Lookup tables generate non PIC-friendly code, which requires dynamic relocation as described in:
https://bugs.llvm.org/show_bug.cgi?id=45244
This patch adds a new pass that converts lookup tables to relative lookup tables to make them PIC-friendly.
Differential Revision: https://reviews.llvm.org/D94355
D96109 was recently submitted which contains the refactored implementation of
-funique-internal-linakge-names by adding the unique suffixes in clang rather
than as an LLVM pass. Deleting the former implementation in this change.
Differential Revision: https://reviews.llvm.org/D98234
We have the `enable-loopinterchange` option in legacy pass manager but not in NPM.
Add `LoopInterchange` pass to the optimization pipeline (at the same position as before)
when `enable-loopinterchange` is turned on.
Reviewed By: aeubanks, fhahn
Differential Revision: https://reviews.llvm.org/D98116
We're running into undefined references using ThinLTO with -O0 on
Windows/Chrome. This fixes that.
This matches the legacy PM.
Reviewed By: tejohnson
Differential Revision: https://reviews.llvm.org/D97414
-O1 and above do dont call real optimizer pipeline in ThinLTO PreLink.
Also clang can't add PostLink OptimizerLastEPCallbacks for in-process ThinLTO.
This results in missing sanitizer passes with ThinLTO.
Simple working solution is just call OptimizerLastEPCallbacks
at the end of buildThinLTOPreLinkDefaultPipeline.
Differential Revision: https://reviews.llvm.org/D96320
For ThinLTO, PreLink ICP is skipped to favor better profile annotation during LTO PostLink. This change applies the same tweak for MonoLTO. Note that PreLink ICP not only makes PostLink profile annotation harder, it is also uncoordinated with PostLink ICP so duplicated ICP could happen.
Differential Revision: https://reviews.llvm.org/D97028
This enables use of MemorySSA instead of MemDep in MemCpyOpt. To
allow this without significant compile-time impact, the MemCpyOpt
pass is moved directly before DSE (in the cases where this was not
already the case), which allows us to reuse the existing MemorySSA
analysis.
Unlike the MemDep-based implementation, the MemorySSA-based MemCpyOpt
can also perform simple optimizations across basic blocks.
Differential Revision: https://reviews.llvm.org/D94376
The NPM LTO pipeline has a lot of fixme's and missing passes, causing a
lot of regressions after the switch in c70737b. Notably unrolling and
vectorization were both disabled, but many other passes are missing
compared to the old pass manager. This attempt to enable the most
obvious missing passes like the unroller, vectorization and other loop
passes, fixing the existing FIXME comments.
Differential Revision: https://reviews.llvm.org/D96780
The PrepareForLTO stage of LoopRotate tries to avoid unrolling loops
with calls that might be inlined later. See D94232 where this was
introduced.
We didn't catch all occurances of the LoopRotatePass in the New Pass
Manager, so the original regression in astar returned with the pass
manager switch.
The GPUDivergenceAnalysis is now renamed to just "DivergenceAnalysis"
since there is no conflict with LegacyDivergenceAnalysis. In the
legacy PM, this analysis can only be used through the legacy DA
serving as a wrapper. It is now made available as a pass in the new
PM, and has no relation with the legacy DA.
The new DA currently cannot handle irreducible control flow; its
presence can cause the analysis to run indefinitely. The analysis is
now modified to detect this and report all instructions in the
function as divergent. This is super conservative, but allows the
analysis to be used without hanging the compiler.
Reviewed By: aeubanks
Differential Revision: https://reviews.llvm.org/D96615
It seems nicer to list passes given a flag rather than displaying all
passes in opt --help.
This is awkwardly structured because a PassBuilder is required, but
reusing the PassBuilder in runPassPipeline() doesn't work because we
read the input IR before getting to runPassPipeline(). So printing the
list of passes needs to happen before reading the input IR. If we remove
the legacy PM code in main() and move everything from NewPMDriver.cpp
into opt.cpp, we can create the PassBuilder before reading IR and check
if we should print the list of passes and exit. But until then this hack
seems fine.
Compared to the legacy PM, the new PM passes are lacking descriptions.
We'll need to figure out a way to add descriptions if we think this is
important.
Also, this only works for passes specified in PassRegistry.def. If we
want to print other custom registered passes, we'll need a different
mechanism.
Reviewed By: asbirlea
Differential Revision: https://reviews.llvm.org/D96101
Sample re-annotation is required in LTO time to achieve a reasonable post-inline profile quality. However, we have seen that such LTO-time re-annotation degrades profile quality. This is mainly caused by preLTO code duplication that is done by passes such as loop unrolling, jump threading, indirect call promotion etc, where samples corresponding to a source location are aggregated multiple times due to the duplicates. In this change we are introducing a concept of distribution factor for pseudo probes so that samples can be distributed for duplicated probes scaled by a factor. We hope that optimizations duplicating code well-maintain the branch frequency information (BFI) based on which probe distribution factors are calculated. Distribution factors are updated at the end of preLTO pipeline to reflect an estimated portion of the real execution count.
This change also introduces a pseudo probe verifier that can be run after each IR passes to detect duplicated pseudo probes.
A saturated distribution factor stands for 1.0. A pesudo probe will carry a factor with the value ranged from 0.0 to 1.0. A 64-bit integral distribution factor field that represents [0.0, 1.0] is associated to each block probe. Unfortunately this cannot be done for callsite probes due to the size limitation of a 32-bit Dwarf discriminator. A 7-bit distribution factor is used instead.
Changes are also needed to the sample profile inliner to deal with prorated callsite counts. Call sites duplicated by PreLTO passes, when later on inlined in LTO time, should have the callees’s probe prorated based on the Prelink-computed distribution factors. The distribution factors should also be taken into account when computing hotness for inline candidates. Also, Indirect call promotion results in multiple callisites. The original samples should be distributed across them. This is fixed by adjusting the callisites' distribution factors.
Reviewed By: wmi
Differential Revision: https://reviews.llvm.org/D93264
Some benchmarks regress with non-trivial unswitching, so add an option
to opt-out of performing non-trivial unswitching while investigating.
Reviewed By: asbirlea
Differential Revision: https://reviews.llvm.org/D95796
As it looks like NewPM generally is using SimpleLoopUnswitch
instead of LoopUnswitch, this patch also use SimpleLoopUnswitch
in the ExtraVectorizerPasses sequence (compared with LegacyPM
which use the LoopUnswitch pass).
Reviewed By: aeubanks
Differential Revision: https://reviews.llvm.org/D95457
D84108 exposed a bad interaction between inlining and loop-rotation
during regular LTO, which is causing notable regressions in at least
CINT2006/473.astar.
