This patch improves https://reviews.llvm.org/D76971 (Deduce attributes for aligned_alloc in InstCombine) and implements "TODO" item mentioned in the review of that patch.
> The function aligned_alloc() is the same as memalign(), except for the added restriction that size should be a multiple of alignment.
Currently, we simply bail out if we see a non-constant size - change that.
Reviewed By: jdoerfert
Differential Revision: https://reviews.llvm.org/D100785
D24453 enabled libcalls simplication for ARM PCS. This may cause
caller/callee calling conventions mismatch in some situations such as
LTO. This patch makes instcombine aware that the compatible calling
conventions differences are benign (not emitting undef idom).
Differential Revision: https://reviews.llvm.org/D99773
As suggested in the review thread for 5094e12 and seen in the
motivating example from https://llvm.org/PR49885, it's not
clear if we have a way to create the optimal code without
this heuristic.
Follow up to a6d2a8d6f5. This covers all the public interfaces of the bundle related code. I tried to cleanup the internals where the changes were obvious, but there's definitely more room for improvement.
Add the subclass, update a few places which check for the intrinsic to use idiomatic dyn_cast, and update the public interface of AssumptionCache to use the new class. A follow up change will do the same for the newer assumption query/bundle mechanisms.
This is discussed in https://llvm.org/PR48999 ,
but it does not solve that request.
The difference in the vector test shows that some
other logic transform is limited to scalar types.
This is another step towards parity between existing select
transforms and min/max intrinsics (D98152)..
The existing 'not' folds around select are complicated, so
it's likely that we will need to enhance this, but this
should be a safe step.
This is a partial translation of the existing select-based
folds. We need to recreate several different transforms to
avoid regressions as noted in D98152.
https://alive2.llvm.org/ce/z/teuZ_J
For logical or/and reductions we emit regular intrinsics @llvm.vector.reduce.or/and.vxi1 calls.
These intrinsics are not effective for the logical or/and reductions,
especially if the optimizer is able to emit short circuit versions of
the scalar or/and instructions and vector code gets less effective than
the scalar version.
Instead, or reduction for i1 can be represented as:
```
%val = bitcast <ReduxWidth x i1> to iReduxWidth
%res = cmp ne iReduxWidth %val, 0
```
and reduction for i1 can be represented as:
```
%val = bitcast <ReduxWidth x i1> to iReduxWidth
%res = cmp eq iReduxWidth %val, 11111
```
This improves perfromance of the vector code significantly and make it
to outperform short circuit scalar code.
Part of D57059.
Differential Revision: https://reviews.llvm.org/D97406
statepoint intrinsic can be used in invoke context,
so it should be handled in visitCallBase to cover both call and invoke.
Reviewers: reames, dantrushin
Reviewed By: reames
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D97833
We can always look through single-argument (LCSSA) phi nodes when
performing alias analysis. getUnderlyingObject() already does this,
but stripPointerCastsAndInvariantGroups() does not. We still look
through these phi nodes with the usual aliasPhi() logic, but
sometimes get sub-optimal results due to the restrictions on value
equivalence when looking through arbitrary phi nodes. I think it's
generally beneficial to keep the underlying object logic and the
pointer cast stripping logic in sync, insofar as it is possible.
With this patch we get marginally better results:
aa.NumMayAlias | 5010069 | 5009861
aa.NumMustAlias | 347518 | 347674
aa.NumNoAlias | 27201336 | 27201528
...
licm.NumPromoted | 1293 | 1296
I've renamed the relevant strip method to stripPointerCastsForAliasAnalysis(),
as we're past the point where we can explicitly spell out everything
that's getting stripped.
Differential Revision: https://reviews.llvm.org/D96668
Instcombine will convert the nonnull and alignment assumption that use the boolean condtion
to an assumption that uses the operand bundles when knowledge retention is enabled.
Differential Revision: https://reviews.llvm.org/D82703
Instcombine will convert the nonnull and alignment assumption that use the boolean condtion
to an assumption that uses the operand bundles when knowledge retention is enabled.
Differential Revision: https://reviews.llvm.org/D82703
The constant trunc/ext may not be the optimal pre-condition,
but I think that handles the common cases.
Example of Alive2 proof:
https://alive2.llvm.org/ce/z/sREeLC
This is another step towards canonicalizing to the intrinsics.
Narrowing was identified as source of potential regression for
abs(), so we need to handle this for min/max - see:
https://llvm.org/PR48816
If this is not enough, we could process intrinsics in
the trunc-driven matching in canEvaluateTruncated().
We can sink extends after min/max if they match and would
not change the sign-interpreted compare. The only combo
that doesn't work is zext+smin/smax because the zexts
could change a negative number into positive:
https://alive2.llvm.org/ce/z/D6sz6J
Sext+umax/umin works:
define i32 @src(i8 %x, i8 %y) {
%0:
%sx = sext i8 %x to i32
%sy = sext i8 %y to i32
%m = umax i32 %sx, %sy
ret i32 %m
}
=>
define i32 @tgt(i8 %x, i8 %y) {
%0:
%m = umax i8 %x, %y
%r = sext i8 %m to i32
ret i32 %r
}
Transformation seems to be correct!
