The inline code in the description of `DW_OP_LLVM_arg` wasn't terminating
correctly, leading to more text displayed as code than intended. This fixes that
up and adds a superscript as a tiny embellishment.
Mostly just modeled after vp.fneg except there is a
"functional instruction" for fneg while fabs is always an
intrinsic.
Reviewed By: fakepaper56
Differential Revision: https://reviews.llvm.org/D132793
The KCFI sanitizer, enabled with `-fsanitize=kcfi`, implements a
forward-edge control flow integrity scheme for indirect calls. It
uses a !kcfi_type metadata node to attach a type identifier for each
function and injects verification code before indirect calls.
Unlike the current CFI schemes implemented in LLVM, KCFI does not
require LTO, does not alter function references to point to a jump
table, and never breaks function address equality. KCFI is intended
to be used in low-level code, such as operating system kernels,
where the existing schemes can cause undue complications because
of the aforementioned properties. However, unlike the existing
schemes, KCFI is limited to validating only function pointers and is
not compatible with executable-only memory.
KCFI does not provide runtime support, but always traps when a
type mismatch is encountered. Users of the scheme are expected
to handle the trap. With `-fsanitize=kcfi`, Clang emits a `kcfi`
operand bundle to indirect calls, and LLVM lowers this to a
known architecture-specific sequence of instructions for each
callsite to make runtime patching easier for users who require this
functionality.
A KCFI type identifier is a 32-bit constant produced by taking the
lower half of xxHash64 from a C++ mangled typename. If a program
contains indirect calls to assembly functions, they must be
manually annotated with the expected type identifiers to prevent
errors. To make this easier, Clang generates a weak SHN_ABS
`__kcfi_typeid_<function>` symbol for each address-taken function
declaration, which can be used to annotate functions in assembly
as long as at least one C translation unit linked into the program
takes the function address. For example on AArch64, we might have
the following code:
```
.c:
int f(void);
int (*p)(void) = f;
p();
.s:
.4byte __kcfi_typeid_f
.global f
f:
...
```
Note that X86 uses a different preamble format for compatibility
with Linux kernel tooling. See the comments in
`X86AsmPrinter::emitKCFITypeId` for details.
As users of KCFI may need to locate trap locations for binary
validation and error handling, LLVM can additionally emit the
locations of traps to a `.kcfi_traps` section.
Similarly to other sanitizers, KCFI checking can be disabled for a
function with a `no_sanitize("kcfi")` function attribute.
Relands 67504c9549 with a fix for
32-bit builds.
Reviewed By: nickdesaulniers, kees, joaomoreira, MaskRay
Differential Revision: https://reviews.llvm.org/D119296
The KCFI sanitizer, enabled with `-fsanitize=kcfi`, implements a
forward-edge control flow integrity scheme for indirect calls. It
uses a !kcfi_type metadata node to attach a type identifier for each
function and injects verification code before indirect calls.
Unlike the current CFI schemes implemented in LLVM, KCFI does not
require LTO, does not alter function references to point to a jump
table, and never breaks function address equality. KCFI is intended
to be used in low-level code, such as operating system kernels,
where the existing schemes can cause undue complications because
of the aforementioned properties. However, unlike the existing
schemes, KCFI is limited to validating only function pointers and is
not compatible with executable-only memory.
KCFI does not provide runtime support, but always traps when a
type mismatch is encountered. Users of the scheme are expected
to handle the trap. With `-fsanitize=kcfi`, Clang emits a `kcfi`
operand bundle to indirect calls, and LLVM lowers this to a
known architecture-specific sequence of instructions for each
callsite to make runtime patching easier for users who require this
functionality.
A KCFI type identifier is a 32-bit constant produced by taking the
lower half of xxHash64 from a C++ mangled typename. If a program
contains indirect calls to assembly functions, they must be
manually annotated with the expected type identifiers to prevent
errors. To make this easier, Clang generates a weak SHN_ABS
`__kcfi_typeid_<function>` symbol for each address-taken function
declaration, which can be used to annotate functions in assembly
as long as at least one C translation unit linked into the program
takes the function address. For example on AArch64, we might have
the following code:
```
.c:
int f(void);
int (*p)(void) = f;
p();
.s:
.4byte __kcfi_typeid_f
.global f
f:
...
```
Note that X86 uses a different preamble format for compatibility
with Linux kernel tooling. See the comments in
`X86AsmPrinter::emitKCFITypeId` for details.
