Core files need to know the size of the PRSTATUS header so that we can grab the register values that follow it. The code that figure out this size was using a hard coded list of architecture cores instead of relying on 32 or 64 bit for most cores.
The fix here fixes core files for 32 bit ARM. Prior to this the PRSTATUS header size was being returned as zero and the register values were being taken from the first bytes of the PRSTATUS struct (signo, etc).
Differential Revision: https://reviews.llvm.org/D58985
llvm-svn: 355526
Summary: This tests a fix in the ASTImpoter.cpp to ensure that we import built-in correctly,
see differential: https://reviews.llvm.org/D58743
Once this change is merged this test should pass and should catch regressions in this feature.
Differential Revision: https://reviews.llvm.org/D58790
llvm-svn: 355525
Pass appropriate -L and -Wl,-rpath flags pointing out to the LLVM
library directory on NetBSD. This is necessary since clang on NetBSD
requires libc++ but it is not installed as part of the system
by default. For the purpose of running buildbot, we want LLDB to use
just-built libc++.
Differential Revision: https://reviews.llvm.org/D58630
llvm-svn: 355502
Summary:
I'm doing this because I plan on implementing `ComputeClangResourceDirectory`
on windows so that `GetClangResourceDir` will work. Additionally, I made
test_paths make sure that the directory member of the returned FileSpec is not
none. This will fail on windows since `ComputeClangResourceDirectory` isn't
implemented yet.
Differential Revision: https://reviews.llvm.org/D58748
llvm-svn: 355463
Add a convenience 'expectedFailureNetBSD' decorator and mark all tests
currently failing on NetBSD with it. Also skip a few tests that hang
the test suite. This should establish a baseline for the test suite
and get us closer to enabling tests on buildbot. This will help us
catch regressions while we still have a lot of work to do to get tests
working.
It seems that there are also some flaky tests. I am going to address
them later on.
Differential Revision: https://reviews.llvm.org/D58527
llvm-svn: 355320
Remove the code forcing -stdlib=libstdc++ on NetBSD in getBuildFlags()
method. NetBSD uses libc++ everywhere else, and using libstdc++ here
causes lang/cpp/dynamic-value to fail to build.
Differential Revision: https://reviews.llvm.org/D58871
llvm-svn: 355273
Traditionally objc had two entry points, objc_msgSend for scalar
return methods, and objc_msgSend_stret for struct return convention
methods. But on arm64 the second was not needed (since arm64 doesn't
use an argument register for the struct return pointer) so it was removed.
The code that dispatches to the objc object checker when it sees some
flavor of objc_msgSend was not aware of this change so was sending the
wrong arguments to the checker.
<rdar://problem/48315890>
Differential Revision: https://reviews.llvm.org/D58699
llvm-svn: 355026
It turns out these tests actually succeed, if one has a clang with
address sanitizer support enabled (i.e., has enabled the compiler-rt
project). I guess none of the linux lldb devs have done that until now.
llvm-svn: 354976
The deserializer was not handling this case. For now we just
accept the absent option, and set it to the breakpoint default.
This will be more important if/when I figure out how to serialize
the options set on breakpont locations.
<rdar://problem/48322664>
llvm-svn: 354702
Fix the load_* using test Makefiles not to link -ldl on NetBSD.
There is no such a library on NetBSD, and dlopen() is available
without a library. Quoting the manpage:
(These functions are not in a library. They are included in every
dynamically linked program automatically.)
To resolve this portably, introduce a new USE_LIBDL option. If it set
to 1, Makefile.rules automatically appends -ldl on platforms needing it.
Differential Revision: https://reviews.llvm.org/D58517
llvm-svn: 354617
Getting failure when building in a directory which is symlinked elsewhere:
Failing Tests (1):
lldb-Suite :: functionalities/breakpoint/comp_dir_symlink/TestCompDirSymLink.py
lldb-Suite :: source-manager/TestSourceManager.py
For TestCompDirSymLink:
------------------------------------------------------------------------------
runCmd: file .../lldb-test-build.noindex/functionalities/breakpoint/comp_dir_symlink/TestCompDirSymLink.test_symlink_paths_set_procselfcwd_dwarf/CompDirSymLink
output: Current executable set to '.../lldb-test-build.noindex/functionalities/breakpoint/comp_dir_symlink/TestCompDirSymLink.test_symlink_paths_set_procselfcwd_dwarf/CompDirSymLink' (x86_64).
runCmd: settings set plugin.symbol-file.dwarf.comp-dir-symlink-paths /proc/self/cwd
output: None
runCmd: breakpoint set -f ".../lldb-test-build.noindex/functionalities/breakpoint/comp_dir_symlink/TestCompDirSymLink.test_symlink_paths_set_procselfcwd_dwarf/relative.cpp" -l 11
output: Breakpoint 1: no locations (pending).
WARNING: Unable to resolve breakpoint to any actual locations.
It is because /proc/self/cwd (used above for plugin.symbol-file.dwarf.comp-dir-symlink-paths) points to an already resolved directory:
(cd /tmp;mkdir real;ln -s real symlink;cd symlink;ls -l /proc/self/cwd)
lrwxrwxrwx 1 jkratoch jkratoch 0 Feb 20 19:55 /proc/self/cwd -> /tmp/real/
------------------------------------------------------------------------------
For TestSourceManager the resolving is done by 'make -C' as found by Pavel Labath.
Differential Revision: https://reviews.llvm.org/D58465
llvm-svn: 354556
encode/decode the data before sending it over the socket. Since (AFAICT)
the vscode protocol (unlike the gdb-remote one) is fully textual, using
the utf8 codec here is appropriate.
llvm-svn: 354308
Summary:
The compilation of the TestDataFormatterLibcxxListLoop.py currently fails with this error:
```
functionalities/data-formatter/data-formatter-stl/libcxx/list/loop/main.cpp:19:24: error: no member named '__value_' in 'std::__1::__list_node_base<int, void *>'
assert(third_elem->__value_ == 3);
~~~~~~~~~~ ^
```
It seems the internal structure of list has changed with the 3.8 release. This patch makes the test compile with the current libc++ and with the previous libc++.
Reviewers: shafik, zturner, labath
Reviewed By: labath
Subscribers: christof, jdoerfert, lldb-commits
Tags: #lldb
Differential Revision: https://reviews.llvm.org/D58273
llvm-svn: 354202
test/lang/cpp/class-template-parameter-pack/TestClassTemplateParameterPack.py
It fails on Mac OS; apparently a VarDecl 'void *&C' is implicitly
declared there, making the class template name C ambiguous.
llvm-svn: 354185
This applies the same fix that was done in r354106 to the lldb-server
test: bitcasting the string to a bytes object before sending it over a
socket. Since the gdb-remote protocol occasionally contains binary data,
and it does not assign any particular encoding to them, this is the
right thing to do here.
llvm-svn: 354114
Summary:
This patch finishes the python3-ification of the lldb-server test suite.
It reverts the partial attempt in r352709 to encode/decode the string
via utf8 before writing to the socket. This wasn't enough because the
gdb-remote protocol can sometimes (but not very often) carry binary
data, and the utf8 codec chokes on that. Instead I add utility functions
to the "seven" module for performing "identity" transformations on the
byte data. This basically drills back the hole in the python type system
that the string/bytes distinction was supposed to plug. That is not
ideal, but was the best solution of the alternatives I could come up
with. The options I considered were:
- make use of the type system to add type safety to the test suite: This
required making a lot of changes to the test suite, since most of the
strings would now become byte objects instead, and it was not even
fully clear to me where to draw the line. One extreme solution would
be to just use byte objects everywhere, as the protocol doesn't
support non-ascii characters anyway. However, this appeared to be:
a) weird, because most of the protocol actually deals with strings,
but we would have to prefix everything with 'b'
b) clunky, because the handling of the bytes objects is sufficiently
different in PY2 and PY3 (e.g. b'a'[0] is a string in PY2, but an
int in PY3).
- using the latin1 codec (which gives an identity transformation for the
first 256 code points of unicode) instead of the custom
bytes_to_string functions. This almost could work, but it was still
slightly different between python 2 and 3, because in PY2 in would
return a unicode object, which would then cause problems when
combined with regular strings if it contained 8-bit chars.
With this in mind, I think the best solution for the time being is to
just coerce everything into the string type as early as possible, and
have things proceed indentically on both python versions. Once we stop
supporting python3, we can revisit the idea of using bytes objects more
prevasively.
Reviewers: davide, zturner, serge-sans-paille
Subscribers: lldb-commits
Differential Revision: https://reviews.llvm.org/D58177
llvm-svn: 354106
Summary:
Instead of doing string chopping on the resulting python file, get swig
to output the version for us. The two things which make slightly
non-trivial are:
- in order to get swig to expand SWIG_VERSION for us, we cannot use
%pythoncode directly, but we have to go through an intermediate macro.
