/task pools
sitting around waiting for work and cause excessive duplicate output.
I needed this behavior recently when debugging a core with 700+ threads.
Differential Revision: https://reviews.llvm.org/D33426
Reviewers: clayborg, jingham
Patch by Brian Gianforcaro <b.gianfo@gmail.com>
llvm-svn: 305197
I was over-eager to unable this test in r304976. It still fails in this
combination, at there does not seem to be anything we can do about it,
as the generated code does not preserve the link register.
llvm-svn: 305062
Summary:
When a call instruction is the last instruction in a function, the
backtrace PC will point past the end of the function. We already had
special code to handle that, but we did not handle the case where the PC
ends up outside of the bounds of the module containing the function,
which is a situation that occured in TestNoreturnUnwind on android for
some arch/compiler combinations.
I fix this by adding an argument to Address resolution code which states
that we are ok with addresses pointing to the end of a module/section to
resolve to that module/section.
I create a reproducible test case for this situation by hand-crafting an
executable which has a noreturn function at the end of a module.
Reviewers: jasonmolenda, jingham
Subscribers: lldb-commits
Differential Revision: https://reviews.llvm.org/D32022
llvm-svn: 304976
as described in pr33042, we cannot reliably retrieve the return value on
arm64 in cases it is returned via x8 pointer. I tried to do this as
surgically as possible and disabled it only on targets I know to be
affected, as the code is still useful, even though it can only work on
best-effort basis.
llvm-svn: 303076
Summary:
Arm64 Procedure Call Standard specifies than only vectors up to 16 bytes
are stored in v0 (which makes sense, as that's the size of the
register). 32-byte vector types are passed as regular structs via x8
pointer. Treat them as such.
This fixes TestReturnValue for arm64-clang. I also split the test case
into two so I can avoid the if(gcc) line, and annotate each test
instead. (It seems the vector type tests fail with gcc only when
targetting x86 arches).
Reviewers: tberghammer, eugene
Subscribers: aemerson, omjavaid, rengolin, srhines, lldb-commits
Differential Revision: https://reviews.llvm.org/D32813
llvm-svn: 302220
Summary:
The existing cpp-level checks using PR_MPX_ENABLE_MANAGEMENT aren't sufficient,
as this isn't defined for linux kernel versions below 3.19.
Reviewers: valentinagiusti, zturner, labath
Subscribers: lldb-commits
Differential Revision: https://reviews.llvm.org/D32719
llvm-svn: 302027
Summary:
MergeFrom was updating the architecture if the target triple did not
have it set. However, it was leaving the core field as invalid. This
resulted in assertion failures in core file tests as a missing core
meant we were unable to compute the address byte size properly.
Add a unit test for the new behaviour.
Reviewers: jingham, clayborg
Subscribers: lldb-commits
Differential Revision: https://reviews.llvm.org/D32221
llvm-svn: 300836
I thought my previous commit got the last ones but somehow I missed
these. This also resurrects TestDataFormatterLibcxxSet, which got
commented out in r263859 as a part of some seemingly unrelated change.
llvm-svn: 300833
r285226 dropped the code that did these checks. I am pretty
sure that was inadvertent, so I added that back in and added
a test for it.
<rdar://problem/31661252>
llvm-svn: 300564
Summary:
The iteration list through the available data formatters was undefined,
which meant that the vector<bool> formatter kicked in only in cases
where it happened to be queried before the general vector formatter. To
fix this, I merge the two data formatter entries into one, and select
which implementation to use in the factory function.
Reviewers: jasonmolenda, tberghammer, EricWF
Subscribers: lldb-commits
Differential Revision: https://reviews.llvm.org/D31880
llvm-svn: 300047
gcc emits DW_LANG_C89 even if we specify -std=c99 during compilation.
Since this isn't an lldb bug, but just the way the compiler happens to
be implemented, I teach the test to expect this situation correctly.
llvm-svn: 300046
I have put them all in their own category, and made that category disabled by default.
Differential revision: https://reviews.llvm.org/D31718
llvm-svn: 299587
look showed that the target's arch has no core / byte order and so when
AuxVector::AuxVector calls into a dataextractor and sets the byte size to 0,
it asserts. e.g.
m_arch = {
m_triple = (Data = "x86_64--linux", Arch = x86_64, SubArch = NoSubArch, Vendor = UnknownVendor, OS = Linux, Environment = UnknownEnvironment, ObjectFormat = ELF)
m_core = kCore_invalid
m_byte_order = eByteOrderInvalid
m_flags = 0x00000000
m_distribution_id = <no value available>
}
<rdar://problem/31380097>
llvm-svn: 299408
Summary:
After this change a sythetic child provider can generate a special child
named "$$dereference$$" what if present is used when "operator*" or
"operator->" used on a ValueObject. The goal of the change is to make
expressions like "up->foo" work inside the "frame variable" command.
Reviewers: labath, jingham
Subscribers: lldb-commits
Differential Revision: https://reviews.llvm.org/D31368
llvm-svn: 299251
Summary:
Displaying the object pointed by the unique_ptr can cause an infinite
recursion when we have a pointer loop so this change stops that
behavior. Additionally it makes the unique_ptr act more like a class
containing a pointer (what is the underlying truth) instead of some
"magic" class.
Reviewers: labath, jingham
Differential Revision: https://reviews.llvm.org/D31366
llvm-svn: 299249
Summary:
This aims to replace the different decorators we've had on each libc++
test with a single solution. Each libc++ will be assigned to the
"libc++" category and a single central piece of code will decide whether
we are actually able to run libc++ test in the given configuration by
enabling or disabling the category (while giving the user the
opportunity to override this).
I started this effort because I wanted to get libc++ tests running on
android, and none of the existing decorators worked for this use case:
- skipIfGcc - incorrect, we can build libc++ executables on android
with gcc (in fact, after this, we can now do it on linux as well)
- lldbutil.skip_if_library_missing - this checks whether libc++.so is
loaded in the proces, which fails in case of a statically linked
libc++ (this makes copying executables to the remote target easier to
manage).
To make this work I needed to split out the pseudo_barrier code from the
force-included file, as libc++'s atomic does not play well with gcc on
linux, and this made every test fail, even though we need the code only
in the threading tests.
So far, I am only annotating one of the tests with this category. If
this does not break anything, I'll proceed to update the rest.
Reviewers: jingham, zturner, EricWF
Subscribers: srhines, lldb-commits
Differential Revision: https://reviews.llvm.org/D30984
llvm-svn: 299028
This was added to workaround a limitation in LLVM's implementation
of getting the current user's home directory, since it would
only look at the value of $HOME, but we did not want to rely
on that being set so we would also look in the password database.
Adding the ability to look in the password database to LLVM was
a straightforward patch that was submitted in r298513, so since
that is done this test is no longer needed.
llvm-svn: 298519
Only do this when we are debugging an executable, since we
don't have a good way to trace from an ObjectFile back to its
containing executable. Detecting pre-run libs before running
is "best effort" in lldb, but this one is pretty easy.
llvm-svn: 298290
It seems that on darwin we are not able to resolve breakpoints in the
test shared library until the process has started. That seems
unfortunate, but it is not the purpose of this test, so work around that
by starting the process before doing the rest of our checks.
llvm-svn: 297830
Summary:
This fixes the case where a user tries to set a breakpoint on a source
line outside of any function (e.g. because that code is #ifdefed out, or
the compiler did not emit code for the function, etc.) and we would
silently move the breakpoint to the next function.
Now we check whether the line range of the resolved symbol context
function matches the original line number. We reject any breakpoint
locations that appear to move the breakpoint into a new function. This
filtering only happens if we have full debug info available (e.g. in
case of -gline-tables-only compilation, we still set the breakpoint on
the nearest source line).
Reviewers: jingham
Subscribers: lldb-commits
Differential Revision: https://reviews.llvm.org/D30817
llvm-svn: 297817
Summary:
There is nothing we can do with the breakpoint once the associated
target becomes deleted. This will make sure we don't hold on to more
resources than we need in this case. In particular, this fixes the case
TestStepOverBreakpoint on windows, where a lingering SBBreakpoint object
causes us to nor unmap the executable file from memory.
Reviewers: clayborg, jingham
Subscribers: lldb-commits
Differential Revision: https://reviews.llvm.org/D30249
llvm-svn: 296328
Summary:
This also removes magic rename code, which caused the channel to be
called "linux" when built on a linux machine, and "freebsd" when built
on a freebsd one, which seems unnecessary - registering a new channel is
sufficiently simple now that if we wish to log something extremely
os-specific, we can just create a new channel. None of the current
categories seem very specific to one OS or another.