The problem boils down to: we now rotate a loop just before the vectorizer
which requires duplicating a function call in the preheader when compiling
the individual files ('prepare for LTO'). But this then prevents further
inlining of the function during LTO.
This patch tries to resolve this issue by making LoopRotate more
conservative with respect to rotating loops that have inline-able calls
during the 'prepare for LTO' stage.
I think this change intuitively improves the current situation in
general. Loop-rotate tries hard to avoid creating headers that are 'too
big'. At the moment, it assumes all inlining already happened and the
cost of duplicating a call is equal to just doing the call. But with LTO,
inlining also happens during full LTO and it is possible that a previously
duplicated call is actually a huge function which gets inlined
during LTO.
From the perspective of LV, not much should change overall. Most loops
calling user-provided functions won't get vectorized to start with
(unless we can infer that the function does not touch memory, has no
other side effects). If we do not inline the 'inline-able' call during
the LTO stage, we merely delayed loop-rotation & vectorization. If we
inline during LTO, chances should be very high that the inlined code is
itself vectorizable or the user call was not vectorizable to start with.
There could of course be scenarios where we inline a sufficiently large
function with code not profitable to vectorize, which would have be
vectorized earlier (by scalarzing the call). But even in that case,
there probably is no big performance impact, because it should be mostly
down to the cost-model to reject vectorization in that case. And then
the version with scalarized calls should also not be beneficial. In a way,
LV should have strictly more information after inlining and make more
accurate decisions (barring cost-model issues).
There is of course plenty of room for things to go wrong unexpectedly,
so we need to keep a close look at actual performance and address any
follow-up issues.
I took a look at the impact on statistics for
MultiSource/SPEC2000/SPEC2006. There are a few benchmarks with fewer
loops rotated, but no change to the number of loops vectorized.
Reviewed By: sanwou01
Differential Revision: https://reviews.llvm.org/D94232
Expanding from D94808 - we ensure the same InlineAdvisor is used by both
InlinerPass instances. The notion of mandatory inlining is moved into
the core InlineAdvisor: advisors anyway have to handle that case, so
this change also factors out that a bit better.
Differential Revision: https://reviews.llvm.org/D94825
https://reviews.llvm.org/D90402 was inconsistent with where it put
LoopFlatten between the two pass managers. It also missed adding it to
the non-O1 function simplification pipeline.
PR48738
Reviewed By: SjoerdMeijer
Differential Revision: https://reviews.llvm.org/D94650
to Pass.h.
In some compiler passes like SampleProfileLoaderPass, we want to know which
LTO/ThinLTO phase the pass is in. Currently the phase is represented in enum
class PassBuilder::ThinLTOPhase, so it is only available in PassBuilder and
it also cannot represent phase in full LTO. The patch extends it to include
full LTO phases and move it from PassBuilder.h to Pass.h, then it is much
easier for PassBuilder to communiate with each pass about current LTO phase.
Differential Revision: https://reviews.llvm.org/D94613
This currently blocks --print-before/after with a legacy PM pass, for
example when we use the new PM for the optimization pipeline but the
legacy PM for the codegen pipeline. Also in the future when the codegen
pipeline works with the new PM there will be multiple places to specify
passes, so even when everything is using the new PM, there will still be
multiple places that can accept different pass names.
Reviewed By: hoy, ychen
Differential Revision: https://reviews.llvm.org/D94283
bb7d3af113 disabled hoisting in SimplifyCFG by default, but enabled it
late in the pipeline. But it appears as if the LTO pipelines got missed.
This patch adjusts the LTO pipelines to also enable hoisting in the
later stages.
Unfortunately there's no easy way to add a test for the change I think.
Reviewed By: lebedev.ri
Differential Revision: https://reviews.llvm.org/D93684
`UniqueInternalLinkageNamesPass` is useful to CSSPGO, especially when pseudo probe is used. It solves naming conflict for static functions which otherwise will share a merged profile and likely have a profile quality issue with mismatched CFG checksums. Since the pseudo probe instrumentation happens very early in the pipeline, I'm moving `UniqueInternalLinkageNamesPass` right before it. This is being done only to the new pass manager.
Reviewed By: dblaikie, aeubanks
Differential Revision: https://reviews.llvm.org/D93656
CGSCCOptimizerLateEPCallbacks are supposed to be run before the function
simplification pipeline, like in the legacy PM and as specified in the
comments for registerCGSCCOptimizerLateEPCallback().
Reviewed By: ychen
Differential Revision: https://reviews.llvm.org/D93871
AMDGPUTargetMachine::adjustPassManager() adds some alias analyses to the
legacy PM. We need a way to do the same for the new PM in order to port
AMDGPUTargetMachine::adjustPassManager() to the new PM.
Currently the new PM adds alias analyses by creating an AAManager via
PassBuilder and overriding the AAManager a PassManager uses via
FunctionAnalysisManager::registerPass().
We will continue to respect a custom AA pipeline that specifies an exact
AA pipeline to use, but for "default" we will now add alias analyses
that backends specify. Most uses of PassManager use the "default"
AAManager created by PassBuilder::buildDefaultAAPipeline(). Backends can
override the newly added TargetMachine::registerAliasAnalyses() to add custom
alias analyses.
Reviewed By: ychen
Differential Revision: https://reviews.llvm.org/D93261
Extracting the similar regions is the first step in the IROutliner.
Using the IRSimilarityIdentifier, we collect the SimilarityGroups and
sort them by how many instructions will be removed. Each
IRSimilarityCandidate is used to define an OutlinableRegion. Each
region is ordered by their occurrence in the Module and the regions that
are not compatible with previously outlined regions are discarded.
Each region is then extracted with the CodeExtractor into its own
function.
We test that correctly extract in:
test/Transforms/IROutliner/extraction.ll
test/Transforms/IROutliner/address-taken.ll
test/Transforms/IROutliner/outlining-same-globals.ll
test/Transforms/IROutliner/outlining-same-constants.ll
test/Transforms/IROutliner/outlining-different-structure.ll
Recommit of bf899e8913 fixing memory
leaks.
Reviewers: paquette, jroelofs, yroux
Differential Revision: https://reviews.llvm.org/D86975
This is being recommitted to try and address the MSVC complaint.
This patch implements a DDG printer pass that generates a graph in
the DOT description language, providing a more visually appealing
representation of the DDG. Similar to the CFG DOT printer, this
functionality is provided under an option called -dot-ddg and can
be generated in a less verbose mode under -dot-ddg-only option.
Reviewed By: Meinersbur
Differential Revision: https://reviews.llvm.org/D90159
This patch implements a DDG printer pass that generates a graph in
the DOT description language, providing a more visually appealing
representation of the DDG. Similar to the CFG DOT printer, this
functionality is provided under an option called -dot-ddg and can
be generated in a less verbose mode under -dot-ddg-only option.