- SWIG_VERSION is a hex number, but it's components are supposed to be
interpreted decimally, so there is a bit of integer magic needed to
get the right number to come out.
I've tested that this approach works both with the latest (3.0.12) and
oldest (1.3.40) supported swig.
Reviewers: zturner, jingham, serge-sans-paille
Subscribers: jdoerfert, lldb-commits
Differential Revision: https://reviews.llvm.org/D58172
llvm-svn: 354104
dotest's version comparision function is just a lexicographical compare
of the version strings. This is obviously wrong. This patch implements
the comparison using distutils.version.LooseVersion as suggested by
Zachary.
Reviewers: zturner, labath, serge-sans-paille
Subscribers: jdoerfert, lldb-commits
Differential Revision: https://reviews.llvm.org/D58219
llvm-svn: 354047
This patch properly extracts the full submodule path as well as its
search paths from DWARF import decls and passes it on to the
ClangModulesDeclVendor.
rdar://problem/47970144
Differential Revision: https://reviews.llvm.org/D58090
llvm-svn: 353961
It looks like I was too hasty to submit the previous patch. It does fix
some tests on python3, but it also breaks one tests with python2.
This happens because the gdb-remote protocol can sometimes (but not very
often) contain binary data, and attempting to parse this as utf8
characters fails.
This reverts commit r353944.
llvm-svn: 353945
An equivalent change was made to RemapPaths, but it needed to be made
here as well. Also added a test for this and made the setup a little
more complex to avoid false successes.
<rdar://problem/47642498>
Differential Revision: https://reviews.llvm.org/D57552
llvm-svn: 353243
Summary:
This patch adds support of expression evaluation in a context of some object.
Consider the following example:
```
struct S {
int a = 11;
int b = 12;
};
int main() {
S s;
int a = 1;
int b = 2;
// We have stopped here
return 0;
}
```
This patch allows to do something like that:
```
lldb.frame.FindVariable("s").EvaluateExpression("a + b")
```
and the result will be `33` (not `3`) because fields `a` and `b` of `s` will be
used (not locals `a` and `b`).
This is achieved by replacing of `this` type and object for the expression. This
has some limitations: an expression can be evaluated only for values located in
the debuggee process memory (they must have an address of `eAddressTypeLoad`
type).
Reviewers: teemperor, clayborg, jingham, zturner, labath, davide, spyffe, serge-sans-paille
Reviewed By: jingham
Subscribers: abidh, lldb-commits, leonid.mashinskiy
Tags: #lldb
Differential Revision: https://reviews.llvm.org/D55318
llvm-svn: 353149
One considers it integer division, the other doesn't.
Move to `//` (floor division) so that this test passes
independently from the version.
llvm-svn: 352706
Summary:
When we are creating a ClassTemplateSpecializationDecl in ParseTypeFromDWARF(...) we are not handling the case where variadic pack is empty in the specialization. This patch handles that case and adds a test to prevent future regressions.
Differential Revision: https://reviews.llvm.org/D57363
llvm-svn: 352677
This fixes most references to the paths:
llvm.org/svn/
llvm.org/git/
llvm.org/viewvc/
github.com/llvm-mirror/
github.com/llvm-project/
reviews.llvm.org/diffusion/
to instead point to https://github.com/llvm/llvm-project.
This is *not* a trivial substitution, because additionally, all the
checkout instructions had to be migrated to instruct users on how to
use the monorepo layout, setting LLVM_ENABLE_PROJECTS instead of
checking out various projects into various subdirectories.
I've attempted to not change any scripts here, only documentation. The
scripts will have to be addressed separately.
Additionally, I've deleted one document which appeared to be outdated
and unneeded:
lldb/docs/building-with-debug-llvm.txt
Differential Revision: https://reviews.llvm.org/D57330
llvm-svn: 352514
When running the test suite on macOS with Python 3 we noticed a
difference in behavior between Python 2 and Python 3 for
seven.get_command_output. The output contained a newline with Python 3,
but not for Python 2. This resulted in an invalid SDK path passed to the
compiler.
Differential revision: https://reviews.llvm.org/D57275
llvm-svn: 352397
This makes it easier to exclude the test n bots that test earlier
DWARF formats, also it feels like this is the better decision for this
testcase anyway.
llvm-svn: 352111
We figured out the issue so the logging is no longer necessary. It turns
out we were using a session format that was not unique for inline tests.
llvm-svn: 351902
The new LLVM header is one line shorter than the old one, which lead to
some test failures. Ideally tests should rely on line numbers for
breakpoints or output, but that's a different discussion. Hopefully this
turns the bots green again.
llvm-svn: 351779
to reflect the new license.
We understand that people may be surprised that we're moving the header
entirely to discuss the new license. We checked this carefully with the
Foundation's lawyer and we believe this is the correct approach.
Essentially, all code in the project is now made available by the LLVM
project under our new license, so you will see that the license headers
include that license only. Some of our contributors have contributed
code under our old license, and accordingly, we have retained a copy of
our old license notice in the top-level files in each project and
repository.
llvm-svn: 351636
We're seeing an odd issue on GreenDragon's lldb-cmake-matrix. Dotest is
unable to move a log file (OSError: [Errno 2] No such file or
directory). The os.rename call is guarded with a check that the source
file and destination directory exist.
This wraps the call in a try-except that prints the source and
destination path to see which component seemingly doesn't exist.
llvm-svn: 351611
This patch changes the behavior when printing C++ function references:
where we previously would get a <could not determine size>, there is
now a <no summary available>. It's not clear to me whether this is a
bug or an omission, but it's one step further than LLDB previously
got.
Differential Revision: https://reviews.llvm.org/D56798
llvm-svn: 351376
Summary:
This patch allows to retrieve an address object for `ValueObject`'s children
retrieved through e.g. `GetChildAtIndex` or `GetChildMemberWithName`. It just
uses the corresponding method of the implementation object `m_impl` to achieve
that.
Reviewers: zturner, JDevlieghere, clayborg, labath, serge-sans-paille
Reviewed By: clayborg
Subscribers: leonid.mashinskiy, lldb-commits
Tags: #lldb
Differential Revision: https://reviews.llvm.org/D56147
llvm-svn: 351065
Summary:
In python 2, strings and bytes are the same, but they're not in
python 3, hence the return of read() needs an explicit conversion.
While I'm around, rename the return of Popen() from `pipe` to
`process`, as that's what Popen returns.
Reviewers: JDevlieghere, friss, zturner, aprantl, serge-sans-paille
Subscribers: lldb-commits
Differential Revision: https://reviews.llvm.org/D56517
llvm-svn: 350788
There is already in use:
lit/lit-lldb-init:
settings set symbols.enable-external-lookup false
packages/Python/lldbsuite/test/lldbtest.py:
self.runCmd('settings set symbols.enable-external-lookup false')
But those are not in effect during MI part of the testsuite. Another problem is
that symbols.enable-external-lookup (read by GetEnableExternalLookup) has been
currently read only by LocateMacOSXFilesUsingDebugSymbols and therefore it had
no effect on Linux.
On Red Hat platforms (Fedoras, RHEL-7) there is DWZ in use and so
MiSyntaxTestCase-test_lldbmi_output_grammar FAILs due to:
AssertionError: error: inconsistent pattern ''^.+?\n'' for state 0x5f
(matched string: warning: (x86_64) /lib64/libstdc++.so.6 unsupported
DW_FORM values: 0x1f20 0x1f21
It is the only testcase with this error. It happens due to:
(lldb) target create "/lib64/libstdc++.so.6"
Current executable set to '/lib64/libstdc++.so.6' (x86_64).
(lldb) b main
warning: (x86_64) /lib64/libstdc++.so.6 unsupported DW_FORM values: 0x1f20 0x1f21
Breakpoint 1: no locations (pending).
WARNING: Unable to resolve breakpoint to any actual locations.
which happens only with gcc-base-debuginfo rpm installed (similarly for other packages).
It should also speed up the testsuite as it no longer needs to read
/usr/lib/debug symbols which have no effect (and should not have any effect) on
the testsuite results.
Differential Revision: https://reviews.llvm.org/D55859
llvm-svn: 350368
TestQueues is failing randomly on green dragon and I suspect it is
because the enqueued threads haven't executed by the time we expect
them. This patch adds file-based synchronization to the queues.
Differential Revision: https://reviews.llvm.org/D56208
llvm-svn: 350247
python 3.7 removes re._pattern_type. Fix the one place where we were
depending on the type of regular expressions to compute the type
dynamically.
llvm-svn: 350093
They both run the same command, and people get used to typing the shortest
string they can, so we should support alias info on shortened strings as well.