In the motivating cases from https://llvm.org/PR48816 ,
we have a trailing trunc. But that is not required to
reduce the abs width:
https://alive2.llvm.org/ce/z/ECaz-p
...as long as we clear the int-min-is-poison bit (nsw).
We have some existing tests that are affected, and I'm
not sure what the overall implications are, but in general
we favor narrowing operations over preserving nsw/nuw.
If that causes problems, we could restrict this transform
based on type (shouldChangeType() and/or vector vs. scalar).
Differential Revision: https://reviews.llvm.org/D95235
As mentioned in D93793, there are quite a few places where unary `IRBuilder::CreateShuffleVector(X, Mask)` can be used
instead of `IRBuilder::CreateShuffleVector(X, Undef, Mask)`.
Let's update them.
Actually, it would have been more natural if the patches were made in this order:
(1) let them use unary CreateShuffleVector first
(2) update IRBuilder::CreateShuffleVector to use poison as a placeholder value (D93793)
The order is swapped, but in terms of correctness it is still fine.
Reviewed By: spatel
Differential Revision: https://reviews.llvm.org/D93923
This commit adds two new intrinsics.
- llvm.experimental.vector.insert: used to insert a vector into another
vector starting at a given index.
- llvm.experimental.vector.extract: used to extract a subvector from a
larger vector starting from a given index.
The codegen work for these intrinsics has already been completed; this
commit is simply exposing the existing ISD nodes to LLVM IR.
Reviewed By: cameron.mcinally
Differential Revision: https://reviews.llvm.org/D91362
The following constraints hold for swifterror values:
A swifterror value (either the parameter or the alloca) can only
be loaded and stored from, or used as a swifterror argument.
This patch updates instcombine to not try to convert a bitcast of a
function into a bitcast of a swifterror argument.
Reviewed By: rjmccall
Differential Revision: https://reviews.llvm.org/D90258
This reverts commit 25a97c3a43.
We have other constant folds that fold undef funnel shift amounts to 0 - so we need to be consistent.
If we end up with regressions where we lose a splat shift amount pattern we'll have to investigate other canonicalizations, but matchFunnelShift currently protects us from that.
By always performing a modulo on the shift amount constants this was causing undef amounts being replaced with zero, meaning we were losing funnel shift by splat (with undef) patterns.
Tweaked the shift amount bounds check to support (passthrough) undefs, and use Constant::mergeUndefsWith to preserve the undefs after folding.
I think we initially made this fold conservative to be safer, but we do not
need the alignment attribute/metadata limitation because the masked load
intrinsic itself specifies the alignment. A normal vector load is better for
IR transforms and should be no worse in codegen than the masked alternative.
If it is worse for some target, the backend can reverse this transform.
Differential Revision: https://reviews.llvm.org/D88505
NOTE: There is a mailing list discussion on this: http://lists.llvm.org/pipermail/llvm-dev/2019-December/137632.html
Complemantary to the assumption outliner prototype in D71692, this patch
shows how we could simplify the code emitted for an alignemnt
assumption. The generated code is smaller, less fragile, and it makes it
easier to recognize the additional use as a "assumption use".
As mentioned in D71692 and on the mailing list, we could adopt this
scheme, and similar schemes for other patterns, without adopting the
assumption outlining.
Bail from maskIsAllZeroOrUndef and maskIsAllOneOrUndef prior to iterating over the number of
elements for scalable vectors.
Assert that the mask type is not scalable in possiblyDemandedEltsInMask .
Assert that the types are correct in all three functions.
Reviewed By: efriedma
Differential Revision: https://reviews.llvm.org/D87424
If we know that the abs operand is known negative, we can replace
it with a neg.
To avoid computing known bits twice, I've removed the fold for the
non-negative case from InstSimplify. Both the non-negative and the
negative case are handled by InstCombine now, with one known bits call.
Differential Revision: https://reviews.llvm.org/D87196
Similar to D87168, but for abs. If we have a dominating x >= 0
condition, then we know that abs(x) is x. This fold is in
InstCombine, because we need to create a sub instruction for
the x < 0 case.
Differential Revision: https://reviews.llvm.org/D87184
Similar to the existing transform - peek through a select
to match a value and its negation.
https://alive2.llvm.org/ce/z/MXi5KG
define i8 @src(i1 %b, i8 %x) {
%0:
%neg = sub i8 0, %x
%sel = select i1 %b, i8 %x, i8 %neg
%abs = abs i8 %sel, 1
ret i8 %abs
}
=>
define i8 @tgt(i1 %b, i8 %x) {
%0:
%abs = abs i8 %x, 1
ret i8 %abs
}
Transformation seems to be correct!
If some of gc live value are not used in gc.relocate we can remove them
from gc-live bundle of statepoint instruction.
Also the CL removes duplicated Values in gc-live bundle.
Reviewers: reames, dantrushin
Reviewed By: dantrushin
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D85959
The only def for gc.relocate is a gc.statepoint. But real dependency is not
described by def-use chain. Instead this dependency is encoded by indecies
of operands in gc-live bundle of statepoint as integer constants in gc.relocate.