Reviewers: emaste, krytarowski
Subscribers: lldb-commits
Differential Revision: https://reviews.llvm.org/D30250
llvm-svn: 295954
r290874 enabled the s390x test, which caused the rest of the tests to start
misbehaving. This is because this test switches the selected platform and the
change persists.
This fixes it by explicitly resetting the platform in a similar way to the gcore
tests do. Potentially we should consider re-setting the platform globally
between each test run to better protect tests from each other.
llvm-svn: 290890
Summary:
This patch changes and simplifies the way notes are read from Linux Elf cores.
The current implementation copies the bytes from the notes directly over the lldb structure for 64 bit cores and reads field by field for 32 bit cores. Reading the bytes directly only works if the endianess of the core dump and the platform that lldb are running on matches. The case statements for s390x and x86_64 would would only work on big endian systems and little endian systems respectively. That meant that x86_64 generally worked but s390x didn't unless you were on s390x or another big endian platform.
This patch just reads field by field on all platform and updates the field by field version to allow for those fields which are word size instead of fixed size. It should also slightly simplify adding support for a new Linux platform.
This patch also re-enables the s390x test case in TestLinuxCore.py on all non-s390x platforms as it now passes.
Reviewers: uweigand, clayborg
Differential Revision: https://reviews.llvm.org/D27571
llvm-svn: 290874
Fixed by additional completed plans detection, and applying them on breakpoint condition fail.
Thread::GetStopInfo reworked. New test added.
Review https://reviews.llvm.org/D26497
Many thanks to Jim
llvm-svn: 290168
This test passes consistently on linux, so I am removing the overall XFAIL. If it
fails on your configuration, please put a targeted xfail instead (i'll add them
my self if I get any breakage emails).
llvm-svn: 287881
Summary:
This patch changes the way ProcessElfCore.cpp handles signal information.
The patch changes ProcessElfCore.cpp to use the signal from si_signo in SIGINFO notes in preference to the value of cursig in PRSTATUS notes. The value from SIGINFO seems to be more thread specific. The value from PRSTATUS is usually the same for all threads even if only one thread received a signal.
If it cannot find any SIGINFO blocks it reverts to the old behaviour and uses the value from cursig in PRSTATUS. If after that no thread appears to have been stopped it forces the status of the first thread to be SIGSTOP to prevent lldb hanging waiting for any thread from the core file to change state.
The order is:
- If one or more threads have a non-zero si_signo in SIGINFO that will be used.
- If no threads had a SIGINFO block with a non-zero si_signo set all threads signals to the value in cursig in their PRSTATUS notes.
- If no thread has a signal set to a non-zero value set the signal for only the first thread to SIGSTOP.
This resolves two issues. The first was identified in bug 26322, the second became apparent while investigating this problem and looking at the signal values reported for each thread via “thread list”.
Firstly lldb is able to load core dumps generated by gcore where each thread has a SIGINFO note containing a signal number but cursig in the PRSTATUS block for each thread is 0.
Secondly if a SIGINFO note was found the “thread list” command will no longer show the same signal number for all threads. At the moment if a process crashes, for example with SIGILL, all threads will show “stop reason = signal SIGILL”. With this patch only the thread that executed the illegal instruction shows that stop reason. The other threads show “stop reason = signal 0”.
Reviewers: jingham, clayborg
Subscribers: sas, labath, lldb-commits
Differential Revision: https://reviews.llvm.org/D26676
llvm-svn: 287858
Summary:
The floating-point and SSE registers could be present in the elf-core
file in the note NT_FPREGSET for 64 bit ones, and in the note
NT_PRXFPREG for 32 bit ones.
The entire note is a binary blob matching the layout of the x87 save
area that gets generated by the FXSAVE instruction (see Intel developers
manual for more information).
This CL mainly modifies the RegisterRead function in
RegisterContextPOSIXCore_x86_64 for it to return the correct data both
for GPR and FPR/SSE registers, and return false (meaning "this register
is not available") for other registers.
I added a test to TestElfCore.py that tests reading FPR/SSE registers
both from a 32 and 64 bit elf-core file and I have inluded the source
which I used to generate the core files.
I tried to also add support for the AVX registers, because this info could
also be present in the elf-core file (note NT_X86_XSTATE - that is the result of
the newer XSAVE instruction). Parsing the contents from the file is
easy. The problem is that the ymm registers are split into two halves
and they are in different places in the note. For making this work one
would either make a "hacky" approach, because there won't be
any other way with the current state of the register contexts - they
assume that "this register is of size N and at offset M" and
don't have the notion of discontinuos registers.
Reviewers: labath
Subscribers: emaste, lldb-commits
Differential Revision: https://reviews.llvm.org/D26300
llvm-svn: 287506
On Windows, where we use Python 3 for testing, we have to be more explicit about converting between binary and string representations. I believe this should still work for Python 2, but I don't have a convenient way to try it out.
Differential Revision: https://reviews.llvm.org/D26643
llvm-svn: 286909
Summary: This patch reworks all the @skip... lines for sanitizer libraries to be based on whether or not the compiler actually works, rather than whether or not the compiler-rt sources are present in some magically derived directory.
Reviewers: lldb-commits
Subscribers: kubabrecka, tfiala
Differential Revision: https://reviews.llvm.org/D26513
llvm-svn: 286490
Summary:
r284830 added a summary provider for unique_ptr in libstdc++, whose value printed
the value of the pointee. This is a bit unintuitive as it becomes unobvious that
the value actually is a pointer, and we lose the way to actually obtain the
pointer value.
Change that to print the pointer value instead. The pointee value can still be
obtained through the synthetic children.
Reviewers: tberghammer, granata.enrico
Subscribers: lldb-commits
Differential Revision: https://reviews.llvm.org/D26403
llvm-svn: 286355
Summary:
This commit disables the windows-only minidump plugin and enables the new
cross-platform plugin for windows minidump files. Test decorators are adjusted to
reflect that: windows minidump tests can now run on all platforms. The exception
is the tests that create minidump files, as that functionality is not available
yet. I've checked that this works on windows and linux.
Reviewers: amccarth, zturner
Subscribers: dvlahovski, lldb-commits
Differential Revision: https://reviews.llvm.org/D26393
llvm-svn: 286352
I added a "thread-stop-format" to distinguish between the form
that is just the thread info (since the stop printing immediately prints
the frame info) and one with more frame 0 info - which is useful for
"thread list" and the like.
I also added a frame.no-debug boolean to the format entities so you can
print frame information differently between frames with source info and those
without.
This closes https://reviews.llvm.org/D26383.
<rdar://problem/28273697>
llvm-svn: 286288
This renames the functionalities/postmortem/linux-core to elf-core and puts the
"linux" part into the individual names of the core files. Since the tests for
linux and freebsd core files are going to be very similar, having them close
together means they can reuse most of the plumbing.
llvm-svn: 286101
Summary:
This patch contains test for reading YMM Registers. The test basically
contains an inferior that loads the ymm registers with a bit pattern
and the python test executes register read to check if the bit pattern
is correctly written in the registers. This test is repeated twice for
each register with a different pattern for better sanity.
Reviewers: tberghammer, zturner, clayborg
Subscribers: tberghammer, danalbert, srhines
Differential Revision: https://reviews.llvm.org/D26242
llvm-svn: 285885
We really shouldn't be sending events for SB API's, dunno when we started
doing that. We don't do it for other things. But first restore the status quo.
llvm-svn: 285781
We don't have a good story for what happens to watchpoints when you don't
have a process, or if your process exits. Clearing that up will instruct
how to fix this for real.
Also added a test to make sure disable->enable works as well.
This resolves llvm.org/pr30789.
llvm-svn: 285742
Summary:
One of the tests was flaky, because similarly to
https://reviews.llvm.org/D18697 (rL265391) - if there is a process running
which is with the same PID as in the core file, the minidump
core file debugging will fail, because we get some information from the
running process.
The fix is routing the ProcessInfo requests through the Process class
and overriding it in ProcessMinidump to return correct data.
Reviewers: labath
Subscribers: lldb-commits, beanz
Differential Revision: https://reviews.llvm.org/D26193
llvm-svn: 285698
Summary:
This plugin resembles the already existing Windows-only Minidump plugin.
The WinMinidumpPlugin uses the Windows API for parsing Minidumps
while this plugin is cross-platform because it includes a Minidump
parser (which is already commited)
It is able to produce a backtrace, to read the general puprose regiters,
inspect local variables, show image list, do memory reads, etc.
For now the only arches that this supports are x86_32 and x86_64.
This is because I have only written register contexts for those.
Others will come in next CLs.
I copied the WinMinidump tests and adapted them a little bit for them to
work with the new plugin (and they pass)
I will add more tests, aiming for better code coverage.
There is still functionality to be added, see TODOs in code.