<rdar://problem/46859207>
llvm-svn: 349874
These are tests that found actual, but hard to fix, bugs that are
tracked elsewhere. Leaving them red only distracts from new failures
this bot finds.
llvm-svn: 349851
This is a set of tests that were all marked as failing becuse of pr24764. The bug is not fixed (as in more of the tests that were marked this way are failing), but this set is passing. It is possible that some of them are false positives, but there's a large number of unexpectedly passing tests on Windows, so I am doing a bulk un-xfail to get the buildbot to green.
llvm-svn: 349719
This builds on https://reviews.llvm.org/D43884 and https://reviews.llvm.org/D43886 and extends LLDB support of Obj-C exceptions to also look for a "current exception" for a thread in the C++ exception handling runtime metadata (via call to __cxa_current_exception_type). We also construct an actual historical SBThread/ThreadSP that contains frames from the backtrace in the Obj-C exception object.
The high level goal this achieves is that when we're already crashed (because an unhandled exception occurred), we can still access the exception object and retrieve the backtrace from the throw point. In Obj-C, this is particularly useful because a catch+rethrow is very common and in those cases you currently don't have any access to the throw point backtrace.
Differential Revision: https://reviews.llvm.org/D44072
llvm-svn: 349718
This is a set of tests that were all marked as failing becuse of several different bugs. A couple of the bugs are now resolved as fixed since all the tests that were failing associated with the bug are now passing. It is possible that some of them are false positives, but there's a large number of unexpectedly passing tests on Windows, so I am doing a bulk un-xfail to get the buildbot to green.
llvm-svn: 349713
This is a set of tests that were all marked as failing becuse of several different bugs. A couple of the bugs are now resolved as fixed since all the tests that were failing associated with the bug are now passing. It is possible that some of them are false positives, but there's a large number of unexpectedly passing tests on Windows, so I am doing a bulk un-xfail to get the buildbot to green.
llvm-svn: 349711
This is a set of tests that were all marked as failing becuse of pr21765. The bug is not fixed (as in more of the tests that were marked this way are failing), but this set is passing. It is possible that some of them are false positives, but there's a large number of unexpectedly passing tests on Windows, so I am doing a bulk un-xfail to get the buildbot to green.
llvm-svn: 349668
This is a set of tests that were all marked as failing becuse of pr24489. The bug is not fixed (as in more of the tests that were marked this way are failing), but this set is passing. It is possible that some of them are false positives, but there's a large number of unexpectedly passing tests on Windows, so I am doing a bulk un-xfail to get the buildbot to green.
llvm-svn: 349665
Prior to this change we would show the name of the section that a memory region belonged to but not its actual region name. Now we show this,. Added a test that reuses the regions-linux-map.dmp minidump file to test this and verify the correct region names for various memory regions.
Differential Revision: https://reviews.llvm.org/D55854
llvm-svn: 349658
Currently spawnLldbMi accepts both lldb-mi options and executable to debug as
a single parameter. Split them.
As in D55859 we will need to execute one lldb-mi command before loading the
exe. Therefore we can no longer use the exe as lldb-mi command-line parameter
as then there is no way to execute a command before loading exe specified as
lldb-mi command-line parameter.
LocateExecutableSymbolFileDsym should be static, that is also a little
refactorization.
Differential Revision: https://reviews.llvm.org/D55858
llvm-svn: 349607
the "self.assertEqual(thread.GetStopReason(), lldb.eStopReasonSignal)"
was occasionally failing because the stop reason would come out as
"trace" this happened if we issued the interrupt just as the processed
stopped due to single-stepping over the breakpoint (i.e., the it was not
necessary to send any signal).
Fix this by removing the breakpoint before resuming the process. This
ensures the process can run unobstructed.
After this, the test passed 200 consecutive runs successfully for me,
even while the system was under heavy load.
llvm-svn: 349491
This test was disabled in r326756 as a part of "upstreaming debugserver
support for AVX-512 (zmm register set)". This looks like an error
because both register set and remote stubs are different.
In any case, the test passes now.
llvm-svn: 349485
This test is passing now on linux. The same test is claimed to be flaky
on darwin, so it's possible that's true on linux too. If that's the case
we'll have to skip it here too (or fix it).
I mark the test as not-debug-info-dependent as a drive-by.
llvm-svn: 349482
These tests are now passing on linux, at least with top-of-tree clang,
clang-6 and gcc-7.3. It's possible it may still be failing with some
older compilers, but I don't have those around to test.
llvm-svn: 349478
make the executable name more unique.
This test is failing sporadically on some bots. By removing the sleep
synchronisation, I'm hoping to get it to fail more reproducibly so I
can investigate what is going on.
llvm-svn: 349397
While I was out hunting for remaining pexpect-based tests, I came
across these tests that can't possibly work an any modern system, as
they rely on having gdb available in /Developer.
This patch simply removes the test without replacement.
Differential Revision: https://reviews.llvm.org/D55559
llvm-svn: 349194
This re-commits r348592, which was reverted due to a failing test on
macos.
The issue was that I was passing a null pointer for the
"CreateMemoryInstance" callback when registering ObjectFileBreakpad,
which caused crashes when attemping to load modules from memory. The
correct thing to do is to pass a callback which always returns a null
pointer (as breakpad files are never loaded in inferior memory).
It turns out that there is only one test which exercises this code path,
and it's mac-only, so I've create a new test which should run everywhere
(except windows, as one cannot delete an executable which is being run).
Unfortunately, this test still fails on linux for other reasons, but at
least it gives us something to aim for.
The original commit message was:
This patch adds the scaffolding necessary for lldb to recognise symbol
files generated by breakpad. These (textual) files contain just enough
information to be able to produce a backtrace from a crash
dump. This information includes:
- UUID, architecture and name of the module
- line tables
- list of symbols
- unwind information
A minimal breakpad file could look like this:
MODULE Linux x86_64 0000000024B5D199F0F766FFFFFF5DC30 a.out
INFO CODE_ID 00000000B52499D1F0F766FFFFFF5DC3
FILE 0 /tmp/a.c
FUNC 1010 10 0 _start
1010 4 4 0
1014 5 5 0
1019 5 6 0
101e 2 7 0
PUBLIC 1010 0 _start
STACK CFI INIT 1010 10 .cfa: $rsp 8 + .ra: .cfa -8 + ^
STACK CFI 1011 $rbp: .cfa -16 + ^ .cfa: $rsp 16 +
STACK CFI 1014 .cfa: $rbp 16 +
Even though this data would normally be considered "symbol" information,
in the current lldb infrastructure it is assumed every SymbolFile object
is backed by an ObjectFile instance. So, in order to better interoperate
with the rest of the code (particularly symbol vendors).
In this patch I just parse the breakpad header, which is enough to
populate the UUID and architecture fields of the ObjectFile interface.
The rough plan for followup patches is to expose the individual parts of
the breakpad file as ObjectFile "sections", which can then be used by
other parts of the codebase (SymbolFileBreakpad ?) to vend the necessary
information.
Reviewers: clayborg, zturner, lemo, amccarth
Subscribers: mgorny, fedor.sergeev, markmentovai, lldb-commits
Differential Revision: https://reviews.llvm.org/D55214
llvm-svn: 348773
Summary:
r348240 assumes that an expression contains the Objective C option if
Objective C Runtime is found. But on MacOS X it seems that the test application
process always contains Objective C Runtime, so the test fails when it assumes
that the language is C++ only. Skip this part on Darwin.
llvm-svn: 348250
Summary:
This patch adds the check of the language before ignoring names like `id` or
`Class`, which are reserved in Objective C, but are allowed in C++. It is needed
to make it possible to evaluate expressions in a C++ program containing names
like `id` or `Class`.
Reviewers: jingham, zturner, labath, clayborg
Reviewed By: jingham, clayborg
Tags: #lldb
Differential Revision: https://reviews.llvm.org/D54843
llvm-svn: 348240
This patch changes the way the reproducer is initialized. Rather than
making changes at run time we now do everything at initialization time.
To make this happen we had to introduce initializer options and their SB
variant. This allows us to tell the initializer that we're running in
reproducer capture/replay mode.
Because of this change we also had to alter our testing strategy. We
cannot reinitialize LLDB when using the dotest infrastructure. Instead
we use lit and invoke two instances of the driver.
Another consequence is that we can no longer enable capture or replay
through commands. This was bound to go away form the beginning, but I
had something in mind where you could enable/disable specific providers.
However this seems like it adds very little value right now so the
corresponding commands were removed.
Finally this change also means you now have to control this through the
driver, for which I replaced --reproducer with --capture and --replay to
differentiate between the two modes.
Differential revision: https://reviews.llvm.org/D55038
llvm-svn: 348152
Summary:
This patch contains several small fixes, which makes it possible to evaluate
expressions on Windows using information from PDB. The changes are:
- several sanitize checks;
- make IRExecutionUnit::MemoryManager::getSymbolAddress to not return a magic
value on a failure, because callers wait 0 in this case;
- entry point required to be a file address, not RVA, in the ObjectFilePECOFF;
- do not crash on a debuggee second chance exception - it may be an expression
evaluation crash. Also fix detection of "crushed" threads in tests;
- create parameter declarations for functions in AST to make it possible to call
debugee functions from expressions;
- relax name searching rules for variables, functions, namespaces and types. Now
it works just like in the DWARF plugin;
- fix endless recursion in SymbolFilePDB::ParseCompileUnitFunctionForPDBFunc.
