Instead of dumping the string literal (which
quotes it and escape every non-ascii symbol),
we can use the content of the string when it is a
8 byte string.
Wide, UTF-8/UTF-16/32 strings are still completely
escaped, until we clarify how these entities should
behave (cf https://wg21.link/p2361).
`FormatDiagnostic` is modified to escape
non printable characters and invalid UTF-8.
This ensures that unicode characters, spaces and new
lines are properly rendered in static messages.
This make clang more consistent with other implementation
and fixes this tweet
https://twitter.com/jfbastien/status/1298307325443231744 :)
Of note, `PaddingChecker` did print out new lines that were
later removed by the diagnostic printing code.
To be consistent with its tests, the new lines are removed
from the diagnostic.
Unicode tables updated to both use the Unicode definitions
and the Unicode 14.0 data.
U+00AD SOFT HYPHEN is still considered a print character
to match existing practices in terminals, in addition of
being considered a formatting character as per Unicode.
Reviewed By: aaron.ballman, #clang-language-wg
Differential Revision: https://reviews.llvm.org/D108469
Instead of dumping the string literal (which
quotes it and escape every non-ascii symbol),
we can use the content of the string when it is a
8 byte string.
Wide, UTF-8/UTF-16/32 strings are still completely
escaped, until we clarify how these entities should
behave (cf https://wg21.link/p2361).
`FormatDiagnostic` is modified to escape
non printable characters and invalid UTF-8.
This ensures that unicode characters, spaces and new
lines are properly rendered in static messages.
This make clang more consistent with other implementation
and fixes this tweet
https://twitter.com/jfbastien/status/1298307325443231744 :)
Of note, `PaddingChecker` did print out new lines that were
later removed by the diagnostic printing code.
To be consistent with its tests, the new lines are removed
from the diagnostic.
Unicode tables updated to both use the Unicode definitions
and the Unicode 14.0 data.
U+00AD SOFT HYPHEN is still considered a print character
to match existing practices in terminals, in addition of
being considered a formatting character as per Unicode.
Reviewed By: aaron.ballman, #clang-language-wg
Differential Revision: https://reviews.llvm.org/D108469
For example, when parsing Zbpbo0p911, an error will be reported:
"multi-character extensions must be separated by underscores"
Reviewed By: asb
Differential Revision: https://reviews.llvm.org/D128644
Implements [[ https://wg21.link/p2071r1 | P2071 Named Universal Character Escapes ]] - as an extension in all language mode, the patch not warn in c++23 mode will be done later once this paper is plenary approved (in July).
We add
* A code generator that transforms `UnicodeData.txt` and `NameAliases.txt` to a space efficient data structure that can be queried in `O(NameLength)`
* A set of functions in `Unicode.h` to query that data, including
* A function to find an exact match of a given Unicode character name
* A function to perform a loose (ignoring case, space, underscore, medial hyphen) matching
* A function returning the best matching codepoint for a given string per edit distance
* Support of `\N{}` escape sequences in String and character Literals, with loose and typos diagnostics/fixits
* Support of `\N{}` as UCN with loose matching diagnostics/fixits.
Loose matching is considered an error to match closely the semantics of P2071.
The generated data contributes to 280kB of data to the binaries.
`UnicodeData.txt` and `NameAliases.txt` are not committed to the repository in this patch, and regenerating the data is a manual process.
Reviewed By: tahonermann
Differential Revision: https://reviews.llvm.org/D123064
Binary size of `clang` is trivial; namely, numerical value doesn't
change when measured in MiB, and `.data` section increases from 139Ki to
173 Ki.
Differential Revision: https://reviews.llvm.org/D128070
This patch implements symlinks for the in-memory VFS. Original author: @erik.pilkington.
Depends on D117648 & D117649.
Reviewed By: sammccall
Differential Revision: https://reviews.llvm.org/D117650
To accomodate macOS universal configuration include the assembly files
and `blake3_neon.c` without a CMake check but instead guard their source
with architecture "#ifdef" checks.
Differential Revision: https://reviews.llvm.org/D128132
Currently the backtrace emitted on windows when llvm-symbolizer is not
available includes addresses which cannot be easily decoded because
the addresses have the containing module's run-time base address added
into them, but we don't know what those base addresses are. This
change emits a module offset rather than an address.
There are a couple of related changes which were included as a result
of the review discussion for this patch:
- I have also removed the parameter printing as it adds noise to the
dump and doesn't seem useful.
- I have added the exception code to the backtrace.
Differential Review: https://reviews.llvm.org/D127915
Patch created by running:
rg -l parallelForEachN | xargs sed -i '' -c 's/parallelForEachN/parallelFor/'
No behavior change.
Differential Revision: https://reviews.llvm.org/D128140
UNIX03 conformance requires utilities to flush stdout before exiting and raise
an error if writing fails. Flushing already happens on a call to exit
and thus automatically on a return from main. Write failure is then
detected by LLVM's default SIGPIPE handler. The handler already exits with
a non-zero code, but conformance additionally requires an error message.
