The Overflow version of XO-Form instruction uses the SO, OV and
OV32 special registers.
This changes modifies existing multiclasses and instruction
definitions to allow for the use of the XER register to record
the various types if overflow from possible add, subtract and
multiply instructions. It then modifies the existing instructions
as to use these multiclasses as needed.
Patch By: Kamau Bridgeman
Differential Revision: https://reviews.llvm.org/D66902
We lower known CR bit spills (CRSET/CRUNSET) to load and spill the known value
but forgot to remove the redundant spills.
e.g., This sequence was used to spill a CRUNSET:
crclr 4*cr5+lt
mfocrf r3,4
rlwinm r3,r3,20,0,0
stw r3,132(r1)
Custom lowering of known CR bit spills lower it to:
crxor 4*cr5+lt, 4*cr5+lt, 4*cr5+lt
li r3,0
stw r3,132(r1)
crxor is redundant if there is no use of 4*cr5+lt so we should remove it
Differential revision: https://reviews.llvm.org/D67722
Summary:
We are using symbols to represent label and csect interchangeably before, and that could be a problem.
There are cases we would need to add storage mapping class to the symbol if that symbol is actually the name of a csect, but it's hard for us to figure out whether that symbol is a label or csect.
This patch intend to do the following:
1. Construct a QualName (A name include the storage mapping class)
MCSymbolXCOFF for every MCSectionXCOFF.
2. Keep a pointer to that QualName inside of MCSectionXCOFF.
3. Use that QualName whenever we need a symbol refers to that
MCSectionXCOFF.
4. Adapt the snowball effect from the above changes in
XCOFFObjectWriter.cpp.
Reviewers: xingxue, DiggerLin, sfertile, daltenty, hubert.reinterpretcast
Reviewed By: DiggerLin, daltenty
Subscribers: wuzish, nemanjai, mgorny, hiraditya, kbarton, jsji, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D69633
This option allows the user to specify the use of absolute jumptables instead
of relative which is the default on most PPC subtargets.
Patch by Kamauu Bridgeman
Differential revision: https://reviews.llvm.org/D69108
The 'RM' flag model the "Rounding Mode" and it has nothing to do with the load/store instructions.
Differential Revision: https://reviews.llvm.org/D69551
This patch (second of two patches) lowers the generic PowerPC vector
entries to PowerPC subtarget-specific entries.
For instance, the PowerPC generic entry 'cbrtd2_massv' is lowered to
'cbrtd2_P9' or Power9 subtarget.
The first patch enables the vectorizer to recognize the IBM MASS vector
library routines. This patch specifically adds support for recognizing
the '-vector-library=MASSV' option, and defines mappings from IEEE
standard scalar math functions to generic PowerPC MASS vector
counterparts.
For instance, the generic PowerPC MASS vector entry for double-precision
'cbrt' function is '__cbrtd2_massv'
The overall support for MASS vector library is presented as such in two
patches for ease of review.
Patch by pjeeva01 (Jeeva P.)
Differential Revision: https://reviews.llvm.org/D59883
This adds a flag to LLVM and clang to always generate a .debug_frame
section, even if other debug information is not being generated. In
situations where .eh_frame would normally be emitted, both .debug_frame
and .eh_frame will be used.
Differential Revision: https://reviews.llvm.org/D67216
If the instruction have match pattern, llvm-tblgen will infer the sideeffect bit from the match pattern and it works well.
If not, the tblgen will set it as true that hurt the scheduling.
PowerPC has some instructions that didn't specify the match pattern(i.e. LXSD etc), which is manually selected post-ra according
to the register pressure. We need to clear the sideeffect flag for these instructions.
Differential Revision: https://reviews.llvm.org/D69232
VSX provides floating point minimum and maximum instructions that conform
to IEEE semantics. This legalizes the respective nodes and emits VSX code
for them. Furthermore, on Power9 cores we have xsmaxcdp and xsmincdp
instructions that conform to language semantics for the conditional operator
even in the presence of NaNs.
Differential revision: https://reviews.llvm.org/D62993
These two intrinsics are lowered to calls so should prevent the formation of
CTR loops. In a subsequent patch, we will handle all currently known intrinsics
and prevent the formation of HW loops if any unknown intrinsics are encountered.
Differential revision: https://reviews.llvm.org/D68841
This patch reworks the AIX call lowering to use CCState. Some defensive errors
are added in this patch to protect from emitting bad code for calling convention
logic that has not been implemented by design. The use of CCState follows the
precedent of other targets and enables the reuse of calling convention logic in
LowerFormalArguments, which will be rewritten to also use CCState in a late
patch.
Patch by Chris Bowler.
Differential Revision: https://reviews.llvm.org/D69101
MipsMCAsmInfo was using '$' prefix for Mips32 and '.L' for Mips64
regardless of -target-abi option. By passing MCTargetOptions to MCAsmInfo
we can find out Mips ABI and pick appropriate prefix.
Tags: #llvm, #clang, #lldb
Differential Revision: https://reviews.llvm.org/D66795
This re-commits r375152 which was pulled in r375233 because it broke
the EXPENSIVE_CHECKS bot on Windows.
The reason for the failure was a bug in the pass that the commit turned
on by default. This patch fixes that bug and turns the pass back on.
This patch has been verified on the buildbot that originally failed
thanks to Simon Pilgrim.
Differential revision: https://reviews.llvm.org/D52431
llvm-svn: 375497
MachineInstr.h included AliasAnalysis.h, which includes a world of IR
constructs mostly unneeded in CodeGen. Prune it. Same for
DebugInfoMetadata.h.
Noticed with -ftime-trace.
llvm-svn: 375311
Quite a while ago, we implemented a pass that will reduce the number of
CR-logical operations we emit. It does so by converting a CR-logical operation
into a branch. We have kept this off by default because it seemed to cause a
significant regression with one benchmark.
However, that regression turned out to be due to a completely unrelated
reason - AADB introducing a self-copy that is a priority-setting nop and it was
just exacerbated by this pass.
Now that we understand the reason for the only degradation, we can turn this
pass on by default. We have long since fixed the cause for the degradation.
Differential revision: https://reviews.llvm.org/D52431
llvm-svn: 375152
This patch provides support for peudo ops including ADDIStocHA8, ADDIStocHA, LWZtocL,
LDtoc, LDtocL for AIX, lowering them from MIR to assembly.
Differential Revision: https://reviews.llvm.org/D68341
llvm-svn: 375113
Summary:
This is patch is part of a series to introduce an Alignment type.
See this thread for context: http://lists.llvm.org/pipermail/llvm-dev/2019-July/133851.html
See this patch for the introduction of the type: https://reviews.llvm.org/D64790
Reviewers: courbet
Subscribers: jholewinski, arsenm, dschuff, jyknight, dylanmckay, sdardis, nemanjai, jvesely, nhaehnle, sbc100, jgravelle-google, hiraditya, aheejin, kbarton, fedor.sergeev, asb, rbar, johnrusso, simoncook, apazos, sabuasal, niosHD, jrtc27, MaskRay, zzheng, edward-jones, atanasyan, rogfer01, MartinMosbeck, brucehoult, the_o, PkmX, jocewei, jsji, Jim, lenary, s.egerton, pzheng, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D68993
llvm-svn: 375084
The commit of rL374420 had various formatting issues, including lines
that exceed 80 columns. This patch applies `git clang-format` on the
changes from commit 13bd3ef40d.
It further adjusts a comment to clarify the domain of inputs upon which
a newly added function is meant to operate. The adjustment to the
comment was suggested in a post-commit comment on D68721 and discussed
off-list with @sfertile.
llvm-svn: 374635
In loop-vectorize, interleave count and vector factor depend on target register number. Currently, it does not
estimate different register pressure for different register class separately(especially for scalar type,
float type should not be on the same position with int type), so it's not accurate. Specifically,
it causes too many times interleaving/unrolling, result in too many register spills in loop body and hurting performance.
So we need classify the register classes in IR level, and importantly these are abstract register classes,
and are not the target register class of backend provided in td file. It's used to establish the mapping between
the types of IR values and the number of simultaneous live ranges to which we'd like to limit for some set of those types.
For example, POWER target, register num is special when VSX is enabled. When VSX is enabled, the number of int scalar register is 32(GPR),
float is 64(VSR), but for int and float vector register both are 64(VSR). So there should be 2 kinds of register class when vsx is enabled,
and 3 kinds of register class when VSX is NOT enabled.
It runs on POWER target, it makes big(+~30%) performance improvement in one specific bmk(503.bwaves_r) of spec2017 and no other obvious degressions.
Differential revision: https://reviews.llvm.org/D67148
llvm-svn: 374634
Summary:
The AIX system assembler does not understand .zero, so we should prefer
emitting .space.
Subscribers: nemanjai, hiraditya, kbarton, MaskRay, jsji, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D68815
llvm-svn: 374564
The assertion is everzealous and fail tests like:
renamable $x3 = LI8 0
STD renamable $x3, 16, $x1
renamable $x3 = LI8 0
Remove the assertion since killed flag of $x3 is not mandentory.
Differential Revision: https://reviews.llvm.org/D68344
llvm-svn: 374515
Add a helper function getMCSymbolForTOCPseudoMO to clean up PPCAsmPrinter
a little bit.
Differential Revision: https://reviews.llvm.org/D68721
llvm-svn: 374420
Re-apply 9fdfb045ae8b/r365676 with fixes for PPC and Hexagon. This involved
moving defaults from TargetTransformInfoImplBase to MCSubtargetInfo.
Rework the TTI cache and software prefetching APIs to prepare for the
introduction of a general system model. Changes include:
- Marking existing interfaces const and/or override as appropriate
- Adding comments
- Adding BasicTTIImpl interfaces that delegate to a subtarget
implementation
- Moving the default TargetTransformInfoImplBase implementation to a default
MCSubtarget implementation
Only a handful of targets use these interfaces currently: AArch64, Hexagon, PPC
and SystemZ. AArch64 already has a custom subtarget implementation, so its
custom TTI implementation is migrated to use the new facilities in BasicTTIImpl
to invoke its custom subtarget implementation. The custom TTI implementations
continue to exist for the other targets with this change. They are not moved
over to subtarget-based implementations.
The end goal is to have the default subtarget implementation defer to the system
model defined by the target. With this change, the default MCSubtargetInfo
implementation essentially returns the defaults TargetTransformInfoImplBase used
to return. Existing users of TTI defaults will hit the defaults now in
MCSubtargetInfo. Targets that define their own custom TTI implementations won't
use the BasicTTIImpl implementations that route to the subtarget.
Once system models are in place for the targets that use these interfaces, their
custom TTI implementations can be removed.
Differential Revision: https://reviews.llvm.org/D63614
llvm-svn: 374205
Also Revert "[LoopVectorize] Fix non-debug builds after rL374017"
This reverts commit 9f41deccc0.
This reverts commit 18b6fe07bc.
The patch is breaking PowerPC internal build, checked with author, reverting
on behalf of him for now due to timezone.
llvm-svn: 374091
In loop-vectorize, interleave count and vector factor depend on target register number. Currently, it does not
estimate different register pressure for different register class separately(especially for scalar type,
float type should not be on the same position with int type), so it's not accurate. Specifically,
it causes too many times interleaving/unrolling, result in too many register spills in loop body and hurting performance.
So we need classify the register classes in IR level, and importantly these are abstract register classes,
and are not the target register class of backend provided in td file. It's used to establish the mapping between
the types of IR values and the number of simultaneous live ranges to which we'd like to limit for some set of those types.
For example, POWER target, register num is special when VSX is enabled. When VSX is enabled, the number of int scalar register is 32(GPR),
float is 64(VSR), but for int and float vector register both are 64(VSR). So there should be 2 kinds of register class when vsx is enabled,
and 3 kinds of register class when VSX is NOT enabled.
It runs on POWER target, it makes big(+~30%) performance improvement in one specific bmk(503.bwaves_r) of spec2017 and no other obvious degressions.
Differential revision: https://reviews.llvm.org/D67148
llvm-svn: 374017
Doing this makes MSVC complain that `empty(someRange)` could refer to
either C++17's std::empty or LLVM's llvm::empty, which previously we
avoided via SFINAE because std::empty is defined in terms of an empty
member rather than begin and end. So, switch callers over to the new
method as it is added.
https://reviews.llvm.org/D68439
llvm-svn: 373935
This is patch aims to group together the `CRNotPat` multi class instantiations
within the `PPCInstrInfo.td` file.
Integer instantiations of the multi class are grouped together into a section,
and the floating point patterns are separated into its own section.