Reviewers: zturner, asmith, stella.stamenova
Reviewed By: stella.stamenova, asmith
Tags: #lldb
Differential Revision: https://reviews.llvm.org/D53759
llvm-svn: 348136
The test assumes that HW breakpoints are not implemented by the debug
server. Windows doesn't use these and might actually support HW
breakpoints so these tests are expected fail because they don't raise
the expected error.
llvm-svn: 348010
Summary:
This patch fixes the next situation. On Windows clang-cl makes no stub before
the main function, so the main function is located exactly on module entry
point. May be it is the same on other platforms. So consider the following
sequence:
- set a breakpoint on main and stop there;
- try to evaluate expression, which requires a code execution on the debuggee
side. Such an execution always returns to the module entry, and the plan waits
for it there;
- the plan understands that it is complete now and removes its breakpoint. But
the breakpoint site is still there, because we also have a breakpoint on
entry;
- StopInfo analyzes a situation. It sees that we have stopped on the breakpoint
site, and it sees that the breakpoint site has owners, and no one logical
breakpoint is internal (because the plan is already completed and it have
removed its breakpoint);
- StopInfo thinks that it's a user breakpoint and skips it to avoid recursive
computations;
- the program continues.
So in this situation the program continues without a stop right after
the expression evaluation. To avoid this an additional check that
the plan was completed was added.
Reviewers: jingham, zturner, boris.ulasevich
Reviewed by: jingham
Tags: #lldb
Differential Revision: https://reviews.llvm.org/D53761
llvm-svn: 347974
Earlier this month there was a change in clang that defaulted to using codeview rather than dwarf on Windows. Since all the tests rely on dwarf, we need to explicitly request dwarf when building on Windows.
llvm-svn: 347924
This adds new APIs and a command to deal with exceptions (mostly Obj-C exceptions): SBThread and Thread get GetCurrentException API, which returns an SBValue/ValueObjectSP with the current exception for a thread. "Current" means an exception that is currently being thrown, caught or otherwise processed. In this patch, we only know about the exception when in objc_exception_throw, but subsequent patches will expand this (and add GetCurrentExceptionBacktrace, which will return an SBThread/ThreadSP containing a historical thread backtrace retrieved from the exception object. Currently unimplemented, subsequent patches will implement this).
Extracting the exception from objc_exception_throw is implemented by adding a frame recognizer.
This also add a new sub-command "thread exception", which prints the current exception.
Differential Revision: https://reviews.llvm.org/D43886
llvm-svn: 347813
A couple of new tests have been added that use existing class names. This causes failures on Windows if the tests run at the same time and on any platform it results in the logs being overwritten.
llvm-svn: 347717
Summary: In order to invoke sed on Windows, we need to quote the command correctly. Since we already have commands which do that, move the definitions at the beginning of the file and then re-use them for each command.
Reviewers: aprantl, zturner
Subscribers: teemperor, lldb-commits
Differential Revision: https://reviews.llvm.org/D54709
llvm-svn: 347243
Those tests were using pexpect and being flaky on some of ours bots.
This patch reimplmeents the tests usinf FileCheck, and it also
extends the test coverage to a few more stop-hook options.
llvm-svn: 347109
This saves about 3 redundant gigabytes from the Objective-C test build
directories. Tests that must do unsavory things with the LLDB clang
module cache, already specify a per-test module cache in their .py
test instructions.
<rdar://problem/36002081>
Differential Revision: https://reviews.llvm.org/D54602
llvm-svn: 347057
Just to be safe, up until now each test used its own Clang module
cache directory. Since the compiler within one testsuite doesn't
change it is just as safe to share a clang module directory inside the
LLDB test build directory. This saves us from compiling tens of
gigabytes of redundant Darwin and Foundation .pcm files and also
speeds up running the test suite quite significantly.
rdar://problem/36002081
Differential Revision: https://reviews.llvm.org/D54601
llvm-svn: 347056
Summary:
This commit implements basic DidAttach and DidLaunch for the windows
DynamicLoader plugin which allow us to load shared libraries from the
inferior.
Reviewers: sas, zturner
Reviewed By: zturner
Differential Revision: https://reviews.llvm.org/D54544
llvm-svn: 346994
Summary:
Windows make will search for other shells and choose those over cmd
if available (e.g. C:\cygdrive\bin\sh.exe). This shell has numerous
issues with path handling (/ vs \\ vs \ and C:). So default to using
cmd.exe which is known to work.
Reviewers: zturner, sas, xiaobai
Reviewed By: zturner
Differential Revision: https://reviews.llvm.org/D54510
llvm-svn: 346993
Xcode 10 doesn't ship with an i386 SDK any more. This patch ports the
testcase from an i386/x86_64 -> x86_64/x86_64h universal binary.
rdar://problem/46099343
llvm-svn: 346981
When debugging read-only memory we cannot use software breakpoint. We
already have support for hardware breakpoints and users can specify them
with `-H`. However, there's no option to force LLDB to use hardware
breakpoints internally, for example while stepping.
This patch adds a setting target.require-hardware-breakpoint that forces
LLDB to always use hardware breakpoints. Because hardware breakpoints
are a limited resource and can fail to resolve, this patch also extends
error handling in thread plans, where breakpoints are used for stepping.
Differential revision: https://reviews.llvm.org/D54221
llvm-svn: 346920
An Obj-C array type _NSCallStackArray is used in NSException backtraces. This patch adds a synthetic frontend for _NSCallStackArray, which now correctly returns frame PCs.
Differential Revision: https://reviews.llvm.org/D44081
llvm-svn: 346708
This patch teaches LLDB about more fields on NSException Obj-C objects, specifically we can now retrieve the "name" and "reason" of an NSException. The goal is to eventually be able to have SB API that can provide details about the currently thrown/caught/processed exception.
Differential Revision: https://reviews.llvm.org/D43884
llvm-svn: 346695
This patch removes the comments grouping header includes. They were
added after running IWYU over the LLDB codebase. However they add little
value, are often outdates and burdensome to maintain.
llvm-svn: 346626
qWatchpointSupportInfo packet correctly.
In GDBRemoteCommunicationClient::GetWatchpointSupportInfo,
if the response to qWatchpointSupportInfo does not
include the 'num' field, then we did not get an answer
we understood, mark this target as not supporting that
packet.
In Target.cpp, rename the very confusingly named
CheckIfWatchpointsExhausted to CheckIfWatchpointsSupported,
and check the error status returned by
Process::GetWatchpointSupportInfo. If we cannot determine
what the number of supported watchpoints are, assume that
they will work. We'll handle the failure
later when we try to create/enable the watchpoint if the
Z2 packet isn't supported.
Add a gdb_remote_client test case.
<rdar://problem/42621432>
llvm-svn: 346561
Clang recently improved its DWARF support for C VLA types. The DWARF
now looks like this:
0x00000051: DW_TAG_variable [4]
DW_AT_location( fbreg -32 )
DW_AT_name( "__vla_expr" )
DW_AT_type( {0x000000d3} ( long unsigned int ) )
DW_AT_artificial( true )
...
0x000000da: DW_TAG_array_type [10] *
DW_AT_type( {0x000000cc} ( int ) )
0x000000df: DW_TAG_subrange_type [11]
DW_AT_type( {0x000000e9} ( __ARRAY_SIZE_TYPE__ ) )
DW_AT_count( {0x00000051} )
Without this patch LLDB will naively interpret the DIE offset 0x51 as
the static size of the array, which is clearly wrong. This patch
extends ValueObject::GetNumChildren to query the dynamic properties of
incomplete array types.
See the testcase for an example:
4 int foo(int a) {
5 int vla[a];
6 for (int i = 0; i < a; ++i)
7 vla[i] = i;
8
-> 9 pause(); // break here
10 return vla[a-1];
11 }
(lldb) fr v vla
(int []) vla = ([0] = 0, [1] = 1, [2] = 2, [3] = 3)
(lldb) quit
rdar://problem/21814005
Differential Revision: https://reviews.llvm.org/D53530
llvm-svn: 346165
In January Davide sent an e-mail to the mailing list to suggest removing
unmaintained language plugins such as Go and Java. The plan was to have
some cool down period to allow users to speak up, however after that the
plugins were never actually removed.
This patch removes the Go debugger plugin.
The plugin can be added again in the future if it is mature enough both
in terms of testing and maintenance commitment.