First reapply attempt I hadn't noticed the test had changed, hopefully this
goes better.
UNIX03 conformance requires utilities to flush stdout before exiting and raise
an error if writing fails. Flushing already happens on a call to exit
and thus automatically on a return from main. Write failure is then
detected by LLVM's default SIGPIPE handler. The handler already exits with
a non-zero code, but conformance additionally requires an error message.
This has been superseded by the llvm/Support/VCSRevision.h header. So
far as I can tell, nothing in the CMake build sets LLVM_VERSION_INFO. It
was always undefined, and the ifdefs using it were dead. However, CMake
is very flexible, so it's possible that I missed some ways to set this
variable. One could, for example, probably pass -DLLVM_VERSION_INFO=x on
the command line and get that through to configure_file, or set the
variable in an obscure way (`set(${proj}_VERSION_INFO "x")`). I'm
reasonably confident that isn't happening, but I'd like a second
opinion.
Update the Bazel and gn builds accordingly.
Differential Revision: https://reviews.llvm.org/D126977
This patch adds an llvm-driver multicall tool that can combine multiple
LLVM-based tools. The build infrastructure is enabled for a tool by
adding the GENERATE_DRIVER option to the add_llvm_executable CMake
call, and changing the tool's main function to a canonicalized
tool_name_main format (i.e. llvm_ar_main, clang_main, etc...).
As currently implemented llvm-driver contains dsymutil, llvm-ar,
llvm-cxxfilt, llvm-objcopy, and clang (if clang is included in the
build).
llvm-driver can be enabled from builds by setting
LLVM_TOOL_LLVM_DRIVER_BUILD=On.
There are several limitations in the current implementation, which can
be addressed in subsequent patches:
(1) the multicall binary cannot currently properly handle
multi-dispatch tools. This means symlinking llvm-ranlib to llvm-driver
will not properly result in llvm-ar's main being called.
(2) the multicall binary cannot be comprised of tools containing
conflicting cl::opt options as the global cl::opt option list cannot
contain duplicates.
These limitations can be addressed in subsequent patches.
Differential revision: https://reviews.llvm.org/D109977
In some instances its advantageous to calculate edit distances without worrying about casing.
Currently to achieve this both strings need to be converted to the same case first, then edit distance can be calculated.
Reviewed By: dblaikie
Differential Revision: https://reviews.llvm.org/D126159
The function promises to canonicalize the path, but neglected to do so
for the root component.
For example, calling remove_dots("/tmp/foo.c", Style::windows_backslash)
resulted in "/tmp\foo.c". Now it produces "\tmp\foo.c".
Also fix FIXME in the corresponding test.
Reviewed By: rnk
Differential Revision: https://reviews.llvm.org/D126412
Paths that start with `\\?\` are absolute paths, and aren't expected
to be used with wildcard expressions.
Previously, the `?` at the start of the path triggered the condition
for a potential wildcard, which caused the path to be split and
reassembled. In builds with `LLVM_WINDOWS_PREFER_FORWARD_SLASH=ON`,
this caused a path like e.g. `\\?\D:\tmp\hello.cpp` to be reassembled
into `\\?\D:\tmp/hello.cpp` which isn't a valid path (as such
absolute paths must use backslashes consistently).
This fixes https://github.com/mstorsjo/llvm-mingw/issues/280.
I'm not sure if there's any straightforward way to add a test
for this case, unfortunately.
Differential Revision: https://reviews.llvm.org/D126675
There are a few places where we use report_fatal_error when the input is broken.
Currently, this function always crashes LLVM with an abort signal, which
then triggers the backtrace printing code.
I think this is excessive, as wrong input shouldn't give a link to
LLVM's github issue URL and tell users to file a bug report.
We shouldn't print a stack trace either.
This patch changes report_fatal_error so it uses exit() rather than
abort() when its argument GenCrashDiag=false.
Reviewed by: nikic, MaskRay, RKSimon
Differential Revision: https://reviews.llvm.org/D126550
Currently added versions are from v1.0 to v1.5, other versions
can be added as needed.
This change also adds documentation about SPIR-V target support
in LLVM.
Differential Revision: https://reviews.llvm.org/D124776
The arch or cpu has its default fpu features and versions such as fpuv2_sf/fpuv3_sf.
And there is also -mfpu option to specify and override fpu version and features.
For example, C860 has fpuv3_sf/fpuv3_df feature as default, when
-mfpu=fpv2 is given, fpuv3_sf/fpuv3_df is replaced with fpuv2_sf/fpuv2_df.
Most clients only used these methods because they wanted to be able to
extend or truncate to the same bit width (which is a no-op). Now that
the standard zext, sext and trunc allow this, there is no reason to use
the OrSelf versions.
The OrSelf versions additionally have the strange behaviour of allowing
extending to a *smaller* width, or truncating to a *larger* width, which
are also treated as no-ops. A small amount of client code relied on this
(ConstantRange::castOp and MicrosoftCXXNameMangler::mangleNumber) and
needed rewriting.