InstCombine operates by def-use chain. As a result when value in gc-live bundle
is simplified the gc.statepoint itself is not simplified but it might simplify dependent
gc.relocates. To trigger the optimization of gc.relocate we now unconditionally trigger
check of all dependent gc.relocates by adding them to worklist.
This CL handles of gc.relocates as process of gc.statepoint optimization considering
gc.statepoint and related gc.relocate as whole entity.
Reviewers: reames, dantrushin
Reviewed By: reames
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D85954
InstCombine adds users of transformed instruction to working list to
process on the same iteration. However gc.relocate may have a hidden
user (next gc.relocate) which is connected through gc.statepoint intrinsic and
there is no direct def-use chain between them.
In this case if the next gc.relocation is already processed it will not be added
to worklist and will not be able to be processed on the same iteration.
Let's we have the following case:
A = gc.relocate(null)
B = statepoint(A)
C = gc.relocate(B, hidden(A))
If C is already considered then after replacement of A with null, statepoint B
instruction will be added to the queue but not C.
C can be processed only on the next iteration.
If the chain of relocation is pretty long the many iteration may be required.
This change is to reduce the number of iteration to meet the latest changes
related to reducing infinite loop threshold.
This is a quick (not best) fix. In the follow up patches I plan to move gc relocation
handling into statepoint handler. This should also help to remove unused gc live
entries in statepoint bundle.
Reviewers: reames, dantrushin
Reviewed By: reames
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D75598
Negating the input doesn't matter. I left a FIXME to copy the nsw flag if its present on the neg but not on the abs.
Reviewed By: nikic
Differential Revision: https://reviews.llvm.org/D85055
For a long time, the InstCombine pass handled target specific
intrinsics. Having target specific code in general passes was noted as
an area for improvement for a long time.
D81728 moves most target specific code out of the InstCombine pass.
Applying the target specific combinations in an extra pass would
probably result in inferior optimizations compared to the current
fixed-point iteration, therefore the InstCombine pass resorts to newly
introduced functions in the TargetTransformInfo when it encounters
unknown intrinsics.
The patch should not have any effect on generated code (under the
assumption that code never uses intrinsics from a foreign target).
This introduces three new functions:
TargetTransformInfo::instCombineIntrinsic
TargetTransformInfo::simplifyDemandedUseBitsIntrinsic
TargetTransformInfo::simplifyDemandedVectorEltsIntrinsic
A few target specific parts are left in the InstCombine folder, where
it makes sense to share code. The largest left-over part in
InstCombineCalls.cpp is the code shared between arm and aarch64.
This allows to move about 3000 lines out from InstCombine to the targets.
Differential Revision: https://reviews.llvm.org/D81728
Summary:
NOTE: There is a mailing list discussion on this: http://lists.llvm.org/pipermail/llvm-dev/2019-December/137632.html
Complemantary to the assumption outliner prototype in D71692, this patch
shows how we could simplify the code emitted for an alignemnt
assumption. The generated code is smaller, less fragile, and it makes it
easier to recognize the additional use as a "assumption use".
As mentioned in D71692 and on the mailing list, we could adopt this
scheme, and similar schemes for other patterns, without adopting the
assumption outlining.
Reviewers: hfinkel, xbolva00, lebedev.ri, nikic, rjmccall, spatel, jdoerfert, sstefan1
Reviewed By: jdoerfert
Subscribers: thopre, yamauchi, kuter, fhahn, merge_guards_bot, hiraditya, bollu, rkruppe, cfe-commits, llvm-commits
Tags: #clang, #llvm
Differential Revision: https://reviews.llvm.org/D71739
Assume bundle can have more than one entry with the same name,
but at least AlignmentFromAssumptionsPass::extractAlignmentInfo() uses
getOperandBundle("align"), which internally assumes that it isn't the
case, and happily crashes otherwise.
Minimal reduced reproducer: run `opt -alignment-from-assumptions` on
target datalayout = "e-m:e-p270:32:32-p271:32:32-p272:64:64-i64:64-f80:128-n8:16:32:64-S128"
target triple = "x86_64-unknown-linux-gnu"
%0 = type { i64, %1*, i8*, i64, %2, i32, %3*, i8* }
%1 = type opaque
%2 = type { i8, i8, i16 }
%3 = type { i32, i32, i32, i32 }
; Function Attrs: nounwind
define i32 @f(%0* noalias nocapture readonly %arg, %0* noalias %arg1) local_unnamed_addr #0 {
bb:
call void @llvm.assume(i1 true) [ "align"(%0* %arg, i64 8), "align"(%0* %arg1, i64 8) ]
ret i32 0
}
; Function Attrs: nounwind willreturn
declare void @llvm.assume(i1) #1
attributes #0 = { nounwind "reciprocal-estimates"="none" }
attributes #1 = { nounwind willreturn }
This is what we'd have with -mllvm -enable-knowledge-retention
This reverts commit c95ffadb24.
If the addend of the fma is zero, common sense would suggest that we can
convert fma x, y, 0.0 to fmul x, y. This comes up with some user code
that was expecting the first fma in an unrolled loop to simplify to a
fmul.