Discussion on the mailing list:
http://lists.llvm.org/pipermail/lldb-dev/2018-January/013171.html
Differential revision: https://reviews.llvm.org/D54057
llvm-svn: 346157
dotest.py started reporting:
Exception: Found multiple tests with the name TestSampleTest.py
After the commit of:
https://reviews.llvm.org/D54056
llvm-svn: 346089
This patch introduces a concept of "frame recognizer" and "recognized frame". This should be an extensible mechanism that retrieves information about special frames based on ABI, arguments or other special properties of that frame, even without source code. A few examples where that could be useful could be 1) objc_exception_throw, where we'd like to get the current exception, 2) terminate_with_reason and extracting the current terminate string, 3) recognizing Objective-C frames and automatically extracting the receiver+selector, or perhaps all arguments (based on selector).
Differential Revision: https://reviews.llvm.org/D44603
llvm-svn: 345693
This patch introduces a concept of "frame recognizer" and "recognized frame". This should be an extensible mechanism that retrieves information about special frames based on ABI, arguments or other special properties of that frame, even without source code. A few examples where that could be useful could be 1) objc_exception_throw, where we'd like to get the current exception, 2) terminate_with_reason and extracting the current terminate string, 3) recognizing Objective-C frames and automatically extracting the receiver+selector, or perhaps all arguments (based on selector).
Differential Revision: https://reviews.llvm.org/D44603
llvm-svn: 345686
This patch introduces a concept of "frame recognizer" and "recognized frame". This should be an extensible mechanism that retrieves information about special frames based on ABI, arguments or other special properties of that frame, even without source code. A few examples where that could be useful could be 1) objc_exception_throw, where we'd like to get the current exception, 2) terminate_with_reason and extracting the current terminate string, 3) recognizing Objective-C frames and automatically extracting the receiver+selector, or perhaps all arguments (based on selector).
Differential Revision: https://reviews.llvm.org/D44603
llvm-svn: 345678
Due to some libcxx changes to inlining, this now also crashes,
so it gets reported as "failure" by the bot. This commit doesn't
really change the status quo, just placates the bots.
llvm-svn: 345668
Add support in ProcessGDBRemote::GetGDBServerRegisterInfo
for recognizing a generic "arm" architecture that will be used if
nothing better is available so that we don't ignore the register
definitions if we didn't already have an architecture set.
Also in ProcessGDBRemote::DoConnectRemote don't set the target
arch unless we have a valid architecture to set it to.
Platform::ConnectProcess will try to get the current target's
architecture, or the default architecture, when creating the
target for the connection to be attempted. If lldb was started
with a target binary, we want to create this target with that
architecture in case the remote gdb stub doesn't supply a
qHostInfo arch.
Add logging to Target::MergeArchitecture.
<rdar://problem/34916465>
llvm-svn: 345106
Summary: These tests fail on Windows because of known limitations (a.k.a. bugs) with the current implementation of GetFrameAtIndex
Reviewers: asmith, vsk
Reviewed By: vsk
Subscribers: abidh, lldb-commits
Differential Revision: https://reviews.llvm.org/D53415
llvm-svn: 344788
Summary: They fail similarly to some of the other breakpoint tests on Windows, so I suspect the cause is the same. I've linked to the same bug.
Reviewers: asmith, zturner, jingham
Subscribers: abidh, lldb-commits
Differential Revision: https://reviews.llvm.org/D53331
llvm-svn: 344744
This reverts commit r344647.
This causes build failures with [-Werror, -Wswitch]. Some cases where the newly
introduced enum value is not handled in particular are in:
lldb/source/Expression/REPL.cpp:350
lldb/source/Interpreter/CommandInterpreter.cpp:1529
(maybe there could be more)
As I don't understand lldb to make sure the likely trivial fixes are
correct and also as they might need additional tests, leaving to the
author to resolve.
llvm-svn: 344722
Before we returned an error that was not exposed in the SB API and no useful
error message. This change returns eExpressionProducedNoResult and an
appropriate error string.
<rdar://problem/44539514>
Differential Revision: https://reviews.llvm.org/D53309
llvm-svn: 344647
tests when targetting a device. Add an include to
safe-to-call-func to work around a modules issue with
a certain combination of header files. Add rules for
Darwin systems to ad-hoc codesign binaries that the
testsuite builds.
llvm-svn: 344635
The TestTailCallFrameSBAPI.py test checks that function names in a
backtrace are equal to an expected value.
Use a relaxed substring check because function dislpay names are
platform-dependent. E.g we see "void sink(void)" on Windows, but "sink()" on
Darwin. This seems like a bug -- just work around it for now.
llvm-svn: 344634
Summary: On non-mac platforms, mac_ver returns an empty string which when converted to LooseVersion has no "version" property. This causes a failure when the decorator executes. Instead, check whether the value returned from mac_ver is an empty string and avoid the LooseVersion comparison.
Reviewers: labath, davide, asmith, shafik, jingham
Reviewed By: jingham
Subscribers: jingham, lldb-commits
Differential Revision: https://reviews.llvm.org/D53208
llvm-svn: 344623
Some tests in test/functionalities/tail_call_frames are failing on
non-Darwin platforms. Use assertEqual to improve logging on failure.
llvm-svn: 344581
Summary:
If the names are not unique, the tests overwrite each other's results and logs. This also causes failures on platforms where the files are locked for writing.
The names of the class/test pairs *have to* always be unique. The easiest way to achieve that is to name each class differently (usually the same as the file name).
Reviewers: jasonmolenda, asmith
Subscribers: clayborg, nemanjai, kbarton, lldb-commits
Differential Revision: https://reviews.llvm.org/D53297
llvm-svn: 344547
Summary: This test is failing on Windows because lldb does not support JIT on Windows.
Reviewers: davide, asmith
Reviewed By: davide
Subscribers: lldb-commits
Differential Revision: https://reviews.llvm.org/D53226
llvm-svn: 344543
If the path was not specified (and it's None), lexists throws an exception rather than returning False. get_filecheck_path now checks whether filecheck is set before calling lexists
llvm-svn: 344410
This allows bots which haven't updated to pass in --filecheck to
dotest.py to run more tests. FileCheck-dependent tests will continue to
fail.
Differential Revision: https://reviews.llvm.org/D53175
llvm-svn: 344401
Summary: This is another string/byte conversion issue between Python 2 and 3. In Python 2, the subprocess communication expects a byte string, but in Python 3, it expects bytes. Since both versions are capable of using strings when universal_newlines is set to True AND filecheck operates on strings, force the use of strings.
Reviewers: zturner, asmith, vsk
Reviewed By: zturner
Subscribers: lldb-commits
Differential Revision: https://reviews.llvm.org/D53166
llvm-svn: 344386
This patch teaches lldb to detect when there are missing frames in a
backtrace due to a sequence of tail calls, and to fill in the backtrace
with artificial tail call frames when this happens. This is only done
when the execution history can be determined from the call graph and
from the return PC addresses of calls on the stack. Ambiguous sequences
of tail calls (e.g anything involving tail calls and recursion) are
detected and ignored.
Depends on D49887.
Differential Revision: https://reviews.llvm.org/D50478
llvm-svn: 343900
Before inspecting the contents of a list, make sure that we've stepped
past the push_back() that inserts the element we're interested in.
llvm-svn: 343899
Summary:
When LLDB successfully parses a command (like "expression" in this case) and determines incomplete input, the user can continue typing on multiple lines (in this case "2+3"). This should provide the correct result.
Note that LLDB reverts input from the additional lines, so they are not present in the output.
Reviewers: vsk, davide, aprantl
Subscribers: lldb-commits
Differential Revision: https://reviews.llvm.org/D52270
llvm-svn: 343860
With buildbot slave under test - I get after rL339929:
http://lab.llvm.org:8014/builders/lldb-x86_64-fedora-28-cmake/builds/243/steps/test1/logs/stdio
File "/home/buildbot/lldbroot/lldb-x86_64-fedora-28-cmake/scripts/../llvm/tools/lldb/test/dotest.py", line 7, in <module>
lldbsuite.test.run_suite()
File "/quad/home/buildbot/lldbroot/lldb-x86_64-fedora-28-cmake/llvm/tools/lldb/packages/Python/lldbsuite/test/dotest.py", line 1177, in run_suite
configuration.results_formatter_object)
File "/quad/home/buildbot/lldbroot/lldb-x86_64-fedora-28-cmake/llvm/tools/lldb/packages/Python/lldbsuite/test/dosep.py", line 1692, in main
dst = core.replace(test_directory, "")[1:]
NameError: global name 'test_directory' is not defined
Patch by Vedant Kumar.
Differential Revision: https://reviews.llvm.org/D51874
llvm-svn: 343726
This is a follow-up to https://reviews.llvm.org/D46362.
When evaluating a complex expression in DWARFExpression::Evaluate,
file addresses must be resolved to load addresses before we can
perform operations such as DW_OP_deref on them.
For this the address goes through three steps
1. Read the file address as stored in the DWARF
2. Link/relocate the file address (when reading from a .dSYM, this is a no-op)
3. Convert the file address to a load address.
D46362 implemented step (3) by resolving the file address using the
Module that the original DWARF came from. In the case of a dSYM that
is correct, but when reading from .o files, we need to look up
relocated/linked addresses, so the right place to look them up is the
current frame's module. This patch fixes that by setting the
expression's Module to point to the linked debugmap object.
