The test changes you can see are related to the changes in ReplaceNodeResults. Though shuffle-vs-trunc-512.ll does have a test that exercises the code in LowerBITCAST. Looks like the test output didn't change because DAG combining is able to clean up the resulting type legalization. Adding the custom hook just makes type legalization work less hard.
Differential Revision: https://reviews.llvm.org/D43447
llvm-svn: 325933
We won't be able to fold the constant pool load, but its still better than materialing ones and xoring for the invert if we used PCMPEQ.
This will fix another regression from D42948.
llvm-svn: 325845
Previously this code overrode the flags and opcode used by the later code in LowerVSETCC. This makes the code difficult to read and follow.
This patch moves all the SUBUS code into its own function and makes it responsible for creating its own SDNodes on success.
Differential Revision: https://reviews.llvm.org/D43530
llvm-svn: 325827
SimplifyDemandedBits forces the demanded mask to all 1s if the node has multiple uses, unless the AssumeSingleUse flag is set.
So previously we were only really likely to simplify something if the condition had a single use. And on the off chance we did simplify with multiple uses the demanded mask being used was all ones so there was no reason to create a shrunkblend.
This patch now checks that the condition is only used by selects first, and then sets the AssumeSingleUse flag for the simplifcation. Then we convert the selects to shrunkblend, and finally replace condition.
Differential Revision: https://reviews.llvm.org/D43446
llvm-svn: 325604
This allows us to avoid an opsize prefix. And forcing some move immediates to i32 avoids a length changing prefix on those instructions.
This mostly replaces the existing combine we had for zext/sext+cmov of constants. I left in a case for sign extending a 32 bit cmov of constants to 64 bits.
Differential Revision: https://reviews.llvm.org/D43327
llvm-svn: 325601
Previously we used vptestmd, but the scheduling data for SKX says vpmovq2m/vpmovd2m is lower latency. We already used vpmovb2m/vpmovw2m for byte/word truncates. So this is more consistent anyway.
llvm-svn: 325534
We swapped the operands and used setle, but I don't see any reason to do that. I think this is a holdover from SSE where we swap and the invert to use pcmpgt. But with AVX512 we don't want an invert so we won't use pcmpgt. So there's no need to swap.
llvm-svn: 325527
Canonicalize EQ/NE PCMPM to have build vector all zeros on the RHS so we don't have to pattern match it in both locations. This significantly reduces the number of isel patterns needed since we also had to multiply it out with loads being in either operand of the 'and' input node and in the 'and' masking node.
This removes over 24000 bytes from the isel table.
llvm-svn: 325526
We're accidentally checking that the same node is a constant twice instead of checking the other node.
This isn't a functional problem since we didn't do anything below that explicitly requires constants. It just means we may have introduced a sign_extend or zero_extend that won't fold out.
llvm-svn: 325469
Summary:
Currently we convert to shuffles during lowering. This moves it to DAG combine so hopefully we can get it done before type legalization has to extend the condition.
I believe in some cases we're creating SHRUNKBLENDs that end up with constant conditions because we see the extended on the condition and think its a dynamic selelect before DAG combine gets a chance to constant fold the extend. We could add combines to turn SHRUNKBLENDs with constant condition back to vselect. But it seemed like it might be better to just send them to shuffles as early as possible so they never get a chance to become SHRUNKBLENDs. This the reason some tests went from blends controlled by a constant pool load to just move.
Some of the constant pool entries changed because the sign_extend introduced by type legalization turned undef elements in select condition into 0s. While the select->shuffle used -1 in the shuffle mask. So now the shuffle lowering can do what it wants with them.
I'll remove the lowering code as a follow up. We might be able to simplify some of the pre-checks for SHRUNKBLEND as the FIXME there says.
Reviewers: spatel, RKSimon, efriedma, zvi, andreadb
Reviewed By: spatel
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D43367
llvm-svn: 325417
Undef in select condition means we should pick the element from one side or the other. An undef in a shuffle mask means pick any element from either source or worse.