Floating point often does not follow naive common sense though. Alive
suggests that this should be guarded by nsz (as fadd -0.0, 0.0 = 0.0).
fma x, y, -0.0 is always valid.
Differential Revision: https://reviews.llvm.org/D82778
Summary:
NOTE: There is a mailing list discussion on this: http://lists.llvm.org/pipermail/llvm-dev/2019-December/137632.html
Complemantary to the assumption outliner prototype in D71692, this patch
shows how we could simplify the code emitted for an alignemnt
assumption. The generated code is smaller, less fragile, and it makes it
easier to recognize the additional use as a "assumption use".
As mentioned in D71692 and on the mailing list, we could adopt this
scheme, and similar schemes for other patterns, without adopting the
assumption outlining.
Reviewers: hfinkel, xbolva00, lebedev.ri, nikic, rjmccall, spatel, jdoerfert, sstefan1
Reviewed By: jdoerfert
Subscribers: yamauchi, kuter, fhahn, merge_guards_bot, hiraditya, bollu, rkruppe, cfe-commits, llvm-commits
Tags: #clang, #llvm
Differential Revision: https://reviews.llvm.org/D71739
Remove the function Instruction::setProfWeight() and make
use of Instruction::copyMetadata(.., {LLVMContext::MD_prof}).
This is correct for all use cases of setProfWeight() as it
is applied to CallBase instructions only.
This change results in prof metadata copied intact even if
the source has "VP". The old pair of calls
extractProfTotalWeight() + setProfWeight() resulted in
setting branch_weights if the source had "VP" data.
Reviewers: yamauchi, davidxl
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D80987
Now that all of the statepoint related routines have classes with isa support, let's cleanup.
I'm leaving the (dead) utitilities in tree for a few days so that I can do the same cleanup downstream without breakage.
This intrinsic implements IEEE-754 operation roundToIntegralTiesToEven,
and performs rounding to the nearest integer value, rounding halfway
cases to even. The intrinsic represents the missed case of IEEE-754
rounding operations and now llvm provides full support of the rounding
operations defined by the standard.
Differential Revision: https://reviews.llvm.org/D75670
We have to assume undef could be an snan, which would need quieting so
returning qnan is safer than undef. Also consider strictfp, and don't
care if the result rounded.
This really belongs in InstructionSimplify since it doesn't introduce
new instructions. Put it in instcombine to avoid increasing the number
of passes considering target intrinsics.
I also noticed that we seem to now be interpreting strictfp attributes
on call sites, so try to handle that.
See https://reviews.llvm.org/D74651 for the preallocated IR constructs
and LangRef changes.
In X86TargetLowering::LowerCall(), if a call is preallocated, record
each argument's offset from the stack pointer and the total stack
adjustment. Associate the call Value with an integer index. Store the
info in X86MachineFunctionInfo with the integer index as the key.
This adds two new target independent ISDOpcodes and two new target
dependent Opcodes corresponding to @llvm.call.preallocated.{setup,arg}.
The setup ISelDAG node takes in a chain and outputs a chain and a
SrcValue of the preallocated call Value. It is lowered to a target
dependent node with the SrcValue replaced with the integer index key by
looking in X86MachineFunctionInfo. In
X86TargetLowering::EmitInstrWithCustomInserter() this is lowered to an
%esp adjustment, the exact amount determined by looking in
X86MachineFunctionInfo with the integer index key.
The arg ISelDAG node takes in a chain, a SrcValue of the preallocated
call Value, and the arg index int constant. It produces a chain and the
pointer fo the arg. It is lowered to a target dependent node with the
SrcValue replaced with the integer index key by looking in
X86MachineFunctionInfo. In
X86TargetLowering::EmitInstrWithCustomInserter() this is lowered to a
lea of the stack pointer plus an offset determined by looking in
X86MachineFunctionInfo with the integer index key.
Force any function containing a preallocated call to use the frame
pointer.
Does not yet handle a setup without a call, or a conditional call.
Does not yet handle musttail. That requires a LangRef change first.
Tried to look at all references to inalloca and see if they apply to
preallocated. I've made preallocated versions of tests testing inalloca
whenever possible and when they make sense (e.g. not alloca related,
inalloca edge cases).
Aside from the tests added here, I checked that this codegen produces
correct code for something like
```
struct A {
A();
A(A&&);
~A();
};
void bar() {
foo(foo(foo(foo(foo(A(), 4), 5), 6), 7), 8);
}
```
by replacing the inalloca version of the .ll file with the appropriate
preallocated code. Running the executable produces the same results as
using the current inalloca implementation.
Reverted due to unexpectedly passing tests, added REQUIRES: asserts for reland.
Subscribers: hiraditya, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D77689
See https://reviews.llvm.org/D74651 for the preallocated IR constructs
and LangRef changes.
In X86TargetLowering::LowerCall(), if a call is preallocated, record
each argument's offset from the stack pointer and the total stack
adjustment. Associate the call Value with an integer index. Store the
info in X86MachineFunctionInfo with the integer index as the key.
This adds two new target independent ISDOpcodes and two new target
dependent Opcodes corresponding to @llvm.call.preallocated.{setup,arg}.