A word a bout the unorthodox testcase: The motivating testcase for
this fix is in Swift, but I managed to hand-modify LLVM-IR for a
trivial C program to exhibit the same problem, so we can fix this in
llvm.org.
rdar://problem/44689915
Differential Revision: https://reviews.llvm.org/D52678
llvm-svn: 343612
max number of stack frames to backtrace, make it a setting,
target.process.thread.max-backtrace-depth.
Add a test case for the setting.
<rdar://problem/28759559>
llvm-svn: 343029
Set the "mydir" attribute of an inline test on the test-specific class,
instead of on the base InlineTest class.
This makes it possible to run dotest.py on a directory containing inline
tests. This wasn't really possible prior to this patch, because what
would happen is that one test would just run over and over again, even
though the test infrastructure would claim that different tests were
being run.
Example:
The test infrastructure claimed that all of these different tests were passing,
which couldn't be true --
$ ./bin/lldb-dotest /Users/vsk/src/tailcall/lldb/test/testcases/functionalities/tail_call_frames/ -G dwarf -t 2>&1 | grep PASS
PASS: LLDB (/Users/vsk/src/builds/tailcall-RA/bin/clang-8-x86_64) :: test_dwarf (lldbsuite.test.lldbtest.TestDisambiguateTailCallSeq)
PASS: LLDB (/Users/vsk/src/builds/tailcall-RA/bin/clang-8-x86_64) :: test_dwarf (lldbsuite.test.lldbtest.TestArtificialFrameStepOutMessage)
PASS: LLDB (/Users/vsk/src/builds/tailcall-RA/bin/clang-8-x86_64) :: test_dwarf (lldbsuite.test.lldbtest.TestAmbiguousTailCallSeq1)
PASS: LLDB (/Users/vsk/src/builds/tailcall-RA/bin/clang-8-x86_64) :: test_dwarf (lldbsuite.test.lldbtest.TestDisambiguatePathsToCommonSink)
PASS: LLDB (/Users/vsk/src/builds/tailcall-RA/bin/clang-8-x86_64) :: test_dwarf (lldbsuite.test.lldbtest.TestDisambiguateCallSite)
PASS: LLDB (/Users/vsk/src/builds/tailcall-RA/bin/clang-8-x86_64) :: test_dwarf (lldbsuite.test.lldbtest.TestUnambiguousTailCalls)
PASS: LLDB (/Users/vsk/src/builds/tailcall-RA/bin/clang-8-x86_64) :: test_dwarf (lldbsuite.test.lldbtest.TestAmbiguousTailCallSeq2)
RESULT: PASSED (7 passes, 0 failures, 0 errors, 24 skipped, 0 expected failures, 0 unexpected successes)
... because it wasn't even looking at some of these tests:
$ ./bin/lldb-dotest /Users/vsk/src/tailcall/lldb/test/testcases/functionalities/tail_call_frames/ -G dwarf -t 2>&1 | grep "Change dir"
Change dir to: /Users/vsk/src/tailcall/lldb/packages/Python/lldbsuite/test/functionalities/tail_call_frames/ambiguous_tail_call_seq2
Change dir to: /Users/vsk/src/tailcall/lldb/packages/Python/lldbsuite/test/functionalities/tail_call_frames/ambiguous_tail_call_seq2
Change dir to: /Users/vsk/src/tailcall/lldb/packages/Python/lldbsuite/test/functionalities/tail_call_frames/ambiguous_tail_call_seq2
Change dir to: /Users/vsk/src/tailcall/lldb/packages/Python/lldbsuite/test/functionalities/tail_call_frames/sbapi_support
Change dir to: /Users/vsk/src/tailcall/lldb/packages/Python/lldbsuite/test/functionalities/tail_call_frames/ambiguous_tail_call_seq2
Change dir to: /Users/vsk/src/tailcall/lldb/packages/Python/lldbsuite/test/functionalities/tail_call_frames/thread_step_out_or_return
Change dir to: /Users/vsk/src/tailcall/lldb/packages/Python/lldbsuite/test/functionalities/tail_call_frames/ambiguous_tail_call_seq2
Change dir to: /Users/vsk/src/tailcall/lldb/packages/Python/lldbsuite/test/functionalities/tail_call_frames/ambiguous_tail_call_seq2
Change dir to: /Users/vsk/src/tailcall/lldb/packages/Python/lldbsuite/test/functionalities/tail_call_frames/ambiguous_tail_call_seq2
E.g it was only building one of them:
$ ls lldb-test-build.noindex/functionalities/tail_call_frames/
ambiguous_tail_call_seq2
Differential Revision: https://reviews.llvm.org/D52516
llvm-svn: 343023
On linux, we do not support automatic loading of dependent modules, so
the module list will always contain just one module (until the target is
launched).
llvm-svn: 343016
The 'test_filename' property in TestBase changes over time, so
attempting to find a check file relative to the directory containing
'test_filename' is flaky.
Use the absolute path of the check file as that's always correct (and
simpler). This relies on the test driver changing into the test
directory, which it seems we can safely assume.
As a drive-by, make self.filecheck respect the trace (-t) option.
llvm-svn: 342699
When creating a target, lldb loads all dependent files (i.e. libs in
LC_LOAD_DYLIB for Mach-O). This can be confusing, especially when two
versions of the same library end up in the shared cache. It's possible
to change this behavior, by specifying target create -d <target> these
dependents are not loaded.
This patch changes the default behavior to only load dependent files
only when the target is an executable. When creating a target for a
library, it is now no longer necessary to pass -d. The user can still
override this behavior by specifying the -d option to change this
behavior.
rdar://problem/43721382
Differential revision: https://reviews.llvm.org/D51934
llvm-svn: 342634
Add a "filecheck" method to the LLDB test base. This allows test authors
to pattern match command output using FileCheck, making it possible to
write stricter tests than what `self.expect` allows.
For context (motivation, examples of stricter checking, etc), see the
lldb-dev thread: "Using FileCheck in lldb inline tests".
Differential Revision: https://reviews.llvm.org/D50751
llvm-svn: 342508
Summary:
Completing inside the expression command now uses the new description API
to also provide additional information to the user. For now this information
are the types of variables/fields and the signatures of completed function calls.
Reviewers: #lldb, JDevlieghere
Reviewed By: JDevlieghere
Subscribers: JDevlieghere, lldb-commits
Differential Revision: https://reviews.llvm.org/D52103
llvm-svn: 342385
They're not that common, and falling back is definitely
better than throwing an error instead of the result. If we
feel motivated, we might end up implementing support for these,
but it's unclear whether it's worth the effort/complexity.
Fixes PR38925.
<rdar://problem/44436068>
llvm-svn: 342262
I started from a clean slate to do the checkin, but forgot to svn add the new files.
Do that now.
Also add the one new source file to CMakeLists.txt
llvm-svn: 342190
This change allows you to write a new breakpoint type where the
logic for setting breakpoints is determined by a Python callback
written using the SB API's.
Differential Revision: https://reviews.llvm.org/D51830
llvm-svn: 342185
Summary:
This patch adds a framework for adding descriptions to the command completions we provide.
It also adds descriptions for completed top-level commands so that we can test this code.
Completions are in general supposed to be displayed alongside the completion itself. The descriptions
can be used to provide additional information about the completion to the user. Examples for descriptions
are function signatures when completing function calls in the expression command or the binary name
when providing completion for a symbol.
There is still some boilerplate code from the old completion API left in LLDB (mostly because the respective
APIs are reused for non-completion related purposes, so the CompletionRequest doesn't make sense to be
used), so that's why I still had to change some function signatures. Also, as the old API only passes around a
list of matches, and the descriptions are for these functions just another list, I had to add some code that
essentially just ensures that both lists are always the same side (e.g. all the manual calls to
`descriptions->AddString(X)` below a `matches->AddString(Y)` call).
The initial command descriptions that come with this patch are just reusing the existing
short help that is already added in LLDB.
An example completion with descriptions looks like this:
```
(lldb) pl
Available completions:
platform -- Commands to manage and create platforms.
plugin -- Commands for managing LLDB plugins.
```
Reviewers: #lldb, jingham
Reviewed By: #lldb, jingham
Subscribers: jingham, JDevlieghere, lldb-commits
Differential Revision: https://reviews.llvm.org/D51175
llvm-svn: 342181
This patch improves the support of DWARF5.
Particularly the reporting of source code locations.
Differential revision: https://reviews.llvm.org/D51935
llvm-svn: 342153
After landing r341457, we started seeing a failure on the swift-lldb
bots. The change was correct and pretty straightforward, a DW_OP_constu
was replaced with DW_OP_lit23, the value remaining identical.