Differential Revision: https://reviews.llvm.org/D67975
llvm-svn: 373869
Summary:
This is follow up patch of https://reviews.llvm.org/D67595.
Adjust naming and the Commutable operands for additional patterns
to make it easier to read.
The testcase update also show that we can save some unecessary fmr as
well.
Reviewers: #powerpc, steven.zhang, hfinkel, nemanjai
Reviewed By: #powerpc, nemanjai
Subscribers: wuzish, hiraditya, kbarton, MaskRay, shchenz, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D68112
llvm-svn: 373652
Store rlwinm Rx, Ry, 32, 0, 31 as rlwinm Rx, Ry, 0, 0, 31 and store
rldicl Rx, Ry, 64, 0 as rldicl Rx, Ry, 0, 0. Otherwise SH field is overflow and
fails assertion in assembly printing stage.
Differential Revision: https://reviews.llvm.org/D66991
llvm-svn: 373519
Replace with the MachineFunction. X86 is the only user, and only uses
it for the function. This removes one obstacle from using this in
GlobalISel. The other is the more tolerable EVT argument.
The X86 use of the function seems questionable to me. It checks hasFP,
before frame lowering.
llvm-svn: 373292
Summary:
g++ build emits warning:
llvm/lib/Target/PowerPC/PPCAsmPrinter.cpp:667:77: error: suggest parentheses around ?&&? within ?||? [-Werror=parentheses]
assert(MO.isGlobal() || MO.isCPI() || MO.isJTI() || MO.isBlockAddress() &&
~~~~~~~~~~~~~~~~~~~~^~
"Unexpected operand type for LWZtoc pseudo.");
I believe the intension is to assert all different types,
so we should add a parentheses to include all '||'.
Reviewers: #powerpc, sfertile, hubert.reinterpretcast, Xiangling_L
Reviewed By: Xiangling_L
Subscribers: wuzish, nemanjai, hiraditya, kbarton, MaskRay, shchenz, steven.zhang, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D68180
llvm-svn: 373164
This patch emits the function descriptor csect for functions with definitions
under both 32-bit/64-bit mode on AIX.
Differential Revision: https://reviews.llvm.org/D66724
llvm-svn: 373009
Summary:
This was found during review of https://reviews.llvm.org/D66050.
In the simple test of fdiv, we miss to fold
```
fneg 2, 2
xsmaddasp 3, 2, 0
```
to
```
xsnmsubasp 3, 2, 0
```
We have the patterns for Double Precision and vectors, just missing
Single Precision, the patch add that.
Reviewers: #powerpc, hfinkel, nemanjai, steven.zhang
Reviewed By: #powerpc, steven.zhang
Subscribers: wuzish, hiraditya, kbarton, MaskRay, shchenz, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D67595
llvm-svn: 372985
Neither the base implementation of findCommutedOpIndices nor any in-tree target modifies the instruction passed in and there is no reason why they would in the future.
Committed on behalf of @hvdijk (Harald van Dijk)
Differential Revision: https://reviews.llvm.org/D66138
llvm-svn: 372882
Recommit: fix asan errors.
The way MachinePipeliner uses these target hooks is stateful - we reduce trip
count by one per call to reduceLoopCount. It's a little overfit for hardware
loops, where we don't have to worry about stitching a loop induction variable
across prologs and epilogs (the induction variable is implicit).
This patch introduces a new API:
/// Analyze loop L, which must be a single-basic-block loop, and if the
/// conditions can be understood enough produce a PipelinerLoopInfo object.
virtual std::unique_ptr<PipelinerLoopInfo>
analyzeLoopForPipelining(MachineBasicBlock *LoopBB) const;
The return value is expected to be an implementation of the abstract class:
/// Object returned by analyzeLoopForPipelining. Allows software pipelining
/// implementations to query attributes of the loop being pipelined.
class PipelinerLoopInfo {
public:
virtual ~PipelinerLoopInfo();
/// Return true if the given instruction should not be pipelined and should
/// be ignored. An example could be a loop comparison, or induction variable
/// update with no users being pipelined.
virtual bool shouldIgnoreForPipelining(const MachineInstr *MI) const = 0;
/// Create a condition to determine if the trip count of the loop is greater
/// than TC.
///
/// If the trip count is statically known to be greater than TC, return
/// true. If the trip count is statically known to be not greater than TC,
/// return false. Otherwise return nullopt and fill out Cond with the test
/// condition.
virtual Optional<bool>
createTripCountGreaterCondition(int TC, MachineBasicBlock &MBB,
SmallVectorImpl<MachineOperand> &Cond) = 0;
/// Modify the loop such that the trip count is
/// OriginalTC + TripCountAdjust.
virtual void adjustTripCount(int TripCountAdjust) = 0;
/// Called when the loop's preheader has been modified to NewPreheader.
virtual void setPreheader(MachineBasicBlock *NewPreheader) = 0;
/// Called when the loop is being removed.
virtual void disposed() = 0;
};
The Pipeliner (ModuloSchedule.cpp) can use this object to modify the loop while
allowing the target to hold its own state across all calls. This API, in
particular the disjunction of creating a trip count check condition and
adjusting the loop, improves the code quality in ModuloSchedule.cpp.
llvm-svn: 372463
We always(and only) check the NLP flag after calling
classifyGlobalReference to see whether it is accessed
indirectly.
Refactor to code to use isGVIndirectSym instead.
llvm-svn: 372417
The way MachinePipeliner uses these target hooks is stateful - we reduce trip
count by one per call to reduceLoopCount. It's a little overfit for hardware
loops, where we don't have to worry about stitching a loop induction variable
across prologs and epilogs (the induction variable is implicit).
This patch introduces a new API:
/// Analyze loop L, which must be a single-basic-block loop, and if the
/// conditions can be understood enough produce a PipelinerLoopInfo object.
virtual std::unique_ptr<PipelinerLoopInfo>
analyzeLoopForPipelining(MachineBasicBlock *LoopBB) const;
The return value is expected to be an implementation of the abstract class:
/// Object returned by analyzeLoopForPipelining. Allows software pipelining
/// implementations to query attributes of the loop being pipelined.
class PipelinerLoopInfo {
public:
virtual ~PipelinerLoopInfo();
/// Return true if the given instruction should not be pipelined and should
/// be ignored. An example could be a loop comparison, or induction variable
/// update with no users being pipelined.
virtual bool shouldIgnoreForPipelining(const MachineInstr *MI) const = 0;
/// Create a condition to determine if the trip count of the loop is greater
/// than TC.
///
/// If the trip count is statically known to be greater than TC, return
/// true. If the trip count is statically known to be not greater than TC,
/// return false. Otherwise return nullopt and fill out Cond with the test
/// condition.
virtual Optional<bool>
createTripCountGreaterCondition(int TC, MachineBasicBlock &MBB,
SmallVectorImpl<MachineOperand> &Cond) = 0;
/// Modify the loop such that the trip count is
/// OriginalTC + TripCountAdjust.
virtual void adjustTripCount(int TripCountAdjust) = 0;
/// Called when the loop's preheader has been modified to NewPreheader.
virtual void setPreheader(MachineBasicBlock *NewPreheader) = 0;
/// Called when the loop is being removed.
virtual void disposed() = 0;
};
The Pipeliner (ModuloSchedule.cpp) can use this object to modify the loop while
allowing the target to hold its own state across all calls. This API, in
particular the disjunction of creating a trip count check condition and
adjusting the loop, improves the code quality in ModuloSchedule.cpp.
llvm-svn: 372376
This reverts r372314, reapplying r372285 and the commits which depend
on it (r372286-r372293, and r372296-r372297)
This was missing one switch to getTargetConstant in an untested case.
llvm-svn: 372338
This broke the Chromium build, causing it to fail with e.g.
fatal error: error in backend: Cannot select: t362: v4i32 = X86ISD::VSHLI t392, Constant:i8<15>
See llvm-commits thread of r372285 for details.
This also reverts r372286, r372287, r372288, r372289, r372290, r372291,
r372292, r372293, r372296, and r372297, which seemed to depend on the
main commit.
> Encode them directly as an imm argument to G_INTRINSIC*.
>
> Since now intrinsics can now define what parameters are required to be
> immediates, avoid using registers for them. Intrinsics could
> potentially want a constant that isn't a legal register type. Also,
> since G_CONSTANT is subject to CSE and legalization, transforms could
> potentially obscure the value (and create extra work for the
> selector). The register bank of a G_CONSTANT is also meaningful, so
> this could throw off future folding and legalization logic for AMDGPU.
>
> This will be much more convenient to work with than needing to call
> getConstantVRegVal and checking if it may have failed for every
> constant intrinsic parameter. AMDGPU has quite a lot of intrinsics wth
> immarg operands, many of which need inspection during lowering. Having
> to find the value in a register is going to add a lot of boilerplate
> and waste compile time.
>
> SelectionDAG has always provided TargetConstant for constants which
> should not be legalized or materialized in a register. The distinction
> between Constant and TargetConstant was somewhat fuzzy, and there was
> no automatic way to force usage of TargetConstant for certain
> intrinsic parameters. They were both ultimately ConstantSDNode, and it
> was inconsistently used. It was quite easy to mis-select an
> instruction requiring an immediate. For SelectionDAG, start emitting
> TargetConstant for these arguments, and using timm to match them.
>
> Most of the work here is to cleanup target handling of constants. Some
> targets process intrinsics through intermediate custom nodes, which
> need to preserve TargetConstant usage to match the intrinsic
> expectation. Pattern inputs now need to distinguish whether a constant
> is merely compatible with an operand or whether it is mandatory.
>
> The GlobalISelEmitter needs to treat timm as a special case of a leaf
> node, simlar to MachineBasicBlock operands. This should also enable
> handling of patterns for some G_* instructions with immediates, like
> G_FENCE or G_EXTRACT.
>
> This does include a workaround for a crash in GlobalISelEmitter when
> ARM tries to uses "imm" in an output with a "timm" pattern source.
llvm-svn: 372314
Encode them directly as an imm argument to G_INTRINSIC*.
Since now intrinsics can now define what parameters are required to be
immediates, avoid using registers for them. Intrinsics could
potentially want a constant that isn't a legal register type. Also,
since G_CONSTANT is subject to CSE and legalization, transforms could
potentially obscure the value (and create extra work for the
selector). The register bank of a G_CONSTANT is also meaningful, so
this could throw off future folding and legalization logic for AMDGPU.
This will be much more convenient to work with than needing to call
getConstantVRegVal and checking if it may have failed for every
constant intrinsic parameter. AMDGPU has quite a lot of intrinsics wth
immarg operands, many of which need inspection during lowering. Having
to find the value in a register is going to add a lot of boilerplate
and waste compile time.
SelectionDAG has always provided TargetConstant for constants which
should not be legalized or materialized in a register. The distinction
between Constant and TargetConstant was somewhat fuzzy, and there was
no automatic way to force usage of TargetConstant for certain
intrinsic parameters. They were both ultimately ConstantSDNode, and it
was inconsistently used. It was quite easy to mis-select an
instruction requiring an immediate. For SelectionDAG, start emitting
TargetConstant for these arguments, and using timm to match them.
Most of the work here is to cleanup target handling of constants. Some
targets process intrinsics through intermediate custom nodes, which
need to preserve TargetConstant usage to match the intrinsic
expectation. Pattern inputs now need to distinguish whether a constant
is merely compatible with an operand or whether it is mandatory.
The GlobalISelEmitter needs to treat timm as a special case of a leaf
node, simlar to MachineBasicBlock operands. This should also enable
handling of patterns for some G_* instructions with immediates, like
G_FENCE or G_EXTRACT.
This does include a workaround for a crash in GlobalISelEmitter when
ARM tries to uses "imm" in an output with a "timm" pattern source.
llvm-svn: 372285
We currently produce a load, followed by (possibly a move for integers and) a
splat as separate instructions. VSX has always had a splatting load for
doublewords, but as of Power9, we have it for words as well. This patch just
exploits these instructions.
Differential revision: https://reviews.llvm.org/D63624
llvm-svn: 372139
* Reordered MVT simple types to group scalable vector types
together.
* New range functions in MachineValueType.h to only iterate over
the fixed-length int/fp vector types.
* Stopped backends which don't support scalable vector types from
iterating over scalable types.
Reviewers: sdesmalen, greened
Reviewed By: greened
Differential Revision: https://reviews.llvm.org/D66339
llvm-svn: 372099
Add the missing piece of r372029.
Somehow when the patch for review D61961 was committed, only the test case
went in and the code didn't. This of course caused all kinds of build bot
breaks.