I suspect by the time we get here most of the undefs in a constant vector have been removed by other things, but doing this for safety.
llvm-svn: 325394
This seems to interfere with a target independent brcond combine that looks for the (srl (and X, C1), C2) pattern to enable TEST instructions. Once we flip, that combine doesn't fire and we end up exposing it to the X86 specific BT combine which causes us to emit a BT instruction. BT has lower throughput than TEST.
We could try to make the brcond combine aware of the alternate pattern, but since the flip was just a code size reduction and not likely to enable other combines, it seemed easier to just delay it until after lowering.
Differential Revision: https://reviews.llvm.org/D43201
llvm-svn: 325371
We already do this for 64-bit when it won't fit into a 64-bit AND/TEST's immediate field. This adds an additional qualifier to do it for any single bit constant larger than 8-bits under optsize
Differential Revision: https://reviews.llvm.org/D43346
llvm-svn: 325290
We can use PACKSS to saturate each stage of the chain: PACKSSDW down to [-32768,32767] and then PACKSSWB to [-128,127].
PACKUS is a little trickier and will be handled in a separate patch.
llvm-svn: 325235
Try to keep PACK*SDW/PACK*SWB as wide as possible, this helps ComputeNumSignBits as it can only peek through bitcasts to wider types, pre-AVX2 codegen was already doing this as it could peek through bitcasts/subvectors more easily than AVX2 could through shuffles.
This shouldn't affect existing results as calls to truncateVectorWithPACK ensure we have enough sign bits to pack to the same value, but it should make it possible to use truncateVectorWithPACK chains to perform saturation in combineTruncateWithSat with a future patch.
llvm-svn: 325149
While the AVX512 VTRUNCS/VTRUNCUS instructions require legal types, truncateVectorWithPACK handles cases with multiples of legal types through splitting/concatenation. So we just need to ensure that the src/dst scalar types are correct and leave truncateVectorWithPACK to handle the rest of it.
llvm-svn: 325127
Summary:
Instead of solving the hard problem of how to pass the callee to the indirect
jump thunk without a register, just use a CSR. At a call boundary, there's
nothing stopping us from using a CSR to hold the callee as long as we save and
restore it in the prologue.
Also, add tests for this mregparm=3 case. I wrote execution tests for
__llvm_retpoline_push, but they never got committed as lit tests, either
because I never rewrote them or because they got lost in merge conflicts.
Reviewers: chandlerc, dwmw2
Subscribers: javed.absar, kristof.beyls, hiraditya, llvm-commits
Differential Revision: https://reviews.llvm.org/D43214
llvm-svn: 325049
ISD::ADD implies individual vector element addition with no carries between elements. But for a vXi1 type that would be the same as XOR. And we already turn ISD::ADD into ISD::XOR for all vXi1 types during lowering. So the ISD::ADD pattern would never be able to match anyway.
KADD is different, it adds the elements but also propagates a carry between them. This just a way of doing an add in k-register without bitcasting to the scalar domain. There's still no way to match the pattern, but at least its not obviously wrong.
llvm-svn: 324861
Summary:
Currently we only use min/max to help with ule/uge compares because it removes an invert of the result that would otherwise be needed. But we can also use it for ult/ugt compares if it will prevent the need for a sign bit flip needed to use pcmpgt at the cost of requiring an invert after the compare.
I also refactored the code so that the max/min code is self contained and does its own return instead of setting up a flag to manipulate the rest of the function's behavior.
Most of the test cases look ok with this. I did notice that we added instructions when one of the operands being sign flipped is a constant vector that we were able to constant fold the flip into.
I also noticed that sometimes the SSE min/max clobbers a register that is needed after the compare. This resulted in an extra move being inserted before the min/max to preserve the register. We could try to detect this and switch from min to max and change the compare operands to use the operand that gets reused in the compare.