0x000000f4: DW_TAG_variable
DW_AT_location (0x00000000
[0x0000000100000a51, 0x0000000100000d47): DW_OP_lit23, DW_OP_stack_value)
DW_AT_name ("number")
However, this broke LLDB.
(Int) number = <extracting data from value failed>
The value was read correctly, but apparently the value's type was different.
When reading a constu it was reading a uint64 (m_type = e_ulonglong) while for
the literal, it got a signed int (m_type = e_sint). This change makes sure we
read the value as an unsigned.
Differential revision: https://reviews.llvm.org/D51730
llvm-svn: 342142
Summary:
The 'memory region' command is at the moment not tested at all by our test suite.
This patch just adds a basic test that at least provides some basic testing.
Reviewers: #lldb, davide
Reviewed By: #lldb, davide
Subscribers: vsk, davide, lldb-commits
Differential Revision: https://reviews.llvm.org/D51930
llvm-svn: 342042
Summary: An address breakpoint of the form "b 0x1000" won't resolve if it's created while the process isn't running. This patch deletes Address::SectionWasDeleted, renames Address::SectionWasDeletedPrivate to SectionWasDeleted (and makes it public), and changes the section check in Breakpoint::ModulesChanged back to its original form
Reviewers: jingham, #lldb
Reviewed By: jingham
Subscribers: davide, lldb-commits
Differential Revision: https://reviews.llvm.org/D51816
llvm-svn: 341849
This patch allows LLDB to print column info in backtraces et al. if
available, which is useful when the backtrace contains a frame like
the following:
f(can_crash(0), can_crash(1));
Differential Revision: https://reviews.llvm.org/D51661
llvm-svn: 341506
These happen in a couple of tests when lldb tries to pretty print a
const char * variable in the inferior which points to garbage. Instead,
we have the python replace the invalid sequences with the unicode
replacement character.
llvm-svn: 341274
This applies the same workaround as r321271 to other tests. The root
problem is that lldb finds an internal symbol with the same name in the
debug info of system libraries, and then fails to disambiguate between
the two.
llvm-svn: 341235
Using a listen queue of length 0 caused a deadlock on my machine in the
gdb-client tests while attempting to establish the loopback socket
connection.
I am not sure if this is down to a different python or kernel version,
but in either case, having queue of length zero sounds like a bad idea,
so I'm bumping that to one (which also fixes the deadlock).
llvm-svn: 341096
Summary:
This patch adds initial code completion support for the `expr` command.
We now have a completion handler in the expression CommandObject that
essentially just attempts to parse the given user expression with Clang with
an attached code completion consumer. We filter and prepare the
code completions provided by Clang and send them back to the completion
API.
The current completion is limited to variables that are in the current scope.
This includes local variables and all types used by local variables. We however
don't do any completion of symbols that are not used in the local scope (or
in some other way already in the ASTContext).
This is partly because there is not yet any code that manually searches for additiona
information in the debug information. Another cause is that for some reason the existing
code for loading these additional symbols when requested by Clang doesn't seem to work.
This will be fixed in a future patch.
Reviewers: jingham, teemperor
Reviewed By: teemperor
Subscribers: labath, aprantl, JDevlieghere, friss, lldb-commits
Differential Revision: https://reviews.llvm.org/D48465
llvm-svn: 341086
This patch extends the SBAPI to allow for setting a breakpoint not
only at a specific line, but also at a specific (minimum) column. When
a column is specified, it will try to find an exact match or the
closest match on the same line that comes after the specified
location.
Differential Revision: https://reviews.llvm.org/D51461
llvm-svn: 341078
Summary:
The syntax highlighting feature so far is mutually exclusive with the lldb feature
that marks the current column in the line by underlining it via an ANSI color code.
Meaning that if you enable one, the other is automatically disabled by LLDB.
This was caused by the fact that both features inserted color codes into the the
source code and were likely to interfere with each other (which would result
in a broken source code printout to the user).
This patch moves the cursor code into the highlighting framework, which provides
the same feature to the user in normal non-C source code. For any source code
that is highlighted by Clang, we now also have cursor marking for the whole token
that is under the current source location. E.g., before we underlined only the '!' in the
expression '1 != 2', but now the whole token '!=' is underlined. The same for function
calls and so on. Below you can see two examples where we before only underlined
the first character of the token, but now underline the whole token.
{F7075400}
{F7075414}
It also simplifies the DisplaySourceLines method in the SourceManager as most of
the code in there was essentially just for getting this column marker to work as
a FormatEntity.
Reviewers: aprantl
Reviewed By: aprantl
Subscribers: lldb-commits
Differential Revision: https://reviews.llvm.org/D51466
llvm-svn: 341003
Summary:
For some bitfield patterns (like the one added by this commit), Clang will
generate non-regular data types like i24 or i48. This patch follows a
pretty naive approach of just bumping the type size to the next power of 2.
DataExtractor know how to deal with weird sizes. The operations on Scalar
do not know how to deal with those types though, so we have to legalize the
size when creating a Scalar.
Reviewers: jingham, clayborg
Subscribers: lldb-commits
Differential Revision: https://reviews.llvm.org/D51245
llvm-svn: 340880
On macOS, some of the <optional> APIs used by the test are available only
starting on macOS 10.14 when using exceptions. Build the test with
-fno-exceptions so that the test builds on older systems too.
rdar://problem/43700544
llvm-svn: 340676
Summary: These are already skipped on Darwin because they cause build bot failures. Both on the build bots as well as in our testing we have seen a number of these tests fail and hang. This change skips the failing/hanging tests on Linux and also fixes one of the test - the test needs the thread library to build.
Reviewers: asmith, clayborg, aprantl
Subscribers: teemperor, lldb-commits
Differential Revision: https://reviews.llvm.org/D51227
llvm-svn: 340658
Summary:
Calling any non-libc builtin function in the expression command currently just causes Clang
to state that the function is not known. The reason for this is that we actually never
initialize the list of builtin functions in the Builtin::Context.
This patch just calls the initializer for the builtins in the preprocessor. Also adds some tests
for the new builtins.
It also gets rid of the extra list of builtins in the ClangExpressionParser, as we can just reuse
the existing list in the Preprocessor for the ASTContext. Having just one list of builtins around
is also closer to the standard Clang behavior.
Reviewers: #lldb, vsk
Reviewed By: vsk
Subscribers: sgraenitz, clayborg, vsk, lldb-commits
Differential Revision: https://reviews.llvm.org/D50481
llvm-svn: 340571
- Added LibcxxFunctionSummaryProvider
- Removed LibcxxFunctionFrontEnd
- Modified data formatter tests to test new summary functionality
Patch by Shafik Yaghmour!
Differential Revision: https://reviews.llvm.org/D50864
llvm-svn: 340543
The single-process test runner is invoked in a number of different
scenarios, including when multiple test dirs are specified or (afaict)
when lit is used to drive the test suite.
Unfortunately the --test-subdir option did not work with the single
process test runner, breaking an important use case (using lit to run
swift-lldb Linux tests):
Failure URL: https://ci.swift.org/job/swift-PR-Linux/6841
We won't be able to run lldb tests within swift PR testing without
filtering down the set of tests.
This change makes --test-subdir work with the single-process runner.
llvm-svn: 339929
This patch adds a new lldb-vscode tool that speaks the Microsoft Visual Studio Code debug adaptor protocol. It has full unit tests that test all packets.
This tool can be easily packaged up into a native extension and used with Visual Studio Code, and it can also be used by Nuclide
Differential Revision: https://reviews.llvm.org/D50365
llvm-svn: 339911
when we have only an in-memory copy of the binary.
Also added a test for the generation of these symbols in the
in-memory and regular cases.
<rdar://problem/43160401>
llvm-svn: 339833
Patch by Shafik Yaghmour!
This reapplies an earlier version after addressing some post-commit feedback.
Differential Revision: https://reviews.llvm.org/D49271
llvm-svn: 339828
Summary:
Instead of just printing the current "False is not True, ..." message when we
fail to run a certain command, this patch also adds the actual command output or
error output that we received to the assertion message.
Reviewers: davide
Reviewed By: davide
Subscribers: lldb-commits
Differential Revision: https://reviews.llvm.org/D50492
llvm-svn: 339351
clang doesn't use line number 0 (to mean artifically generated code) very often, but swift does it
quite often. We were rejecting all by line breakpoints in functions that started at line 0. But that's
a special marker so we can just not do this test in that case.
llvm-svn: 339182
In this patch I add support for ARM and ARM64 break pad files. There are two flavors of ARM: Apple where FP is R7, and non Apple where FP is R11. Added minimal tests that load up ARM64 and the two flavors or ARM core files with a single thread and known register values in each register. Each register is checked for the exact value.