The setup ISelDAG node takes in a chain and outputs a chain and a
SrcValue of the preallocated call Value. It is lowered to a target
dependent node with the SrcValue replaced with the integer index key by
looking in X86MachineFunctionInfo. In
X86TargetLowering::EmitInstrWithCustomInserter() this is lowered to an
%esp adjustment, the exact amount determined by looking in
X86MachineFunctionInfo with the integer index key.
The arg ISelDAG node takes in a chain, a SrcValue of the preallocated
call Value, and the arg index int constant. It produces a chain and the
pointer fo the arg. It is lowered to a target dependent node with the
SrcValue replaced with the integer index key by looking in
X86MachineFunctionInfo. In
X86TargetLowering::EmitInstrWithCustomInserter() this is lowered to a
lea of the stack pointer plus an offset determined by looking in
X86MachineFunctionInfo with the integer index key.
Force any function containing a preallocated call to use the frame
pointer.
Does not yet handle a setup without a call, or a conditional call.
Does not yet handle musttail. That requires a LangRef change first.
Tried to look at all references to inalloca and see if they apply to
preallocated. I've made preallocated versions of tests testing inalloca
whenever possible and when they make sense (e.g. not alloca related,
inalloca edge cases).
Aside from the tests added here, I checked that this codegen produces
correct code for something like
```
struct A {
A();
A(A&&);
~A();
};
void bar() {
foo(foo(foo(foo(foo(A(), 4), 5), 6), 7), 8);
}
```
by replacing the inalloca version of the .ll file with the appropriate
preallocated code. Running the executable produces the same results as
using the current inalloca implementation.
Subscribers: hiraditya, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D77689
This is D77454, except for stores. All the infrastructure work was done
for loads, so the remaining changes necessary are relatively small.
Differential Revision: https://reviews.llvm.org/D79968
The fact that loads and stores can have the alignment missing is a
constant source of confusion: code that usually works can break down in
rare cases. So fix the LoadInst API so the alignment is never missing.
To reduce the number of changes required to make this work, IRBuilder
and certain LoadInst constructors will grab the module's datalayout and
compute the alignment automatically. This is the same alignment
instcombine would eventually apply anyway; we're just doing it earlier.
There's a minor risk that the way we're retrieving the datalayout
could break out-of-tree code, but I don't think that's likely.
This is the last in a series of patches, so most of the necessary
changes have already been merged.
Differential Revision: https://reviews.llvm.org/D77454
Summary:
Remove incorrect usage of getNumElements() from visitCallInst(). The
number of elements was being used to construct a DemandedElts bitfield.
This operation does not make sense for scalable vectors. Cast to
FixedVectorType
Identified by test case Clang :: CodeGen/aarch64-sve-intrinsics/acle_sve_mla.c
Reviewers: rengolin, efriedma, sdesmalen, c-rhodes, david-arm
Reviewed By: david-arm
Subscribers: tschuett, kristof.beyls, hiraditya, rkruppe, psnobl, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D79524
This method has been commented as deprecated for a while. Remove
it and replace all uses with the equivalent getCalledOperand().
I also made a few cleanups in here. For example, to removes use
of getElementType on a pointer when we could just use getFunctionType
from the call.
Differential Revision: https://reviews.llvm.org/D78882
As discussed in PR45478:
https://bugs.llvm.org/show_bug.cgi?id=45478
...propagating FMF from the outer (second) call is not correct,
so intersect them instead.
I suspect we could do better (see TODO comment), but mismatched
FMF is probably too rare to care about.
Differential Revision: https://reviews.llvm.org/D78631
The handling of the `returned` attribute in D75815 did miss the case
where the argument is (bit)casted to a different type. This is
explicitly allowed by the language reference and exposed by the
Attributor.
Reviewed By: lebedev.ri
Differential Revision: https://reviews.llvm.org/D77977
Passing a Value * to CreateCall has to call getPointerElementType
to find the type of the pointer.
In this case we can rely on the fact that Intrinsic::getDeclaration
returns a Function * and use that version of CreateCall.
Summary:
Remove usages of asserting vector getters in Type in preparation for the
VectorType refactor. The existence of these functions complicates the
refactor while adding little value.
Reviewers: sdesmalen, rriddle, efriedma
Reviewed By: sdesmalen
Subscribers: hiraditya, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D77263
Summary:
Splitting Knowledge retention into Queries in Analysis and Builder into Transform/Utils
allows Queries and Transform/Utils to use Analysis.
Reviewers: jdoerfert, sstefan1
Reviewed By: jdoerfert
Subscribers: mgorny, hiraditya, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D77171
Make InstCombine aware of the aligned_alloc library function.
Signed-off-by: Uday Bondhugula <uday@polymagelabs.com>
Depends on D76970.
Differential Revision: https://reviews.llvm.org/D76971
Add a new llvm.amdgcn.ballot intrinsic modeled on the ballot function
in GLSL and other shader languages. It returns a bitfield containing the
result of its boolean argument in all active lanes, and zero in all
inactive lanes.
This is intended to replace the existing llvm.amdgcn.icmp and
llvm.amdgcn.fcmp intrinsics after a suitable transition period.