Reviewers: labath, zturner
Subscribers: beanz, mgorny, modocache, lldb-commits, amccarth
Differential Revision: https://reviews.llvm.org/D25905
llvm-svn: 285587
Summary:
Convert tests using LLDB headers to use generateSource to put the right include paths in place regardless of whether or not you're building a framework.
This also abstracted generateSource out of TestPublicAPIHeaders.py into lldbtest.py.
Reviewers: tfiala, zturner
Subscribers: lldb-commits
Differential Revision: https://reviews.llvm.org/D25887
llvm-svn: 285542
This reverts commit r285357.
I committed this patch accidentally out of order. Will recommit when the change this depends on is landed.
llvm-svn: 285361
Summary:
Convert tests using LLDB headers to use generateSource to put the right include paths in place regardless of whether or not you're building a framework.
This also abstracted generateSource out of TestPublicAPIHeaders.py into lldbtest.py.
Reviewers: tfiala, zturner
Subscribers: lldb-commits
Differential Revision: https://reviews.llvm.org/D25887
llvm-svn: 285357
Summary:
Check whether the setting the breakpoint failed during instruction emulation. If
it did, the next pc is likely in unmapped memory, and the inferior will crash
anyway after the next instruction. Do not return an error in this case, but just
continue stepping.
Reenabled the crash during step test for android/linux.
Reviewers: labath
Subscribers: aemerson, rengolin, tberghammer, danalbert, srhines, lldb-commits
Differential Revision: https://reviews.llvm.org/D25926
Author: Jason Majors <jmajors@google.com>
llvm-svn: 285187
Otherwise, they tend to generate filename too long errors.
They already contain the same test name in the directory, file, and class names,
so no information is really lost here.
llvm-svn: 284987
* Display the strong/weak count in the summary
* Display the pointed object as a synthetic member
* Create synthetic children for weak/strong count
Differential revision: https://reviews.llvm.org/D25726
llvm-svn: 284828
This tests that lldb handles the situation when a single instruction triggers
multiple watchpoint hits. It currently fails on arm due to what appears to be a
lldb-server bug (pr30758).
llvm-svn: 284819
This reverts commit r284795, as it breaks watchpoint handling on arm (and
presumable all architectures that report watchpoint hits without executing the
tripping instruction).
There seems to be something fundamentally wrong with this patch: it uses
process_sp->AddPreResumeAction to re-enable the watchpoint, but the whole point
of the step-over-watchpoint logic (which AFAIK is the only user of this class) is
to disable the watchpoint *after* we resume to do the single step.
I have no idea how to fix this except by reverting the offending patch.
llvm-svn: 284817
Also, watchpoint commands, like breakpoint commands, need to run in async mode.
This was causing intermittent failures in TestWatchpointCommandPython.py, which is now solid.
llvm-svn: 284795
by grubbing the break list output. If you pass a number of locations into
the run_break_* functions, they will check that this is right for you.
llvm-svn: 284791
This patch fixes ARM/AArch64 watchpoint bug which was taking inferior out of control while stepping over watchpoints.
Also adds a test case that tests above problem.
Differential revision: https://reviews.llvm.org/D25057
llvm-svn: 284706
Summary:
This patch adds support for handling the SIGSEGV signal with 'si_code ==
SEGV_BNDERR', which is thrown when a bound violation is caught by the
Intel(R) MPX technology.
Differential Revision: https://reviews.llvm.org/D25329
llvm-svn: 283474
Summary:
Let the inferior test code determine if CPU and kernel support Intel(R)
MPX and cleanup test script.
Differential Revision: https://reviews.llvm.org/D25328
llvm-svn: 283461
Tests are failing and build is failing on windows and darwin.
Will fix and commit it later
-------------------------------------------------------------
Revert "xfailing minidump tests again ... :("
This reverts commit 97eade002c9e43c1e0d11475a4888083a8965044.
Revert "Fixing new Minidump plugin tests"
This reverts commit 0dd93b3ab39c8288696001dd50b9a093b813b09c.
Revert "Add the new minidump files to the Xcode project."
This reverts commit 2f638a1d046b8a88e61e212220edc40aecd2ce44.
Revert "xfailing tests for Minidump plugin"
This reverts commit 99311c0b22338a83e6a00c4fbddfd3577914c003.
Revert "Adding a new Minidump post-mortem debugging plugin"
This reverts commit b09a7e4dae231663095a84dac4be3da00b03a021.
llvm-svn: 283352
Summary:
This plugin resembles the already existing Windows-only Minidump plugin.
The WinMinidumpPlugin uses the Windows API for parsing Minidumps
while this plugin is cross-platform because it includes a Minidump
parser (which is already commited)
It is able to produce a backtrace, to read the general puprose regiters,
inspect local variables, show image list, do memory reads, etc.
For now the only arch that this supports is x86 64 bit
This is because I have only written a register context for that arch.
Others will come in next CLs.
I copied the WinMinidump tests and adapted them a little bit for them to
work with the new plugin (and they pass)
I will add more tests, aiming for better code coverage.
There is still functionality to be added, see TODOs in code.
Reviewers: labath, zturner
Subscribers: beanz, mgorny, amccarth, lldb-commits, modocache
Differential Revision: https://reviews.llvm.org/D25196
llvm-svn: 283259
Summary:
Use os.getcwd() instead of get_process_working_directory() as prefix for
souce file.
Reviewers: labath
Subscribers: lldb-commits
Differential Revision: https://reviews.llvm.org/D25217
llvm-svn: 283171
The lldbutil.run_break_set_by_file_and_line has already checked that the number of
locations was 1, so don't check it again. And certainly don't check it again by
grubbing in break list output.
Also, we know the Thread's IsStopped state is wrong, and have a test for that, so
don't keep testing it in other files where that isn't the primary thing we're testing.
I removed the xfail for Darwin. If this also passes on other systems, we can remove
the xfails from them as we find that out.
llvm-svn: 282993
Remove the test for thread stopped states from this test.
That isn't set properly now, and its setting doesn't matter till we actually support non-stop debugging, so
we shouldn't have unrelated tests failing from it.
Also changed some code that was trying and failing to grub command line output, and replaced
it by SB API calls.
llvm-svn: 282976
We only use the .o-style debug info here regardless, so having
it run all three debuginfo styles was a waste.
This also strips out the custom build function and uses the
TestBase.build() method.
llvm-svn: 282508
CommandData breakpoint commands didn't know whether they were
Python or Command line commands, so they couldn't serialize &
deserialize themselves properly. Fix that.
I also changed the "breakpoint list" command to note in the output
when the commands are Python commands. Fortunately only one test
was relying on this explicit bit of text output.
llvm-svn: 282432
This change introduces optional marking of the column within a source
line where a thread is stopped. This marking will show up when the
source code for a thread stop is displayed, when the debug info
knows the column information, and if the optional column marking is
enabled.
There are two separate methods for handling the marking of the stop
column:
* via ANSI terminal codes, which are added inline to the source line
display. The default ANSI mark-up is to underline the column.
* via a pure text-based caret that is added in the appropriate column
in a newly-inserted blank line underneath the source line in
question.
There are some new options that control how this all works.
* settings set stop-show-column
This takes one of 4 values:
* ansi-or-caret: use the ANSI terminal code mechanism if LLDB
is running with color enabled; if not, use the caret-based,
pure text method (see the "caret" mode below).
* ansi: only use the ANSI terminal code mechanism to highlight
the stop line. If LLDB is running with color disabled, no
stop column marking will occur.
* caret: only use the pure text caret method, which introduces
a newly-inserted line underneath the current line, where
the only character in the new line is a caret that highlights
the stop column in question.
* none: no stop column marking will be attempted.
* settings set stop-show-column-ansi-prefix
This is a text format that indicates the ANSI formatting
code to insert into the stream immediately preceding the
column where the stop column character will be marked up.
It defaults to ${ansi.underline}; however, it can contain
any valid LLDB format codes, e.g.
${ansi.fg.red}${ansi.bold}${ansi.underline}
* settings set stop-show-column-ansi-suffix
This is the text format that specifies the ANSI terminal
codes to end the markup that was started with the prefix
described above. It defaults to: ${ansi.normal}. This
should be sufficient for the common cases.
Significant leg-work was done by Adrian Prantl. (Thanks, Adrian!)
differential review: https://reviews.llvm.org/D20835
reviewers: clayborg, jingham
llvm-svn: 282105
Serialize breakpoint names & the hardware_requested attributes.
Also added a few missing affordances to SBBreakpoint whose absence
writing the tests pointed out.
<rdar://problem/12611863>
llvm-svn: 282036
It looks like the message-content-retrieval aspect of DarwinLog
support is flaky, not just the regex match against it. Slightly
less frequently than the regex matching, I am seeing the
direct string-match variant of log-message-content matching
also fail.