This is a fixed version of: https://reviews.llvm.org/D49750
The changes from D49750 are:
Don't init the m_arch in the Initialize call as a system info isn't required. This keeps the thread list, module list and other tests from failing
Added -Wextended-offsetof to Xcode project so we catch use extended usages of offsetof before submission
Fixed any extended offset of warnings
Differential Revision: https://reviews.llvm.org/D50336
llvm-svn: 339032
This reverts commit r338734 (and subsequent fixups in r338772 and
r338746), because it breaks some minidump unit tests and introduces a
lot of compiler warnings.
llvm-svn: 338828
Summary:
1) Several tests that are flakey on windows fail the run even if they are marked as expected to be flakey. This is because they fail frequently enough that even a retry won't help
2) Skip several tests on Windows that will occasionally hang rather than failing or exiting. This is causing the entire test suite to hang
Reviewers: asmith, labath, zturner
Reviewed By: zturner
Differential Revision: https://reviews.llvm.org/D50198
llvm-svn: 338769
In this patch I add support for ARM and ARM64 break pad files. There are two flavors of ARM: Apple where FP is R7, and non Apple where FP is R11. Added minimal tests that load up ARM64 and the two flavors or ARM core files with a single thread and known register values in each register. Each register is checked for the exact value.
Differential Revision: https://reviews.llvm.org/D49750
llvm-svn: 338734
Summary:
This patch adds syntax highlighting support to LLDB. When enabled (and lldb is allowed
to use colors), printed source code is annotated with the ANSI color escape sequences.
So far we have only one highlighter which is based on Clang and is responsible for all
languages that are supported by Clang. It essentially just runs the raw lexer over the input
and then surrounds the specific tokens with the configured escape sequences.
Reviewers: zturner, davide
Reviewed By: davide
Subscribers: labath, teemperor, llvm-commits, mgorny, lldb-commits
Tags: #lldb
Differential Revision: https://reviews.llvm.org/D49334
llvm-svn: 338662
As Jim pointed out, we don't need to manually create a target
here because we already create a target implicitly in the very
next line (which means we just created a target and don't use it).
This patch just removes the line that creates the first unused target.
llvm-svn: 338657
Summary: Otherwise this assertion message is not very useful to whoever is reading the log.
Subscribers: lldb-commits
Differential Revision: https://reviews.llvm.org/D49947
llvm-svn: 338179
Summary: Stopgap patch to at least stop all the crashes I get from this code.
Subscribers: lldb-commits
Differential Revision: https://reviews.llvm.org/D49949
llvm-svn: 338177
Summary:
The test suite has often unnecessary trailing whitespace, and sometimes
unnecessary trailing lines or a missing final new line. This patch just strips
trailing whitespace/lines and adds missing newlines at the end.
Subscribers: ki.stfu, JDevlieghere, christof, lldb-commits
Differential Revision: https://reviews.llvm.org/D49943
llvm-svn: 338171
This broke a linux bot which doesn't support -std=c++17. The solution
is to add a decorator to skip these tests on machines with older compilers.
llvm-svn: 338162
This should have all the correct files now.
<rdar://problem/41471112>
Patch by Shafik Yaghmour.
Differential Revision: https://reviews.llvm.org/D49271
llvm-svn: 338156
Summary:
So far lldb is printing this when it finds an ambiguous command:
```
(lldb) g
Ambiguous command 'g'. Possible matches:
gdb-remote
gui
gdb-remote
gui
```
The duplicates come from the fact that we call the same query twice with the same parameters
and add it to the same list. This patch just removes the second query call to `GetCommandObject`.
As `GetCommandObject` is const and the name parameter is also not modified, this shouldn't break
anything else. I didn't merge the remaining if statement into the else as I think otherwise the
`if obj==nullptr do X else Y` pattern in there becomes hard to recognize.
Reviewers: davide
Reviewed By: davide
Subscribers: lldb-commits
Differential Revision: https://reviews.llvm.org/D49866
llvm-svn: 338043
Summary:
We always print two error messages when we hit an unknown command. As the function
`CommandInterpreter::HandleCommand` that prints the second error message unconditionally called the `CommandInterpreter::ResolveCommandImpl` before (which prints the first error message), we can just remove
that second error message.
Fixes https://bugs.llvm.org/show_bug.cgi?id=38312
Reviewers: labath
Reviewed By: labath
Subscribers: labath, lldb-commits
Differential Revision: https://reviews.llvm.org/D49831
llvm-svn: 338040
clang recently started diagnosing "exception specification in
declaration does not match previous declaration" errors. Unfortunately
old libc++ versions had a bug, where they violated this rule, which
means that tests using this library version now fail due to build
errors.
Since it was easy to work around the bug by compiling this test with
-fno-exceptions, I do that here. If supporting old libc++ versions
becomes a burden, we'll have to revisit this.
llvm-svn: 337173
The synthetic child providers for these classes had a type expression that matched
pointers & references to the type, but the Front End only worked on the actual object.
I fixed this by adding a way for the Synthetic Child FrontEnd provider to request dereference,
and then had these formatters use that mode.
<rdar://problem/40849836>
Differential Revision: https://reviews.llvm.org/D49279
llvm-svn: 337035
TestAttachDenied tries to attach to a process that is ptracing itself and
verifies that we error out. Starting with macOS Mojave, processes need
an entitlement to be able to ptrace. This commit adds the entitlement for
the test binary when building on Darwin.
llvm-svn: 337029
Summary: It looks like the test file was copied from TestCPPStaticMethods.py because they have the same name. This means that the two tests will try to write to the same output files and will either overwrite each other's output or occasionally cause failures because they can't both access the same file.
Reviewers: asmith, zturner
Reviewed By: zturner
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D49261
llvm-svn: 336960
Scalar::MakeUnsigned was implemented incorrectly so it didn't
really change the sign of the type (leaving signed types signed).
This showed up as a misevaluation when IR-interpreting urem but
it's likely to arise in other contexts.
This commit fixes the definition, and adds a test to make
sure this won't regress in future (hopefully).
Fixes rdar://problem/42038760 and LLVM PR38076
Differential Revision: https://reviews.llvm.org/D49155
llvm-svn: 336872
Summary:
This patch adds the possibility to specify an exit code when calling quit.
We accept any int, even though it depends on the user what happens if the int is
out of the range of what the operating system supports as exit codes.
Fixes rdar://problem/38452312
Reviewers: davide, jingham, clayborg
Reviewed By: jingham
Subscribers: clayborg, jingham, lldb-commits
Differential Revision: https://reviews.llvm.org/D48659
llvm-svn: 336824
On systems where it's not supported.
As far as I understand Linux is the only systems which now ships
with libstdcxx (maybe NetBSD?, but I'm not entirely sure of the
state of lldb on the platform).
We could make this more fine grained looking for the header as
we do for libcxx. This is a little tricky as there's no such
thing as /usr/include/c++/v1, but libstdcxx encodes the version
number in the path (i.e. /usr/include/c++/5.4). I guess we might
match a regex, but it seems fragile to me.
Differential Revision: https://reviews.llvm.org/D49110
llvm-svn: 336724
Summary:
If we have an xvalue here, we will always hit the `err_typecheck_invalid_lvalue_addrof` error
in 'Sema::CheckAddressOfOperand' when trying to take the address of the result. This patch
uses the fallback code path where we store the result in a local variable instead when we hit
this case.
Fixes rdar://problem/40613277
Reviewers: jingham, vsk
Reviewed By: vsk
Subscribers: vsk, friss, lldb-commits
Differential Revision: https://reviews.llvm.org/D48303
llvm-svn: 336582
This generalizes a bunch of target-specific tests. MacOS has no
libstdcxx anymore, and neither does FreeBSD (or Windows).
<rdar://problem/41896105>
llvm-svn: 336463
This test was trying to stop at a variety of std::vector calls. It looks like the test
was failing because various inlined std functions left no line table entries for the line that
invoked the inlined function. The author worked around that by undefining _LIBCPP_INLINE_VISIBILITY.
That's an internal libcxx macro, we really shouldn't be playing around with it. Better to just force
ourselves to stop where we want using some other non-inlineable statement. printf seems a good candidate...
<rdar://problem/41867390>
llvm-svn: 336397
Summary:
This change fixes one issue with `lldb.command`, and also reduces the implementation.
The fix: a command function's docstring was not shown when running `help <command_name>`. This is because the docstring attached the source function is not propagated to the decorated function (`f.__call__`). By returning the original function, the docstring will be properly displayed by `help`.
Also with this change, the command name is assumed to be the function's name, but can still be explicitly defined as previously.
Additionally, the implementation was updated to:
* Remove inner class
* Remove use of `inspect` module
* Remove `*args` and `**kwargs`
Reviewers: clayborg
Reviewed By: clayborg
Subscribers: keith, xiaobai, lldb-commits
Differential Revision: https://reviews.llvm.org/D48658
llvm-svn: 336287
Summary: The new API allows to find a list of compile units related to target/module.
Reviewers: aprantl, clayborg
Reviewed By: aprantl
Subscribers: jingham, lldb-commits
Differential Revision: https://reviews.llvm.org/D48801
llvm-svn: 336200
Frederic Riss