Differential Revision: https://reviews.llvm.org/D90159
I tried to put it in the same place in the pipeline as the legacy PM.
Fixes PR48399.
Reviewed By: asbirlea, nikic
Differential Revision: https://reviews.llvm.org/D93002
This patch adds new PM support for the pass and the pass can be now used
during middle-end transforms. The old pass is remamed to
ScalarizeMaskedMemIntrinLegacyPass.
Reviewed-By: skatkov, aeubanks
Differential Revision: https://reviews.llvm.org/D92743
This changes --print-before/after to be a list of strings rather than
legacy passes. (this also has the effect of not showing the entire list
of passes in --help-hidden after --print-before/after, which IMO is
great for making it less verbose).
Currently PrintIRInstrumentation passes the class name rather than pass
name to llvm::shouldPrintBeforePass(), meaning
llvm::shouldPrintBeforePass() never functions as intended in the NPM.
There is no easy way of converting class names to pass names outside of
within an instance of PassBuilder.
This adds a map of pass class names to their short names in
PassRegistry.def within PassInstrumentationCallbacks. It is populated
inside the constructor of PassBuilder, which takes a
PassInstrumentationCallbacks.
Add a pointer to PassInstrumentationCallbacks inside
PrintIRInstrumentation and use the newly created map.
This is a bit hacky, but I can't think of a better way since the short
id to class name only exists within PassRegistry.def. This also doesn't
handle passes not in PassRegistry.def but rather added via
PassBuilder::registerPipelineParsingCallback().
llvm/test/CodeGen/Generic/print-after.ll doesn't seem very useful now
with this change.
Reviewed By: ychen, jamieschmeiser
Differential Revision: https://reviews.llvm.org/D87216
Enable performing mandatory inlinings upfront, by reusing the same logic
as the full inliner, instead of the AlwaysInliner. This has the
following benefits:
- reduce code duplication - one inliner codebase
- open the opportunity to help the full inliner by performing additional
function passes after the mandatory inlinings, but before th full
inliner. Performing the mandatory inlinings first simplifies the problem
the full inliner needs to solve: less call sites, more contextualization, and,
depending on the additional function optimization passes run between the
2 inliners, higher accuracy of cost models / decision policies.
Note that this patch does not yet enable much in terms of post-always
inline function optimization.
Differential Revision: https://reviews.llvm.org/D91567
This change introduces a new clang switch `-fpseudo-probe-for-profiling` to enable AutoFDO with pseudo instrumentation. Please refer to https://reviews.llvm.org/D86193 for the whole story.
One implication from pseudo-probe instrumentation is that the profile is now sensitive to CFG changes. We perform the pseudo instrumentation very early in the pre-LTO pipeline, before any CFG transformation. This ensures that the CFG instrumented and annotated is stable and optimization-resilient.
The early instrumentation also allows the inliner to duplicate probes for inlined instances. When a probe along with the other instructions of a callee function are inlined into its caller function, the GUID of the callee function goes with the probe. This allows samples collected on inlined probes to be reported for the original callee function.
Reviewed By: wmi
Differential Revision: https://reviews.llvm.org/D86502
Reverting commit due to address sanitizer errors.
> Extracting the similar regions is the first step in the IROutliner.
>
> Using the IRSimilarityIdentifier, we collect the SimilarityGroups and
> sort them by how many instructions will be removed. Each
> IRSimilarityCandidate is used to define an OutlinableRegion. Each
> region is ordered by their occurrence in the Module and the regions that
> are not compatible with previously outlined regions are discarded.
>
> Each region is then extracted with the CodeExtractor into its own
> function.
>
> We test that correctly extract in:
> test/Transforms/IROutliner/extraction.ll
> test/Transforms/IROutliner/address-taken.ll
> test/Transforms/IROutliner/outlining-same-globals.ll
> test/Transforms/IROutliner/outlining-same-constants.ll
> test/Transforms/IROutliner/outlining-different-structure.ll
>
> Reviewers: paquette, jroelofs, yroux
>
> Differential Revision: https://reviews.llvm.org/D86975
This reverts commit bf899e8913.
Extracting the similar regions is the first step in the IROutliner.
Using the IRSimilarityIdentifier, we collect the SimilarityGroups and
sort them by how many instructions will be removed. Each
IRSimilarityCandidate is used to define an OutlinableRegion. Each
region is ordered by their occurrence in the Module and the regions that
are not compatible with previously outlined regions are discarded.
Each region is then extracted with the CodeExtractor into its own
function.
We test that correctly extract in:
test/Transforms/IROutliner/extraction.ll
test/Transforms/IROutliner/address-taken.ll
test/Transforms/IROutliner/outlining-same-globals.ll
test/Transforms/IROutliner/outlining-same-constants.ll
test/Transforms/IROutliner/outlining-different-structure.ll
Reviewers: paquette, jroelofs, yroux
Differential Revision: https://reviews.llvm.org/D86975
Currently, `-indvars` runs first, and then immediately after `-loop-idiom` does.
I'm not really sure if `-loop-idiom` requires `-indvars` to run beforehand,
but i'm *very* sure that `-indvars` requires `-loop-idiom` to run afterwards,
as it can be seen in the phase-ordering test.
LoopIdiom runs on two types of loops: countable ones, and uncountable ones.
For uncountable ones, IndVars obviously didn't make any change to them,
since they are uncountable, so for them the order should be irrelevant.
For countable ones, well, they should have been countable before IndVars
for IndVars to make any change to them, and since SCEV is used on them,
it shouldn't matter if IndVars have already canonicalized them.
So i don't really see why we'd want the current ordering.
Should this cause issues, it will give us a reproducer test case
that shows flaws in this logic, and we then could adjust accordingly.
While this is quite likely beneficial in-the-wild already,
it's a required part for the full motivational pattern
behind `left-shift-until-bittest` loop idiom (D91038).
Reviewed By: dmgreen
Differential Revision: https://reviews.llvm.org/D91800
This matches the legacy PM's EP_ModuleOptimizerEarly. Some backends use
this extension point and adding the pass somewhere else like
PipelineStartEPCallback doesn't work.
Reviewed By: ychen
Differential Revision: https://reviews.llvm.org/D91804
The devirtualization wrapper misses cases where if it wraps a pass
manager, an individual pass may devirtualize an indirect call created by
a previous pass. For example, inlining may create a new indirect call
which is devirtualized by instcombine. Currently the devirtualization
wrapper will not see that because it only checks cgscc edges at the very
beginning and end of the pass (manager) it wraps.
This fixes some tests testing this exact behavior in the legacy PM.