Reviewers: spatel, RKSimon
Reviewed By: RKSimon
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D42935
llvm-svn: 324842
This allows us to recognise more saturation patterns and also simplify some MINMAX codegen that was failing to combine CMPGE comparisons to a legal CMPGT.
Differential Revision: https://reviews.llvm.org/D43014
llvm-svn: 324837
This patch adds a new function attribute "required-vector-width" that can be set by the frontend to indicate the maximum vector width present in the original source code. The idea is that this would be set based on ABI requirements, intrinsics or explicit vector types being used, maybe simd pragmas, etc. The backend will then use this information to determine if its save to make 512-bit vectors illegal when the preference is for 256-bit vectors.
For code that has no vectors in it originally and only get vectors through the loop and slp vectorizers this allows us to generate code largely similar to our AVX2 only output while still enabling AVX512 features like mask registers and gather/scatter. The loop vectorizer doesn't always obey TTI and will create oversized vectors with the expectation the backend will legalize it. In order to avoid changing the vectorizer and potentially harm our AVX2 codegen this patch tries to make the legalizer behavior similar.
This is restricted to CPUs that support AVX512F and AVX512VL so that we have good fallback options to use 128 and 256-bit vectors and still get masking.
I've qualified every place I could find in X86ISelLowering.cpp and added tests cases for many of them with 2 different values for the attribute to see the codegen differences.
We still need to do frontend work for the attribute and teach the inliner how to merge it, etc. But this gets the codegen layer ready for it.
Differential Revision: https://reviews.llvm.org/D42724
llvm-svn: 324834
We promote these via a DAG combine now before lowering gets the chance.
Also remove the v2i1 custom handling since it will no longer be triggered.
llvm-svn: 324833
These were added as part of the refactoring for prefer vector width. At the time I thought the hasAVX512 here would be replaced with "allow 512 bit vectors" so that it would read "allow 512 bit vectors OR VLX". But now the plan is to only give the option of disabling 512 bit vectors when VLX is enabled. So we don't need this qualification at all
llvm-svn: 324831
Summary:
This patch changes the signature of the avx512 packed fp compare intrinsics to return a vXi1 vector and no longer take a mask as input. The casts to scalar type will now need to be explicit in the IR. The masking node will now be an explicit and in the IR.
This makes the intrinsic look much more similar to an fcmp instruction that we wish we could use for these but can't. We already use icmp instructions for integer compares.
Previously the lowering step of isel would turn the intrinsic into an X86 specific ISD node and a emit the masking nodes as well as some bitcasts. This means DAG combines can't see the vXi1 type until somewhat late, making it more difficult to combine out gpr<->mask transition sequences. By exposing the vXi1 type explicitly in the IR and initial SelectionDAG we give earlier DAG combines and even InstCombine the chance to see it and optimize it.
This should make any issues with gpr<->mask sequences the same between integer and fp. Meaning we only have to fix them once.
Reviewers: spatel, delena, RKSimon, zvi
Reviewed By: RKSimon
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D43137
llvm-svn: 324827
Undef VLX, getSetCCResultType returns v2i1/v4i1 for v2f32/v4f32 so default type legalization will end up changing the setcc result type back to vXi1 if it had been extended. The resulting extend gets messed up further by type legalization and is difficult to recombine back to (v4i32 (setcc (v4f32))) after legalization.
I went ahead and enabled this for SSE2 and later since its always the result we want and this helps type legalization get there in less steps.
llvm-svn: 324822
This prevents extends of masks being introduced during lowering where it become difficult to combine them out.
There are a few oddities in here.
We sometimes concatenate two k-registers produced by two compares, sign_extend the combined pair, then extract two halves. This worked better previously because the sign_extend wasn't created until after the fp_to_sint was split which led to a split sign_extend being created.
We probably also need to custom type legalize (v2i32 (sext v2i1)) via widening.
llvm-svn: 324820
This avoids a constant pool load to create 1.
The int->float are showing converts to mask and back. We probably need to widen inputs to sint_to_fp/uint_to_fp before type legalization.
llvm-svn: 324805
Craig Topper