This patch introduces a new infrastructure that is used to select the load and
store instructions in the PPC backend.
The primary motivation is that the current implementation of selecting load/stores
is dependent on the ordering of patterns in TableGen. Given this limitation, we
are not able to easily and reliably generate the P10 prefixed load and stores
instructions (such as when the immediates that fit within 34-bits). This
refactoring is meant to provide us with more control over the patterns/different
forms to exploit, as well as eliminating dependency of pattern declaration in TableGen.
The idea of this refactoring is that it introduces a set of addressing modes that
correspond to different instruction formats of a particular load and store
instruction, along with a set of common flags that describes a load/store.
Whenever a load/store instruction is being selected, we analyze the instruction
and compute a set of flags for it. The computed flags are then used to
select the most optimal load/store addressing mode.
This patch is the first of a series of patches to be committed - it contains the
initial implementation of the refactored load/store selection infrastructure and
also updates P8/P9 patterns to adopt this infrastructure. The idea is that
incremental patches will add more implementation and support, and eventually
the old implementation will be removed.
Differential Revision: https://reviews.llvm.org/D93370
- Add new variantKinds for the symbol's variable offset and region handle
- Print the proper relocation specifier @gd in the asm streamer when emitting
the TC Entry for the variable offset for the symbol
- Fix the switch section failure between the TC Entry of variable offset and
region handle
- Put .__tls_get_addr symbol in the ProgramCodeSects with XTY_ER property
Reviewed by: sfertile
Differential Revision: https://reviews.llvm.org/D100956
This patch enables support on SPE for constrained arithmetic and
comparison operations. This fixes bugzilla 50070.
One thing not covered is fcmp vs. fcmps on SPE. Some condition code
generates singaling comparison while some not. In this patch, all are
considered as singaling. So there might be still some issue when
compiling from C code.
Reviewed By: jhibbits
Differential Revision: https://reviews.llvm.org/D101282
Extend shuffle canonicalization and conversion of shuffles fed by vectorized
scalars to big endian subtargets. For big endian subtargets, loads and direct
moves of scalars into vector registers put the data in the correct element for
SCALAR_TO_VECTOR if the data type is 8 bytes wide. However, if the data type is
narrower, the value still ends up in the wrong place - althouth a different
wrong place than on little endian targets.
This patch extends the combine that keeps values where they are if they feed a
shuffle to big endian targets.
Differential revision: https://reviews.llvm.org/D100478
This patch is the last one in backend to support fp128 type in
pre-POWER9 subtargets with VSX, removing temporary option and updating
remaining tests.
Reviewed By: steven.zhang
Differential Revision: https://reviews.llvm.org/D92374
We should consider the feeder user number when we do reverse memory
operation transformation. Otherwise, we may get negative impact.
Reviewed By: nemanjai
Differential Revision: https://reviews.llvm.org/D100166
XSCMPUQP is not available for pre-P9 subtargets. This patch will lower
them into libcall for correct behavior on power7/power8.
Reviewed By: steven.zhang
Differential Revision: https://reviews.llvm.org/D92083
This patch exploits the xxsplti32dx instruction available on Power10
in place of constant pool loads where xxspltidp would not be able to,
usually because the immediate cannot fit into 32 bits.
Differential Revision: https://reviews.llvm.org/D95458
There are some instances where we produce constants of type MVT::i64
unconditionally in the target DAG combines. This is not actually
valid in 32-bit mode.
Add support for the TLS general dynamic access model to assembly
files on AIX 64-bit.
Reviewed By: sfertile
Differential Revision: https://reviews.llvm.org/D98078
Adds support for the TLS general dynamic access model to
assembly files on AIX 32-bit.
To generate the correct code sequence when accessing a TLS variable
`v`, we first create two TOC entry nodes, one for the variable offset, one
for the region handle. These nodes are followed by a `PPCISD::TLSGD_AIX`
node (new node introduced by this patch).
The `PPCISD::TLSGD_AIX` node (`TLSGDAIX` pseudo instruction) is
expanded to 2 copies (to put the variable offset and region handle in
the right registers) and a call to `__tls_get_addr`.
This patch also changes the way TC entries are generated in asm files.
If the generated TC entry is for the region handle of a TLS variable,
we add the `@m` relocation and the `.` prefix to the entry name.
For example:
```
L..C0:
.tc .v[TC],v[TL]@m -> region handle
L..C1:
.tc v[TC],v[TL] -> variable offset
```
Reviewed By: nemanjai, sfertile
Differential Revision: https://reviews.llvm.org/D97948
Patch adds support for passing vector call operands to variadic
functions. Arguments which are fixed shadow GPRs and stack space even
when they are passed in vector registers, while arguments passed through
ellipses are passed in properly aligned GPRs if available and on the
stack once all GPR arguments registers are consumed.
Differential Revision: https://reviews.llvm.org/D97956
This patch adds support for the default AltiVec ABI for AIX.
Vector registers 20 through 31 are marked as reserved and cannot
be used in the default ABI. This patch adds handling for this case
and also remove the default AltiVec ABI errors.