Instead of checking WeakTrackingVHs for CallBases at the very beginning
and end of the pass it wraps, check every time
updateCGAndAnalysisManagerForPass() is called.
check-llvm and check-clang with -abort-on-max-devirt-iterations-reached
on by default doesn't show any failures outside of tests specifically
testing it so it doesn't needlessly rerun passes more than necessary.
(The NPM -O2/3 pipeline run the inliner/function simplification pipeline
under a devirtualization repeater pass up to 4 times by default).
http://llvm-compile-time-tracker.com/?config=O3&stat=instructions&remote=aeubanks
shows that 7zip has ~1% compile time regression. I looked at it and saw
that there indeed was devirtualization happening that was not previously
caught, so now it reruns the CGSCC pipeline on some SCCs, which is WAI.
The initial land assumed CallBase WeakTrackingVHs would always be
CallBases, but they can be RAUW'd with undef.
Reviewed By: asbirlea
Differential Revision: https://reviews.llvm.org/D89587
The devirtualization wrapper misses cases where if it wraps a pass
manager, an individual pass may devirtualize an indirect call created by
a previous pass. For example, inlining may create a new indirect call
which is devirtualized by instcombine. Currently the devirtualization
wrapper will not see that because it only checks cgscc edges at the very
beginning and end of the pass (manager) it wraps.
This fixes some tests testing this exact behavior in the legacy PM.
Instead of checking WeakTrackingVHs for CallBases at the very beginning
and end of the pass it wraps, check every time
updateCGAndAnalysisManagerForPass() is called.
check-llvm and check-clang with -abort-on-max-devirt-iterations-reached
on by default doesn't show any failures outside of tests specifically
testing it so it doesn't needlessly rerun passes more than necessary.
(The NPM -O2/3 pipeline run the inliner/function simplification pipeline
under a devirtualization repeater pass up to 4 times by default).
http://llvm-compile-time-tracker.com/?config=O3&stat=instructions&remote=aeubanks
shows that 7zip has ~1% compile time regression. I looked at it and saw
that there indeed was devirtualization happening that was not previously
caught, so now it reruns the CGSCC pipeline on some SCCs, which is WAI.
Reviewed By: asbirlea
Differential Revision: https://reviews.llvm.org/D89587
This reuses the existing lower-matrix-intrinsics pass rather than going
the legacy pass route of creating a new pass.
Use this new variant in the NPM -O0 pipeline.
Reviewed By: asbirlea
Differential Revision: https://reviews.llvm.org/D91811
This moves handling of alwaysinline, coroutines, matrix lowering, PGO,
and LTO-required passes into PassBuilder. Much of this is replicated
between Clang and opt. Other out-of-tree users also replicate some of
this, such as Rust [1] replicating the alwaysinline, LTO, and PGO
passes.
The LTO passes are also now run in
build(Thin)LTOPreLinkDefaultPipeline() since they are semantically
required for (Thin)LTO.
[1]: f5230fbf76/compiler/rustc_llvm/llvm-wrapper/PassWrapper.cpp (L896)
Reviewed By: tejohnson
Differential Revision: https://reviews.llvm.org/D91585
This patch adds a new pass to add !annotation metadata for entries in
@llvm.global.anotations, which is generated using
__attribute__((annotate("_name"))) on functions in Clang.
This has been discussed on llvm-dev as part of
RFC: Combining Annotation Metadata and Remarks
http://lists.llvm.org/pipermail/llvm-dev/2020-November/146393.html
Reviewed By: thegameg
Differential Revision: https://reviews.llvm.org/D91195
This patch adds a new !annotation metadata kind which can be used to
attach annotation strings to instructions.
It also adds a new pass that emits summary remarks per function with the
counts for each annotation kind.
The intended uses cases for this new metadata is annotating
'interesting' instructions and the remarks should provide additional
insight into transformations applied to a program.
To motivate this, consider these specific questions we would like to get answered:
* How many stores added for automatic variable initialization remain after optimizations? Where are they?
* How many runtime checks inserted by a frontend could be eliminated? Where are the ones that did not get eliminated?
Discussed on llvm-dev as part of 'RFC: Combining Annotation Metadata and Remarks'
(http://lists.llvm.org/pipermail/llvm-dev/2020-November/146393.html)
Reviewed By: thegameg, jdoerfert
Differential Revision: https://reviews.llvm.org/D91188
Some targets may add required passes via
TargetMachine::registerPassBuilderCallbacks(). We need to run those even
under -O0. As an example, BPFTargetMachine adds
BPFAbstractMemberAccessPass, a required pass.
This also allows us to clean up BackendUtil.cpp (and out-of-tree Rust
usage of the NPM) by allowing us to share added passes like coroutines
and sanitizers between -O0 and other optimization levels.
Since callbacks may end up not adding passes, we need to check if the
pass managers are empty before adding them, so PassManager now has an
isEmpty() function. For example, polly adds callbacks but doesn't always
add passes in those callbacks, so this is necessary to keep
-debug-pass-manager tests' output from changing depending on if polly is
enabled or not.
Tests are a continuation of those added in
https://reviews.llvm.org/D89083.
Reviewed By: asbirlea, Meinersbur
Differential Revision: https://reviews.llvm.org/D89158
This is a prep step for widening induction variables in LoopFlatten if this is
posssible (D90640), to avoid having to perform certain overflow checks. Since
IndVarSimplify may already widen induction variables, we want to run
LoopFlatten just before IndVarSimplify. This is a minor reshuffle as both
passes were already close after each other.
Differential Revision: https://reviews.llvm.org/D90402
This converts LoopFlatten from a LoopPass to a FunctionPass so that we don't
run into problems of a loop pass deleting a (inner)loop.
Differential Revision: https://reviews.llvm.org/D90940
Some targets may add required passes via
TargetMachine::registerPassBuilderCallbacks(). We need to run those even
under -O0. As an example, BPFTargetMachine adds
BPFAbstractMemberAccessPass, a required pass.
This also allows us to clean up BackendUtil.cpp (and out-of-tree Rust
usage of the NPM) by allowing us to share added passes like coroutines
and sanitizers between -O0 and other optimization levels.
Tests are a continuation of those added in
https://reviews.llvm.org/D89083.
In order to prevent TargetMachines from adding unnecessary optimization
passes at -O0, TargetMachine::registerPassBuilderCallbacks() will be
changed to take an OptimizationLevel, but that will be done separately.
Reviewed By: asbirlea
Differential Revision: https://reviews.llvm.org/D89158
Make DebugLogging a member variable so that users of PassBuilder don't
need to pass it around so much.
Move call to TargetMachine::registerPassBuilderCallbacks() within
PassBuilder so users don't need to remember to call it.