As users of KCFI may need to locate trap locations for binary
validation and error handling, LLVM can additionally emit the
locations of traps to a `.kcfi_traps` section.
Similarly to other sanitizers, KCFI checking can be disabled for a
function with a `no_sanitize("kcfi")` function attribute.
Reviewed By: nickdesaulniers, kees, joaomoreira, MaskRay
Differential Revision: https://reviews.llvm.org/D119296
musttail should be honored even in the presence of attributes like "disable-tail-calls". SelectionDAG properly handles this.
Update LangRef to explicitly mention that this is the semantics of musttail.
Reviewed By: rnk
Differential Revision: https://reviews.llvm.org/D132193
As discussed in [0], this diff adds the `skipprofile` attribute to
prevent the function from being profiled while allowing profiled
functions to be inlined into it. The `noprofile` attribute remains
unchanged.
The `noprofile` attribute is used for functions where it is
dangerous to add instrumentation to while the `skipprofile` attribute is
used to reduce code size or performance overhead.
[0] https://discourse.llvm.org/t/why-does-the-noprofile-attribute-restrict-inlining/64108
Reviewed By: phosek
Differential Revision: https://reviews.llvm.org/D130807
This belongs to a series of patches which try to solve the thread
identification problem in coroutines. See
https://discourse.llvm.org/t/address-thread-identification-problems-with-coroutine/62015
for a full background.
The problem consists of two concrete problems: TLS variable and readnone
functions. This patch tries to convert the TLS problem to readnone
problem by converting the access of TLS variable to an intrinsic which
is marked as readnone.
The readnone problem would be addressed in following patches.
Reviewed By: nikic, jyknight, nhaehnle, ychen
Differential Revision: https://reviews.llvm.org/D125291
The table of contents in the HTML version of this doc takes up 25 pages
(in my browser, on my 4K monitor) and is too long for me to navigate
comfortably. And most of it is irrelevant detail like this:
- Bitwise Binary Operations
- 'shl' Instruction
- Syntax:
- Overview:
- Arguments:
- Semantics:
- Example:
- 'lshr' Instruction
- Syntax:
- Overview:
- Arguments:
- Semantics:
- Example:
Reducing the contents depth from 4 to 3 removes most of this detail,
leaving just a list of instructions, which only takes up 7 pages and I
find it much easier to navigate.
Incidentally the depth was set to 3 when this document was first
converted to reST and was only increased to 4 in what looks like an
accidental change: 080133453b
Differential Revision: https://reviews.llvm.org/D130635
Otherwise we have to work pretty hard to ensure a discarded alloc/free
pair doesn't remove a return value that's still useful.
Differential Revision: https://reviews.llvm.org/D130568
Update LangRef examples to use opaque pointers in most places.
I've retained typed pointers in a few cases where opaque pointers
don't make much sense, e.g. pointer to pointer bitcasts.
Differential Revision: https://reviews.llvm.org/D130356
Opaque pointers support is complete and default. Specify ptr as
the normal pointer type and i8* as something supported under
non-default options.
A larger update of examples in LangRef is still needed.
To solve the readnone problems in coroutines. See
https://discourse.llvm.org/t/address-thread-identification-problems-with-coroutine/62015
for details.
According to the discussion, we decide to fix the problem by inserting
isPresplitCoroutine() checks in different passes instead of
wrapping/unwrapping readnone attributes in CoroEarly/CoroCleanup passes.
In this direction, we might not be able to cover every case at first.
Let's take a "find and fix" strategy.
Reviewed By: nikic, nhaehnle, jyknight
Differential Revision: https://reviews.llvm.org/D127383
D123493 introduced llvm::Module::Min to encode module flags metadata for AArch64
BTI/PAC-RET. llvm::Module::Min does not take effect when the flag is absent in
one module. This behavior is misleading and does not address backward
compatibility problems (when a bitcode with "branch-target-enforcement"==1 and
another without the flag are merged, the merge result is 1 instead of 0).
To address the problems, require Min flags to be non-negative and treat absence
as having a value of zero. For an old bitcode without
"branch-target-enforcement"/"sign-return-address", its value is as if 0.
Differential Revision: https://reviews.llvm.org/D129911
is out of range. Both intrinsics return a poison value.
Consequently, mark the intrinsics speculatable.
