to reflect the new license.
We understand that people may be surprised that we're moving the header
entirely to discuss the new license. We checked this carefully with the
Foundation's lawyer and we believe this is the correct approach.
Essentially, all code in the project is now made available by the LLVM
project under our new license, so you will see that the license headers
include that license only. Some of our contributors have contributed
code under our old license, and accordingly, we have retained a copy of
our old license notice in the top-level files in each project and
repository.
llvm-svn: 351636
This is outwardly NFC from what I can tell, but it should be more efficient
to simplify first (despite the name, SimplifyAssociativeOrCommutative does
not actually simplify as InstSimplify does - it creates/morphs instructions).
This should make it easier to refactor duplicated code that runs for all binops.
llvm-svn: 335258
Summary:
Related to https://bugs.llvm.org/show_bug.cgi?id=37793, https://reviews.llvm.org/D46760#1127287
We'd like to do this canonicalization https://rise4fun.com/Alive/Gmc
But it is currently restricted by rL155136 / rL155362, which says:
```
// This is a constant shift of a constant shift. Be careful about hiding
// shl instructions behind bit masks. They are used to represent multiplies
// by a constant, and it is important that simple arithmetic expressions
// are still recognizable by scalar evolution.
//
// The transforms applied to shl are very similar to the transforms applied
// to mul by constant. We can be more aggressive about optimizing right
// shifts.
//
// Combinations of right and left shifts will still be optimized in
// DAGCombine where scalar evolution no longer applies.
```
I think these tests show that for *constants*, SCEV has no issues with that canonicalization.
Reviewers: mkazantsev, spatel, efriedma, sanjoy
Reviewed By: mkazantsev
Subscribers: sanjoy, javed.absar, llvm-commits, stoklund, bixia
Differential Revision: https://reviews.llvm.org/D48229
llvm-svn: 335101
Summary:
We already do it for splat constants, but not just values.
Also, undef cases are mostly non-functional.
The original commit was reverted because
it broke tests for amdgpu backend, which i didn't check.
Now, the backed was updated to recognize these new
patterns, so we are good.
https://bugs.llvm.org/show_bug.cgi?id=37603https://rise4fun.com/Alive/cplX
Reviewers: spatel, craig.topper, mareko, bogner, rampitec, nhaehnle, arsenm
Reviewed By: spatel, rampitec, nhaehnle
Subscribers: wdng, nhaehnle, llvm-commits
Differential Revision: https://reviews.llvm.org/D47980
llvm-svn: 334818
As noted in the review thread for rL333782, we could have
made a bug harder to hit if we were simplifying instructions
before trying other folds.
The shuffle transform in question isn't ever a simplification;
it's just a canonicalization. So I've renamed that to make that
clearer.
This is NFCI at this point, but I've regenerated the test file
to show the cosmetic value naming difference of using
instcombine's RAUW vs. the builder.
Possible follow-ups:
1. Move reassociation folds after simplifies too.
2. Refactor common code; we shouldn't have so much repetition.
llvm-svn: 333820
The DEBUG() macro is very generic so it might clash with other projects.
The renaming was done as follows:
- git grep -l 'DEBUG' | xargs sed -i 's/\bDEBUG\s\?(/LLVM_DEBUG(/g'
- git diff -U0 master | ../clang/tools/clang-format/clang-format-diff.py -i -p1 -style LLVM
- Manual change to APInt
- Manually chage DOCS as regex doesn't match it.
In the transition period the DEBUG() macro is still present and aliased
to the LLVM_DEBUG() one.
Differential Revision: https://reviews.llvm.org/D43624
llvm-svn: 332240
Also, rename 'foldOpWithConstantIntoOperand' because that's annoyingly
vague. The constant check is redundant in some cases, but it allows
removing duplication for most of the calls.
llvm-svn: 326329
The hexagon test should be fixed now.
Original commit message:
This pulls shifts through a select+binop with a constant where the select conditionally executes the binop. We already do this for just the binop, but not with the select.
This can allow us to get the select closer to other selects to enable removing one.
Differential Revision: https://reviews.llvm.org/D39222
llvm-svn: 317600
This broke the CodeGen/Hexagon/loop-idiom/pmpy-mod.ll test on a bunch of buildbots.
> This pulls shifts through a select+binop with a constant where the select conditionally executes the binop. We already do this for just the binop, but not with the select.
>
> This can allow us to get the select closer to other selects to enable removing one.
>
> Differential Revision: https://reviews.llvm.org/D39222
>
> git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@317510 91177308-0d34-0410-b5e6-96231b3b80d8
llvm-svn: 317518
This pulls shifts through a select+binop with a constant where the select conditionally executes the binop. We already do this for just the binop, but not with the select.
This can allow us to get the select closer to other selects to enable removing one.
Differential Revision: https://reviews.llvm.org/D39222
llvm-svn: 317510
Narrow ops are better for bit-tracking, and in the case of vectors,
may enable better codegen.
As the trunc test shows, this can allow follow-on simplifications.