Reviewed By: asbirlea
Differential Revision: https://reviews.llvm.org/D90437
GVN Load PRE can split the backedge causing breaking the loop structure where the latch
contains the conditional branch with for example induction variable.
Different optimizations expect this form of the loop, so it is better to preserve it for some time.
This CL adds an option to control an ability to split backedge.
Default value is true so technically it is NFC and current behavior is not changed.
Reviewers: fedor.sergeev, mkazantsev, nikic, reames, fhahn
Reviewed By: mkazasntsev
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D89854
`-separate-const-offset-from-gep` has not yet be ported, so some tests are not updated.
Reviewed By: aeubanks
Differential Revision: https://reviews.llvm.org/D90149
This doesn't support -structurizecfg-skip-uniform-regions since that
would require porting LegacyDivergenceAnalysis.
The NPM doesn't support adding a non-analysis pass as a dependency of
another, so I had to add -lowerswitch to some tests or pin them to the
legacy PM.
This is the only RegionPass in tree, so I simply copied the logic for
finding all Regions from the legacy PM's RGManager into
StructurizeCFG::run().
Reviewed By: arsenm
Differential Revision: https://reviews.llvm.org/D89026
It was already disabled under -Oz in
buildFunctionSimplificationPipeline(), but not in
buildModuleOptimizationPipeline()/addPGOInstrPasses().
Reviewed By: fhahn
Differential Revision: https://reviews.llvm.org/D89927
This broke Chromium's PGO build, it seems because hot-cold-splitting got turned
on unintentionally. See comment on the code review for repro etc.
> This patch adds -f[no-]split-cold-code CC1 options to clang. This allows
> the splitting pass to be toggled on/off. The current method of passing
> `-mllvm -hot-cold-split=true` to clang isn't ideal as it may not compose
> correctly (say, with `-O0` or `-Oz`).
>
> To implement the -fsplit-cold-code option, an attribute is applied to
> functions to indicate that they may be considered for splitting. This
> removes some complexity from the old/new PM pipeline builders, and
> behaves as expected when LTO is enabled.
>
> Co-authored by: Saleem Abdulrasool <compnerd@compnerd.org>
> Differential Revision: https://reviews.llvm.org/D57265
> Reviewed By: Aditya Kumar, Vedant Kumar
> Reviewers: Teresa Johnson, Aditya Kumar, Fedor Sergeev, Philip Pfaffe, Vedant Kumar
This reverts commit 273c299d5d.
This patch adds -f[no-]split-cold-code CC1 options to clang. This allows
the splitting pass to be toggled on/off. The current method of passing
`-mllvm -hot-cold-split=true` to clang isn't ideal as it may not compose
correctly (say, with `-O0` or `-Oz`).
To implement the -fsplit-cold-code option, an attribute is applied to
functions to indicate that they may be considered for splitting. This
removes some complexity from the old/new PM pipeline builders, and
behaves as expected when LTO is enabled.
Co-authored by: Saleem Abdulrasool <compnerd@compnerd.org>
Differential Revision: https://reviews.llvm.org/D57265
Reviewed By: Aditya Kumar, Vedant Kumar
Reviewers: Teresa Johnson, Aditya Kumar, Fedor Sergeev, Philip Pfaffe, Vedant Kumar
-loop-extract-single is just -loop-extract on one loop.
-loop-extract depended on -break-crit-edges and -loop-simplify in the
legacy PM, but the NPM doesn't allow specifying pass dependencies like
that, so manually add those passes to the RUN lines where necessary.
Reviewed By: asbirlea
Differential Revision: https://reviews.llvm.org/D89016
In the NPM, a pass cannot depend on another non-analysis pass. So pin
the test that tests that -lowerswitch is run automatically to legacy PM.
Reviewed By: sameerds
Differential Revision: https://reviews.llvm.org/D89051
This removes "VerifyEachPass" parameters from a lot of functions which is nice.
Don't verify after special passes or VerifierPass.
This introduces verification on loop and cgscc passes, verifying the corresponding function/module.
Reviewed By: ychen
Differential Revision: https://reviews.llvm.org/D88764
This is a simple pass that flattens nested loops. The intention is to optimise
loop nests like this, which together access an array linearly:
for (int i = 0; i < N; ++i)
for (int j = 0; j < M; ++j)
f(A[i*M+j]);
into one loop:
for (int i = 0; i < (N*M); ++i)
f(A[i]);
It can also flatten loops where the induction variables are not used in the
loop. This can help with codesize and runtime, especially on simple cpus
without advanced branch prediction.
This is only worth flattening if the induction variables are only used in an
expression like i*M+j. If they had any other uses, we would have to insert a
div/mod to reconstruct the original values, so this wouldn't be profitable.
This partially fixes PR40581 as this pass triggers on one of the two cases. I
will follow up on this to learn LoopFlatten a few more (small) tricks. Please
note that LoopFlatten is not yet enabled by default.
Patch by Oliver Stannard, with minor tweaks from Dave Green and myself.
Differential Revision: https://reviews.llvm.org/D42365
bug 45566 shows the process of building coroutine frame won't consider
that the lifetimes of different local variables are not overlapped,
which means the compiler could generates smaller frame.
This patch calculate the lifetime range of each alloca by StackLifetime
class. Then the patch build non-overlapped sets for allocas whose
lifetime ranges are not overlapped. We use the largest type in a
non-overlapped set as the field type in the frame. In insertSpills
process, if we find the type of field is not the same with the alloca,
we cast the pointer to the field type to the pointer to the alloca type.
Since the lifetime range of alloca in one non-overlapped set is not
overlapped with each other, it should be ok to reuse the storage space
in the frame.
Test plan: check-llvm, check-clang, cppcoro, folly
Reviewers: junparser, lxfind, modocache
Differential Revision: https://reviews.llvm.org/D87596
If -enable-constraint-elimination is specified, add it to the -O2/-O3 pipeline.
(-O1 uses a separate function now.)
Reviewed By: fhahn, aeubanks
Differential Revision: https://reviews.llvm.org/D88365
This introduces an analysis pass that wraps IRSimilarityIdentifier,
and adds a printer pass to examine in what function similarities are
being found.
Test for what the printer pass can find are in
test/Analysis/IRSimilarityIdentifier.
Reviewed by: paquette, jroelofs
Differential Revision: https://reviews.llvm.org/D86973
This is in preparation for supporting -debugify-each, which adds a debug
info pass before and after each pass.
Switch VerifyEach to use this.
Reviewed By: ychen
Differential Revision: https://reviews.llvm.org/D88107
Really it should be named print<alias-sets>, but for the sake of
changing fewer tests, added a TODO to rename after NPM switch and test
cleanup.