This patch just adds the code for that patch.
Author: Lei Huang
Differential revision: https://reviews.llvm.org/D61961
llvm-svn: 372043
Summary:
Since the SPE4RC register class contains an identical set of registers
and an identical spill size to the GPRC class its slightly confusing
the tablegen emitter. It's preventing the GPRC_and_GPRC_NOR0 synthesized
register class from inheriting VTs and AltOrders from GPRC or GPRC_NOR0.
This is because SPE4C is found first in the super register class list
when inheriting these properties and it doesn't set the VTs or
AltOrders the same way as GPRC or GPRC_NOR0.
This patch replaces all uses of GPE4RC with GPRC and allows GPRC and
GPRC_NOR0 to contain f32.
The test changes here are because the AltOrders are being inherited
to GPRC_NOR0 now.
Found while trying to determine if getCommonSubClass needs to take
a VT argument. It was originally added to support fp128 on x86-64,
I've changed some things about that so that it might be needed
anymore. But a PowerPC test crashed without it and I think its
due to this subclass issue.
Reviewers: jhibbits, nemanjai, kbarton, hfinkel
Subscribers: wuzish, nemanjai, mehdi_amini, hiraditya, kbarton, MaskRay, dexonsmith, jsji, shchenz, steven.zhang, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D67513
llvm-svn: 371779
Summary:
This is patch is part of a series to introduce an Alignment type.
See this thread for context: http://lists.llvm.org/pipermail/llvm-dev/2019-July/133851.html
See this patch for the introduction of the type: https://reviews.llvm.org/D64790
Reviewers: courbet, JDevlieghere, alexshap, rupprecht, jhenderson
Subscribers: sdardis, nemanjai, hiraditya, kbarton, jakehehrlich, jrtc27, MaskRay, atanasyan, jsji, seiya, cfe-commits, llvm-commits
Tags: #clang, #llvm
Differential Revision: https://reviews.llvm.org/D67499
llvm-svn: 371742
Summary:
This catches malformed mir files which specify alignment as log2 instead of pow2.
See https://reviews.llvm.org/D65945 for reference,
This is patch is part of a series to introduce an Alignment type.
See this thread for context: http://lists.llvm.org/pipermail/llvm-dev/2019-July/133851.html
See this patch for the introduction of the type: https://reviews.llvm.org/D64790
Reviewers: courbet
Subscribers: MatzeB, qcolombet, dschuff, arsenm, sdardis, nemanjai, jvesely, nhaehnle, hiraditya, kbarton, asb, rbar, johnrusso, simoncook, apazos, sabuasal, niosHD, jrtc27, MaskRay, zzheng, edward-jones, atanasyan, rogfer01, MartinMosbeck, brucehoult, the_o, PkmX, jocewei, jsji, Petar.Avramovic, asbirlea, s.egerton, pzheng, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D67433
llvm-svn: 371608
Summary:
This is patch is part of a series to introduce an Alignment type.
See this thread for context: http://lists.llvm.org/pipermail/llvm-dev/2019-July/133851.html
See this patch for the introduction of the type: https://reviews.llvm.org/D64790
Reviewers: courbet
Subscribers: nemanjai, javed.absar, hiraditya, kbarton, asb, rbar, johnrusso, simoncook, apazos, sabuasal, niosHD, jrtc27, MaskRay, zzheng, edward-jones, rogfer01, MartinMosbeck, brucehoult, the_o, PkmX, jocewei, jsji, s.egerton, pzheng, ychen, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D67267
llvm-svn: 371212
Summary:
This is patch is part of a series to introduce an Alignment type.
See this thread for context: http://lists.llvm.org/pipermail/llvm-dev/2019-July/133851.html
See this patch for the introduction of the type: https://reviews.llvm.org/D64790
Reviewers: courbet
Subscribers: jyknight, sdardis, nemanjai, javed.absar, hiraditya, kbarton, fedor.sergeev, asb, rbar, johnrusso, simoncook, apazos, sabuasal, niosHD, jrtc27, MaskRay, zzheng, edward-jones, atanasyan, rogfer01, MartinMosbeck, brucehoult, the_o, PkmX, jocewei, jsji, s.egerton, pzheng, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D67229
llvm-svn: 371200
Summary:
This patch renames functions that takes or returns alignment as log2, this patch will help with the transition to llvm::Align.
The renaming makes it explicit that we deal with log(alignment) instead of a power of two alignment.
A few renames uncovered dubious assignments:
- `MirParser`/`MirPrinter` was expecting powers of two but `MachineFunction` and `MachineBasicBlock` were using deal with log2(align). This patch fixes it and updates the documentation.
- `MachineBlockPlacement` exposes two flags (`align-all-blocks` and `align-all-nofallthru-blocks`) supposedly interpreted as power of two alignments, internally these values are interpreted as log2(align). This patch updates the documentation,
- `MachineFunctionexposes` exposes `align-all-functions` also interpreted as power of two alignment, internally this value is interpreted as log2(align). This patch updates the documentation,
Reviewers: lattner, thegameg, courbet
Subscribers: dschuff, arsenm, jyknight, dylanmckay, sdardis, nemanjai, jvesely, nhaehnle, javed.absar, hiraditya, kbarton, fedor.sergeev, asb, rbar, johnrusso, simoncook, apazos, sabuasal, niosHD, jrtc27, MaskRay, zzheng, edward-jones, atanasyan, rogfer01, MartinMosbeck, brucehoult, the_o, dexonsmith, PkmX, jocewei, jsji, Jim, s.egerton, llvm-commits, courbet
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D65945
llvm-svn: 371045
Unlike ppc64, which has ADDISgotTprelHA+LDgotTprelL pairs,
ppc32 just uses LDgotTprelL32, so it does not make lots of sense to use
_LO without a paired _HA.
Emit R_PPC_GOT_TPREL16 instead R_PPC_GOT_TPREL16_LO to match GCC, and
get better linker relocation check. Note, R_PPC_GOT_TPREL16_{HA,LO}
don't have good linker support:
(a) lld does not support R_PPC_GOT_TPREL16_{HA,LO}.
(b) Top of tree ld.bfd does not support R_PPC_GOT_REL16_HA Initial-Exec -> Local-Exec relaxation:
// a.o
addis 3, 3, tsd_tls@got@tprel@ha
lwz 3, tsd_tls@got@tprel@l(3)
add 3, 3, tsd_tls@tls
// b.o
.section .tdata,"awT"; .globl tsd_tls; tsd_tls:
// ld/ld-new a.o b.o
internal error, aborting at ../../bfd/elf32-ppc.c:7952 in ppc_elf_relocate_section
Reviewed By: adalava
Differential Revision: https://reviews.llvm.org/D66925
llvm-svn: 370426
Summary:
Reported in https://github.com/opencv/opencv/issues/15413.
We have serveral extended mnemonics for Move To/From Vector-Scalar Register Instructions
eg: mffprd,mtfprd etc.
We only support one of them, this patch add the others.
Reviewers: nemanjai, steven.zhang, hfinkel, #powerpc
Reviewed By: hfinkel
Subscribers: wuzish, qcolombet, hiraditya, kbarton, MaskRay, shchenz, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D66963
llvm-svn: 370411
Summary:
Adds support for generating the .data section in assembly files for global variables with a non-zero initialization. The support for writing the .data section in XCOFF object files will be added in a follow-on patch. Any relocations are not included in this patch.
Reviewers: hubert.reinterpretcast, sfertile, jasonliu, daltenty, Xiangling_L
Reviewed by: hubert.reinterpretcast
Subscribers: nemanjai, hiraditya, kbarton, MaskRay, jsji, wuzish, shchenz, DiggerLin, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D66154
llvm-svn: 369869
The smin opcode and friends for v1i128 are incorrectly marked as legal for PPC.
Change them to expand.
Differential Revision: https://reviews.llvm.org/D64960
llvm-svn: 369797
Prefer `MCFixupKind` where possible and add getTargetKind() to
convert to `unsigned` when needed rather than scattering cast
operators around the place.
Differential Revision: https://reviews.llvm.org/D59890
llvm-svn: 369720
A lot of places in the code combine checks for both ABI (SVR4/Darwin/AIX) and
addressing mode (64-bit vs 32-bit). In an attempt to make some of the code more
readable I've added a couple functions that combine checking for the ELF abi and
64-bit/32-bit code at once. As we add more AIX support I intend to add similar
functions for the AIX ABI.
Differential Revision: https://reviews.llvm.org/D65814
llvm-svn: 369658
Previously we would get the csect a symbol was contained in through its
fragment. This works only if we are writing an object file, and only for
defined symbols. To fix this we set the contating csect explicitly on the
MCSymbolXCOFF object.
Differential Revision: https://reviews.llvm.org/D66032
llvm-svn: 369657
Adds Wrapper classes for MCSymbol and MCSection into the XCOFF target
object writer. Also adds a class to represent the top-level sections, which we
materialize in the ObjectWriter.
executePostLayoutBinding will map all csects into the appropriate
container depending on its storage mapping class, and map all symbols
into their containing csect. Once all symbols have been processed we
- Assign addresses and symbol table indices.
- Calaculte section sizes.
- Build the section header table.
- Assign the sections raw-pointer value for non-virtual sections.
Since the .bss section is virtual, writing the header table is enough to
add support. Writing of a sections raw data, or of any relocations is
not included in this patch.
Testing is done by dumping the section header table, but it needs to be
extended to include dumping the symbol table once readobj support for
dumping auxiallary entries lands.
Differential Revision: https://reviews.llvm.org/D65159
llvm-svn: 369454
Summary:
If we have a MI marked with bitcast bits, but without input operands,
PeepholeOptimizer might crash with assert.
eg:
If we apply the changes in PPCInstrVSX.td as in this patch:
[(set v4i32:$XT, (bitconvert (v16i8 immAllOnesV)))]>;
We will get assert in PeepholeOptimizer.
```
llvm-lit llvm-project/llvm/test/CodeGen/PowerPC/build-vector-tests.ll -v
llvm-project/llvm/include/llvm/CodeGen/MachineInstr.h:417: const
llvm::MachineOperand &llvm::MachineInstr::getOperand(unsigned int)
const: Assertion `i < getNumOperands() && "getOperand() out of range!"'
failed.
```
The fix is to abort if we found out of bound access.
Reviewers: qcolombet, MatzeB, hfinkel, arsenm
Reviewed By: qcolombet
Subscribers: wdng, arsenm, steven.zhang, wuzish, nemanjai, hiraditya, kbarton, MaskRay, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D65542
llvm-svn: 369261
Summary:
This clang-tidy check is looking for unsigned integer variables whose initializer
starts with an implicit cast from llvm::Register and changes the type of the
variable to llvm::Register (dropping the llvm:: where possible).
Partial reverts in:
X86FrameLowering.cpp - Some functions return unsigned and arguably should be MCRegister
X86FixupLEAs.cpp - Some functions return unsigned and arguably should be MCRegister
X86FrameLowering.cpp - Some functions return unsigned and arguably should be MCRegister
HexagonBitSimplify.cpp - Function takes BitTracker::RegisterRef which appears to be unsigned&
MachineVerifier.cpp - Ambiguous operator==() given MCRegister and const Register
PPCFastISel.cpp - No Register::operator-=()
PeepholeOptimizer.cpp - TargetInstrInfo::optimizeLoadInstr() takes an unsigned&
MachineTraceMetrics.cpp - MachineTraceMetrics lacks a suitable constructor
Manual fixups in:
ARMFastISel.cpp - ARMEmitLoad() now takes a Register& instead of unsigned&
HexagonSplitDouble.cpp - Ternary operator was ambiguous between unsigned/Register
HexagonConstExtenders.cpp - Has a local class named Register, used llvm::Register instead of Register.
PPCFastISel.cpp - PPCEmitLoad() now takes a Register& instead of unsigned&
Depends on D65919
Reviewers: arsenm, bogner, craig.topper, RKSimon
Reviewed By: arsenm
Subscribers: RKSimon, craig.topper, lenary, aemerson, wuzish, jholewinski, MatzeB, qcolombet, dschuff, jyknight, dylanmckay, sdardis, nemanjai, jvesely, wdng, nhaehnle, sbc100, jgravelle-google, kristof.beyls, hiraditya, aheejin, kbarton, fedor.sergeev, javed.absar, asb, rbar, johnrusso, simoncook, apazos, sabuasal, niosHD, jrtc27, MaskRay, zzheng, edward-jones, atanasyan, rogfer01, MartinMosbeck, brucehoult, the_o, tpr, PkmX, jocewei, jsji, Petar.Avramovic, asbirlea, Jim, s.egerton, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D65962
llvm-svn: 369041
Now that we've moved to C++14, we no longer need the llvm::make_unique
implementation from STLExtras.h. This patch is a mechanical replacement
of (hopefully) all the llvm::make_unique instances across the monorepo.
llvm-svn: 369013
Summary:
xxspltib/vspltisb are 3 cycle PM instructions,
xxleqv is 2 cycle ALU instruction.