Differential Revision: https://reviews.llvm.org/D125557
It can happen on macOS that terminal doesn't report the "colors"
capability in the terminfo database, in which case `tigetnum` returns -1.
This doesn't mean however that the terminal doesn't supports color, it
just means that the capability is absent from the terminal description.
In that case, we should still fallback to the checking the $TERM
environment variable to see if it supports ANSI escapes codes.
Differential Revision: https://reviews.llvm.org/D125914
Signed-off-by: Med Ismail Bennani <medismail.bennani@gmail.com>
Fix a couple minor details in the existing logic for calculating
saved registers and stack adjustment.
Synthesize the corresponding prologues and epilogues and print them.
(This supersedes the previous printout of one single list of stored
registers; as there's lots of minor nuance differences in how
registers are pushed/popped in various corner cases, it's better to
print the full prologue/epilogue instead of trying to condense it
into one single list.)
Print the raw values of the fields Reg, R, L (LinkRegister) and C
(Chaining) instead of only printing the derived values.
Differential Revision: https://reviews.llvm.org/D125644
https://reviews.llvm.org/D109347 added support for UINT64 json numeric
types. However, it seems that it didn't properly test uint64_t numbers
larger than the int64_t because the number parsing logic doesn't
have any special handling for these large numbers.
This diffs adds a handler for large numbers, and besides that, fixes the
parsing of signed types by checking for errno ERANGE, which is the
recommended way to check if parsing fails because of out of bounds
errors. Before this diff, strtoll was always returning a number within
the bounds of an int64_t and the bounds check it was doing was completely
superfluous.
As an interesting fact about the old implementation, when calling strtoll
with "18446744073709551615", the largest uint64_t, End was S.end(), even
though it didn't use all digits. Which means that this check can only be
used to identify if the numeric string is malformed or not.
This patch also adds additional tests for extreme cases.
Differential Revision: https://reviews.llvm.org/D125322
Checking whether two KnownBits are the same is somewhat common,
mainly in test code.
I don't think there is a lot of room for confusion with "determine
what the KnownBits for an icmp eq would be", as that has a
different result type (this is what the eq() method implements,
which returns Optional<bool>).
Differential Revision: https://reviews.llvm.org/D125692
On Apple Silicon Macs, using a Darwin thread priority of PRIO_DARWIN_BG seems to
map directly to the QoS class Background. With this priority, the thread is
confined to efficiency cores only, which makes background indexing take forever.
Introduce a new ThreadPriority "Low" that sits in the middle between Background
and Default, and maps to QoS class "Utility" on Mac. Make this new priority the
default for indexing. This makes the thread run on all cores, but still lowers
priority enough to keep the machine responsive, and not interfere with
user-initiated actions.
I didn't change the implementations for Windows and Linux; on these systems,
both ThreadPriority::Background and ThreadPriority::Low map to the same thread
priority. This could be changed as a followup (e.g. by using SCHED_BATCH for Low
on Linux).
See also https://github.com/clangd/clangd/issues/1119.
Reviewed By: sammccall, dgoldman
Differential Revision: https://reviews.llvm.org/D124715
Allow zext, sext, trunc, truncUSat and truncSSat to extend or truncate
to the same bit width, which is a no-op.
Disallowing this forced clients to use workarounds like using
zextOrTrunc (even though they never wanted truncation) or zextOrSelf
(even though they did not want its strange behaviour of allowing a
*smaller* bit width, which is also treated as a no-op).
Differential Revision: https://reviews.llvm.org/D125556
UNIX03 conformance requires utilities to flush stdout before exiting and raise
an error if writing fails. Flushing already happens on a call to exit
and thus automatically on a return from main. Write failure is then
detected by LLVM's default SIGPIPE handler. The handler already exits with
a non-zero code, but conformance additionally requires an error message.
This commit adds 'K' to supported extension list (before 'J').
It makes "Zk*" extensions correctly placed before "Zv*" extensions.
Multi-letter "Z*" extensions are first ordered with the most closely
related alphabetical extension category ("IMAF..."). This is represented
in LLVM as `AllStdExts' variable in `llvm/lib/Support/RISCVISAInfo.cpp'.
However, it did not have 'k' making "Zk*" extensions not correctly ordered.
Reviewed By: kito-cheng
Differential Revision: https://reviews.llvm.org/D124340
While I think this is a performance improvement over the original, this actually fixes a correctness issue: For an appendable underlying stream, padToAlignment would fail if the additional padding would have caused the stream to grow since it was doing its own check on bounds. By deferring to the regular writeArray method this takes the same path as everything else, which does the correct bounds check in WritableBinaryStreamRef::checkOffsetForWrite (i.e. skips the extension check if BSF_Append is set). I had started to fix the existing bounds check in BinaryStreamWriter but deferred to this because it layered better and is more efficient/consistent.
It didn't look like this method was tested at all, so I added a unit test.