Reviewed By: ychen
Differential Revision: https://reviews.llvm.org/D87713
'require<globals-aa>' is needed to make globals-aa work in NPM, since
globals-aa is a module analysis but function passes cannot run module
analyses on demand.
So don't skip translating alias analyses to 'require<>'.
Reviewed By: asbirlea
Differential Revision: https://reviews.llvm.org/D87743
D65060 was reverted because it introduced non-determinism by using BFI counts from already freed blocks. The parent of this revision fixes that by using a VH callback on blocks to prevent this from happening and makes sure BFI data is passed correctly in LoopStandardAnalysisResults.
This re-introduces the previous optimization of using BFI data to prevent LICM from hoisting/sinking if the instruction will end up moving to a colder block.
Internally at Facebook this change results in a ~7% win in a CPU related metric in one of our big services by preventing hoisting cold code into a hot pre-header like the added test case demonstrates.
Testing:
ninja check
Reviewed By: asbirlea
Differential Revision: https://reviews.llvm.org/D87551
~~D65060 uncovered that trying to use BFI in loop passes can lead to non-deterministic behavior when blocks are re-used while retaining old BFI data.~~
~~To make sure BFI is preserved through loop passes a Value Handle (VH) callback is registered on blocks themselves. When a block is freed it now also wipes out the accompanying BFI entry such that stale BFI data can no longer persist resolving the determinism issue. ~~
~~An optimistic approach would be to incrementally update BFI information throughout the loop passes rather than only invalidating them on removed blocks. The issues with that are:~~
~~1. It is not clear how BFI information should be incrementally updated: If a block is duplicated does its BFI information come with? How about if it's split/modified/moved around? ~~
~~2. Assuming we can address these problems the implementation here will be a massive undertaking. ~~
~~There's a known need of BFI in LICM analysis which requires correct but not incrementally updated BFI data. A follow-up change can register BFI in all loop passes so this preserved but potentially lossy data is available to any loop pass that wants it.~~
See: D75341 for an identical implementation of preserving BFI via VH callbacks. The previous statements do still apply but this change no longer has to be in this diff because it's already upstream 😄 .
This diff also moves BFI to be a part of LoopStandardAnalysisResults since the previous method using getCachedResults now (correctly!) statically asserts (D72893) that this data isn't static through the loop passes.
Testing
Ninja check
Reviewed By: asbirlea, nikic
Differential Revision: https://reviews.llvm.org/D86156
Was missing MODULE_ALIAS_ANALYSIS, previously only FUNCTION_ALIAS_ANALYSIS was taken into account.
Reviewed By: asbirlea
Differential Revision: https://reviews.llvm.org/D87664
As to not conflict with the legacy PM example passes under
llvm/lib/Transforms/Hello, this is under HelloNew. This makes the
CMakeLists.txt and general directory structure less confusing for people
following the example.
Much of the doc structure was taken from WritinAnLLVMPass.rst.
This adds a HelloWorld pass which simply prints out each function name.
More will follow after this, e.g. passes over different units of IR, analyses.
https://llvm.org/docs/WritingAnLLVMPass.html contains a lot more.
Relanded with missing "Support" dependency in LLVMBuild.txt.
Reviewed By: ychen, asbirlea
Differential Revision: https://reviews.llvm.org/D86979
As to not conflict with the legacy PM example passes under
llvm/lib/Transforms/Hello, this is under HelloNew. This makes the
CMakeLists.txt and general directory structure less confusing for people
following the example.
Much of the doc structure was taken from WritinAnLLVMPass.rst.
This adds a HelloWorld pass which simply prints out each function name.
More will follow after this, e.g. passes over different units of IR, analyses.
https://llvm.org/docs/WritingAnLLVMPass.html contains a lot more.
Reviewed By: ychen, asbirlea
Differential Revision: https://reviews.llvm.org/D86979
This is consistent with the clang option added in
7ed8124d46, and the comments on the
runtime patch in D87120.
Differential Revision: https://reviews.llvm.org/D87622
This patch enables inserting freeze when JumpThreading converts a select to
a conditional branch when it is run in LTO.
Reviewed By: nikic
Differential Revision: https://reviews.llvm.org/D85534
This was reverted in 503deec218
because it caused gigantic increase (3x) in branch mispredictions
in certain benchmarks on certain CPU's,
see https://reviews.llvm.org/D84108#2227365.
It has since been investigated and here are the results:
https://lists.llvm.org/pipermail/llvm-commits/Week-of-Mon-20200907/827578.html
> It's an amazingly severe regression, but it's also all due to branch
> mispredicts (about 3x without this). The code layout looks ok so there's
> probably something else to deal with. I'm not sure there's anything we can
> reasonably do so we'll just have to take the hit for now and wait for
> another code reorganization to make the branch predictor a bit more happy :)
>
> Thanks for giving us some time to investigate and feel free to recommit
> whenever you'd like.
>
> -eric
So let's just reland this.
Original commit message:
I've been looking at missed vectorizations in one codebase.
One particular thing that stands out is that some of the loops
reach vectorizer in a rather mangled form, with weird PHI's,
and some of the loops aren't even in a rotated form.
After taking a more detailed look, that happened because
the loop's headers were too big by then. It is evident that
SimplifyCFG's common code hoisting transform is at fault there,
because the pattern it handles is precisely the unrotated
loop basic block structure.
Surprizingly, `SimplifyCFGOpt::HoistThenElseCodeToIf()` is enabled
by default, and is always run, unlike it's friend, common code sinking
transform, `SinkCommonCodeFromPredecessors()`, which is not enabled
by default and is only run once very late in the pipeline.
I'm proposing to harmonize this, and disable common code hoisting
until //late// in pipeline. Definition of //late// may vary,
here currently i've picked the same one as for code sinking,
but i suppose we could enable it as soon as right after
loop rotation happens.
Experimentation shows that this does indeed unsurprizingly help,
more loops got rotated, although other issues remain elsewhere.
Now, this undoubtedly seriously shakes phase ordering.
This will undoubtedly be a mixed bag in terms of both compile- and
run- time performance, codesize. Since we no longer aggressively
hoist+deduplicate common code, we don't pay the price of said hoisting
(which wasn't big). That may allow more loops to be rotated,
so we pay that price. That, in turn, that may enable all the transforms
that require canonical (rotated) loop form, including but not limited to
vectorization, so we pay that too. And in general, no deduplication means
more [duplicate] instructions going through the optimizations. But there's still
late hoisting, some of them will be caught late.
As per benchmarks i've run {F12360204}, this is mostly within the noise,
there are some small improvements, some small regressions.