Differential Revision: https://reviews.llvm.org/D129656
Following some recent discussions, this changes the representation
of callbrs in IR. The current blockaddress arguments are replaced
with `!` label constraints that refer directly to callbr indirect
destinations:
; Before:
%res = callbr i8* asm "", "=r,r,i"(i8* %x, i8* blockaddress(@test8, %foo))
to label %asm.fallthrough [label %foo]
; After:
%res = callbr i8* asm "", "=r,r,!i"(i8* %x)
to label %asm.fallthrough [label %foo]
The benefit of this is that we can easily update the successors of
a callbr, without having to worry about also updating blockaddress
references. This should allow us to remove some limitations:
* Allow unrolling/peeling/rotation of callbr, or any other
clone-based optimizations
(https://github.com/llvm/llvm-project/issues/41834)
* Allow duplicate successors
(https://github.com/llvm/llvm-project/issues/45248)
This is just the IR representation change though, I will follow up
with patches to remove limtations in various transformation passes
that are no longer needed.
Differential Revision: https://reviews.llvm.org/D129288
sanitize_none was never actually committed, and should be removed.
no_sanitize_memtag is to be removed in D128950.
sanitize_memtag is new in D128950.
Also update the comments on other no_sanitize_* to indicate that they're
impacted by the sanitizer ignorelist and the global-disable attribute.
Reviewed By: eugenis
Differential Revision: https://reviews.llvm.org/D129410
This patchs adds a new metadata kind `exclude` which implies that the
global variable should be given the necessary flags during code
generation to not be included in the final executable. This is done
using the ``SHF_EXCLUDE`` flag on ELF for example. This should make it
easier to specify this flag on a variable without needing to explicitly
check the section name in the target backend.
Depends on D129053 D129052
Reviewed By: jdoerfert
Differential Revision: https://reviews.llvm.org/D129151
Currently we use the `embedBufferInModule` function to store binary
strings containing device offloading data inside the host object to
create a fatbinary. In the case of LTO, we need to extract this object
from the LLVM-IR. This patch adds a metadata node for the embedded
objects containing the embedded pointers and the sections they were
stored at. This should create a cleaner interface for identifying these
values.
In the future it may be worthwhile to also encode an `ID` in the
metadata corresponding to the object's special section type if relevant.
This would allow us to extract the data from an object file and LLVM-IR
using the same ID.
Reviewed By: jdoerfert
Differential Revision: https://reviews.llvm.org/D129033
This patch adds the support for `fmax` and `fmin` operations in `atomicrmw`
instruction. For now (at least in this patch), the instruction will be expanded
to CAS loop. There are already a couple of targets supporting the feature. I'll
create another patch(es) to enable them accordingly.
Reviewed By: arsenm
Differential Revision: https://reviews.llvm.org/D127041
Information in the function `Prologue Data` is intentionally opaque.
When a function with `Prologue Data` is duplicated. The self (global
value) references inside `Prologue Data` is still pointing to the
original function. This may cause errors like `fatal error: error in backend: Cannot represent a difference across sections`.
This patch detaches the information from function `Prologue Data`
and attaches it to a function metadata node.
This and D116130 fix https://github.com/llvm/llvm-project/issues/49689.
Reviewed By: pcc
Differential Revision: https://reviews.llvm.org/D115844
These intrinsics are now fundemental for SVE code generation and have been
present for a year and a half, hence move them out of the experimental
namespace.
Differential Revision: https://reviews.llvm.org/D127976
In the same spirit as D73543 and in reply to https://reviews.llvm.org/D126768#3549920 this patch is adding support for `__builtin_memset_inline`.
The idea is to get support from the compiler to easily write efficient memory function implementations.
This patch could be split in two:
- one for the LLVM part adding the `llvm.memset.inline.*` intrinsics.
- and another one for the Clang part providing the instrinsic as a builtin.
Differential Revision: https://reviews.llvm.org/D126903
I chose to encode the allockind information in a string constant because
otherwise we would get a bit of an explosion of keywords to deal with
the possible permutations of allocation function types.
I'm not sure that CodeGen.h is the correct place for this enum, but it
seemed to kind of match the UWTableKind enum so I put it in the same
place. Constructive suggestions on a better location most certainly
encouraged.
Differential Revision: https://reviews.llvm.org/D123088
This patch fixes formatting inside Functions section of declare
by making it consistent with the way how define is written.
Fixes#39844
Reviewed By: RKSimon
Differential Revision: https://reviews.llvm.org/D125581
This change is a small refactor of Functions section
to update placement of define syntax.