Differential Revision: https://reviews.llvm.org/D124746
This is needed for parallelizing of loading modules symbols in LLDB
(D122975). Currently LLDB can parallelize indexing symbols
when loading a module, but modules are loaded sequentially. If LLDB
index cache is enabled, this means that the cache loading is not
parallelized, even though it could. However doing that creates
a threadpool-within-threadpool situation, so the number of threads
would not be properly limited.
This change adds ThreadPoolTaskGroup as a simple type that can be
used with ThreadPool calls to put tasks into groups that can be
independently waited for (even recursively from within a task)
but still run in the same thread pool.
Differential Revision: https://reviews.llvm.org/D123225
Bugzilla #47579: if you invoke clang on Windows via a pathname in
which a quoted section closes just after a backslash, e.g.
"C:\Program Files\Whatever\"clang.exe
then cmd.exe and CreateProcess will correctly find the binary, because
when they parse the program name at the start of the command line,
they don't regard the \ before the " as having any kind of escaping
effect. This is different from the behaviour of the Windows standard C
library when it parses the rest of the command line, which would
consider that \" not to close the quoted string.
But this confuses windows::GetCommandLineArguments, because the
Windows API function GetCommandLineW() will return a command line
containing that \" sequence, and cl::TokenizeWindowsCommandLine will
tokenize the whole string according to the C library's rules. So it
will misidentify where the program name stops and the arguments start.
To fix this, I've introduced a new variant function
cl::TokenizeWindowsCommandLineFull(), intended to be applied to the
string returned from GetCommandLineW(). It parses the first word of
the command line according to CreateProcess's rules, considering \ to
never be an escaping character; thereafter, it switches over to the C
library rules for the rest of the command line.
Reviewed By: hans
Differential Revision: https://reviews.llvm.org/D122914
When cl::TokenizeWindowsCommandLine received a command line with an
unterminated double-quoted string at the end, it would discard the
text within that string. That doesn't match the behavior of the
standard Windows C library, which will return the text in the unclosed
quoted string as an argv word.
Fixed, and added extra unit tests in that area.
In some cases (specifically the one in Bugzilla #47579) this could
cause TokenizeWindowsCommandLine to return a zero-length list of
arguments, leading to an array overrun at the call site in
windows::GetCommandLineArguments. Added a check there, for extra
safety: now windows::GetCommandLineArguments will return an error code
instead of failing an assertion.
(This change was written as part of https://reviews.llvm.org/D122914,
but split into a separate commit at the last minute at the code
reviewer's suggestion, because it's fixing an unrelated bug in the
same area. The rest of D122914 will follow in the next commit.)
This is the first patch of a series to upstream support for the new
subtarget.
Contributors:
Jay Foad <jay.foad@amd.com>
Konstantin Zhuravlyov <kzhuravl_dev@outlook.com>
Patch 1/N for upstreaming AMDGPU gfx11 architectures.
Reviewed By: foad, kzhuravl, #amdgpu
Differential Revision: https://reviews.llvm.org/D124536
This diff factors out the check "isCrash" from the static method "throwIfCrash".
This is a helper function that can be useful in debugging / analysis, in particular,
I'm planning to use it in the future patches for lld-fuzzer.
Test plan:
1/ ninja check-all
2/ export LLD_IN_TEST=5 ninja check-lld
Differential revision: https://reviews.llvm.org/D124414
llvm-gsymutil has an implementation of AddressRange and AddressRanges
classes. That implementation might be reused in other parts of llvm.
This patch moves AddressRange and AddressRanges classes into llvm/ADT.
Differential Revision: https://reviews.llvm.org/D124350
Functionality of restoreStatOnFile may be reused. Move it into
FileUtilities.cpp. Create helper class FilePermissionsApplier
to store and apply permissions.
Differential Revision: https://reviews.llvm.org/D123821
The recently announced IBM z16 processor implements the architecture
already supported as "arch14" in LLVM. This patch adds support for
"z16" as an alternate architecture name for arch14.
The patch adds SPIRV-specific MC layer implementation, SPIRV object
file support and SPIRVInstPrinter.
Differential Revision: https://reviews.llvm.org/D116462
Authors: Aleksandr Bezzubikov, Lewis Crawford, Ilia Diachkov,
Michal Paszkowski, Andrey Tretyakov, Konrad Trifunovic
Co-authored-by: Aleksandr Bezzubikov <zuban32s@gmail.com>
Co-authored-by: Ilia Diachkov <iliya.diyachkov@intel.com>
Co-authored-by: Michal Paszkowski <michal.paszkowski@outlook.com>
Co-authored-by: Andrey Tretyakov <andrey1.tretyakov@intel.com>
Co-authored-by: Konrad Trifunovic <konrad.trifunovic@intel.com>
If capturing groups are used, the regex matcher handles something
like `(.*)suffix` by first doing a maximal match of `.*`, trying to
match `suffix` afterward, and then reducing the maximal stop
position one by one until this finally succeeds. This makes the
match quadratic in the length of the line (with large constant factors).
This is particularly problematic because regexes of this form are
ubiquitous in FileCheck (something like `[[VAR:%.*]] = ...` falls
in this category), making FileCheck executions much slower than
they have any right to be.