Use the new intrinsic in the atomic optimizer pass.
Differential Revision: https://reviews.llvm.org/D65088
Two one-use checks were added with rGfdcb27105537,
but only the first one is necessary to limit an
increase in instruction count. The second transform
only creates one instruction, so it is always a
reasonable canonicalization/optimization.
The sll/srl/sra scalar vector shifts can be replaced with generic shifts if the shift amount is known to be in range.
This also required public DemandedElts variants of llvm::computeKnownBits to be exposed (PR36319).
If a call argument has the "returned" attribute, we can simplify
the call to the value of that argument. This was already partially
handled by InstSimplify/InstCombine for the case where the argument
is an integer constant, and the result is thus known via known bits.
The non-constant (or non-int) argument cases weren't handled though.
This previously landed as an InstSimplify transform, but was reverted
due to assertion failures when compiling the Linux kernel. The reason
is that simplifying a call to another call breaks assumptions in
call graph updating during inlining. As the code is not easy to fix,
and there is no particularly strong motivation for having this in
InstSimplify, the transform is only performed in InstCombine instead.
Differential Revision: https://reviews.llvm.org/D75815
If we know the SSE shift amount is out of range then we can simplify to zero value (logical) or a 'signsplat' bitwidth-1 shift (arithmetic). This allows us to remove the equivalent ConstantInt constant folding path from simplifyX86immShift.
The slli/srli/srai 'immediate' vector shifts (although its not immediate anymore to match gcc) can be replaced with generic shifts if the shift amount is known to be in range.
Summary: Prevent InstCombine from removing llvm.assume for which the arguement is true when they have operand bundles with usefull information.
Reviewers: jdoerfert, nikic, lebedev.ri
Reviewed By: jdoerfert
Subscribers: hiraditya, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D76147
According to LangRef:
If len is not a positive integer multiple of element_size, then the behaviour of the intrinsic is undefined.
Add InstCombine rule to transform intrinsic to undef operation.
This is a follow-up for D76116.
Reviewers: reames
Reviewed By: reames
Subscribers: hiraditya, jfb, dantrushin, llvm-commits
Differential Revision: https://reviews.llvm.org/D76215
When simplifying a call without uses, replaceInstUsesWith() is
going to do nothing, but we'll skip all following folds. We can
only run into this problem with calls that both simplify and are
not trivially dead if unused, which currently seems to happen only
with calls to undef, as the test diff shows. When extending
SimplifyCall() to handle "returned" attributes, this becomes a much
bigger problem, so I'm fixing this first.
Differential Revision: https://reviews.llvm.org/D75814
This removes everything but int_x86_avx512_mask_vcvtph2ps_512 which provides the SAE variant, but even this can use the fpext generic if the rounding control is the default.
Differential Revision: https://reviews.llvm.org/D75162
Use UnaryOperator::CreateFNeg instead.
Summary:
With the introduction of the native fneg instruction, the
fsub -0.0, %x idiom is obsolete. This patch makes LLVM
emit fneg instead of the idiom in all places.
Reviewed By: cameron.mcinally
Differential Revision: https://reviews.llvm.org/D75130
InstCombine removes pairs of start+end intrinsics that don't
have anything in between them. Currently this is done by starting
at the start intrinsic and scanning forwards. This patch changes
it to start at the end intrinsic and scan backwards.
The motivation here is as follows: When we process the start
intrinsic, we have not yet looked at the following instructions,
which may still get folded/removed. If they do, we will only be
able to remove the start/end pair on the next iteration. When we
process the end intrinsic, all the instructions before it have
already been visited, and we don't run into this problem.
Differential Revision: https://reviews.llvm.org/D75011
Followup to D73919 with another batch of replacements of
setOperand() -> replaceOperand(), to make sure the old
operand gets DCEd right away.
Differential Revision: https://reviews.llvm.org/D74932
This changes the SimplifyLibCalls utility to accept an IRBuilderBase,
which allows us to pass through the IRBuilder used by InstCombine.
This will ensure that new instructions get added to the worklist.
The annotated test-case drops from 4 to 2 InstCombine iterations thanks
to this.
To achieve this, I'm adding an IRBuilderBase::OperandBundlesGuard,
which is basically the same as the existing InsertPointGuard and
FastMathFlagsGuard, but for operand bundles. Also add a
setDefaultOperandBundles() method so these can be set outside the
constructor.
Differential Revision: https://reviews.llvm.org/D74792
AMDGPU and x86 at least both have separate controls for whether
denormal results are flushed on output, and for whether denormals are
implicitly treated as 0 as an input. The current DAGCombiner use only
really cares about the input treatment of denormals.
Adds a replaceOperand() helper, which is like Instruction.setOperand()
but adds the old operand to the worklist. This reduces the amount of
missing or incorrect worklist management.
This only applies the helper to a relatively small subset of
setOperand() calls in InstCombine, namely those of the pattern
`I.setOperand(); return &I;`, where it is most obviously applicable.
Differential Revision: https://reviews.llvm.org/D73803
This renames Worklist.AddDeferred() to Worklist.add() and
Worklist.Add() to Worklist.push(). The intention here is that
Worklist.add() should be the go-to method for explicit worklist
management, while the raw Worklist.push() is mostly for
InstCombine internals. I will then migrate uses of Worklist.push()
to Worklist.add() in followup changes.