Reviewed By: sfertile
Differential Revision: https://reviews.llvm.org/D96351
Patch adds support for passing vector arguments to variadic functions.
Arguments which are fixed shadow GPRs and stack space even when they are
passed in vector registers, while arguments passed through ellipses are
passed in(properly aligned GPRs if available and on the stack once all
GPR arguments registers are consumed.
Differential Revision: https://reviews.llvm.org/D97485
This patch allows generating TLS variables in assembly files on AIX.
Initialized and external uninitialized variables are generated with the
.csect pseudo-op and local uninitialized variables are generated with
the .comm/.lcomm pseudo-ops. The patch also adds a check to
explicitly say that TLS is not yet supported on AIX.
Reviewed by: daltenty, jasonliu, lei, nemanjai, sfertile
Originally patched by: bsaleil
Commandeered by: NeHuang
Differential Revision: https://reviews.llvm.org/D96184
This patch generates the vinsw, vinsd, vinsblx, vinshlx, vinswlx, vinsdlx,
vinsbrx, vinshrx, vinswrx and vinsdrx instructions for vector insertion on P10.
Differential Revision: https://reviews.llvm.org/D94454
We are going to support debug sections for XCOFF. So the csect
properties are not necessary. This patch makes these properties
optional.
Reviewed By: hubert.reinterpretcast
Differential Revision: https://reviews.llvm.org/D95931
Do not defer to the base class when the register constraint is a
physical fpr. The base class will select SPILLTOVSRRC as the register
class and register allocation will fail on subtargets without VSX
registers.
Differential Revision: https://reviews.llvm.org/D91629
Some cases may be transformed into 32 bit splats before hitting the boolean statement, which may cause incorrect behaviour and provide XXSPLTI32DX with the incorrect values of splat. The condition was reversed so that the shortcut prevents this problem.
Differential Revision: https://reviews.llvm.org/D95634
If the APInt returned by BuildVectorSDNode::isConstantSplat() is narrower than
64 bits, the result produced by XXSPLTI32DX is incorrect. The result returned
by the function appears to be incorrect and we'll investigate/fix it in a
follow-up commit. However, since this causes miscompiles, we must
temporarily disable emitting this instruction for such values.
For now, we correct the result for sqrt if iteration > 0. This doesn't make
sense as they are not strict relative.
Reviewed By: dmgreen, spatel, RKSimon
Differential Revision: https://reviews.llvm.org/D94480
Exploits the instruction xxsplti32dx.
It can be used to materialize any 64 bit scalar/vector splat by using two instances, one for the upper 32 bits and the other for the lower 32 bits. It should not materialize the cases which can be materialized by using the instruction xxspltidp.
Differential Revision: https://https://reviews.llvm.org/D90173
As of 8dacca943a, we sign extend the atomic loaded
operand for signed subword comparisons. However, the assumption that the other
operand is correctly sign extended doesn't always hold. This patch sign extends
the other operand if it needs to be sign extended.
This is a second fix for https://bugs.llvm.org/show_bug.cgi?id=30451
Differential revision: https://reviews.llvm.org/D94058
PowerPC cores like e200z759n3 [1] using an efpu2 only support single precision
hardware floating point instructions. The single precision instructions efs*
and evfs* are identical to the spe float instructions while efd* and evfd*
instructions trigger a not implemented exception.
This patch introduces a new command line option -mefpu2 which leads to
single-hardware / double-software code generation.
[1] Core reference:
https://www.nxp.com/files-static/32bit/doc/ref_manual/e200z759CRM.pdf
Differential revision: https://reviews.llvm.org/D92935
The piece of code tries to use splat+shift to lower build_vector with
repeating bit pattern. And immediate field of vector splat is only 5
bits (-16~15). It iterates over them one by one to find which
shifts/rotates to number in build_vector.
This patch removes code to try matching constant with algebraic
right-shift because that's meaningless - any negative number's algebraic
right-shift won't produce result smaller than itself. Besides, code
(int)((unsigned)i >> j) means logical shift-right in C.
Reviewed By: RKSimon
Differential Revision: https://reviews.llvm.org/D93937
In `PPCTargetLowering::DAGCombineTruncBoolExt`, when checking if it's correct to perform the transformation for non-sign comparison, as the comment says
```
// This is neither a signed nor an unsigned comparison, just make sure
// that the high bits are equal.
```
Origin check
```
if (Op1Known.Zero != Op2Known.Zero || Op1Known.One != Op2Known.One)
return SDValue();
```
is not strong enough. For example,
```
Op1Known = 111x000x;
Op2Known = 111x000x;
```
Bit 4, besides bit 0, is still unknown and affects the final result.
This patch fixes https://bugs.llvm.org/show_bug.cgi?id=48388.
Reviewed By: nemanjai, #powerpc
Differential Revision: https://reviews.llvm.org/D93092
On PPC, the vector pair instructions are independent from MMA.
This patch renames the vector pair LLVM intrinsics and Clang builtins to replace the _mma_ prefix by _vsx_ in their names.
We also move the vector pair type/intrinsic/builtin tests to their own files.