Tracked by:
llvm.org/pr30299
rdar://28237450
llvm-svn: 281251
*** to conform to clang-format’s LLVM style. This kind of mass change has
*** two obvious implications:
Firstly, merging this particular commit into a downstream fork may be a huge
effort. Alternatively, it may be worth merging all changes up to this commit,
performing the same reformatting operation locally, and then discarding the
merge for this particular commit. The commands used to accomplish this
reformatting were as follows (with current working directory as the root of
the repository):
find . \( -iname "*.c" -or -iname "*.cpp" -or -iname "*.h" -or -iname "*.mm" \) -exec clang-format -i {} +
find . -iname "*.py" -exec autopep8 --in-place --aggressive --aggressive {} + ;
The version of clang-format used was 3.9.0, and autopep8 was 1.2.4.
Secondly, “blame” style tools will generally point to this commit instead of
a meaningful prior commit. There are alternatives available that will attempt
to look through this change and find the appropriate prior commit. YMMV.
llvm-svn: 280751
This reverts commit rL280668 because the register tests fail on i386
Linux.
I investigated a little bit what causes the failure - there are missing
registers when running 'register read -a'.
This is the output I got at the bottom:
"""
...
Memory Protection Extensions:
bnd0 = {0x0000000000000000 0x0000000000000000}
bnd1 = {0x0000000000000000 0x0000000000000000}
bnd2 = {0x0000000000000000 0x0000000000000000}
bnd3 = {0x0000000000000000 0x0000000000000000}
unknown:
2 registers were unavailable.
"""
Also looking at the packets exchanged between the client and server:
"""
...
history[308] tid=0x7338 < 19> send packet: $qRegisterInfo4a#d7
history[309] tid=0x7338 < 130> read packet:
$name:bnd0;bitsize:128;offset:1032;encoding:vector;format:vector-uint64;set:Memory
Protection Extensions;ehframe:101;dwarf:101;#48
history[310] tid=0x7338 < 19> send packet: $qRegisterInfo4b#d8
history[311] tid=0x7338 < 130> read packet:
$name:bnd1;bitsize:128;offset:1048;encoding:vector;format:vector-uint64;set:Memory
Protection Extensions;ehframe:102;dwarf:102;#52
history[312] tid=0x7338 < 19> send packet: $qRegisterInfo4c#d9
history[313] tid=0x7338 < 130> read packet:
$name:bnd2;bitsize:128;offset:1064;encoding:vector;format:vector-uint64;set:Memory
Protection Extensions;ehframe:103;dwarf:103;#53
history[314] tid=0x7338 < 19> send packet: $qRegisterInfo4d#da
history[315] tid=0x7338 < 130> read packet:
$name:bnd3;bitsize:128;offset:1080;encoding:vector;format:vector-uint64;set:Memory
Protection Extensions;ehframe:104;dwarf:104;#54
history[316] tid=0x7338 < 19> send packet: $qRegisterInfo4e#db
history[317] tid=0x7338 < 76> read packet:
$name:bndcfgu;bitsize:64;offset:1096;encoding:vector;format:vector-uint8;#99
history[318] tid=0x7338 < 19> send packet: $qRegisterInfo4f#dc
history[319] tid=0x7338 < 78> read packet:
$name:bndstatus;bitsize:64;offset:1104;encoding:vector;format:vector-uint8;#8e
...
"""
The bndcfgu and bndstatus registers don't have the 'Memory Protections
Extension' set. I looked at the code and it seems that that is set
correctly.
So I'm not sure what's the problem or where does it come from.
Also there is a second failure related to something like this in the
tests:
"""
registerSet.GetName().lower()
"""
For some reason the registerSet.GetName() returns None.
llvm-svn: 280703
When a process stops due to a crash, we get the crashing instruction and the
crashing memory location (if there is one). From the user's perspective it is
often unclear what the reason for the crash is in a symbolic sense.
To address this, I have added new fuctionality to StackFrame to parse the
disassembly and reconstruct the sequence of dereferneces and offsets that were
applied to a known variable (or fuction retrn value) to obtain the invalid
pointer.
This makes use of enhancements in the disassembler, as well as new information
provided by the DWARF expression infrastructure, and is exposed through a
"frame diagnose" command. It is also used to provide symbolic information, when
available, in the event of a crash.
The algorithm is very rudimentary, and it needs a bunch of work, including
- better parsing for assembly, preferably with help from LLVM
- support for non-Apple platforms
- cleanup of the algorithm core, preferably to make it all work in terms of
Operands instead of register/offset pairs
- improvement of the GetExpressioPath() logic to make prettier expression
paths, and
- better handling of vtables.
I welcome all suggestios, improvements, and testcases.
llvm-svn: 280692
Summary:
The Intel(R) Memory Protection Extensions (Intel(R) MPX) associates pointers
to bounds, against which the software can check memory references to
prevent out of bound memory access.
This patch allows accessing the MPX registers:
* bnd0-3: 128-bit registers to hold the bound values,
* bndcfgu, bndstatus: 64-bit configuration registers,
This patch also adds read/write tests for the MPX registers in the register
command tests and adds a new subdirectory for MPX specific tests.
Signed-off-by: Valentina Giusti <valentina.giusti@intel.com>
Reviewers: labath, granata.enrico, lldb-commits, clayborg
Subscribers: lldb-commits
Differential Revision: https://reviews.llvm.org/D24187
llvm-svn: 280668
this is a resubmission of r280476. The problem with the original commit was that it was printing
out all numbers as signed, which was wrong for unsigned numbers with the MSB set. Fix that and
add a unit test covering that case.
llvm-svn: 280480
This reverts commit r280476 as it breaks several tests on i386. I was fixing an 32-bit
breakage, and I did not run the 32-bit test suite before submitting, oops.
llvm-svn: 280478
Summary:
It seems the original intention of the function was printing signed values in decimal format, and
unsigned values in hex (without the leading "0x"). However, signed and unsigned long were
exchanged, which lead to amusing test failures in TestMemoryFind.py.
Instead of just switching the two, I think we should just print everything in decimal here, as
the current behaviour is very confusing (especially when one does not request printing of types).
Nothing seems to depend on this behaviour except and we already have a way for the user to
request the format he wants when printing values for most commands (which presumably does not go
through this function).
I also add a unit tests for the function in question.
Reviewers: clayborg, granata.enrico
Subscribers: lldb-commits
Differential Revision: https://reviews.llvm.org/D24126
llvm-svn: 280476
the test fails for a very prosaic reason: `(const char *)0x1000` returns "4096" on x86_64 and
"1000" (without the "0x") on i386. I haven't tried other 32-bit arches, but I am guessing the
behaviour is the same. XFAIL until someone can get a chance to look at this.
llvm-svn: 280344
Summary:
- copies the new file in the cmake build
- adds an additional import statement
- marks the test as no-debug-info specific, as it seems to be testing a python feature
Reviewers: granata.enrico
Subscribers: lldb-commits
Differential Revision: https://reviews.llvm.org/D24074
llvm-svn: 280261
This class enables one to easily write a synthetic child provider by writing a class that returns pairs of names and primitive Python values - the base class then converts those into LLDB SBValues
Comes with a test case
llvm-svn: 280172
This test was using a condition that would compare a variable against the register that would hold
it. It was failing with clang on arm64 because clang put the variable on the stack.
This is not a supportable way to write tests.
llvm-svn: 279345
Take 2, with missing cmake line fixed. Build tested on
Ubuntu 14.04 with clang-3.6.
See docs/structured_data/StructuredDataPlugins.md for details.
differential review: https://reviews.llvm.org/D22976
reviewers: clayborg, jingham
llvm-svn: 279202
debuggerd is a crash reporting system on android what installs some
signal handler for SEGV to print a backtrace in the log. Its behavior
breaks tests where the test tries to continue after a SEGV so we skip
them as this behavior isn't required on android anyway.
llvm-svn: 278510
It's always hard to remember when to include this file, and
when you do include it it's hard to remember what preprocessor
check it needs to be behind, and then you further have to remember
whether it's windows.h or win32.h which you need to include.
This patch changes the name to PosixApi.h, which is more appropriately
named, and makes it independent of any preprocessor setting.
There's still the issue of people not knowing when to include this,
because there's not a well-defined set of things it exposes other
than "whatever is missing on Windows", but at least this should
make it less painful to fix when problems arise.
This patch depends on LLVM revision r278170.
llvm-svn: 278177
This was a shadowed variable error from the big Expression Parser plugin-ification. I also
added a test case for this.
<rdar://problem/27682376>
llvm-svn: 277662
Summary:
There were places in the code, assuming(hardcoding) offsets
and types that were only valid for the x86_64 elf core file format.