We should use xxleqv to set all one vectors.
Reviewers: hfinkel, nemanjai, steven.zhang
Subscribers: hiraditya, kbarton, MaskRay, shchenz, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D65529
llvm-svn: 369006
This patch implements global address lowering for 32/64 bit with small/large code models.
1.For 32bit large code model on AIX, there are newly added pseudo opcode LWZtocL & ADDIStocHA32, the support of which on MC layer will be
provided by future patches.
2.The default code model on AIX should be small code model.
3.Since AIX does not have medium code model, "report_fatal_error" when users specify it.
Differential Revision: https://reviews.llvm.org/D63547
llvm-svn: 368744
Trying again with the code changes (and not just the new test).
Summary:
This patch fixes the offsets of fields in the stack frame linkage save
area for AIX.
Reviewers: sfertile, hubert.reinterpretcast, jasonliu, Xiangling_L, xingxue, ZarkoCA, daltenty
Reviewed By: hubert.reinterpretcast
Subscribers: wuzish, nemanjai, hiraditya, kbarton, MaskRay, jsji, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D64424
Patch by Chris Bowler!
llvm-svn: 368721
The legalizer would hit an assertion on PowerPC platform when truncating
a vector whose size is not power of 2. This patch is to add a check to
prevent vectors with such odd-size elements from being custom lowered.
Reviewed By: Hal Finkel
Differential Revision: https://reviews.llvm.org/D65261
llvm-svn: 368654
Summary:
This patch enable assembly output of local commons for AIX using .lcomm
directives. Adds a EmitXCOFFLocalCommonSymbol to MCStreamer so we can emit the
AIX version of .lcomm assembly directives which include a csect name. Handle the
case of BSS locals in PPCAIXAsmPrinter by using EmitXCOFFLocalCommonSymbol. Adds
a test for generating .lcomm on AIX Targets.
Reviewers: cebowleratibm, hubert.reinterpretcast, Xiangling_L, jasonliu, sfertile
Reviewed By: sfertile
Subscribers: wuzish, nemanjai, hiraditya, kbarton, MaskRay, jsji, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D64825
llvm-svn: 368306
Summary:
This is patch is part of a serie to introduce an Alignment type.
See this thread for context: http://lists.llvm.org/pipermail/llvm-dev/2019-July/133851.html
See this patch for the introduction of the type: https://reviews.llvm.org/D64790
Reviewers: courbet, jfb, jakehehrlich
Reviewed By: jfb
Subscribers: wuzish, jholewinski, arsenm, dschuff, nemanjai, jvesely, nhaehnle, javed.absar, sbc100, jgravelle-google, hiraditya, aheejin, kbarton, asb, rbar, johnrusso, simoncook, apazos, sabuasal, niosHD, jrtc27, MaskRay, zzheng, edward-jones, rogfer01, MartinMosbeck, brucehoult, the_o, dexonsmith, PkmX, jocewei, jsji, s.egerton, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D65514
llvm-svn: 367828
Summary:
When combining `extsw` and `sldi` in `PPCMIPeephole`, we have to check
if `extsw`'s second operand is a virtual register, otherwise we might
get miscompile.
Differential Revision: https://reviews.llvm.org/D65315
llvm-svn: 367645
In PowerPC, there is instruction to load vector in big endian element order when it's in little endian target.
So we can combine vector load + reverse into big endian load to eliminate the swap instruction.
Also combine vector reverse + store into big endian store.
Differential Revision: https://reviews.llvm.org/D65063
llvm-svn: 367516
In PowerPC, there is instruction to load vector in big endian element order when it's in little endian target.
So we can combine vector load + reverse into big endian load to eliminate the swap instruction.
Also combine vector reverse + store into big endian store.
llvm-svn: 367382
Addresses number of comment made on D64652 after commiting:
- Reorders function decls in the TargetLoweringObjectFileXCOFF class.
- Fix comment in MCSectionXCOFF to include description of external reference
csects.
- Convert several llvm_unreachables to report_fatal_error
- Convert several dyn_casts to casts as they are expected not to fail.
- Avoid copying DataLayout object.
llvm-svn: 367324
Adds machine operand lowering for MCSymbolSDNodes to the PowerPC
backend. This is needed to produce call instructions in assembly for AIX
because the callee operand is a MCSymbolSDNode. The test is XFAIL'ed for
asserts due to a (valid) assertion in PEI that the AIX ABI isn't supported yet.
Differential Revision: https://reviews.llvm.org/D63738
llvm-svn: 367133
In preperation for AIX support in FrameLowering: replace a number of literal
'8' that represent the stack offset of the condition register save area with
a member in PPCFrameLowering.
Patch by Chris Bowler.
llvm-svn: 367111
Summary:
In PostRA phase, we often have to find out the most recent definition
of a register. This patch adds getDefMIPostRA so that other methods
can use it rather than implementing it repeatedly.
Differential Revision: https://reviews.llvm.org/D65131
llvm-svn: 366990
Currently PowerPC backend emits code like this:
r3 = li 0
std r3, 264(r1)
r3 = li 0
std r3, 272(r1)
This patch fixes that and other cases where a register already contains a value that is loaded so we will get:
r3 = li 0
std r3, 264(r1)
std r3, 272(r1)
Differential Revision: https://reviews.llvm.org/D64220
llvm-svn: 366840
Replace float load/store pair with integer load/store pair when it's only used in load/store,
because float load/store instructions cost more cycles then integer load/store.
A typical scenario is when there is a call with more than 13 float arguments passing, we need pass them by stack.
So we need a load/store pair to do such memory operation if the variable is global variable.
Differential Revision: https://reviews.llvm.org/D64195
llvm-svn: 366775
Summary:
Since we are planning to add ADDIStocHA for 32bit in later patch, we decided
to change 64bit one first to follow naming convention with 8 behind opcode.
Patch by: Xiangling_L
Differential Revision: https://reviews.llvm.org/D64814
llvm-svn: 366731
Stubs out a TargetLoweringObjectFileXCOFF class, implementing only
SelectSectionForGlobal for common symbols. Also adds an override of
EmitGlobalVariable in PPCAIXAsmPrinter which adds a number of defensive errors
and adds support for emitting common globals.
llvm-svn: 366727
Summary:
Missed in the original commit, use the correct callee-saved register
list for spilling, instead of the standard SVR432 list. This avoids
needlessly spilling the SPE non-volatile registers when they're not used.
As part of this, also add where missing, and sort, the spill opcode
checks for SPE and SPE4 register classes.
Reviewers: nemanjai, hfinkel, joerg
Subscribers: kbarton, jsji, llvm-commits
Differential Revision: https://reviews.llvm.org/D56703
llvm-svn: 366319
Summary:
Pointed out in a comment for D49754, register spilling will currently
spill SPE registers at almost any offset. However, the instructions
`evstdd` and `evldd` require a) 8-byte alignment, and b) a limit of 256
(unsigned) bytes from the base register, as the offset must fix into a
5-bit offset, which ranges from 0-31 (indexed in double-words).
The update to the register spill test is taken partially from the test
case shown in D49754.
Additionally, pointed out by Kei Thomsen, globals will currently use
evldd/evstdd, though the offset isn't known at compile time, so may
exceed the 8-bit (unsigned) offset permitted. This fixes that as well,
by forcing it to always use evlddx/evstddx when accessing globals.
Part of the patch contributed by Kei Thomsen.
Reviewers: nemanjai, hfinkel, joerg
Subscribers: kbarton, jsji, llvm-commits
Differential Revision: https://reviews.llvm.org/D54409
llvm-svn: 366318
Summary:
This is exposed by our internal testing.
The reduced testcase will assert with "Impossible reg-to-reg copy"
We can't use COPY to do 32-bit to 64-bit conversion.
Reviewers: kbarton, hfinkel, nemanjai
Reviewed By: hfinkel
Subscribers: hiraditya, MaskRay, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D64499
llvm-svn: 366255
Summary: llvm/IR/GlobalValue.h can't be included in MC, that creates a circular dependency between MC and IR libraries. This circular dependency is causing an issue for build system that enforce layering.
Author: Xiangling_L
Reviewers: sfertile, jasonliu, hubert.reinterpretcast, gribozavr
Reviewed By: gribozavr
Subscribers: wuzish, nemanjai, hiraditya, kbarton, MaskRay, jsji, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D64445
llvm-svn: 365701
Rework the TTI cache and software prefetching APIs to prepare for the
introduction of a general system model. Changes include:
- Marking existing interfaces const and/or override as appropriate
- Adding comments
- Adding BasicTTIImpl interfaces that delegate to a subtarget
implementation
- Adding a default "no information" subtarget implementation
Only a handful of targets use these interfaces currently: AArch64,
Hexagon, PPC and SystemZ. AArch64 already has a custom subtarget
implementation, so its custom TTI implementation is migrated to use
the new facilities in BasicTTIImpl to invoke its custom subtarget
implementation. The custom TTI implementations continue to exist for
the other targets with this change. They are not moved over to
subtarget-based implementations.
The end goal is to have the default subtarget implementation defer to
the system model defined by the target. With this change, the default
subtarget implementation essentially returns "no information" for
these interfaces. None of the existing users of TTI will hit that
implementation because they define their own custom TTI
implementations and won't use the BasicTTIImpl implementations.
Once system models are in place for the targets that use these
interfaces, their custom TTI implementations can be removed.
Differential Revision: https://reviews.llvm.org/D63614
llvm-svn: 365676
Stubs out a number of the classes needed to produce a new object file format
(XCOFF) for the powerpc-aix target. For testing input is an empty module which
produces an object file with just a file header.
Differential Revision: https://reviews.llvm.org/D61694
llvm-svn: 365541
Summary:
`extsw` and `sldi` are supposed to be combined if they are in the same
BB in instruction selection phase. This patch handles the case where
extsw and sldi are not in the same BB.
Differential Revision: https://reviews.llvm.org/D63806
llvm-svn: 365430
The indirect call sequence on PPC requires that the TOC base register be saved
prior to the indirect call and restored after the call since the indirect call
may branch to a global entry point in another DSO which will update the TOC
base. Over the last couple of years, we have improved this to:
- be able to hoist TOC saves from loops (with changes to MachineLICM)
- avoid multiple saves when one dominates the other[s]
However, it is still possible to have multiple TOC saves dynamically in the
execution path if there is no dominance relationship between them.
This patch moves the TOC save to the prologue when one of the TOC saves is in a
block that post-dominates entry (i.e. it cannot be avoided) or if it is in a
block that is hotter than entry.
Differential revision: https://reviews.llvm.org/D63803
llvm-svn: 365232
Summary:
"ww" and "ws" are both constraint codes for VSX vector registers that
hold scalar double data. "ww" is preferred for float while "ws" is
preferred for double.
Reviewed By: jsji
Differential Revision: https://reviews.llvm.org/D64119
llvm-svn: 365106
Summary:
This is the backend part of [[ https://bugs.llvm.org/show_bug.cgi?id=42457 | PR42457 ]].
In middle-end, we'd want to prefer the form with two adds - D63992,
but as this diff shows, not every target will prefer that pattern.
Out of 4 targets for which i added tests all seem to be ok with inc-of-add for scalars,
but only X86 prefer that same pattern for vectors.
Here i'm adding a new TLI hook, always defaulting to the inc-of-add,
but adding AArch64,ARM,PowerPC overrides to prefer inc-of-add only for scalars.
Reviewers: spatel, RKSimon, efriedma, t.p.northover, hfinkel
Reviewed By: efriedma
Subscribers: nemanjai, javed.absar, kristof.beyls, kbarton, jsji, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D64090
llvm-svn: 365010
After implemented this hook, we will model the memory dependency in the scheduling dependency graph more precise,
and will have more opportunity to reorder the load/stores, as they didn't have the dependency at some condition
Differential Revision: https://reviews.llvm.org/D63804
llvm-svn: 364886
FeatureFusion bits was first introduced in
https://reviews.llvm.org/rL253724. for add/load integer fusion for P8.
The only use of `hasFusion` was https://reviews.llvm.org/rL255319.