There's a block of code in visitTrunc that deals with shifted ops
with FIXME comments. It may be possible to remove some of that now,
but I want to make sure there are no problems with this step first.
http://rise4fun.com/Alive/Y3a
Name: hoist_ashr_ahead_of_sext_1
%s = sext i8 %x to i32
%r = ashr i32 %s, 3 ; shift value is < than source bit width
=>
%a = ashr i8 %x, 3
%r = sext i8 %a to i32
Name: hoist_ashr_ahead_of_sext_2
%s = sext i8 %x to i32
%r = ashr i32 %s, 8 ; shift value is >= than source bit width
=>
%a = ashr i8 %x, 7 ; so clamp this shift value
%r = sext i8 %a to i32
Name: junc_the_trunc
%a = sext i16 %v to i32
%s = ashr i32 %a, 18
%t = trunc i32 %s to i16
=>
%t = ashr i16 %v, 15
llvm-svn: 310942
We already support pulling through an add with constant RHS. We can do the same for subtract.
Differential Revision: https://reviews.llvm.org/D36443
llvm-svn: 310407
Name: narrow_shift
Pre: C1 < 8
%zx = zext i8 %x to i32
%l = lshr i32 %zx, C1
=>
%narrowC = trunc i32 C1 to i8
%ns = lshr i8 %x, %narrowC
%l = zext i8 %ns to i32
http://rise4fun.com/Alive/jIV
This isn't directly applicable to PR34046 as written, but we
need to have more narrowing folds like this to be sure that
rotate patterns are recognized.
llvm-svn: 310060
Previously the InstCombiner class contained a pointer to an IR builder that had been passed to the constructor. Sometimes this would be passed to helper functions as either a pointer or the pointer would be dereferenced to be passed by reference.
This patch makes it a reference everywhere including the InstCombiner class itself so there is more inconsistency. This a large, but mechanical patch. I've done very minimal formatting changes on it despite what clang-format wanted to do.
llvm-svn: 307451
Summary: This matches the behavior we already had for compares and makes us consistent everywhere.
Reviewers: dberlin, hfinkel, spatel
Reviewed By: dberlin
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D33604
llvm-svn: 305049
This was discussed in D33338. We have larger pattern-matching ending in a truncate that
we can reduce or remove by handling these smaller patterns first. Further motivation is
that narrower shift ops are easier for value tracking and zext is better than sext.
http://rise4fun.com/Alive/rhh
Name: boolshift
%sext = sext i1 %x to i8
%r = lshr i8 %sext, 7
=>
%r = zext i1 %x to i8
Name: noboolshift
%sext = sext i3 %x to i8
%r = lshr i8 %sext, 7
=>
%sh = lshr i3 %x, 2
%r = zext i3 %sh to i8
Differential Revision: https://reviews.llvm.org/D33879
llvm-svn: 304939
Every other place in InstCombine that uses these methods in ValueTracking already pass this information. This makes the remaining sites consistent.
Differential Revision: https://reviews.llvm.org/D33567
llvm-svn: 304018
getSignBit is a static function that creates an APInt with only the sign bit set. getSignMask seems like a better name to convey its functionality. In fact several places use it and then store in an APInt named SignMask.
Differential Revision: https://reviews.llvm.org/D32108
llvm-svn: 300856
This patch uses lshrInPlace to replace code where the object that lshr is called on is being overwritten with the result.
This adds an lshrInPlace(const APInt &) version as well.
Differential Revision: https://reviews.llvm.org/D32155
llvm-svn: 300566
This fold already existed for vectors but only when 'C1' was a splat
constant (but 'C2' could be any constant).
There were no tests for any vector constants, so I'm adding a test
that shows non-splat constants for both operands.
llvm-svn: 294650
Although this is 'no-functional-change-intended', I'm adding tests
for shl-shl and lshr-lshr pairs because there is no existing test
coverage for those folds.
It seems like we should be able to remove some code from foldShiftedShift()
at this point because we're handling those patterns on the general path.
llvm-svn: 293814
The original shift is bigger, so this may qualify as 'obvious',
but here's an attempt at an Alive-based proof:
Name: exact
Pre: (C1 u< C2)
%a = shl i8 %x, C1
%b = lshr exact i8 %a, C2
=>
%c = lshr exact i8 %x, C2 - C1
%b = and i8 %c, ((1 << width(C1)) - 1) u>> C2
Optimization is correct!
llvm-svn: 293498
We already have this fold when the lshr has one use, but it doesn't need that
restriction. We may be able to remove some code from foldShiftedShift().
Also, move the similar:
(X << C) >>u C --> X & (-1 >>u C)
...directly into visitLShr to help clean up foldShiftByConstOfShiftByConst().
That whole function seems questionable since it is called by commonShiftTransforms(),
but there's really not much in common if we're checking the shift opcodes for every
fold.
llvm-svn: 293215
We may be able to assert that no shl-shl or lshr-lshr pairs ever get here
because we should have already handled those in foldShiftedShift().
llvm-svn: 292726
It's not clear what 'First' and 'Second' mean, so use 'Inner' and 'Outer'
to match foldShiftedShift() and add comments with formulas, so it's easier
to see what's going on.
llvm-svn: 292153
Chandler Carruth