The NT_PRSTATUS and NT_PRPSINFO structures are with the 64 bit layout.
I have reused them and parse i386 files manually, and fill them in the
same struct.
Also added some error handling during parsing that checks if the
available bytes in the buffer are enough to fill the structures.
The i386 core file test case now passes.
For reference on the structures layout, I generally used the
source of binutils (bfd, readelf)
Bug: https://llvm.org/bugs/show_bug.cgi?id=26947
Reviewers: labath
Subscribers: lldb-commits
Differential Revision: https://reviews.llvm.org/D22917
llvm-svn: 277140
This change breaks up the monolithic TestConcurrentEvents.py into a
separate subdir per test method. This allows them to run concurrently,
reduces the chance of a timeout occurring during normal operation, and
allows us to home in on any test methods that may be locking up.
This is step one in the process of squashing timeouts in these test
methods.
The reason for breaking each test method into its own file is to make it
very clear to us if there are a subset of the tests that do in fact lock
up frequently. This will limit how much hunting we need to do to
recreate it.
The reason for putting each file in a separate subdirectory is so that
our concurrent test runner can run multiple test files at the same time.
The unit of serialization in the LLDB test suite is the test directory,
so moving them into separate directories enables the test runner to do
more at the same time.
This change introduces usage of VPATH from gnu make. I use that to
facilitate keeping a single copy of the main.cpp in the parent
concurrent_events directory. Initially I had tried specifying the source
file as ../main.cpp, but our current makefile rules get confused by that
and then also build the output into the parent directory, which defeats
the ability to run each of the test methods concurrently. In the event
that not all systems support VPATH, I can do a bit of surgery on the
Makefile rules and attempt to make it smarter with regards to relative
paths to source files used in the build.
llvm-svn: 276478
review it for consistency, accuracy, and clarity. These changes attempt to
address all of the above while keeping the text relatively terse.
<rdar://problem/24868841>
llvm-svn: 275485
Summary:
The issue arises due to the wrong unwinder used for the first
stack frame, where the default unwinder returns erroneous frame
whereas the fallback would have given the correct frame had it
been used.
The following fix consists of two parts ->
1) The first part changes the unwinding strategy, earlier the
default unwinder was used to get 2 more stack frames and if it
failed a fallback unwinder was used. Now we try to obtain as many
frames (max 10) as we can get from default unwinder and also
fallback unwinder and use the one that gives more number of frames.
2) Normally unwindplans are assosciated with functions and the
row to be used is obtained from the offset (obtained from the low_pc
of the function symbol). Sometimes it may occur that the unwindplan
is assosciated to the complete Elf section in which case the offset
calculation would be wrong as the debugger uses the same offset originally
obtained from the function symbol. Hence this offset is recalculated.
Reviewers: tberghammer, lldb-commits, labath, jasonmolenda
Subscribers: jingham
Differential Revision: http://reviews.llvm.org/D21221
llvm-svn: 274750
Summary:
This patch fills in the implementation of GetMemoryRegions() on the Linux and Mac OS core file implementations of lldb_private::Process (ProcessElfCore::GetMemoryRegions and ProcessMachCore::GetMemoryRegions.) The GetMemoryRegions API was added under: http://reviews.llvm.org/D20565
The patch re-uses the m_core_range_infos list that was recently added to implement GetMemoryRegionInfo in both ProcessElfCore and ProcessMachCore to ensure the returned regions match the regions returned by Process::GetMemoryRegionInfo(addr_t load_addr, MemoryRegionInfo ®ion_info).
Reviewers: clayborg
Subscribers: labath, lldb-commits
Differential Revision: http://reviews.llvm.org/D21751
llvm-svn: 274741
I overlooked the possibility of certain targets translating increment statement into a read and write.
In this case we replace increment statement with an assignment.
llvm-svn: 274215
Target::Install() was assuming the module at index 0 was the executable.
This is often true, but not guaranteed to be the case. The
TestInferiorChanged.py test highlighted this when run against iOS.
After the binary is replaced in the middle of the test, it becomes the
last module in the list. The rest of the Target::Install() logic then
clobbers the executable file by using whatever happens to be the first
module in the target module list.
This change also marks the TestInferiorChanged.py test as a no-debug-info
test.
llvm-svn: 273960
This patch allows LLDB for AArch64 to watch all bytes, words or double words individually on non 8-byte alligned addresses.
This patch also adds tests to verify this functionality.
Differential revision: http://reviews.llvm.org/D21280
llvm-svn: 272916
This enables a couple of tests which have been shown to run reliably on the
linux x86 buildbot. If you see a failure after this commit, feel free to add
the xfail back, but please make it as specific as possible (i.e., try to make
it not cover i386/x86_64 with clang-3.5, clang-3.9 or gcc-4.9).
llvm-svn: 272326
If a lldbinline test's source file changed language, then the Makefile wasn't
updated. This was a problem if the Makefile was checked into the repository.
Now lldbinline.py always regenerates the Makefile and asserts if the
newly-generated version is not the same as the one already there. This ensures
that the repository will never be out of date without a buildbot failing.
http://reviews.llvm.org/D21032
llvm-svn: 272024
For Thread Sanitizer reports, LLDB tries to find a global variable declaration
corresponding to the racy address in order to provide a filename and line
number. This commit changes the lookup of the variable to use the mangled
name for lookup and fall back to the demangled version if unavailable. This
is needed to report locations of races on Swift global variables.
I've also added a test to make sure we look up C++ globals correctly.
rdar://problem/26459401
Differential Revision: http://reviews.llvm.org/D20760
llvm-svn: 271433
This change adds the capability of building test inferiors
with the -gmodules flag to enable module debug info support.
Windows is excluded per @zturner.
Reviewers: granata.enrico, aprantl, zturner, labath
Subscribers: zturner, labath, lldb-commits
Differential Revision: http://reviews.llvm.org/D19998
llvm-svn: 270848
T x;
U y;
doing
x = *((T*)y)
is undefined behavior, even if sizeof(T) == sizeof(U), due to pointer aliasing rules
Fix up a couple of places in LLDB that were doing this, and transform them into a defined and safe memcpy() operation
Also, add a test case to ensure we didn't regress by doing this w.r.t. tagged pointer NSDate instances
llvm-svn: 270793
TestBSDArchives.py and TestWatchLocation.py fail due to unicode error and bug has already been reported for arm and macOSx.
TestConstVariables.py fails because lldb cant figure out frame variable type when used in expr.
llvm-svn: 270780
TestCallUserAnonTypedef.py and TestIRInterpreter.py fail to limitation of JIT expressions in handling hard float ABI targets.
TestBSDArchives.py fails due to python unicode error.
TestBuiltinTrap.py fails due to wrong line information generated by some gcc versions.
llvm-svn: 270745
The error was not getting propagated to the caller, so the higher layers thought the breakpoint
was successfully set & resolved.
I added a testcase, but it assumes 0x0 is not a valid place to set a breakpoint. On most systems
that is true, but if it isn't true of your system, either find another good place and add it to the
test, or x-fail the test.
<rdar://problem/26345962>
llvm-svn: 270014
TestWatchLocation.py fails on arm-linux target due to unicode error in lldb testsuite.
This is a known issue and same test fails on OS X with similar reason.
I have reported a bug and marked this test as xfail for arm-linux targets.
llvm-svn: 269860
Both of above tests fail on arm and bugs have been reported on android already.
Adding arm-linux decorator because android decorator doesnt xfail these test when run on linux.
llvm-svn: 269647
Remove XFAIL from some tests that now pass.
Add XFAIL to some tests that now fail.
Fix a crasher where a null pointer check isn't guarded.
Properly handle all types of errors in SymbolFilePDB.
llvm-svn: 269454
The adding of <atomic> to test_common.h broke 12 tests on Darwin. We work around this by not including <atomic> when building on darwin for libstdc++ tests.
llvm-svn: 269372
Some watchpoint tests fail on aarch64-linux as it lacks support for intalling watchpoints which are not alligned at 8bytes boundary.
Marking them as xfail for now.
llvm-svn: 269187
Test uses x1 in breakpoint expression while objdump shows that x1 is never used in the code and may have random values.
Using x0 make sure that we are using a registe that will have a positive value and breakpoint expression will evaluate true atleast once.
llvm-svn: 269164
Summary:
TestExitDuringStep was very rarely hanging on the buildbots. I can't be sure, but I believe this
was because of the fact that it declared its pseudo_barrier variable as "volatile int", which is
not sufficient to guarantee corectness (also, all other tests used atomic variables for this, and
they were passing reliably AFAIK). Besides switching to an atomic variable in this test as well,
I have also took this opportunity to unify all the copies of the pseudo_barrier code to a single
place to reduce the chance of this happening again.