Differential Revision: https://reviews.llvm.org/D91974
X86 and AArch64 expand it as libcall inside the target. And PowerPC also
want to expand them as libcall for P8. So, propose an implement in the
legalizer to common the logic and remove the code for X86/AArch64 to
avoid the duplicate code.
Reviewed By: Craig Topper
Differential Revision: https://reviews.llvm.org/D91331
The runtime library has two family library implementation for ppc_fp128 and fp128.
For IBM Long double(ppc_fp128), it is suffixed with 'l', i.e(sqrtl). For
IEEE Long double(fp128), it is suffixed with "ieee128" or "f128".
We miss to map several libcall for IEEE Long double.
Reviewed By: qiucf
Differential Revision: https://reviews.llvm.org/D91675
Some of the pattern matching in PPCInstrVSX.td and node lowering involving vectors assumes 64bit mode. This patch disables some of the unsafe pattern matching and lowering of BUILD_VECTOR in 32bit mode.
Reviewed By: Xiangling_L
Differential Revision: https://reviews.llvm.org/D92789
SUMMARY:
1. added a new option -xcoff-traceback-table to control whether generate traceback table for function.
2. implement the functionality of emit traceback table of a function.
Reviewers: hubert.reinterpretcast, Jason Liu
Differential Revision: https://reviews.llvm.org/D92398
Weak functions can be replaced by other functions at link time. Previously it
was assumed that no matter what the weak callee function was replaced with it
would still share the same TOC as the caller. This is no longer true as a weak
callee with a TOC setup can be replaced by another function that was compiled
with PC Relative and does not have a TOC at all.
This patch makes sure that all calls to functions defined as weak from a caller
that has a valid TOC have a nop after the call to allow a place for the linker
to restore the TOC.
Reviewed By: NeHuang
Differential Revision: https://reviews.llvm.org/D91983
A simple SELECT is used for converting i1 to floating types on ppc32,
but in constrained cases, the chain is not handled properly. This patch
will fix that.
Reviewed By: steven.zhang
Differential Revision: https://reviews.llvm.org/D92365
PowerPC ISA support the input test for vector type v4f32 and v2f64.
Replace the software compare with hw test will improve the perf.
Reviewed By: ChenZheng
Differential Revision: https://reviews.llvm.org/D90914
In lowering of FLT_ROUNDS_, FPSCR content will be moved into FP register
and then GPR, and then truncated into word.
For subtargets without direct move support, it will store and then load.
The load address needs adjustment (+4) only on big-endian targets. This
patch fixes it on using generic opcodes on little-endian and subtargets
with direct-move.
Reviewed By: steven.zhang
Differential Revision: https://reviews.llvm.org/D91845
i1 is the native type for PowerPC if crbits is enabled. However, we need
to promote the i1 to i64 as we didn't have the pattern for i1.
Reviewed By: Qiu Chao Fang
Differential Revision: https://reviews.llvm.org/D92067
For now, we will hardcode the result as 0.0 if the input is denormal or 0. That will
have the impact the precision. As the fsqrt added belong to the cold path of the
cmp+branch, it won't impact the performance for normal inputs for PowerPC, but improve
the precision if the input is denormal.
Reviewed By: Spatel
Differential Revision: https://reviews.llvm.org/D80974
This patch enables passing non variadic vector type parameters on the caller and callee side and vector return on AIX that are passed in vector registers only.
So far, support is enabled for only the AIX extended Altivec ABI Calling convention.
Reviewed By: sfertile, DiggerLin
Differential Revision: https://reviews.llvm.org/D86476
If smax() is legal, this is likely to result in smaller codegen expansion for abs(x) than the xor(add,ashr) method.
This is also what PowerPC has been doing for its abs implementation, so it lets us get rid of a load of custom lowering code there (and which was never updated when they added smax lowering).
Alive2: https://alive2.llvm.org/ce/z/xRk3cD
Differential Revision: https://reviews.llvm.org/D92095
PowerPC has instruction ftsqrt/xstsqrtdp etc to do the input test for software square root.
LLVM now tests it with smallest normalized value using abs + setcc. We should add hook to
target that has test instructions.
Reviewed By: Spatel, Chen Zheng, Qiu Chao Fang
Differential Revision: https://reviews.llvm.org/D80706
For now, we are using the GPR to pass the arguments/return value for fp128 on Power8,
which is incorrect. It should be VSR. The reason why we do it this way is that,
we are setting the fp128 as illegal which make LLVM try to emulate it with i128 on
Power8. So, we need to correct it as legal.
Reviewed By: Nemanjai
Differential Revision: https://reviews.llvm.org/D91527
Added support for the options mabi=vec-extabi and mabi=vec-default which are analogous to qvecnvol and qnovecnvol when using XL on AIX.
The extended Altivec ABI on AIX is enabled using mabi=vec-extabi in clang and vec-extabi in llc.
Reviewed By: Xiangling_L, DiggerLin
Differential Revision: https://reviews.llvm.org/D89684
When the operand to an (s/u)int_to_fp node is an illegally typed load we
cannot reuse the load address since we can not build a proper dependancy
chain. The legalized loads will use a different chain output then the
illegal load. If we reuse the load address then we will build a
conversion node that uses the chain of the illegal load and operations
which modify the memory address in the other dependancy chain can be
scheduled before the floating point load which feeds the conversion.