This implements a very crude optimization that checks if suffix
starts with a fixed character, and steps back to the last occurrence
of that character, instead of stepping back by one character at a
time. This drops FileCheck time on
clang/test/CodeGen/RISCV/rvv-intrinsics/vloxseg_mask.c from
7.3 seconds to 2.7 seconds.
An obvious further improvement would be to check more than one
character (once again, this is particularly relevant for FileCheck,
because the next character is usually a space, which happens to
have many occurrences).
This should help with https://github.com/llvm/llvm-project/issues/54821.
If the `ExternalFS` has already remapped to an external path then
`RedirectingFileSystem` should not change it to the originally provided
path. This fixes the original path always being used if multiple VFS
overlays were provided and the path wasn't found in the highest (ie.
first in the chain).
For now this is accomplished through the use of a new
`ExposesExternalVFSPath` field on `vfs::Status`. This flag is true when
the `Status` has an external path that's different from its virtual
path, ie. the contained path is the external path. See the plan in
`FileManager::getFileRef` for where this is going - eventually we won't
need `IsVFSMapped` any more and all returned paths should be virtual.
Resolves rdar://90578880 and llvm-project#53306.
Reviewed By: dexonsmith
Differential Revision: https://reviews.llvm.org/D123398
lib/Support/ThreadLocal.cpp has been uncompilable since rL158346 (2012-06) when
`data` became a char array. The error looks like
```
...llvm/lib/Support/Unix/ThreadLocal.inc:66:57: error: array type 'char[8]' is not assignable
void ThreadLocalImpl::setInstance(const void* d) { data = const_cast<void*>(d);}
```
This takes the AARCH64_ARCH_EXT_NAME in AArch64TargetParser.def and uses
it to generate all the "if bit is set add this feature name" code.
Which gives us a bunch that we were missing. I've updated testing
to include those and reordered them to match the order in the .def.
The final part of the test will catch any missing extensions if
we somehow manage to not generate an if block for them.
This has changed the order of cc1's "-target-feature" output so I've
updated some tests in clang to reflect that.
Reviewed By: tmatheson
Differential Revision: https://reviews.llvm.org/D123296
Reland Note: We've resolve the circular dependency issue on llvm/lib/Support and
llvm/TableGen.
Differential Revision: https://reviews.llvm.org/D121984
Returning `std::array<uint8_t, N>` is better ergonomics for the hashing functions usage, instead of a `StringRef`:
* When returning `StringRef`, client code is "jumping through hoops" to do string manipulations instead of dealing with fixed array of bytes directly, which is more natural
* Returning `std::array<uint8_t, N>` avoids the need for the hasher classes to keep a field just for the purpose of wrapping it and returning it as a `StringRef`
As part of this patch also:
* Introduce `TruncatedBLAKE3` which is useful for using BLAKE3 as the hasher type for `HashBuilder` with non-default hash sizes.
* Make `MD5Result` inherit from `std::array<uint8_t, 16>` which improves & simplifies its API.
Differential Revision: https://reviews.llvm.org/D123100
Add CSKY target toolchains to support csky in linux and elf environment.
It can leverage the basic universal Linux toolchain for linux environment, and only add some compile or link parameters.
For elf environment, add a CSKYToolChain to support compile and link.
Also add some parameters into basic codebase of clang driver.
Differential Revision: https://reviews.llvm.org/D121445
This reverts commit 3fda0edc51, which
breaks crash reproducers in very specific circumstances. Specifically,
since crash reproducers have `UseExternalNames` set to false, the
`File->getFileEntry().getDir()->getName()` call in `DoFrameworkLookup`
would use the *cached* directory name instead of the directory of the
looked-up file.
The plan is to re-commit this patch but to *add*
`ExposesExternalVFSPath` rather than replace `IsVFSMapped`.
Differential Revision: https://reviews.llvm.org/D123103
Currently, the LLVM/LLDB timers are visible in Instruments for all apps.
The developer-visible "PointsOfInterest" category is reserved for
runtime issues and developer-authored "important" logging. These logs
are visible to developer almost always in Instruments
The LLVM/LLDB timers do not belong there. Having these present in the
system is noisy and confusing to developers. This patch moves them under
a new "toolchain" category.
rdar://91266582
Differential revision: https://reviews.llvm.org/D123149
This reverts commit 0fe01a9346658c0955b68b123f2b470b018114b1.
The commit caused build failures like:
llvm/lib/Support/Debug.cpp:65:3: error: ‘setCurrentDebugTypes’ was
not declared in this scope; did you mean ‘setCurrentDebugType’?
With CMake, one can build for multiple macOS architectures
at the same time by setting CMAKE_OSX_ARCHITECTURES to multiple
architectures (avoiding needing to do two separate builds and
gluing the binaries together after the build).
In this case, while targeting x86_64 and arm64, neither IS_X64
nor IS_ARM64 is set, while compilation of the individual source
files will hit those cases (in either architecture mode).