Reviewers: clayborg
Subscribers: lldb-commits
Differential Revision: http://reviews.llvm.org/D20065
llvm-svn: 269025
This tests both that we set the breakpoint on the right line, and that restricting by file
and/or the function, we get the right breakpoints.
llvm-svn: 269004
Summary:
As these are really testing separate issues, they should be run as separate
tests.
Reviewers: zturner, granata.enrico, clayborg
Subscribers: lldb-commits
Differential Revision: http://reviews.llvm.org/D19690
llvm-svn: 268397
This option evaluates an expression and, if the result is of pointer type, treats it as if it was an array of that many elements and displays such elements
This has a couple subtle points but is mostly as straightforward as it sounds
Add a parray N <expr> alias for this new mode
Also, extend the --object-description mode to do the moral equivalent of the above but display each element in --object-description mode
Add a poarray N <expr> alias for this
llvm-svn: 267372
Summary:
The original breakpoint location test was failing for linux, because the compilers here tend to
merge the full-object and subobject destructors even at -O0 (as a result, we are getting only 2
breakpoint locations, and not 4 as the test expected. The fixup in r266164 substantially weakened
the test, as it now did not check whether both kinds of destructors were being found.
Because of these contraints, I have altered the logic of the test. It sets the
breakpoint by name, and then independently verifies that the breakpoint is set on the correct
demangled symbol name (which is not very meaningful since both kinds of destructors demangle to
the same name) *and* the correct symbol address (which is obtained by looking up the mangled
symbol name).
Reviewers: clayborg
Subscribers: ovyalov, zturner, lldb-commits
Differential Revision: http://reviews.llvm.org/D19052
llvm-svn: 266416
The android dirty stderr problem has uncovered an issue where lldbutil.expect_state_changes was
reading events other than state change events, which resulted in general confusion. Make it more
strict to accept *only* state changes.
llvm-svn: 266327
A number of test cases were failing on big-endian systems simply due to
byte order assumptions in the tests themselves, and no underlying bug
in LLDB.
These two test cases:
tools/lldb-server/lldbgdbserverutils.py
python_api/process/TestProcessAPI.py
actually check for big-endian target byte order, but contain Python errors
in the corresponding code paths.
These test cases:
functionalities/data-formatter/data-formatter-python-synth/TestDataFormatterPythonSynth.py
functionalities/data-formatter/data-formatter-smart-array/TestDataFormatterSmartArray.py
functionalities/data-formatter/synthcapping/TestSyntheticCapping.py
lang/cpp/frame-var-anon-unions/TestFrameVariableAnonymousUnions.py
python_api/sbdata/TestSBData.py (first change)
could be fixed to check for big-endian target byte order and update the
expected result strings accordingly. For the two synthetic tests, I've
also updated the source to make sure the fake_a value is always nonzero
on both big- and little-endian platforms.
These test case:
python_api/sbdata/TestSBData.py (second change)
functionalities/memory/cache/TestMemoryCache.py
simply accessed memory with the wrong size, which wasn't noticed on LE
but fails on BE.
Differential Revision: http://reviews.llvm.org/D18985
llvm-svn: 266315
This fixes several test case failure on s390x caused by the fact that
on this platform, the default "char" type is unsigned.
- In ClangASTContext::GetBuiltinTypeForEncodingAndBitSize we should return
an explicit *signed* char type for encoding eEncodingSint and bit size 8,
instead of the default platform char type (which may be unsigned).
This fix matches existing code in ClangASTContext::GetIntTypeFromBitSize,
and fixes the TestClangASTContext.TestBuiltinTypeForEncodingAndBitSize
unit test case.
- The test/expression_command/char/TestExprsChar.py test case is known to
fail on platforms defaulting to unsigned char (pr23069), and just needs
to be xfailed on s390x like on arm.
- The test/functionalities/watchpoint/watchpoint_on_vectors/main.c test
case defines a vector of "char" and implicitly assumes to be signed.
Use an explicit "signed char" instead.
Differential Revision: http://reviews.llvm.org/D18979
llvm-svn: 266309
This patch adds support for Linux on SystemZ:
- A new ArchSpec value of eCore_s390x_generic
- A new directory Plugins/ABI/SysV-s390x providing an ABI implementation
- Register context support
- Native Linux support including watchpoint support
- ELF core file support
- Misc. support throughout the code base (e.g. breakpoint opcodes)
- Test case updates to support the platform
This should provide complete support for debugging the SystemZ platform.
Not yet supported are optional features like transaction support (zEC12)
or SIMD vector support (z13).
There is no instruction emulation, since our ABI requires that all code
provide correct DWARF CFI at all PC locations in .eh_frame to support
unwinding (i.e. -fasynchronous-unwind-tables is on by default).
The implementation follows existing platforms in a mostly straightforward
manner. A couple of things that are different:
- We do not use PTRACE_PEEKUSER / PTRACE_POKEUSER to access single registers,
since some registers (access register) reside at offsets in the user area
that are multiples of 4, but the PTRACE_PEEKUSER interface only allows
accessing aligned 8-byte blocks in the user area. Instead, we use a s390
specific ptrace interface PTRACE_PEEKUSR_AREA / PTRACE_POKEUSR_AREA that
allows accessing a whole block of the user area in one go, so in effect
allowing to treat parts of the user area as register sets.
- SystemZ hardware does not provide any means to implement read watchpoints,
only write watchpoints. In fact, we can only support a *single* write
watchpoint (but this can span a range of arbitrary size). In LLDB this
means we support only a single watchpoint. I've set all test cases that
require read watchpoints (or multiple watchpoints) to expected failure
on the platform. [ Note that there were two test cases that install
a read/write watchpoint even though they nowhere rely on the "read"
property. I've changed those to simply use plain write watchpoints. ]
Differential Revision: http://reviews.llvm.org/D18978
llvm-svn: 266308
When run with the multiprocess test runner, the getchar() trick doesn't work, so ninja check-lldb would fail on this test, but running the test directly worked fine.
Differential Revision: http://reviews.llvm.org/D19035
llvm-svn: 266145
(lldb) b ~Foo
(lldb) b Foo::~Foo
(lldb) b Bar::Foo::~Foo
Improved out C++ breakpoint locations tests as well to cover this issue.
<rdar://problem/25577252>
llvm-svn: 266139
The result variables aren't useful, and if you have a breakpoint on a
common function you can generate a lot of these. So I changed the
code that checks the condition to set ResultVariableIsInternal in the
EvaluateExpressionOptions that we pass to the execution.
Unfortunately, the check for this variable was done in the wrong place
(the static UserExpression::Evaluate) which is not how breakpoint
conditions execute expressions (UserExpression::Execute). So I moved
the check to UserExpression::Execute (which Evaluate also calls) and made the
overridden method DoExecute.
llvm-svn: 266093
this test was unintentionally XFAILed due to a change in the behavior of the expectedFailure
decorator. Fix that. Also, mark the test as debug-info independent while I'm in there.
llvm-svn: 266072
Previously we had 3 different method to run shell commands on the
target and 4 copy of code waiting until a given file appears on the
target device (used for syncronization). This CL merges these methods
to 1 run_platform_command and 1 wait_for_file_on_target functions
located in some utility classes.
Differential revision: http://reviews.llvm.org/D18789
llvm-svn: 265398
Summary:
There was a bug in linux core file handling, where if there was a running process with the same
process id as the id in the core file, the core file debugging would fail, as we would pull some
pieces of information (ProcessInfo structure) from the running process instead of the core file.
I fix this by routing the ProcessInfo requests through the Process class and overriding it in
ProcessElfCore to return correct data.
A (slightly convoluted) test is included.
Reviewers: clayborg, zturner
Subscribers: lldb-commits
Differential Revision: http://reviews.llvm.org/D18697
llvm-svn: 265391
Teach LLDB that different shells have different characters they are sensitive to, and use that knowledge to do shell-aware escaping
This helps solve a class of problems on OS X where LLDB would try to launch via sh, and run into problems if the command line being passed to the inferior contained such special markers (hint: the shell would error out and we'd fail to launch)
This makes those launch scenarios work transparently via shell expansion
Slightly improve the error message when this kind of failure occurs to at least suggest that the user try going through 'process launch' directly
Fixes rdar://problem/22749408
llvm-svn: 265357
This addresses the same problem as r264846 (the test not expecting the situation when two thread
hit the watchpoint simultaneously), but for a different test.
llvm-svn: 265294
Enrico has a bug on him to make this work across older libcxx list
and newer libcxx list simultaneously. Needed in preparation of
getting the OS X public CI to run the TSAN tests.
tracked by:
rdar://25499635
llvm-svn: 265188
Summary:
the inferior in the test deliberately does not lock a mutex when accessing the watched variable.