As suggested by spatel on D73411 I'm also changing the remaining
method names to lowercase first character, in line with current
coding standards.
Differential Revision: https://reviews.llvm.org/D73745
Summary:
This is a follow up on https://reviews.llvm.org/D71473#inline-647262.
There's a caveat here that `Align(1)` relies on the compiler understanding of `Log2_64` implementation to produce good code. One could use `Align()` as a replacement but I believe it is less clear that the alignment is one in that case.
Reviewers: xbolva00, courbet, bollu
Subscribers: arsenm, dylanmckay, sdardis, nemanjai, jvesely, nhaehnle, hiraditya, kbarton, jrtc27, atanasyan, jsji, Jim, kerbowa, cfe-commits, llvm-commits
Tags: #clang, #llvm
Differential Revision: https://reviews.llvm.org/D73099
Currently there are 4 different mechanisms for controlling denormal
flushing behavior, and about as many equivalent frontend controls.
- AMDGPU uses the fp32-denormals and fp64-f16-denormals subtarget features
- NVPTX uses the nvptx-f32ftz attribute
- ARM directly uses the denormal-fp-math attribute
- Other targets indirectly use denormal-fp-math in one DAGCombine
- cl-denorms-are-zero has a corresponding denorms-are-zero attribute
AMDGPU wants a distinct control for f32 flushing from f16/f64, and as
far as I can tell the same is true for NVPTX (based on the attribute
name).
Work on consolidating these into the denormal-fp-math attribute, and a
new type specific denormal-fp-math-f32 variant. Only ARM seems to
support the two different flush modes, so this is overkill for the
other use cases. Ideally we would error on the unsupported
positive-zero mode on other targets from somewhere.
Move the logic for selecting the flush mode into the compiler driver,
instead of handling it in cc1. denormal-fp-math/denormal-fp-math-f32
are now both cc1 flags, but denormal-fp-math-f32 is not yet exposed as
a user flag.
-cl-denorms-are-zero, -fcuda-flush-denormals-to-zero and
-fno-cuda-flush-denormals-to-zero will be mapped to
-fp-denormal-math-f32=ieee or preserve-sign rather than the old
attributes.
Stop emitting the denorms-are-zero attribute for the OpenCL flag. It
has no in-tree users. The meaning would also be target dependent, such
as the AMDGPU choice to treat this as only meaning allow flushing of
f32 and not f16 or f64. The naming is also potentially confusing,
since DAZ in other contexts refers to instructions implicitly treating
input denormals as zero, not necessarily flushing output denormals to
zero.
This also does not attempt to change the behavior for the current
attribute. The LangRef now states that the default is ieee behavior,
but this is inaccurate for the current implementation. The clang
handling is slightly hacky to avoid touching the existing
denormal-fp-math uses. Fixing this will be left for a future patch.
AMDGPU is still using the subtarget feature to control the denormal
mode, but the new attribute are now emitted. A future change will
switch this and remove the subtarget features.
When multiple guard intrinsics are merged into one, currently the
result of eraseInstFromFunction() is returned -- however, this
should only be done if the current instruction is being removed.
In this case we're removing a different instruction and should
instead report that the current one has been modified by returning it.
For this test case, this reduces the number of instcombine iterations
from 5 to 2 (the minimum possible).
Differential Revision: https://reviews.llvm.org/D72558
The instructions use a mask to either pack disjoint bits together(pext) or spread bits to disjoint locations(pdep). If the mask is all 0s then no bits are extracted or deposited. If the mask is all ones, then the source value is written to the result since no compression or expansion happens. Otherwise if both the source and mask are constant we can walk the bits in the source/mask and calculate the result.
There other crazier things we could do like computeKnownBits or turning pext into shift/and if only a single contiguous range of bits is extracted.
Fixes PR44389
Differential Revision: https://reviews.llvm.org/D71952
This has two main effects:
- Optimizes debug info size by saving 221.86 MB of obj file size in a
Windows optimized+debug build of 'all'. This is 3.03% of 7,332.7MB of
object file size.
- Incremental step towards decoupling target intrinsics.
The enums are still compact, so adding and removing a single
target-specific intrinsic will trigger a rebuild of all of LLVM.
Assigning distinct target id spaces is potential future work.
Part of PR34259
Reviewers: efriedma, echristo, MaskRay
Reviewed By: echristo, MaskRay
Differential Revision: https://reviews.llvm.org/D71320
Constructor invocations such as `APFloat(APFloat::IEEEdouble(), 0.0)`
may seem like they accept a FP (floating point) value, but the overload
they reach is actually the `integerPart` one, not a `float` or `double`
overload (which only exists when `fltSemantics` isn't passed).
This may lead to possible loss of data, by the conversion from `float`
or `double` to `integerPart`.
To prevent future mistakes, a new constructor overload, which accepts
any FP value and marked with `delete`, to prevent its usage.
Fixes PR34095.