Therefore, if we on the CMake level decide not to include the
architecture specific SIMD implementation files, also tell the
source this explicitly by passing the defines indicating that we
don't expect to use them.
Such a build clearly is less ideal than explicitly targeting one
architecture at a time if it won't include all the SIMD optimizations,
but that's a tradeoff that is up to the one deciding to do such an
universal build.
This also fixes builds for i386. The blake3 source code automatically
enables the SIMD implementations when building for i386, but we don't
provide the sources for that build configuration.
Differential Revision: https://reviews.llvm.org/D122884
COFF symbols don't have anything corresponding to a `.hidden` flag;
both GNU binutils as and LLVM's built-in assembler errors out on
these directives.
This reverts one part of
7f05aa2d4c, fixing builds for
mingw x86_64.
Differential Revision: https://reviews.llvm.org/D122893
* Support compiling with clang-5
* Check for `LLVM_DISABLE_ASSEMBLY_FILES` and have it set by
`compiler-rt/lib/sanitizer_common/symbolizer/scripts/build_symbolizer.sh`
which wants to receive and process only bitcode files.
If the `ExternalFS` has already remapped a path then the
`RedirectingFileSystem` should not change it to the originally provided
path. This fixes the original path always being used if multiple VFS
overlays were provided and the path wasn't found in the highest (ie.
first in the chain).
This also renames `IsVFSMapped` to `ExposesExternalVFSPath` and only
sets it if `UseExternalName` is true. This flag then represents that the
`Status` has an external path that's different from its virtual path.
Right now the contained path is still the external path, but further PRs
will change this to *always* be the virtual path. Clients that need the
external can then request it specifically.
Note that even though `ExposesExternalVFSPath` isn't set for all
VFS-mapped paths, `IsVFSMapped` was only being used by a hack in
`FileManager` that was specific to module searching. In that case
`UseExternalNames` is always `true` and so that hack still applies.
Resolves rdar://90578880 and llvm-project#53306.
Differential Revision: https://reviews.llvm.org/D122549
DXIL is wrapped in a container format defined by the DirectX 11
specification. Codebases differ in calling this format either DXBC or
DXILContainer.
Since eventually we want to add support for DXBC as a target
architecture and the format is used by DXBC and DXIL, I've termed it
DXContainer here.
Most of the changes in this patch are just adding cases to switch
statements to address warnings.
Reviewed By: pete
Differential Revision: https://reviews.llvm.org/D122062
Fleshing this out now allows me to rely on enum math to translate
values rather than having to translate the off cases.
I should have added this in the first pass, but wasn't thinking about
it.
Bringing in HLSL as a language as well as language options for each of
the HLSL language standards.
While the HLSL language is unimplemented, this patch adds the
HLSL-specific preprocessor defines which enables testing of the command
line options through the driver.
Reviewed By: pete, rnk
Differential Revision: https://reviews.llvm.org/D122087
In contrast to Linux it does not provide entries which can be readlinked
-- these are just regular files, not giving the expected outcome. That's
on top of procfs not being mounted by default to begin with.
This is probably the case on other BSDs as well, so I expect there will
be more ifdefs added down the road.
Reviewed By: emaste, dim
Differential Revision: https://reviews.llvm.org/D122545
It's unusual that BLAKE3/CMakeLists.txt just defines a list of
files that it injects into its parent scope. The list should either
be defined in llvm/lib/Support/CMakeLists.txt, or
llvm/lib/Support/BLAKE3/CMakeLists.txt should define an object
library.
This does the latter. It makes llvm/lib/Support/BLAKE3/CMakeLists.txt
more self-contained.
No behavior change.
Differential Revision: https://reviews.llvm.org/D122428
Changes from original BLAKE3 sources:
* `blake.h`:
* Changes to avoid conflicts if a client also links with its own BLAKE3 version:
* Renamed the header macro guard with `LLVM_C_` prefix
* Renamed the C symbols to add the `llvm_` prefix
* Added a top header comment that references the CC0 license and points to the `LICENSE` file in the repo.
* `blake3_impl.h`: Added `#define`s to remove some of `llvm_` prefixes for the rest of the internal implementation.
* Implementation files:
* Added a top header comment for `blake.c`
* Used `llvm_` prefix for the C public API functions
* Used `LLVM_LIBRARY_VISIBILITY` for internal implementation functions
* Added `.private_extern`/`.hidden` in assembly files to reduce visibility of the internal implementation functions
* `README.md`:
* added a note about where the sources originated from
* Used the C++ BLAKE3 class and `llvm_` prefixed C API in place of examples and API documentation.
* Removed instructions about how to build the files.
BLAKE3 is a cryptographic hash function that is secure and very performant.