The reason for that is unclear as, based on the logs, the original intention of the test was to
check whether watchpoints get propagated to newly created threads, which should work fine even
with a mutex. Furthermore, in the unlikely event (which I have still observed happening from time
to time) that two threads do manage the execute the "critical section" simultaneously, the test
will fail, as it is expecting the watchpoint "hit count" to be 1, but in this case it will be 2.
Given this, I have simply chose to lock the mutex always, so that we have more predictible
behavior. Watchpoints being hit simultaneously is still (and correctly!) tested by
TestConcurrentEvents.
Reviewers: clayborg, jingham
Subscribers: lldb-commits
Differential Revision: http://reviews.llvm.org/D18558
llvm-svn: 264846
1 - If you plan on looking for the "(lldb) " prompt as a regular expression, look for "\(lldb\) " so you don't just find "lldb".
2 - Make sure to not use colors (specify --no-use-colors as an option to lldb when launching it) as our editline will print:
"(lldb) <color junk>(lldb) "
where "<color junk>" is a work around that is used to allow us to colorize our prompts. The bad thing is this will make pexepct code like this not execute as you would expect:
prompt = "\(lldb\) "
self.child.sendline("breakpoint set ...", prompt)
self.child.sendline("breakpoint clear ...", prompt)
The problem is the first "sendline" will create two lldb prompts and will match both the first and second prompts and you output will get off. So be sure to disable colors if you need to.
Fixed a case where "TestCommandScriptImmediateOutput.py" would fail if you have spaces in your directory names. I modified custom_command.py to use shlex to parse arguments and I quoted the file path we sent down to the custom_command.write_file function.
llvm-svn: 264810
Summary:
Fixes SBCommandReturnObject::SetImmediateOutputFile() and
SBCommandReturnObject::SetImmediateOutputFile() for files opened
with "a" or "a+" by resolving inconsistencies between File and
our Python parsing of file objects.
Reviewers: granata.enrico, Eugene.Zelenko, jingham, clayborg
Subscribers: lldb-commits, sas
Differential Revision: http://reviews.llvm.org/D18228
Change by Francis Ricci <fjricci@fb.com>
llvm-svn: 264351
It would be fun to make it provide suggestions (e.g. 'can't find NString, did you mean NSString instead?'), but this worries me a little bit on the account of just how thorough of a type system scan it would have to do
llvm-svn: 264343
This patch adds ThreadSanitizer support into LLDB:
- Adding a new InstrumentationRuntime plugin, ThreadSanitizerRuntime, in the same way ASan is implemented.
- A breakpoint stops in `__tsan_on_report`, then we extract all sorts of information by evaluating an expression. We then populate this into StopReasonExtendedInfo.
- SBThread gets a new API, SBThread::GetStopReasonExtendedBacktraces(), which returns TSan’s backtraces in the form of regular SBThreads. Non-TSan stop reasons return an empty collection.
- Added some test cases.
Reviewed by Greg Clayton.
llvm-svn: 264162
This solves issues such as 'apropos foo' returning valid matches just because syntax examples happen to use 'foo' as a placeholder token
Fixes rdar://9043025
llvm-svn: 264123
We want to do a better job presenting errors that occur when evaluating
expressions. Key to this effort is getting away from a model where all
errors are spat out onto a stream where the client has to take or leave
all of them.
To this end, this patch adds a new class, DiagnosticManager, which
contains errors produced by the compiler or by LLDB as an expression
is created. The DiagnosticManager can dump itself to a log as well as
to a string. Clients will (in the future) be able to filter out the
errors they're interested in by ID or present subsets of these errors
to the user.
This patch is not intended to change the *users* of errors - only to
thread DiagnosticManagers to all the places where streams are used. I
also attempt to standardize our use of errors a bit, removing trailing
newlines and making clients omit 'error:', 'warning:' etc. and instead
pass the Severity flag.
The patch is testsuite-neutral, with modifications to one part of the
MI tests because it relied on "error: error:" being erroneously
printed. This patch fixes the MI variable handling and the testcase.
<rdar://problem/22864976>
llvm-svn: 263859
Summary:
This also adds a basic smoke test for linux core file reading. I'm checking in the core files as
well, so that the tests can run on all platforms. With some tricks I was able to produce
reasonably-sized core files (~40K).
This fixes the first part of pr26322.
Reviewers: zturner
Subscribers: lldb-commits
Differential Revision: http://reviews.llvm.org/D18176
llvm-svn: 263628
This can cause differences in which bit patterns end up meaning YES or NO. In general, however, 0 == NO and 1 == YES.
To keep it simple, LLDB will now show "YES" and "NO" only for 1 and 0 respectively, and format other values as the plain numeric value instead.
Fixes rdar://24809994
llvm-svn: 263604
This partially reverts commit r262218.
The commit added additional checks to a test case. The test case is too big so it's not feasible
to XFAIL it completely. Suggest to implement the checks as a separate test case, which can then
be XFAILed more surgically.
llvm-svn: 262223
Patch by Nitesh Jain.
Summary: The debug version of libc.so is require for backtracing which may not be available on all platforms.
Reviewers: ovyalov, clayborg
Subscribers: zturner, lldb-commits, mohit.bhakkad, sagar, bhushan, jaydeep
Differential: http://reviews.llvm.org/D17131
llvm-svn: 262011
32-bit processes on 64-bit Windows run in a layer called WoW64 (Windows-on-Windows64). If you capture a mini dump of such a process from a 32-bit debugger, you end up with a register context for the 64-bit WoW64 process rather than the 32-bit one you probably care about.
This detects WoW64 by looking to see if there's a module named wow64.dll loaded. For such processes, it then looks in the 64-bit Thread Environment Block (TEB) to locate a copy of the 32-bit CONTEXT record that the plugin needs for the register context.
Added some rudimentary tests. I'd like to improve these later once we figure out how to get the exception information from these mini dumps.
Differential Revision: http://reviews.llvm.org/D17465
llvm-svn: 261808
There are two tests in this file. One which only runs on Windows
and tests that you can set a breakpoint with mismatched case. And
another that only runs on non-Windows and tests that you cannot set
a breakpoint with mismatched case. This latter test is failing on
non Windows platforms for some reason. It could be that the test
is just written incorrectly, as I think the actual functionality
actually works correctly on non-Windows platforms.
llvm-svn: 261800
Paths on Windows are not case-sensitive. Because of this, if a file
is called main.cpp, you should be able to set a breakpoint on it
by using the name Main.cpp. In an ideal world, you could just
tell people to match the case, but in practice this can be a real
problem as it requires you to know whether the person who compiled
the program ran "clang++ main.cpp" or "clang++ Main.cpp", both of
which would work, regardless of what the file was actually called.
This fixes http://llvm.org/pr22667
Patch by Petr Hons
Differential Revision: http://reviews.llvm.org/D17492
Reviewed by: zturner
llvm-svn: 261771
There is a report in the PR from several months ago that it failed
intermittently, but it is passing consistently for me on FreeBSD 10
and 11. We can re-add a decorator if further testing shows it is
still flakey.
llvm.org/pr17214
llvm-svn: 261340
The race condition/use after free involved in setting long prompts
appears to be fixed now (although I do not know which commit fixed it).
llvm.org/pr22611
llvm-svn: 261266
The test fails very rarely. I suspect this is simply because the inferior does not have enough
time to create the file under heavy load.
llvm-svn: 260951
Summary: This is the form on other libc++ tests.
Reviewers: sivachandra
Subscribers: lldb-commits
Differential Revision: http://reviews.llvm.org/D17230
llvm-svn: 260793
On libc++ std::atomic is a fairly simple data type (layout wise, at least), wrapping actual contents in a member variable named "__a_"
All the formatters are doing is "peel away" this intermediate layer and exposing user data as direct children or values of the std::atomic root variable
Fixes rdar://24329405
llvm-svn: 260752
However, they also contain fallback logic that - in cases where LLDB can't recognize the specific subclass - actually does run code in order to inspect those objects.
The argument for this logic was that these data types are critical enough that the risk of getting it wrong is outweighed by the advantage of always providing accurate child information.
Practical experience however shows that "po" - a code running data-inspection command - is quite frequently used, and not considered burdensome by users.
As such, this makes the code-running fallback in the data formatters a risk that carries very little actual reward. Also, unlike the time this code was originally written, we now have accurate class information for Objective-C, and thus we are less likely to improperly identify classes.
This commit removes support for the code-running fallback, and aligns the data formatters for NSArray, NSDictionary and NSSet to the general no-code-running behavior of other data formatters.
While it is possible for us to add support for some subclasses that are now no longer covered by static inspection alone, this is beyond the scope of this commit.
llvm-svn: 260664
clearing the map ended up calling back into the TypeSystemMap to do lookups.