Reviewed By: RKSimon
Differential revision: https://reviews.llvm.org/D125831
This adds support for pointer types for `atomic xchg` and let us write
instructions such as `atomicrmw xchg i64** %0, i64* %1 seq_cst`. This
is similar to the patch for allowing atomicrmw xchg on floating point
types: https://reviews.llvm.org/D52416.
Differential Revision: https://reviews.llvm.org/D124728
X86 codegen uses function attribute `min-legal-vector-width` to select the proper ABI. The intention of the attribute is to reflect user's requirement when they passing or returning vector arguments. So Clang front-end will iterate the vector arguments and set `min-legal-vector-width` to the width of the maximum for both caller and callee.
It is assumed any middle end optimizations won't care of the attribute expect inlining and argument promotion.
- For inlining, we will propagate the attribute of inlined functions because the inlining functions become the newer caller.
- For argument promotion, we check the `min-legal-vector-width` of the caller and callee and refuse to promote when they don't match.
The problem comes from the optimizations' combination, as shown by https://godbolt.org/z/zo3hba8xW. The caller `foo` has two callees `bar` and `baz`. When doing argument promotion, both `foo` and `bar` has the same `min-legal-vector-width`. So the argument was promoted to vector. Then the inlining inlines `baz` to `foo` and updates `min-legal-vector-width`, which results in ABI mismatch between `foo` and `bar`.
This patch fixes the problem by expanding the concept of `min-legal-vector-width` to indicator of functions arguments. That says, any passes touch functions arguments have to set `min-legal-vector-width` to the value reflects the width of vector arguments. It makes sense to me because any arguments modifications are ABI related and should response for the ABI compatibility.
Differential Revision: https://reviews.llvm.org/D123284
For the AIX linker, under default options, global or weak symbols which
have no visibility bits set to zero (i.e. no visibility, similar to ELF
default) are only exported if specified on an export list provided to
the linker. So AIX has an additional visibility style called
"exported" which indicates to the linker that the symbol should
be explicitly globally exported.
This change maps "dllexport" in the LLVM IR to correspond to XCOFF
exported as we feel this best models the intended semantic (discussion
on the discourse RFC thread: https://discourse.llvm.org/t/rfc-adding-exported-visibility-style-to-the-ir-to-model-xcoff-exported-visibility/61853)
and allows us to enable writing this visibility for the AIX target
in the assembly path.
Reviewed By: DiggerLin
Differential Revision: https://reviews.llvm.org/D123951
This continues the push away from hard-coded knowledge about functions
towards attributes. We'll use this to annotate free(), realloc() and
cousins and obviate the hard-coded list of free functions.
Differential Revision: https://reviews.llvm.org/D123083
This change introduces a new intrinsic, `llvm.is.fpclass`, which checks
if the provided floating-point number belongs to any of the the specified
value classes. The intrinsic implements the checks made by C standard
library functions `isnan`, `isinf`, `isfinite`, `isnormal`, `issubnormal`,
`issignaling` and corresponding IEEE-754 operations.
The primary motivation for this intrinsic is the support of strict FP
mode. In this mode using compare instructions or other FP operations is
not possible, because if the value is a signaling NaN, floating-point
exception `Invalid` is raised, but the aforementioned functions must
never raise exceptions.
Currently there are two solutions for this problem, both are
implemented partially. One of them is using integer operations to
implement the check. It was implemented in https://reviews.llvm.org/D95948
for `isnan`. It solves the problem of exceptions, but offers one
solution for all targets, although some can do the check in more
efficient way.
The other, implemented in https://reviews.llvm.org/D96568, introduced a
hook 'clang::TargetCodeGenInfo::testFPKind', which injects a target
specific code into IR to implement `isnan` and some other functions. It is
convenient for targets that have dedicated instruction to determine FP data
class. However using target-specific intrinsic complicates analysis and can
prevent some optimizations.
A special intrinsic for value class checks allows representing data class
tests with enough flexibility. During IR transformations it represents the
check in target-independent way and saves it from undesired transformations.
In the instruction selector it allows efficient lowering depending on the
used target and mode.
This implementation is an extended variant of `llvm.isnan` introduced
in https://reviews.llvm.org/D104854. It is limited to minimal intrinsic
support. Target-specific treatment will be implemented in separate
patches.
Differential Revision: https://reviews.llvm.org/D112025
This patch unifies the wording used for readnone, readonly and writeonly
attributes. The definitions now more specifically refer to memory visible
outside the function
The motivation for the clarification is D123473.
Reviewed By: nlopes
Differential Revision: https://reviews.llvm.org/D124124
J. Ryan Stinnett