The C implementation originates from https://github.com/BLAKE3-team/BLAKE3/tree/1.3.1/c
License is at https://github.com/BLAKE3-team/BLAKE3/blob/1.3.1/LICENSE
This patch adds:
* `llvm/include/llvm-c/blake3.h`: The BLAKE3 C API
* `llvm/include/llvm/Support/BLAKE3.h`: C++ wrapper of the C API
* `llvm/lib/Support/BLAKE3`: Directory containing the BLAKE3 C implementation files, including the `LICENSE` file
* `llvm/unittests/Support/BLAKE3Test.cpp`: unit tests for the BLAKE3 C++ wrapper
This initial patch contains the pristine BLAKE3 sources, a follow-up patch will introduce
LLVM-specific prefixes to avoid conflicts if a client also links with its own BLAKE3 version.
And here's some timings comparing BLAKE3 with LLVM's SHA1/SHA256/MD5.
Timings include `AVX512`, `AVX2`, `neon`, and the generic/portable implementations.
The table shows the speed-up multiplier of BLAKE3 for hashing 100 MBs:
| Processor | SHA1 | SHA256 | MD5 |
|-------------------------|-------|--------|------|
| Intel Xeon W (AVX512) | 10.4x | 27x | 9.4x |
| Intel Xeon W (AVX2) | 6.5x | 17x | 5.9x |
| Intel Xeon W (portable) | 1.3x | 3.3x | 1.1x |
| M1Pro (neon) | 2.1x | 4.7x | 2.8x |
| M1Pro (portable) | 1.1x | 2.4x | 1.5x |
Differential Revision: https://reviews.llvm.org/D121510
This improves the getHostCPUName check for Apple M1 CPUs, which
previously would always be considered cyclone instead. This also enables
`-march=native` support when building on M1 CPUs which would previously
fail. This isn't as sophisticated as the X86 CPU feature checking which
consults the CPU via getHostCPUFeatures, but this is still better than
before. This CPU selection could also be invalid if this was run on an
iOS device instead, ideally we can improve those cases as they come up.
Differential Revision: https://reviews.llvm.org/D119788
1. Extract createTable and getHashTable functions.
2. Add the inline attribute to the getMinBucketToReserveForEntries function.
3. Remove unnecessary local variable HTSize.
Statements in the following order appear in llvm::StringMapImpl::init and llvm::StringMapImpl::RehashTable, so I extracted this code into a function. getHashTable is for the same reason, it appears in llvm::StringMapImpl::FindKey, llvm::StringMapImpl::LookupBucketFor and llvm::StringMapImpl::RehashTable.
```
auto **Table = static_cast<StringMapEntryBase **>(safe_calloc(
NewNumBuckets + 1, sizeof(StringMapEntryBase **) + sizeof(unsigned)));
// Allocate one extra bucket, set it to look filled so the iterators stop at
// end.
Table[NewNumBuckets] = (StringMapEntryBase *)2;
```
```
unsigned *HashTable = (unsigned *)(TheTable + NumBuckets + 1);
```
Reviewed By: skan, sepavloff
Differential Revision: https://reviews.llvm.org/D121934
This patch adds triple support for:
* dxil architecture
* shadermodel OS (with version parsing)
* shader stages as environment
Reviewed By: MaskRay, pete
Differential Revision: https://reviews.llvm.org/D122031
For now most are implemented by printing out the name of the filesystem,
but this can be expanded in the future. Only `OverlayFileSystem` and
`RedirectingFileSystem` are properly implemented in this patch.
- `OverlayFileSystem`: Prints each filesystem in the order that any
operations are actually run on them. Optionally prints recursively.
- `RedirectingFileSystem`: Prints out all mappings, as well as the
`ExternalFS`. Most of this was already implemented other than the
handling for the `DirectoryRemap` case and to actually print out the
mapping.
Each FS should implement `printImpl` rather than `print`, where the
latter just fowards to the former. This is to avoid spreading the
default arguments through to the subclasses (where we may miss updating
in the future).
Differential Revision: https://reviews.llvm.org/D121421
Currently we allow half types in vectors if the scalar Zfh extension
is enabled. This behavior is not inline with the vector spec. For f32
and f64 types, the Zve32f, Zve64f, Zve64d, and V explicitly control
the availablity of floating point types in vectors.
In order to make our compiler compliant, we either need to remove all support
for half in vectors or we need an extension to control it.
Draft spec here https://github.com/riscv/riscv-v-spec/pull/780
Reviewed By: kito-cheng
Differential Revision: https://reviews.llvm.org/D121345
The rest of LLVM uses `print` for the method taking the `raw_ostream`
and `dump` only for the method with no parameters. Use the same for
`RedirectingFileSystem`.
Differential Revision: https://reviews.llvm.org/D121494
With a sufficiently large output buffer, the only failure is Z_MEM_ERROR.
Check it and call the noreturn report_bad_alloc_error if applicable.
resize_for_overwrite may call report_bad_alloc_error as well.
Now that there is no other error type, we can replace the return type with void
and simplify call sites.
Reviewed By: ikudrin
Differential Revision: https://reviews.llvm.org/D121512
WG14 adopted N2775 (http://www.open-std.org/jtc1/sc22/wg14/www/docs/n2775.pdf)
at our Feb 2022 meeting. This paper adds a literal suffix for
bit-precise types that automatically sizes the bit-precise type to be
the smallest possible legal _BitInt type that can represent the literal
value. The suffix chosen is wb (for a signed bit-precise type) which
can be combined with the u suffix (for an unsigned bit-precise type).