Differential Revision: https://reviews.llvm.org/D91265
The default version only works if the returned node has a single
result. The X86 and PowerPC versions support multiple results
and allow a single result to be returned from a node with
multiple outputs. And allow a single result that is not result 0
of the node.
Also replace the Mips version since the new version should work
for it. The original version handled multiple results, but only
if the new node and original node had the same number of results.
Differential Revision: https://reviews.llvm.org/D91846
When converting a BUILD_VECTOR or VECTOR_SHUFFLE to a splatting load
as of 1461fb6e78, we inaccurately check
for a single user of the load and neglect to update the users of the
output chain of the original load. As a result, we can emit a new
load when the original load is kept and the new load can be reordered
after a dependent store. This patch fixes those two issues.
Fixes https://bugs.llvm.org/show_bug.cgi?id=47891
Turn on TLS support for PCRel by default and update the test cases.
Differential Revision: https://reviews.llvm.org/D88738
Reviewed by: stefanp, kamaub
MULH is often expanded on targets.
This patch removes the isMulhCheaperThanMulShift hook and uses
isOperationLegalOrCustom instead.
Differential Revision: https://reviews.llvm.org/D80485
In most of lib/Target we know that we are not dealing with scalable
types so it's perfectly fine to replace TypeSize comparison operators
with their fixed width equivalents, making use of getFixedSize()
and so on.
Differential Revision: https://reviews.llvm.org/D89101
This patch adds support for assemble disassemble intrinsics
for MMA.
Reviewed By: bsaleil, #powerpc
Differential Revision: https://reviews.llvm.org/D88739
Summary: This patch is derived from D87384.
In this patch we expand the existing decomposition of mul-by-constant to be more general by implementing 2 patterns:
```
mul x, (2^N + 2^M) --> (add (shl x, N), (shl x, M))
mul x, (2^N - 2^M) --> (sub (shl x, N), (shl x, M))
```
The conversion will be trigged if the multiplier is a big constant that the target can't use a single multiplication instruction to handle. This is controlled by the hook `decomposeMulByConstant`.
More over, the conversion benefits from an ILP improvement since the instructions are independent. A case with the sequence like following also gets benefit since a shift instruction is saved.
```
*res1 = a * 0x8800;
*res2 = a * 0x8080;
```
Reviewed By: spatel
Differential Revision: https://reviews.llvm.org/D88201
getNode handling for ISD:SETCC calls FoldSETCC which can canonicalize
FP constants to the RHS. When this happens we should create the node
with the FMF that was requested. By using FlagInserter when can ensure
any calls to getNode/getSetcc during canonicalization will also get the flags.
Differential Revision: https://reviews.llvm.org/D88063
It looks like in some circumstances when compiling with `-mcpu=pwr9` we create an EXTSWSLI node when which causes llc to fail. No such error occurs in pwr8 or lower.
This occurs in 32BIT AIX and BE Linux. the cause seems to be that the default return in combineSHL is to create an EXTSWSLI node. Adding a check for whether we are in PPC64 before that fixes the issue.
Reviewed By: #powerpc, nemanjai
Differential Revision: https://reviews.llvm.org/D87046
After removal of Darwin as a PowerPC subtarget, the VRSAVE
save/restore/spill/update code is no longer needed by any supported
subtarget, so remove it while keeping support for vrsave and related instruction
aliases for inline asm. I've pre-commited tests to document the existing vrsave
handling in relation to @llvm.eh.unwind.init and inline asm usage, as
well as a test which shows a beahviour change on AIX related to
returning vector type as we were wrongly emiting VRSAVE_UPDATE on AIX.
This patch legalizes the v256i1 and v512i1 types that will be used for MMA.
It implements loads and stores of these types.
v256i1 is a pair of VSX registers, so for this type, we load/store the two
underlying registers. v512i1 is used for MMA accumulators. So in addition to
loading and storing the 4 associated VSX registers, we generate instructions to
prime (copy the VSX registers to the accumulator) after loading and unprime
(copy the accumulator back to the VSX registers) before storing.
This patch also adds the UACC register class that is necessary to implement the
loads and stores. This class represents accumulator in their unprimed form and
allow the distinction between primed and unprimed accumulators to avoid invalid
copies of the VSX registers associated with primed accumulators.
Differential Revision: https://reviews.llvm.org/D84968
This patch implements the vec_[all|any]_[eq | ne | lt | gt | le | ge] builtins for vector signed/unsigned __int128.
Differential Revision: https://reviews.llvm.org/D87910
This patch is the initial support for the Local Dynamic Thread Local Storage
model to produce code sequence and relocation correct to the ABI for the model
when using PC relative memory operations.
Differential Revision: https://reviews.llvm.org/D87721
This is a follow-up of D86605. For strict DAG FP node, if its FP
exception behavior metadata is ignore, it should have nofpexcept flag.
But during custom lowering, this flag isn't passed down.
