The previous implementation of time tracing in NewPassManager is direct but messive.
The key codes are like the demo below:
```
/// Runs the function pass across every function in the module.
PreservedAnalyses run(LazyCallGraph::SCC &C, CGSCCAnalysisManager &AM,
LazyCallGraph &CG, CGSCCUpdateResult &UR) {
/// ...
PreservedAnalyses PassPA;
{
TimeTraceScope TimeScope(Pass.name());
PassPA = Pass.run(F, FAM);
}
/// ...
}
```
It can be bothered to judge where should we add the tracing codes by hands.
With the PassInstrumentation framework, we can easily add `Before/After` callback
functions to add time tracing codes.
Differential Revision: https://reviews.llvm.org/D131960
Summary:
The code for generating a name for loops for various reporting scenarios
created a name by serializing the loop into a string. This may result in
a very large name for a loop containing many blocks. Use the getName()
function on the loop instead.
Author: Jamie Schmeiser <schmeise@ca.ibm.com>
Reviewed By: Whitney (Whitney Tsang), aeubanks (Arthur Eubanks)
Differential Revision: https://reviews.llvm.org/D133587
NewPM -filter-passes (D86360) uses ClassName instead of pass-name as used in
`-passes`, `-print-after`, etc. D87216 has added a mechanism to map
ClassName to pass-name. Adopt it for -filter-passes.
Reviewed By: aeubanks
Differential Revision: https://reviews.llvm.org/D133263
Introduces the SanitizerBinaryMetadata instrumentation pass which uses
the new MD_pcsections metadata kinds to instrument certain types of
instructions and functions required for breakpoint-based sanitizers.
The first intended user of the binary metadata emitted will be a variant
of GWP-TSan [1]. GWP-TSan will require information about atomic
accesses; to unambiguously determine if an access is atomic or not, we
also require "covered" information which code has been compiled with
SanitizerBinaryMetadata instrumentation enabled.
[1] https://llvm.org/devmtg/2020-09/slides/Morehouse-GWP-Tsan.pdf
Reviewed By: dvyukov
Differential Revision: https://reviews.llvm.org/D130887
Similar to OptimizerLastEPCallbacks workaround
added D96320.
Probably NFC as-is, I don't see anything hooked with this callbacks yet,
but I we are looking to move sanitizers.
Reviewed By: aeubanks, MaskRay
Differential Revision: https://reviews.llvm.org/D133333
The current code is basically just emulating what the analysis manager does.
Reviewed By: asbirlea
Differential Revision: https://reviews.llvm.org/D132581
[MachineFunctionPass] Support -filter-passes for -print-changed
-filter-passes specifies a `PassID` (a lower-case dashed-separated pass name,
also used by -print-after, -stop-after, etc) instead of a CamelCasePass.
`-filter-passes=CamelCaseNewPMPass` seems like a workaround for new PM passes before
we can use lower-case dashed-separated pass names (as used by `-passes=`).
Example:
```
# getPassName() is "IRTranslator". PassID is "irtranslator"
llc -mtriple=aarch64 -print-changed -filter-passes=irtranslator < print-changed-machine.ll
```
Close https://github.com/llvm/llvm-project/issues/57453
Reviewed By: aeubanks
Differential Revision: https://reviews.llvm.org/D133055
The ArgumentPromotion pass uses Mem2Reg promotion at the end to cutting
down generated `alloca` instructions as well as meaningless `store`s and
this behavior can leave unused (dead) arguments. To eliminate the dead
arguments and therefore let the DeadCodeElimination remove becoming dead
inserted `GEP`s as well as `load`s and `cast`s in the callers, the
DeadArgumentElimination pass should be run after the ArgumentPromotion
one.
Differential Revision: https://reviews.llvm.org/D128830
The commit breaks the compiler when a function is used as a function
parameter (hm... for a function from the standard C library?):
```
static float strtof(char *, char *) {}
void a() { strtof(a, 0); }
```
This reverts commit 879f5118fc.
This updates the naming for the LAA printing pass to be in line with
most other analysis printing passes.
The old name has come up as confusing multiple times already, e.g. in
D131924.
The ArgumentPromotion pass uses Mem2Reg promotion at the end to cutting
down generated `alloca` instructions as well as meaningless `store`s and
this behavior can leave unused (dead) arguments. To eliminate the dead
arguments and therefore let the DeadCodeElimination remove becoming dead
inserted `GEP`s as well as `load`s and `cast`s in the callers, the
DeadArgumentElimination pass should be run after the ArgumentPromotion
one.
Differential Revision: https://reviews.llvm.org/D128830
The ArgumentPromotion pass uses Mem2Reg promotion at the end to cutting
down generated `alloca` instructions as well as meaningless `store`s and
this behavior can leave unused (dead) arguments. To eliminate the dead
arguments and therefore let the DeadCodeElimination remove becoming dead
inserted `GEP`s as well as `load`s and `cast`s in the callers, the
DeadArgumentElimination pass should be run after the ArgumentPromotion
one.