The preprocessor continues to operate as-if all integer types were
intmax_t/uintmax_t, including bit-precise integer types. It is a
constraint violation if the bit-precise literal is too large to fit
within that type in the context of the preprocessor (when still using
a pp-number preprocessing token), but it is not a constraint violation
in other circumstances. This allows you to make bit-precise integer
literals that are wider than what the preprocessor currently supports
in order to initialize variables, etc.
Early adoption of new technologies or adjusting certain code generation/IR optimization thresholds
is often available through some cl::opt options (which have unstable surfaces).
Specifying such an option twice will lead to an error.
```
% clang -c a.c -mllvm -disable-binop-extract-shuffle -mllvm -disable-binop-extract-shuffle
clang (LLVM option parsing): for the --disable-binop-extract-shuffle option: may only occur zero or one times!
% clang -c a.c -mllvm -hwasan-instrument-reads=0 -mllvm -hwasan-instrument-reads=0
clang (LLVM option parsing): for the --hwasan-instrument-reads option: may only occur zero or one times!
% clang -c a.c -mllvm --scalar-evolution-max-arith-depth=32 -mllvm --scalar-evolution-max-arith-depth=16
clang (LLVM option parsing): for the --scalar-evolution-max-arith-depth option: may only occur zero or one times!
```
The option is specified twice, because there is sometimes a global setting and
a specific file or project may need to override (or duplicately specify) the
value.
The error is contrary to the common practice of getopt/getopt_long command line
utilities that let the last option win and the `getLastArg` behavior used by
Clang driver options. I have seen such errors for several times. I think the
error just makes users inconvenient, while providing very little value on
discouraging production usage of unstable surfaces (this goal is itself
controversial, because developers might not want to commit to a stable surface
too early, or there is just some subtle codegen toggle which is infeasible to
have a driver option). Therefore, I suggest we drop the diagnostic, at least
before the diagnostic gets sufficiently better support for the overridding needs.
Removing the error is a degraded error checking experience. I think this error
checking behavior, if desirable, should be enabled explicitly by tools. Users
preferring the behavior can figure out a way to do so.
Reviewed By: jhenderson, rnk
Differential Revision: https://reviews.llvm.org/D120455
The crypto extension have several shorthand extensions that don't consist of any extra instructions.
Take `zk` for example, while the extension would imply `zkn, zkr, zkt`. The 3 extensions should also
combine back into `zk` to maintain the canonical order in isa strings.
This patch addresses the above.
Reviewed By: VincentWu
Differential Revision: https://reviews.llvm.org/D119530
This commit adds support for processing tablegen include files, and importing
various information from ODS. This includes operations, attribute+type constraints,
attribute/operation/type interfaces, etc. This will allow for much more robust tooling,
and also allows for referencing ODS constructs directly within PDLL (imported interfaces
can be used as constraints, operation result names can be used for member access, etc).
Differential Revision: https://reviews.llvm.org/D119900
This patch added the MC layer support of Zfinx extension.
Authored-by: StephenFan
Co-Authored-by: Shao-Ce Sun
Reviewed By: asb
Differential Revision: https://reviews.llvm.org/D93298
WithColor has an "auto detection mode" which looks whether the
corresponding whether the corresponding cl::opt is enabled or not. While
this is great when opting into cl::opt, it's not so great for downstream
users of this utility, which might have their own competing options to
enable or disable colors. The WithColor constructor takes a color mode,
but the big benefit of the class are its static error and warning
helpers and default error handlers.
In order to allow users of this utility to enable or disable colors
globally, this patch adds the ability to specify a global auto detection
function. By default, the auto detection function behaves the way that
it does today. The benefit of this patch lies in that it can be
overwritten. In addition to a ability to change the auto detection
function, I've also made it possible to get your hands on the default
auto detection function, so you swap it back if if you so desire.
This patch allow downstream users (like LLDB) to globally disable colors
with its own command line flag.
Differential revision: https://reviews.llvm.org/D120593
WithColor has an "auto detection mode" which looks whether the
corresponding whether the corresponding cl::opt is enabled or not. While
this is great when opting into cl::opt, it's not so great for downstream
users of this utility, which might have their own competing options to
enable or disable colors. The WithColor constructor takes a color mode,
but the big benefit of the class are its static error and warning
helpers and default error handlers.
In order to allow users of this utility to enable or disable colors
globally, this patch adds the ability to specify a global auto detection
function. By default, the auto detection function behaves the way that
it does today. The benefit of this patch lies in that it can be
overwritten. In addition to a ability to change the auto detection
function, I've also made it possible to get your hands on the default
auto detection function, so you swap it back if if you so desire.
This patch allow downstream users (like LLDB) to globally disable colors
with its own command line flag.
Differential revision: https://reviews.llvm.org/D120593
Xiang1 Zhang