One big regression i saw i fixed in rG8d487668d09fb0e4e54f36207f07c1480ffabbfd, but i'm sure
this will expose many more pre-existing missed optimizations, as usual :S
llvm-compile-time-tracker.com thoughts on this:
http://llvm-compile-time-tracker.com/compare.php?from=e40315d2b4ed1e38962a8f33ff151693ed4ada63&to=c8289c0ecbf235da9fb0e3bc052e3c0d6bff5cf9&stat=instructions
* this does regress compile-time by +0.5% geomean (unsurprizingly)
* size impact varies; for ThinLTO it's actually an improvement
The largest fallout appears to be in GVN's load partial redundancy
elimination, it spends *much* more time in
`MemoryDependenceResults::getNonLocalPointerDependency()`.
Non-local `MemoryDependenceResults` is widely-known to be, uh, costly.
There does not appear to be a proper solution to this issue,
other than silencing the compile-time performance regression
by tuning cut-off thresholds in `MemoryDependenceResults`,
at the cost of potentially regressing run-time performance.
D84609 attempts to move in that direction, but the path is unclear
and is going to take some time.
If we look at stats before/after diffs, some excerpts:
* RawSpeed (the target) {F12360200}
* -14 (-73.68%) loops not rotated due to the header size (yay)
* -272 (-0.67%) `"Number of live out of a loop variables"` - good for vectorizer
* -3937 (-64.19%) common instructions hoisted
* +561 (+0.06%) x86 asm instructions
* -2 basic blocks
* +2418 (+0.11%) IR instructions
* vanilla test-suite + RawSpeed + darktable {F12360201}
* -36396 (-65.29%) common instructions hoisted
* +1676 (+0.02%) x86 asm instructions
* +662 (+0.06%) basic blocks
* +4395 (+0.04%) IR instructions
It is likely to be sub-optimal for when optimizing for code size,
so one might want to change tune pipeline by enabling sinking/hoisting
when optimizing for size.
Reviewed By: mkazantsev
Differential Revision: https://reviews.llvm.org/D84108
This reverts commit 503deec218.
This also changes -lint from an analysis to a pass. It's similar to
-verify, and that is a normal pass, and lives in llvm/IR.
Reviewed By: ychen
Differential Revision: https://reviews.llvm.org/D87057
This also changes -lint from an analysis to a pass. It's similar to
-verify, and that is a normal pass, and lives in llvm/IR.
Reviewed By: ychen
Differential Revision: https://reviews.llvm.org/D87057
Since doInitialization() in the legacy pass modifies the module, the NPM
pass is a Module pass.
Reviewed By: ahatanak, ychen
Differential Revision: https://reviews.llvm.org/D86178
See RFC for background:
http://lists.llvm.org/pipermail/llvm-dev/2020-June/142744.html
Note that the runtime changes will be sent separately (hopefully this
week, need to add some tests).
This patch includes the LLVM pass to instrument memory accesses with
either inline sequences to increment the access count in the shadow
location, or alternatively to call into the runtime. It also changes
calls to memset/memcpy/memmove to the equivalent runtime version.
The pass is modeled on the address sanitizer pass.
The clang changes add the driver option to invoke the new pass, and to
link with the upcoming heap profiling runtime libraries.
Currently there is no attempt to optimize the instrumentation, e.g. to
aggregate updates to the same memory allocation. That will be
implemented as follow on work.
Differential Revision: https://reviews.llvm.org/D85948
As disscussed in post-commit review starting with
https://reviews.llvm.org/D84108#2227365
while this appears to be mostly a win overall, especially code-size-wise,
this appears to shake //certain// code pattens in a way that is extremely
unfavorable for performance (+30% runtime regression)
on certain CPU's (i personally can't reproduce).
So until the behaviour is better understood, and a path forward is mapped,
let's back this out for now.
This reverts commit 1d51dc38d8.
I've been looking at missed vectorizations in one codebase.
One particular thing that stands out is that some of the loops
reach vectorizer in a rather mangled form, with weird PHI's,
and some of the loops aren't even in a rotated form.
After taking a more detailed look, that happened because
the loop's headers were too big by then. It is evident that
SimplifyCFG's common code hoisting transform is at fault there,
because the pattern it handles is precisely the unrotated
loop basic block structure.
Surprizingly, `SimplifyCFGOpt::HoistThenElseCodeToIf()` is enabled
by default, and is always run, unlike it's friend, common code sinking
transform, `SinkCommonCodeFromPredecessors()`, which is not enabled
by default and is only run once very late in the pipeline.
I'm proposing to harmonize this, and disable common code hoisting
until //late// in pipeline. Definition of //late// may vary,
here currently i've picked the same one as for code sinking,
but i suppose we could enable it as soon as right after
loop rotation happens.
Experimentation shows that this does indeed unsurprizingly help,
more loops got rotated, although other issues remain elsewhere.
Now, this undoubtedly seriously shakes phase ordering.
This will undoubtedly be a mixed bag in terms of both compile- and
run- time performance, codesize. Since we no longer aggressively
hoist+deduplicate common code, we don't pay the price of said hoisting
(which wasn't big). That may allow more loops to be rotated,
so we pay that price. That, in turn, that may enable all the transforms
that require canonical (rotated) loop form, including but not limited to
vectorization, so we pay that too. And in general, no deduplication means
more [duplicate] instructions going through the optimizations. But there's still
late hoisting, some of them will be caught late.
As per benchmarks i've run {F12360204}, this is mostly within the noise,
there are some small improvements, some small regressions.
One big regression i saw i fixed in rG8d487668d09fb0e4e54f36207f07c1480ffabbfd, but i'm sure
this will expose many more pre-existing missed optimizations, as usual :S
llvm-compile-time-tracker.com thoughts on this:
http://llvm-compile-time-tracker.com/compare.php?from=e40315d2b4ed1e38962a8f33ff151693ed4ada63&to=c8289c0ecbf235da9fb0e3bc052e3c0d6bff5cf9&stat=instructions
* this does regress compile-time by +0.5% geomean (unsurprizingly)
* size impact varies; for ThinLTO it's actually an improvement
The largest fallout appears to be in GVN's load partial redundancy
elimination, it spends *much* more time in
`MemoryDependenceResults::getNonLocalPointerDependency()`.
Non-local `MemoryDependenceResults` is widely-known to be, uh, costly.
There does not appear to be a proper solution to this issue,
other than silencing the compile-time performance regression
by tuning cut-off thresholds in `MemoryDependenceResults`,
at the cost of potentially regressing run-time performance.
D84609 attempts to move in that direction, but the path is unclear
and is going to take some time.