Differential Revision: https://reviews.llvm.org/D128830
Add the `-enable-post-pgo-loop-rotation` option to enable or disable the loop rotation transformation [1]. With some instrumentations, e.g., function entry coverage [2], loop rotation is not necessary and can lead to some surprise differences in codegen, even for functions where instrumentation is blocked with `noprofile` or `skipprofile`. The default value is `true` so the default behavior does not change.
[1] https://www.llvm.org/docs/LoopTerminology.html#loop-terminology-loop-rotate
[2] https://reviews.llvm.org/D116180
Reviewed By: phosek
Differential Revision: https://reviews.llvm.org/D131817
With profile data, non-trivial LoopUnswitch will only apply on non-cold loops, as unswitching cold loops may not gain much benefit but significantly increase the code size.
Reviewed By: aeubanks, asbirlea
Differential Revision: https://reviews.llvm.org/D129599
Previously we'd go off the end of the BI iterator because we expected
that the relative positions of common blocks before and after were
consistent. That's not always true though, for example with
jump-threading.
Reviewed By: jamieschmeiser
Differential Revision: https://reviews.llvm.org/D130596
This patch is the first of the two-patch series (D130188, D130179) that
resolve PR56275 (https://github.com/llvm/llvm-project/issues/56275)
which is a missed opportunity, where a perfrectly valid case for loop
interchange failed interchange legality.
If the distance/direction vector produced by dependence analysis (DA) is
negative, it needs to be normalized (reversed). This patch provides helper
functions `isDirectionNegative()` and `normalize()` in DA that does the
normalization, and clients can query DA to do normalization if needed.
A pass option `<normalized-results>` is added to DependenceAnalysisPrinterPass,
and we leverage it to update DA test cases to make sure of test coverage. The
test cases added in `Banerjee.ll` shows that negative vectors are normalized
with `print<da><normalized-results>`.
Reviewed By: bmahjour, Meinersbur, #loopoptwg
Differential Revision: https://reviews.llvm.org/D130188
Fixes code in OrderedChangedData<T>::report which assumes that a string will only appear once in Before/After.
Reviewed By: jamieschmeiser
Differential Revision: https://reviews.llvm.org/D130587
Follow-up to D130434.
Move doSystemDiff to PrintPasses.cpp and call it in MachineFunctionPass.cpp.
Reviewed By: aeubanks
Differential Revision: https://reviews.llvm.org/D130833
-print-changed for new pass manager is handy beside -print-after-all.
Port it to MachineFunctionPass.
Note: lib/Passes/StandardInstrumentations.cpp implements a number of
misc features. If we want to use them for codegen, we may need to lift
some functionality to LLVMIR.
Reviewed By: aeubanks, jamieschmeiser
Differential Revision: https://reviews.llvm.org/D130434
We call tail-call-elim near the beginning of the pipeline,
but that is too early to annotate calls that get added later.
In the motivating case from issue #47852, the missing 'tail'
on memset leads to sub-optimal codegen.
I experimented with removing the early instance of
tail-call-elim instead of just adding another pass, but that
appears to be slightly worse for compile-time:
+0.15% vs. +0.08% time.
"tailcall" shows adding the pass; "tailcall2" shows moving
the pass to later, then adding the original early pass back
(so 1596886802 is functionally equivalent to 180b0439dc ):
https://llvm-compile-time-tracker.com/index.php?config=NewPM-O3&stat=instructions&remote=rotateright
Note that there was an effort to split the tail call functionality
into 2 passes - that could help reduce compile-time if we find
that this change costs more in compile-time than expected based
on the preliminary testing:
D60031
Differential Revision: https://reviews.llvm.org/D130374
This is helpful for debugging issues with very large functions or SCC.
Also helpful when function names are very large and it's hard to tell the number of nodes in an SCC.
Reviewed By: hans
Differential Revision: https://reviews.llvm.org/D128003
This patch turns on the flag `-enable-no-rerun-simplification-pipeline`, which means the simplification pipeline will not be rerun on unchanged functions in the CGSCCPass Manager.
Compile time improvement:
https://llvm-compile-time-tracker.com/compare.php?from=17457be1c393ff691cca032b04ea1698fedf0301&to=882301ebb893c8ef9f09fe1ea871f7995426fa07&stat=instructions
No meaningful run time regressions observed in the llvm test suite and
in additional internal workloads at this time.
The example test in `test/Other/no-rerun-function-simplification-pipeline.ll` is a good means to understand the effect of this change:
```
define void @f1(void()* %p) alwaysinline {
call void %p()
ret void
}
define void @f2() #0 {
call void @f1(void()* @f2)
call void @f3()
ret void
}
define void @f3() #0 {
call void @f2()
ret void
}
```
There are two SCCs formed by the ModuleToPostOrderCGSCCAdaptor: (f1) and (f2, f3).
The pass manager runs on the first SCC, leading to running the simplification pipeline (function and loop passes) on f1. With the flag on, after this, the output will have `Running analysis: ShouldNotRunFunctionPassesAnalysis on f1`.