This is also seen on X86 target.
Reviewed By: uweigand
Differential Revision: https://reviews.llvm.org/D87390
llc would crash for (store (fptosi-f128-i32)) when -mcpu=pwr8, we should
not generate FP_TO_(S|U)INT_IN_VSR for f128 types at this time. This
patch fixes it.
Reviewed By: steven.zhang
Differential Revision: https://reviews.llvm.org/D86686
This patch is the initial support for the Local Exec Thread Local
Storage model to produce code sequence and relocations correct
to the ABI for the model when using PC relative memory operations.
Patch by: Kamau Bridgeman
Differential Revision: https://reviews.llvm.org/D83404
22a0edd0 introduced a config IsStrictFPEnabled, which controls the
strict floating point mutation (transforming some strict-fp operations
into non-strict in ISel). This patch disables the mutation by default
since we've finished PowerPC strict-fp enablement in backend.
Reviewed By: uweigand
Differential Revision: https://reviews.llvm.org/D87222
In standard C library, both rint and nearbyint returns rounding result
in current rounding mode. But nearbyint never raises inexact exception.
On PowerPC, x(v|s)r(d|s)pic may modify FPSCR XX, raising inexact
exception. So we can't select constrained fnearbyint into xvrdpic.
One exception here is xsrqpi, which will not raise inexact exception, so
fnearbyint f128 is okay here.
Reviewed By: uweigand
Differential Revision: https://reviews.llvm.org/D87220
This removes the after the fact FMF handling from D46854 in favor of passing fast math flags to getNode. This should be a superset of D87130.
This required adding a SDNodeFlags to SelectionDAG::getSetCC.
Now we manage to contant fold some stuff undefs during the
initial getNode that we don't do in later DAG combines.
Differential Revision: https://reviews.llvm.org/D87200
Libcall __gcc_qtou is not available, which breaks some tests needing
it. On PowerPC, we have code to manually expand the operation, this
patch applies it to constrained conversion. To keep it strict-safe,
it's using the algorithm similar to expandFP_TO_UINT.
For constrained operations marking FP exception behavior as 'ignore',
we should set the NoFPExcept flag. However, in some custom lowering
the flag is missed. This should be fixed by future patches.
Reviewed By: uweigand
Differential Revision: https://reviews.llvm.org/D86605
Quite a while ago, we legalized these nodes as we added custom
handling for reciprocal estimates in the back end. We have since
moved to target-independent combines but neglected to turn off
legalization. As a result, we can now get selection failures on
non-VSX subtargets as evidenced in the listed PR.
Fixes: https://bugs.llvm.org/show_bug.cgi?id=47373
This patch implements the builtins for Vector Load with Zero and Signed Extend Builtins (lxvr_x for b, h, w, d), and adds the appropriate test cases for these builtins. The builtins utilize the vector load instructions itnroduced with ISA 3.1.
Differential Revision: https://reviews.llvm.org/D82502#inline-797941
Current custom lowering of truncate vector handles a source of up to 128 bits, but that only uses one of the two shuffle vector operands. Extend it to use both operands to handle 256 bit sources.
Differential Revision: https://reviews.llvm.org/D68035
This patch makes these operations legal, and add necessary codegen
patterns.
There's still some issue similar to D77033 for conversion from v1i128
type. But normal type tests synced in vector-constrained-fp-intrinsic
are passed successfully.
Reviewed By: uweigand
Differential Revision: https://reviews.llvm.org/D83654
This patch adds support for constrained scalar int to fp operations on
PowerPC. Besides, this also fixes the FP exception bit of FCFID*
instructions.
Reviewed By: steven.zhang, uweigand
Differential Revision: https://reviews.llvm.org/D81669
This patch is the initial support for the Intial Exec Thread Local
Local Storage model to produce code sequence and relocations correct
to the ABI for the model when using PC relative memory operations.
Reviewed By: stefanp
Differential Revision: https://reviews.llvm.org/D81947
This patch is the initial support for the General Dynamic Thread Local
Local Storage model to produce code sequence and relocations correct
to the ABI for the model when using PC relative memory operations.
Patch by: NeHuang
Reviewed By: stefanp
Differential Revision: https://reviews.llvm.org/D82315
This patch adds support for constrained scalar fp to int operations on
PowerPC. Besides, this fixes the FP exception bit of quad-precision
convert & truncate instructions.
Reviewed By: steven.zhang, uweigand
Differential Revision: https://reviews.llvm.org/D81537
This patch implements the builtins for the vector shifts (shl, srl, sra), and
adds the appropriate test cases for these builtins. The builtins utilize the
vector shift instructions introduced within ISA 3.1.
Differential Revision: https://reviews.llvm.org/D83338
SUMMARY:
1. in the patch , remove setting storageclass in function .getXCOFFSection and construct function of class MCSectionXCOFF
there are
XCOFF::StorageMappingClass MappingClass;
XCOFF::SymbolType Type;
XCOFF::StorageClass StorageClass;
in the MCSectionXCOFF class,
these attribute only used in the XCOFFObjectWriter, (asm path do not need the StorageClass)
we need get the value of StorageClass, Type,MappingClass before we invoke the getXCOFFSection every time.
actually , we can get the StorageClass of the MCSectionXCOFF from it's delegated symbol.