Differential Revision: https://reviews.llvm.org/D70425
Summary:
If a user writing C code using the ACLE MVE intrinsics generates a
predicate and then complements it, then the resulting IR will use the
`pred_v2i` IR intrinsic to turn some `<n x i1>` vector into a 16-bit
integer; complement that integer; and convert back. This will generate
machine code that moves the predicate out of the `P0` register,
complements it in an integer GPR, and moves it back in again.
This InstCombine rule replaces `i2v(~v2i(x))` with a direct complement
of the original predicate vector, which we can already instruction-
select as the VPNOT instruction which complements P0 in place.
Reviewers: ostannard, MarkMurrayARM, dmgreen
Reviewed By: dmgreen
Subscribers: kristof.beyls, hiraditya, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D70484
If the sign of the sign argument is known (this could be extended to use ValueTracking),
then we can use fneg+fabs to clear/set the sign bit of the magnitude argument.
http://llvm.org/docs/LangRef.html#llvm-copysign-intrinsic
This transform is already done in DAGCombiner, but we can do it sooner in IR as
suggested in PR44153:
https://bugs.llvm.org/show_bug.cgi?id=44153
We have effectively no analysis for copysign in IR, so we are taking the unusual step
of increasing the number of IR instructions for the negative constant case.
Differential Revision: https://reviews.llvm.org/D70792
If you're writing C code using the ACLE MVE intrinsics that passes the
result of a vcmp as input to a predicated intrinsic, e.g.
mve_pred16_t pred = vcmpeqq(v1, v2);
v_out = vaddq_m(v_inactive, v3, v4, pred);
then clang's codegen for the compare intrinsic will create calls to
`@llvm.arm.mve.pred.v2i` to convert the output of `icmp` into an
`mve_pred16_t` integer representation, and then the next intrinsic
will call `@llvm.arm.mve.pred.i2v` to convert it straight back again.
This will be visible in the generated code as a `vmrs`/`vmsr` pair
that move the predicate value pointlessly out of `p0` and back into it again.
To prevent that, I've added InstCombine rules to remove round trips of
the form `v2i(i2v(x))` and `i2v(v2i(x))`. Also I've taught InstCombine
about the known and demanded bits of those intrinsics. As a result,
you now get just the generated code you wanted:
vpt.u16 eq, q1, q2
vaddt.u16 q0, q3, q4
Reviewers: ostannard, MarkMurrayARM, dmgreen
Reviewed By: dmgreen
Subscribers: kristof.beyls, hiraditya, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D70313
The MVE VADC instruction reads and writes the carry bit at bit 29 of
the FPSCR register. The corresponding ACLE intrinsic is specified to
work with an integer in which the carry bit is stored at bit 0. So if
a user writes a code sequence in C that passes the carry from one VADC
to the next, like this,
s0 = vadcq_u32(a0, b0, &carry);
s1 = vadcq_u32(a1, b1, &carry);
then clang will generate IR for each of those operations that shifts
the carry bit up into bit 29 before the VADC, and after it, shifts it
back down and masks off all but the low bit. But in this situation
what you really wanted was two consecutive VADC instructions, so that
the second one directly reads the value left in FPSCR by the first,
without wasting several instructions on pointlessly clearing the other
flag bits in between.
This commit explains to InstCombine that the other bits of the flags
operand don't matter, and adds a test that demonstrates that all the
code between the two VADC instructions can be optimized away as a
result.
Reviewers: dmgreen, miyuki, ostannard
Subscribers: kristof.beyls, hiraditya, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D67162
As @reames pointed out post-commit, rL371518 adds additional rounding
in some cases, when doing constant folding of the multiplication.
This breaks a guarantee llvm.fma makes and must be avoided.
This patch reapplies rL371518, but splits off the simplifications not
requiring rounding from SimplifFMulInst as SimplifyFMAFMul.
Reviewers: spatel, lebedev.ri, reames, scanon
Reviewed By: reames
Differential Revision: https://reviews.llvm.org/D67434
llvm-svn: 372899
If we generate the gc.relocate, and then later prove two arguments to the statepoint are equivalent, we should canonicalize the gc.relocate to the form we would have produced if this had been known before rewriting.
llvm-svn: 372771
"Implementations are free to malloc() a buffer containing either (size + 1) bytes or (strnlen(s, size) + 1) bytes. Applications should not assume that strndup() will allocate (size + 1) bytes when strlen(s) is smaller than size."
llvm-svn: 372647
Summary:
Motivation:
- If we can fold it to strdup, we should (strndup does more things than strdup).
- Annotation mechanism. (Works for strdup well).
strdup and strndup are part of C 20 (currently posix fns), so we should optimize them.
Reviewers: efriedma, jdoerfert
Reviewed By: jdoerfert
Subscribers: lebedev.ri, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D67679
llvm-svn: 372636
This allows us to fold fma's that multiply with 0.0. Also, the
multiply by 1.0 case is handled there as well. The fneg/fabs cases
are not handled by SimplifyFMulInst, so we need to keep them.
Reviewers: spatel, anemet, lebedev.ri
Reviewed By: spatel
Differential Revision: https://reviews.llvm.org/D67351
llvm-svn: 371518
Dávid Bolvanský