However, this was removed later in https://reviews.llvm.org/rL280440.
So, there is NO any reference to fusion in code now.
Leaving it there is misleading and confusing, so remove it for now.
We can alwasy add back if we ever support fusion in the future.
llvm-svn: 364581
This was reported in https://bugs.llvm.org/show_bug.cgi?id=41751
llvm-mc aborted when disassembling tabortdc.
This patch try to clean up TM related DAGs.
* Fixes the problem by remove explicit output of cr0, and put it as implicit def.
* Update int_ppc_tbegin pattern to accommodate the implicit def of cr0.
* Update the TCHECK operand and int_ppc_tcheck accordingly.
* Add some builtin test and disassembly tests.
* Remove unused CRRC0/crrc0
Differential Revision: https://reviews.llvm.org/D61935
llvm-svn: 364544
PPCMIPeephole::emitRLDICWhenLoweringJumpTables should return a bool
value to indicate optimization is conducted or not.
Differential Revision: https://reviews.llvm.org/D63801
llvm-svn: 364383
This was just an omission in the back end. We have had the instructions for both
single and double precision for a few HW generations, but never got around to
legalizing these.
Differential revision: https://reviews.llvm.org/D63634
llvm-svn: 364373
Summary:
In Secure PLT ABI, -fpic is similar to -fPIC. The differences are that:
* -fpic stores the address of _GLOBAL_OFFSET_TABLE_ in r30, while -fPIC stores .got2+0x8000.
* -fpic uses an addend of 0 for R_PPC_PLTREL24, while -fPIC uses 0x8000.
Reviewers: hfinkel, jhibbits, joerg, nemanjai, spetrovic
Reviewed By: jhibbits
Subscribers: adalava, kbarton, jsji, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D63563
llvm-svn: 364324
Avoids using a plain unsigned for registers throughoug codegen.
Doesn't attempt to change every register use, just something a little
more than the set needed to build after changing the return type of
MachineOperand::getReg().
llvm-svn: 364191
After r248261, the indentation switches, inside a namespace definition,
between indenting and not indenting one level in for that namespace; the
abomination occurs in the middle of a class definition. Fix that.
llvm-svn: 364133
Summary:
SPE passes doubles the same as soft-float, in register pairs as i32
types. This is all handled by the target-independent layer. However,
this is not optimal when splitting or reforming the doubles, as it
pushes to the stack and loads from, on either side.
For instance, to pass a double argument to a function, assuming the
double value is in r5, the sequence currently looks like this:
evstdd 5, X(1)
lwz 3, X(1)
lwz 4, X+4(1)
Likewise, to form a double into r5 from args in r3 and r4:
stw 3, X(1)
stw 4, X+4(1)
evldd 5, X(1)
This optimizes the fence to use SPE instructions. Now, to pass a double
to a function:
mr 4, 5
evmergehi 3, 5, 5
And to form a double into r5 from args in r3 and r4:
evmergelo 5, 3, 4
This is comparable to the way that gcc generates the double splits.
This also fixes a bug with expanding builtins to libcalls, where the
LowerCallTo() code path was generating intermediate illegal type nodes.
Reviewers: nemanjai, hfinkel, joerg
Subscribers: kbarton, jfb, jsji, llvm-commits
Differential Revision: https://reviews.llvm.org/D54583
llvm-svn: 363526
Summary:
If the nested loop is an innermost loop, prefer to a 32-byte alignment, so that
we can decrease cache misses and branch-prediction misses. Actual alignment of
the loop will depend on the hotness check and other logic in alignBlocks.
The old code will only align hot loop to 32 bytes when the LoopSize larger than
16 bytes and smaller than 32 bytes, this patch will align the innermost hot loop
to 32 bytes not only for the hot loop whose size is 16~32 bytes.
Reviewed By: steven.zhang, jsji
Differential Revision: https://reviews.llvm.org/D61228
llvm-svn: 363495
As discussed on D62910, we need to check whether particular types of memory access are allowed, not just their alignment/address-space.
This NFC patch adds a MachineMemOperand::Flags argument to allowsMemoryAccess and allowsMisalignedMemoryAccesses, and wires up calls to pass the relevant flags to them.
If people are happy with this approach I can then update X86TargetLowering::allowsMisalignedMemoryAccesses to handle misaligned NT load/stores.
Differential Revision: https://reviews.llvm.org/D63075
llvm-svn: 363179
Implement necessary target hooks to enable MachinePipeliner for P9 only.
The pass is off by default, can be enabled with -ppc-enable-pipeliner for P9.
Differential Revision: https://reviews.llvm.org/D62164
llvm-svn: 363085
This reverts r362990 (git commit 374571301d)
This was causing linker warnings on Darwin:
ld: warning: direct access in function 'llvm::initializeEvexToVexInstPassPass(llvm::PassRegistry&)'
from file '../../lib/libLLVMX86CodeGen.a(X86EvexToVex.cpp.o)' to global weak symbol
'void std::__1::__call_once_proxy<std::__1::tuple<void* (&)(llvm::PassRegistry&),
std::__1::reference_wrapper<llvm::PassRegistry>&&> >(void*)' from file '../../lib/libLLVMCore.a(Verifier.cpp.o)'
means the weak symbol cannot be overridden at runtime. This was likely caused by different translation
units being compiled with different visibility settings.
llvm-svn: 363028
Summary:
For builds with LLVM_BUILD_LLVM_DYLIB=ON and BUILD_SHARED_LIBS=OFF
this change makes all symbols in the target specific libraries hidden
by default.
A new macro called LLVM_EXTERNAL_VISIBILITY has been added to mark symbols in these
libraries public, which is mainly needed for the definitions of the
LLVMInitialize* functions.
This patch reduces the number of public symbols in libLLVM.so by about
25%. This should improve load times for the dynamic library and also
make abi checker tools, like abidiff require less memory when analyzing
libLLVM.so
One side-effect of this change is that for builds with
LLVM_BUILD_LLVM_DYLIB=ON and LLVM_LINK_LLVM_DYLIB=ON some unittests that
access symbols that are no longer public will need to be statically linked.
Before and after public symbol counts (using gcc 8.2.1, ld.bfd 2.31.1):
nm before/libLLVM-9svn.so | grep ' [A-Zuvw] ' | wc -l
36221
nm after/libLLVM-9svn.so | grep ' [A-Zuvw] ' | wc -l
26278
Reviewers: chandlerc, beanz, mgorny, rnk, hans
Reviewed By: rnk, hans
Subscribers: Jim, hiraditya, michaelplatings, chapuni, jholewinski, arsenm, dschuff, jyknight, dylanmckay, sdardis, nemanjai, jvesely, nhaehnle, javed.absar, sbc100, jgravelle-google, aheejin, kbarton, fedor.sergeev, asb, rbar, johnrusso, simoncook, apazos, sabuasal, niosHD, jrtc27, zzheng, edward-jones, mgrang, atanasyan, rogfer01, MartinMosbeck, brucehoult, the_o, PkmX, jocewei, kristina, jsji, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D54439
llvm-svn: 362990
This was found during HTM cleanup.
Adding a test for builtin_ttest would expose following issue.
*** Bad machine code: Illegal physical register for instruction ***
- function: test10
- basic block: %bb.0 entry (0xf0e57497b58)
- instruction: %5:crrc0 = TABORTWCI 0, $zero, 0
- operand 2: $zero
$zero is not a GPRC register.
LLVM ERROR: Found 1 machine code errors.
Differential Revision: https://reviews.llvm.org/D63079
llvm-svn: 362974
Patch which introduces a target-independent framework for generating
hardware loops at the IR level. Most of the code has been taken from
PowerPC CTRLoops and PowerPC has been ported over to use this generic
pass. The target dependent parts have been moved into
TargetTransformInfo, via isHardwareLoopProfitable, with
HardwareLoopInfo introduced to transfer information from the backend.
Three generic intrinsics have been introduced:
- void @llvm.set_loop_iterations
Takes as a single operand, the number of iterations to be executed.
- i1 @llvm.loop_decrement(anyint)
Takes the maximum number of elements processed in an iteration of
the loop body and subtracts this from the total count. Returns
false when the loop should exit.
- anyint @llvm.loop_decrement_reg(anyint, anyint)
Takes the number of elements remaining to be processed as well as
the maximum numbe of elements processed in an iteration of the loop
body. Returns the updated number of elements remaining.
llvm-svn: 362774
Use the PPC vector min/max instructions for computing the corresponding
operation as these should be faster than the compare/select sequences
we currently emit.
Differential revision: https://reviews.llvm.org/D47332
llvm-svn: 362759
Summary:
(1) Function descriptor on AIX
On AIX, a called routine may have 2 distinct symbols associated with it:
* A function descriptor (Name)
* A function entry point (.Name)
The descriptor structure on AIX is the same as those in the ELF V1 ABI:
* The address of the entry point of the function.
* The TOC base address for the function.
* The environment pointer.
The descriptor symbol uses the same name as the source level function in C.
The function entry point is analogous to the symbol we would generate for a
function in a non-descriptor-based ABI, except that it is renamed by
prepending a ".".
Which symbol gets referenced depends on the context:
* Taking the address of the function references the descriptor symbol.
* Calling the function references the entry point symbol.
(2) Speaking of implementation on AIX, for direct function call target, we
create proper MCSymbol SDNode(e.g . ".foo") while constructing SDAG to
replace original TargetGlobalAddress SDNode. Then down the path, we can
take advantage of this MCSymbol.
Patch by: Xiangling_L
Reviewed by: sfertile, hubert.reinterpretcast, jasonliu, syzaara
Differential Revision: https://reviews.llvm.org/D62532
llvm-svn: 362735
Summary:
This patch implements SDAG call lowering on AIX for functions
which only have parameters that could fit into GPRs.
Reviewers: hubert.reinterpretcast, syzaara
Differential Revision: https://reviews.llvm.org/D62823
llvm-svn: 362708
Generally speaking, we lower to an optimal rotate sequence for nodes visible in
the SDAG. However, there are instances where the two rotates are not visible at
ISEL time - most notably those in a very common sequence when lowering switch
statements to jump tables.
A common situation is a switch on a 32-bit integer. This value has to have the
upper 32 bits cleared and because jump table offsets are word offsets, the value
needs to be shifted left by 2 bits. We currently emit the clear and the left
shift as two separate instructions, but this is not needed as we can lower it to
a single RLDIC.
This patch just cleans that up.
Differential revision: https://reviews.llvm.org/D60402
llvm-svn: 362576
This is to address some of the problems in existing P9 resource modeling,
especially about the dispatching rules.
Instead of using a hypothetical DISPATCHER , we try to use the number of
actual dispatch slots, and define SchedWriteRes to model dispatch rules,
then update instruction classes according to dispatch rules.
All the dispatch rules and instruction classes update are made according
to POWER9 User Manual.
Differential Revision: https://reviews.llvm.org/D61873
llvm-svn: 362509
We currently miss the opportunities for optmizing comparisons in the peephole
optimizer if the input is the result of a COPY since we look for record-form
versions of the producing instruction.
This patch simply lets the optimization peek through copies.
Differential revision: https://reviews.llvm.org/D59633
llvm-svn: 362438
Summary:
It looks like since INLINEASM_BR was created off of INLINEASM (r353563),
a few checks for INLINEASM needed to be updated to check for either
case.
pr/41999
Reviewers: hfinkel
Reviewed By: hfinkel
Subscribers: nemanjai, hiraditya, kbarton, jsji, llvm-commits, craig.topper, srhines
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D62403
llvm-svn: 362278
In PPCReduceCRLogicals after splitting the original MBB into 2, the 2 impacted branches still use original branch probability. This is unreasonable. Suppose we have following code, and the probability of each successor is 50%.
condc = conda || condb
br condc, label %target, label %fallthrough
It can be transformed to following,
br conda, label %target, label %newbb
newbb:
br condb, label %target, label %fallthrough
Since each branch has a probability of 50% to each successor, the total probability to %fallthrough is 25% now, and the total probability to %target is 75%. This actually changed the original profiling data. A more reasonable probability can be set to 70% to the false side for each branch instruction, so the total probability to %fallthrough is close to 50%.
This patch assumes the branch target with two incoming edges have same edge frequency and computes new probability fore each target, and keep the total probability to original targets unchanged.
Differential Revision: https://reviews.llvm.org/D62430
llvm-svn: 362237
Summary:dd
This patch implements call lowering for calls without parameters
on AIX as initial support.