2. we also change the oprand of branch instruction from symbol name to qualify symbol name.
for example change
bl .foo
extern .foo
to
bl .foo[PR]
extern .foo[PR]
3. and if there is reference indirect call a function bar.
we also add
extern .bar[PR]
Reviewers: Jason liu, Xiangling Liao
Differential Revision: https://reviews.llvm.org/D84765
Changes the Offset arguments to both functions from int64_t to TypeSize
& updates all uses of the functions to create the offset using TypeSize::Fixed()
Reviewed By: efriedma
Differential Revision: https://reviews.llvm.org/D85220
This patch introduces two intrinsics: llvm.ppc.setflm and
llvm.ppc.readflm. They read from or write to FPSCR register
(floating-point status & control) which contains rounding mode and
exception status.
To ensure correctness of program, we need to prevent FP operations from
being moved across these intrinsics (mffs/mtfsf instruction), so here I
set them as scheduling boundaries. We can relax such restriction if
FPSCR is modeled well in the future.
Reviewed By: steven.zhang
Differential Revision: https://reviews.llvm.org/D84914
Introduce a fatal error if any thread local storage code is compiled
using pc relative memory operations as well as a hidden override
option `-enable-ppc-pcrel-tls` so that this support can be incrementally
added if possible.
Reviewed By: #powerpc, nemanjai
Differential Revision: https://reviews.llvm.org/D85448
The custom lowering saves an instruction over the generic expansion, by
taking advantage of the fact that PowerPC shift instructions are well
defined in the shift-by-bitwidth case.
Differential Revision: https://reviews.llvm.org/D83948
For FP_TO_INT and INT_TO_FP lowering, we have direct-move and
non-direct-move methods. But they share some conversion logic, so we can
reduce redundant code by introducing new methods.
Reviewed By: steven.zhang
Differential Revision: https://reviews.llvm.org/D81818
SPE doesn't have a fsel instruction, so don't try to lower to it.
This fixes a "Cannot select: tN: f64 = PPCISD::FSEL tX, tY, tZ" error.
Reviewed By: #powerpc, lkail
Differential Revision: https://reviews.llvm.org/D77773
The patterns were incorrect copies from the FPU code, and are
unnecessary, since there's no extended load for SPE. Just let LLVM
itself do the work by marking it expand.
Reviewed By: #powerpc, lkail
Differential Revision: https://reviews.llvm.org/D78670
Summary:
Some instructions have set the wrong [RM] flag, this patch is to fix it.
Instructions x(v|s)r(d|s)pi[zmp]? and fri[npzm] use fixed rounding
directions without referencing current rounding mode.
Also, the SETRNDi, SETRND, BCLRn, MTFSFI, MTFSB0, MTFSB1, MTFSFb,
MTFSFI, MTFSFI_rec, MTFSF, MTFSF_rec should also fix the RM flag.
Reviewed By: jsji
Differential Revision: https://reviews.llvm.org/D81360
Summary:
PPC only supports the instruction selection for v16i8, v8i16, v4i32,
v2i64, v4f32 and v2f64 for ISD::SETCC, don't support the v1i128, so
v1i128 for ISD::SETCC will crash.
This patch is to set v1i128 to expand to avoid crash.
Reviewed By: steven.zhang
Differential Revision: https://reviews.llvm.org/D84238
I mixed up the precedence of operators in the assert and thought I
had it right since there was no compiler warning. This just
adds the parentheses in the expression as needed.
Unfortunately this is another regression from my canonicalization patch
(1fed131660). The patch contained two implicit assumptions:
1. That we would have a permuted load only if we are loading a partial vector
2. That a partial vector load would necessarily be as wide as the splat
However, assumption 2 is not correct since it is possible to do a wider
load and only splat a half of it. This patch corrects this assumption by
simply checking if the load is permuted and adjusting the offset if it is.
This patch aims to implement the low order vector multiply, divide and modulo
instructions available on Power10.
The patch involves legalizing the ISD nodes MUL, UDIV, SDIV, UREM and SREM for
v2i64 and v4i32 vector types in order to utilize the following instructions:
- Vector Multiply Low Doubleword: vmulld
- Vector Modulus Word/Doubleword: vmodsw, vmoduw, vmodsd, vmodud
- Vector Divide Word/Doubleword: vdivsw, vdivsd, vdivuw, vdivud
Differential Revision: https://reviews.llvm.org/D82510
Summary:
AIX assembly's .set directive is not usable for aliasing purpose.
We need to use extra-label-at-defintion strategy to generate symbol
aliasing on AIX.
Reviewed By: DiggerLin, Xiangling_L
Differential Revision: https://reviews.llvm.org/D83252
Current powerpc backend generates wrong code sequence if stack pointer
has to realign if `-fstack-clash-protection` enabled. When probing
dynamic stack allocation, current `PREPARE_PROBED_ALLOCA` takes
`NegSizeReg` as input and returns
`FinalStackPtr`. `FinalStackPtr=StackPtr+ActualNegSize` is calculated
correctly, however code following `PREPARE_PROBED_ALLOCA` still uses
value of `NegSizeReg`, which does not contain `ActualNegSize` if
`MaxAlign > TargetAlign`, to calculate loop trip count and residual
number of bytes.