If we look at stats before/after diffs, some excerpts:
* RawSpeed (the target) {F12360200}
* -14 (-73.68%) loops not rotated due to the header size (yay)
* -272 (-0.67%) `"Number of live out of a loop variables"` - good for vectorizer
* -3937 (-64.19%) common instructions hoisted
* +561 (+0.06%) x86 asm instructions
* -2 basic blocks
* +2418 (+0.11%) IR instructions
* vanilla test-suite + RawSpeed + darktable {F12360201}
* -36396 (-65.29%) common instructions hoisted
* +1676 (+0.02%) x86 asm instructions
* +662 (+0.06%) basic blocks
* +4395 (+0.04%) IR instructions
It is likely to be sub-optimal for when optimizing for code size,
so one might want to change tune pipeline by enabling sinking/hoisting
when optimizing for size.
Reviewed By: mkazantsev
Differential Revision: https://reviews.llvm.org/D84108
(This reverts commit a5e0194709, and
corrects author).
Rename the pass to be able to extend it to function properties other than inliner features.
Reviewed By: mtrofin
Differential Revision: https://reviews.llvm.org/D82044
Rename the pass to be able to extend it to function properties other than inliner features.
Reviewed By: mtrofin
Differential Revision: https://reviews.llvm.org/D82044
Pass LowerMatrixIntrinsics wasn't running yet running under the new pass
manager, and this adds LowerMatrixIntrinsics to the pipeline (to the
same place as where it is running in the old PM).
Differential Revision: https://reviews.llvm.org/D84180
Common code sinking is already guarded with a (with default-off!) flag,
so add a flag for hoisting, too.
D84108 will hopefully make hoisting off-by-default too.
Currently, when parsing text pipeline, different kinds of passes always
introduce nested pass managers. This makes it impossible to test the
adaptor-wrapped user passes from the text pipeline interface which is needed
by D82344 test cases. This also seems useful in general. See comments above
`parsePassPipeline`.
The syntax would be like mixing passes of different types, but it is
not the same as inferring the correct pass type and then adding the
matching nested pass managers. Strictly speaking, the resulted pipelines
are different.
Reviewed By: asbirlea, aeubanks
Differential Revision: https://reviews.llvm.org/D82698
This restores commit 80d0a137a5, and the
follow on fix in 873c0d0786, with a new
fix for test failures after a 2-stage clang bootstrap, and a more robust
fix for the Chromium build failure that an earlier version partially
fixed. See also discussion on D75201.
Reviewers: evgeny777
Subscribers: mehdi_amini, Prazek, hiraditya, steven_wu, dexonsmith, arphaman, davidxl, cfe-commits, llvm-commits
Tags: #clang, #llvm
Differential Revision: https://reviews.llvm.org/D73242
This reverts commit 9908a3b9f5.
The fix was to exclude the content of TFUtils.h (automatically
included in the LLVM_Analysis module, when LLVM_ENABLE_MODULES is enabled).
Differential Revision: https://reviews.llvm.org/D82817
Summary:
This is an experimental ML-based native size estimator, necessary for
computing partial rewards during -Oz inliner policy training. Data
extraction for model training will be provided in a separate patch.
RFC: http://lists.llvm.org/pipermail/llvm-dev/2020-April/140763.html
Reviewers: davidxl, jdoerfert
Subscribers: mgorny, hiraditya, mgrang, arphaman, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D82817
PassInfoMixin should be used for all NPM passes, rater than a custom
`name()`.
This caused ambiguous references in LegacyPassManager.cpp, so had to
remove "using namespace llvm::legacy" and move some things around.
Reviewed By: ychen, asbirlea
Differential Revision: https://reviews.llvm.org/D83498
PassInfoMixin should be used for all NPM passes, rater than a custom
`name()`.
This caused ambiguous references in LegacyPassManager.cpp, so had to
remove "using namespace llvm::legacy" and move some things around.
The passes had to be moved to the llvm namespace, or else they would get
printed as "(anonymous namespace)::FooPass".
Reviewed By: ychen, asbirlea
Differential Revision: https://reviews.llvm.org/D83498
Summary:
Old PM runs SpeculativeExecutionPass for targets that have divergent branches.
It uses `createSpeculativeExecutionIfHasBranchDivergencePass` that creates
the pass with `OnlyIfDivergentTarget=true`, whereas new PM just created the
pass with default `OnlyIfDivergentTarget=fase` so it unexpectedly runs and
causes buildbot test fails.
Reviewers: chandlerc, arsenm
Reviewed By: arsenm
Subscribers: wdng, hiraditya, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D82735
Is teaching the LoopFullUnrollPass to preserve MemorySSA very hard or
just impossible?
Reviewed By: asbirlea
Differential Revision: https://reviews.llvm.org/D82618
Summary:
This somewhat matches the --aa-pipeline option, which separates out any
AA analyses to make sure they run before other passes.
Makes check-llvm failures under new PM go from 2356 -> 2303.
AA passes are not handled by PassBuilder::parsePassPipeline() but rather
PassBuilder::parseAAPipeline(), which is why this fixes some failures.
Reviewers: asbirlea, hans, ychen, leonardchan
Subscribers: hiraditya, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D82488
The dependency was introduced in
5134020ea6. The only functional change
from this removal would be the new PM interface for the two codegen
passes. This is not necessary since we don't have codegen pipeline using
new PM yet. This removal is to break the potential circular dependency between
Passes and CodeGen once the codegen begins to gain new PM support.
Summary:
Extend StackLifetime with option to calculate liveliness
where alloca is only considered alive on basic block entry
if all non-dead predecessors had it alive at terminators.
Depends on D82043.
Reviewers: eugenis
Reviewed By: eugenis
Subscribers: hiraditya, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D82124
The initial intent was to organize ML stuff in its own directory, but
it turns out that conflicts with llvm component layering policies: it
is not a component, because subsequent changes want to rely on other
analyses, which would create a cycle; and we don't have a reliable,
cross-platform mechanism to compile files in a subdirectory, and fit in
the existing LLVM build structure.
This change moves the files into Analysis, and subsequent changes will
leverage conditional compilation for those that have optional
dependencies.
Summary:
Experiments show that inline deferral past pre-inlining slightly
pessimizes the performance.
This patch introduces an option to control inline deferral during PGO.
The option defaults to true for now (that is, NFC).
Reviewers: davidxl
Reviewed By: davidxl
Subscribers: eraman, hiraditya, haicheng, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D80776
Last we looked at this and couldn't come up with a reason to change
it, but with a pragma for full loop unrolling we bypass every other
loop unroll and then fail to fully unroll a loop when the pragma is set.
Move the OnlyWhenForced out of the check and into the initialization
of the full unroll pass in the new pass manager. This doesn't show up
with the old pass manager.
Add a new option to opt so that we can turn off loop unrolling
manually since this is a difference between clang and opt.
Tested with check-clang and check-llvm.
Gulfem Savrun Yeniceri