Reviewers: sfertile, hubert.reinterpretcast, aheejin, efriedma
Differential Revision: https://reviews.llvm.org/D61948
llvm-svn: 361669
For the situation, where we generate the following code:
crxor 8, 8, 8
< Some instructions>
.LBB0_1:
< Some instructions>
cror 1, 8, 8
cror (COPY of CRbit) depends on the result of the crxor instruction.
CR8 is known to be zero as crxor is equivalent to CRUNSET. We can simply use
crxor 1, 1, 1 instead to zero out CR1, which does not have any dependency on
any previous instruction.
This patch will optimize it to:
< Some instructions>
.LBB0_1:
< Some instructions>
cror 1, 1, 1
Patch By: Victor Huang (NeHuang)
Differential Revision: https://reviews.llvm.org/D62044
llvm-svn: 361632
When we are scheduling the load and addi, if all other heuristic didn't take effect,
we will try to schedule the addi before the load, to hide the latency, and avoid the
true dependency added by RA. And this only take effects for Power9.
Differential Revision: https://reviews.llvm.org/D61930
llvm-svn: 361600
When the tiny code model is requested for a target machine that does not
support this, we get an error message (which is nice) but also this diagnostic
and request to submit a bug report:
fatal error: error in backend: Target does not support the tiny CodeModel
[Inferior 2 (process 31509) exited with code 0106]
clang-9: error: clang frontend command failed with exit code 70 (use -v to see invocation)
(gdb) clang version 9.0.0 (http://llvm.org/git/clang.git 29994b0c63a40f9c97c664170244a7bba5ecc15e) (http://llvm.org/git/llvm.git 95606fdf91c2d63a931e865f4b78b2e9828ddc74)
Target: arm-arm-none-eabi
Thread model: posix
clang-9: note: diagnostic msg: PLEASE submit a bug report to https://bugs.llvm.org/ and include the crash backtrace, preprocessed source, and associated run script.
clang-9: note: diagnostic msg:
********************
PLEASE ATTACH THE FOLLOWING FILES TO THE BUG REPORT:
Preprocessed source(s) and associated run script(s) are located at:
clang-9: note: diagnostic msg: /tmp/tiny-dfe1a2.c
clang-9: note: diagnostic msg: /tmp/tiny-dfe1a2.sh
clang-9: note: diagnostic msg:
But this is not a bug, this is a feature. :-) Not only is this not a bug, this
is also pretty confusing. This patch causes just to print the fatal error and
not the diagnostic:
fatal error: error in backend: Target does not support the tiny CodeModel
Differential Revision: https://reviews.llvm.org/D62236
llvm-svn: 361370
Summary:
For big-endian powerpc64, the default ABI is ELFv1. OpenPower ABI ELFv2 is supported when -mabi=elfv2 is specified. FreeBSD support for PowerPC64 ELFv2 ABI with LLVM is in progress[1]. This patch adds an alternative way to specify ELFv2 ABI on target triple [2].
The following results are expected:
ELFv1 when using:
-target powerpc64-unknown-freebsd12.0
-target powerpc64-unknown-freebsd12.0 -mabi=elfv1
-target powerpc64-unknown-freebsd12.0-elfv1
ELFv2 when using:
-target powerpc64-unknown-freebsd12.0 -mabi=elfv2
-target powerpc64-unknown-freebsd12.0-elfv2
[1] https://wiki.freebsd.org/powerpc/llvm-elfv2
[2] https://clang.llvm.org/docs/CrossCompilation.html
Patch by Alfredo Dal'Ava Júnior!
Differential Revision: https://reviews.llvm.org/D61950
llvm-svn: 361355
On PowerPC64 ELFv2 ABI, functions may have 2 entry points: global and local.
The local entry point location of a function is stored in the st_other field of the symbol, as an offset relative to the global entry point.
In order to make symbol assignments (e.g. .equ/.set) work properly with this, PPCTargetELFStreamer already copies the local entry bits from the source symbol to the destination one, on emitAssignment(). The problem is that this copy is performed only at the assignment location, where the source symbol may not yet have processed the .localentry directive, that sets the local entry. This may cause the destination symbol to end up with wrong local entry information. Other symbol info is not affected by this because, in this case, the destination symbol value is actually a symbol reference.
This change keeps track of these assignments, and update all needed st_other fields when finish() is called.
Patch by Leandro Lupori!
Reviewed By: MaskRay
Differential Revision: https://reviews.llvm.org/D56586
llvm-svn: 361237
This can be used to create references among sections. When --gc-sections
is used, the referenced section will be retained if the origin section
is retained.
llvm-svn: 360990
Replace the member variable Target with Triple
Use Triple instead of TheTarget.getName() to dispatch on 32-bit/64-bit.
Delete redundant parameters
llvm-svn: 360986
Move the declarations of getThe<Name>Target() functions into a new header in
TargetInfo and make users of these functions include this new header.
This fixes a layering problem.
llvm-svn: 360731
For known CRBit spills, CRSET/CRUNSET, it is more efficient to load and spill
the known value instead of extracting the bit.
eg. This sequence is currently used to spill a CRUNSET:
crclr 4*cr5+lt
mfocrf r3,4
rlwinm r3,r3,20,0,0
stw r3,132(r1)
This patch custom lower it to:
li r3,0
stw r3,132(r1)
Differential Revision: https://reviews.llvm.org/D61754
llvm-svn: 360677
For some targets, there is a circular dependency between InstPrinter and
MCTargetDesc. Merging them together will fix this. For the other targets,
the merging is to maintain consistency so all targets will have the same
structure.
llvm-svn: 360502
Summary:
Preserve MemorySSA in LoopSimplify, in the old pass manager, if the analysis is available.
Do not preserve it in the new pass manager.
Update tests.
Subscribers: nemanjai, jlebar, javed.absar, Prazek, kbarton, zzheng, jsji, llvm-commits, george.burgess.iv, chandlerc
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D60833
llvm-svn: 360270
The single-constant algorithm produces infinities on a lot of denormal values.
The precision of the two-constant algorithm is actually sufficient across the
range of denormals. We will switch to that algorithm for now to avoid the
infinities on denormals. In the future, we will re-evaluate the algorithm to
find the optimal one for PowerPC.
Differential revision: https://reviews.llvm.org/D60037
llvm-svn: 360144
A condition for exiting the legalization of v4i32 conversion to v2f64 through
extract/convert/build erroneously checks for the extract having type i32.
This is not adequate as smaller extracts are actually legalized to i32 as well.
Furthermore, an early exit is missing which means that we only check that
both extracts are from the same vector if that check fails.
As a result, both cases in the included test case fail - the first gets a
select error and the second generates incorrect code.
The culprit commit is r274535.
llvm-svn: 360043
Summary:
Based on the Eli Friedman's comments in https://reviews.llvm.org/D60811 , we'd better return early if the element type is not byte-sized in `combineBVOfConsecutiveLoads`.
Reviewed By: efriedma
Differential Revision: https://reviews.llvm.org/D61076
llvm-svn: 359764
The MachineFunction wasn't used in getOptimalMemOpType, but more importantly,
this allows reuse of findOptimalMemOpLowering that is calling getOptimalMemOpType.
This is the groundwork for the changes in D59766 and D59787, that allows
implementation of TTI::getMemcpyCost.
Differential Revision: https://reviews.llvm.org/D59785
llvm-svn: 359537
Change the PPCISelLowering.cpp function that decides to avoid update form in
favor of partial vector loads to know about newer load types and to not be
confused by the chain operand.
Differential Revision: https://reviews.llvm.org/D60102
llvm-svn: 359504
Summary:
Targets like ARM, MSP430, PPC, and SystemZ have complex behavior when
printing the address of a MachineOperand::MO_GlobalAddress. Move that
handling into a new overriden method in each base class. A virtual
method was added to the base class for handling the generic case.
Refactors a few subclasses to support the target independent %a, %c, and
%n.
The patch also contains small cleanups for AVRAsmPrinter and
SystemZAsmPrinter.
It seems that NVPTXTargetLowering is possibly missing some logic to
transform GlobalAddressSDNodes for
TargetLowering::LowerAsmOperandForConstraint to handle with "i" extended
inline assembly asm constraints.
Fixes:
- https://bugs.llvm.org/show_bug.cgi?id=41402
- https://github.com/ClangBuiltLinux/linux/issues/449
Reviewers: echristo, void
Reviewed By: void
Subscribers: void, craig.topper, jholewinski, dschuff, jyknight, dylanmckay, sdardis, nemanjai, javed.absar, sbc100, jgravelle-google, eraman, kristof.beyls, hiraditya, aheejin, kbarton, fedor.sergeev, jrtc27, atanasyan, jsji, llvm-commits, kees, tpimh, nathanchance, peter.smith, srhines
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D60887
llvm-svn: 359337
The PPC vector cost model values for insert/extract element reflect older
processors that lacked vector insert/extract and move-to/move-from VSR
instructions. Update getVectorInstrCost to give appropriate values for when
the newer instructions are present.
Differential Revision: https://reviews.llvm.org/D60160
llvm-svn: 359313
Using initial-exec TLS variables is a reasonable performance
optimisation for system libraries. Use the correct PIC mechanism to get
hold of the GOT to avoid text relocations.
Differential Revision: https://reviews.llvm.org/D61026
llvm-svn: 359146
Summary:
This issue from the bugzilla: https://bugs.llvm.org/show_bug.cgi?id=41177
When the two operands for BUILD_VECTOR are same, we will get assert error.
llvm::SDValue combineBVOfConsecutiveLoads(llvm::SDNode*, llvm::SelectionDAG&):
Assertion `!(InputsAreConsecutiveLoads && InputsAreReverseConsecutive) &&
"The loads cannot be both consecutive and reverse consecutive."' failed.
This error caused by the wrong ElemSIze when calling isConsecutiveLS(). We
should use `getScalarType().getStoreSize();` to get the ElemSize instread of
`getScalarSizeInBits() / 8`.
Reviewed By: jsji
Differential Revision: https://reviews.llvm.org/D60811
llvm-svn: 358644
Summary:
None of these derived classes do anything that the base class cannot.
If we remove these case statements, then the base class can handle them
just fine.
Reviewers: peter.smith, echristo
Reviewed By: echristo
Subscribers: nemanjai, javed.absar, eraman, kristof.beyls, hiraditya, kbarton, jsji, llvm-commits, srhines
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D60803
llvm-svn: 358603
Summary:
Some llc debug options need pass-name as the parameters.
But if we use the pass-name ppc-early-ret, we will get below error:
llc test.ll -stop-after ppc-early-ret
LLVM ERROR: "ppc-early-ret" pass is not registered.
Below pass-names have the pass is not registered error:
ppc-ctr-loops
ppc-ctr-loops-verify
ppc-loop-preinc-prep
ppc-toc-reg-deps
ppc-vsx-copy
ppc-early-ret
ppc-vsx-fma-mutate
ppc-vsx-swaps
ppc-reduce-cr-ops
ppc-qpx-load-splat
ppc-branch-coalescing
ppc-branch-select
Reviewed By: jsji
Differential Revision: https://reviews.llvm.org/D60248
llvm-svn: 358271
Summary:
Some llc debug options need pass-name as the parameters.
But if we use the pass-name ppc-early-ret, we will get below error:
llc test.ll -stop-after ppc-early-ret
LLVM ERROR: "ppc-early-ret" pass is not registered.
Below pass-names have the pass is not registered error:
ppc-ctr-loops
ppc-ctr-loops-verify
ppc-loop-preinc-prep
ppc-toc-reg-deps
ppc-vsx-copy
ppc-early-ret
ppc-vsx-fma-mutate
ppc-vsx-swaps
ppc-reduce-cr-ops
ppc-qpx-load-splat
ppc-branch-coalescing
ppc-branch-select
Reviewed By: jsji
Differential Revision: https://reviews.llvm.org/D60248
llvm-svn: 358256
There are 3 operands of maddld, (add (mul %1, %2), %3) and sometimes
they are constant. If there is constant operand, it takes extra li to
materialize the operand, and one more extra register too. So it's not
profitable to use maddld to optimize mul-add pattern.
Differential Revision: https://reviews.llvm.org/D60181
llvm-svn: 358253
Summary:
The InlineAsm::AsmDialect is only required for X86; no architecture
makes use of it and as such it gets passed around between arch-specific
and general code while being unused for all architectures but X86.
Since the AsmDialect is queried from a MachineInstr, which we also pass
around, remove the additional AsmDialect parameter and query for it deep
in the X86AsmPrinter only when needed/as late as possible.
This refactor should help later planned refactors to AsmPrinter, as this
difference in the X86AsmPrinter makes it harder to make AsmPrinter more
generic.