This patch is part of fix of
https://bugs.llvm.org/show_bug.cgi?id=46759.
Differential Revision: https://reviews.llvm.org/D84152
store (load float*) can be optimized to store(load i32*) in InstCombine pass.
Add store (load float*) to isProfitableToHoist to make sure we don't break
the opt in InstCombine pass.
Reviewed By: jsji
Differential Revision: https://reviews.llvm.org/D82341
SUMMARY:
when we call memset, memcopy,memmove etc(this are llvm intrinsic function) in the c source code. the llvm will generate IR
like call call void @llvm.memset.p0i8.i32(i8* align 4 bitcast (%struct.S* @s to i8*), i8 %1, i32 %2, i1 false)
for c source code
bash> cat test_memset.call
struct S{
int a;
int b;
};
extern struct S s;
void bar() {
memset(&s, s.b, s.b);
}
like
%struct.S = type { i32, i32 }
@s = external global %struct.S, align 4
; Function Attrs: noinline nounwind optnone
define void @bar() #0 {
entry:
%0 = load i32, i32* getelementptr inbounds (%struct.S, %struct.S* @s, i32 0, i32 1), align 4
%1 = trunc i32 %0 to i8
%2 = load i32, i32* getelementptr inbounds (%struct.S, %struct.S* @s, i32 0, i32 1), align 4
call void @llvm.memset.p0i8.i32(i8* align 4 bitcast (%struct.S* @s to i8*), i8 %1, i32 %2, i1 false)
ret void
}
declare void @llvm.memset.p0i8.i32(i8* nocapture writeonly, i8, i32, i1 immarg) #1
If we want to let the aix as assembly compile pass without -u
it need to has following assembly code.
.extern .memset
(we do not output extern linkage for llvm instrinsic function.
even if we output the extern linkage for llvm intrinsic function, we should not out .extern llvm.memset.p0i8.i32,
instead of we should emit .extern memset)
for other llvm buildin function floatdidf . even if we do not call these function floatdidf in the c source code(the generated IR also do not the call __floatdidf . the function call
was generated in the LLVM optimized.
the function is not in the functions list of Module, but we still need to emit extern .__floatdidf
The solution for it as :
We record all the lllvm intrinsic extern symbol when transformCallee(), and emit all these symbol in the AsmPrinter::doFinalization(Module &M)
Reviewers: jasonliu, Sean Fertile, hubert.reinterpretcast,
Differential Revision: https://reviews.llvm.org/D78929
This patch adds support for constrained int/fp conversion between
signed/unsigned i32 and f32/f64.
Reviewed By: jhibbits
Differential Revision: https://reviews.llvm.org/D82747
On PPC64, for a variadic function, if va_start is not called, it won't
access any variadic argument on stack, thus we can save stores of
registers used to pass arguments.
Differential Revision: https://reviews.llvm.org/D82361
When legalizing shuffles, we make an attempt to combine it into
a PPC specific canonical form that avoids a need for a swap. If the
combine is successful, we RAUW the node and the custom legalization
replaces the now dead node instead of the one it should replace.
Remove that erroneous call to RAUW.
This patch aims to exploit the xxsplti32dx XT, IX, IMM32 instruction when lowering VECTOR_SHUFFLEs.
We implement lowerToXXSPLTI32DX when lowering vector shuffles to check if:
- Element size is 4 bytes
- The RHS is a constant vector (and constant splat of 4-bytes)
- The shuffle mask is a suitable mask for the XXSPLTI32DX instruction where it is one of the 32 masks:
<0, 4-7, 2, 4-7>
<4-7, 1, 4-7, 3>
Differential Revision: https://reviews.llvm.org/D83245
Summary:
When a desired symbol name contains invalid character that the
system assembler could not process, we need to emit .rename
directive in assembly path in order for that desired symbol name
to appear in the symbol table.
Reviewed By: hubert.reinterpretcast, DiggerLin, daltenty, Xiangling_L
Differential Revision: https://reviews.llvm.org/D82481
Summary: As Bugzilla-35090 reported, the rationale for using custom lowering SREM/UREM should no longer be true. At the IR level, the div-rem-pairs pass performs the transformation where the remainder is computed from the result of the division when both a required. We should now be able to lower these directly on P9. And the pass also fixed the problem that divide is in a different block than the remainder. This is a patch to remove redundant code and make SREM/UREM legal directly on P9.
Reviewed By: lkail
Differential Revision: https://reviews.llvm.org/D82145
This patch is part of supporting `-fstack-clash-protection`. Mainly do
such things compared to existing `lowerDynamicAlloc`
- Added a new pseudo instruction PPC::PREPARE_PROBED_ALLOC to get
actual frame pointer and final stack pointer.
- Synthesize a loop to probe by blocks.
