Add support for the RDPRU instruction on Zen2 processors.
User-facing features:
- Clang option -m[no-]rdpru to enable/disable the feature
- Support is implicit for znver2/znver3 processors
- Preprocessor symbol __RDPRU__ to indicate support
- Header rdpruintrin.h to define intrinsics
- "rdpru" mnemonic supported for assembler code
Internal features:
- Clang builtin __builtin_ia32_rdpru
- IR intrinsic @llvm.x86.rdpru
Differential Revision: https://reviews.llvm.org/D128934
This patch adds support for inline assembly address operands using the "p"
constraint on X86 and SystemZ.
This was in fact broken on X86 (see example at
https://reviews.llvm.org/D110267, Nov 23).
These operands should probably be treated the same as memory operands by
CodeGenPrepare, which have been commented with "TODO" there.
Review: Xiang Zhang and Ulrich Weigand
Differential Revision: https://reviews.llvm.org/D122220
Due to various implementation constraints, despite the programmer
choosing a 'processor' cpu_dispatch/cpu_specific needs to use the
'feature' list of a processor to identify it. This results in the
identified processor in source-code not being propogated to the
optimizer, and thus, not able to be tuned for.
This patch changes to use the actual cpu as written for tune-cpu so that
opt can make decisions based on the cpu-as-spelled, which should better
match the behavior expected by the programmer.
Note that the 'valid' list of processors for x86 is in
llvm/include/llvm/Support/X86TargetParser.def. At the moment, this list
contains only Intel processors, but other vendors may wish to add their
own entries as 'alias'es (or with different feature lists!).
If this is not done, there is two potential performance issues with the
patch, but I believe them to be worth it in light of the improvements to
behavior and performance.
1- In the event that the user spelled "ProcessorB", but we only have the
features available to test for "ProcessorA" (where A is B minus
features),
AND there is an optimization opportunity for "B" that negatively affects
"A", the optimizer will likely choose to do so.
2- In the event that the user spelled VendorI's processor, and the
feature
list allows it to run on VendorA's processor of similar features, AND
there
is an optimization opportunity for VendorIs that negatively affects
"A"s,
the optimizer will likely choose to do so. This can be fixed by adding
an
alias to X86TargetParser.def.
Differential Revision: https://reviews.llvm.org/D121410
We should match GCC's behavior which allows floating-point type for -mno-x87 option on 32-bits. https://godbolt.org/z/KrbhfWc9o
The previous block issues have partially been fixed by D112143.
Reviewed By: asavonic, nickdesaulniers
Differential Revision: https://reviews.llvm.org/D114162
Operations are emulated by software emulation and “float” instructions.
This patch is allowing the support of _Float16 type without the use of
-max512fp16 flag. The final goal being, perform _Float16 emulation for
all arithmetic expressions.
This patch attempts to fix a compiler crash that occurs when long
double type is used with -mno-x87 compiler option.
The option disables x87 target feature, which in turn disables x87
registers, so CG cannot select them for x86_fp80 LLVM IR type. Long
double is lowered as x86_fp80 for some targets, so it leads to a
crash.
The option seems to contradict the SystemV ABI, which requires long
double to be represented as a 80-bit floating point, and it also
requires to use x87 registers.
To avoid that, `long double` type is disabled when -mno-x87 option is
set. In addition to that, `float` and `double` also use x87 registers
for return values on 32-bit x86, so they are disabled as well.
Differential Revision: https://reviews.llvm.org/D98895
d8faf03807 implemented general-regs-only for X86 by disabling all features
with vector instructions. But the CRC32 instruction in SSE4.2 ISA, which uses
only GPRs, also becomes unavailable. This patch adds a CRC32 feature for this
instruction and allows it to be used with general-regs-only.
Reviewed By: pengfei
Differential Revision: https://reviews.llvm.org/D105462
...instead of redeclaring them in clang's own X86Target.def. They were already
required to be in sync (IIUC), so no reason to maintain two identical lists.
Reviewed By: erichkeane, craig.topper
Differential Revision: https://reviews.llvm.org/D108151
Language options are not available when a target is being created,
thus, a new method is introduced. Also, some refactoring is done,
such as removing OpenCL feature macros setting from TargetInfo.
Reviewed By: Anastasia
Differential Revision: https://reviews.llvm.org/D101087
This patch mainly made the following changes:
1. Support AVX-VNNI instructions;
2. Introduce ExplicitVEXPrefix flag so that vpdpbusd/vpdpbusds/vpdpbusds/vpdpbusds instructions only use vex-encoding when user explicity add {vex} prefix.