Reviewers: craig.topper
Subscribers: jholewinski, arsenm, dschuff, jyknight, dylanmckay, sdardis, nemanjai, jvesely, nhaehnle, javed.absar, sbc100, jgravelle-google, eraman, hiraditya, aheejin, kbarton, fedor.sergeev, asb, rbar, johnrusso, simoncook, apazos, sabuasal, niosHD, jrtc27, zzheng, edward-jones, atanasyan, rogfer01, MartinMosbeck, brucehoult, the_o, PkmX, jocewei, jsji, llvm-commits, peter.smith, srhines
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D60488
llvm-svn: 358101
Did experiments on power 9 machine, checked the outputs for NaN & Infinity+
cases with corresponding DCMX bit set. Confirmed the DCMX mask bit for NaN and
infinity+ are reversed.
This patch fixes the issue.
Patch by Victor Huang.
Differential Revision: https://reviews.llvm.org/D59384
llvm-svn: 357494
Summary:
PowerPC64/PowerPC64le supports the builtin function __builtin_setrnd to set the floating point rounding mode. This function will use the least significant two bits of integer argument to set the floating point rounding mode.
double __builtin_setrnd(int mode);
The effective values for mode are:
0 - round to nearest
1 - round to zero
2 - round to +infinity
3 - round to -infinity
Note that the mode argument will modulo 4, so if the int argument is greater than 3, it will only use the least significant two bits of the mode. Namely, builtin_setrnd(102)) is equal to builtin_setrnd(2).
Reviewed By: jsji
Differential Revision: https://reviews.llvm.org/D59405
llvm-svn: 357241
A shift and add/sub sequence combination is faster in place of a multiply by constant.
Because the cycle or latency of multiply is not huge, we only consider such following
worthy patterns.
```
(mul x, 2^N + 1) => (add (shl x, N), x)
(mul x, -(2^N + 1)) => -(add (shl x, N), x)
(mul x, 2^N - 1) => (sub (shl x, N), x)
(mul x, -(2^N - 1)) => (sub x, (shl x, N))
```
And the cycles or latency is subtarget-dependent so that we need consider the
subtarget to determine to do or not do such transformation.
Also data type is considered for different cycles or latency to do multiply.
Differential Revision: https://reviews.llvm.org/D58950
llvm-svn: 357233
This patch lays the groundwork for extending the generic machine scheduler by providing a PPC-specific implementation.
There are no functional changes as this is an incremental patch that simply provides the necessary overrides which just
encapsulate the behavior of the generic scheduler. Subsequent patches will add specific behavior.
Differential Revision: https://reviews.llvm.org/D59284
llvm-svn: 357047
This patch splits the huge function PPCBranchSelector.cpp:runOnMachineFunction into several smaller functions.
No functional change.
Differential Revision: https://reviews.llvm.org/D59623
llvm-svn: 357033
The UseVSXReg flag can be safely removed and the code cleaned up.
Patch By: Yi-Hong Liu
Differential Revision: https://reviews.llvm.org/D58685
llvm-svn: 357028
These changes are related to PR37743 and include:
SelectionDAGBuilder::visitSelect handles the unary SelectPatternFlavor::SPF_ABS case to build ABS node.
Delete the redundant recognizer of the integer ABS pattern from the DAGCombiner.
Add promoting the integer ABS node in the LegalizeIntegerType.
Expand-based legalization of integer result for the ABS nodes.
Expand-based legalization of ABS vector operations.
Add some integer abs testcases for different typesizes for Thumb arch
Add the custom ABS expanding and change the SAD pattern recognizer for X86 arch: The i64 result of the ABS is expanded to:
tmp = (SRA, Hi, 31)
Lo = (UADDO tmp, Lo)
Hi = (XOR tmp, (ADDCARRY tmp, hi, Lo:1))
Lo = (XOR tmp, Lo)
The "detectZextAbsDiff" function is changed for the recognition of pattern with the ABS node. Given a ABS node, detect the following pattern:
(ABS (SUB (ZERO_EXTEND a), (ZERO_EXTEND b))).
Change integer abs testcases for codegen with the ABS node support for AArch64.
Indicate that the ABS is legal for the i64 type when the NEON is supported.
Change the integer abs testcases to show changing of codegen.
Add combine and legalization of ABS nodes for Thumb arch.
Extend 'matchSelectPattern' to recognize the ABS patterns with ICMP_SGE condition.
For discussion, see https://bugs.llvm.org/show_bug.cgi?id=37743
Patch by: @ikulagin (Ivan Kulagin)
Differential Revision: https://reviews.llvm.org/D49837
llvm-svn: 356468
This allows better code size for aarch64 floating point materialization
in a future patch.
Reviewers: evandro
Differential Revision: https://reviews.llvm.org/D58690
llvm-svn: 356389
Vector imm setting instructions like XXLXORz/XXLXORspz/XXLXORdpz
Should behave like LI8.
We should set corresponding flags to allow rematerialization and other
opts in LICM, RA, Scheduling etc.
Differential Revision: https://reviews.llvm.org/D58645
llvm-svn: 355948
This was found when we generated COPY from G8RC to F8RC in
EmitInstrWithCustomInserter without checking proper architecture,
we silently generated mtvsrd, which require P8 and up.
This is a NFC patch to add assert when we call copyPhysReg, in case
someone accidentally generate COPY between G8RC to F8RC for P7 and
below.
llvm-svn: 355920
AMDGPU target run out of Subtarget feature flags hitting the limit of 64.
AssemblerPredicates uses at most uint64_t for their representation.
At the same time CodeGen has exhausted this a long time ago and switched
to a FeatureBitset with the current limit of 192 bits.
This patch completes transition to the bitset for feature bits extending
it to asm matcher and MC code emitter.
Differential Revision: https://reviews.llvm.org/D59002
llvm-svn: 355839
After fix all asserts found by machine verifier in PowerPC target with following patches,
we can activate machine verifier as default.
rL293769, rL348566, rL349030, rL349029, rL350113, rL350111,
rL350799, rL350165, rL355378, rL352174, rL354762, rL350115
It's also found in PR#27456, https://bugs.llvm.org/show_bug.cgi?id=27456
Differential Revision: https://reviews.llvm.org/D59011
llvm-svn: 355798
In file PPCBranchSelector.cpp we tend to over estimate code size due to large
alignment and inline assembly. Usually it causes larger computed branch offset,
it is not big problem. But sometimes it may also causes smaller computed branch
offset than actual branch offset. If the offset is close to the limit of
encoding, it may cause problem at run time.
Following is a simplified example.
actual estimated
address address
...
bne Far 100 10c
.p2align 4
Near: 110 110
...
Far: 8108 8108
Actual offset: 0x8108 - 0x100 = 0x8008
Computed offset: 0x8108 - 0x10c = 0x7ffc
The computed offset is at most ((1 << alignment) - 4) bytes smaller than actual
offset. So we add this number to the offset for safety.
Differential Revision: https://reviews.llvm.org/D57718
llvm-svn: 355529
Move the stdu instruction in the prologue and epilogue.
This should provide a small performance boost in functions that are able to do
this. I've kept this change rather conservative at the moment and functions
with frame pointers or base pointers will not try to move the stack pointer
update.
Differential Revision: https://reviews.llvm.org/D42590
llvm-svn: 355085
Summary:
Fast selection of llvm fptoi & fptrunc instructions is not handled well about
VSX instruction support.
We'd use VSX float convert integer instruction instead of non-vsx float convert
integer instruction if the operand register class is VSSRC or VSFRC because i32
and i64 are mapped to VSSRC and VSFRC correspondingly if VSX feature is
openeded.
For float trunc instruction, we do this silimar work like float convert integer
instruction to try to use VSX instruction.
Reviewed By: jsji
Differential Revision: https://reviews.llvm.org/D58430
llvm-svn: 354762
Fix the undefined behaviour introduced by my previous patch r353865 (left
shifting a potentially negative value), which was caught by the bots that run
UBSan.
llvm-svn: 353874
The PowerPC code generator currently scalarizes vector truncates that would fit in a vector register, resulting in vector extracts, scalar operations, and vector merges. This patch custom lowers a vector truncate that would fit in a register to a vector shuffle instead.
Differential Revision: https://reviews.llvm.org/D56507
llvm-svn: 353724
This patch accompanies the RFC posted here:
http://lists.llvm.org/pipermail/llvm-dev/2018-October/127239.html
This patch adds a new CallBr IR instruction to support asm-goto
inline assembly like gcc as used by the linux kernel. This
instruction is both a call instruction and a terminator
instruction with multiple successors. Only inline assembly
usage is supported today.
This also adds a new INLINEASM_BR opcode to SelectionDAG and
MachineIR to represent an INLINEASM block that is also
considered a terminator instruction.
There will likely be more bug fixes and optimizations to follow
this, but we felt it had reached a point where we would like to
switch to an incremental development model.
Patch by Craig Topper, Alexander Ivchenko, Mikhail Dvoretckii
Differential Revision: https://reviews.llvm.org/D53765
llvm-svn: 353563
This cleans up all CallInst creation in LLVM to explicitly pass a
function type rather than deriving it from the pointer's element-type.
Differential Revision: https://reviews.llvm.org/D57170
llvm-svn: 352909
Make copy register code as common function as following.
unsigned copyRegToRegClass(const TargetRegisterClass *ToRC, unsigned SrcReg, unsigned Flag = 0, unsigned SubReg = 0);
Differential Revision: https://reviews.llvm.org/D57368
llvm-svn: 352596
Move the CC analysis implementation to its own .cpp file instead of
duplicating it and artificually using functions in PPCISelLowering.cpp
and PPCFastISel.cpp. Follow-up to the same change done for X86, ARM, and
AArch64.
llvm-svn: 352444
For the power9 CPU, vector operations consume a pair of execution units rather
than one execution unit like a scalar operation. Update the target transform
cost functions to reflect the higher cost of vector operations when targeting
Power9.
Patch by RolandF.
Differential revision: https://reviews.llvm.org/D55461
llvm-svn: 352261
Fast selection of llvm icmp and fcmp instructions is not handled well about VSX instruction support.
We'd use VSX float comparison instruction instead of non-vsx float comparison instruction
if the operand register class is VSSRC or VSFRC because i32 and i64 are mapped to VSSRC and
VSFRC correspondingly if VSX feature is opened.
If the target does not have corresponding VSX instruction comparison for some type,
just copy VSX-related register to common float register class and use non-vsx comparison instruction.
Differential Revision: https://reviews.llvm.org/D57078
llvm-svn: 352174
This patch exploits the instructions that store a single element from a vector
to preform a (store (extract_elt)). We already have code that does this with
ISA 3.0 instructions that were added to handle i8/i16 types. However, we had
never exploited the existing ones that handle f32/f64/i32/i64 types.
Differential revision: https://reviews.llvm.org/D56175
llvm-svn: 352131
to reflect the new license.
We understand that people may be surprised that we're moving the header
entirely to discuss the new license. We checked this carefully with the
Foundation's lawyer and we believe this is the correct approach.
Essentially, all code in the project is now made available by the LLVM
project under our new license, so you will see that the license headers
include that license only. Some of our contributors have contributed
code under our old license, and accordingly, we have retained a copy of
our old license notice in the top-level files in each project and
repository.
llvm-svn: 351636
Bad machine code: Illegal virtual register for instruction
function: TestULE
basic block: %bb.0 entry (0x1000a39b158)
instruction: %2:crrc = FCMPUD %1:vsfrc, %3:f8rc
operand 1: %1:vsfrc
Fix assert about missing match between fcmp instruction and register class.
We should use vsx related cmp instruction xvcmpudp instead of fcmpu when vsx is opened.
add -verifymachineinstrs option into related test cases to enable the verify pass.
Differential Revision: https://reviews.llvm.org/D55686
llvm-svn: 350685
When switched to the MI scheduler for P9, the hardware is modeled as out of order.
However, inside the MI Scheduler algorithm, we still use the in-order scheduling model
as the MicroOpBufferSize isn't set. The MI scheduler take it as the hw cannot buffer
the op. So, only when all the available instructions issued, the pending instruction
could be scheduled. That is not true for our P9 hw in fact.
This patch is trying to enable the Out-of-Order scheduling model. The buffer size 44 is
picked from the P9 hw spec, and the perf test indicate that, its value won't hurt the cpu2017.
With this patch, there are 3 specs improved over 3% and 1 spec deg over 3%. The detail is as follows:
x264_r: +6.95%
cactuBSSN_r: +6.94%
lbm_r: +4.11%
xz_r: -3.85%
And the GEOMEAN for all the C/C++ spec in spec2017 is about 0.18% improved.