Next, the pass manager runs on the second SCC: (f2, f3). Since f1() was inlined, f2() now calls itself, and also calls f3(), while f3() only calls f2().
So the pass manager for the SCC first runs the Inliner on (f2, f3), then the simplification pipeline on f2.
With the flag on, the output will have `Running analysis: ShouldNotRunFunctionPassesAnalysis on f2`; unless the inliner makes a change, this analysis remains preserved which means there's no reason to rerun the simplification pipeline. With the flag off, there is a second run of the simplification pipeline run on f2.
Next, the same flow occurs for f3. The simplification pipeline is run on f3 a single time with the flag on, along with `ShouldNotRunFunctionPassesAnalysis on f3`, and twice with the flag off.
The reruns occur only on f2 and f3 due to the additional ref edges.
(Reapply after revert in e9ce1a5880 due to
Fuchsia test failures. Removed changes in lib/ExecutionEngine/ other
than error categories, to be checked in more detail and reapplied
separately.)
Bulk remove many of the more trivial uses of ManagedStatic in the llvm
directory, either by defining a new getter function or, in many cases,
moving the static variable directly into the only function that uses it.
Differential Revision: https://reviews.llvm.org/D129120
Bulk remove many of the more trivial uses of ManagedStatic in the llvm
directory, either by defining a new getter function or, in many cases,
moving the static variable directly into the only function that uses it.
Differential Revision: https://reviews.llvm.org/D129120
The CGProfilePass needs to be run during FullLTO compilation at link
time to emit the .llvm.call-graph-profile section to the compiled LTO
object file. Currently, it is being run only during the initial
LTO-prelink compilation stage (to produce the bitcode files to be
consumed by the linker) and so the section is not produced.
ThinLTO is not affected because:
- For ThinLTO-prelink compilation the CGProfilePass pass is not run
because ThinLTO-prelink passes are added via
buildThinLTOPreLinkDefaultPipeline. Normal and FullLTO-prelink
passes are both added via buildPerModuleDefaultPipeline which uses
the LTOPreLink parameter to customize its behavior for the
FullLTO-prelink pass differences.
- ThinLTO backend compilation phase adds the CGProfilePass (see:
buildModuleOptimizationPipeline).
Adjust when the pass is run so that the .llvm.call-graph-profile
section is produced correctly for FullLTO.
Fixes#56185 (https://github.com/llvm/llvm-project/issues/56185)
Enabling the verifiers is not very helpful if their output is
suppressed beyond the fatal error.
Differential Revision: https://reviews.llvm.org/D128743
Now that we have the sanitizer metadata that is actually on the global
variable, and now that we use debuginfo in order to do symbolization of
globals, we can delete the 'llvm.asan.globals' IR synthesis.
This patch deletes the 'location' part of the __asan_global that's
embedded in the binary as well, because it's unnecessary. This saves
about ~1.7% of the optimised non-debug with-asserts clang binary.
Reviewed By: vitalybuka
Differential Revision: https://reviews.llvm.org/D127911
Symmetric transfer is not a part of C++ standards. So the vendors is not
forced to implement it any way. Given the symmetric transfer nowadays is
an optimization. It makes more sense to enable it only if the
optimization is enabled. It is also helpful for the compilation speed in
O0.
Previously if the inliner split an SCC such that an empty one remained, the MLInlineAdvisor could potentially lose track of the EdgeCount if a subsequent CGSCC pass modified the calls of a function that was initially in the SCC pre-split. Saving the seen nodes in onPassEntry resolves this.
Reviewed By: mtrofin
Differential Revision: https://reviews.llvm.org/D127693
Some cl::ZeroOrMore were added to avoid the `may only occur zero or one times!`
error. More were added due to cargo cult. Since the error has been removed,
cl::ZeroOrMore is unneeded.
Also remove cl::init(false) while touching the lines.
All callers pass true.
select-unfold-freeze.ll is now a subset of select.ll so delete it.
Reviewed By: nikic
Differential Revision: https://reviews.llvm.org/D126501
A new hidden option -print-on-crash that prints the IR as it was upon entering
the last pass when there is a crash.
The IR is saved in its print form before each pass is started and a
signal handler is registered. If the compilation crashes, the signal
handler will print the saved IR to dbgs(). This option
can be modified using -print-module-scope to get the IR for the complete
module. Note that this option only works with the new pass manager.
Reviewed By: yrouban
Differential Revision: https://reviews.llvm.org/D86657
In D123677, @YangKeao provided an implementation of `DOTGraphTraits{Viewer,Printer}` in the new pass manager. This commit migrates the `DomPrinter` and `DomViewer` to the new pass manager.
Reviewed By: Meinersbur
Differential Revision: https://reviews.llvm.org/D124904
The EnableReuseStorageInFrame option is designed for testing only.
But it is better to use *_PASS_WITH_PARAMS macro to keep consistent with
other passes.
Junduo Dong