Differential Revision: https://reviews.llvm.org/D89105
GCC 11 will define this macro.
In LLVM, the feature flag only applies to 64-bit mode and we always define the
macro in 32-bit mode. This is different from GCC -m32 in which -mno-sahf can
suppress the macro. The discrepancy can unlikely cause trouble.
Reviewed By: craig.topper
Differential Revision: https://reviews.llvm.org/D89198
Key Locker provides a mechanism to encrypt and decrypt data with an AES key without having access
to the raw key value by converting AES keys into “handles”. These handles can be used to perform the
same encryption and decryption operations as the original AES keys, but they only work on the current
system and only until they are revoked. If software revokes Key Locker handles (e.g., on a reboot),
then any previous handles can no longer be used.
Reviewed By: craig.topper
Differential Revision: https://reviews.llvm.org/D88398
Support -march=sapphirerapids for x86.
Compare with Icelake Server, it includes 14 more new features. They are
amxtile, amxint8, amxbf16, avx512bf16, avx512vp2intersect, cldemote,
enqcmd, movdir64b, movdiri, ptwrite, serialize, shstk, tsxldtrk, waitpkg.
Reviewed By: craig.topper
Differential Revision: https://reviews.llvm.org/D86503
gcc errors on this, but I'm nervous that since -mtune has been
ignored by clang for so long that there may be code bases out
there that pass 32-bit cpus to clang.
Remove _COMPAT. Drop the ARCHNAME. Remove the non-COMPAT versions
that are no longer needed.
We now only use these macros in places where we need compatibility
with libgcc/compiler-rt. So we don't need to call out _COMPAT
specifically.
setFeatureEnabled is a virtual function. setFeatureEnabledImpl
was its implementation. This split was to avoid virtual calls
when we need to call setFeatureEnabled in initFeatureMap.
With C++11 we can use 'final' on setFeatureEnabled to enable
the compiler to perform de-virtualization for the initFeatureMap
calls.
Previously we had to specify the forward and backwards feature dependencies separately which was error prone. And as dependencies have gotten more complex it was hard to be sure the transitive dependencies were handled correctly. The way it was written was also not super readable.
This patch replaces everything with a table that lists what features a feature is dependent on directly. Then we can recursively walk through the table to find the transitive dependencies. This is largely based on how we handle subtarget features in the MC layer from the tablegen descriptions.
Differential Revision: https://reviews.llvm.org/D83273
Instead of detecting the string in 2 places. Just swap the string
to 'sse4.1' or 'sse4.2' at the top of the function.
Prep work for a patch to switch the rest of this function to a
table based system. And I don't want to include 'sse4a' in the
table.
This replaces the switch statement implementation in the clang's
X86.cpp with a lookup table in X86TargetParser.cpp.
I've used constexpr and copy of the FeatureBitset from
SubtargetFeature.h to store the features in a lookup table.
After the lookup the bitset is translated into strings for use
by the rest of the frontend code.
I had to modify the implementation of the FeatureBitset to avoid
bugs in gcc 5.5 constexpr handling. It seems to not like the
same array entry to be used on the left side and right hand side
of an assignment or &= or |=. I've also used uint32_t instead of
uint64_t and sized based on the X86::CPU_FEATURE_MAX.
I've initialized the features for different CPUs outside of the
table so that we can express inheritance in an adhoc way. This
was one of the big limitations of the switch and we had resorted
to labels and gotos.
Differential Revision: https://reviews.llvm.org/D82731
Previously we inferred it if sse4.2 ended up being enabled after
all feature processing. But writing -march=nehalem -mno-sse4.2
should have popcnt enabled.
CPUs with avx always have xsave, but some CPUs without avx also
have xsave. So we shouldn't disable xsave just because avx is
disabled. This would prevent xsave from being enabled with
-march=native on CPUs with xsave and not avx.
But we also don't want -mavx -mno-avx to leave xsave eanabled.
So only enable xsave if avx is enabled after processing all features.
I thought about just not turning xsave on with avx at all, but
there might be someone out there depending on it.
These features implicitly enabled XSAVE in the frontend, but not
the backend. Disabling XSAVE in the frontend disabled XSAVEOPT, but
not the other 2. Nothing happened in the backend.
Zahira Ammarguellat