Reviewer: Nemanjai
Differential Revision: https://reviews.llvm.org/D55810
llvm-svn: 350285
PPCPreEmitPeephole pass.
PPCPreEmitPeephole will convert a BC to B when the conditional branch is
based on a constant CR by CRSET or CRUNSET. This is added in
https://reviews.llvm.org/rL343100.
When the conditional branch is known to be always taken, all branches will
be removed and a new unconditional branch will be inserted. However, when
SeenUse is false the original patch will not remove the branches, but still
insert the new unconditional branch, update the successors and create
inconsistent IR. Compiling the synthetic testcase included can show the
problem we run into.
The patch simply removes the SeenUse condition when adding branches into
InstrsToErase set.
Differential Revision: https://reviews.llvm.org/D56041
llvm-svn: 350223
Summary:
For SDAG, we pretend patchpoints aren't special at all until we emit the code for the pseudo.
Then the verifier runs and it seems like we have a use of an undefined register (the register will
be reserved later, but the verifier doesn't know that).
So this patch call setUsesTOCBasePtr before emit the code for the pseudo, so verifier can know
X2 is a reserved register.
Reviewed By: nemanjai
Differential Revision: https://reviews.llvm.org/D56148
llvm-svn: 350165
We have some unfortunate code in the back end that defines a bunch of register
sets for the Asm Parser. Every time another class is needed in the parser, we
have to add another one of those definitions with explicit lists of registers.
This NFC patch simply provides macros to use to condense that code a little bit.
Differential revision: https://reviews.llvm.org/D54433
llvm-svn: 350156
A recent patch has added custom legalization of vector conversions of
v2i16 -> v2f64. This just rounds it out for other types where the input vector
has an illegal (narrower) type than the result vector. Specifically, this will
handle the following conversions:
v2i8 -> v2f64
v4i8 -> v4f32
v4i16 -> v4f32
Differential revision: https://reviews.llvm.org/D54663
llvm-svn: 350155
The current CRBIT spill pseudo-op expansion creates a KILL instruction
that kills the CRBIT and defines the enclosing CR field. However, this
paints a false picture to the register allocator that all bits in the CR
field are killed so copies of other bits out of the field become dead and
removable.
This changes the expansion to preserve the KILL flag on the CRBIT as an
implicit use and to treat the CR field as an undef input.
Thanks to Hal Finkel for the review and Uli Weigand for implementation input.
Differential revision: https://reviews.llvm.org/D55996
llvm-svn: 350153
This is the last one in a series of patches to support better code generation for bitfield insert.
BitPermutationSelector already support ISD::ZERO_EXTEND but not TRUNCATE.
This patch adds support for ISD:TRUNCATE in BitPermutationSelector.
For example of this test case,
struct s64b {
int a:4;
int b:16;
int c:24;
};
void bitfieldinsert64b(struct s64b *p, unsigned char v) {
p->b = v;
}
the selection DAG loos like:
t14: i32,ch = load<(load 4 from %ir.0)> t0, t2, undef:i64
t18: i32 = and t14, Constant:i32<-1048561>
t4: i64,ch = CopyFromReg t0, Register:i64 %1
t22: i64 = AssertZext t4, ValueType:ch:i8
t23: i32 = truncate t22
t16: i32 = shl nuw nsw t23, Constant:i32<4>
t19: i32 = or t18, t16
t20: ch = store<(store 4 into %ir.0)> t14:1, t19, t2, undef:i64
By handling truncate in the BitPermutationSelector, we can use information from AssertZext when selecting t19 and skip the mask operation corresponding to t18.
So the generated sequences with and without this patch are
without this patch
rlwinm 5, 5, 0, 28, 11 # corresponding to t18
rlwimi 5, 4, 4, 20, 27
with this patch
rlwimi 5, 4, 4, 12, 27
Differential Revision: https://reviews.llvm.org/D49076
llvm-svn: 350118
If we are changing the MI operand from Reg to Imm, we need also handle its implicit use if have.
Differential Revision: https://reviews.llvm.org/D56078
llvm-svn: 350115
For atomic value operand which less than 4 bytes need to be masked.
And the related operation to calculate the newvalue can be done in 32 bit gprc.
So just use gprc for mask and value calculation.
Differential Revision: https://reviews.llvm.org/D56077
llvm-svn: 350113
Summary:
This patch is to fix the bug imported by rL341634.
In above submit , the the return type of ISD::ADDE is
14224: SDVTList VTs = DAG.getVTList(MVT::i64, MVT::i64),
but in fact, the second return type of ISD::ADDE should be
MVT::Glue not MVT::i64.
Reviewed By: hfinkel
Differential Revision: https://reviews.llvm.org/D55977
llvm-svn: 350061
Summary:
PowerPC has scalar selects (isel) and vector mask selects (xxsel). But PowerPC
does not have vector CR selects, PowerPC does not support scalar condition
selects on vectors.
In addition to implementing this hook, isSelectSupported() should return false
when the SelectSupportKind is ScalarCondVectorVal, so that predictable selects
are converted into branch sequences.
Reviewed By: steven.zhang, hfinkel
Differential Revision: https://reviews.llvm.org/D55754
llvm-svn: 349727
For type v4i32/v8ii16/v16i8, do following transforms:
(vselect (setcc a, b, setugt), (sub a, b), (sub b, a)) -> (vabsd a, b)
(vselect (setcc a, b, setuge), (sub a, b), (sub b, a)) -> (vabsd a, b)
(vselect (setcc a, b, setult), (sub b, a), (sub a, b)) -> (vabsd a, b)
(vselect (setcc a, b, setule), (sub b, a), (sub a, b)) -> (vabsd a, b)
Differential Revision: https://reviews.llvm.org/D55812
llvm-svn: 349599
Improve the current vec_abs support on P9, generate ISD::ABS node for vector types,
combine ABS node to VABSD node for some special cases to make use of P9 VABSD* insns,
do custom lowering to vsub(vneg later)+vmax if it has no combination opportunity.
Differential Revision: https://reviews.llvm.org/D54783
llvm-svn: 349437
We keep a few iterators into the basic block we're selecting while
performing FastISel. Usually this is fine, but occasionally code wants
to remove already-emitted instructions. When this happens we have to be
careful to update those iterators so they're not pointint at dangling
memory.
llvm-svn: 349365
There are several Pseudo in PowerPC backend.
eg:
* ISel Pseudo-instructions , which has let usesCustomInserter=1 in td
ExpandISelPseudos -> EmitInstrWithCustomInserter will deal with them.
* Post-RA pseudo instruction, which has let isPseudo = 1 in td, or Standard pseudo (SUBREG_TO_REG,COPY etc.)
ExpandPostRAPseudos -> expandPostRAPseudo will expand them
* Multi-instruction pseudo operations will expand them PPCAsmPrinter::EmitInstruction
* Pseudo instruction in CodeEmitter, which has encoding of 0.
Currently, in td files, especially PPCInstrVSX.td,
we did not distinguish Post-RA pseudo instruction and Pseudo instruction in CodeEmitter very clearly.
This patch is to
* Rename Pseudo<> class to PPCEmitTimePseudo, which means encoding of 0 in CodeEmitter
* Introduce new class PPCPostRAExpPseudo <> for previous PostRA Pseudo
* Introduce new class PPCCustomInserterPseudo <> for previous Isel Pseudo
Differential Revision: https://reviews.llvm.org/D55143
llvm-svn: 349044
Adds fatal errors for any target that does not support the Tiny or Kernel
codemodels by rejigging the getEffectiveCodeModel calls.
Differential Revision: https://reviews.llvm.org/D50141
llvm-svn: 348585
Fix assert about using an undefined physical register in machine instruction verify pass.
The reason is that register flag undef is missing when doing transformation from If Conversion Pass.
```
Bad machine code: Using an undefined physical register
- function: func_65
- basic block: %bb.0 entry (0x10024740738)
- instruction: BCLR killed $cr5lt, implicit $lr8, implicit $rm, implicit undef $x3
- operand 0: killed $cr5lt
LLVM ERROR: Found 1 machine code errors.
```
There are also other existing testcases with same issue. So I add -verify-machineinstrs option to open verifying.
Differential Revision: https://reviews.llvm.org/D55408
llvm-svn: 348566
Summary:
There are 4 instructions which have Inconsistent ImmMustBeMultipleOf in the
function PPCInstrInfo::instrHasImmForm, they are LFS, LFD, STFS, STFD.
These four instructions should set the ImmMustBeMultipleOf to 1 instead of 4.
Reviewed By: steven.zhang
Differential Revision: https://reviews.llvm.org/D54738
llvm-svn: 348109
In theory, we should let the PPC target to determine how to lower the TOC Entry for globals.
And the PPCTargetLowering requires this query to do some optimization for TOC_Entry.
Differential Revision: https://reviews.llvm.org/D54925
llvm-svn: 348108
Summary:
A signed comparison of i1 values produces the opposite result to an unsigned one if the condition code
includes less-than or greater-than. This is so because 1 is the most negative signed i1 number and the
most positive unsigned i1 number. The CR-logical operations used for such comparisons are non-commutative
so for signed comparisons vs. unsigned ones, the input operands just need to be swapped.
Reviewed By: steven.zhang
Differential Revision: https://reviews.llvm.org/D54825
llvm-svn: 347831
Summary:
Add a hook to the GCMetadataPrinter for emitting stack maps in
custom format. The hook will be called at stack map generation
time. The default stack map format is used if there is no hook.
For this to be useful a few data structures and accessors are
exposed from the StackMaps class, so the custom printer can
access the stack map data.
This patch authored by Cherry Zhang <cherryyz@google.com>.
Reviewers: thanm, apilipenko, reames
Reviewed By: reames
Subscribers: reames, apilipenko, nemanjai, javed.absar, kbarton, jsji, llvm-commits
Differential Revision: https://reviews.llvm.org/D53892
llvm-svn: 347584
This reverts commits r347532. Forget add the option
-mtriple powerpc64-unknown-linux-gnu. So other platform is error except
for PowerPC.
llvm-svn: 347534
Summary:
There are 4 instructions which have Inconsistent ImmMustBeMultipleOf in the
function PPCInstrInfo::instrHasImmForm, they are LFS, LFD, STFS, STFD.
These four instructions should set the ImmMustBeMultipleOf to 1 instead of 4.
Reviewed By: nemanjai
Differential Revision: https://reviews.llvm.org/D54738
llvm-svn: 347532
This is further cleanup for PPCMCCodeEmitter. The class had been contained
within the cpp file alone. Now it has been split up between a header file and
a cpp file which allows other classes to make use of the functions in this class
if required.
llvm-svn: 347428
We have efficient codegen on P9 for lowering bswap that involves moving
the value into a vector reg and moving it back. However, the check under
which we custom lowered it did not adequately reflect the actual requirements.
It required only that the subtarget be an implementation of ISA 3.0 since all
compliant implementations have to provide the vector instructions.
However, the kernel builds have a valid use case for -mno-altivec -mcpu=pwr9
(i.e. don't emit vector code, don't have to save vector regs for context
switch). So we should require the correct features for this lowering.
Fixes https://bugs.llvm.org/show_bug.cgi?id=39334
llvm-svn: 347376
When doing some instruction scheduling work, we noticed some missing itineraries.
Before we switch to machine scheduler, those missing itineraries might not have impact to actually scheduling,
because we can still get same latency due to default values.
With machine scheduler, however, itineraries will have impact to scheduling.
eg: NumMicroOps will default to be 0 if there is NO itineraries for specific instruction class.
And most of the instruction class with itineraries will have NumMicroOps default to 1.
This will has impact on the count of RetiredMOps, affects the Pending/Available Queue,
then causing different scheduling or suboptimal scheduling further.
This patch is for STWU/STWUX (IIC_LdStStoreUpd ) for P8.
Since there are already multiple IIC for store update, this patch also merge
IIC_LdStSTDU/IIC_LdStStoreUpd to IIC_LdStSTU
IIC_LdStSTDUX to IIC_LdStSTUX
and we add a new testcase in https://reviews.llvm.org/D54699 to show the difference.
Differential Revision: https://reviews.llvm.org/D54700
llvm-svn: 347311
Turns out that there was no check for a store that truncates down
to a single byte when combining a (store (bswap...)) into a byte-swapping
store. This patch just adds that check.
Fixes https://bugs.llvm.org/show_bug.cgi?id=39478.
llvm-svn: 347288
Stefan Pintile