Not a good idea, and in this case it would cause a deadlock.
You would only see this when replacing the target contents after an exec, and only if you
had stopped before the exec, evaluated an expression, then continued
on to the point where you did the exec.
Fixed this by making sure the TypeSystemMap::Clear tears down the TypeSystems in the map before clearing the map.
I also add an expression before exec to the TestExec.py so that we'll catch this
issue if it crops up again in the future.
<rdar://problem/24554920>
llvm-svn: 260624
* Change the `not_in` function to be called `no_match`. This makes
it clear that keyword arguments can be more than just lists.
* Change the name of `_check_list_or_lambda` to
`_match_decorator_property`. Again clarifying that decorator params
are not always lists.
* Always use a regex match when matching strings. This allows automatic
support for regex matching on all decorator properties. Also support
compiled regex values.
* Fix a bug in the compiler check used by _decorateTest. The two
arguments were reversed, the condition was always wrong.
* Change one test that uses skipUnlessArch to use skipIf, to
demonstrate that skipIf can now handle more scenarios.
Differential Revision: http://reviews.llvm.org/D16938
llvm-svn: 260135
expectedFailureWindows is equivalent to using the general
expectedFailureAll decorator with oslist="windows". Additionally,
by moving towards these common decorators we can solve the issue
of having to support decorators that can be called with or without
arguments. Once all decorators are always called with arguments,
and this is enforced by design (because you can't specify the condition
you're decorating for without passing an argument) the implementation
of the decorators can become much simpler
Differential Revision: http://reviews.llvm.org/D16936
llvm-svn: 260134
Obviously, if the original Debugger goes away, those commands are holding on to now stale memory, which has the potential to cause crashes
Fixes rdar://24460882
llvm-svn: 259964
This doesn't attempt to move every decorator. The reason for
this is that it requires touching every single test file to import
decorators.py. I would like to do this in a followup patch, but
in the interest of keeping the patches as bite-sized as possible,
I've only attempted to move the underlying common decorators first.
A few tests call these directly, so those tests are updated as part
of this patch.
llvm-svn: 259807
reason to None when we stop due to a trace, then noticed that
we were on a breakpoint that was not valid for the current thread.
That should actually have set it back to trace.
This was pr26441 (<rdar://problem/24470203>)
llvm-svn: 259684
My eventual goal is to move all of the test decorators to their
own module such as `decorators.py`. But some of the decorators
use existing functions in `lldbtest.py` and conceptually the
functions are probably more appropriately placed in lldbplatformutil.
Moreover, lldbtest.py is a huge file with a ton of random utility
functions scattered around, so this patch also workds toward the
goal of reducing the footprint of this one module to a more
reasonable size.
So this patch moves some of them over to lldbplatformutil with the
eventual goal of moving decorators over to their own module.
Reviewed By: Tamas Berghammer, Pavel Labath
Differential Revision: http://reviews.llvm.org/D16830
llvm-svn: 259680
This decorator was used in only one test, and it's behaviour was quite complicated. It skipped
if:
- test was remote
- platform was *not* android
I am not aware of anyone running tests with this configuration (and even then, I am not aware of
a reason why the test should not pass), but if TestLoadUnload starts breaking for you after this
commit, please disable the test with
@expectedFailureAll(remote=True, oslist=[YOUR_PLATFORM])
llvm-svn: 259642
Previously we were returning a tuple of (bool, skip_reason) from
the tuple function. This makes for some awkward code, especially
since a value of True for the first argument implies that the
second argument is None, and a value of False implies that the
second argument is not None. So it was basically redundant, and
with this patch we simply return the skip reason or None directly.
llvm-svn: 259590
After recent changes, test_thread_state_is_stopped has become equivalent to test_step_in, as the
function exit_during_step_base was not using the "test_thread_state" parameter. As test was
XFAILed on all platforms anyway, and we have other tests for the bug which it (used to) test, I
am simply removing the function.
llvm-svn: 259517
Summary:
r259344 introduced a bug, where we fail to perform a single step, when the instruction we are
stepping onto contains a breakpoint which is not valid for this thread. This fixes the problem
and add a test case.
Reviewers: tberghammer, emaste
Subscribers: abhishek.aggarwal, lldb-commits, emaste
Differential Revision: http://reviews.llvm.org/D16767
llvm-svn: 259488
Summary:
- The patch solves Bug 23478 and Bug 19311. Resolving
Bug 23478 also resolves Bug 23039.
Correct ThreadStopInfo is set for Linux and FreeBSD
platforms.
- Summary:
When a trace event is reported, we need to check
whether the trace event lands at a breakpoint site.
If it lands at a breakpoint site then set the thread's
StopInfo with the reason 'breakpoint'. Else, set the reason
to be 'Trace'.
Change-Id: I0af9765e782fd74bc0cead41548486009f8abb87
Signed-off-by: Abhishek Aggarwal <abhishek.a.aggarwal@intel.com>
Reviewers: jingham, emaste, lldb-commits, clayborg, ovyalov
Subscribers: emaste
Differential Revision: http://reviews.llvm.org/D16720
llvm-svn: 259344
* basestring is not a thing anymore. Must use `six.string_types`.
* Must use from __future__ import print_function in every new test
file.
llvm-svn: 258967
Previously the logic of skipIf and expectedFailure were 99%
the same, but they took different sets of arguments since they
were maintained separately, and had slightly differences in
their behavior. This makes everything consistent, there is now
only one real implementation, and the previous ones are changed
to use the single master implementation.
llvm-svn: 258966
SUMMARY:
Get the load address for the address given by symbol and function.
Earlier, this was done for function only, this patch does it for symbol too.
This patch also adds TestAvoidBreakpointInDelaySlot.py to test this change.
Reviewers: clayborg
Subscribers: labath, zturner, mohit.bhakkad, sagar, jaydeep, lldb-commits
Differential Revision: http://reviews.llvm.org/D16049
llvm-svn: 258919
This is another example of a test that was looking for the thread
at index 0 instead of requesting the thread that was stopped at
the created breakpoint. This assumption isn't true on Windows 10.
llvm-svn: 258764
In Python 3, whitespace inconsistences are errors. This synthetic
provider had mixed tabs and spaces, as well as inconsistent
indentation widths. This led to the file not being imported,
and naturally the test failing. No functional change here, just
whitespace.
llvm-svn: 258751
The Windows 10 loader spawns threads at startup, so
tests which count threads or assume that a given user
thread will be at a specific index are incorrect in
this case. The fix here is to use the standard mechanisms
for getting the stopped thread (which is all we are
really interested in anyway) and correlating them with
the breakpoints that were set, and doing checks against
those things.
This fixes about 6 tests on Windows 10.
llvm-svn: 258586
Starting with Windows 10, the Windows loader is itself multi-threaded,
meaning that the loader spins up a few threads to do process
initialization before it executes main. Windows delivers these
notifications asynchronously and they can come out of order, so
we can't be sure that the first thread we get a notification about
is actually the zero'th thread.
This patch fixes this by requesting the thread stopped at the
breakpoint that was specified, rather than getting thread 0 and
verifying that it is stopped at a breakpoint.
Differential Revision: http://reviews.llvm.org/D16247
llvm-svn: 258432
This patch marks some known failures and puts on expectedFailureLinux decorator to have testsuite xfail them.
Affected tests are:
test/functionalities/watchpoint/step_over_watchpoint.py
test/functionalities/watchpoint/watchpoint_set_command/TestWatchLocationWithWatchSet.py
test/tools/lldb-server/TestGdbRemoteSingleStep.py
test/tools/lldb-server/TestGdbRemote_vCont.py
llvm-svn: 258315
Summary:
The issue arises because LLDB is not
able to read the vdso library correctly.
The fix adds memory allocation callbacks
to allocate sufficient memory in case the
requested offsets don't fit in the memory
buffer allocated for the ELF.
Reviewers: lldb-commits, clayborg, deepak2427, ovyalov, labath, tberghammer
Differential Revision: http://reviews.llvm.org/D16107
llvm-svn: 258122
TestHelloWorld seems to be passing now as far as I can tell. TestExitDuringStep is still hanging.
I have marked the relevant tests as flaky, which should handle the timeouts now as well. I'll be
monitoring the buildbots for fallout.
llvm-svn: 258114
TestConcurrentEvents was marked with a XFAIL decorator at class level, which actually does not
work, and causes the class to be silently skipped everywhere. It seems that making it work at
class level is quite a difficult task, so I will just move it to the individual test methods. I
will follow this up with a commit which makes the decorator blow up in case someone tries to
apply it to a class in the future.
llvm-svn: 257901
Jason Molenda