- Use DYNAREAOFFSET to get MaxCallFrameSize which is calculated in
prologepilog.
Differential Revision: https://reviews.llvm.org/D81358
As of 1fed131660, we have code that
changes shuffle masks so that we can put the shuffle in a canonical
form that can be matched to a single instruction. However, it
does not properly account for undef elements in the BUILD_VECTOR
that is the RHS splat so we can end up with undefs where they
shouldn't be. This patch converts the splat input with undefs to
one without.
The situation where the caller uses a TOC and the callee does not
but is marked as clobbers the TOC (st_other=1) was not being compiled
correctly if both functions where in the same object file.
The call site where we had `callee` was missing a nop after the call.
This is because it was assumed that since the two functions where in
the same DSO they would be sharing a TOC. This is not the case if the
callee uses PC Relative because in that case it may clobber the TOC.
This patch makes sure that we add the cnop correctly so that the
linker has a place to restore the TOC.
Reviewers: sfertile, NeHuang, saghir
Differential Revision: https://reviews.llvm.org/D81126
Commit 1fed131660 assumed that shuffle vector canonicalization will
always ensure that the shuffle mask will be ordered so that element
zero comes from the LHS vector. However there is code out there for
which this is not the case. This patch simply removes that unsafe
assumption and makes the code work regardless of the source of the
first element.
We currently miss a number of opportunities to emit single-instruction
VMRG[LH][BHW] instructions for shuffles on little endian subtargets. Although
this in itself is not a huge performance opportunity since loading the permute
vector for a VPERM can always be pulled out of loops, producing such merge
instructions is useful to downstream optimizations.
Since VPERM is essentially opaque to all subsequent optimizations, we want to
avoid it as much as possible. Other permute instructions have semantics that can
be reasoned about much more easily in later optimizations.
This patch does the following:
- Canonicalize shuffles so that the first element comes from the first vector
(since that's what most of the mask matching functions want)
- Switch the elements that come from splat vectors so that they match the
corresponding elements from the other vector (to allow for merges)
- Adds debugging messages for when a shuffle is matched to a VPERM so that
anyone interested in improving this further can get the info for their code
Differential revision: https://reviews.llvm.org/D77448
Summary: A bug is reported in bugzilla-45628, where the swap_with_shift case can’t be matched to a single HW instruction xxswapd as expected.
In fact the case matches the idiom of rotate. We have MatchRotate to handle an ‘or’ of two operands and generate a rot[lr] if the case matches the idiom of rotate. While PPC doesn’t support ROTL v1i128. We can custom lower ROTL v1i128 to the vector_shuffle. The vector_shuffle will be matched to a single HW instruction during the phase of instruction selection.
Reviewed By: steven.zhang
Differential Revision: https://reviews.llvm.org/D81076
This patch adds handling of constrained FP intrinsics about round,
truncate and extend for PowerPC target, with necessary tests.
Reviewed By: steven.zhang
Differential Revision: https://reviews.llvm.org/D64193
On PowerPC, we have vnmsubfp Altivec instruction for fnmsub operation on
v4f32 type. Default pattern for this instruction never works since we
don't have legal fneg for v4f32 when VSX disabled.
Reviewed By: steven.zhang
Differential Revision: https://reviews.llvm.org/D80617
On PowerPC, FNMSUB (both VSX and non-VSX version) means -(a*b-c). But
the backend used to generate these instructions regardless whether nsz
flag exists or not. If a*b-c==0, such transformation changes sign of
zero.
This patch introduces PPC specific FNMSUB ISD opcode, which may help
improving combined FMA code sequence.
Reviewed By: steven.zhang
Differential Revision: https://reviews.llvm.org/D76585
These two nodes were added by 69caef2b78 in 2005
and they are not used by PowerPC backend anymore. And the ISD::FMA is a prefer
way for VMADDFP if we really want to create that node. For VNMSUBFP, we will
also add a more generic node FNMSUB in D76585 if we really want it.
Reviewed By: qiucf
Differential Revision: https://reviews.llvm.org/D80429
Summary: Exploit vabsd* for for absolute difference of vectors on P9,
for example:
void foo (char *restrict p, char *restrict q, char *restrict t)
{
for (int i = 0; i < 16; i++)
t[i] = abs (p[i] - q[i]);
}
this case should be matched to the HW instruction vabsdub.
Reviewed By: steven.zhang
Differential Revision: https://reviews.llvm.org/D80271
Let the codegen recognized the nomerge attribute and disable branch folding when the attribute is given
Differential Revision: https://reviews.llvm.org/D79537
Summary:
This patch simply adds support for the new CPU in anticipation of
Power10. There isn't really any functionality added so there are no
associated test cases at this time.
Reviewers: stefanp, nemanjai, amyk, hfinkel, power-llvm-team, #powerpc
Reviewed By: stefanp, nemanjai, amyk, #powerpc
Subscribers: NeHuang, steven.zhang, hiraditya, llvm-commits, wuzish, shchenz, cfe-commits, kbarton, echristo
Tags: #clang, #powerpc, #llvm
Differential Revision: https://reviews.llvm.org/D80020
Amy Kwan